?  search:
summary | log | graphiclog1 | graphiclog2 | commit | commitdiff | tree | refs | edit | fork
blame | history | raw | HEAD
Mach-O alignment fix
[nasm/avx512.git] / assemble.c
blob0277d19e9bd75d17397155de178563264cb0f44e
1 /* assemble.c code generation for the Netwide Assembler
2 *
3 * The Netwide Assembler is copyright (C) 1996 Simon Tatham and
4 * Julian Hall. All rights reserved. The software is
5 * redistributable under the license given in the file "LICENSE"
6 * distributed in the NASM archive.
7 *
8 * the actual codes (C syntax, i.e. octal):
9 * \0 - terminates the code. (Unless it's a literal of course.)
10 * \1..\4 - that many literal bytes follow in the code stream
11 * \5 - add 4 to the primary operand number (b, low octdigit)
12 * \6 - add 4 to the secondary operand number (a, middle octdigit)
13 * \7 - add 4 to both the primary and the secondary operand number
14 * \10..\13 - a literal byte follows in the code stream, to be added
15 * to the register value of operand 0..3
16 * \14..\17 - a signed byte immediate operand, from operand 0..3
17 * \20..\23 - a byte immediate operand, from operand 0..3
18 * \24..\27 - an unsigned byte immediate operand, from operand 0..3
19 * \30..\33 - a word immediate operand, from operand 0..3
20 * \34..\37 - select between \3[0-3] and \4[0-3] depending on 16/32 bit
21 * assembly mode or the operand-size override on the operand
22 * \40..\43 - a long immediate operand, from operand 0..3
23 * \44..\47 - select between \3[0-3], \4[0-3] and \5[4-7]
24 * depending on the address size of the instruction.
25 * \50..\53 - a byte relative operand, from operand 0..3
26 * \54..\57 - a qword immediate operand, from operand 0..3
27 * \60..\63 - a word relative operand, from operand 0..3
28 * \64..\67 - select between \6[0-3] and \7[0-3] depending on 16/32 bit
29 * assembly mode or the operand-size override on the operand
30 * \70..\73 - a long relative operand, from operand 0..3
31 * \74..\77 - a word constant, from the _segment_ part of operand 0..3
32 * \1ab - a ModRM, calculated on EA in operand a, with the spare
33 * field the register value of operand b.
34 * \140..\143 - an immediate word or signed byte for operand 0..3
35 * \144..\147 - or 2 (s-field) into opcode byte if operand 0..3
36 * is a signed byte rather than a word. Opcode byte follows.
37 * \150..\153 - an immediate dword or signed byte for operand 0..3
38 * \154..\157 - or 2 (s-field) into opcode byte if operand 0..3
39 * is a signed byte rather than a dword. Opcode byte follows.
40 * \160..\163 - this instruction uses DREX rather than REX, with the
41 * OC0 field set to 0, and the dest field taken from
42 * operand 0..3.
43 * \164..\167 - this instruction uses DREX rather than REX, with the
44 * OC0 field set to 1, and the dest field taken from
45 * operand 0..3.
46 * \171 - placement of DREX suffix in the absence of an EA
47 * \172\ab - the register number from operand a in bits 7..4, with
48 * the 4-bit immediate from operand b in bits 3..0.
49 * \173\xab - the register number from operand a in bits 7..4, with
50 * the value b in bits 3..0.
51 * \174\a - the register number from operand a in bits 7..4, and
52 * an arbitrary value in bits 3..0 (assembled as zero.)
53 * \2ab - a ModRM, calculated on EA in operand a, with the spare
54 * field equal to digit b.
55 * \250..\253 - same as \150..\153, except warn if the 64-bit operand
56 * is not equal to the truncated and sign-extended 32-bit
57 * operand; used for 32-bit immediates in 64-bit mode.
58 * \254..\257 - a signed 32-bit operand to be extended to 64 bits.
59 * \260..\263 - this instruction uses VEX rather than REX, with the
60 * V field taken from operand 0..3.
61 * \270 - this instruction uses VEX rather than REX, with the
62 * V field set to 1111b.
63 *
64 * VEX prefixes are followed by the sequence:
65 * \mm\wlp where mm is the M field; and wlp is:
66 * 00 0ww lpp
67 * [w0] ww = 0 for W = 0
68 * [w1] ww = 1 for W = 1
69 * [wx] ww = 2 for W don't care (always assembled as 0)
70 * [ww] ww = 3 for W used as REX.W
71 *
72 *
73 * \274..\277 - a signed byte immediate operand, from operand 0..3,
74 * which is to be extended to the operand size.
75 * \310 - indicates fixed 16-bit address size, i.e. optional 0x67.
76 * \311 - indicates fixed 32-bit address size, i.e. optional 0x67.
77 * \312 - (disassembler only) marker on LOOP, LOOPxx instructions.
78 * \313 - indicates fixed 64-bit address size, 0x67 invalid.
79 * \314 - (disassembler only) invalid with REX.B
80 * \315 - (disassembler only) invalid with REX.X
81 * \316 - (disassembler only) invalid with REX.R
82 * \317 - (disassembler only) invalid with REX.W
83 * \320 - indicates fixed 16-bit operand size, i.e. optional 0x66.
84 * \321 - indicates fixed 32-bit operand size, i.e. optional 0x66.
85 * \322 - indicates that this instruction is only valid when the
86 * operand size is the default (instruction to disassembler,
87 * generates no code in the assembler)
88 * \323 - indicates fixed 64-bit operand size, REX on extensions only.
89 * \324 - indicates 64-bit operand size requiring REX prefix.
90 * \330 - a literal byte follows in the code stream, to be added
91 * to the condition code value of the instruction.
92 * \331 - instruction not valid with REP prefix. Hint for
93 * disassembler only; for SSE instructions.
94 * \332 - REP prefix (0xF2 byte) used as opcode extension.
95 * \333 - REP prefix (0xF3 byte) used as opcode extension.
96 * \334 - LOCK prefix used instead of REX.R
97 * \335 - disassemble a rep (0xF3 byte) prefix as repe not rep.
98 * \336 - force a REP(E) prefix (0xF2) even if not specified.
99 * \337 - force a REPNE prefix (0xF3) even if not specified.
100 * \336-\337 are still listed as prefixes in the disassembler.
101 * \340 - reserve <operand 0> bytes of uninitialized storage.
102 * Operand 0 had better be a segmentless constant.
103 * \344,\345 - the PUSH/POP (respectively) codes for CS, DS, ES, SS
104 * (POP is never used for CS) depending on operand 0
105 * \346,\347 - the second byte of PUSH/POP codes for FS, GS, depending
106 * on operand 0
107 * \360 - no SSE prefix (== \364\331)
108 * \361 - 66 SSE prefix (== \366\331)
109 * \362 - F2 SSE prefix (== \364\332)
110 * \363 - F3 SSE prefix (== \364\333)
111 * \364 - operand-size prefix (0x66) not permitted
112 * \365 - address-size prefix (0x67) not permitted
113 * \366 - operand-size prefix (0x66) used as opcode extension
114 * \367 - address-size prefix (0x67) used as opcode extension
115 * \370,\371,\372 - match only if operand 0 meets byte jump criteria.
116 * 370 is used for Jcc, 371 is used for JMP.
117 * \373 - assemble 0x03 if bits==16, 0x05 if bits==32;
118 * used for conditional jump over longer jump
119 */
120
121 #include "compiler.h"
122
123 #include <stdio.h>
124 #include <string.h>
125 #include <inttypes.h>
126
127 #include "nasm.h"
128 #include "nasmlib.h"
129 #include "assemble.h"
130 #include "insns.h"
131 #include "tables.h"
132
133 /* Initialized to zero by the C standard */
134 static const uint8_t const_zero_buf[256];
135
136 typedef struct {
137 int sib_present; /* is a SIB byte necessary? */
138 int bytes; /* # of bytes of offset needed */
139 int size; /* lazy - this is sib+bytes+1 */
140 uint8_t modrm, sib, rex, rip; /* the bytes themselves */
141 } ea;
142
143 static uint32_t cpu; /* cpu level received from nasm.c */
144 static efunc errfunc;
145 static struct ofmt *outfmt;
146 static ListGen *list;
147
148 static int64_t calcsize(int32_t, int64_t, int, insn *, const uint8_t *);
149 static void gencode(int32_t segment, int64_t offset, int bits,
150 insn * ins, const struct itemplate *temp,
151 int64_t insn_end);
152 static int matches(const struct itemplate *, insn *, int bits);
153 static int32_t regflag(const operand *);
154 static int32_t regval(const operand *);
155 static int rexflags(int, int32_t, int);
156 static int op_rexflags(const operand *, int);
157 static ea *process_ea(operand *, ea *, int, int, int, int32_t);
158 static void add_asp(insn *, int);
159
160 static int has_prefix(insn * ins, enum prefix_pos pos, enum prefixes prefix)
161 {
162 return ins->prefixes[pos] == prefix;
163 }
164
165 static void assert_no_prefix(insn * ins, enum prefix_pos pos)
166 {
167 if (ins->prefixes[pos])
168 errfunc(ERR_NONFATAL, "invalid %s prefix",
169 prefix_name(ins->prefixes[pos]));
170 }
171
172 static const char *size_name(int size)
173 {
174 switch (size) {
175 case 1:
176 return "byte";
177 case 2:
178 return "word";
179 case 4:
180 return "dword";
181 case 8:
182 return "qword";
183 case 10:
184 return "tword";
185 case 16:
186 return "oword";
187 case 32:
188 return "yword";
189 default:
190 return "???";
191 }
192 }
193
194 static void warn_overflow(int size, const struct operand *o)
195 {
196 if (size < 8 && o->wrt == NO_SEG && o->segment == NO_SEG) {
197 int64_t lim = ((int64_t)1 << (size*8))-1;
198 int64_t data = o->offset;
199
200 if (data < ~lim || data > lim)
201 errfunc(ERR_WARNING | ERR_PASS2 | ERR_WARN_NOV,
202 "%s data exceeds bounds", size_name(size));
203 }
204 }
205 /*
206 * This routine wrappers the real output format's output routine,
207 * in order to pass a copy of the data off to the listing file
208 * generator at the same time.
209 */
210 static void out(int64_t offset, int32_t segto, const void *data,
211 enum out_type type, uint64_t size,
212 int32_t segment, int32_t wrt)
213 {
214 static int32_t lineno = 0; /* static!!! */
215 static char *lnfname = NULL;
216 uint8_t p[8];
217
218 if (type == OUT_ADDRESS && segment == NO_SEG && wrt == NO_SEG) {
219 /*
220 * This is a non-relocated address, and we're going to
221 * convert it into RAWDATA format.
222 */
223 uint8_t *q = p;
224
225 if (size > 8) {
226 errfunc(ERR_PANIC, "OUT_ADDRESS with size > 8");
227 return;
228 }
229
230 WRITEADDR(q, *(int64_t *)data, size);
231 data = p;
232 type = OUT_RAWDATA;
233 }
234
235 list->output(offset, data, type, size);
236
237 /*
238 * this call to src_get determines when we call the
239 * debug-format-specific "linenum" function
240 * it updates lineno and lnfname to the current values
241 * returning 0 if "same as last time", -2 if lnfname
242 * changed, and the amount by which lineno changed,
243 * if it did. thus, these variables must be static
244 */
245
246 if (src_get(&lineno, &lnfname)) {
247 outfmt->current_dfmt->linenum(lnfname, lineno, segto);
248 }
249
250 outfmt->output(segto, data, type, size, segment, wrt);
251 }
252
253 static bool jmp_match(int32_t segment, int64_t offset, int bits,
254 insn * ins, const uint8_t *code)
255 {
256 int64_t isize;
257 uint8_t c = code[0];
258
259 if ((c != 0370 && c != 0371) || (ins->oprs[0].type & STRICT))
260 return false;
261 if (!optimizing)
262 return false;
263 if (optimizing < 0 && c == 0371)
264 return false;
265
266 isize = calcsize(segment, offset, bits, ins, code);
267 if (ins->oprs[0].segment != segment)
268 return false;
269
270 isize = ins->oprs[0].offset - offset - isize; /* isize is delta */
271 return (isize >= -128 && isize <= 127); /* is it byte size? */
272 }
273
274 int64_t assemble(int32_t segment, int64_t offset, int bits, uint32_t cp,
275 insn * instruction, struct ofmt *output, efunc error,
276 ListGen * listgen)
277 {
278 const struct itemplate *temp;
279 int j;
280 int size_prob;
281 int64_t insn_end;
282 int32_t itimes;
283 int64_t start = offset;
284 int64_t wsize = 0; /* size for DB etc. */
285
286 errfunc = error; /* to pass to other functions */
287 cpu = cp;
288 outfmt = output; /* likewise */
289 list = listgen; /* and again */
290
291 switch (instruction->opcode) {
292 case -1:
293 return 0;
294 case I_DB:
295 wsize = 1;
296 break;
297 case I_DW:
298 wsize = 2;
299 break;
300 case I_DD:
301 wsize = 4;
302 break;
303 case I_DQ:
304 wsize = 8;
305 break;
306 case I_DT:
307 wsize = 10;
308 break;
309 case I_DO:
310 wsize = 16;
311 break;
312 case I_DY:
313 wsize = 32;
314 break;
315 default:
316 break;
317 }
318
319 if (wsize) {
320 extop *e;
321 int32_t t = instruction->times;
322 if (t < 0)
323 errfunc(ERR_PANIC,
324 "instruction->times < 0 (%ld) in assemble()", t);
325
326 while (t--) { /* repeat TIMES times */
327 for (e = instruction->eops; e; e = e->next) {
328 if (e->type == EOT_DB_NUMBER) {
329 if (wsize == 1) {
330 if (e->segment != NO_SEG)
331 errfunc(ERR_NONFATAL,
332 "one-byte relocation attempted");
333 else {
334 uint8_t out_byte = e->offset;
335 out(offset, segment, &out_byte,
336 OUT_RAWDATA, 1, NO_SEG, NO_SEG);
337 }
338 } else if (wsize > 8) {
339 errfunc(ERR_NONFATAL,
340 "integer supplied to a DT, DO or DY"
341 " instruction");
342 } else
343 out(offset, segment, &e->offset,
344 OUT_ADDRESS, wsize, e->segment, e->wrt);
345 offset += wsize;
346 } else if (e->type == EOT_DB_STRING ||
347 e->type == EOT_DB_STRING_FREE) {
348 int align;
349
350 out(offset, segment, e->stringval,
351 OUT_RAWDATA, e->stringlen, NO_SEG, NO_SEG);
352 align = e->stringlen % wsize;
353
354 if (align) {
355 align = wsize - align;
356 out(offset, segment, const_zero_buf,
357 OUT_RAWDATA, align, NO_SEG, NO_SEG);
358 }
359 offset += e->stringlen + align;
360 }
361 }
362 if (t > 0 && t == instruction->times - 1) {
363 /*
364 * Dummy call to list->output to give the offset to the
365 * listing module.
366 */
367 list->output(offset, NULL, OUT_RAWDATA, 0);
368 list->uplevel(LIST_TIMES);
369 }
370 }
371 if (instruction->times > 1)
372 list->downlevel(LIST_TIMES);
373 return offset - start;
374 }
375
376 if (instruction->opcode == I_INCBIN) {
377 const char *fname = instruction->eops->stringval;
378 FILE *fp;
379
380 fp = fopen(fname, "rb");
381 if (!fp) {
382 error(ERR_NONFATAL, "`incbin': unable to open file `%s'",
383 fname);
384 } else if (fseek(fp, 0L, SEEK_END) < 0) {
385 error(ERR_NONFATAL, "`incbin': unable to seek on file `%s'",
386 fname);
387 } else {
388 static char buf[4096];
389 size_t t = instruction->times;
390 size_t base = 0;
391 size_t len;
392
393 len = ftell(fp);
394 if (instruction->eops->next) {
395 base = instruction->eops->next->offset;
396 len -= base;
397 if (instruction->eops->next->next &&
398 len > (size_t)instruction->eops->next->next->offset)
399 len = (size_t)instruction->eops->next->next->offset;
400 }
401 /*
402 * Dummy call to list->output to give the offset to the
403 * listing module.
404 */
405 list->output(offset, NULL, OUT_RAWDATA, 0);
406 list->uplevel(LIST_INCBIN);
407 while (t--) {
408 size_t l;
409
410 fseek(fp, base, SEEK_SET);
411 l = len;
412 while (l > 0) {
413 int32_t m =
414 fread(buf, 1, (l > (int32_t) sizeof(buf) ? (int32_t) sizeof(buf) : l),
415 fp);
416 if (!m) {
417 /*
418 * This shouldn't happen unless the file
419 * actually changes while we are reading
420 * it.
421 */
422 error(ERR_NONFATAL,
423 "`incbin': unexpected EOF while"
424 " reading file `%s'", fname);
425 t = 0; /* Try to exit cleanly */
426 break;
427 }
428 out(offset, segment, buf, OUT_RAWDATA, m,
429 NO_SEG, NO_SEG);
430 l -= m;
431 }
432 }
433 list->downlevel(LIST_INCBIN);
434 if (instruction->times > 1) {
435 /*
436 * Dummy call to list->output to give the offset to the
437 * listing module.
438 */
439 list->output(offset, NULL, OUT_RAWDATA, 0);
440 list->uplevel(LIST_TIMES);
441 list->downlevel(LIST_TIMES);
442 }
443 fclose(fp);
444 return instruction->times * len;
445 }
446 return 0; /* if we're here, there's an error */
447 }
448
449 /* Check to see if we need an address-size prefix */
450 add_asp(instruction, bits);
451
452 size_prob = false;
453
454 for (temp = nasm_instructions[instruction->opcode]; temp->opcode != -1; temp++){
455 int m = matches(temp, instruction, bits);
456 if (m == 100 ||
457 (m == 99 && jmp_match(segment, offset, bits,
458 instruction, temp->code))) {
459 /* Matches! */
460 int64_t insn_size = calcsize(segment, offset, bits,
461 instruction, temp->code);
462 itimes = instruction->times;
463 if (insn_size < 0) /* shouldn't be, on pass two */
464 error(ERR_PANIC, "errors made it through from pass one");
465 else
466 while (itimes--) {
467 for (j = 0; j < MAXPREFIX; j++) {
468 uint8_t c = 0;
469 switch (instruction->prefixes[j]) {
470 case P_LOCK:
471 c = 0xF0;
472 break;
473 case P_REPNE:
474 case P_REPNZ:
475 c = 0xF2;
476 break;
477 case P_REPE:
478 case P_REPZ:
479 case P_REP:
480 c = 0xF3;
481 break;
482 case R_CS:
483 if (bits == 64) {
484 error(ERR_WARNING | ERR_PASS2,
485 "cs segment base generated, but will be ignored in 64-bit mode");
486 }
487 c = 0x2E;
488 break;
489 case R_DS:
490 if (bits == 64) {
491 error(ERR_WARNING | ERR_PASS2,
492 "ds segment base generated, but will be ignored in 64-bit mode");
493 }
494 c = 0x3E;
495 break;
496 case R_ES:
497 if (bits == 64) {
498 error(ERR_WARNING | ERR_PASS2,
499 "es segment base generated, but will be ignored in 64-bit mode");
500 }
501 c = 0x26;
502 break;
503 case R_FS:
504 c = 0x64;
505 break;
506 case R_GS:
507 c = 0x65;
508 break;
509 case R_SS:
510 if (bits == 64) {
511 error(ERR_WARNING | ERR_PASS2,
512 "ss segment base generated, but will be ignored in 64-bit mode");
513 }
514 c = 0x36;
515 break;
516 case R_SEGR6:
517 case R_SEGR7:
518 error(ERR_NONFATAL,
519 "segr6 and segr7 cannot be used as prefixes");
520 break;
521 case P_A16:
522 if (bits == 64) {
523 error(ERR_NONFATAL,
524 "16-bit addressing is not supported "
525 "in 64-bit mode");
526 } else if (bits != 16)
527 c = 0x67;
528 break;
529 case P_A32:
530 if (bits != 32)
531 c = 0x67;
532 break;
533 case P_A64:
534 if (bits != 64) {
535 error(ERR_NONFATAL,
536 "64-bit addressing is only supported "
537 "in 64-bit mode");
538 }
539 break;
540 case P_ASP:
541 c = 0x67;
542 break;
543 case P_O16:
544 if (bits != 16)
545 c = 0x66;
546 break;
547 case P_O32:
548 if (bits == 16)
549 c = 0x66;
550 break;
551 case P_O64:
552 /* REX.W */
553 break;
554 case P_OSP:
555 c = 0x66;
556 break;
557 case P_none:
558 break;
559 default:
560 error(ERR_PANIC, "invalid instruction prefix");
561 }
562 if (c != 0) {
563 out(offset, segment, &c, OUT_RAWDATA, 1,
564 NO_SEG, NO_SEG);
565 offset++;
566 }
567 }
568 insn_end = offset + insn_size;
569 gencode(segment, offset, bits, instruction,
570 temp, insn_end);
571 offset += insn_size;
572 if (itimes > 0 && itimes == instruction->times - 1) {
573 /*
574 * Dummy call to list->output to give the offset to the
575 * listing module.
576 */
577 list->output(offset, NULL, OUT_RAWDATA, 0);
578 list->uplevel(LIST_TIMES);
579 }
580 }
581 if (instruction->times > 1)
582 list->downlevel(LIST_TIMES);
583 return offset - start;
584 } else if (m > 0 && m > size_prob) {
585 size_prob = m;
586 }
587 }
588
589 if (temp->opcode == -1) { /* didn't match any instruction */
590 switch (size_prob) {
591 case 1:
592 error(ERR_NONFATAL, "operation size not specified");
593 break;
594 case 2:
595 error(ERR_NONFATAL, "mismatch in operand sizes");
596 break;
597 case 3:
598 error(ERR_NONFATAL, "no instruction for this cpu level");
599 break;
600 case 4:
601 error(ERR_NONFATAL, "instruction not supported in 64-bit mode");
602 break;
603 default:
604 error(ERR_NONFATAL,
605 "invalid combination of opcode and operands");
606 break;
607 }
608 }
609 return 0;
610 }
611
612 int64_t insn_size(int32_t segment, int64_t offset, int bits, uint32_t cp,
613 insn * instruction, efunc error)
614 {
615 const struct itemplate *temp;
616
617 errfunc = error; /* to pass to other functions */
618 cpu = cp;
619
620 if (instruction->opcode == -1)
621 return 0;
622
623 if (instruction->opcode == I_DB || instruction->opcode == I_DW ||
624 instruction->opcode == I_DD || instruction->opcode == I_DQ ||
625 instruction->opcode == I_DT || instruction->opcode == I_DO ||
626 instruction->opcode == I_DY) {
627 extop *e;
628 int32_t isize, osize, wsize = 0; /* placate gcc */
629
630 isize = 0;
631 switch (instruction->opcode) {
632 case I_DB:
633 wsize = 1;
634 break;
635 case I_DW:
636 wsize = 2;
637 break;
638 case I_DD:
639 wsize = 4;
640 break;
641 case I_DQ:
642 wsize = 8;
643 break;
644 case I_DT:
645 wsize = 10;
646 break;
647 case I_DO:
648 wsize = 16;
649 break;
650 case I_DY:
651 wsize = 32;
652 break;
653 default:
654 break;
655 }
656
657 for (e = instruction->eops; e; e = e->next) {
658 int32_t align;
659
660 osize = 0;
661 if (e->type == EOT_DB_NUMBER)
662 osize = 1;
663 else if (e->type == EOT_DB_STRING ||
664 e->type == EOT_DB_STRING_FREE)
665 osize = e->stringlen;
666
667 align = (-osize) % wsize;
668 if (align < 0)
669 align += wsize;
670 isize += osize + align;
671 }
672 return isize * instruction->times;
673 }
674
675 if (instruction->opcode == I_INCBIN) {
676 const char *fname = instruction->eops->stringval;
677 FILE *fp;
678 size_t len;
679
680 fp = fopen(fname, "rb");
681 if (!fp)
682 error(ERR_NONFATAL, "`incbin': unable to open file `%s'",
683 fname);
684 else if (fseek(fp, 0L, SEEK_END) < 0)
685 error(ERR_NONFATAL, "`incbin': unable to seek on file `%s'",
686 fname);
687 else {
688 len = ftell(fp);
689 fclose(fp);
690 if (instruction->eops->next) {
691 len -= instruction->eops->next->offset;
692 if (instruction->eops->next->next &&
693 len > (size_t)instruction->eops->next->next->offset) {
694 len = (size_t)instruction->eops->next->next->offset;
695 }
696 }
697 return instruction->times * len;
698 }
699 return 0; /* if we're here, there's an error */
700 }
701
702 /* Check to see if we need an address-size prefix */
703 add_asp(instruction, bits);
704
705 for (temp = nasm_instructions[instruction->opcode]; temp->opcode != -1; temp++) {
706 int m = matches(temp, instruction, bits);
707 if (m == 100 ||
708 (m == 99 && jmp_match(segment, offset, bits,
709 instruction, temp->code))) {
710 /* we've matched an instruction. */
711 int64_t isize;
712 const uint8_t *codes = temp->code;
713 int j;
714
715 isize = calcsize(segment, offset, bits, instruction, codes);
716 if (isize < 0)
717 return -1;
718 for (j = 0; j < MAXPREFIX; j++) {
719 switch (instruction->prefixes[j]) {
720 case P_A16:
721 if (bits != 16)
722 isize++;
723 break;
724 case P_A32:
725 if (bits != 32)
726 isize++;
727 break;
728 case P_O16:
729 if (bits != 16)
730 isize++;
731 break;
732 case P_O32:
733 if (bits == 16)
734 isize++;
735 break;
736 case P_A64:
737 case P_O64:
738 case P_none:
739 break;
740 default:
741 isize++;
742 break;
743 }
744 }
745 return isize * instruction->times;
746 }
747 }
748 return -1; /* didn't match any instruction */
749 }
750
751 static bool possible_sbyte(operand *o)
752 {
753 return o->wrt == NO_SEG && o->segment == NO_SEG &&
754 !(o->opflags & OPFLAG_FORWARD) &&
755 optimizing >= 0 && !(o->type & STRICT);
756 }
757
758 /* check that opn[op] is a signed byte of size 16 or 32 */
759 static bool is_sbyte16(operand *o)
760 {
761 int16_t v;
762
763 if (!possible_sbyte(o))
764 return false;
765
766 v = o->offset;
767 return v >= -128 && v <= 127;
768 }
769
770 static bool is_sbyte32(operand *o)
771 {
772 int32_t v;
773
774 if (!possible_sbyte(o))
775 return false;
776
777 v = o->offset;
778 return v >= -128 && v <= 127;
779 }
780
781 /* Common construct */
782 #define case4(x) case (x): case (x)+1: case (x)+2: case (x)+3
783
784 static int64_t calcsize(int32_t segment, int64_t offset, int bits,
785 insn * ins, const uint8_t *codes)
786 {
787 int64_t length = 0;
788 uint8_t c;
789 int rex_mask = ~0;
790 int op1, op2;
791 struct operand *opx;
792 uint8_t opex = 0;
793
794 ins->rex = 0; /* Ensure REX is reset */
795
796 if (ins->prefixes[PPS_OSIZE] == P_O64)
797 ins->rex |= REX_W;
798
799 (void)segment; /* Don't warn that this parameter is unused */
800 (void)offset; /* Don't warn that this parameter is unused */
801
802 while (*codes) {
803 c = *codes++;
804 op1 = (c & 3) + ((opex & 1) << 2);
805 op2 = ((c >> 3) & 3) + ((opex & 2) << 1);
806 opx = &ins->oprs[op1];
807 opex = 0; /* For the next iteration */
808
809 switch (c) {
810 case 01:
811 case 02:
812 case 03:
813 case 04:
814 codes += c, length += c;
815 break;
816
817 case 05:
818 case 06:
819 case 07:
820 opex = c;
821 break;
822
823 case4(010):
824 ins->rex |=
825 op_rexflags(opx, REX_B|REX_H|REX_P|REX_W);
826 codes++, length++;
827 break;
828
829 case4(014):
830 case4(020):
831 case4(024):
832 length++;
833 break;
834
835 case4(030):
836 length += 2;
837 break;
838
839 case4(034):
840 if (opx->type & (BITS16 | BITS32 | BITS64))
841 length += (opx->type & BITS16) ? 2 : 4;
842 else
843 length += (bits == 16) ? 2 : 4;
844 break;
845
846 case4(040):
847 length += 4;
848 break;
849
850 case4(044):
851 length += ins->addr_size >> 3;
852 break;
853
854 case4(050):
855 length++;
856 break;
857
858 case4(054):
859 length += 8; /* MOV reg64/imm */
860 break;
861
862 case4(060):
863 length += 2;
864 break;
865
866 case4(064):
867 if (opx->type & (BITS16 | BITS32 | BITS64))
868 length += (opx->type & BITS16) ? 2 : 4;
869 else
870 length += (bits == 16) ? 2 : 4;
871 break;
872
873 case4(070):
874 length += 4;
875 break;
876
877 case4(074):
878 length += 2;
879 break;
880
881 case4(0140):
882 length += is_sbyte16(opx) ? 1 : 2;
883 break;
884
885 case4(0144):
886 codes++;
887 length++;
888 break;
889
890 case4(0150):
891 length += is_sbyte32(opx) ? 1 : 4;
892 break;
893
894 case4(0154):
895 codes++;
896 length++;
897 break;
898
899 case4(0160):
900 length++;
901 ins->rex |= REX_D;
902 ins->drexdst = regval(opx);
903 break;
904
905 case4(0164):
906 length++;
907 ins->rex |= REX_D|REX_OC;
908 ins->drexdst = regval(opx);
909 break;
910
911 case 0171:
912 break;
913
914 case 0172:
915 case 0173:
916 case 0174:
917 codes++;
918 length++;
919 break;
920
921 case4(0250):
922 length += is_sbyte32(opx) ? 1 : 4;
923 break;
924
925 case4(0254):
926 length += 4;
927 break;
928
929 case4(0260):
930 ins->rex |= REX_V;
931 ins->drexdst = regval(opx);
932 ins->vex_m = *codes++;
933 ins->vex_wlp = *codes++;
934 break;
935
936 case 0270:
937 ins->rex |= REX_V;
938 ins->drexdst = 0;
939 ins->vex_m = *codes++;
940 ins->vex_wlp = *codes++;
941 break;
942
943 case4(0274):
944 length++;
945 break;
946
947 case4(0300):
948 break;
949
950 case 0310:
951 if (bits == 64)
952 return -1;
953 length += (bits != 16) && !has_prefix(ins, PPS_ASIZE, P_A16);
954 break;
955
956 case 0311:
957 length += (bits != 32) && !has_prefix(ins, PPS_ASIZE, P_A32);
958 break;
959
960 case 0312:
961 break;
962
963 case 0313:
964 if (bits != 64 || has_prefix(ins, PPS_ASIZE, P_A16) ||
965 has_prefix(ins, PPS_ASIZE, P_A32))
966 return -1;
967 break;
968
969 case4(0314):
970 break;
971
972 case 0320:
973 length += (bits != 16);
974 break;
975
976 case 0321:
977 length += (bits == 16);
978 break;
979
980 case 0322:
981 break;
982
983 case 0323:
984 rex_mask &= ~REX_W;
985 break;
986
987 case 0324:
988 ins->rex |= REX_W;
989 break;
990
991 case 0330:
992 codes++, length++;
993 break;
994
995 case 0331:
996 break;
997
998 case 0332:
999 case 0333:
1000 length++;
1001 break;
1002
1003 case 0334:
1004 ins->rex |= REX_L;
1005 break;
1006
1007 case 0335:
1008 break;
1009
1010 case 0336:
1011 if (!ins->prefixes[PPS_LREP])
1012 ins->prefixes[PPS_LREP] = P_REP;
1013 break;
1014
1015 case 0337:
1016 if (!ins->prefixes[PPS_LREP])
1017 ins->prefixes[PPS_LREP] = P_REPNE;
1018 break;
1019
1020 case 0340:
1021 if (ins->oprs[0].segment != NO_SEG)
1022 errfunc(ERR_NONFATAL, "attempt to reserve non-constant"
1023 " quantity of BSS space");
1024 else
1025 length += ins->oprs[0].offset;
1026 break;
1027
1028 case4(0344):
1029 length++;
1030 break;
1031
1032 case 0360:
1033 break;
1034
1035 case 0361:
1036 case 0362:
1037 case 0363:
1038 length++;
1039 break;
1040
1041 case 0364:
1042 case 0365:
1043 break;
1044
1045 case 0366:
1046 case 0367:
1047 length++;
1048 break;
1049
1050 case 0370:
1051 case 0371:
1052 case 0372:
1053 break;
1054
1055 case 0373:
1056 length++;
1057 break;
1058
1059 case4(0100):
1060 case4(0110):
1061 case4(0120):
1062 case4(0130):
1063 case4(0200):
1064 case4(0204):
1065 case4(0210):
1066 case4(0214):
1067 case4(0220):
1068 case4(0224):
1069 case4(0230):
1070 case4(0234):
1071 {
1072 ea ea_data;
1073 int rfield;
1074 int32_t rflags;
1075 struct operand *opy = &ins->oprs[op2];
1076
1077 ea_data.rex = 0; /* Ensure ea.REX is initially 0 */
1078
1079 if (c <= 0177) {
1080 /* pick rfield from operand b (opx) */
1081 rflags = regflag(opx);
1082 rfield = nasm_regvals[opx->basereg];
1083 } else {
1084 rflags = 0;
1085 rfield = c & 7;
1086 }
1087 if (!process_ea(opy, &ea_data, bits,
1088 ins->addr_size, rfield, rflags)) {
1089 errfunc(ERR_NONFATAL, "invalid effective address");
1090 return -1;
1091 } else {
1092 ins->rex |= ea_data.rex;
1093 length += ea_data.size;
1094 }
1095 }
1096 break;
1097
1098 default:
1099 errfunc(ERR_PANIC, "internal instruction table corrupt"
1100 ": instruction code 0x%02X given", c);
1101 break;
1102 }
1103 }
1104
1105 ins->rex &= rex_mask;
1106
1107 if (ins->rex & REX_V) {
1108 int bad32 = REX_R|REX_W|REX_X|REX_B;
1109
1110 if (ins->rex & REX_H) {
1111 errfunc(ERR_NONFATAL, "cannot use high register in vex instruction");
1112 return -1;
1113 }
1114 switch (ins->vex_wlp & 030) {
1115 case 000:
1116 case 020:
1117 ins->rex &= ~REX_W;
1118 break;
1119 case 010:
1120 ins->rex |= REX_W;
1121 bad32 &= ~REX_W;
1122 break;
1123 case 030:
1124 /* Follow REX_W */
1125 break;
1126 }
1127
1128 if (bits != 64 && ((ins->rex & bad32) || ins->drexdst > 7)) {
1129 errfunc(ERR_NONFATAL, "invalid operands in non-64-bit mode");
1130 return -1;
1131 }
1132 if (ins->vex_m != 1 || (ins->rex & (REX_W|REX_R|REX_B)))
1133 length += 3;
1134 else
1135 length += 2;
1136 } else if (ins->rex & REX_D) {
1137 if (ins->rex & REX_H) {
1138 errfunc(ERR_NONFATAL, "cannot use high register in drex instruction");
1139 return -1;
1140 }
1141 if (bits != 64 && ((ins->rex & (REX_R|REX_W|REX_X|REX_B)) ||
1142 ins->drexdst > 7)) {
1143 errfunc(ERR_NONFATAL, "invalid operands in non-64-bit mode");
1144 return -1;
1145 }
1146 length++;
1147 } else if (ins->rex & REX_REAL) {
1148 if (ins->rex & REX_H) {
1149 errfunc(ERR_NONFATAL, "cannot use high register in rex instruction");
1150 return -1;
1151 } else if (bits == 64) {
1152 length++;
1153 } else if ((ins->rex & REX_L) &&
1154 !(ins->rex & (REX_P|REX_W|REX_X|REX_B)) &&
1155 cpu >= IF_X86_64) {
1156 /* LOCK-as-REX.R */
1157 assert_no_prefix(ins, PPS_LREP);
1158 length++;
1159 } else {
1160 errfunc(ERR_NONFATAL, "invalid operands in non-64-bit mode");
1161 return -1;
1162 }
1163 }
1164
1165 return length;
1166 }
1167
1168 #define EMIT_REX() \
1169 if (!(ins->rex & (REX_D|REX_V)) && (ins->rex & REX_REAL) && (bits == 64)) { \
1170 ins->rex = (ins->rex & REX_REAL)|REX_P; \
1171 out(offset, segment, &ins->rex, OUT_RAWDATA, 1, NO_SEG, NO_SEG); \
1172 ins->rex = 0; \
1173 offset += 1; \
1174 }
1175
1176 static void gencode(int32_t segment, int64_t offset, int bits,
1177 insn * ins, const struct itemplate *temp,
1178 int64_t insn_end)
1179 {
1180 static char condval[] = { /* conditional opcodes */
1181 0x7, 0x3, 0x2, 0x6, 0x2, 0x4, 0xF, 0xD, 0xC, 0xE, 0x6, 0x2,
1182 0x3, 0x7, 0x3, 0x5, 0xE, 0xC, 0xD, 0xF, 0x1, 0xB, 0x9, 0x5,
1183 0x0, 0xA, 0xA, 0xB, 0x8, 0x4
1184 };
1185 uint8_t c;
1186 uint8_t bytes[4];
1187 int64_t size;
1188 int64_t data;
1189 int op1, op2;
1190 struct operand *opx;
1191 const uint8_t *codes = temp->code;
1192 uint8_t opex = 0;
1193
1194 while (*codes) {
1195 c = *codes++;
1196 op1 = (c & 3) + ((opex & 1) << 2);
1197 op2 = ((c >> 3) & 3) + ((opex & 2) << 1);
1198 opx = &ins->oprs[op1];
1199 opex = 0; /* For the next iteration */
1200
1201 switch (c) {
1202 case 01:
1203 case 02:
1204 case 03:
1205 case 04:
1206 EMIT_REX();
1207 out(offset, segment, codes, OUT_RAWDATA, c, NO_SEG, NO_SEG);
1208 codes += c;
1209 offset += c;
1210 break;
1211
1212 case 05:
1213 case 06:
1214 case 07:
1215 opex = c;
1216 break;
1217
1218 case4(010):
1219 EMIT_REX();
1220 bytes[0] = *codes++ + (regval(opx) & 7);
1221 out(offset, segment, bytes, OUT_RAWDATA, 1, NO_SEG, NO_SEG);
1222 offset += 1;
1223 break;
1224
1225 case4(014):
1226 /* The test for BITS8 and SBYTE here is intended to avoid
1227 warning on optimizer actions due to SBYTE, while still
1228 warn on explicit BYTE directives. Also warn, obviously,
1229 if the optimizer isn't enabled. */
1230 if (((opx->type & BITS8) ||
1231 !(opx->type & temp->opd[op1] & BYTENESS)) &&
1232 (opx->offset < -128 || opx->offset > 127)) {
1233 errfunc(ERR_WARNING | ERR_PASS2 | ERR_WARN_NOV,
1234 "signed byte value exceeds bounds");
1235 }
1236 if (opx->segment != NO_SEG) {
1237 data = opx->offset;
1238 out(offset, segment, &data, OUT_ADDRESS, 1,
1239 opx->segment, opx->wrt);
1240 } else {
1241 bytes[0] = opx->offset;
1242 out(offset, segment, bytes, OUT_RAWDATA, 1, NO_SEG,
1243 NO_SEG);
1244 }
1245 offset += 1;
1246 break;
1247
1248 case4(020):
1249 if (opx->offset < -256 || opx->offset > 255) {
1250 errfunc(ERR_WARNING | ERR_PASS2 | ERR_WARN_NOV,
1251 "byte value exceeds bounds");
1252 }
1253 if (opx->segment != NO_SEG) {
1254 data = opx->offset;
1255 out(offset, segment, &data, OUT_ADDRESS, 1,
1256 opx->segment, opx->wrt);
1257 } else {
1258 bytes[0] = opx->offset;
1259 out(offset, segment, bytes, OUT_RAWDATA, 1, NO_SEG,
1260 NO_SEG);
1261 }
1262 offset += 1;
1263 break;
1264
1265 case4(024):
1266 if (opx->offset < 0 || opx->offset > 255)
1267 errfunc(ERR_WARNING | ERR_PASS2 | ERR_WARN_NOV,
1268 "unsigned byte value exceeds bounds");
1269 if (opx->segment != NO_SEG) {
1270 data = opx->offset;
1271 out(offset, segment, &data, OUT_ADDRESS, 1,
1272 opx->segment, opx->wrt);
1273 } else {
1274 bytes[0] = opx->offset;
1275 out(offset, segment, bytes, OUT_RAWDATA, 1, NO_SEG,
1276 NO_SEG);
1277 }
1278 offset += 1;
1279 break;
1280
1281 case4(030):
1282 warn_overflow(2, opx);
1283 data = opx->offset;
1284 out(offset, segment, &data, OUT_ADDRESS, 2,
1285 opx->segment, opx->wrt);
1286 offset += 2;
1287 break;
1288
1289 case4(034):
1290 if (opx->type & (BITS16 | BITS32))
1291 size = (opx->type & BITS16) ? 2 : 4;
1292 else
1293 size = (bits == 16) ? 2 : 4;
1294 warn_overflow(size, opx);
1295 data = opx->offset;
1296 out(offset, segment, &data, OUT_ADDRESS, size,
1297 opx->segment, opx->wrt);
1298 offset += size;
1299 break;
1300
1301 case4(040):
1302 warn_overflow(4, opx);
1303 data = opx->offset;
1304 out(offset, segment, &data, OUT_ADDRESS, 4,
1305 opx->segment, opx->wrt);
1306 offset += 4;
1307 break;
1308
1309 case4(044):
1310 data = opx->offset;
1311 size = ins->addr_size >> 3;
1312 warn_overflow(size, opx);
1313 out(offset, segment, &data, OUT_ADDRESS, size,
1314 opx->segment, opx->wrt);
1315 offset += size;
1316 break;
1317
1318 case4(050):
1319 if (opx->segment != segment)
1320 errfunc(ERR_NONFATAL,
1321 "short relative jump outside segment");
1322 data = opx->offset - insn_end;
1323 if (data > 127 || data < -128)
1324 errfunc(ERR_NONFATAL, "short jump is out of range");
1325 bytes[0] = data;
1326 out(offset, segment, bytes, OUT_RAWDATA, 1, NO_SEG, NO_SEG);
1327 offset += 1;
1328 break;
1329
1330 case4(054):
1331 data = (int64_t)opx->offset;
1332 out(offset, segment, &data, OUT_ADDRESS, 8,
1333 opx->segment, opx->wrt);
1334 offset += 8;
1335 break;
1336
1337 case4(060):
1338 if (opx->segment != segment) {
1339 data = opx->offset;
1340 out(offset, segment, &data,
1341 OUT_REL2ADR, insn_end - offset,
1342 opx->segment, opx->wrt);
1343 } else {
1344 data = opx->offset - insn_end;
1345 out(offset, segment, &data,
1346 OUT_ADDRESS, 2, NO_SEG, NO_SEG);
1347 }
1348 offset += 2;
1349 break;
1350
1351 case4(064):
1352 if (opx->type & (BITS16 | BITS32 | BITS64))
1353 size = (opx->type & BITS16) ? 2 : 4;
1354 else
1355 size = (bits == 16) ? 2 : 4;
1356 if (opx->segment != segment) {
1357 data = opx->offset;
1358 out(offset, segment, &data,
1359 size == 2 ? OUT_REL2ADR : OUT_REL4ADR,
1360 insn_end - offset, opx->segment, opx->wrt);
1361 } else {
1362 data = opx->offset - insn_end;
1363 out(offset, segment, &data,
1364 OUT_ADDRESS, size, NO_SEG, NO_SEG);
1365 }
1366 offset += size;
1367 break;
1368
1369 case4(070):
1370 if (opx->segment != segment) {
1371 data = opx->offset;
1372 out(offset, segment, &data,
1373 OUT_REL4ADR, insn_end - offset,
1374 opx->segment, opx->wrt);
1375 } else {
1376 data = opx->offset - insn_end;
1377 out(offset, segment, &data,
1378 OUT_ADDRESS, 4, NO_SEG, NO_SEG);
1379 }
1380 offset += 4;
1381 break;
1382
1383 case4(074):
1384 if (opx->segment == NO_SEG)
1385 errfunc(ERR_NONFATAL, "value referenced by FAR is not"
1386 " relocatable");
1387 data = 0;
1388 out(offset, segment, &data, OUT_ADDRESS, 2,
1389 outfmt->segbase(1 + opx->segment),
1390 opx->wrt);
1391 offset += 2;
1392 break;
1393
1394 case4(0140):
1395 data = opx->offset;
1396 warn_overflow(2, opx);
1397 if (is_sbyte16(opx)) {
1398 bytes[0] = data;
1399 out(offset, segment, bytes, OUT_RAWDATA, 1, NO_SEG,
1400 NO_SEG);
1401 offset++;
1402 } else {
1403 out(offset, segment, &data, OUT_ADDRESS, 2,
1404 opx->segment, opx->wrt);
1405 offset += 2;
1406 }
1407 break;
1408
1409 case4(0144):
1410 EMIT_REX();
1411 bytes[0] = *codes++;
1412 if (is_sbyte16(opx))
1413 bytes[0] |= 2; /* s-bit */
1414 out(offset, segment, bytes, OUT_RAWDATA, 1, NO_SEG, NO_SEG);
1415 offset++;
1416 break;
1417
1418 case4(0150):
1419 data = opx->offset;
1420 warn_overflow(4, opx);
1421 if (is_sbyte32(opx)) {
1422 bytes[0] = data;
1423 out(offset, segment, bytes, OUT_RAWDATA, 1, NO_SEG,
1424 NO_SEG);
1425 offset++;
1426 } else {
1427 out(offset, segment, &data, OUT_ADDRESS, 4,
1428 opx->segment, opx->wrt);
1429 offset += 4;
1430 }
1431 break;
1432
1433 case4(0154):
1434 EMIT_REX();
1435 bytes[0] = *codes++;
1436 if (is_sbyte32(opx))
1437 bytes[0] |= 2; /* s-bit */
1438 out(offset, segment, bytes, OUT_RAWDATA, 1, NO_SEG, NO_SEG);
1439 offset++;
1440 break;
1441
1442 case4(0160):
1443 case4(0164):
1444 break;
1445
1446 case 0171:
1447 bytes[0] =
1448 (ins->drexdst << 4) |
1449 (ins->rex & REX_OC ? 0x08 : 0) |
1450 (ins->rex & (REX_R|REX_X|REX_B));
1451 ins->rex = 0;
1452 out(offset, segment, bytes, OUT_RAWDATA, 1, NO_SEG, NO_SEG);
1453 offset++;
1454 break;
1455
1456 case 0172:
1457 c = *codes++;
1458 opx = &ins->oprs[c >> 3];
1459 bytes[0] = nasm_regvals[opx->basereg] << 4;
1460 opx = &ins->oprs[c & 7];
1461 if (opx->segment != NO_SEG || opx->wrt != NO_SEG) {
1462 errfunc(ERR_NONFATAL,
1463 "non-absolute expression not permitted as argument %d",
1464 c & 7);
1465 } else {
1466 if (opx->offset & ~15) {
1467 errfunc(ERR_WARNING | ERR_PASS2 | ERR_WARN_NOV,
1468 "four-bit argument exceeds bounds");
1469 }
1470 bytes[0] |= opx->offset & 15;
1471 }
1472 out(offset, segment, bytes, OUT_RAWDATA, 1, NO_SEG, NO_SEG);
1473 offset++;
1474 break;
1475
1476 case 0173:
1477 c = *codes++;
1478 opx = &ins->oprs[c >> 4];
1479 bytes[0] = nasm_regvals[opx->basereg] << 4;
1480 bytes[0] |= c & 15;
1481 out(offset, segment, bytes, OUT_RAWDATA, 1, NO_SEG, NO_SEG);
1482 offset++;
1483 break;
1484
1485 case 0174:
1486 c = *codes++;
1487 opx = &ins->oprs[c];
1488 bytes[0] = nasm_regvals[opx->basereg] << 4;
1489 out(offset, segment, bytes, OUT_RAWDATA, 1, NO_SEG, NO_SEG);
1490 offset++;
1491 break;
1492
1493 case4(0250):
1494 data = opx->offset;
1495 if (opx->wrt == NO_SEG && opx->segment == NO_SEG &&
1496 (int32_t)data != (int64_t)data) {
1497 errfunc(ERR_WARNING | ERR_PASS2 | ERR_WARN_NOV,
1498 "signed dword immediate exceeds bounds");
1499 }
1500 if (is_sbyte32(opx)) {
1501 bytes[0] = data;
1502 out(offset, segment, bytes, OUT_RAWDATA, 1, NO_SEG,
1503 NO_SEG);
1504 offset++;
1505 } else {
1506 out(offset, segment, &data, OUT_ADDRESS, 4,
1507 opx->segment, opx->wrt);
1508 offset += 4;
1509 }
1510 break;
1511
1512 case4(0254):
1513 data = opx->offset;
1514 if (opx->wrt == NO_SEG && opx->segment == NO_SEG &&
1515 (int32_t)data != (int64_t)data) {
1516 errfunc(ERR_WARNING | ERR_PASS2 | ERR_WARN_NOV,
1517 "signed dword immediate exceeds bounds");
1518 }
1519 out(offset, segment, &data, OUT_ADDRESS, 4,
1520 opx->segment, opx->wrt);
1521 offset += 4;
1522 break;
1523
1524 case4(0260):
1525 case 0270:
1526 codes += 2;
1527 if (ins->vex_m != 1 || (ins->rex & (REX_W|REX_X|REX_B))) {
1528 bytes[0] = 0xc4;
1529 bytes[1] = ins->vex_m | ((~ins->rex & 7) << 5);
1530 bytes[2] = ((ins->rex & REX_W) << (7-3)) |
1531 ((~ins->drexdst & 15)<< 3) | (ins->vex_wlp & 07);
1532 out(offset, segment, &bytes, OUT_RAWDATA, 3, NO_SEG, NO_SEG);
1533 offset += 3;
1534 } else {
1535 bytes[0] = 0xc5;
1536 bytes[1] = ((~ins->rex & REX_R) << (7-2)) |
1537 ((~ins->drexdst & 15) << 3) | (ins->vex_wlp & 07);
1538 out(offset, segment, &bytes, OUT_RAWDATA, 2, NO_SEG, NO_SEG);
1539 offset += 2;
1540 }
1541 break;
1542
1543 case4(0274):
1544 {
1545 uint64_t uv, um;
1546 int s;
1547
1548 if (ins->rex & REX_W)
1549 s = 64;
1550 else if (ins->prefixes[PPS_OSIZE] == P_O16)
1551 s = 16;
1552 else if (ins->prefixes[PPS_OSIZE] == P_O32)
1553 s = 32;
1554 else
1555 s = bits;
1556
1557 um = (uint64_t)2 << (s-1);
1558 uv = opx->offset;
1559
1560 if (uv > 127 && uv < (uint64_t)-128 &&
1561 (uv < um-128 || uv > um-1)) {
1562 errfunc(ERR_WARNING | ERR_PASS2 | ERR_WARN_NOV,
1563 "signed byte value exceeds bounds");
1564 }
1565 if (opx->segment != NO_SEG) {
1566 data = uv;
1567 out(offset, segment, &data, OUT_ADDRESS, 1,
1568 opx->segment, opx->wrt);
1569 } else {
1570 bytes[0] = uv;
1571 out(offset, segment, bytes, OUT_RAWDATA, 1, NO_SEG,
1572 NO_SEG);
1573 }
1574 offset += 1;
1575 break;
1576 }
1577
1578 case4(0300):
1579 break;
1580
1581 case 0310:
1582 if (bits == 32 && !has_prefix(ins, PPS_ASIZE, P_A16)) {
1583 *bytes = 0x67;
1584 out(offset, segment, bytes, OUT_RAWDATA, 1, NO_SEG, NO_SEG);
1585 offset += 1;
1586 } else
1587 offset += 0;
1588 break;
1589
1590 case 0311:
1591 if (bits != 32 && !has_prefix(ins, PPS_ASIZE, P_A32)) {
1592 *bytes = 0x67;
1593 out(offset, segment, bytes, OUT_RAWDATA, 1, NO_SEG, NO_SEG);
1594 offset += 1;
1595 } else
1596 offset += 0;
1597 break;
1598
1599 case 0312:
1600 break;
1601
1602 case 0313:
1603 ins->rex = 0;
1604 break;
1605
1606 case4(0314):
1607 break;
1608
1609 case 0320:
1610 if (bits != 16) {
1611 *bytes = 0x66;
1612 out(offset, segment, bytes, OUT_RAWDATA, 1, NO_SEG, NO_SEG);
1613 offset += 1;
1614 } else
1615 offset += 0;
1616 break;
1617
1618 case 0321:
1619 if (bits == 16) {
1620 *bytes = 0x66;
1621 out(offset, segment, bytes, OUT_RAWDATA, 1, NO_SEG, NO_SEG);
1622 offset += 1;
1623 } else
1624 offset += 0;
1625 break;
1626
1627 case 0322:
1628 case 0323:
1629 break;
1630
1631 case 0324:
1632 ins->rex |= REX_W;
1633 break;
1634
1635 case 0330:
1636 *bytes = *codes++ ^ condval[ins->condition];
1637 out(offset, segment, bytes, OUT_RAWDATA, 1, NO_SEG, NO_SEG);
1638 offset += 1;
1639 break;
1640
1641 case 0331:
1642 break;
1643
1644 case 0332:
1645 case 0333:
1646 *bytes = c - 0332 + 0xF2;
1647 out(offset, segment, bytes, OUT_RAWDATA, 1, NO_SEG, NO_SEG);
1648 offset += 1;
1649 break;
1650
1651 case 0334:
1652 if (ins->rex & REX_R) {
1653 *bytes = 0xF0;
1654 out(offset, segment, bytes, OUT_RAWDATA, 1, NO_SEG, NO_SEG);
1655 offset += 1;
1656 }
1657 ins->rex &= ~(REX_L|REX_R);
1658 break;
1659
1660 case 0335:
1661 break;
1662
1663 case 0336:
1664 case 0337:
1665 break;
1666
1667 case 0340:
1668 if (ins->oprs[0].segment != NO_SEG)
1669 errfunc(ERR_PANIC, "non-constant BSS size in pass two");
1670 else {
1671 int64_t size = ins->oprs[0].offset;
1672 if (size > 0)
1673 out(offset, segment, NULL,
1674 OUT_RESERVE, size, NO_SEG, NO_SEG);
1675 offset += size;
1676 }
1677 break;
1678
1679 case 0344:
1680 case 0345:
1681 bytes[0] = c & 1;
1682 switch (ins->oprs[0].basereg) {
1683 case R_CS:
1684 bytes[0] += 0x0E;
1685 break;
1686 case R_DS:
1687 bytes[0] += 0x1E;
1688 break;
1689 case R_ES:
1690 bytes[0] += 0x06;
1691 break;
1692 case R_SS:
1693 bytes[0] += 0x16;
1694 break;
1695 default:
1696 errfunc(ERR_PANIC,
1697 "bizarre 8086 segment register received");
1698 }
1699 out(offset, segment, bytes, OUT_RAWDATA, 1, NO_SEG, NO_SEG);
1700 offset++;
1701 break;
1702
1703 case 0346:
1704 case 0347:
1705 bytes[0] = c & 1;
1706 switch (ins->oprs[0].basereg) {
1707 case R_FS:
1708 bytes[0] += 0xA0;
1709 break;
1710 case R_GS:
1711 bytes[0] += 0xA8;
1712 break;
1713 default:
1714 errfunc(ERR_PANIC,
1715 "bizarre 386 segment register received");
1716 }
1717 out(offset, segment, bytes, OUT_RAWDATA, 1, NO_SEG, NO_SEG);
1718 offset++;
1719 break;
1720
1721 case 0360:
1722 break;
1723
1724 case 0361:
1725 bytes[0] = 0x66;
1726 out(offset, segment, bytes, OUT_RAWDATA, 1, NO_SEG, NO_SEG);
1727 offset += 1;
1728 break;
1729
1730 case 0362:
1731 case 0363:
1732 bytes[0] = c - 0362 + 0xf2;
1733 out(offset, segment, bytes, OUT_RAWDATA, 1, NO_SEG, NO_SEG);
1734 offset += 1;
1735 break;
1736
1737 case 0364:
1738 case 0365:
1739 break;
1740
1741 case 0366:
1742 case 0367:
1743 *bytes = c - 0366 + 0x66;
1744 out(offset, segment, bytes, OUT_RAWDATA, 1, NO_SEG, NO_SEG);
1745 offset += 1;
1746 break;
1747
1748 case 0370:
1749 case 0371:
1750 case 0372:
1751 break;
1752
1753 case 0373:
1754 *bytes = bits == 16 ? 3 : 5;
1755 out(offset, segment, bytes, OUT_RAWDATA, 1, NO_SEG, NO_SEG);
1756 offset += 1;
1757 break;
1758
1759 case4(0100):
1760 case4(0110):
1761 case4(0120):
1762 case4(0130):
1763 case4(0200):
1764 case4(0204):
1765 case4(0210):
1766 case4(0214):
1767 case4(0220):
1768 case4(0224):
1769 case4(0230):
1770 case4(0234):
1771 {
1772 ea ea_data;
1773 int rfield;
1774 int32_t rflags;
1775 uint8_t *p;
1776 int32_t s;
1777 enum out_type type;
1778 struct operand *opy = &ins->oprs[op2];
1779
1780 if (c <= 0177) {
1781 /* pick rfield from operand b (opx) */
1782 rflags = regflag(opx);
1783 rfield = nasm_regvals[opx->basereg];
1784 } else {
1785 /* rfield is constant */
1786 rflags = 0;
1787 rfield = c & 7;
1788 }
1789
1790 if (!process_ea(opy, &ea_data, bits, ins->addr_size,
1791 rfield, rflags)) {
1792 errfunc(ERR_NONFATAL, "invalid effective address");
1793 }
1794
1795
1796 p = bytes;
1797 *p++ = ea_data.modrm;
1798 if (ea_data.sib_present)
1799 *p++ = ea_data.sib;
1800
1801 /* DREX suffixes come between the SIB and the displacement */
1802 if (ins->rex & REX_D) {
1803 *p++ = (ins->drexdst << 4) |
1804 (ins->rex & REX_OC ? 0x08 : 0) |
1805 (ins->rex & (REX_R|REX_X|REX_B));
1806 ins->rex = 0;
1807 }
1808
1809 s = p - bytes;
1810 out(offset, segment, bytes, OUT_RAWDATA, s, NO_SEG, NO_SEG);
1811
1812 /*
1813 * Make sure the address gets the right offset in case
1814 * the line breaks in the .lst file (BR 1197827)
1815 */
1816 offset += s;
1817 s = 0;
1818
1819 switch (ea_data.bytes) {
1820 case 0:
1821 break;
1822 case 1:
1823 case 2:
1824 case 4:
1825 case 8:
1826 data = opy->offset;
1827 warn_overflow(ea_data.bytes, opy);
1828 s += ea_data.bytes;
1829 if (ea_data.rip) {
1830 if (opy->segment == segment) {
1831 data -= insn_end;
1832 out(offset, segment, &data, OUT_ADDRESS,
1833 ea_data.bytes, NO_SEG, NO_SEG);
1834 } else {
1835 out(offset, segment, &data, OUT_REL4ADR,
1836 insn_end - offset, opy->segment, opy->wrt);
1837 }
1838 } else {
1839 type = OUT_ADDRESS;
1840 out(offset, segment, &data, OUT_ADDRESS,
1841 ea_data.bytes, opy->segment, opy->wrt);
1842 }
1843 break;
1844 default:
1845 /* Impossible! */
1846 errfunc(ERR_PANIC,
1847 "Invalid amount of bytes (%d) for offset?!",
1848 ea_data.bytes);
1849 break;
1850 }
1851 offset += s;
1852 }
1853 break;
1854
1855 default:
1856 errfunc(ERR_PANIC, "internal instruction table corrupt"
1857 ": instruction code 0x%02X given", c);
1858 break;
1859 }
1860 }
1861 }
1862
1863 static int32_t regflag(const operand * o)
1864 {
1865 if (o->basereg < EXPR_REG_START || o->basereg >= REG_ENUM_LIMIT) {
1866 errfunc(ERR_PANIC, "invalid operand passed to regflag()");
1867 }
1868 return nasm_reg_flags[o->basereg];
1869 }
1870
1871 static int32_t regval(const operand * o)
1872 {
1873 if (o->basereg < EXPR_REG_START || o->basereg >= REG_ENUM_LIMIT) {
1874 errfunc(ERR_PANIC, "invalid operand passed to regval()");
1875 }
1876 return nasm_regvals[o->basereg];
1877 }
1878
1879 static int op_rexflags(const operand * o, int mask)
1880 {
1881 int32_t flags;
1882 int val;
1883
1884 if (o->basereg < EXPR_REG_START || o->basereg >= REG_ENUM_LIMIT) {
1885 errfunc(ERR_PANIC, "invalid operand passed to op_rexflags()");
1886 }
1887
1888 flags = nasm_reg_flags[o->basereg];
1889 val = nasm_regvals[o->basereg];
1890
1891 return rexflags(val, flags, mask);
1892 }
1893
1894 static int rexflags(int val, int32_t flags, int mask)
1895 {
1896 int rex = 0;
1897
1898 if (val >= 8)
1899 rex |= REX_B|REX_X|REX_R;
1900 if (flags & BITS64)
1901 rex |= REX_W;
1902 if (!(REG_HIGH & ~flags)) /* AH, CH, DH, BH */
1903 rex |= REX_H;
1904 else if (!(REG8 & ~flags) && val >= 4) /* SPL, BPL, SIL, DIL */
1905 rex |= REX_P;
1906
1907 return rex & mask;
1908 }
1909
1910 static int matches(const struct itemplate *itemp, insn * instruction, int bits)
1911 {
1912 int i, size[MAX_OPERANDS], asize, oprs, ret;
1913
1914 ret = 100;
1915
1916 /*
1917 * Check the opcode
1918 */
1919 if (itemp->opcode != instruction->opcode)
1920 return 0;
1921
1922 /*
1923 * Count the operands
1924 */
1925 if (itemp->operands != instruction->operands)
1926 return 0;
1927
1928 /*
1929 * Check that no spurious colons or TOs are present
1930 */
1931 for (i = 0; i < itemp->operands; i++)
1932 if (instruction->oprs[i].type & ~itemp->opd[i] & (COLON | TO))
1933 return 0;
1934
1935 /*
1936 * Process size flags
1937 */
1938 if (itemp->flags & IF_ARMASK) {
1939 memset(size, 0, sizeof size);
1940
1941 i = ((itemp->flags & IF_ARMASK) >> IF_ARSHFT) - 1;
1942
1943 switch (itemp->flags & IF_SMASK) {
1944 case IF_SB:
1945 size[i] = BITS8;
1946 break;
1947 case IF_SW:
1948 size[i] = BITS16;
1949 break;
1950 case IF_SD:
1951 size[i] = BITS32;
1952 break;
1953 case IF_SQ:
1954 size[i] = BITS64;
1955 break;
1956 case IF_SO:
1957 size[i] = BITS128;
1958 break;
1959 case IF_SY:
1960 size[i] = BITS256;
1961 break;
1962 case IF_SZ:
1963 switch (bits) {
1964 case 16:
1965 size[i] = BITS16;
1966 break;
1967 case 32:
1968 size[i] = BITS32;
1969 break;
1970 case 64:
1971 size[i] = BITS64;
1972 break;
1973 }
1974 break;
1975 default:
1976 break;
1977 }
1978 } else {
1979 asize = 0;
1980 switch (itemp->flags & IF_SMASK) {
1981 case IF_SB:
1982 asize = BITS8;
1983 break;
1984 case IF_SW:
1985 asize = BITS16;
1986 break;
1987 case IF_SD:
1988 asize = BITS32;
1989 break;
1990 case IF_SQ:
1991 asize = BITS64;
1992 break;
1993 case IF_SO:
1994 asize = BITS128;
1995 break;
1996 case IF_SY:
1997 asize = BITS256;
1998 break;
1999 case IF_SZ:
2000 switch (bits) {
2001 case 16:
2002 asize = BITS16;
2003 break;
2004 case 32:
2005 asize = BITS32;
2006 break;
2007 case 64:
2008 asize = BITS64;
2009 break;
2010 }
2011 break;
2012 default:
2013 break;
2014 }
2015 for (i = 0; i < MAX_OPERANDS; i++)
2016 size[i] = asize;
2017 }
2018
2019 /*
2020 * Check that the operand flags all match up
2021 */
2022 for (i = 0; i < itemp->operands; i++) {
2023 int32_t type = instruction->oprs[i].type;
2024 if (!(type & SIZE_MASK))
2025 type |= size[i];
2026
2027 if (itemp->opd[i] & SAME_AS) {
2028 int j = itemp->opd[i] & ~SAME_AS;
2029 if (type != instruction->oprs[j].type ||
2030 instruction->oprs[i].basereg != instruction->oprs[j].basereg)
2031 return 0;
2032 } else if (itemp->opd[i] & ~type ||
2033 ((itemp->opd[i] & SIZE_MASK) &&
2034 ((itemp->opd[i] ^ type) & SIZE_MASK))) {
2035 if ((itemp->opd[i] & ~type & ~SIZE_MASK) ||
2036 (type & SIZE_MASK))
2037 return 0;
2038 else
2039 return 1;
2040 }
2041 }
2042
2043 /*
2044 * Check operand sizes
2045 */
2046 if (itemp->flags & (IF_SM | IF_SM2)) {
2047 oprs = (itemp->flags & IF_SM2 ? 2 : itemp->operands);
2048 asize = 0;
2049 for (i = 0; i < oprs; i++) {
2050 if ((asize = itemp->opd[i] & SIZE_MASK) != 0) {
2051 int j;
2052 for (j = 0; j < oprs; j++)
2053 size[j] = asize;
2054 break;
2055 }
2056 }
2057 } else {
2058 oprs = itemp->operands;
2059 }
2060
2061 for (i = 0; i < itemp->operands; i++) {
2062 if (!(itemp->opd[i] & SIZE_MASK) &&
2063 (instruction->oprs[i].type & SIZE_MASK & ~size[i]))
2064 return 2;
2065 }
2066
2067 /*
2068 * Check template is okay at the set cpu level
2069 */
2070 if (((itemp->flags & IF_PLEVEL) > cpu))
2071 return 3;
2072
2073 /*
2074 * Check if instruction is available in long mode
2075 */
2076 if ((itemp->flags & IF_NOLONG) && (bits == 64))
2077 return 4;
2078
2079 /*
2080 * Check if special handling needed for Jumps
2081 */
2082 if ((uint8_t)(itemp->code[0]) >= 0370)
2083 return 99;
2084
2085 return ret;
2086 }
2087
2088 static ea *process_ea(operand * input, ea * output, int bits,
2089 int addrbits, int rfield, int32_t rflags)
2090 {
2091 bool forw_ref = !!(input->opflags & OPFLAG_FORWARD);
2092
2093 output->rip = false;
2094
2095 /* REX flags for the rfield operand */
2096 output->rex |= rexflags(rfield, rflags, REX_R|REX_P|REX_W|REX_H);
2097
2098 if (!(REGISTER & ~input->type)) { /* register direct */
2099 int i;
2100 int32_t f;
2101
2102 if (input->basereg < EXPR_REG_START /* Verify as Register */
2103 || input->basereg >= REG_ENUM_LIMIT)
2104 return NULL;
2105 f = regflag(input);
2106 i = nasm_regvals[input->basereg];
2107
2108 if (REG_EA & ~f)
2109 return NULL; /* Invalid EA register */
2110
2111 output->rex |= op_rexflags(input, REX_B|REX_P|REX_W|REX_H);
2112
2113 output->sib_present = false; /* no SIB necessary */
2114 output->bytes = 0; /* no offset necessary either */
2115 output->modrm = 0xC0 | ((rfield & 7) << 3) | (i & 7);
2116 } else { /* it's a memory reference */
2117 if (input->basereg == -1
2118 && (input->indexreg == -1 || input->scale == 0)) {
2119 /* it's a pure offset */
2120 if (bits == 64 && (~input->type & IP_REL)) {
2121 int scale, index, base;
2122 output->sib_present = true;
2123 scale = 0;
2124 index = 4;
2125 base = 5;
2126 output->sib = (scale << 6) | (index << 3) | base;
2127 output->bytes = 4;
2128 output->modrm = 4 | ((rfield & 7) << 3);
2129 output->rip = false;
2130 } else {
2131 output->sib_present = false;
2132 output->bytes = (addrbits != 16 ? 4 : 2);
2133 output->modrm = (addrbits != 16 ? 5 : 6) | ((rfield & 7) << 3);
2134 output->rip = bits == 64;
2135 }
2136 } else { /* it's an indirection */
2137 int i = input->indexreg, b = input->basereg, s = input->scale;
2138 int32_t o = input->offset, seg = input->segment;
2139 int hb = input->hintbase, ht = input->hinttype;
2140 int t;
2141 int it, bt;
2142 int32_t ix, bx; /* register flags */
2143
2144 if (s == 0)
2145 i = -1; /* make this easy, at least */
2146
2147 if (i >= EXPR_REG_START && i < REG_ENUM_LIMIT) {
2148 it = nasm_regvals[i];
2149 ix = nasm_reg_flags[i];
2150 } else {
2151 it = -1;
2152 ix = 0;
2153 }
2154
2155 if (b >= EXPR_REG_START && b < REG_ENUM_LIMIT) {
2156 bt = nasm_regvals[b];
2157 bx = nasm_reg_flags[b];
2158 } else {
2159 bt = -1;
2160 bx = 0;
2161 }
2162
2163 /* check for a 32/64-bit memory reference... */
2164 if ((ix|bx) & (BITS32|BITS64)) {
2165 /* it must be a 32/64-bit memory reference. Firstly we have
2166 * to check that all registers involved are type E/Rxx. */
2167 int32_t sok = BITS32|BITS64;
2168
2169 if (it != -1) {
2170 if (!(REG64 & ~ix) || !(REG32 & ~ix))
2171 sok &= ix;
2172 else
2173 return NULL;
2174 }
2175
2176 if (bt != -1) {
2177 if (REG_GPR & ~bx)
2178 return NULL; /* Invalid register */
2179 if (~sok & bx & SIZE_MASK)
2180 return NULL; /* Invalid size */
2181 sok &= bx;
2182 }
2183
2184 /* While we're here, ensure the user didn't specify
2185 WORD or QWORD. */
2186 if (input->disp_size == 16 || input->disp_size == 64)
2187 return NULL;
2188
2189 if (addrbits == 16 ||
2190 (addrbits == 32 && !(sok & BITS32)) ||
2191 (addrbits == 64 && !(sok & BITS64)))
2192 return NULL;
2193
2194 /* now reorganize base/index */
2195 if (s == 1 && bt != it && bt != -1 && it != -1 &&
2196 ((hb == b && ht == EAH_NOTBASE)
2197 || (hb == i && ht == EAH_MAKEBASE))) {
2198 /* swap if hints say so */
2199 t = bt, bt = it, it = t;
2200 t = bx, bx = ix, ix = t;
2201 }
2202 if (bt == it) /* convert EAX+2*EAX to 3*EAX */
2203 bt = -1, bx = 0, s++;
2204 if (bt == -1 && s == 1 && !(hb == it && ht == EAH_NOTBASE)) {
2205 /* make single reg base, unless hint */
2206 bt = it, bx = ix, it = -1, ix = 0;
2207 }
2208 if (((s == 2 && it != REG_NUM_ESP
2209 && !(input->eaflags & EAF_TIMESTWO)) || s == 3
2210 || s == 5 || s == 9) && bt == -1)
2211 bt = it, bx = ix, s--; /* convert 3*EAX to EAX+2*EAX */
2212 if (it == -1 && (bt & 7) != REG_NUM_ESP
2213 && (input->eaflags & EAF_TIMESTWO))
2214 it = bt, ix = bx, bt = -1, bx = 0, s = 1;
2215 /* convert [NOSPLIT EAX] to sib format with 0x0 displacement */
2216 if (s == 1 && it == REG_NUM_ESP) {
2217 /* swap ESP into base if scale is 1 */
2218 t = it, it = bt, bt = t;
2219 t = ix, ix = bx, bx = t;
2220 }
2221 if (it == REG_NUM_ESP
2222 || (s != 1 && s != 2 && s != 4 && s != 8 && it != -1))
2223 return NULL; /* wrong, for various reasons */
2224
2225 output->rex |= rexflags(it, ix, REX_X);
2226 output->rex |= rexflags(bt, bx, REX_B);
2227
2228 if (it == -1 && (bt & 7) != REG_NUM_ESP) {
2229 /* no SIB needed */
2230 int mod, rm;
2231
2232 if (bt == -1) {
2233 rm = 5;
2234 mod = 0;
2235 } else {
2236 rm = (bt & 7);
2237 if (rm != REG_NUM_EBP && o == 0 &&
2238 seg == NO_SEG && !forw_ref &&
2239 !(input->eaflags &
2240 (EAF_BYTEOFFS | EAF_WORDOFFS)))
2241 mod = 0;
2242 else if (input->eaflags & EAF_BYTEOFFS ||
2243 (o >= -128 && o <= 127 && seg == NO_SEG
2244 && !forw_ref
2245 && !(input->eaflags & EAF_WORDOFFS)))
2246 mod = 1;
2247 else
2248 mod = 2;
2249 }
2250
2251 output->sib_present = false;
2252 output->bytes = (bt == -1 || mod == 2 ? 4 : mod);
2253 output->modrm = (mod << 6) | ((rfield & 7) << 3) | rm;
2254 } else {
2255 /* we need a SIB */
2256 int mod, scale, index, base;
2257
2258 if (it == -1)
2259 index = 4, s = 1;
2260 else
2261 index = (it & 7);
2262
2263 switch (s) {
2264 case 1:
2265 scale = 0;
2266 break;
2267 case 2:
2268 scale = 1;
2269 break;
2270 case 4:
2271 scale = 2;
2272 break;
2273 case 8:
2274 scale = 3;
2275 break;
2276 default: /* then what the smeg is it? */
2277 return NULL; /* panic */
2278 }
2279
2280 if (bt == -1) {
2281 base = 5;
2282 mod = 0;
2283 } else {
2284 base = (bt & 7);
2285 if (base != REG_NUM_EBP && o == 0 &&
2286 seg == NO_SEG && !forw_ref &&
2287 !(input->eaflags &
2288 (EAF_BYTEOFFS | EAF_WORDOFFS)))
2289 mod = 0;
2290 else if (input->eaflags & EAF_BYTEOFFS ||
2291 (o >= -128 && o <= 127 && seg == NO_SEG
2292 && !forw_ref
2293 && !(input->eaflags & EAF_WORDOFFS)))
2294 mod = 1;
2295 else
2296 mod = 2;
2297 }
2298
2299 output->sib_present = true;
2300 output->bytes = (bt == -1 || mod == 2 ? 4 : mod);
2301 output->modrm = (mod << 6) | ((rfield & 7) << 3) | 4;
2302 output->sib = (scale << 6) | (index << 3) | base;
2303 }
2304 } else { /* it's 16-bit */
2305 int mod, rm;
2306
2307 /* check for 64-bit long mode */
2308 if (addrbits == 64)
2309 return NULL;
2310
2311 /* check all registers are BX, BP, SI or DI */
2312 if ((b != -1 && b != R_BP && b != R_BX && b != R_SI
2313 && b != R_DI) || (i != -1 && i != R_BP && i != R_BX
2314 && i != R_SI && i != R_DI))
2315 return NULL;
2316
2317 /* ensure the user didn't specify DWORD/QWORD */
2318 if (input->disp_size == 32 || input->disp_size == 64)
2319 return NULL;
2320
2321 if (s != 1 && i != -1)
2322 return NULL; /* no can do, in 16-bit EA */
2323 if (b == -1 && i != -1) {
2324 int tmp = b;
2325 b = i;
2326 i = tmp;
2327 } /* swap */
2328 if ((b == R_SI || b == R_DI) && i != -1) {
2329 int tmp = b;
2330 b = i;
2331 i = tmp;
2332 }
2333 /* have BX/BP as base, SI/DI index */
2334 if (b == i)
2335 return NULL; /* shouldn't ever happen, in theory */
2336 if (i != -1 && b != -1 &&
2337 (i == R_BP || i == R_BX || b == R_SI || b == R_DI))
2338 return NULL; /* invalid combinations */
2339 if (b == -1) /* pure offset: handled above */
2340 return NULL; /* so if it gets to here, panic! */
2341
2342 rm = -1;
2343 if (i != -1)
2344 switch (i * 256 + b) {
2345 case R_SI * 256 + R_BX:
2346 rm = 0;
2347 break;
2348 case R_DI * 256 + R_BX:
2349 rm = 1;
2350 break;
2351 case R_SI * 256 + R_BP:
2352 rm = 2;
2353 break;
2354 case R_DI * 256 + R_BP:
2355 rm = 3;
2356 break;
2357 } else
2358 switch (b) {
2359 case R_SI:
2360 rm = 4;
2361 break;
2362 case R_DI:
2363 rm = 5;
2364 break;
2365 case R_BP:
2366 rm = 6;
2367 break;
2368 case R_BX:
2369 rm = 7;
2370 break;
2371 }
2372 if (rm == -1) /* can't happen, in theory */
2373 return NULL; /* so panic if it does */
2374
2375 if (o == 0 && seg == NO_SEG && !forw_ref && rm != 6 &&
2376 !(input->eaflags & (EAF_BYTEOFFS | EAF_WORDOFFS)))
2377 mod = 0;
2378 else if (input->eaflags & EAF_BYTEOFFS ||
2379 (o >= -128 && o <= 127 && seg == NO_SEG
2380 && !forw_ref
2381 && !(input->eaflags & EAF_WORDOFFS)))
2382 mod = 1;
2383 else
2384 mod = 2;
2385
2386 output->sib_present = false; /* no SIB - it's 16-bit */
2387 output->bytes = mod; /* bytes of offset needed */
2388 output->modrm = (mod << 6) | ((rfield & 7) << 3) | rm;
2389 }
2390 }
2391 }
2392
2393 output->size = 1 + output->sib_present + output->bytes;
2394 return output;
2395 }
2396
2397 static void add_asp(insn *ins, int addrbits)
2398 {
2399 int j, valid;
2400 int defdisp;
2401
2402 valid = (addrbits == 64) ? 64|32 : 32|16;
2403
2404 switch (ins->prefixes[PPS_ASIZE]) {
2405 case P_A16:
2406 valid &= 16;
2407 break;
2408 case P_A32:
2409 valid &= 32;
2410 break;
2411 case P_A64:
2412 valid &= 64;
2413 break;
2414 case P_ASP:
2415 valid &= (addrbits == 32) ? 16 : 32;
2416 break;
2417 default:
2418 break;
2419 }
2420
2421 for (j = 0; j < ins->operands; j++) {
2422 if (!(MEMORY & ~ins->oprs[j].type)) {
2423 int32_t i, b;
2424
2425 /* Verify as Register */
2426 if (ins->oprs[j].indexreg < EXPR_REG_START
2427 || ins->oprs[j].indexreg >= REG_ENUM_LIMIT)
2428 i = 0;
2429 else
2430 i = nasm_reg_flags[ins->oprs[j].indexreg];
2431
2432 /* Verify as Register */
2433 if (ins->oprs[j].basereg < EXPR_REG_START
2434 || ins->oprs[j].basereg >= REG_ENUM_LIMIT)
2435 b = 0;
2436 else
2437 b = nasm_reg_flags[ins->oprs[j].basereg];
2438
2439 if (ins->oprs[j].scale == 0)
2440 i = 0;
2441
2442 if (!i && !b) {
2443 int ds = ins->oprs[j].disp_size;
2444 if ((addrbits != 64 && ds > 8) ||
2445 (addrbits == 64 && ds == 16))
2446 valid &= ds;
2447 } else {
2448 if (!(REG16 & ~b))
2449 valid &= 16;
2450 if (!(REG32 & ~b))
2451 valid &= 32;
2452 if (!(REG64 & ~b))
2453 valid &= 64;
2454
2455 if (!(REG16 & ~i))
2456 valid &= 16;
2457 if (!(REG32 & ~i))
2458 valid &= 32;
2459 if (!(REG64 & ~i))
2460 valid &= 64;
2461 }
2462 }
2463 }
2464
2465 if (valid & addrbits) {
2466 ins->addr_size = addrbits;
2467 } else if (valid & ((addrbits == 32) ? 16 : 32)) {
2468 /* Add an address size prefix */
2469 enum prefixes pref = (addrbits == 32) ? P_A16 : P_A32;
2470 ins->prefixes[PPS_ASIZE] = pref;
2471 ins->addr_size = (addrbits == 32) ? 16 : 32;
2472 } else {
2473 /* Impossible... */
2474 errfunc(ERR_NONFATAL, "impossible combination of address sizes");
2475 ins->addr_size = addrbits; /* Error recovery */
2476 }
2477
2478 defdisp = ins->addr_size == 16 ? 16 : 32;
2479
2480 for (j = 0; j < ins->operands; j++) {
2481 if (!(MEM_OFFS & ~ins->oprs[j].type) &&
2482 (ins->oprs[j].disp_size ? ins->oprs[j].disp_size : defdisp)
2483 != ins->addr_size) {
2484 /* mem_offs sizes must match the address size; if not,
2485 strip the MEM_OFFS bit and match only EA instructions */
2486 ins->oprs[j].type &= ~(MEM_OFFS & ~MEMORY);
2487 }
2488 }
2489 }
Adding AVX-512 features