| blob | 19b59ec0ea933e8a9e32b5c9cab127dad866664f |
1 #
2 # ***** BEGIN LICENSE BLOCK *****
3 # Version: MPL 1.1/GPL 2.0/LGPL 2.1
4 #
5 # The contents of this file are subject to the Mozilla Public License Version
6 # 1.1 (the "License"); you may not use this file except in compliance with
7 # the License. You may obtain a copy of the License at
8 # http://www.mozilla.org/MPL/
9 #
10 # Software distributed under the License is distributed on an "AS IS" basis,
11 # WITHOUT WARRANTY OF ANY KIND, either express or implied. See the License
12 # for the specific language governing rights and limitations under the
13 # License.
14 #
15 # The Original Code is The JavaScript Debugger.
16 #
17 # The Initial Developer of the Original Code is
18 # Netscape Communications Corporation.
19 # Portions created by the Initial Developer are Copyright (C) 1998
20 # the Initial Developer. All Rights Reserved.
21 #
22 # Contributor(s):
23 # Robert Ginda, <rginda@netscape.com>, original author
24 #
25 # Alternatively, the contents of this file may be used under the terms of
26 # either the GNU General Public License Version 2 or later (the "GPL"), or
27 # the GNU Lesser General Public License Version 2.1 or later (the "LGPL"),
28 # in which case the provisions of the GPL or the LGPL are applicable instead
29 # of those above. If you wish to allow use of your version of this file only
30 # under the terms of either the GPL or the LGPL, and not to allow others to
31 # use your version of this file under the terms of the MPL, indicate your
32 # decision by deleting the provisions above and replace them with the notice
33 # and other provisions required by the GPL or the LGPL. If you do not delete
34 # the provisions above, a recipient may use your version of this file under
35 # the terms of any one of the MPL, the GPL or the LGPL.
36 #
37 # ***** END LICENSE BLOCK *****
39 # NOTE ON LEADING/TRAILING SPACES AND QUOTES…
40 # Strings in this file are stripped of leading and trailing quotes, if they are
41 # present. This allows you to express leading and trailing whitespace, which
42 # would otherwise be trimmed by the stringbundle code. In order to express
43 # a leading or trailing quote, use two of them.
44 #
45 # For example…
46 #
47 # my.message1 = " foo"
48 # my.message2 = " foo
49 # Both of these produce 10 spaces, followed by the word ``foo''.
50 # my.message3 = "foo "
51 # my.message3 = foo "
52 # Both of these produce the word ``foo'', followed by 10 spaces.
53 # my.message4 = A sphincter says, "what?""
54 # my.message4 = "A sphincter says, "what?""
55 # Both of these produce the phrase ``A sphincter says "what?"''
56 #
58 # character set to convert unicode messages to before writing them to a
59 # profile report, or generated help text.
60 msg.report.charset = utf-8
61 msg.locale.version = 0.9.87.2
62 msn.bad.locale = This version of Venkman is meant to work with a ``%1$S'' locale, but you are currently using a locale marked ``%2$S''. Chances are, you're going to have problems. Please change to the default locale, or upgrade your language pack.
64 msg.release.url = http://www.mozilla.org/releases/
66 ## exception descriptions ##
67 err.notimplemented = Not implemented
68 err.required.param = Missing required parameter %1$S
69 err.invalid.param = Invalid value for parameter %1$S (%2$S)
70 # 1 url, 2 fileName, 3 lineNumber, 4 reason
71 err.subscript.load = Error loading subscript from <%1$S>.
72 err.no.debugger = JS Debugger Service is not installed. (Perhaps this application was built [see about:buildconfig] with --disable-jsd, which suppresses building core support required for Venkman. You can resolve this by recompiling without that option or complaining to your vendor [who shouldn't be using that flag].)
73 err.failure = Operation Failed: %1$S
74 err.no.stack = No Stack
76 ## error messages ##
77 msn.err.unknown.reason = Unknown reason
78 msn.err.required.param = Missing required parameter %1$S
79 msn.err.invalid.param = Invalid value for parameter %1$S (%2$S)
80 msn.err.invalid.pref = Invalid value for preference %1$S (%2$S)
81 msn.err.scriptload = Error loading subscript from <%1$S>.
82 msn.err.no.source = No scripts loaded match ``%1$S''.
83 msn.err.no.command = No command named ``%1$S''.
84 msn.err.no.such.view = No such view ``%1$S''.
85 msg.err.no.stack = No stack
86 msg.err.no.eval.object = No object selected for evaluations
87 msn.err.noscript = No debuggable scripts found for ``%1$S''
88 msn.err.disabled = Sorry, ``%1$S'' is currently disabled
89 msn.err.notimplemented = Sorry, ``%1$S'' has not been implemented
90 msn.err.ambigcommand = Ambiguous command, ``%1$S'', %2$S commands match [%3$S]
91 msn.err.bp.noline = No scripts matching <%1$S> contain executable code at line %2$S
92 msn.err.bp.nodice = No breakpoint set at <%1$S> line %2$S
93 msn.err.startup = An exception occurred while initializing, please file a bug.\n%1$S
94 msn.err.cant.match = Error loading template: Can't match ``%1$S''.
95 msg.err.internal.bpt = Internal error handling breakpoint.
96 msn.err.internal.hook = Internal error processing hook ``%1$S''.
97 msn.err.failure = Operation Failed: %1$S
98 msn.err.no.section = Missing section before ``%1$S'' in <%2$S>.
99 msn.err.no.template = No pref for template named ``%1$S''.
100 msn.err.not.a.dom.node = Expression ``%1$S'' is not a DOM Node.
101 msn.err.internal.dispatch = Internal error dispatching command ``%1$S''.
102 msn.err.source.load.failed = Error loading URL <%1$S>: %2$S.
103 msn.err.no.such.container = No such container ``%1$S''.
104 msg.err.condition.failed = Error evaluating breakpoint condition.
105 msg.err.format.not.available = Source not available in requested format.
106 msn.err.no.function = Line %1$S in <%2$S> is not part of an executable function.
107 msn.jsdurl.errpage = <html><head><title>Error</title></head><body>Error loading <<b>%1$S</b>><br>%2$S</body></html>
108 msg.err.jsdurl.parse = Error parsing URL.
109 msg.err.jsdurl.nosource = URL has no textual source.
110 msg.err.jsdurl.noservice = No such service.
111 msg.err.jsdurl.search = Error in search pattern.
112 msg.err.jsdurl.sourcetext = Error locating source text.
113 msn.err.jsdurl.template = Error loading template named ``%1$S''.
114 msn.err.meta.failed = Error processing meta comment ``%1$S'' in <%2$S>, line %3$S.
115 msg.err.this.not.object = Result of expression must be an object.
116 msn.err.unknown.pref = Unknown pref name ``%1$S''.
118 ## "values" ##
119 msg.val.unknown = <unknown>
120 msg.val.console = x-jsd:interactive-session
121 msg.val.na = <not-available>
122 msg.val.none = <none>
123 msg.val.object = <object>
124 msg.val.expression = <expression>
125 msg.val.proto = [[Prototype]]
126 msg.val.parent = [[Parent]]
128 ## words ##
129 msg.val.min = min
130 msg.val.max = max
131 msg.val.this = this
132 msg.val.breakpoint = breakpoint
133 msg.val.debug = error handler
134 msg.val.debugger = debugger keyword
135 msg.val.throw = thrown exception
136 msg.val.global = global
137 msg.val.scope = scope
138 msg.val.exception = exception
139 msg.val.on = on
140 msg.val.off = off
141 msg.val.tlscript = __toplevel__
142 msg.val.toscript = [TimeoutScript]
143 msg.val.ivscript = [IntervalScript]
144 msg.val.evscript = [EvalScript]
145 msg.url.native = x-jsd:native-code
147 ## types ##
148 msg.type.int = integer
149 msg.type.boolean = boolean
150 msg.type.double = double
151 msg.type.function = function
152 msg.type.null = null
153 msg.type.object = object
154 msg.type.string = string
155 msg.type.unknown = unknown
156 msg.type.void = void
158 msg.class.xpcobj = XPComponent
159 msg.class.const.xpcobj = const XPComponent
160 msg.class.native.fun = Native Function
161 msg.class.script.fun = Script Function
163 ## messages ##
164 msg.query.close = Debugging in progress, close anyway?
165 msg.status.default = Welcome to the JavaScript Debugger
166 msn.status.loading = Loading source for ``%1$S''
167 msn.status.marking = Marking source for ``%1$S''
168 msn.status.stopped = Stopped in %1$S, %2$S
169 msn.floater.title = JSD: %1$S
171 msg.alert = Alert
172 msg.prompt = Prompt
173 msg.confirm = Confirm
175 msg.cant.pprint = Unable to Pretty Print this function.
177 msg.slash.required = THINGS HAVE CHANGED: By default, all commands now start with a forward-slash ('/') character. Any text that DOES NOT start with a forward-slash will be passed to the ``eval'' command. For example, to execute the ``step'' command, type ``/step''. To evaluate ``1 + 1'', you just need to type ``1 + 1''. If you prefer the previous behavior, type ``/pref sessionView.requireSlash false''.
179 msg.commasp = , "
180 msn.eval.in = %1$S: %2$S"
181 msn.stop = Stopped for %1$S.
182 msn.cont = Continuing from %1$S.
183 msn.subscript.loaded = Subscript <%1$S> loaded with result ``%2$S''.
184 # 1 exception name, 2 fileName, 3 lineNumber
185 msn.eval.error = %1$S: <%2$S>, line %3$S
186 msn.eval.threw = Caught exception: ``%1$S''
187 msg.hello = Welcome to ``Venkman'', the JavaScript debugger. Please read the FAQ at <http://www.hacksrus.com/~ginda/venkman/faq/venkman-faq.html>. Visit the Venkman homepage <http://www.mozilla.org/projects/venkman/> for more information.
188 msn.version = You are running Venkman version %1$S.
189 msn.tip1.help = Use ``%1$Shelp <command-name>'' for help on specific commands.
190 msg.tip2.help = Visit <x-jsd:help> for a searchable command reference.
191 msg.tip3.help = Commands start with a forward-slash ('/') character. Any text that DOES NOT start with a forward-slash will be evaluated as JavaScript. For example, to execute the ``step'' command, type ``/step''. To evaluate ``1 + 1'', just type ``1 + 1''.
192 msg.no.breaks.set = No breakpoints set.
193 msg.no.fbreaks.set = No future breakpoints set.
194 msg.no.watches.set = No watches set.
195 msn.no.properties = %1$S has no properties.
196 msn.no.cmdmatch = No commands match ``%1$S''.
197 msn.cmdmatch = Commands matching ``%1$S'' are [%2$S].
198 msn.cmdmatch.all = Implemented commands are %1$S.
199 msn.props.header = Properties of %1$S in debug target scope:
200 msn.propsd.header = Properties of %1$S in debugger scope:
201 msn.bp.header = %1$S breakpoints set:
202 # 1 index, 2 file name, 3 line
203 msn.bp.line = #%1$S <%2$S> line %3$S
204 msn.bp.created = Breakpoint at <%1$S> line %2$S created
205 msn.bp.cleared = Breakpoint at <%1$S> line %2$S deleted
206 msn.bp.exists = Breakpoint at <%1$S> line %2$S already set.
207 msn.watch.header = %1$S watches set:
208 msn.enter.expression = Enter expression for new value of \u201c%1$S\u201d:
210 # 1 index, 2 file name, 3 line
211 msn.fbp.line = #%1$S <%2$S> line %3$S
212 msn.fbp.created = Future breakpoint at <%1$S> line %2$S created.
213 msn.fbp.cleared = Future breakpoint at <%1$S> line %2$S cleared.
214 msn.fbp.exists = Future breakpoint at <%1$S> line %2$S already set.
215 msn.source.line = %1$S: %2$S"
216 msg.emode.ignore = Errors will now be ignored.
217 msg.emode.trace = Errors will now be traced.
218 msg.emode.break = Errors will now stop the debug target.
219 msg.tmode.ignore = Exceptions will now be ignored.
220 msg.tmode.trace = Exceptions will now be traced.
221 msg.tmode.break = Exceptions will now stop the debug target.
222 msn.iasmode = Initialize at Startup is now %1$S.
223 msn.layout.list = The following layouts have already been saved [%1$S]. Use ``save-layout <name>'' to save the current layout, or ``restore-layout <name>'' to restore a specific layout.
224 msn.chrome.filter = Chrome filtering is now %1$S.
225 # 1 value, 2 frame
226 msn.exception.trace = Exception ``%1$S'' thrown from %2$S.
227 # 1 message, 2 flags, 3 file, 4 line, 5 pos
228 msn.erpt.error = Error ``%1$S'' [%2$S] in file ``%3$S'', line %4$S, character %5$S.
229 msn.erpt.warn = Warning ``%1$S'' [%2$S] in file ``%3$S'', line %4$S, character %5$S.
230 msn.profile.lost = Lost profile data for script %1$S.
231 msn.profile.state = Profile data collection is now %1$S.
232 msn.profile.saved = Profile data saved to <%1$S>.
233 msg.profile.cleared = Profile data cleared.
234 msn.profile.saving = Generating profile report, file %1$S of %2$S
235 msg.open.file = Open File…
236 msg.save.file = Save As…
237 msg.open.url = Enter a URL to Load…
238 msn.maxtabs.reached = The maximum number of source views (%1$S) has been reached. Alter the "source2View.maxTabs" preference if you want to change this limit. Source will now load in an existing tab.
239 msg.maxtabs.alert = Warn me again next time this happens.
240 msg.save.profile = Save Profile Data As…
241 msg.save.source = Save Source As…
242 msg.navigator.xul = Navigator Window
243 msg.browser.xul = Browser Window
244 msg.enter.watch = Enter expression to watch:
246 ## property value flags ##
247 msg.vf.enumerable = e
248 msg.vf.readonly = r
249 msg.vf.permanent = p
250 msg.vf.alias = A
251 msg.vf.argument = a
252 msg.vf.variable = v
253 msg.vf.error = E
254 msg.vf.exception = X
255 msg.vf.hinted = h
257 ## formatting ##
259 # 1: argument name, 2: value
260 msn.fmt.argument = %1$S=%2$S"
261 # 1: property flags, 2: property name, 3: property value
262 msn.fmt.property = [%1$S] %2$S = %3$S"
263 # 1: function name, 2: filename
264 msn.fmt.script = function %1$S in <%2$S>
265 # 1: function name, 2: arguments, 3: filename, 4: line number
266 msn.fmt.frame = function %1$S(%2$S) in <%3$S> line %4$S
267 # 1: type, 2: class name, 3: value
268 msn.fmt.value.long = [%1$S] [class: %2$S] %3$S"
269 # 1: type, 2: value
270 msn.fmt.value.med = [%1$S] %2$S"
271 # 1: type, 2: value
272 msn.fmt.value.short = %1$S:%2$S"
273 # 1: property count
274 msn.fmt.object = %1$S properties
275 # 1: ctor name, 2: property count
276 msn.fmt.object.value = {%1$S:%2$S}
277 # 1: JS exception name, 2: error text, 3: file name, 4: line number
278 msn.fmt.jsexception = %1$S: %2$S @ <%3$S> %4$S"
279 # 1: error number, 2: error text, 3: file name, 4: line number, 5: function name
280 msn.fmt.badmojo = BadMojo %1$S: %2$S @ <%3$S> line %4$S (%5$S)
281 # 1: var number, 2: value
282 msn.fmt.tmp.assign = $[%1$S] = %2$S"
283 # 1: string length
284 msn.fmt.longstr = %1$S characters
285 # 1: command name 2: parameters
286 msn.fmt.usage = %1$S %2$S
287 # 1: function name
288 msn.fmt.guessedname = [%1$S]
289 # 1: program counter
290 msn.fmt.pc = [%1$S]
291 # 1: pref name 2: value
292 msn.fmt.prefvalue = Preference ``%1$S'' is ``%2$S''
293 # 1: index, 2: label, 3: value
294 msn.fmt.watch.item = %1$S: %2$S = %3$S"
295 # 1: on|off
296 msn.fmt.pprint = Pretty Print is %1$S.
297 # 1: frame number, 2: frame string
298 msn.fmt.frame.line = #%1$S: %2$S"
299 # 1: file name, 2: line number, 3: pc
300 msn.fmt.frame.location = %1$S, line %2$S, pc %3$S
301 # 1: function name, 2: start line, 3: end line, 4: call count, 5: recurse,
302 # 6: total, 7: min, 8: max, 9: avg
303 msn.fmt.profile.str = %1$S: %2$S-%3$S, %4$S call(s)%5$S, %6$Sms total, %7$Sms min, %8$Sms max, %9$Sms avg, excluding calls: %10$S
304 msn.fmt.profile.str2 = %1$Sms total, %2$Sms min, %3$Sms max, %4$Sms avg
305 # 1: max recurse depth
306 msn.fmt.profile.recurse = " (max depth %1$S)
308 ## menu headings ##
309 msg.mnu.file = &File
310 msg.mnu.edit = &Edit
311 msg.mnu.debug = &Debug
312 msg.mnu.profile = &Profile
313 msg.mnu.view = &View
314 msg.mnu.help = &Help
315 msg.mnu.tools = &Tools
316 msg.mnu.emode = &Error Trigger
317 msg.mnu.tmode = Throw Tri&gger
318 msg.mnu.showhide = Sho&w/Hide
319 msg.mnu.session.colors = Interactive Session Co&lors
320 msg.mnu.scripts.instance = F&ile Options
321 msg.mnu.scripts.wrapper = Func&tion Options
323 msn.sourceheader.url = <%1$S> Line %2$S
324 msn.default.alias.help = This command is an alias for |%1$S|.
326 msn.launch.count = Recorded local startup %1$S, global %2$S.
327 msg.no.help = Help not available.
328 msn.extra.params = Extra parameters ``%1$S'' ignored.
329 msg.files.rec = Files
330 #msg.doc.consolehdr = Console Commands
331 #msg.doc.menuhdr = Menus
332 #msg.doc.popuphdr = Popups
333 #msg.doc.keyhdr = Keys
335 msg.note.console = This command is available from the console.
336 msg.note.noconsole = This command is NOT available from the console.
337 msg.note.needstack = You must be stopped at a breakpoint to use this command.
338 msg.note.nostack = You CANNOT be stopped at a breakpoint to use this command.
339 msn.doc.commandlabel = " Command Name: ``%1$S'' (%2$S)
340 msn.doc.key = "Keyboard Shortcut: %1$S
341 msn.doc.syntax = " Syntax: %1$S %2$S
342 msg.doc.notes = Notes:
343 msg.doc.description = Description:
345 msn.session.css = Interactive Session now using CSS from <%1$S>.
346 msn.session.title = Interactive Session [context: %1$S, scope: %2$S]
348 msg.source2.help = Please select a source file to display.
349 msg.margin.break = " B "
350 msg.margin.fbreak = " F "
351 msg.margin.breakable = " - "
352 msg.margin.none = " "
354 msg.bpprops.title = Breakpoint Properties
355 msg.bpprops.enabled = Enable breakpoint
356 msg.fbpprops.title = Future Breakpoint Properties
357 msg.fbpprops.enabled = Enable future breakpoint
359 # view captions
360 msg.view.breaks = Breakpoints
361 msg.view.stack = Call Stack
362 msg.view.session = Interactive Session
363 msg.view.locals = Local Variables
364 msg.view.scripts = Loaded Scripts
365 msg.view.windows = Open Windows
366 msg.view.source = Source Code
367 msg.view.source2 = Source Code
368 msg.view.watches = Watches
370 # settings file return values
371 msg.breakpoints.restored = Breakpoints restored.
372 msg.watches.restored = Watches restored.
373 msg.settings.restored = Breakpoints and watches restored.
375 ###################### DO NO LOCALIZE THE *.params STRINGS ######################
377 ## hooks ##
379 cmd.hook-break-clear.params = <break-wrapper>
380 cmd.hook-break-clear.help = Called when a breakpoint instance is cleared.
382 cmd.hook-break-set.params = <break-wrapper>
383 cmd.hook-break-set.help = Called when a breakpoint instance is set.
385 cmd.hook-debug-stop.help = Called when the debugger stops execution of the debug target.
387 cmd.hook-debug-continue.help = Called when the debugger continues execution of the debug target.
389 cmd.hook-display-sourcetext.params = <source-text> [<target-line> [<details>]]
390 cmd.hook-display-sourcetext.help = Called when the source text object <source-text> should be presented to the user. <target-line> is the line which should appear at or near the top of the display. If <details> is provided, it will be an object representing details about where the <source-text> object was derived from.
392 cmd.hook-display-sourcetext-soft.params = <source-text> [<target-line> [<details>]]
393 cmd.hook-display-sourcetext-soft.help = Functions the same as |hook-display-sourcetext|, except the display should not be scrolled if <target-line> is already visible.
395 cmd.hook-eval-done.help = Called when an expression is evaluated.
397 cmd.hook-fbreak-clear.params = <fbreak>
398 cmd.hook-fbreak-clear.help = Called when a breakpoint instace is cleared.
400 cmd.hook-fbreak-set.params = <fbreak>
401 cmd.hook-fbreak-set.help = Called when a breakpoint instace is set.
403 cmd.hook-guess-complete.params = <script-instance>
404 cmd.hook-guess-complete.help = Called when function name guessing has completed for the script instance <script-instance>.
406 cmd.hook-session-display.params = <message> <msgtype>
407 cmd.hook-session-display.help = Called when a message should be appended to the interactive session display. <message> is the message as a string, or DOM node, <msgtype> is the message's type code.
409 cmd.hook-script-manager-created.params = <script-manager>
410 cmd.hook-script-manager-created.help = Called when a new script manager is created. Script managers delegate commands to one or more script-instance objects. <script-manager> will be the new script manager object. Script managers can be found keyed by URL in the |console.scriptManagers| object.
412 cmd.hook-script-manager-destroyed.params = <script-manager>
413 cmd.hook-script-manager-destroyed.help = Called after <script-manager> has been removed from the |console.scriptManagers| object. This happens after last contained script-instance is destroyed.
415 cmd.hook-script-instance-created.params = <script-instance>
416 cmd.hook-script-instance-created.help = Called when a new script instance is created. Script instances delegate commands to one or more script-wrappers.
419 cmd.hook-script-instance-sealed.params = <script-instance>
420 cmd.hook-script-instance-sealed.help = Called when <script-instance> is sealed. Script instances are ``sealed'' when the top level function is created. This signifies that the script source has been completely compiled. Any non-function scripts created after this point will appear as a transient in the parent script-manager.
422 cmd.hook-script-instance-destroyed.params = <script-instance>
423 cmd.hook-script-instance-destroyed.help = Called when the final script-wrapper contained by <script-instance> is invalidated.
425 cmd.hook-source-load-complete.params = <sourceText> <status>
426 cmd.hook-source-load-complete.help = Called when the source text represented by the object <sourceText> is loaded (or reloaded.) <status> indicates the status of the load. A <status> of 0 indicates success, non-zero values indicate a failure.
428 cmd.hook-transient-script.params = <script-wrapper>
429 cmd.hook-transient-script.help = Called when a script object that appears to be transient (the result of an eval, setTimeout, etc.) is created by the JavaScript engine.
431 cmd.hook-window-closed.params = <window>
432 cmd.hook-window-closed.help = Called when a window object is destroyed. <window> is a reference to the DOM window object for the window.
434 cmd.hook-window-loaded.params = <event>
435 cmd.hook-window-loaded.help = Called when a source file is loaded into a window object. <event> is a reference to the DOM event passed to the onLoad handler of the window.
437 cmd.hook-window-opened.params = <window>
438 cmd.hook-window-opened.help = Called when a new window object is opened. The source for this window will most likely *not* be loaded at this point. <window> is a reference to the DOM window object for the new window.
440 cmd.hook-window-resized.params = <window>
441 cmd.hook-window-resized.help = Called when the main Venkman window or a floating window is resized. <window> will be a reference to the window object.
443 cmd.hook-window-unloaded.params = <event>
444 cmd.hook-window-unloaded.help = Called when a source file is unloaded from a window object. <event> is a reference to the DOM event passed to the onUnload handler of the window.
446 cmd.hook-venkman-exit.help = Called before the debugger exits.
448 cmd.hook-venkman-query-exit.help = Called when the debugger would like to exit. A hook function can set |returnValue| on the event to |false| to cancel the exit.
450 cmd.hook-venkman-started.help = Called when the debugger first starts up.
452 ## commands ##
454 cmd.about-mozilla.label = &About Mozilla
455 cmd.about-mozilla.help = Display information about your Mozilla installation.
457 cmd.break.label = S&et Breakpoint
458 cmd.break.params = [<url-pattern> <line-number> [<properties> [<parent>]]]
459 cmd.break.help = Set a breakpoint in all urls matching <url-pattern> at the line number <line-number>. <properties> is a JavaScript object representing the properties of the breakpoint. <parent> is a reference to the Future Breakpoint object to assign as the parent. If no parameters are specified all active breakpoints will be listed. See also: |set-fbreak|, |clear|.
461 cmd.break-props.label = Breakpoint &Properties…
462 cmd.break-props.params = <break-wrapper>
463 cmd.break-props.help = Display the properties dialog for the breakpoint represented by <break-wrapper>.
465 cmd.change-container.params = <view-id> <new-type>
466 cmd.change-container.help = Changes the type of the container in which <view-id> resides to <new-type>. <view-id> must be one of: ``scripts'', ``windows'', ``locals'', ``watches'', ``breaks'', ``stack'', ``source'', ``source2'', or ``session''. <new-type> must be one of: ``horizontal'' for a horizontal layout, ``vertical'' for a vertical layout, or ``tab'' for a tab box layout.
468 cmd.change-value.label = Change &Value…
469 cmd.change-value.params = <parent-value> <property-name> [<new-value>]
470 cmd.change-value.help = Changes the value of the property named <property-name> of the jsdValue <parent-value>. If the jsdValue <new-value> is specified, this will become the new value of the property, otherwise a dialog box is displayed, allowing the user to enter a new expression for the value.
472 cmd.chrome-filter.params = [<toggle>]
473 cmd.chrome-filter.help = Enables or disabled the filtering of chrome: urls. With chrome: filtering on, the JavaScript files which make up the browser will not be displayed in the Script View, and the debugger will not step through them while debugging. The value of <toggle> can be |true|, |on|, |yes|, or |1| to turn the flag on; |false|, |off|, |no|, or |0| to turn it off; or |toggle| to invert the current state. If <toggle> is not provided, the current state will be displayed.
475 cmd.clear.label = C&lear Breakpoint
476 cmd.clear.params = <url-pattern> [<line-number>]
477 cmd.clear.help = Clears breakpoints in files which match <url-pattern>. If <line-number> is provided, only breakpoints at that line will be cleared.
479 cmd.clear-all.label = Clear &All Breakpoints
480 cmd.clear-all.help = Clears every breakpoint currently defined.
482 cmd.clear-break.label = &Clear Breakpoint
483 cmd.clear-break.params = <break-wrapper> [<...>]
484 cmd.clear-break.help = Clear the breakpoint wrapped by <break-wrapper>. If <break-wrapper> is a future breakpoint object, all child breakpoints will be cleared, but the future breakpoint will remain.
486 cmd.clear-fbreak.label = Clear &Future Breakpoint
487 cmd.clear-fbreak.params = <break-wrapper> [<...>]
488 cmd.clear-fbreak.help = Clear the future breakpoint wrapped by <break-wrapper>. If <break-wrapper> is a breakpoint instance object, the instance's parent future breakpoint will be cleared, but the instance will remain. If the instance has no parent future breakpoint, the wrapper will be ignored.
490 cmd.clear-profile.label = C&lear Profile Data
491 cmd.clear-profile.help = Zeros out any existing profile data.
493 cmd.clear-session.label = Cle&ar Interactive Session
494 cmd.clear-session.help = Clears all text in the Interactive Session view.
496 cmd.clear-script.label = &Clear Breakpoint
497 cmd.clear-script.params = <script-wrapper> [<...>]
498 cmd.clear-script.help = Clear all breakpoints in the script wrapped by <script-wrapper>.
500 cmd.clear-instance.label = &Clear Breakpoint
501 cmd.clear-instance.params = <script-instance> [<...>]
502 cmd.clear-instance.help = Clear all breakpoints in the script instance referred to by <script-instance>.
504 cmd.close.label = Close &Window
505 cmd.close.help = Close the debugger.
507 cmd.cmd-docommand.params = <cmd-name>
508 cmd.cmd-docommand.help =
510 cmd.cmd-undo.label = &Undo
511 cmd.cmd-undo.key = accel Z
512 cmd.cmd-undo.params =
513 cmd.cmd-undo.help = Undoes the last edit operation.
515 cmd.cmd-redo.label = &Redo
516 cmd.cmd-redo.key = accel Y
517 cmd.cmd-redo.params =
518 cmd.cmd-redo.help = Redoes the last undone operation.
520 cmd.cmd-cut.label = Cu&t
521 cmd.cmd-cut.key = accel X
522 cmd.cmd-cut.params =
523 cmd.cmd-cut.help = Copies the currently-selected text to clipboard, and removes it from the source.
525 cmd.cmd-copy.label = &Copy
526 cmd.cmd-copy.key = accel C
527 cmd.cmd-copy.params =
528 cmd.cmd-copy.help = Copies the currently-selected text to clipboard.
530 cmd.cmd-paste.label = &Paste
531 cmd.cmd-paste.key = accel V
532 cmd.cmd-paste.params =
533 cmd.cmd-paste.help = Pastes the contents of clipboard.
535 cmd.cmd-delete.label = &Delete
536 cmd.cmd-delete.key = VK_DELETE
537 cmd.cmd-delete.params =
538 cmd.cmd-delete.help = Deletes the current selection.
540 cmd.cmd-selectall.label = Select &All
541 cmd.cmd-selectall.key = accel A
542 cmd.cmd-selectall.params =
543 cmd.cmd-selectall.help = Selects all the text in the current view.
545 cmd.cmd-copy-link-url.label = Copy Link Location
546 cmd.cmd-copy-link-url.params = <url>
547 cmd.cmd-copy-link-url.help = Copies the URL of the current link to clipboard.
549 cmd.cmd-mozilla-prefs.label = &Mozilla Preferences…
550 cmd.cmd-mozilla-prefs.params =
551 cmd.cmd-mozilla-prefs.help =
553 cmd.cmd-prefs.label = Pr&eferences…
554 cmd.cmd-prefs.params =
555 cmd.cmd-prefs.help =
557 cmd.cmd-venkman-prefs.label = JavaScript Debugger Pr&eferences…
558 cmd.cmd-venkman-prefs.params =
559 cmd.cmd-venkman-prefs.help =
561 cmd.cmd-venkman-opts.label = &Options…
562 cmd.cmd-venkman-opts.params =
563 cmd.cmd-venkman-opts.help =
565 cmd.commands.params = [<pattern>]
566 cmd.commands.help = Lists all command names matching <pattern>, or all command names if pattern is not specified.
568 cmd.copy-frames.label = &Copy Selected Frames
569 cmd.copy-frames.params = <jsd-frame> [<...>]
570 cmd.copy-frames.help = Copy the selected frames to the clipboard.
572 cmd.copy-qual-name.label = Copy &Qualified Name
573 cmd.copy-qual-name.params = <expression>
574 cmd.copy-qual-name.help = Copies the qualified name of a variable to the clipboard.
576 cmd.cont.label = &Continue
577 cmd.cont.key = VK_F5
578 cmd.cont.tip = Continue debugging
579 cmd.cont.help = Continue execution of the debug target.
581 cmd.debug-script.label = Don't &Debug
582 cmd.debug-script.params = <toggle> <script-wrapper> [<...>]
583 cmd.debug-script.help = Enable or disable debugging in the script wrapper <script-wrapper>. While debugging is disabled, Venkman will *not* stop in the disabled scripts. The value of <toggle> can be |true|, |on|, |yes|, or |1| to turn the flag on; |false|, |off|, |no|, or |0| to turn it off; or |toggle| to invert the current state.
585 cmd.debug-instance-on.label = &Don't Debug Contained Functions
586 cmd.debug-instance-on.params = <script-instance> [<...>]
587 cmd.debug-instance-on.help = Disable debugging in all functions contained by the script instance <script-instance>.
589 cmd.debug-instance-off.label = D&ebug Contained Functions
590 cmd.debug-instance-off.params = <script-instance> [<...>]
591 cmd.debug-instance-off.help = Enable debugging in all functions contained by the script instance <script-instance>.
593 cmd.debug-instance.label = &Toggle Debugging Contained Functions
594 cmd.debug-instance.params = <toggle> <script-instance> [<...>]
595 cmd.debug-instance.help = Enable or disable debugging in all functions contained by the script instance <script-instance>. While debugging is disabled, Venkman will *not* stop in the disabled scripts. The value of <toggle> can be |true|, |on|, |yes|, or |1| to turn the flag on; |false|, |off|, |no|, or |0| to turn it off; or |toggle| to invert the current state.
597 cmd.debug-transient.label = Don't Debug Eval/Ti&meouts
598 cmd.debug-transient.params = <toggle> <url> [<...>]
599 cmd.debug-transient.help = Enable or disable debugging of transient scripts (like setTimeout() or eval()) associated with the url <url>. The value of <toggle> can be |true|, |on|, |yes|, or |1| to turn the flag on; |false|, |off|, |no|, or |0| to turn it off; or |toggle| to invert the current state.
601 cmd.dumpprofile.label = Dump Profile Data
602 cmd.dumpprofile.params = [<file-name>]
604 cmd.dumptree.params = <tree> [<depth>]
606 cmd.emode.params = [<mode>]
607 cmd.emode.help = Sets what action the debugger should take when an error occurs in the debug target. |emode ignore| ignores all errors, |emode trace| shows a log of the error in the console, and |emode break| stops execution when an error is thrown. |emode| without any parameter will display the current error mode. Note that |emode| controls what happens when an exception goes uncaught, to control what happens when an exception is *thrown*, use |tmode|.
609 cmd.eval.params = <expression>
610 cmd.eval.help = Evaluates <expression> in the scope of the debug target's current frame. See also: |frame|, |where|, |props|, and |evald|.
612 cmd.evald.params = <expression>
613 cmd.evald.help = Evaluates <expression> in the debugger's scope. See also: |eval|.
615 cmd.em-break.label = Stop for E&rrors
616 cmd.em-cycle.label = Cycle Error Mode
617 cmd.em-cycle.key = accel shift E
618 cmd.em-ignore.label = Ig&nore Errors
619 cmd.em-trace.label = Tr&ace Errors
621 cmd.fbreak.label = Set &Future Breakpoint
622 cmd.fbreak.params = [<url-pattern> <line-number> [<properties>]]
623 cmd.fbreak.help = Sets a ``future'' breakpoint. Any time a script whose file name matches <url-pattern> is loaded, a breakpoint a <line-number> is set. Setting a breakpoint at line 1 will cause the debugger to break when the script is loaded. fbreak with no parameters will list all future breakponts. <properties> is a JavaScript object representing the properties for this breakpoint. This command is the same as |set-fbreak|, except the parameters are optional. See also: |break|.
625 cmd.set-break.label = S&et Breakpoint
626 cmd.set-break.params = <url-pattern> <line-number> [<properties> [<parent>]]
627 cmd.set-break.help = Set a breakpoint in all urls matching <url-pattern> at the line number <line-number>. <properties> is a JavaScript object representing the properties of the breakpoint. <parent> is a reference to the Future Breakpoint object to assign as the parent. This is the same as the |break| command, except the parameters are required. See also: |break|, |clear|.
629 cmd.set-fbreak.label = Set &Future Breakpoint
630 cmd.set-fbreak.params = <url-pattern> <line-number> [<properties>]
631 cmd.set-fbreak.help = Sets a ``future'' breakpoint. Any time a script whose file name matches <url-pattern> is loaded, a breakpoint a <line-number> is set. Setting a breakpoint at line 1 will cause the debugger to break when the script is loaded. <properties> is a JavaScript object representing the properties for this breakpoint. This command is the same as |fbreak|, except the parameters are not optional. See also: |break|.
633 cmd.fclear.label = Clear F&uture Breakpoint
634 cmd.fclear.params = <url-pattern> [<line-number>]
635 cmd.fclear.help = Clears the future breakpoint(s) set for <url-pattern>. If <line-number> is specified, only future breakpoints at that line are cleared.
637 cmd.fclear-all.label = Clear All Fu&ture Breakpoints
638 cmd.fclear-all.help = Clears all future breakpoints currently defined.
640 cmd.find-bp.label = Find &Breakpoint
641 cmd.find-bp.params = <breakpoint>
642 cmd.find-bp.help = Focus the breakpoint specified by the Breakpoint object <breakpoint>.
644 cmd.find-creator.label = Find &Creator
645 cmd.find-creator.params = <jsd-value>
646 cmd.find-creator.help = Focus the creator of the object referenced by the jsdIValue <jsd-value>.
648 cmd.find-ctor.label = Find C&onstructor
649 cmd.find-ctor.params = <jsd-value>
650 cmd.find-ctor.help = Focus the constructor of the object referenced by the jsdIValue <jsd-value>.
652 cmd.find-file.label = &Open File…
653 cmd.find-file.key = accel O
654 cmd.find-file.params = [<file-name>]
655 cmd.find-file.help = Displays the contents of the file located at <file-name> in the script view, where <file-name> is an operating system specific path string. If <file-name> is not provided, or is the character '?', a file chooser widget will be displayed.
657 cmd.find-frame.label = Find &Frame Source
658 cmd.find-frame.params = <frame-index>
659 cmd.find-frame.help = Focus the stack frame specified by the frame at index <frame-index>.
661 cmd.find-script.label = Find F&unction
662 cmd.find-script.params = <script-wrapper> [<target-pc>]
663 cmd.find-script.help = Focus the script wrapped by <script-wrapper>. If <target-pc> is provided, the view will be scrolled to display the associated line.
665 cmd.find-sourcetext.params = <source-text> [<range-start> [<range-end> [<details> [<target-line>]]]]
666 cmd.find-sourcetext.help = Displays the source text object <sourceText>. All of the text between <range-start> and <range-end> will be highlighted. If <details> is provided, it will be an object representing details about where the <source-text> object was derived from. If <target-line> is provided, the view will be scrolled to that line, otherwise the view will be scrolled to <range-start>.
668 cmd.find-sourcetext-soft.params = <source-text> [<range-start> [<range-end> [<details> [<target-line>]]]]
669 cmd.find-sourcetext-soft.help = Functions the same as |find-sourcetext|, except the view is not scrolled if <target-line> is already visible.
671 cmd.find-string.label = Fin&d in This File…
672 cmd.find-string.key = accel F
673 cmd.find-string.help = Brings up a ``Find Dialog'' for the currently selected tab.
675 cmd.find-scriptinstance.label = &Find File
676 cmd.find-scriptinstance.params = <script-instance> [<range-start> [<range-end> [<details> [<target-line>]]]]
677 cmd.find-scriptinstance.help = Displays the source text associated with the script instance <script-instance>. All of the text between <range-start> and <range-end> will be highlighted. If <details> is provided, it will be an object representing details about where the <script-instance> object was derived from. If <target-line> is provided, the view will be scrolled to that line, otherwise the view will be scrolled to <range-start>.
679 cmd.find-url.label = &Find URL
680 cmd.find-url.params = <url> [<range-start> [<range-end> [<details> [<target-line>]]]]
681 cmd.find-url.help = Displays the contents of the URL <url> in the source view. All of the text between <range-start> and <range-end> will be highlighted. If <details> is provided, it will be an object representing details about where the <url> object was derived from. If <target-line> is provided, the view will be scrolled to that line, otherwise the view will be scrolled to <range-start>.
683 cmd.find-url-soft.label = &Soft Focus URL
684 cmd.find-url-soft.params = <url> [<range-start> [<range-end> [<details> [<target-line>]]]]
685 cmd.find-url-soft.help = Functions the same as |find-url|, except the view is not scrolled if <target-line> is already visible.
687 cmd.finish.label = S&tep Out
688 cmd.finish.key = shift VK_F11
689 cmd.finish.tip = Step out of the current function
690 cmd.finish.help = Execute until the current stack frame returns.
692 cmd.focus-input.key = VK_ESCAPE
693 cmd.focus-input.help = Places focus in the console's text input widget.
695 cmd.frame.label = Set &Current Frame
696 cmd.frame.params = [<frame-index>]
697 cmd.frame.help = Sets the current frame to the one numbered <frame-index>, and displays a summary of the frame. If <frame-index> is not provided, a summary of the current frame will be displayed. Use the where command to list available frames and frame numbers.
699 cmd.gc.help = Force the JavaScript garbage collector to run. This may force unloaded scripts to be removed from the Loaded Scripts view.
701 cmd.help.label = &Command Reference
702 cmd.help.params = [<pattern>]
703 cmd.help.help = Displays help on <pattern>, which can be a full command name, or the first few characters of the command name. If <pattern> matches more than one command, help on all matching commands will be displayed. If <pattern> is not provided, a command reference will be loaded in a browser window.
705 cmd.inspect.label = &Inspect in DOM Inspector
706 cmd.inspect.params = [<expression>]
707 cmd.inspect.help = Inspects the result of <expression> in DOM Inspector.
709 cmd.loadd.label = Load Script in Debugger Scope
710 cmd.loadd.params = <url>
711 cmd.loadd.help = Executes the contents of the url specified by <url> in the context of the debugger. Useful for loading debugger plugins. See also: The |initialScripts| pref.
713 cmd.move-view.params = <view-id> <location-url>
714 cmd.move-view.help = Moves the view associated with <view-id> to the location specified by <location-url>.
716 cmd.mozilla-help.label = &Help Contents
717 cmd.mozilla-help.help = Display the table of contents for the Mozilla help system.
719 cmd.next.label = Step &Over
720 cmd.next.key = VK_F12
721 cmd.next.tip = Step over function call
722 cmd.next.help = Executes the next line of script. If a function call is encountered it is traced as a single instruction.
724 cmd.open-dialog.params = <url> [<window-name> [<window-flags>]]
725 cmd.open-dialog.help = Opens a dialog window and loads the source from <url>. This is typically used to open a new XUL window, though it can be used to load a web page without chrome.
727 cmd.open-url.help = Prompts the user for a url to load in the source view.
728 cmd.open-url.label = Open Web &Location…
729 cmd.open-url.key = accel shift L
731 cmd.pprint.params = [<toggle>]
732 cmd.pprint.help = Set or display the state of Pretty Print mode. The value of <toggle> can be |true|, |on|, |yes|, or |1| to turn the flag on; |false|, |off|, |no|, or |0| to turn it off; or |toggle| to invert the current state. If <toggle> is not provided, the current state will be displayed.
734 cmd.pref.params = [<pref-name> [<pref-value> [<delete-pref>]]]
735 cmd.pref.help = Sets the value of the preference named <pref-name> to the value of <pref-value>. If <pref-value> is not provided, the current value of <pref-name> will be displayed. If both <pref-name> and <pref-value> are omitted, all preferences will be displayed. If <delete-pref> is provided and is |true|, |on|, |yes|, or |1|, or if <pref-name> starts with a minus ('-') character, then the preference will revert back to its default value.
737 cmd.profile.params = [<toggle>]
738 cmd.profile.help = Enables or disables the collection of profile data. The value of <toggle> can be |true|, |on|, |yes|, or |1| to turn the flag on; |false|, |off|, |no|, or |0| to turn it off; or |toggle| to invert the current state. If <toggle> is not provided, the current state will be displayed.
740 cmd.profile-script.label = Don't &Profile
741 cmd.profile-script.params = <toggle> <script-wrapper> [<...>]
742 cmd.profile-script.help = Enable or disable profiling the script <script-wrapper>. While profiling is disabled, data will be discarded. The value of <toggle> can be |true|, |on|, |yes|, or |1| to turn the flag on; |false|, |off|, |no|, or |0| to turn it off; or |toggle| to invert the current state. If <toggle> is not provided, the current state will be displayed.
744 cmd.profile-instance.label = Toggle Profilin&g Contained Functions
745 cmd.profile-instance.params = <toggle> <script-instance> [<...>]
746 cmd.profile-instance.help = Enable or disable profiling in all functions contained by the script instance <script-instance>. While profiling is disabled, data will be discarded. The value of <toggle> can be |true|, |on|, |yes|, or |1| to turn the flag on; |false|, |off|, |no|, or |0| to turn it off; or |toggle| to invert the current state.
748 cmd.profile-instance-on.label = Don't &Profile Contained Functions
749 cmd.profile-instance-on.params = <script-instance> [<...>]
750 cmd.profile-instance-on.help = Disable profiling in all functions contained by the script instance <script-instance>.
752 cmd.profile-instance-off.label = Profile &Contained Functions
753 cmd.profile-instance-off.params = <script-instance> [<...>]
754 cmd.profile-instance-off.help = Enable profiling in all functions contained by the script instance <script-instance>.
756 cmd.profile-tb.label = Profile
757 cmd.profile-tb.tip = Toggle profile mode
759 cmd.props.params = <expression>
760 cmd.props.help = Lists the properties of the value returned by <expression>. The expression is evaluated in the scope of the debug target's current frame. See also: |where|, |frame|, |eval|, and |propsd|.
762 cmd.propsd.params = <expression>
763 cmd.propsd.help = Lists the properties of the value returned by <expression>. The expression is evaluated in the debugger's scope. See also: |props|.
765 cmd.exit.label = &Exit
766 cmd.exit.key = accel Q
768 cmd.quit.label = &Quit
769 cmd.quit.key = accel Q
770 cmd.quit.help = Quit Mozilla.
772 cmd.reload-source-tab.label = &Reload Source
773 cmd.reload-source-tab.params = [<index>]
774 cmd.reload-source-tab.key = accel R
775 cmd.reload-source-tab.help = Reload the source in the tab located at the index specified by <index>. If <index> is not provided, the current tab will be reloaded.
777 cmd.release-notes.label = &Release Notes
778 cmd.release-notes.help = Display the Mozilla release notes.
780 cmd.close-source-tab.label = &Close Tab
781 cmd.close-source-tab.key = accel W
782 cmd.close-source-tab.params = [<index>]
783 cmd.close-source-tab.help = Close the tab located at the index specified by <index>. If <index> is not provided, the current tab will be closed.
785 cmd.restore-layout.params = [<name>]
786 cmd.restore-layout.help = Restores the view layout named <name>. If <name> is not provided, the list of available layouts will be displayed. The special name |factory| can be used to restore a default layout.
788 cmd.restore-settings.label = Restore Break/Watch Se&ttings…
789 cmd.restore-settings.params = [<settings-file>]
790 cmd.restore-settings.help = This command is basically an alias to |loadd|, except that <settings-file> is optional. If <settings-file> is not provided, or is ``?'', a file chooser widget will be displayed. This command is placed in the context menu of the Breakpoints and Watch views to make it easy to restore saved breakpoints and watches.
792 cmd.reloadui.key = accel alt R
794 cmd.run-to.label = Run To &Line
795 cmd.run-to.params = <script-wrapper> <pc>
796 cmd.run-to.help = Continue execution until program counter specified by <pc>, in the script specified by <script-wrapper> is reached. The has the effect of setting a ``one time'' breakpoint at the line in question.
798 cmd.save-default-layout.label = &Save Default Layout Now
800 cmd.save-layout.params = [<name>]
801 cmd.save-layout.help = Saves the current window layout, giving it the name <name>. The layout can be restored later with the |restore-layout| command. If <name> is not provided, the list of available layouts will be displayed. Save to the name ``default'' to set the default layout Venkman restores on startup. The ``factory'' layout cannot be overwritten.
803 cmd.save-source-tab.label = &Save Source As…
804 cmd.save-source-tab.params = [<index> [<target-file>]]
805 cmd.save-source-tab.key = accel S
806 cmd.save-source-tab.help = Saves the contents of the source file displayed in the tab at the position specified by <index> to a file on the local system. If <index> is not provided, the current tab is saved. If <target-file> is not provided, or is the character '?', a file chooser widget will be displayed. <target-file> is an operating system specific path string.
808 cmd.save-profile.label = Save P&rofile Data As…
809 cmd.save-profile.params = [<target-file> [<url> [<...>]]
810 cmd.save-profile.help = Saves the profile data collected for one or more source files specified by <url> into the file at <target-file>. If <target-file> is not provided, or is the character '?', a file chooser widget will be displayed. If <url> is not provided, all profile data is saved. <target-file> is an operating system specific path string, <url> is a complete url.
812 cmd.save-breakpoints.label = &Save Breakpoint Settings…
813 cmd.save-breakpoints.params = [<settings-file>]
814 cmd.save-breakpoints.help = Save the current list of breakpoints to a JavaScript file, so that they can be restored later. If <settings-file> is not provided, or is the character '?', a file chooser widget will be displayed. <settings-file> can be a reference to a |LocalFile| object or a string representation of a native path. See also: |save-settings|, |save-watches|, |restore-settings|.
816 cmd.save-settings.label = Sa&ve Break/Watch Settings…
817 cmd.save-settings.params = [<settings-file>]
818 cmd.save-settings.help = Save the current list of breakpoints and watches to a JavaScript file, so that they can be restored later. If <settings-file> is not provided, or is the character '?', a file chooser widget will be displayed. <settings-file> can be a reference to a |LocalFile| object or a string representation of a native path. See also: |save-watches|, |save-breakpoints|, |restore-settings|.
820 cmd.save-watches.label = &Save Watch Settings…
821 cmd.save-watches.params = [<settings-file>]
822 cmd.save-watches.help = Save the current list of watches to a JavaScript file, so that they can be restored later. If <settings-file> is not provided, or is the character '?', a file chooser widget will be displayed. <settings-file> can be a reference to a |LocalFile| object or a string representation of a native path. See also: |save-settings|, |save-breakpoints|, |restore-settings|.
824 cmd.search-scripts.params = [<pattern>]
825 cmd.search-scripts.help = Removes any scripts with URLs that do not match <pattern> from the Loaded Scripts view. If <pattern> is not provided, all scripts will be displayed.
827 cmd.session-css.params = [<css>]
828 cmd.session-css.help = Sets the current CSS file used to style the Interactive Session. The value of <css> can be the text "default", "dark", or "light" OR a url to the CSS file to use. The "default" css uses your browser defaults as foreground and background colors, "dark" is dark background in light text, and "light" is light background with dark text. If <css> is not provided, the current value is printed.
830 cmd.session-css-default.label = &Browser Defaults
831 cmd.session-css-dark.label = &Dark Background/Light Text
832 cmd.session-css-light.label = &Light Background/Dark Text
834 cmd.set-eval-obj.label = Set as &Evaluation Object
835 cmd.set-eval-obj.params = <jsd-value>
836 cmd.set-eval-obj.help = Sets the current ``evaluation object'' for use with the |eval| command. The object referenced to by <jsd-value> will become the |this| object, and global variables will be resolved relative to the parent of <jsd-value>.
838 cmd.scan-source.label = &Scan For Meta Comments
839 cmd.scan-source.params = <script-instance>
840 cmd.scan-source.help = Scans the entire source file for comments in the form //@JSD_DIRECTIVE. By default, the directives recognized are //@JSD_LOG, //@JSD_BREAK, and //@JSD_EVAL. JSD_LOG evaluates whatever script follows it, logging the result to the Interactive Session view. JSD_BREAK inserts a conditional breakpoint a the next executable line. JSD_EVAL evaluates whatever script follows it, without logging or breaking. Users can add additional directives with plug ins.
842 cmd.scope.help = Lists the properties of the topmost object in the scope chain for the current frame.
844 cmd.toggle-forcescriptload.label = &Force function name guessing
846 cmd.toggle-functions.label = Include &Functions
848 cmd.show-functions.params = [<toggle>]
849 cmd.show-functions.help = Controls whether or not function properties (sometimes referred to as methods) will be displayed in the Local Varables and Watch views. After changing this value, you will need to close and open affected nodes in order to see the change. The value of <toggle> can be |true|, |on|, |yes|, or |1| to turn the flag on; |false|, |off|, |no|, or |0| to turn it off; or |toggle| to invert the current state. If <toggle> is not provided, the current state will be displayed.
851 cmd.toggle-ecmas.label = &Include ECMA Properties
853 cmd.show-ecmas.params = [<toggle>]
854 cmd.show-ecmas.help = Controls whether or not the ECMA [[Parent]] and [[Prototype]] properties will be displayed in the Local Varables and Watch views. After changing this value, you will need to close and open affected nodes in order to see the change. The value of <toggle> can be |true|, |on|, |yes|, or |1| to turn the flag on; |false|, |off|, |no|, or |0| to turn it off; or |toggle| to invert the current state. If <toggle> is not provided, the current state will be displayed.
856 cmd.toggle-constants.label = Include Cons&tants
858 cmd.show-constants.params = [<toggle>]
859 cmd.show-constants.help = Controls whether or not constant properties will be displayed in the Local Varables and Watch views. After changing this value, you will need to close and open affected nodes in order to see the change. The value of <toggle> can be |true|, |on|, |yes|, or |1| to turn the flag on; |false|, |off|, |no|, or |0| to turn it off; or |toggle| to invert the current state. If <toggle> is not provided, the current state will be displayed.
861 cmd.toggle-show-most-recent.label = E&xclude Duplicates
863 cmd.show-most-recent.params = [<toggle>]
864 cmd.show-most-recent.help = Controls whether the Loaded Scripts view should show only the most recent script from a given URL, or all of them. With this off, you may notice duplicate entries in the Loaded Scripts view. The value of <toggle> can be |true|, |on|, |yes|, or |1| to turn the flag on; |false|, |off|, |no|, or |0| to turn it off; or |toggle| to invert the current state. If <toggle> is not provided, the current state will be displayed.
866 cmd.show-profile.label = &Display Profile Data
867 cmd.show-profile.params = [<url> [<...>]]
868 cmd.show-profile.help = Displays the profile data collected for one or more source files specified by <url>. If <url> is not provided, all profile data is saved.
870 cmd.startup-init.label = Initialize at &Startup
871 cmd.startup-init.params = [<toggle>]
872 cmd.startup-init.help = Sets the state of the "Initialize at Startup" feature. With this feature enabled, the debugger will begin tracking scripts when the browser is first started, instead of waiting until the user interface is launched. This will allow the script list to display files that were loaded before you started the debugger user interface. This feature incurs a *slight* performance hit. The value of <toggle> can be |true|, |on|, |yes|, or |1| to turn the flag on; |false|, |off|, |no|, or |0| to turn it off; or |toggle| to invert the current state. If <toggle> is not provided, the current state will be displayed.
874 cmd.source-coloring.label = Colori&ze Source
875 cmd.source-coloring.params = [<toggle>]
876 cmd.source-coloring.help = Enables or disables the source code coloring feature in the Source Code view. When working with large files, or on a slow machine, source coloring may take too long to be practical. Turning off source coloring will make files load much faster. You will need to reload the source code to see the effect of changing this setting. If <toggle> is not provided, the current state will be displayed.
878 cmd.stop.label = Sto&p
879 cmd.stop.key = VK_F4
880 cmd.stop.tip = Stop the current operation
881 cmd.stop.help = Stop before the next line of code is executed.
883 cmd.step.label = Step &Into
884 cmd.step.key = VK_F11
885 cmd.step.tip = Step into function call
886 cmd.step.help = Executes the next line of script and stops.
888 cmd.testargs.params = <int> <word> [<word2> <word3>]
889 cmd.testargs.help = Function for testing argument parsing. Pass it what it wants, and it'll spit out the event object to stdout.
891 cmd.testargs1.params = <int> [<...>]
892 cmd.testargs1.help = Function for testing argument parsing. Pass it what it wants, and it'll spit out the event object to stdout.
894 cmd.this-expr.params = <expression>
895 cmd.this-expr.help = Sets the ``evaluation object'' to the result of <expression>. The evaluation object is used as the |this| object in all evaluations. The result of <expression> *must* be an object. See also: |eval|, |props|, |watch-expr|, and |set-eval-obj|.
897 cmd.tmode.params = [<mode>]
898 cmd.tmode.help = Sets what action the debugger should take when an exception is thrown from the debug target. |tmode ignore| ignores all exceptions, |tmode trace| shows a log of the exception to the console, and |tmode break| stops execution when an exception is thrown. |tmode| without any parameter will display the current throw mode. Note that |tmode| controls what happens when an exception is *thrown*, to control what happens when an exception reaches the top level and becomes an error, use |emode|. The key combination Control + T can be used to cycle the throw mode.
900 cmd.tm-break.label = Stop for &Exceptions
901 cmd.tm-cycle.label = Cycle Exception Mode
902 cmd.tm-cycle.key = accel T
903 cmd.tm-ignore.label = I&gnore Exceptions
904 cmd.tm-trace.label = T&race Exceptions
906 cmd.toggle-scripts-search-box.help = Toggles the visibility of the search controls in the Loaded Scripts view.
908 cmd.toggle-float.params = <view-id>
909 cmd.toggle-float.help = If the view specified by <view-id> is currently displayed in the main window, or is not visible, it will be placed in a new floating window. If <view-id> is already in a floating window, it will be placed back in the main window.
911 cmd.toggle-pprint.label = &Pretty Print
912 cmd.toggle-pprint.key = accel P
913 cmd.toggle-pprint.tip = Toggle pretty print mode
914 cmd.toggle-pprint.help = Toggle Pretty Print mode.
916 cmd.toggle-save-layout.label = Save Default Layout On &Exit
917 cmd.toggle-save-layout.help = If set, the window layout will be saved before Venkman exits.
919 cmd.toggle-save-settings.label = Save Break/Watch Settings On E&xit
920 cmd.toggle-save-settings.help = If set, the breakpoint and watch settings will be saved before Venkman exits, and restored at startup.
922 cmd.toggle-pref.params = <pref-name>
923 cmd.toggle-pref.help = Toggles the boolean preference specified by <pref-name>.
925 cmd.toggle-view.params = <view-id>
926 cmd.toggle-view.help = If the view specified by <view-id> is currently displayed, it will be hidden. Otherwise the view will be displayed in its last known location.
928 cmd.toggle-chrome.label = E&xclude Browser Files
929 cmd.toggle-profile.label = &Collect Profile Data
931 cmd.toggle-breaks.label = &Breakpoints
932 cmd.toggle-stack.label = &Call Stack
933 cmd.toggle-session.label = &Interactive Session
934 cmd.toggle-locals.label = &Local Variables
935 cmd.toggle-scripts.label = Loaded S&cripts
936 cmd.toggle-windows.label = &Open Windows
937 cmd.toggle-source.label = Source Code (old)
938 cmd.toggle-source2.label = So&urce Code
939 cmd.toggle-watches.label = &Watches
941 cmd.version.label = About &Venkman
942 cmd.version.help = Display version information.
944 cmd.remove-watch.label = &Remove Watch
945 cmd.remove-watch.params = <index> [<...>]
946 cmd.remove-watch.help = Removes the watch(es) at the 0 based index specified by <index>.
948 cmd.watch-expr.label = Add &Watch Expression…
949 cmd.watch-expr.params = [<watch-expression>]
950 cmd.watch-expr.help = Evaluates <expression> in the debug target scope and adds the result to the watch window. If <expression> is not provided, all watches are printed to the console.
952 cmd.watch-exprd.params = [<watch-expression>]
953 cmd.watch-exprd.help = Evaluates <expression> in the debugger scope and adds the result to the watch window. If <expression> is not provided, all watches are printed to the console.
955 cmd.watch-property.params = <jsd-value> <property-name>
956 cmd.watch-property.help = Adds the property named <property-name> of the object stored in <jsd-value> to the watch window.
958 cmd.where.label = Dump &Stack to Interactive Session
959 cmd.where.help = Displays a summarized list of stack frames in the current call chain.