fed up with those stupid warnings

[mmotm.git] / kernel / utrace.c

/*
 * utrace infrastructure interface for debugging user processes
 *
 * Copyright (C) 2006-2009 Red Hat, Inc.  All rights reserved.
 *
 * This copyrighted material is made available to anyone wishing to use,
 * modify, copy, or redistribute it subject to the terms and conditions
 * of the GNU General Public License v.2.
 *
 * Red Hat Author: Roland McGrath.
 */

#include <linux/utrace.h>
#include <linux/tracehook.h>
#include <linux/regset.h>
#include <asm/syscall.h>
#include <linux/ptrace.h>
#include <linux/err.h>
#include <linux/sched.h>
#include <linux/freezer.h>
#include <linux/module.h>
#include <linux/init.h>
#include <linux/slab.h>
#include <linux/seq_file.h>


/*
 * Rules for 'struct utrace', defined in <linux/utrace_struct.h>
 * but used entirely privately in this file.
 *
 * The common event reporting loops are done by the task making the
 * report without ever taking any locks.  To facilitate this, the two
 * lists @attached and @attaching work together for smooth asynchronous
 * attaching with low overhead.  Modifying either list requires @lock.
 * The @attaching list can be modified any time while holding @lock.
 * New engines being attached always go on this list.
 *
 * The @attached list is what the task itself uses for its reporting
 * loops.  When the task itself is not quiescent, it can use the
 * @attached list without taking any lock.  Nobody may modify the list
 * when the task is not quiescent.  When it is quiescent, that means
 * that it won't run again without taking @lock itself before using
 * the list.
 *
 * At each place where we know the task is quiescent (or it's current),
 * while holding @lock, we call splice_attaching(), below.  This moves
 * the @attaching list members on to the end of the @attached list.
 * Since this happens at the start of any reporting pass, any new
 * engines attached asynchronously go on the stable @attached list
 * in time to have their callbacks seen.
 */

static struct kmem_cache *utrace_engine_cachep;
static const struct utrace_engine_ops utrace_detached_ops; /* forward decl */

static int __init utrace_init(void)
{
        utrace_engine_cachep = KMEM_CACHE(utrace_engine, SLAB_PANIC);
        return 0;
}
module_init(utrace_init);

/*
 * This is called with @utrace->lock held when the task is safely
 * quiescent, i.e. it won't consult utrace->attached without the lock.
 * Move any engines attached asynchronously from @utrace->attaching
 * onto the @utrace->attached list.
 */
static void splice_attaching(struct utrace *utrace)
{
        list_splice_tail_init(&utrace->attaching, &utrace->attached);
}

/*
 * This is the exported function used by the utrace_engine_put() inline.
 */
void __utrace_engine_release(struct kref *kref)
{
        struct utrace_engine *engine = container_of(kref, struct utrace_engine,
                                                    kref);
        BUG_ON(!list_empty(&engine->entry));
        kmem_cache_free(utrace_engine_cachep, engine);
}
EXPORT_SYMBOL_GPL(__utrace_engine_release);

static bool engine_matches(struct utrace_engine *engine, int flags,
                           const struct utrace_engine_ops *ops, void *data)
{
        if ((flags & UTRACE_ATTACH_MATCH_OPS) && engine->ops != ops)
                return false;
        if ((flags & UTRACE_ATTACH_MATCH_DATA) && engine->data != data)
                return false;
        return engine->ops && engine->ops != &utrace_detached_ops;
}

static struct utrace_engine *matching_engine(
        struct utrace *utrace, int flags,
        const struct utrace_engine_ops *ops, void *data)
{
        struct utrace_engine *engine;
        list_for_each_entry(engine, &utrace->attached, entry)
                if (engine_matches(engine, flags, ops, data))
                        return engine;
        list_for_each_entry(engine, &utrace->attaching, entry)
                if (engine_matches(engine, flags, ops, data))
                        return engine;
        return NULL;
}

/*
 * Called without locks, when we might be the first utrace engine to attach.
 * If this is a newborn thread and we are not the creator, we have to wait
 * for it.  The creator gets the first chance to attach.  The PF_STARTING
 * flag is cleared after its report_clone hook has had a chance to run.
 */
static inline int utrace_attach_delay(struct task_struct *target)
{
        if ((target->flags & PF_STARTING) &&
            current->utrace.cloning != target)
                do {
                        schedule_timeout_interruptible(1);
                        if (signal_pending(current))
                                return -ERESTARTNOINTR;
                } while (target->flags & PF_STARTING);

        return 0;
}

/*
 * Enqueue @engine, or maybe don't if UTRACE_ATTACH_EXCLUSIVE.
 */
static int utrace_add_engine(struct task_struct *target,
                             struct utrace *utrace,
                             struct utrace_engine *engine,
                             int flags,
                             const struct utrace_engine_ops *ops,
                             void *data)
{
        int ret;

        spin_lock(&utrace->lock);

        if (utrace->reap) {
                /*
                 * Already entered utrace_release_task(), cannot attach now.
                 */
                ret = -ESRCH;
        } else if ((flags & UTRACE_ATTACH_EXCLUSIVE) &&
            unlikely(matching_engine(utrace, flags, ops, data))) {
                ret = -EEXIST;
        } else {
                /*
                 * Put the new engine on the pending ->attaching list.
                 * Make sure it gets onto the ->attached list by the next
                 * time it's examined.
                 *
                 * When target == current, it would be safe just to call
                 * splice_attaching() right here.  But if we're inside a
                 * callback, that would mean the new engine also gets
                 * notified about the event that precipitated its own
                 * creation.  This is not what the user wants.
                 *
                 * Setting ->report ensures that start_report() takes the
                 * lock and does it next time.  Whenever setting ->report,
                 * we must maintain the invariant that TIF_NOTIFY_RESUME is
                 * also set.  Otherwise utrace_control() or utrace_do_stop()
                 * might skip setting TIF_NOTIFY_RESUME upon seeing ->report
                 * already set, and we'd miss a necessary callback.
                 *
                 * In case we had no engines before, make sure that
                 * utrace_flags is not zero when tracehook_notify_resume()
                 * checks.  That would bypass utrace reporting clearing
                 * TIF_NOTIFY_RESUME, and thus violate the same invariant.
                 */
                target->utrace_flags |= UTRACE_EVENT(REAP);
                list_add_tail(&engine->entry, &utrace->attaching);
                utrace->report = 1;
                set_notify_resume(target);

                ret = 0;
        }

        spin_unlock(&utrace->lock);

        return ret;
}

/**
 * utrace_attach_task - attach new engine, or look up an attached engine
 * @target:     thread to attach to
 * @flags:      flag bits combined with OR, see below
 * @ops:        callback table for new engine
 * @data:       engine private data pointer
 *
 * The caller must ensure that the @target thread does not get freed,
 * i.e. hold a ref or be its parent.  It is always safe to call this
 * on @current, or on the @child pointer in a @report_clone callback.
 * For most other cases, it's easier to use utrace_attach_pid() instead.
 *
 * UTRACE_ATTACH_CREATE:
 * Create a new engine.  If %UTRACE_ATTACH_CREATE is not specified, you
 * only look up an existing engine already attached to the thread.
 *
 * UTRACE_ATTACH_EXCLUSIVE:
 * Attempting to attach a second (matching) engine fails with -%EEXIST.
 *
 * UTRACE_ATTACH_MATCH_OPS: Only consider engines matching @ops.
 * UTRACE_ATTACH_MATCH_DATA: Only consider engines matching @data.
 */
struct utrace_engine *utrace_attach_task(
        struct task_struct *target, int flags,
        const struct utrace_engine_ops *ops, void *data)
{
        struct utrace *utrace;
        struct utrace_engine *engine;
        int ret;

        utrace = &target->utrace;

        if (unlikely(target->exit_state == EXIT_DEAD)) {
                /*
                 * The target has already been reaped.
                 * Check this early, though it's not synchronized.
                 * utrace_add_engine() will do the final check.
                 */
                if (!(flags & UTRACE_ATTACH_CREATE))
                        return ERR_PTR(-ENOENT);
                return ERR_PTR(-ESRCH);
        }

        if (!(flags & UTRACE_ATTACH_CREATE)) {
                spin_lock(&utrace->lock);
                engine = matching_engine(utrace, flags, ops, data);
                if (engine)
                        utrace_engine_get(engine);
                spin_unlock(&utrace->lock);
                return engine ?: ERR_PTR(-ENOENT);
        }

        if (unlikely(!ops) || unlikely(ops == &utrace_detached_ops))
                return ERR_PTR(-EINVAL);

        if (unlikely(target->flags & PF_KTHREAD))
                /*
                 * Silly kernel, utrace is for users!
                 */
                return ERR_PTR(-EPERM);

        engine = kmem_cache_alloc(utrace_engine_cachep, GFP_KERNEL);
        if (unlikely(!engine))
                return ERR_PTR(-ENOMEM);

        /*
         * Initialize the new engine structure.  It starts out with two
         * refs: one ref to return, and one ref for being attached.
         */
        kref_set(&engine->kref, 2);
        engine->flags = 0;
        engine->ops = ops;
        engine->data = data;

        ret = utrace_attach_delay(target);
        if (likely(!ret))
                ret = utrace_add_engine(target, utrace, engine,
                                        flags, ops, data);

        if (unlikely(ret)) {
                kmem_cache_free(utrace_engine_cachep, engine);
                engine = ERR_PTR(ret);
        }

        return engine;
}
EXPORT_SYMBOL_GPL(utrace_attach_task);

/**
 * utrace_attach_pid - attach new engine, or look up an attached engine
 * @pid:        &struct pid pointer representing thread to attach to
 * @flags:      flag bits combined with OR, see utrace_attach_task()
 * @ops:        callback table for new engine
 * @data:       engine private data pointer
 *
 * This is the same as utrace_attach_task(), but takes a &struct pid
 * pointer rather than a &struct task_struct pointer.  The caller must
 * hold a ref on @pid, but does not need to worry about the task
 * staying valid.  If it's been reaped so that @pid points nowhere,
 * then this call returns -%ESRCH.
 */
struct utrace_engine *utrace_attach_pid(
        struct pid *pid, int flags,
        const struct utrace_engine_ops *ops, void *data)
{
        struct utrace_engine *engine = ERR_PTR(-ESRCH);
        struct task_struct *task = get_pid_task(pid, PIDTYPE_PID);
        if (task) {
                engine = utrace_attach_task(task, flags, ops, data);
                put_task_struct(task);
        }
        return engine;
}
EXPORT_SYMBOL_GPL(utrace_attach_pid);

/*
 * When an engine is detached, the target thread may still see it and
 * make callbacks until it quiesces.  We install a special ops vector
 * with these two callbacks.  When the target thread quiesces, it can
 * safely free the engine itself.  For any event we will always get
 * the report_quiesce() callback first, so we only need this one
 * pointer to be set.  The only exception is report_reap(), so we
 * supply that callback too.
 */
static u32 utrace_detached_quiesce(enum utrace_resume_action action,
                                   struct utrace_engine *engine,
                                   struct task_struct *task,
                                   unsigned long event)
{
        return UTRACE_DETACH;
}

static void utrace_detached_reap(struct utrace_engine *engine,
                                 struct task_struct *task)
{
}

static const struct utrace_engine_ops utrace_detached_ops = {
        .report_quiesce = &utrace_detached_quiesce,
        .report_reap = &utrace_detached_reap
};

/*
 * After waking up from TASK_TRACED, clear bookkeeping in @utrace.
 * Returns true if we were woken up prematurely by SIGKILL.
 */
static inline bool finish_utrace_stop(struct task_struct *task,
                                      struct utrace *utrace)
{
        bool killed = false;

        /*
         * utrace_wakeup() clears @utrace->stopped before waking us up.
         * We're officially awake if it's clear.
         */
        spin_lock(&utrace->lock);
        if (unlikely(utrace->stopped)) {
                /*
                 * If we're here with it still set, it must have been
                 * signal_wake_up() instead, waking us up for a SIGKILL.
                 */
                spin_lock_irq(&task->sighand->siglock);
                WARN_ON(!sigismember(&task->pending.signal, SIGKILL));
                spin_unlock_irq(&task->sighand->siglock);
                utrace->stopped = 0;
                killed = true;
        }
        spin_unlock(&utrace->lock);

        return killed;
}

/*
 * Perform %UTRACE_STOP, i.e. block in TASK_TRACED until woken up.
 * @task == current, @utrace == current->utrace, which is not locked.
 * Return true if we were woken up by SIGKILL even though some utrace
 * engine may still want us to stay stopped.
 */
static bool utrace_stop(struct task_struct *task, struct utrace *utrace,
                        bool report)
{
        bool killed;

        /*
         * @utrace->stopped is the flag that says we are safely
         * inside this function.  It should never be set on entry.
         */
        BUG_ON(utrace->stopped);

        /*
         * The siglock protects us against signals.  As well as SIGKILL
         * waking us up, we must synchronize with the signal bookkeeping
         * for stop signals and SIGCONT.
         */
        spin_lock(&utrace->lock);
        spin_lock_irq(&task->sighand->siglock);

        if (unlikely(sigismember(&task->pending.signal, SIGKILL))) {
                spin_unlock_irq(&task->sighand->siglock);
                spin_unlock(&utrace->lock);
                return true;
        }

        if (report) {
                /*
                 * Ensure a reporting pass when we're resumed.
                 */
                utrace->report = 1;
                set_thread_flag(TIF_NOTIFY_RESUME);
        }

        utrace->stopped = 1;
        __set_current_state(TASK_TRACED);

        /*
         * If there is a group stop in progress,
         * we must participate in the bookkeeping.
         */
        if (task->signal->group_stop_count > 0)
                --task->signal->group_stop_count;

        spin_unlock_irq(&task->sighand->siglock);
        spin_unlock(&utrace->lock);

        schedule();

        /*
         * While in TASK_TRACED, we were considered "frozen enough".
         * Now that we woke up, it's crucial if we're supposed to be
         * frozen that we freeze now before running anything substantial.
         */
        try_to_freeze();

        killed = finish_utrace_stop(task, utrace);

        /*
         * While we were in TASK_TRACED, complete_signal() considered
         * us "uninterested" in signal wakeups.  Now make sure our
         * TIF_SIGPENDING state is correct for normal running.
         */
        spin_lock_irq(&task->sighand->siglock);
        recalc_sigpending();
        spin_unlock_irq(&task->sighand->siglock);

        return killed;
}

/*
 * The caller has to hold a ref on the engine.  If the attached flag is
 * true (all but utrace_barrier() calls), the engine is supposed to be
 * attached.  If the attached flag is false (utrace_barrier() only),
 * then return -ERESTARTSYS for an engine marked for detach but not yet
 * fully detached.  The task pointer can be invalid if the engine is
 * detached.
 *
 * Get the utrace lock for the target task.
 * Returns the struct if locked, or ERR_PTR(-errno).
 *
 * This has to be robust against races with:
 *      utrace_control(target, UTRACE_DETACH) calls
 *      UTRACE_DETACH after reports
 *      utrace_report_death
 *      utrace_release_task
 */
static struct utrace *get_utrace_lock(struct task_struct *target,
                                      struct utrace_engine *engine,
                                      bool attached)
        __acquires(utrace->lock)
{
        struct utrace *utrace;

        rcu_read_lock();

        /*
         * If this engine was already detached, bail out before we look at
         * the task_struct pointer at all.  If it's detached after this
         * check, then RCU is still keeping this task_struct pointer valid.
         *
         * The ops pointer is NULL when the engine is fully detached.
         * It's &utrace_detached_ops when it's marked detached but still
         * on the list.  In the latter case, utrace_barrier() still works,
         * since the target might be in the middle of an old callback.
         */
        if (unlikely(!engine->ops)) {
                rcu_read_unlock();
                return ERR_PTR(-ESRCH);
        }

        if (unlikely(engine->ops == &utrace_detached_ops)) {
                rcu_read_unlock();
                return attached ? ERR_PTR(-ESRCH) : ERR_PTR(-ERESTARTSYS);
        }

        utrace = &target->utrace;
        if (unlikely(target->exit_state == EXIT_DEAD)) {
                /*
                 * If all engines detached already, utrace is clear.
                 * Otherwise, we're called after utrace_release_task might
                 * have started.  A call to this engine's report_reap
                 * callback might already be in progress.
                 */
                utrace = ERR_PTR(-ESRCH);
        } else {
                spin_lock(&utrace->lock);
                if (unlikely(!engine->ops) ||
                    unlikely(engine->ops == &utrace_detached_ops)) {
                        /*
                         * By the time we got the utrace lock,
                         * it had been reaped or detached already.
                         */
                        spin_unlock(&utrace->lock);
                        utrace = ERR_PTR(-ESRCH);
                        if (!attached && engine->ops == &utrace_detached_ops)
                                utrace = ERR_PTR(-ERESTARTSYS);
                }
        }
        rcu_read_unlock();

        return utrace;
}

/*
 * Now that we don't hold any locks, run through any
 * detached engines and free their references.  Each
 * engine had one implicit ref while it was attached.
 */
static void put_detached_list(struct list_head *list)
{
        struct utrace_engine *engine, *next;
        list_for_each_entry_safe(engine, next, list, entry) {
                list_del_init(&engine->entry);
                utrace_engine_put(engine);
        }
}

/*
 * Called with utrace->lock held.
 * Notify and clean up all engines, then free utrace.
 */
static void utrace_reap(struct task_struct *target, struct utrace *utrace)
        __releases(utrace->lock)
{
        struct utrace_engine *engine, *next;
        const struct utrace_engine_ops *ops;
        LIST_HEAD(detached);

restart:
        splice_attaching(utrace);
        list_for_each_entry_safe(engine, next, &utrace->attached, entry) {
                ops = engine->ops;
                engine->ops = NULL;
                list_move(&engine->entry, &detached);

                /*
                 * If it didn't need a callback, we don't need to drop
                 * the lock.  Now nothing else refers to this engine.
                 */
                if (!(engine->flags & UTRACE_EVENT(REAP)))
                        continue;

                /*
                 * This synchronizes with utrace_barrier().  Since we
                 * need the utrace->lock here anyway (unlike the other
                 * reporting loops), we don't need any memory barrier
                 * as utrace_barrier() holds the lock.
                 */
                utrace->reporting = engine;
                spin_unlock(&utrace->lock);

                (*ops->report_reap)(engine, target);

                utrace->reporting = NULL;

                put_detached_list(&detached);

                spin_lock(&utrace->lock);
                goto restart;
        }

        spin_unlock(&utrace->lock);

        put_detached_list(&detached);
}

/*
 * Called by release_task.  After this, target->utrace must be cleared.
 */
void utrace_release_task(struct task_struct *target)
{
        struct utrace *utrace;

        utrace = &target->utrace;

        spin_lock(&utrace->lock);

        utrace->reap = 1;

        if (!(target->utrace_flags & _UTRACE_DEATH_EVENTS)) {
                utrace_reap(target, utrace); /* Unlocks and frees.  */
                return;
        }

        /*
         * The target will do some final callbacks but hasn't
         * finished them yet.  We know because it clears these
         * event bits after it's done.  Instead of cleaning up here
         * and requiring utrace_report_death to cope with it, we
         * delay the REAP report and the teardown until after the
         * target finishes its death reports.
         */

        spin_unlock(&utrace->lock);
}

/*
 * We use an extra bit in utrace_engine.flags past the event bits,
 * to record whether the engine is keeping the target thread stopped.
 */
#define ENGINE_STOP             (1UL << _UTRACE_NEVENTS)

static void mark_engine_wants_stop(struct utrace_engine *engine)
{
        engine->flags |= ENGINE_STOP;
}

static void clear_engine_wants_stop(struct utrace_engine *engine)
{
        engine->flags &= ~ENGINE_STOP;
}

static bool engine_wants_stop(struct utrace_engine *engine)
{
        return (engine->flags & ENGINE_STOP) != 0;
}

/**
 * utrace_set_events - choose which event reports a tracing engine gets
 * @target:             thread to affect
 * @engine:             attached engine to affect
 * @events:             new event mask
 *
 * This changes the set of events for which @engine wants callbacks made.
 *
 * This fails with -%EALREADY and does nothing if you try to clear
 * %UTRACE_EVENT(%DEATH) when the @report_death callback may already have
 * begun, if you try to clear %UTRACE_EVENT(%REAP) when the @report_reap
 * callback may already have begun, or if you try to newly set
 * %UTRACE_EVENT(%DEATH) or %UTRACE_EVENT(%QUIESCE) when @target is
 * already dead or dying.
 *
 * This can fail with -%ESRCH when @target has already been detached,
 * including forcible detach on reaping.
 *
 * If @target was stopped before the call, then after a successful call,
 * no event callbacks not requested in @events will be made; if
 * %UTRACE_EVENT(%QUIESCE) is included in @events, then a @report_quiesce
 * callback will be made when @target resumes.  If @target was not stopped,
 * and was about to make a callback to @engine, this returns -%EINPROGRESS.
 * In this case, the callback in progress might be one excluded from the
 * new @events setting.  When this returns zero, you can be sure that no
 * event callbacks you've disabled in @events can be made.
 *
 * To synchronize after an -%EINPROGRESS return, see utrace_barrier().
 *
 * When @target is @current, -%EINPROGRESS is not returned.  But
 * note that a newly-created engine will not receive any callbacks
 * related to an event notification already in progress.  This call
 * enables @events callbacks to be made as soon as @engine becomes
 * eligible for any callbacks, see utrace_attach_task().
 *
 * These rules provide for coherent synchronization based on %UTRACE_STOP,
 * even when %SIGKILL is breaking its normal simple rules.
 */
int utrace_set_events(struct task_struct *target,
                      struct utrace_engine *engine,
                      unsigned long events)
{
        struct utrace *utrace;
        unsigned long old_flags, old_utrace_flags, set_utrace_flags;
        int ret;

        utrace = get_utrace_lock(target, engine, true);
        if (unlikely(IS_ERR(utrace)))
                return PTR_ERR(utrace);

        old_utrace_flags = target->utrace_flags;
        set_utrace_flags = events;
        old_flags = engine->flags;

        if (target->exit_state &&
            (((events & ~old_flags) & _UTRACE_DEATH_EVENTS) ||
             (utrace->death &&
              ((old_flags & ~events) & _UTRACE_DEATH_EVENTS)) ||
             (utrace->reap && ((old_flags & ~events) & UTRACE_EVENT(REAP))))) {
                spin_unlock(&utrace->lock);
                return -EALREADY;
        }

        /*
         * When setting these flags, it's essential that we really
         * synchronize with exit_notify().  They cannot be set after
         * exit_notify() takes the tasklist_lock.  By holding the read
         * lock here while setting the flags, we ensure that the calls
         * to tracehook_notify_death() and tracehook_report_death() will
         * see the new flags.  This ensures that utrace_release_task()
         * knows positively that utrace_report_death() will be called or
         * that it won't.
         */
        if ((set_utrace_flags & ~old_utrace_flags) & _UTRACE_DEATH_EVENTS) {
                read_lock(&tasklist_lock);
                if (unlikely(target->exit_state)) {
                        read_unlock(&tasklist_lock);
                        spin_unlock(&utrace->lock);
                        return -EALREADY;
                }
                target->utrace_flags |= set_utrace_flags;
                read_unlock(&tasklist_lock);
        }

        engine->flags = events | (engine->flags & ENGINE_STOP);
        target->utrace_flags |= set_utrace_flags;

        if ((set_utrace_flags & UTRACE_EVENT_SYSCALL) &&
            !(old_utrace_flags & UTRACE_EVENT_SYSCALL))
                set_tsk_thread_flag(target, TIF_SYSCALL_TRACE);

        ret = 0;
        if (!utrace->stopped && target != current) {
                /*
                 * This barrier ensures that our engine->flags changes
                 * have hit before we examine utrace->reporting,
                 * pairing with the barrier in start_callback().  If
                 * @target has not yet hit finish_callback() to clear
                 * utrace->reporting, we might be in the middle of a
                 * callback to @engine.
                 */
                smp_mb();
                if (utrace->reporting == engine)
                        ret = -EINPROGRESS;
        }

        spin_unlock(&utrace->lock);

        return ret;
}
EXPORT_SYMBOL_GPL(utrace_set_events);

/*
 * Asynchronously mark an engine as being detached.
 *
 * This must work while the target thread races with us doing
 * start_callback(), defined below.  It uses smp_rmb() between checking
 * @engine->flags and using @engine->ops.  Here we change @engine->ops
 * first, then use smp_wmb() before changing @engine->flags.  This ensures
 * it can check the old flags before using the old ops, or check the old
 * flags before using the new ops, or check the new flags before using the
 * new ops, but can never check the new flags before using the old ops.
 * Hence, utrace_detached_ops might be used with any old flags in place.
 * It has report_quiesce() and report_reap() callbacks to handle all cases.
 */
static void mark_engine_detached(struct utrace_engine *engine)
{
        engine->ops = &utrace_detached_ops;
        smp_wmb();
        engine->flags = UTRACE_EVENT(QUIESCE);
}

/*
 * Get @target to stop and return true if it is already stopped now.
 * If we return false, it will make some event callback soonish.
 * Called with @utrace locked.
 */
static bool utrace_do_stop(struct task_struct *target, struct utrace *utrace)
{
        bool stopped = false;

        spin_lock_irq(&target->sighand->siglock);
        if (unlikely(target->exit_state)) {
                /*
                 * On the exit path, it's only truly quiescent
                 * if it has already been through
                 * utrace_report_death(), or never will.
                 */
                if (!(target->utrace_flags & _UTRACE_DEATH_EVENTS))
                        utrace->stopped = stopped = true;
        } else if (task_is_stopped(target)) {
                /*
                 * Stopped is considered quiescent; when it wakes up, it will
                 * go through utrace_get_signal() before doing anything else.
                 */
                utrace->stopped = stopped = true;
        } else if (!utrace->report && !utrace->interrupt) {
                utrace->report = 1;
                set_notify_resume(target);
        }
        spin_unlock_irq(&target->sighand->siglock);

        return stopped;
}

/*
 * If the target is not dead it should not be in tracing
 * stop any more.  Wake it unless it's in job control stop.
 *
 * Called with @utrace->lock held and @utrace->stopped set.
 */
static void utrace_wakeup(struct task_struct *target, struct utrace *utrace)
{
        struct sighand_struct *sighand;
        unsigned long irqflags;

        utrace->stopped = 0;

        sighand = lock_task_sighand(target, &irqflags);
        if (unlikely(!sighand))
                return;

        if (likely(task_is_stopped_or_traced(target))) {
                if (target->signal->flags & SIGNAL_STOP_STOPPED)
                        target->state = TASK_STOPPED;
                else
                        wake_up_state(target, __TASK_STOPPED | __TASK_TRACED);
        }

        unlock_task_sighand(target, &irqflags);
}

/*
 * This is called when there might be some detached engines on the list or
 * some stale bits in @task->utrace_flags.  Clean them up and recompute the
 * flags.
 *
 * @action is NULL when @task is stopped and @utrace->stopped is set; wake
 * it up if it should not be.  @action is set when @task is current; if
 * we're fully detached, reset *@action to UTRACE_RESUME.
 *
 * Called with @utrace->lock held, returns with it released.
 * After this returns, @utrace might be freed if everything detached.
 */
static void utrace_reset(struct task_struct *task, struct utrace *utrace,
                         enum utrace_resume_action *action)
        __releases(utrace->lock)
{
        struct utrace_engine *engine, *next;
        unsigned long flags = 0;
        LIST_HEAD(detached);
        bool wake = !action;
        BUG_ON(wake != (task != current));

        splice_attaching(utrace);

        /*
         * Update the set of events of interest from the union
         * of the interests of the remaining tracing engines.
         * For any engine marked detached, remove it from the list.
         * We'll collect them on the detached list.
         */
        list_for_each_entry_safe(engine, next, &utrace->attached, entry) {
                if (engine->ops == &utrace_detached_ops) {
                        engine->ops = NULL;
                        list_move(&engine->entry, &detached);
                } else {
                        flags |= engine->flags | UTRACE_EVENT(REAP);
                        wake = wake && !engine_wants_stop(engine);
                }
        }

        if (task->exit_state) {
                /*
                 * Once it's already dead, we never install any flags
                 * except REAP.  When ->exit_state is set and events
                 * like DEATH are not set, then they never can be set.
                 * This ensures that utrace_release_task() knows
                 * positively that utrace_report_death() can never run.
                 */
                BUG_ON(utrace->death);
                flags &= UTRACE_EVENT(REAP);
                wake = false;
        } else if (!(flags & UTRACE_EVENT_SYSCALL) &&
                   test_tsk_thread_flag(task, TIF_SYSCALL_TRACE)) {
                clear_tsk_thread_flag(task, TIF_SYSCALL_TRACE);
        }

        task->utrace_flags = flags;

        if (wake)
                utrace_wakeup(task, utrace);

        /*
         * If any engines are left, we're done.
         */
        spin_unlock(&utrace->lock);
        if (!flags) {
                /*
                 * No more engines, cleared out the utrace.
                 */

                if (action)
                        *action = UTRACE_RESUME;
        }

        put_detached_list(&detached);
}

/*
 * You can't do anything to a dead task but detach it.
 * If release_task() has been called, you can't do that.
 *
 * On the exit path, DEATH and QUIESCE event bits are set only
 * before utrace_report_death() has taken the lock.  At that point,
 * the death report will come soon, so disallow detach until it's
 * done.  This prevents us from racing with it detaching itself.
 *
 * Called with utrace->lock held, when @target->exit_state is nonzero.
 */
static inline int utrace_control_dead(struct task_struct *target,
                                      struct utrace *utrace,
                                      enum utrace_resume_action action)
{
        if (action != UTRACE_DETACH || unlikely(utrace->reap))
                return -ESRCH;

        if (unlikely(utrace->death))
                /*
                 * We have already started the death report.  We can't
                 * prevent the report_death and report_reap callbacks,
                 * so tell the caller they will happen.
                 */
                return -EALREADY;

        return 0;
}

/**
 * utrace_control - control a thread being traced by a tracing engine
 * @target:             thread to affect
 * @engine:             attached engine to affect
 * @action:             &enum utrace_resume_action for thread to do
 *
 * This is how a tracing engine asks a traced thread to do something.
 * This call is controlled by the @action argument, which has the
 * same meaning as the &enum utrace_resume_action value returned by
 * event reporting callbacks.
 *
 * If @target is already dead (@target->exit_state nonzero),
 * all actions except %UTRACE_DETACH fail with -%ESRCH.
 *
 * The following sections describe each option for the @action argument.
 *
 * UTRACE_DETACH:
 *
 * After this, the @engine data structure is no longer accessible,
 * and the thread might be reaped.  The thread will start running
 * again if it was stopped and no longer has any attached engines
 * that want it stopped.
 *
 * If the @report_reap callback may already have begun, this fails
 * with -%ESRCH.  If the @report_death callback may already have
 * begun, this fails with -%EALREADY.
 *
 * If @target is not already stopped, then a callback to this engine
 * might be in progress or about to start on another CPU.  If so,
 * then this returns -%EINPROGRESS; the detach happens as soon as
 * the pending callback is finished.  To synchronize after an
 * -%EINPROGRESS return, see utrace_barrier().
 *
 * If @target is properly stopped before utrace_control() is called,
 * then after successful return it's guaranteed that no more callbacks
 * to the @engine->ops vector will be made.
 *
 * The only exception is %SIGKILL (and exec or group-exit by another
 * thread in the group), which can cause asynchronous @report_death
 * and/or @report_reap callbacks even when %UTRACE_STOP was used.
 * (In that event, this fails with -%ESRCH or -%EALREADY, see above.)
 *
 * UTRACE_STOP:
 * This asks that @target stop running.  This returns 0 only if
 * @target is already stopped, either for tracing or for job
 * control.  Then @target will remain stopped until another
 * utrace_control() call is made on @engine; @target can be woken
 * only by %SIGKILL (or equivalent, such as exec or termination by
 * another thread in the same thread group).
 *
 * This returns -%EINPROGRESS if @target is not already stopped.
 * Then the effect is like %UTRACE_REPORT.  A @report_quiesce or
 * @report_signal callback will be made soon.  Your callback can
 * then return %UTRACE_STOP to keep @target stopped.
 *
 * This does not interrupt system calls in progress, including ones
 * that sleep for a long time.  For that, use %UTRACE_INTERRUPT.
 * To interrupt system calls and then keep @target stopped, your
 * @report_signal callback can return %UTRACE_STOP.
 *
 * UTRACE_RESUME:
 *
 * Just let @target continue running normally, reversing the effect
 * of a previous %UTRACE_STOP.  If another engine is keeping @target
 * stopped, then it remains stopped until all engines let it resume.
 * If @target was not stopped, this has no effect.
 *
 * UTRACE_REPORT:
 *
 * This is like %UTRACE_RESUME, but also ensures that there will be
 * a @report_quiesce or @report_signal callback made soon.  If
 * @target had been stopped, then there will be a callback before it
 * resumes running normally.  If another engine is keeping @target
 * stopped, then there might be no callbacks until all engines let
 * it resume.
 *
 * UTRACE_INTERRUPT:
 *
 * This is like %UTRACE_REPORT, but ensures that @target will make a
 * @report_signal callback before it resumes or delivers signals.
 * If @target was in a system call or about to enter one, work in
 * progress will be interrupted as if by %SIGSTOP.  If another
 * engine is keeping @target stopped, then there might be no
 * callbacks until all engines let it resume.
 *
 * This gives @engine an opportunity to introduce a forced signal
 * disposition via its @report_signal callback.
 *
 * UTRACE_SINGLESTEP:
 *
 * It's invalid to use this unless arch_has_single_step() returned true.
 * This is like %UTRACE_RESUME, but resumes for one user instruction
 * only.  It's invalid to use this in utrace_control() unless @target
 * had been stopped by @engine previously.
 *
 * Note that passing %UTRACE_SINGLESTEP or %UTRACE_BLOCKSTEP to
 * utrace_control() or returning it from an event callback alone does
 * not necessarily ensure that stepping will be enabled.  If there are
 * more callbacks made to any engine before returning to user mode,
 * then the resume action is chosen only by the last set of callbacks.
 * To be sure, enable %UTRACE_EVENT(%QUIESCE) and look for the
 * @report_quiesce callback with a zero event mask, or the
 * @report_signal callback with %UTRACE_SIGNAL_REPORT.
 *
 * UTRACE_BLOCKSTEP:
 *
 * It's invalid to use this unless arch_has_block_step() returned true.
 * This is like %UTRACE_SINGLESTEP, but resumes for one whole basic
 * block of user instructions.
 *
 * %UTRACE_BLOCKSTEP devolves to %UTRACE_SINGLESTEP when another
 * tracing engine is using %UTRACE_SINGLESTEP at the same time.
 */
int utrace_control(struct task_struct *target,
                   struct utrace_engine *engine,
                   enum utrace_resume_action action)
{
        struct utrace *utrace;
        bool resume;
        int ret;

        if (unlikely(action > UTRACE_DETACH))
                return -EINVAL;

        utrace = get_utrace_lock(target, engine, true);
        if (unlikely(IS_ERR(utrace)))
                return PTR_ERR(utrace);

        if (target->exit_state) {
                ret = utrace_control_dead(target, utrace, action);
                if (ret) {
                        spin_unlock(&utrace->lock);
                        return ret;
                }
        }

        resume = utrace->stopped;
        ret = 0;

        clear_engine_wants_stop(engine);
        switch (action) {
        case UTRACE_STOP:
                mark_engine_wants_stop(engine);
                if (!resume && !utrace_do_stop(target, utrace))
                        ret = -EINPROGRESS;
                resume = false;
                break;

        case UTRACE_DETACH:
                mark_engine_detached(engine);
                resume = resume || utrace_do_stop(target, utrace);
                if (!resume) {
                        /*
                         * As in utrace_set_events(), this barrier ensures
                         * that our engine->flags changes have hit before we
                         * examine utrace->reporting, pairing with the barrier
                         * in start_callback().  If @target has not yet hit
                         * finish_callback() to clear utrace->reporting, we
                         * might be in the middle of a callback to @engine.
                         */
                        smp_mb();
                        if (utrace->reporting == engine)
                                ret = -EINPROGRESS;
                        break;
                }
                /* Fall through.  */

        case UTRACE_RESUME:
                /*
                 * This and all other cases imply resuming if stopped.
                 * There might not be another report before it just
                 * resumes, so make sure single-step is not left set.
                 */
                if (likely(resume))
                        user_disable_single_step(target);
                break;

        case UTRACE_REPORT:
                /*
                 * Make the thread call tracehook_notify_resume() soon.
                 * But don't bother if it's already been interrupted.
                 * In that case, utrace_get_signal() will be reporting soon.
                 */
                if (!utrace->report && !utrace->interrupt) {
                        utrace->report = 1;
                        set_notify_resume(target);
                }
                break;

        case UTRACE_INTERRUPT:
                /*
                 * Make the thread call tracehook_get_signal() soon.
                 */
                if (utrace->interrupt)
                        break;
                utrace->interrupt = 1;

                /*
                 * If it's not already stopped, interrupt it now.
                 * We need the siglock here in case it calls
                 * recalc_sigpending() and clears its own
                 * TIF_SIGPENDING.  By taking the lock, we've
                 * serialized any later recalc_sigpending() after
                 * our setting of utrace->interrupt to force it on.
                 */
                if (resume) {
                        /*
                         * This is really just to keep the invariant
                         * that TIF_SIGPENDING is set with utrace->interrupt.
                         * When it's stopped, we know it's always going
                         * through utrace_get_signal and will recalculate.
                         */
                        set_tsk_thread_flag(target, TIF_SIGPENDING);
                } else {
                        struct sighand_struct *sighand;
                        unsigned long irqflags;
                        sighand = lock_task_sighand(target, &irqflags);
                        if (likely(sighand)) {
                                signal_wake_up(target, 0);
                                unlock_task_sighand(target, &irqflags);
                        }
                }
                break;

        case UTRACE_BLOCKSTEP:
                /*
                 * Resume from stopped, step one block.
                 */
                if (unlikely(!arch_has_block_step())) {
                        WARN_ON(1);
                        /* Fall through to treat it as SINGLESTEP.  */
                } else if (likely(resume)) {
                        user_enable_block_step(target);
                        break;
                }

        case UTRACE_SINGLESTEP:
                /*
                 * Resume from stopped, step one instruction.
                 */
                if (unlikely(!arch_has_single_step())) {
                        WARN_ON(1);
                        resume = false;
                        ret = -EOPNOTSUPP;
                        break;
                }

                if (likely(resume))
                        user_enable_single_step(target);
                else
                        /*
                         * You were supposed to stop it before asking
                         * it to step.
                         */
                        ret = -EAGAIN;
                break;
        }

        /*
         * Let the thread resume running.  If it's not stopped now,
         * there is nothing more we need to do.
         */
        if (resume)
                utrace_reset(target, utrace, NULL);
        else
                spin_unlock(&utrace->lock);

        return ret;
}
EXPORT_SYMBOL_GPL(utrace_control);

/**
 * utrace_barrier - synchronize with simultaneous tracing callbacks
 * @target:             thread to affect
 * @engine:             engine to affect (can be detached)
 *
 * This blocks while @target might be in the midst of making a callback to
 * @engine.  It can be interrupted by signals and will return -%ERESTARTSYS.
 * A return value of zero means no callback from @target to @engine was
 * in progress.  Any effect of its return value (such as %UTRACE_STOP) has
 * already been applied to @engine.
 *
 * It's not necessary to keep the @target pointer alive for this call.
 * It's only necessary to hold a ref on @engine.  This will return
 * safely even if @target has been reaped and has no task refs.
 *
 * A successful return from utrace_barrier() guarantees its ordering
 * with respect to utrace_set_events() and utrace_control() calls.  If
 * @target was not properly stopped, event callbacks just disabled might
 * still be in progress; utrace_barrier() waits until there is no chance
 * an unwanted callback can be in progress.
 */
int utrace_barrier(struct task_struct *target, struct utrace_engine *engine)
{
        struct utrace *utrace;
        int ret = -ERESTARTSYS;

        if (unlikely(target == current))
                return 0;

        do {
                utrace = get_utrace_lock(target, engine, false);
                if (unlikely(IS_ERR(utrace))) {
                        ret = PTR_ERR(utrace);
                        if (ret != -ERESTARTSYS)
                                break;
                } else {
                        /*
                         * All engine state changes are done while
                         * holding the lock, i.e. before we get here.
                         * Since we have the lock, we only need to
                         * worry about @target making a callback.
                         * When it has entered start_callback() but
                         * not yet gotten to finish_callback(), we
                         * will see utrace->reporting == @engine.
                         * When @target doesn't take the lock, it uses
                         * barriers to order setting utrace->reporting
                         * before it examines the engine state.
                         */
                        if (utrace->reporting != engine)
                                ret = 0;
                        spin_unlock(&utrace->lock);
                        if (!ret)
                                break;
                }
                schedule_timeout_interruptible(1);
        } while (!signal_pending(current));

        return ret;
}
EXPORT_SYMBOL_GPL(utrace_barrier);

/*
 * This is local state used for reporting loops, perhaps optimized away.
 */
struct utrace_report {
        enum utrace_resume_action action;
        u32 result;
        bool detaches;
        bool reports;
        bool takers;
        bool killed;
};

#define INIT_REPORT(var) \
        struct utrace_report var = { UTRACE_RESUME, 0, \
                                     false, false, false, false }

/*
 * We are now making the report, so clear the flag saying we need one.
 */
static void start_report(struct utrace *utrace)
{
        BUG_ON(utrace->stopped);
        if (utrace->report) {
                spin_lock(&utrace->lock);
                utrace->report = 0;
                splice_attaching(utrace);
                spin_unlock(&utrace->lock);
        }
}

/*
 * Complete a normal reporting pass, pairing with a start_report() call.
 * This handles any UTRACE_DETACH or UTRACE_REPORT or UTRACE_INTERRUPT
 * returns from engine callbacks.  If any engine's last callback used
 * UTRACE_STOP, we do UTRACE_REPORT here to ensure we stop before user
 * mode.  If there were no callbacks made, it will recompute
 * @task->utrace_flags to avoid another false-positive.
 */
static void finish_report(struct utrace_report *report,
                          struct task_struct *task, struct utrace *utrace)
{
        bool clean = (report->takers && !report->detaches);

        if (report->action <= UTRACE_REPORT && !utrace->report) {
                spin_lock(&utrace->lock);
                utrace->report = 1;
                set_tsk_thread_flag(task, TIF_NOTIFY_RESUME);
        } else if (report->action == UTRACE_INTERRUPT && !utrace->interrupt) {
                spin_lock(&utrace->lock);
                utrace->interrupt = 1;
                set_tsk_thread_flag(task, TIF_SIGPENDING);
        } else if (clean) {
                return;
        } else {
                spin_lock(&utrace->lock);
        }

        if (clean)
                spin_unlock(&utrace->lock);
        else
                utrace_reset(task, utrace, &report->action);
}

/*
 * Apply the return value of one engine callback to @report.
 * Returns true if @engine detached and should not get any more callbacks.
 */
static bool finish_callback(struct utrace *utrace,
                            struct utrace_report *report,
                            struct utrace_engine *engine,
                            u32 ret)
{
        enum utrace_resume_action action = utrace_resume_action(ret);

        report->result = ret & ~UTRACE_RESUME_MASK;

        /*
         * If utrace_control() was used, treat that like UTRACE_DETACH here.
         */
        if (action == UTRACE_DETACH || engine->ops == &utrace_detached_ops) {
                engine->ops = &utrace_detached_ops;
                report->detaches = true;
        } else {
                if (action < report->action)
                        report->action = action;

                if (action == UTRACE_STOP) {
                        if (!engine_wants_stop(engine)) {
                                spin_lock(&utrace->lock);
                                mark_engine_wants_stop(engine);
                                spin_unlock(&utrace->lock);
                        }
                } else {
                        if (action == UTRACE_REPORT)
                                report->reports = true;

                        if (engine_wants_stop(engine)) {
                                spin_lock(&utrace->lock);
                                clear_engine_wants_stop(engine);
                                spin_unlock(&utrace->lock);
                        }
                }
        }

        /*
         * Now that we have applied the effect of the return value,
         * clear this so that utrace_barrier() can stop waiting.
         * A subsequent utrace_control() can stop or resume @engine
         * and know this was ordered after its callback's action.
         *
         * We don't need any barriers here because utrace_barrier()
         * takes utrace->lock.  If we touched engine->flags above,
         * the lock guaranteed this change was before utrace_barrier()
         * examined utrace->reporting.
         */
        utrace->reporting = NULL;

        /*
         * This is a good place to make sure tracing engines don't
         * introduce too much latency under voluntary preemption.
         */
        if (need_resched())
                cond_resched();

        return engine->ops == &utrace_detached_ops;
}

/*
 * Start the callbacks for @engine to consider @event (a bit mask).
 * This makes the report_quiesce() callback first.  If @engine wants
 * a specific callback for @event, we return the ops vector to use.
 * If not, we return NULL.  The return value from the ops->callback
 * function called should be passed to finish_callback().
 */
static const struct utrace_engine_ops *start_callback(
        struct utrace *utrace, struct utrace_report *report,
        struct utrace_engine *engine, struct task_struct *task,
        unsigned long event)
{
        const struct utrace_engine_ops *ops;
        unsigned long want;

        /*
         * This barrier ensures that we've set utrace->reporting before
         * we examine engine->flags or engine->ops.  utrace_barrier()
         * relies on this ordering to indicate that the effect of any
         * utrace_control() and utrace_set_events() calls is in place
         * by the time utrace->reporting can be seen to be NULL.
         */
        utrace->reporting = engine;
        smp_mb();

        /*
         * This pairs with the barrier in mark_engine_detached().
         * It makes sure that we never see the old ops vector with
         * the new flags, in case the original vector had no report_quiesce.
         */
        want = engine->flags;
        smp_rmb();
        ops = engine->ops;

        if (want & UTRACE_EVENT(QUIESCE)) {
                if (finish_callback(utrace, report, engine,
                                    (*ops->report_quiesce)(report->action,
                                                           engine, task,
                                                           event)))
                        return NULL;

                /*
                 * finish_callback() reset utrace->reporting after the
                 * quiesce callback.  Now we set it again (as above)
                 * before re-examining engine->flags, which could have
                 * been changed synchronously by ->report_quiesce or
                 * asynchronously by utrace_control() or utrace_set_events().
                 */
                utrace->reporting = engine;
                smp_mb();
                want = engine->flags;
        }

        if (want & ENGINE_STOP)
                report->action = UTRACE_STOP;

        if (want & event) {
                report->takers = true;
                return ops;
        }

        return NULL;
}

/*
 * Do a normal reporting pass for engines interested in @event.
 * @callback is the name of the member in the ops vector, and remaining
 * args are the extras it takes after the standard three args.
 */
#define REPORT(task, utrace, report, event, callback, ...)                    \
        do {                                                                  \
                start_report(utrace);                                         \
                REPORT_CALLBACKS(task, utrace, report, event, callback,       \
                                 (report)->action, engine, current,           \
                                 ## __VA_ARGS__);                             \
                finish_report(report, task, utrace);                          \
        } while (0)
#define REPORT_CALLBACKS(task, utrace, report, event, callback, ...)          \
        do {                                                                  \
                struct utrace_engine *engine;                                 \
                const struct utrace_engine_ops *ops;                          \
                list_for_each_entry(engine, &utrace->attached, entry) {       \
                        ops = start_callback(utrace, report, engine, task,    \
                                             event);                          \
                        if (!ops)                                             \
                                continue;                                     \
                        finish_callback(utrace, report, engine,               \
                                        (*ops->callback)(__VA_ARGS__));       \
                }                                                             \
        } while (0)

/*
 * Called iff UTRACE_EVENT(EXEC) flag is set.
 */
void utrace_report_exec(struct linux_binfmt *fmt, struct linux_binprm *bprm,
                        struct pt_regs *regs)
{
        struct task_struct *task = current;
        struct utrace *utrace = task_utrace_struct(task);
        INIT_REPORT(report);

        REPORT(task, utrace, &report, UTRACE_EVENT(EXEC),
               report_exec, fmt, bprm, regs);
}

/*
 * Called iff UTRACE_EVENT(SYSCALL_ENTRY) flag is set.
 * Return true to prevent the system call.
 */
bool utrace_report_syscall_entry(struct pt_regs *regs)
{
        struct task_struct *task = current;
        struct utrace *utrace = task_utrace_struct(task);
        INIT_REPORT(report);

        start_report(utrace);
        REPORT_CALLBACKS(task, utrace, &report, UTRACE_EVENT(SYSCALL_ENTRY),
                         report_syscall_entry, report.result | report.action,
                         engine, current, regs);
        finish_report(&report, task, utrace);

        if (report.action == UTRACE_STOP &&
            unlikely(utrace_stop(task, utrace, false)))
                /*
                 * We are continuing despite UTRACE_STOP because of a
                 * SIGKILL.  Don't let the system call actually proceed.
                 */
                return true;

        if (unlikely(report.result == UTRACE_SYSCALL_ABORT))
                return true;

        if (signal_pending(task)) {
                /*
                 * Clear TIF_SIGPENDING if it no longer needs to be set.
                 * It may have been set as part of quiescence, and won't
                 * ever have been cleared by another thread.  For other
                 * reports, we can just leave it set and will go through
                 * utrace_get_signal() to reset things.  But here we are
                 * about to enter a syscall, which might bail out with an
                 * -ERESTART* error if it's set now.
                 */
                spin_lock_irq(&task->sighand->siglock);
                recalc_sigpending();
                spin_unlock_irq(&task->sighand->siglock);
        }

        return false;
}

/*
 * Called iff UTRACE_EVENT(SYSCALL_EXIT) flag is set.
 */
void utrace_report_syscall_exit(struct pt_regs *regs)
{
        struct task_struct *task = current;
        struct utrace *utrace = task_utrace_struct(task);
        INIT_REPORT(report);

        REPORT(task, utrace, &report, UTRACE_EVENT(SYSCALL_EXIT),
               report_syscall_exit, regs);
}

/*
 * Called iff UTRACE_EVENT(CLONE) flag is set.
 * This notification call blocks the wake_up_new_task call on the child.
 * So we must not quiesce here.  tracehook_report_clone_complete will do
 * a quiescence check momentarily.
 */
void utrace_report_clone(unsigned long clone_flags, struct task_struct *child)
{
        struct task_struct *task = current;
        struct utrace *utrace = task_utrace_struct(task);
        INIT_REPORT(report);

        /*
         * We don't use the REPORT() macro here, because we need
         * to clear utrace->cloning before finish_report().
         * After finish_report(), utrace can be a stale pointer
         * in cases when report.action is still UTRACE_RESUME.
         */
        start_report(utrace);
        utrace->cloning = child;

        REPORT_CALLBACKS(task, utrace, &report,
                         UTRACE_EVENT(CLONE), report_clone,
                         report.action, engine, task, clone_flags, child);

        utrace->cloning = NULL;
        finish_report(&report, task, utrace);

        /*
         * For a vfork, we will go into an uninterruptible block waiting
         * for the child.  We need UTRACE_STOP to happen before this, not
         * after.  For CLONE_VFORK, utrace_finish_vfork() will be called.
         */
        if (report.action == UTRACE_STOP && (clone_flags & CLONE_VFORK)) {
                spin_lock(&utrace->lock);
                utrace->vfork_stop = 1;
                spin_unlock(&utrace->lock);
        }
}

/*
 * We're called after utrace_report_clone() for a CLONE_VFORK.
 * If UTRACE_STOP was left from the clone report, we stop here.
 * After this, we'll enter the uninterruptible wait_for_completion()
 * waiting for the child.
 */
void utrace_finish_vfork(struct task_struct *task)
{
        struct utrace *utrace = task_utrace_struct(task);

        spin_lock(&utrace->lock);
        if (!utrace->vfork_stop)
                spin_unlock(&utrace->lock);
        else {
                utrace->vfork_stop = 0;
                spin_unlock(&utrace->lock);
                utrace_stop(task, utrace, false);
        }
}

/*
 * Called iff UTRACE_EVENT(JCTL) flag is set.
 *
 * Called with siglock held.
 */
void utrace_report_jctl(int notify, int what)
{
        struct task_struct *task = current;
        struct utrace *utrace = task_utrace_struct(task);
        INIT_REPORT(report);
        bool stop = task_is_stopped(task);

        /*
         * We have to come out of TASK_STOPPED in case the event report
         * hooks might block.  Since we held the siglock throughout, it's
         * as if we were never in TASK_STOPPED yet at all.
         */
        if (stop) {
                __set_current_state(TASK_RUNNING);
                task->signal->flags &= ~SIGNAL_STOP_STOPPED;
                ++task->signal->group_stop_count;
        }
        spin_unlock_irq(&task->sighand->siglock);

        /*
         * We get here with CLD_STOPPED when we've just entered
         * TASK_STOPPED, or with CLD_CONTINUED when we've just come
         * out but not yet been through utrace_get_signal() again.
         *
         * While in TASK_STOPPED, we can be considered safely
         * stopped by utrace_do_stop() and detached asynchronously.
         * If we woke up and checked task->utrace_flags before that
         * was finished, we might be here with utrace already
         * removed or in the middle of being removed.
         *
         * If we are indeed attached, then make sure we are no
         * longer considered stopped while we run callbacks.
         */
        spin_lock(&utrace->lock);
        utrace->stopped = 0;
        /*
         * Do start_report()'s work too since we already have the lock anyway.
         */
        utrace->report = 0;
        splice_attaching(utrace);
        spin_unlock(&utrace->lock);

        REPORT(task, utrace, &report, UTRACE_EVENT(JCTL),
               report_jctl, what, notify);

        /*
         * Retake the lock, and go back into TASK_STOPPED
         * unless the stop was just cleared.
         */
        spin_lock_irq(&task->sighand->siglock);
        if (stop && task->signal->group_stop_count > 0) {
                __set_current_state(TASK_STOPPED);
                if (--task->signal->group_stop_count == 0)
                        task->signal->flags |= SIGNAL_STOP_STOPPED;
        }
}

/*
 * Called iff UTRACE_EVENT(EXIT) flag is set.
 */
void utrace_report_exit(long *exit_code)
{
        struct task_struct *task = current;
        struct utrace *utrace = task_utrace_struct(task);
        INIT_REPORT(report);
        long orig_code = *exit_code;

        REPORT(task, utrace, &report, UTRACE_EVENT(EXIT),
               report_exit, orig_code, exit_code);

        if (report.action == UTRACE_STOP)
                utrace_stop(task, utrace, false);
}

/*
 * Called iff UTRACE_EVENT(DEATH) or UTRACE_EVENT(QUIESCE) flag is set.
 *
 * It is always possible that we are racing with utrace_release_task here.
 * For this reason, utrace_release_task checks for the event bits that get
 * us here, and delays its cleanup for us to do.
 */
void utrace_report_death(struct task_struct *task, struct utrace *utrace,
                         bool group_dead, int signal)
{
        INIT_REPORT(report);

        BUG_ON(!task->exit_state);

        /*
         * We are presently considered "quiescent"--which is accurate
         * inasmuch as we won't run any more user instructions ever again.
         * But for utrace_control and utrace_set_events to be robust, they
         * must be sure whether or not we will run any more callbacks.  If
         * a call comes in before we do, taking the lock here synchronizes
         * us so we don't run any callbacks just disabled.  Calls that come
         * in while we're running the callbacks will see the exit.death
         * flag and know that we are not yet fully quiescent for purposes
         * of detach bookkeeping.
         */
        spin_lock(&utrace->lock);
        BUG_ON(utrace->death);
        utrace->death = 1;
        utrace->report = 0;
        utrace->interrupt = 0;
        spin_unlock(&utrace->lock);

        REPORT_CALLBACKS(task, utrace, &report, UTRACE_EVENT(DEATH),
                         report_death, engine, task, group_dead, signal);

        spin_lock(&utrace->lock);

        /*
         * After we unlock (possibly inside utrace_reap for callbacks) with
         * this flag clear, competing utrace_control/utrace_set_events calls
         * know that we've finished our callbacks and any detach bookkeeping.
         */
        utrace->death = 0;

        if (utrace->reap)
                /*
                 * utrace_release_task() was already called in parallel.
                 * We must complete its work now.
                 */
                utrace_reap(task, utrace);
        else
                utrace_reset(task, utrace, &report.action);
}

/*
 * Finish the last reporting pass before returning to user mode.
 */
static void finish_resume_report(struct utrace_report *report,
                                 struct task_struct *task,
                                 struct utrace *utrace)
{
        if (report->detaches || !report->takers) {
                spin_lock(&utrace->lock);
                utrace_reset(task, utrace, &report->action);
        }

        switch (report->action) {
        case UTRACE_STOP:
                report->killed = utrace_stop(task, utrace, report->reports);
                break;

        case UTRACE_INTERRUPT:
                if (!signal_pending(task))
                        set_tsk_thread_flag(task, TIF_SIGPENDING);
                break;

        case UTRACE_SINGLESTEP:
                user_enable_single_step(task);
                break;

        case UTRACE_BLOCKSTEP:
                user_enable_block_step(task);
                break;

        case UTRACE_REPORT:
        case UTRACE_RESUME:
        default:
                user_disable_single_step(task);
                break;
        }
}

/*
 * This is called when TIF_NOTIFY_RESUME had been set (and is now clear).
 * We are close to user mode, and this is the place to report or stop.
 * When we return, we're going to user mode or into the signals code.
 */
void utrace_resume(struct task_struct *task, struct pt_regs *regs)
{
        struct utrace *utrace = task_utrace_struct(task);
        INIT_REPORT(report);
        struct utrace_engine *engine;

        /*
         * Some machines get here with interrupts disabled.  The same arch
         * code path leads to calling into get_signal_to_deliver(), which
         * implicitly reenables them by virtue of spin_unlock_irq.
         */
        local_irq_enable();

        /*
         * If this flag is still set it's because there was a signal
         * handler setup done but no report_signal following it.  Clear
         * the flag before we get to user so it doesn't confuse us later.
         */
        if (unlikely(utrace->signal_handler)) {
                int skip;
                spin_lock(&utrace->lock);
                utrace->signal_handler = 0;
                skip = !utrace->report;
                spin_unlock(&utrace->lock);
                if (skip)
                        return;
        }

        /*
         * If UTRACE_INTERRUPT was just used, we don't bother with a
         * report here.  We will report and stop in utrace_get_signal().
         */
        if (unlikely(utrace->interrupt))
                return;

        /*
         * Do a simple reporting pass, with no callback after report_quiesce.
         */
        start_report(utrace);

        list_for_each_entry(engine, &utrace->attached, entry)
                start_callback(utrace, &report, engine, task, 0);

        /*
         * Finish the report and either stop or get ready to resume.
         */
        finish_resume_report(&report, task, utrace);
}

/*
 * Return true if current has forced signal_pending().
 *
 * This is called only when current->utrace_flags is nonzero, so we know
 * that current->utrace must be set.  It's not inlined in tracehook.h
 * just so that struct utrace can stay opaque outside this file.
 */
bool utrace_interrupt_pending(void)
{
        return task_utrace_struct(current)->interrupt;
}

/*
 * Take the siglock and push @info back on our queue.
 * Returns with @task->sighand->siglock held.
 */
static void push_back_signal(struct task_struct *task, siginfo_t *info)
        __acquires(task->sighand->siglock)
{
        struct sigqueue *q;

        if (unlikely(!info->si_signo)) { /* Oh, a wise guy! */
                spin_lock_irq(&task->sighand->siglock);
                return;
        }

        q = sigqueue_alloc();
        if (likely(q)) {
                q->flags = 0;
                copy_siginfo(&q->info, info);
        }

        spin_lock_irq(&task->sighand->siglock);

        sigaddset(&task->pending.signal, info->si_signo);
        if (likely(q))
                list_add(&q->list, &task->pending.list);

        set_tsk_thread_flag(task, TIF_SIGPENDING);
}

/*
 * This is the hook from the signals code, called with the siglock held.
 * Here is the ideal place to stop.  We also dequeue and intercept signals.
 */
int utrace_get_signal(struct task_struct *task, struct pt_regs *regs,
                      siginfo_t *info, struct k_sigaction *return_ka)
        __releases(task->sighand->siglock)
        __acquires(task->sighand->siglock)
{
        struct utrace *utrace;
        struct k_sigaction *ka;
        INIT_REPORT(report);
        struct utrace_engine *engine;
        const struct utrace_engine_ops *ops;
        unsigned long event, want;
        u32 ret;
        int signr;

        utrace = &task->utrace;
        if (utrace->interrupt || utrace->report || utrace->signal_handler) {
                /*
                 * We've been asked for an explicit report before we
                 * even check for pending signals.
                 */

                spin_unlock_irq(&task->sighand->siglock);

                spin_lock(&utrace->lock);

                splice_attaching(utrace);

                if (unlikely(!utrace->interrupt) && unlikely(!utrace->report))
                        report.result = UTRACE_SIGNAL_IGN;
                else if (utrace->signal_handler)
                        report.result = UTRACE_SIGNAL_HANDLER;
                else
                        report.result = UTRACE_SIGNAL_REPORT;

                /*
                 * We are now making the report and it's on the
                 * interrupt path, so clear the flags asking for those.
                 */
                utrace->interrupt = utrace->report = utrace->signal_handler = 0;
                utrace->stopped = 0;

                /*
                 * Make sure signal_pending() only returns true
                 * if there are real signals pending.
                 */
                if (signal_pending(task)) {
                        spin_lock_irq(&task->sighand->siglock);
                        recalc_sigpending();
                        spin_unlock_irq(&task->sighand->siglock);
                }

                spin_unlock(&utrace->lock);

                if (unlikely(report.result == UTRACE_SIGNAL_IGN))
                        /*
                         * We only got here to clear utrace->signal_handler.
                         */
                        return -1;

                /*
                 * Do a reporting pass for no signal, just for EVENT(QUIESCE).
                 * The engine callbacks can fill in *info and *return_ka.
                 * We'll pass NULL for the @orig_ka argument to indicate
                 * that there was no original signal.
                 */
                event = 0;
                ka = NULL;
                memset(return_ka, 0, sizeof *return_ka);
        } else if ((task->utrace_flags & UTRACE_EVENT_SIGNAL_ALL) == 0 &&
                   !utrace->stopped) {
                /*
                 * If no engine is interested in intercepting signals,
                 * let the caller just dequeue them normally.
                 */
                return 0;
        } else {
                if (unlikely(utrace->stopped)) {
                        spin_unlock_irq(&task->sighand->siglock);
                        spin_lock(&utrace->lock);
                        utrace->stopped = 0;
                        spin_unlock(&utrace->lock);
                        spin_lock_irq(&task->sighand->siglock);
                }

                /*
                 * Steal the next signal so we can let tracing engines
                 * examine it.  From the signal number and sigaction,
                 * determine what normal delivery would do.  If no
                 * engine perturbs it, we'll do that by returning the
                 * signal number after setting *return_ka.
                 */
                signr = dequeue_signal(task, &task->blocked, info);
                if (signr == 0)
                        return signr;
                BUG_ON(signr != info->si_signo);

                ka = &task->sighand->action[signr - 1];
                *return_ka = *ka;

                /*
                 * We are never allowed to interfere with SIGKILL.
                 * Just punt after filling in *return_ka for our caller.
                 */
                if (signr == SIGKILL)
                        return signr;

                if (ka->sa.sa_handler == SIG_IGN) {
                        event = UTRACE_EVENT(SIGNAL_IGN);
                        report.result = UTRACE_SIGNAL_IGN;
                } else if (ka->sa.sa_handler != SIG_DFL) {
                        event = UTRACE_EVENT(SIGNAL);
                        report.result = UTRACE_SIGNAL_DELIVER;
                } else if (sig_kernel_coredump(signr)) {
                        event = UTRACE_EVENT(SIGNAL_CORE);
                        report.result = UTRACE_SIGNAL_CORE;
                } else if (sig_kernel_ignore(signr)) {
                        event = UTRACE_EVENT(SIGNAL_IGN);
                        report.result = UTRACE_SIGNAL_IGN;
                } else if (signr == SIGSTOP) {
                        event = UTRACE_EVENT(SIGNAL_STOP);
                        report.result = UTRACE_SIGNAL_STOP;
                } else if (sig_kernel_stop(signr)) {
                        event = UTRACE_EVENT(SIGNAL_STOP);
                        report.result = UTRACE_SIGNAL_TSTP;
                } else {
                        event = UTRACE_EVENT(SIGNAL_TERM);
                        report.result = UTRACE_SIGNAL_TERM;
                }

                /*
                 * Now that we know what event type this signal is, we
                 * can short-circuit if no engines care about those.
                 */
                if ((task->utrace_flags & (event | UTRACE_EVENT(QUIESCE))) == 0)
                        return signr;

                /*
                 * We have some interested engines, so tell them about
                 * the signal and let them change its disposition.
                 */
                spin_unlock_irq(&task->sighand->siglock);
        }

        /*
         * This reporting pass chooses what signal disposition we'll act on.
         */
        list_for_each_entry(engine, &utrace->attached, entry) {
                /*
                 * See start_callback() comment about this barrier.
                 */
                utrace->reporting = engine;
                smp_mb();

                /*
                 * This pairs with the barrier in mark_engine_detached(),
                 * see start_callback() comments.
                 */
                want = engine->flags;
                smp_rmb();
                ops = engine->ops;

                if ((want & (event | UTRACE_EVENT(QUIESCE))) == 0) {
                        utrace->reporting = NULL;
                        continue;
                }

                if (ops->report_signal)
                        ret = (*ops->report_signal)(
                                report.result | report.action, engine, task,
                                regs, info, ka, return_ka);
                else
                        ret = (report.result | (*ops->report_quiesce)(
                                       report.action, engine, task, event));

                /*
                 * Avoid a tight loop reporting again and again if some
                 * engine is too stupid.
                 */
                switch (utrace_resume_action(ret)) {
                default:
                        break;
                case UTRACE_INTERRUPT:
                case UTRACE_REPORT:
                        ret = (ret & ~UTRACE_RESUME_MASK) | UTRACE_RESUME;
                        break;
                }

                finish_callback(utrace, &report, engine, ret);
        }

        /*
         * We express the chosen action to the signals code in terms
         * of a representative signal whose default action does it.
         * Our caller uses our return value (signr) to decide what to
         * do, but uses info->si_signo as the signal number to report.
         */
        switch (utrace_signal_action(report.result)) {
        case UTRACE_SIGNAL_TERM:
                signr = SIGTERM;
                break;

        case UTRACE_SIGNAL_CORE:
                signr = SIGQUIT;
                break;

        case UTRACE_SIGNAL_STOP:
                signr = SIGSTOP;
                break;

        case UTRACE_SIGNAL_TSTP:
                signr = SIGTSTP;
                break;

        case UTRACE_SIGNAL_DELIVER:
                signr = info->si_signo;

                if (return_ka->sa.sa_handler == SIG_DFL) {
                        /*
                         * We'll do signr's normal default action.
                         * For ignore, we'll fall through below.
                         * For stop/death, break locks and returns it.
                         */
                        if (likely(signr) && !sig_kernel_ignore(signr))
                                break;
                } else if (return_ka->sa.sa_handler != SIG_IGN &&
                           likely(signr)) {
                        /*
                         * Complete the bookkeeping after the report.
                         * The handler will run.  If an engine wanted to
                         * stop or step, then make sure we do another
                         * report after signal handler setup.
                         */
                        if (report.action != UTRACE_RESUME)
                                report.action = UTRACE_INTERRUPT;
                        finish_report(&report, task, utrace);

                        if (unlikely(report.result & UTRACE_SIGNAL_HOLD))
                                push_back_signal(task, info);
                        else
                                spin_lock_irq(&task->sighand->siglock);

                        /*
                         * We do the SA_ONESHOT work here since the
                         * normal path will only touch *return_ka now.
                         */
                        if (unlikely(return_ka->sa.sa_flags & SA_ONESHOT)) {
                                return_ka->sa.sa_flags &= ~SA_ONESHOT;
                                if (likely(valid_signal(signr))) {
                                        ka = &task->sighand->action[signr - 1];
                                        ka->sa.sa_handler = SIG_DFL;
                                }
                        }

                        return signr;
                }

                /* Fall through for an ignored signal.  */

        case UTRACE_SIGNAL_IGN:
        case UTRACE_SIGNAL_REPORT:
        default:
                /*
                 * If the signal is being ignored, then we are on the way
                 * directly back to user mode.  We can stop here, or step,
                 * as in utrace_resume(), above.  After we've dealt with that,
                 * our caller will relock and come back through here.
                 */
                finish_resume_report(&report, task, utrace);

                if (unlikely(report.killed)) {
                        /*
                         * The only reason we woke up now was because of a
                         * SIGKILL.  Don't do normal dequeuing in case it
                         * might get a signal other than SIGKILL.  That would
                         * perturb the death state so it might differ from
                         * what the debugger would have allowed to happen.
                         * Instead, pluck out just the SIGKILL to be sure
                         * we'll die immediately with nothing else different
                         * from the quiescent state the debugger wanted us in.
                         */
                        sigset_t sigkill_only;
                        siginitsetinv(&sigkill_only, sigmask(SIGKILL));
                        spin_lock_irq(&task->sighand->siglock);
                        signr = dequeue_signal(task, &sigkill_only, info);
                        BUG_ON(signr != SIGKILL);
                        *return_ka = task->sighand->action[SIGKILL - 1];
                        return signr;
                }

                if (unlikely(report.result & UTRACE_SIGNAL_HOLD)) {
                        push_back_signal(task, info);
                        spin_unlock_irq(&task->sighand->siglock);
                }

                return -1;
        }

        /*
         * Complete the bookkeeping after the report.
         * This sets utrace->report if UTRACE_STOP was used.
         */
        finish_report(&report, task, utrace);

        return_ka->sa.sa_handler = SIG_DFL;

        if (unlikely(report.result & UTRACE_SIGNAL_HOLD))
                push_back_signal(task, info);
        else
                spin_lock_irq(&task->sighand->siglock);

        if (sig_kernel_stop(signr))
                task->signal->flags |= SIGNAL_STOP_DEQUEUED;

        return signr;
}

/*
 * This gets called after a signal handler has been set up.
 * We set a flag so the next report knows it happened.
 * If we're already stepping, make sure we do a report_signal.
 * If not, make sure we get into utrace_resume() where we can
 * clear the signal_handler flag before resuming.
 */
void utrace_signal_handler(struct task_struct *task, int stepping)
{
        struct utrace *utrace = task_utrace_struct(task);

        spin_lock(&utrace->lock);

        utrace->signal_handler = 1;
        if (stepping) {
                utrace->interrupt = 1;
                set_tsk_thread_flag(task, TIF_SIGPENDING);
        } else {
                set_tsk_thread_flag(task, TIF_NOTIFY_RESUME);
        }

        spin_unlock(&utrace->lock);
}

/**
 * utrace_prepare_examine - prepare to examine thread state
 * @target:             thread of interest, a &struct task_struct pointer
 * @engine:             engine pointer returned by utrace_attach_task()
 * @exam:               temporary state, a &struct utrace_examiner pointer
 *
 * This call prepares to safely examine the thread @target using
 * &struct user_regset calls, or direct access to thread-synchronous fields.
 *
 * When @target is current, this call is superfluous.  When @target is
 * another thread, it must held stopped via %UTRACE_STOP by @engine.
 *
 * This call may block the caller until @target stays stopped, so it must
 * be called only after the caller is sure @target is about to unschedule.
 * This means a zero return from a utrace_control() call on @engine giving
 * %UTRACE_STOP, or a report_quiesce() or report_signal() callback to
 * @engine that used %UTRACE_STOP in its return value.
 *
 * Returns -%ESRCH if @target is dead or -%EINVAL if %UTRACE_STOP was
 * not used.  If @target has started running again despite %UTRACE_STOP
 * (for %SIGKILL or a spurious wakeup), this call returns -%EAGAIN.
 *
 * When this call returns zero, it's safe to use &struct user_regset
 * calls and task_user_regset_view() on @target and to examine some of
 * its fields directly.  When the examination is complete, a
 * utrace_finish_examine() call must follow to check whether it was
 * completed safely.
 */
int utrace_prepare_examine(struct task_struct *target,
                           struct utrace_engine *engine,
                           struct utrace_examiner *exam)
{
        int ret = 0;

        if (unlikely(target == current))
                return 0;

        rcu_read_lock();
        if (unlikely(!engine_wants_stop(engine)))
                ret = -EINVAL;
        else if (unlikely(target->exit_state))
                ret = -ESRCH;
        else {
                exam->state = target->state;
                if (unlikely(exam->state == TASK_RUNNING))
                        ret = -EAGAIN;
                else
                        get_task_struct(target);
        }
        rcu_read_unlock();

        if (likely(!ret)) {
                exam->ncsw = wait_task_inactive(target, exam->state);
                put_task_struct(target);
                if (unlikely(!exam->ncsw))
                        ret = -EAGAIN;
        }

        return ret;
}
EXPORT_SYMBOL_GPL(utrace_prepare_examine);

/**
 * utrace_finish_examine - complete an examination of thread state
 * @target:             thread of interest, a &struct task_struct pointer
 * @engine:             engine pointer returned by utrace_attach_task()
 * @exam:               pointer passed to utrace_prepare_examine() call
 *
 * This call completes an examination on the thread @target begun by a
 * paired utrace_prepare_examine() call with the same arguments that
 * returned success (zero).
 *
 * When @target is current, this call is superfluous.  When @target is
 * another thread, this returns zero if @target has remained unscheduled
 * since the paired utrace_prepare_examine() call returned zero.
 *
 * When this returns an error, any examination done since the paired
 * utrace_prepare_examine() call is unreliable and the data extracted
 * should be discarded.  The error is -%EINVAL if @engine is not
 * keeping @target stopped, or -%EAGAIN if @target woke up unexpectedly.
 */
int utrace_finish_examine(struct task_struct *target,
                          struct utrace_engine *engine,
                          struct utrace_examiner *exam)
{
        int ret = 0;

        if (unlikely(target == current))
                return 0;

        rcu_read_lock();
        if (unlikely(!engine_wants_stop(engine)))
                ret = -EINVAL;
        else if (unlikely(target->state != exam->state))
                ret = -EAGAIN;
        else
                get_task_struct(target);
        rcu_read_unlock();

        if (likely(!ret)) {
                unsigned long ncsw = wait_task_inactive(target, exam->state);
                if (unlikely(ncsw != exam->ncsw))
                        ret = -EAGAIN;
                put_task_struct(target);
        }

        return ret;
}
EXPORT_SYMBOL_GPL(utrace_finish_examine);

/*
 * This is declared in linux/regset.h and defined in machine-dependent
 * code.  We put the export here to ensure no machine forgets it.
 */
EXPORT_SYMBOL_GPL(task_user_regset_view);

/*
 * Called with rcu_read_lock() held.
 */
void task_utrace_proc_status(struct seq_file *m, struct task_struct *p)
{
        struct utrace *utrace = &p->utrace;
        seq_printf(m, "Utrace: %lx%s%s%s\n",
                   p->utrace_flags,
                   utrace->stopped ? " (stopped)" : "",
                   utrace->report ? " (report)" : "",
                   utrace->interrupt ? " (interrupt)" : "");
}