?  search:
summary | log | graphiclog1 | graphiclog2 | commit | commitdiff | tree | refs | edit | fork
blame | history | raw | HEAD
NASM: relicense under the 2-clause BSD license
[nasm/avx512.git] / assemble.c
blobe8c281663f979f4dd470888769af6980d84857ed
1 /* ----------------------------------------------------------------------- *
2 *
3 * Copyright 1996-2009 The NASM Authors - All Rights Reserved
4 * See the file AUTHORS included with the NASM distribution for
5 * the specific copyright holders.
6 *
7 * Redistribution and use in source and binary forms, with or without
8 * modification, are permitted provided that the following
9 * conditions are met:
10 *
11 * * Redistributions of source code must retain the above copyright
12 * notice, this list of conditions and the following disclaimer.
13 * * Redistributions in binary form must reproduce the above
14 * copyright notice, this list of conditions and the following
15 * disclaimer in the documentation and/or other materials provided
16 * with the distribution.
17 *
18 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND
19 * CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES,
20 * INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
21 * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
22 * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR
23 * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
24 * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
25 * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
26 * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
27 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
28 * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
29 * OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE,
30 * EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
31 *
32 * ----------------------------------------------------------------------- */
33
34 /*
35 * assemble.c code generation for the Netwide Assembler
36 *
37 * the actual codes (C syntax, i.e. octal):
38 * \0 - terminates the code. (Unless it's a literal of course.)
39 * \1..\4 - that many literal bytes follow in the code stream
40 * \5 - add 4 to the primary operand number (b, low octdigit)
41 * \6 - add 4 to the secondary operand number (a, middle octdigit)
42 * \7 - add 4 to both the primary and the secondary operand number
43 * \10..\13 - a literal byte follows in the code stream, to be added
44 * to the register value of operand 0..3
45 * \14..\17 - a signed byte immediate operand, from operand 0..3
46 * \20..\23 - a byte immediate operand, from operand 0..3
47 * \24..\27 - an unsigned byte immediate operand, from operand 0..3
48 * \30..\33 - a word immediate operand, from operand 0..3
49 * \34..\37 - select between \3[0-3] and \4[0-3] depending on 16/32 bit
50 * assembly mode or the operand-size override on the operand
51 * \40..\43 - a long immediate operand, from operand 0..3
52 * \44..\47 - select between \3[0-3], \4[0-3] and \5[4-7]
53 * depending on the address size of the instruction.
54 * \50..\53 - a byte relative operand, from operand 0..3
55 * \54..\57 - a qword immediate operand, from operand 0..3
56 * \60..\63 - a word relative operand, from operand 0..3
57 * \64..\67 - select between \6[0-3] and \7[0-3] depending on 16/32 bit
58 * assembly mode or the operand-size override on the operand
59 * \70..\73 - a long relative operand, from operand 0..3
60 * \74..\77 - a word constant, from the _segment_ part of operand 0..3
61 * \1ab - a ModRM, calculated on EA in operand a, with the spare
62 * field the register value of operand b.
63 * \140..\143 - an immediate word or signed byte for operand 0..3
64 * \144..\147 - or 2 (s-field) into opcode byte if operand 0..3
65 * is a signed byte rather than a word. Opcode byte follows.
66 * \150..\153 - an immediate dword or signed byte for operand 0..3
67 * \154..\157 - or 2 (s-field) into opcode byte if operand 0..3
68 * is a signed byte rather than a dword. Opcode byte follows.
69 * \160..\163 - this instruction uses DREX rather than REX, with the
70 * OC0 field set to 0, and the dest field taken from
71 * operand 0..3.
72 * \164..\167 - this instruction uses DREX rather than REX, with the
73 * OC0 field set to 1, and the dest field taken from
74 * operand 0..3.
75 * \171 - placement of DREX suffix in the absence of an EA
76 * \172\ab - the register number from operand a in bits 7..4, with
77 * the 4-bit immediate from operand b in bits 3..0.
78 * \173\xab - the register number from operand a in bits 7..4, with
79 * the value b in bits 3..0.
80 * \174\a - the register number from operand a in bits 7..4, and
81 * an arbitrary value in bits 3..0 (assembled as zero.)
82 * \2ab - a ModRM, calculated on EA in operand a, with the spare
83 * field equal to digit b.
84 * \250..\253 - same as \150..\153, except warn if the 64-bit operand
85 * is not equal to the truncated and sign-extended 32-bit
86 * operand; used for 32-bit immediates in 64-bit mode.
87 * \254..\257 - a signed 32-bit operand to be extended to 64 bits.
88 * \260..\263 - this instruction uses VEX/XOP rather than REX, with the
89 * V field taken from operand 0..3.
90 * \270 - this instruction uses VEX/XOP rather than REX, with the
91 * V field set to 1111b.
92 *
93 * VEX/XOP prefixes are followed by the sequence:
94 * \tmm\wlp where mm is the M field; and wlp is:
95 * 00 0ww lpp
96 * [w0] ww = 0 for W = 0
97 * [w1] ww = 1 for W = 1
98 * [wx] ww = 2 for W don't care (always assembled as 0)
99 * [ww] ww = 3 for W used as REX.W
100 *
101 * t = 0 for VEX (C4/C5), t = 1 for XOP (8F).
102 *
103 * \274..\277 - a signed byte immediate operand, from operand 0..3,
104 * which is to be extended to the operand size.
105 * \310 - indicates fixed 16-bit address size, i.e. optional 0x67.
106 * \311 - indicates fixed 32-bit address size, i.e. optional 0x67.
107 * \312 - (disassembler only) invalid with non-default address size.
108 * \313 - indicates fixed 64-bit address size, 0x67 invalid.
109 * \314 - (disassembler only) invalid with REX.B
110 * \315 - (disassembler only) invalid with REX.X
111 * \316 - (disassembler only) invalid with REX.R
112 * \317 - (disassembler only) invalid with REX.W
113 * \320 - indicates fixed 16-bit operand size, i.e. optional 0x66.
114 * \321 - indicates fixed 32-bit operand size, i.e. optional 0x66.
115 * \322 - indicates that this instruction is only valid when the
116 * operand size is the default (instruction to disassembler,
117 * generates no code in the assembler)
118 * \323 - indicates fixed 64-bit operand size, REX on extensions only.
119 * \324 - indicates 64-bit operand size requiring REX prefix.
120 * \325 - instruction which always uses spl/bpl/sil/dil
121 * \330 - a literal byte follows in the code stream, to be added
122 * to the condition code value of the instruction.
123 * \331 - instruction not valid with REP prefix. Hint for
124 * disassembler only; for SSE instructions.
125 * \332 - REP prefix (0xF2 byte) used as opcode extension.
126 * \333 - REP prefix (0xF3 byte) used as opcode extension.
127 * \334 - LOCK prefix used as REX.R (used in non-64-bit mode)
128 * \335 - disassemble a rep (0xF3 byte) prefix as repe not rep.
129 * \336 - force a REP(E) prefix (0xF2) even if not specified.
130 * \337 - force a REPNE prefix (0xF3) even if not specified.
131 * \336-\337 are still listed as prefixes in the disassembler.
132 * \340 - reserve <operand 0> bytes of uninitialized storage.
133 * Operand 0 had better be a segmentless constant.
134 * \341 - this instruction needs a WAIT "prefix"
135 * \344,\345 - the PUSH/POP (respectively) codes for CS, DS, ES, SS
136 * (POP is never used for CS) depending on operand 0
137 * \346,\347 - the second byte of PUSH/POP codes for FS, GS, depending
138 * on operand 0
139 * \360 - no SSE prefix (== \364\331)
140 * \361 - 66 SSE prefix (== \366\331)
141 * \362 - F2 SSE prefix (== \364\332)
142 * \363 - F3 SSE prefix (== \364\333)
143 * \364 - operand-size prefix (0x66) not permitted
144 * \365 - address-size prefix (0x67) not permitted
145 * \366 - operand-size prefix (0x66) used as opcode extension
146 * \367 - address-size prefix (0x67) used as opcode extension
147 * \370,\371,\372 - match only if operand 0 meets byte jump criteria.
148 * 370 is used for Jcc, 371 is used for JMP.
149 * \373 - assemble 0x03 if bits==16, 0x05 if bits==32;
150 * used for conditional jump over longer jump
151 */
152
153 #include "compiler.h"
154
155 #include <stdio.h>
156 #include <string.h>
157 #include <inttypes.h>
158
159 #include "nasm.h"
160 #include "nasmlib.h"
161 #include "assemble.h"
162 #include "insns.h"
163 #include "tables.h"
164
165 typedef struct {
166 int sib_present; /* is a SIB byte necessary? */
167 int bytes; /* # of bytes of offset needed */
168 int size; /* lazy - this is sib+bytes+1 */
169 uint8_t modrm, sib, rex, rip; /* the bytes themselves */
170 } ea;
171
172 static uint32_t cpu; /* cpu level received from nasm.c */
173 static efunc errfunc;
174 static struct ofmt *outfmt;
175 static ListGen *list;
176
177 static int64_t calcsize(int32_t, int64_t, int, insn *, const uint8_t *);
178 static void gencode(int32_t segment, int64_t offset, int bits,
179 insn * ins, const struct itemplate *temp,
180 int64_t insn_end);
181 static int matches(const struct itemplate *, insn *, int bits);
182 static int32_t regflag(const operand *);
183 static int32_t regval(const operand *);
184 static int rexflags(int, int32_t, int);
185 static int op_rexflags(const operand *, int);
186 static ea *process_ea(operand *, ea *, int, int, int, int32_t);
187 static void add_asp(insn *, int);
188
189 static int has_prefix(insn * ins, enum prefix_pos pos, enum prefixes prefix)
190 {
191 return ins->prefixes[pos] == prefix;
192 }
193
194 static void assert_no_prefix(insn * ins, enum prefix_pos pos)
195 {
196 if (ins->prefixes[pos])
197 errfunc(ERR_NONFATAL, "invalid %s prefix",
198 prefix_name(ins->prefixes[pos]));
199 }
200
201 static const char *size_name(int size)
202 {
203 switch (size) {
204 case 1:
205 return "byte";
206 case 2:
207 return "word";
208 case 4:
209 return "dword";
210 case 8:
211 return "qword";
212 case 10:
213 return "tword";
214 case 16:
215 return "oword";
216 case 32:
217 return "yword";
218 default:
219 return "???";
220 }
221 }
222
223 static void warn_overflow(int size, const struct operand *o)
224 {
225 if (size < 8 && o->wrt == NO_SEG && o->segment == NO_SEG) {
226 int64_t lim = ((int64_t)1 << (size*8))-1;
227 int64_t data = o->offset;
228
229 if (data < ~lim || data > lim)
230 errfunc(ERR_WARNING | ERR_PASS2 | ERR_WARN_NOV,
231 "%s data exceeds bounds", size_name(size));
232 }
233 }
234 /*
235 * This routine wrappers the real output format's output routine,
236 * in order to pass a copy of the data off to the listing file
237 * generator at the same time.
238 */
239 static void out(int64_t offset, int32_t segto, const void *data,
240 enum out_type type, uint64_t size,
241 int32_t segment, int32_t wrt)
242 {
243 static int32_t lineno = 0; /* static!!! */
244 static char *lnfname = NULL;
245 uint8_t p[8];
246
247 if (type == OUT_ADDRESS && segment == NO_SEG && wrt == NO_SEG) {
248 /*
249 * This is a non-relocated address, and we're going to
250 * convert it into RAWDATA format.
251 */
252 uint8_t *q = p;
253
254 if (size > 8) {
255 errfunc(ERR_PANIC, "OUT_ADDRESS with size > 8");
256 return;
257 }
258
259 WRITEADDR(q, *(int64_t *)data, size);
260 data = p;
261 type = OUT_RAWDATA;
262 }
263
264 list->output(offset, data, type, size);
265
266 /*
267 * this call to src_get determines when we call the
268 * debug-format-specific "linenum" function
269 * it updates lineno and lnfname to the current values
270 * returning 0 if "same as last time", -2 if lnfname
271 * changed, and the amount by which lineno changed,
272 * if it did. thus, these variables must be static
273 */
274
275 if (src_get(&lineno, &lnfname)) {
276 outfmt->current_dfmt->linenum(lnfname, lineno, segto);
277 }
278
279 outfmt->output(segto, data, type, size, segment, wrt);
280 }
281
282 static bool jmp_match(int32_t segment, int64_t offset, int bits,
283 insn * ins, const uint8_t *code)
284 {
285 int64_t isize;
286 uint8_t c = code[0];
287
288 if ((c != 0370 && c != 0371) || (ins->oprs[0].type & STRICT))
289 return false;
290 if (!optimizing)
291 return false;
292 if (optimizing < 0 && c == 0371)
293 return false;
294
295 isize = calcsize(segment, offset, bits, ins, code);
296
297 if (ins->oprs[0].opflags & OPFLAG_UNKNOWN)
298 /* Be optimistic in pass 1 */
299 return true;
300
301 if (ins->oprs[0].segment != segment)
302 return false;
303
304 isize = ins->oprs[0].offset - offset - isize; /* isize is delta */
305 return (isize >= -128 && isize <= 127); /* is it byte size? */
306 }
307
308 int64_t assemble(int32_t segment, int64_t offset, int bits, uint32_t cp,
309 insn * instruction, struct ofmt *output, efunc error,
310 ListGen * listgen)
311 {
312 const struct itemplate *temp;
313 int j;
314 int size_prob;
315 int64_t insn_end;
316 int32_t itimes;
317 int64_t start = offset;
318 int64_t wsize = 0; /* size for DB etc. */
319
320 errfunc = error; /* to pass to other functions */
321 cpu = cp;
322 outfmt = output; /* likewise */
323 list = listgen; /* and again */
324
325 switch (instruction->opcode) {
326 case -1:
327 return 0;
328 case I_DB:
329 wsize = 1;
330 break;
331 case I_DW:
332 wsize = 2;
333 break;
334 case I_DD:
335 wsize = 4;
336 break;
337 case I_DQ:
338 wsize = 8;
339 break;
340 case I_DT:
341 wsize = 10;
342 break;
343 case I_DO:
344 wsize = 16;
345 break;
346 case I_DY:
347 wsize = 32;
348 break;
349 default:
350 break;
351 }
352
353 if (wsize) {
354 extop *e;
355 int32_t t = instruction->times;
356 if (t < 0)
357 errfunc(ERR_PANIC,
358 "instruction->times < 0 (%ld) in assemble()", t);
359
360 while (t--) { /* repeat TIMES times */
361 for (e = instruction->eops; e; e = e->next) {
362 if (e->type == EOT_DB_NUMBER) {
363 if (wsize == 1) {
364 if (e->segment != NO_SEG)
365 errfunc(ERR_NONFATAL,
366 "one-byte relocation attempted");
367 else {
368 uint8_t out_byte = e->offset;
369 out(offset, segment, &out_byte,
370 OUT_RAWDATA, 1, NO_SEG, NO_SEG);
371 }
372 } else if (wsize > 8) {
373 errfunc(ERR_NONFATAL,
374 "integer supplied to a DT, DO or DY"
375 " instruction");
376 } else
377 out(offset, segment, &e->offset,
378 OUT_ADDRESS, wsize, e->segment, e->wrt);
379 offset += wsize;
380 } else if (e->type == EOT_DB_STRING ||
381 e->type == EOT_DB_STRING_FREE) {
382 int align;
383
384 out(offset, segment, e->stringval,
385 OUT_RAWDATA, e->stringlen, NO_SEG, NO_SEG);
386 align = e->stringlen % wsize;
387
388 if (align) {
389 align = wsize - align;
390 out(offset, segment, zero_buffer,
391 OUT_RAWDATA, align, NO_SEG, NO_SEG);
392 }
393 offset += e->stringlen + align;
394 }
395 }
396 if (t > 0 && t == instruction->times - 1) {
397 /*
398 * Dummy call to list->output to give the offset to the
399 * listing module.
400 */
401 list->output(offset, NULL, OUT_RAWDATA, 0);
402 list->uplevel(LIST_TIMES);
403 }
404 }
405 if (instruction->times > 1)
406 list->downlevel(LIST_TIMES);
407 return offset - start;
408 }
409
410 if (instruction->opcode == I_INCBIN) {
411 const char *fname = instruction->eops->stringval;
412 FILE *fp;
413
414 fp = fopen(fname, "rb");
415 if (!fp) {
416 error(ERR_NONFATAL, "`incbin': unable to open file `%s'",
417 fname);
418 } else if (fseek(fp, 0L, SEEK_END) < 0) {
419 error(ERR_NONFATAL, "`incbin': unable to seek on file `%s'",
420 fname);
421 } else {
422 static char buf[4096];
423 size_t t = instruction->times;
424 size_t base = 0;
425 size_t len;
426
427 len = ftell(fp);
428 if (instruction->eops->next) {
429 base = instruction->eops->next->offset;
430 len -= base;
431 if (instruction->eops->next->next &&
432 len > (size_t)instruction->eops->next->next->offset)
433 len = (size_t)instruction->eops->next->next->offset;
434 }
435 /*
436 * Dummy call to list->output to give the offset to the
437 * listing module.
438 */
439 list->output(offset, NULL, OUT_RAWDATA, 0);
440 list->uplevel(LIST_INCBIN);
441 while (t--) {
442 size_t l;
443
444 fseek(fp, base, SEEK_SET);
445 l = len;
446 while (l > 0) {
447 int32_t m;
448 m = fread(buf, 1, l > sizeof(buf) ? sizeof(buf) : l, fp);
449 if (!m) {
450 /*
451 * This shouldn't happen unless the file
452 * actually changes while we are reading
453 * it.
454 */
455 error(ERR_NONFATAL,
456 "`incbin': unexpected EOF while"
457 " reading file `%s'", fname);
458 t = 0; /* Try to exit cleanly */
459 break;
460 }
461 out(offset, segment, buf, OUT_RAWDATA, m,
462 NO_SEG, NO_SEG);
463 l -= m;
464 }
465 }
466 list->downlevel(LIST_INCBIN);
467 if (instruction->times > 1) {
468 /*
469 * Dummy call to list->output to give the offset to the
470 * listing module.
471 */
472 list->output(offset, NULL, OUT_RAWDATA, 0);
473 list->uplevel(LIST_TIMES);
474 list->downlevel(LIST_TIMES);
475 }
476 fclose(fp);
477 return instruction->times * len;
478 }
479 return 0; /* if we're here, there's an error */
480 }
481
482 /* Check to see if we need an address-size prefix */
483 add_asp(instruction, bits);
484
485 size_prob = 0;
486
487 for (temp = nasm_instructions[instruction->opcode]; temp->opcode != -1; temp++){
488 int m = matches(temp, instruction, bits);
489 if (m == 100 ||
490 (m == 99 && jmp_match(segment, offset, bits,
491 instruction, temp->code))) {
492 /* Matches! */
493 int64_t insn_size = calcsize(segment, offset, bits,
494 instruction, temp->code);
495 itimes = instruction->times;
496 if (insn_size < 0) /* shouldn't be, on pass two */
497 error(ERR_PANIC, "errors made it through from pass one");
498 else
499 while (itimes--) {
500 for (j = 0; j < MAXPREFIX; j++) {
501 uint8_t c = 0;
502 switch (instruction->prefixes[j]) {
503 case P_WAIT:
504 c = 0x9B;
505 break;
506 case P_LOCK:
507 c = 0xF0;
508 break;
509 case P_REPNE:
510 case P_REPNZ:
511 c = 0xF2;
512 break;
513 case P_REPE:
514 case P_REPZ:
515 case P_REP:
516 c = 0xF3;
517 break;
518 case R_CS:
519 if (bits == 64) {
520 error(ERR_WARNING | ERR_PASS2,
521 "cs segment base generated, but will be ignored in 64-bit mode");
522 }
523 c = 0x2E;
524 break;
525 case R_DS:
526 if (bits == 64) {
527 error(ERR_WARNING | ERR_PASS2,
528 "ds segment base generated, but will be ignored in 64-bit mode");
529 }
530 c = 0x3E;
531 break;
532 case R_ES:
533 if (bits == 64) {
534 error(ERR_WARNING | ERR_PASS2,
535 "es segment base generated, but will be ignored in 64-bit mode");
536 }
537 c = 0x26;
538 break;
539 case R_FS:
540 c = 0x64;
541 break;
542 case R_GS:
543 c = 0x65;
544 break;
545 case R_SS:
546 if (bits == 64) {
547 error(ERR_WARNING | ERR_PASS2,
548 "ss segment base generated, but will be ignored in 64-bit mode");
549 }
550 c = 0x36;
551 break;
552 case R_SEGR6:
553 case R_SEGR7:
554 error(ERR_NONFATAL,
555 "segr6 and segr7 cannot be used as prefixes");
556 break;
557 case P_A16:
558 if (bits == 64) {
559 error(ERR_NONFATAL,
560 "16-bit addressing is not supported "
561 "in 64-bit mode");
562 } else if (bits != 16)
563 c = 0x67;
564 break;
565 case P_A32:
566 if (bits != 32)
567 c = 0x67;
568 break;
569 case P_A64:
570 if (bits != 64) {
571 error(ERR_NONFATAL,
572 "64-bit addressing is only supported "
573 "in 64-bit mode");
574 }
575 break;
576 case P_ASP:
577 c = 0x67;
578 break;
579 case P_O16:
580 if (bits != 16)
581 c = 0x66;
582 break;
583 case P_O32:
584 if (bits == 16)
585 c = 0x66;
586 break;
587 case P_O64:
588 /* REX.W */
589 break;
590 case P_OSP:
591 c = 0x66;
592 break;
593 case P_none:
594 break;
595 default:
596 error(ERR_PANIC, "invalid instruction prefix");
597 }
598 if (c != 0) {
599 out(offset, segment, &c, OUT_RAWDATA, 1,
600 NO_SEG, NO_SEG);
601 offset++;
602 }
603 }
604 insn_end = offset + insn_size;
605 gencode(segment, offset, bits, instruction,
606 temp, insn_end);
607 offset += insn_size;
608 if (itimes > 0 && itimes == instruction->times - 1) {
609 /*
610 * Dummy call to list->output to give the offset to the
611 * listing module.
612 */
613 list->output(offset, NULL, OUT_RAWDATA, 0);
614 list->uplevel(LIST_TIMES);
615 }
616 }
617 if (instruction->times > 1)
618 list->downlevel(LIST_TIMES);
619 return offset - start;
620 } else if (m > 0 && m > size_prob) {
621 size_prob = m;
622 }
623 }
624
625 if (temp->opcode == -1) { /* didn't match any instruction */
626 switch (size_prob) {
627 case 1:
628 error(ERR_NONFATAL, "operation size not specified");
629 break;
630 case 2:
631 error(ERR_NONFATAL, "mismatch in operand sizes");
632 break;
633 case 3:
634 error(ERR_NONFATAL, "no instruction for this cpu level");
635 break;
636 case 4:
637 error(ERR_NONFATAL, "instruction not supported in %d-bit mode",
638 bits);
639 break;
640 default:
641 error(ERR_NONFATAL,
642 "invalid combination of opcode and operands");
643 break;
644 }
645 }
646 return 0;
647 }
648
649 int64_t insn_size(int32_t segment, int64_t offset, int bits, uint32_t cp,
650 insn * instruction, efunc error)
651 {
652 const struct itemplate *temp;
653
654 errfunc = error; /* to pass to other functions */
655 cpu = cp;
656
657 if (instruction->opcode == -1)
658 return 0;
659
660 if (instruction->opcode == I_DB || instruction->opcode == I_DW ||
661 instruction->opcode == I_DD || instruction->opcode == I_DQ ||
662 instruction->opcode == I_DT || instruction->opcode == I_DO ||
663 instruction->opcode == I_DY) {
664 extop *e;
665 int32_t isize, osize, wsize = 0; /* placate gcc */
666
667 isize = 0;
668 switch (instruction->opcode) {
669 case I_DB:
670 wsize = 1;
671 break;
672 case I_DW:
673 wsize = 2;
674 break;
675 case I_DD:
676 wsize = 4;
677 break;
678 case I_DQ:
679 wsize = 8;
680 break;
681 case I_DT:
682 wsize = 10;
683 break;
684 case I_DO:
685 wsize = 16;
686 break;
687 case I_DY:
688 wsize = 32;
689 break;
690 default:
691 break;
692 }
693
694 for (e = instruction->eops; e; e = e->next) {
695 int32_t align;
696
697 osize = 0;
698 if (e->type == EOT_DB_NUMBER)
699 osize = 1;
700 else if (e->type == EOT_DB_STRING ||
701 e->type == EOT_DB_STRING_FREE)
702 osize = e->stringlen;
703
704 align = (-osize) % wsize;
705 if (align < 0)
706 align += wsize;
707 isize += osize + align;
708 }
709 return isize * instruction->times;
710 }
711
712 if (instruction->opcode == I_INCBIN) {
713 const char *fname = instruction->eops->stringval;
714 FILE *fp;
715 size_t len;
716
717 fp = fopen(fname, "rb");
718 if (!fp)
719 error(ERR_NONFATAL, "`incbin': unable to open file `%s'",
720 fname);
721 else if (fseek(fp, 0L, SEEK_END) < 0)
722 error(ERR_NONFATAL, "`incbin': unable to seek on file `%s'",
723 fname);
724 else {
725 len = ftell(fp);
726 fclose(fp);
727 if (instruction->eops->next) {
728 len -= instruction->eops->next->offset;
729 if (instruction->eops->next->next &&
730 len > (size_t)instruction->eops->next->next->offset) {
731 len = (size_t)instruction->eops->next->next->offset;
732 }
733 }
734 return instruction->times * len;
735 }
736 return 0; /* if we're here, there's an error */
737 }
738
739 /* Check to see if we need an address-size prefix */
740 add_asp(instruction, bits);
741
742 for (temp = nasm_instructions[instruction->opcode]; temp->opcode != -1; temp++) {
743 int m = matches(temp, instruction, bits);
744 if (m == 100 ||
745 (m == 99 && jmp_match(segment, offset, bits,
746 instruction, temp->code))) {
747 /* we've matched an instruction. */
748 int64_t isize;
749 const uint8_t *codes = temp->code;
750 int j;
751
752 isize = calcsize(segment, offset, bits, instruction, codes);
753 if (isize < 0)
754 return -1;
755 for (j = 0; j < MAXPREFIX; j++) {
756 switch (instruction->prefixes[j]) {
757 case P_A16:
758 if (bits != 16)
759 isize++;
760 break;
761 case P_A32:
762 if (bits != 32)
763 isize++;
764 break;
765 case P_O16:
766 if (bits != 16)
767 isize++;
768 break;
769 case P_O32:
770 if (bits == 16)
771 isize++;
772 break;
773 case P_A64:
774 case P_O64:
775 case P_none:
776 break;
777 default:
778 isize++;
779 break;
780 }
781 }
782 return isize * instruction->times;
783 }
784 }
785 return -1; /* didn't match any instruction */
786 }
787
788 static bool possible_sbyte(operand *o)
789 {
790 return o->wrt == NO_SEG && o->segment == NO_SEG &&
791 !(o->opflags & OPFLAG_UNKNOWN) &&
792 optimizing >= 0 && !(o->type & STRICT);
793 }
794
795 /* check that opn[op] is a signed byte of size 16 or 32 */
796 static bool is_sbyte16(operand *o)
797 {
798 int16_t v;
799
800 if (!possible_sbyte(o))
801 return false;
802
803 v = o->offset;
804 return v >= -128 && v <= 127;
805 }
806
807 static bool is_sbyte32(operand *o)
808 {
809 int32_t v;
810
811 if (!possible_sbyte(o))
812 return false;
813
814 v = o->offset;
815 return v >= -128 && v <= 127;
816 }
817
818 /* Common construct */
819 #define case4(x) case (x): case (x)+1: case (x)+2: case (x)+3
820
821 static int64_t calcsize(int32_t segment, int64_t offset, int bits,
822 insn * ins, const uint8_t *codes)
823 {
824 int64_t length = 0;
825 uint8_t c;
826 int rex_mask = ~0;
827 int op1, op2;
828 struct operand *opx;
829 uint8_t opex = 0;
830
831 ins->rex = 0; /* Ensure REX is reset */
832
833 if (ins->prefixes[PPS_OSIZE] == P_O64)
834 ins->rex |= REX_W;
835
836 (void)segment; /* Don't warn that this parameter is unused */
837 (void)offset; /* Don't warn that this parameter is unused */
838
839 while (*codes) {
840 c = *codes++;
841 op1 = (c & 3) + ((opex & 1) << 2);
842 op2 = ((c >> 3) & 3) + ((opex & 2) << 1);
843 opx = &ins->oprs[op1];
844 opex = 0; /* For the next iteration */
845
846 switch (c) {
847 case 01:
848 case 02:
849 case 03:
850 case 04:
851 codes += c, length += c;
852 break;
853
854 case 05:
855 case 06:
856 case 07:
857 opex = c;
858 break;
859
860 case4(010):
861 ins->rex |=
862 op_rexflags(opx, REX_B|REX_H|REX_P|REX_W);
863 codes++, length++;
864 break;
865
866 case4(014):
867 case4(020):
868 case4(024):
869 length++;
870 break;
871
872 case4(030):
873 length += 2;
874 break;
875
876 case4(034):
877 if (opx->type & (BITS16 | BITS32 | BITS64))
878 length += (opx->type & BITS16) ? 2 : 4;
879 else
880 length += (bits == 16) ? 2 : 4;
881 break;
882
883 case4(040):
884 length += 4;
885 break;
886
887 case4(044):
888 length += ins->addr_size >> 3;
889 break;
890
891 case4(050):
892 length++;
893 break;
894
895 case4(054):
896 length += 8; /* MOV reg64/imm */
897 break;
898
899 case4(060):
900 length += 2;
901 break;
902
903 case4(064):
904 if (opx->type & (BITS16 | BITS32 | BITS64))
905 length += (opx->type & BITS16) ? 2 : 4;
906 else
907 length += (bits == 16) ? 2 : 4;
908 break;
909
910 case4(070):
911 length += 4;
912 break;
913
914 case4(074):
915 length += 2;
916 break;
917
918 case4(0140):
919 length += is_sbyte16(opx) ? 1 : 2;
920 break;
921
922 case4(0144):
923 codes++;
924 length++;
925 break;
926
927 case4(0150):
928 length += is_sbyte32(opx) ? 1 : 4;
929 break;
930
931 case4(0154):
932 codes++;
933 length++;
934 break;
935
936 case4(0160):
937 length++;
938 ins->rex |= REX_D;
939 ins->drexdst = regval(opx);
940 break;
941
942 case4(0164):
943 length++;
944 ins->rex |= REX_D|REX_OC;
945 ins->drexdst = regval(opx);
946 break;
947
948 case 0171:
949 break;
950
951 case 0172:
952 case 0173:
953 case 0174:
954 codes++;
955 length++;
956 break;
957
958 case4(0250):
959 length += is_sbyte32(opx) ? 1 : 4;
960 break;
961
962 case4(0254):
963 length += 4;
964 break;
965
966 case4(0260):
967 ins->rex |= REX_V;
968 ins->drexdst = regval(opx);
969 ins->vex_cm = *codes++;
970 ins->vex_wlp = *codes++;
971 break;
972
973 case 0270:
974 ins->rex |= REX_V;
975 ins->drexdst = 0;
976 ins->vex_cm = *codes++;
977 ins->vex_wlp = *codes++;
978 break;
979
980 case4(0274):
981 length++;
982 break;
983
984 case4(0300):
985 break;
986
987 case 0310:
988 if (bits == 64)
989 return -1;
990 length += (bits != 16) && !has_prefix(ins, PPS_ASIZE, P_A16);
991 break;
992
993 case 0311:
994 length += (bits != 32) && !has_prefix(ins, PPS_ASIZE, P_A32);
995 break;
996
997 case 0312:
998 break;
999
1000 case 0313:
1001 if (bits != 64 || has_prefix(ins, PPS_ASIZE, P_A16) ||
1002 has_prefix(ins, PPS_ASIZE, P_A32))
1003 return -1;
1004 break;
1005
1006 case4(0314):
1007 break;
1008
1009 case 0320:
1010 length += (bits != 16);
1011 break;
1012
1013 case 0321:
1014 length += (bits == 16);
1015 break;
1016
1017 case 0322:
1018 break;
1019
1020 case 0323:
1021 rex_mask &= ~REX_W;
1022 break;
1023
1024 case 0324:
1025 ins->rex |= REX_W;
1026 break;
1027
1028 case 0325:
1029 ins->rex |= REX_NH;
1030 break;
1031
1032 case 0330:
1033 codes++, length++;
1034 break;
1035
1036 case 0331:
1037 break;
1038
1039 case 0332:
1040 case 0333:
1041 length++;
1042 break;
1043
1044 case 0334:
1045 ins->rex |= REX_L;
1046 break;
1047
1048 case 0335:
1049 break;
1050
1051 case 0336:
1052 if (!ins->prefixes[PPS_LREP])
1053 ins->prefixes[PPS_LREP] = P_REP;
1054 break;
1055
1056 case 0337:
1057 if (!ins->prefixes[PPS_LREP])
1058 ins->prefixes[PPS_LREP] = P_REPNE;
1059 break;
1060
1061 case 0340:
1062 if (ins->oprs[0].segment != NO_SEG)
1063 errfunc(ERR_NONFATAL, "attempt to reserve non-constant"
1064 " quantity of BSS space");
1065 else
1066 length += ins->oprs[0].offset;
1067 break;
1068
1069 case 0341:
1070 if (!ins->prefixes[PPS_WAIT])
1071 ins->prefixes[PPS_WAIT] = P_WAIT;
1072 break;
1073
1074 case4(0344):
1075 length++;
1076 break;
1077
1078 case 0360:
1079 break;
1080
1081 case 0361:
1082 case 0362:
1083 case 0363:
1084 length++;
1085 break;
1086
1087 case 0364:
1088 case 0365:
1089 break;
1090
1091 case 0366:
1092 case 0367:
1093 length++;
1094 break;
1095
1096 case 0370:
1097 case 0371:
1098 case 0372:
1099 break;
1100
1101 case 0373:
1102 length++;
1103 break;
1104
1105 case4(0100):
1106 case4(0110):
1107 case4(0120):
1108 case4(0130):
1109 case4(0200):
1110 case4(0204):
1111 case4(0210):
1112 case4(0214):
1113 case4(0220):
1114 case4(0224):
1115 case4(0230):
1116 case4(0234):
1117 {
1118 ea ea_data;
1119 int rfield;
1120 int32_t rflags;
1121 struct operand *opy = &ins->oprs[op2];
1122
1123 ea_data.rex = 0; /* Ensure ea.REX is initially 0 */
1124
1125 if (c <= 0177) {
1126 /* pick rfield from operand b (opx) */
1127 rflags = regflag(opx);
1128 rfield = nasm_regvals[opx->basereg];
1129 } else {
1130 rflags = 0;
1131 rfield = c & 7;
1132 }
1133 if (!process_ea(opy, &ea_data, bits,
1134 ins->addr_size, rfield, rflags)) {
1135 errfunc(ERR_NONFATAL, "invalid effective address");
1136 return -1;
1137 } else {
1138 ins->rex |= ea_data.rex;
1139 length += ea_data.size;
1140 }
1141 }
1142 break;
1143
1144 default:
1145 errfunc(ERR_PANIC, "internal instruction table corrupt"
1146 ": instruction code \\%o (0x%02X) given", c, c);
1147 break;
1148 }
1149 }
1150
1151 ins->rex &= rex_mask;
1152
1153 if (ins->rex & REX_NH) {
1154 if (ins->rex & REX_H) {
1155 errfunc(ERR_NONFATAL, "instruction cannot use high registers");
1156 return -1;
1157 }
1158 ins->rex &= ~REX_P; /* Don't force REX prefix due to high reg */
1159 }
1160
1161 if (ins->rex & REX_V) {
1162 int bad32 = REX_R|REX_W|REX_X|REX_B;
1163
1164 if (ins->rex & REX_H) {
1165 errfunc(ERR_NONFATAL, "cannot use high register in vex instruction");
1166 return -1;
1167 }
1168 switch (ins->vex_wlp & 030) {
1169 case 000:
1170 case 020:
1171 ins->rex &= ~REX_W;
1172 break;
1173 case 010:
1174 ins->rex |= REX_W;
1175 bad32 &= ~REX_W;
1176 break;
1177 case 030:
1178 /* Follow REX_W */
1179 break;
1180 }
1181
1182 if (bits != 64 && ((ins->rex & bad32) || ins->drexdst > 7)) {
1183 errfunc(ERR_NONFATAL, "invalid operands in non-64-bit mode");
1184 return -1;
1185 }
1186 if (ins->vex_cm != 1 || (ins->rex & (REX_W|REX_R|REX_B)))
1187 length += 3;
1188 else
1189 length += 2;
1190 } else if (ins->rex & REX_D) {
1191 if (ins->rex & REX_H) {
1192 errfunc(ERR_NONFATAL, "cannot use high register in drex instruction");
1193 return -1;
1194 }
1195 if (bits != 64 && ((ins->rex & (REX_R|REX_W|REX_X|REX_B)) ||
1196 ins->drexdst > 7)) {
1197 errfunc(ERR_NONFATAL, "invalid operands in non-64-bit mode");
1198 return -1;
1199 }
1200 length++;
1201 } else if (ins->rex & REX_REAL) {
1202 if (ins->rex & REX_H) {
1203 errfunc(ERR_NONFATAL, "cannot use high register in rex instruction");
1204 return -1;
1205 } else if (bits == 64) {
1206 length++;
1207 } else if ((ins->rex & REX_L) &&
1208 !(ins->rex & (REX_P|REX_W|REX_X|REX_B)) &&
1209 cpu >= IF_X86_64) {
1210 /* LOCK-as-REX.R */
1211 assert_no_prefix(ins, PPS_LREP);
1212 length++;
1213 } else {
1214 errfunc(ERR_NONFATAL, "invalid operands in non-64-bit mode");
1215 return -1;
1216 }
1217 }
1218
1219 return length;
1220 }
1221
1222 #define EMIT_REX() \
1223 if (!(ins->rex & (REX_D|REX_V)) && (ins->rex & REX_REAL) && (bits == 64)) { \
1224 ins->rex = (ins->rex & REX_REAL)|REX_P; \
1225 out(offset, segment, &ins->rex, OUT_RAWDATA, 1, NO_SEG, NO_SEG); \
1226 ins->rex = 0; \
1227 offset += 1; \
1228 }
1229
1230 static void gencode(int32_t segment, int64_t offset, int bits,
1231 insn * ins, const struct itemplate *temp,
1232 int64_t insn_end)
1233 {
1234 static char condval[] = { /* conditional opcodes */
1235 0x7, 0x3, 0x2, 0x6, 0x2, 0x4, 0xF, 0xD, 0xC, 0xE, 0x6, 0x2,
1236 0x3, 0x7, 0x3, 0x5, 0xE, 0xC, 0xD, 0xF, 0x1, 0xB, 0x9, 0x5,
1237 0x0, 0xA, 0xA, 0xB, 0x8, 0x4
1238 };
1239 uint8_t c;
1240 uint8_t bytes[4];
1241 int64_t size;
1242 int64_t data;
1243 int op1, op2;
1244 struct operand *opx;
1245 const uint8_t *codes = temp->code;
1246 uint8_t opex = 0;
1247
1248 while (*codes) {
1249 c = *codes++;
1250 op1 = (c & 3) + ((opex & 1) << 2);
1251 op2 = ((c >> 3) & 3) + ((opex & 2) << 1);
1252 opx = &ins->oprs[op1];
1253 opex = 0; /* For the next iteration */
1254
1255 switch (c) {
1256 case 01:
1257 case 02:
1258 case 03:
1259 case 04:
1260 EMIT_REX();
1261 out(offset, segment, codes, OUT_RAWDATA, c, NO_SEG, NO_SEG);
1262 codes += c;
1263 offset += c;
1264 break;
1265
1266 case 05:
1267 case 06:
1268 case 07:
1269 opex = c;
1270 break;
1271
1272 case4(010):
1273 EMIT_REX();
1274 bytes[0] = *codes++ + (regval(opx) & 7);
1275 out(offset, segment, bytes, OUT_RAWDATA, 1, NO_SEG, NO_SEG);
1276 offset += 1;
1277 break;
1278
1279 case4(014):
1280 /* The test for BITS8 and SBYTE here is intended to avoid
1281 warning on optimizer actions due to SBYTE, while still
1282 warn on explicit BYTE directives. Also warn, obviously,
1283 if the optimizer isn't enabled. */
1284 if (((opx->type & BITS8) ||
1285 !(opx->type & temp->opd[op1] & BYTENESS)) &&
1286 (opx->offset < -128 || opx->offset > 127)) {
1287 errfunc(ERR_WARNING | ERR_PASS2 | ERR_WARN_NOV,
1288 "signed byte value exceeds bounds");
1289 }
1290 if (opx->segment != NO_SEG) {
1291 data = opx->offset;
1292 out(offset, segment, &data, OUT_ADDRESS, 1,
1293 opx->segment, opx->wrt);
1294 } else {
1295 bytes[0] = opx->offset;
1296 out(offset, segment, bytes, OUT_RAWDATA, 1, NO_SEG,
1297 NO_SEG);
1298 }
1299 offset += 1;
1300 break;
1301
1302 case4(020):
1303 if (opx->offset < -256 || opx->offset > 255) {
1304 errfunc(ERR_WARNING | ERR_PASS2 | ERR_WARN_NOV,
1305 "byte value exceeds bounds");
1306 }
1307 if (opx->segment != NO_SEG) {
1308 data = opx->offset;
1309 out(offset, segment, &data, OUT_ADDRESS, 1,
1310 opx->segment, opx->wrt);
1311 } else {
1312 bytes[0] = opx->offset;
1313 out(offset, segment, bytes, OUT_RAWDATA, 1, NO_SEG,
1314 NO_SEG);
1315 }
1316 offset += 1;
1317 break;
1318
1319 case4(024):
1320 if (opx->offset < 0 || opx->offset > 255)
1321 errfunc(ERR_WARNING | ERR_PASS2 | ERR_WARN_NOV,
1322 "unsigned byte value exceeds bounds");
1323 if (opx->segment != NO_SEG) {
1324 data = opx->offset;
1325 out(offset, segment, &data, OUT_ADDRESS, 1,
1326 opx->segment, opx->wrt);
1327 } else {
1328 bytes[0] = opx->offset;
1329 out(offset, segment, bytes, OUT_RAWDATA, 1, NO_SEG,
1330 NO_SEG);
1331 }
1332 offset += 1;
1333 break;
1334
1335 case4(030):
1336 warn_overflow(2, opx);
1337 data = opx->offset;
1338 out(offset, segment, &data, OUT_ADDRESS, 2,
1339 opx->segment, opx->wrt);
1340 offset += 2;
1341 break;
1342
1343 case4(034):
1344 if (opx->type & (BITS16 | BITS32))
1345 size = (opx->type & BITS16) ? 2 : 4;
1346 else
1347 size = (bits == 16) ? 2 : 4;
1348 warn_overflow(size, opx);
1349 data = opx->offset;
1350 out(offset, segment, &data, OUT_ADDRESS, size,
1351 opx->segment, opx->wrt);
1352 offset += size;
1353 break;
1354
1355 case4(040):
1356 warn_overflow(4, opx);
1357 data = opx->offset;
1358 out(offset, segment, &data, OUT_ADDRESS, 4,
1359 opx->segment, opx->wrt);
1360 offset += 4;
1361 break;
1362
1363 case4(044):
1364 data = opx->offset;
1365 size = ins->addr_size >> 3;
1366 warn_overflow(size, opx);
1367 out(offset, segment, &data, OUT_ADDRESS, size,
1368 opx->segment, opx->wrt);
1369 offset += size;
1370 break;
1371
1372 case4(050):
1373 if (opx->segment != segment)
1374 errfunc(ERR_NONFATAL,
1375 "short relative jump outside segment");
1376 data = opx->offset - insn_end;
1377 if (data > 127 || data < -128)
1378 errfunc(ERR_NONFATAL, "short jump is out of range");
1379 bytes[0] = data;
1380 out(offset, segment, bytes, OUT_RAWDATA, 1, NO_SEG, NO_SEG);
1381 offset += 1;
1382 break;
1383
1384 case4(054):
1385 data = (int64_t)opx->offset;
1386 out(offset, segment, &data, OUT_ADDRESS, 8,
1387 opx->segment, opx->wrt);
1388 offset += 8;
1389 break;
1390
1391 case4(060):
1392 if (opx->segment != segment) {
1393 data = opx->offset;
1394 out(offset, segment, &data,
1395 OUT_REL2ADR, insn_end - offset,
1396 opx->segment, opx->wrt);
1397 } else {
1398 data = opx->offset - insn_end;
1399 out(offset, segment, &data,
1400 OUT_ADDRESS, 2, NO_SEG, NO_SEG);
1401 }
1402 offset += 2;
1403 break;
1404
1405 case4(064):
1406 if (opx->type & (BITS16 | BITS32 | BITS64))
1407 size = (opx->type & BITS16) ? 2 : 4;
1408 else
1409 size = (bits == 16) ? 2 : 4;
1410 if (opx->segment != segment) {
1411 data = opx->offset;
1412 out(offset, segment, &data,
1413 size == 2 ? OUT_REL2ADR : OUT_REL4ADR,
1414 insn_end - offset, opx->segment, opx->wrt);
1415 } else {
1416 data = opx->offset - insn_end;
1417 out(offset, segment, &data,
1418 OUT_ADDRESS, size, NO_SEG, NO_SEG);
1419 }
1420 offset += size;
1421 break;
1422
1423 case4(070):
1424 if (opx->segment != segment) {
1425 data = opx->offset;
1426 out(offset, segment, &data,
1427 OUT_REL4ADR, insn_end - offset,
1428 opx->segment, opx->wrt);
1429 } else {
1430 data = opx->offset - insn_end;
1431 out(offset, segment, &data,
1432 OUT_ADDRESS, 4, NO_SEG, NO_SEG);
1433 }
1434 offset += 4;
1435 break;
1436
1437 case4(074):
1438 if (opx->segment == NO_SEG)
1439 errfunc(ERR_NONFATAL, "value referenced by FAR is not"
1440 " relocatable");
1441 data = 0;
1442 out(offset, segment, &data, OUT_ADDRESS, 2,
1443 outfmt->segbase(1 + opx->segment),
1444 opx->wrt);
1445 offset += 2;
1446 break;
1447
1448 case4(0140):
1449 data = opx->offset;
1450 warn_overflow(2, opx);
1451 if (is_sbyte16(opx)) {
1452 bytes[0] = data;
1453 out(offset, segment, bytes, OUT_RAWDATA, 1, NO_SEG,
1454 NO_SEG);
1455 offset++;
1456 } else {
1457 out(offset, segment, &data, OUT_ADDRESS, 2,
1458 opx->segment, opx->wrt);
1459 offset += 2;
1460 }
1461 break;
1462
1463 case4(0144):
1464 EMIT_REX();
1465 bytes[0] = *codes++;
1466 if (is_sbyte16(opx))
1467 bytes[0] |= 2; /* s-bit */
1468 out(offset, segment, bytes, OUT_RAWDATA, 1, NO_SEG, NO_SEG);
1469 offset++;
1470 break;
1471
1472 case4(0150):
1473 data = opx->offset;
1474 warn_overflow(4, opx);
1475 if (is_sbyte32(opx)) {
1476 bytes[0] = data;
1477 out(offset, segment, bytes, OUT_RAWDATA, 1, NO_SEG,
1478 NO_SEG);
1479 offset++;
1480 } else {
1481 out(offset, segment, &data, OUT_ADDRESS, 4,
1482 opx->segment, opx->wrt);
1483 offset += 4;
1484 }
1485 break;
1486
1487 case4(0154):
1488 EMIT_REX();
1489 bytes[0] = *codes++;
1490 if (is_sbyte32(opx))
1491 bytes[0] |= 2; /* s-bit */
1492 out(offset, segment, bytes, OUT_RAWDATA, 1, NO_SEG, NO_SEG);
1493 offset++;
1494 break;
1495
1496 case4(0160):
1497 case4(0164):
1498 break;
1499
1500 case 0171:
1501 bytes[0] =
1502 (ins->drexdst << 4) |
1503 (ins->rex & REX_OC ? 0x08 : 0) |
1504 (ins->rex & (REX_R|REX_X|REX_B));
1505 ins->rex = 0;
1506 out(offset, segment, bytes, OUT_RAWDATA, 1, NO_SEG, NO_SEG);
1507 offset++;
1508 break;
1509
1510 case 0172:
1511 c = *codes++;
1512 opx = &ins->oprs[c >> 3];
1513 bytes[0] = nasm_regvals[opx->basereg] << 4;
1514 opx = &ins->oprs[c & 7];
1515 if (opx->segment != NO_SEG || opx->wrt != NO_SEG) {
1516 errfunc(ERR_NONFATAL,
1517 "non-absolute expression not permitted as argument %d",
1518 c & 7);
1519 } else {
1520 if (opx->offset & ~15) {
1521 errfunc(ERR_WARNING | ERR_PASS2 | ERR_WARN_NOV,
1522 "four-bit argument exceeds bounds");
1523 }
1524 bytes[0] |= opx->offset & 15;
1525 }
1526 out(offset, segment, bytes, OUT_RAWDATA, 1, NO_SEG, NO_SEG);
1527 offset++;
1528 break;
1529
1530 case 0173:
1531 c = *codes++;
1532 opx = &ins->oprs[c >> 4];
1533 bytes[0] = nasm_regvals[opx->basereg] << 4;
1534 bytes[0] |= c & 15;
1535 out(offset, segment, bytes, OUT_RAWDATA, 1, NO_SEG, NO_SEG);
1536 offset++;
1537 break;
1538
1539 case 0174:
1540 c = *codes++;
1541 opx = &ins->oprs[c];
1542 bytes[0] = nasm_regvals[opx->basereg] << 4;
1543 out(offset, segment, bytes, OUT_RAWDATA, 1, NO_SEG, NO_SEG);
1544 offset++;
1545 break;
1546
1547 case4(0250):
1548 data = opx->offset;
1549 if (opx->wrt == NO_SEG && opx->segment == NO_SEG &&
1550 (int32_t)data != (int64_t)data) {
1551 errfunc(ERR_WARNING | ERR_PASS2 | ERR_WARN_NOV,
1552 "signed dword immediate exceeds bounds");
1553 }
1554 if (is_sbyte32(opx)) {
1555 bytes[0] = data;
1556 out(offset, segment, bytes, OUT_RAWDATA, 1, NO_SEG,
1557 NO_SEG);
1558 offset++;
1559 } else {
1560 out(offset, segment, &data, OUT_ADDRESS, 4,
1561 opx->segment, opx->wrt);
1562 offset += 4;
1563 }
1564 break;
1565
1566 case4(0254):
1567 data = opx->offset;
1568 if (opx->wrt == NO_SEG && opx->segment == NO_SEG &&
1569 (int32_t)data != (int64_t)data) {
1570 errfunc(ERR_WARNING | ERR_PASS2 | ERR_WARN_NOV,
1571 "signed dword immediate exceeds bounds");
1572 }
1573 out(offset, segment, &data, OUT_ADDRESS, 4,
1574 opx->segment, opx->wrt);
1575 offset += 4;
1576 break;
1577
1578 case4(0260):
1579 case 0270:
1580 codes += 2;
1581 if (ins->vex_cm != 1 || (ins->rex & (REX_W|REX_X|REX_B))) {
1582 bytes[0] = (ins->vex_cm >> 6) ? 0x8f : 0xc4;
1583 bytes[1] = (ins->vex_cm & 31) | ((~ins->rex & 7) << 5);
1584 bytes[2] = ((ins->rex & REX_W) << (7-3)) |
1585 ((~ins->drexdst & 15)<< 3) | (ins->vex_wlp & 07);
1586 out(offset, segment, &bytes, OUT_RAWDATA, 3, NO_SEG, NO_SEG);
1587 offset += 3;
1588 } else {
1589 bytes[0] = 0xc5;
1590 bytes[1] = ((~ins->rex & REX_R) << (7-2)) |
1591 ((~ins->drexdst & 15) << 3) | (ins->vex_wlp & 07);
1592 out(offset, segment, &bytes, OUT_RAWDATA, 2, NO_SEG, NO_SEG);
1593 offset += 2;
1594 }
1595 break;
1596
1597 case4(0274):
1598 {
1599 uint64_t uv, um;
1600 int s;
1601
1602 if (ins->rex & REX_W)
1603 s = 64;
1604 else if (ins->prefixes[PPS_OSIZE] == P_O16)
1605 s = 16;
1606 else if (ins->prefixes[PPS_OSIZE] == P_O32)
1607 s = 32;
1608 else
1609 s = bits;
1610
1611 um = (uint64_t)2 << (s-1);
1612 uv = opx->offset;
1613
1614 if (uv > 127 && uv < (uint64_t)-128 &&
1615 (uv < um-128 || uv > um-1)) {
1616 errfunc(ERR_WARNING | ERR_PASS2 | ERR_WARN_NOV,
1617 "signed byte value exceeds bounds");
1618 }
1619 if (opx->segment != NO_SEG) {
1620 data = uv;
1621 out(offset, segment, &data, OUT_ADDRESS, 1,
1622 opx->segment, opx->wrt);
1623 } else {
1624 bytes[0] = uv;
1625 out(offset, segment, bytes, OUT_RAWDATA, 1, NO_SEG,
1626 NO_SEG);
1627 }
1628 offset += 1;
1629 break;
1630 }
1631
1632 case4(0300):
1633 break;
1634
1635 case 0310:
1636 if (bits == 32 && !has_prefix(ins, PPS_ASIZE, P_A16)) {
1637 *bytes = 0x67;
1638 out(offset, segment, bytes, OUT_RAWDATA, 1, NO_SEG, NO_SEG);
1639 offset += 1;
1640 } else
1641 offset += 0;
1642 break;
1643
1644 case 0311:
1645 if (bits != 32 && !has_prefix(ins, PPS_ASIZE, P_A32)) {
1646 *bytes = 0x67;
1647 out(offset, segment, bytes, OUT_RAWDATA, 1, NO_SEG, NO_SEG);
1648 offset += 1;
1649 } else
1650 offset += 0;
1651 break;
1652
1653 case 0312:
1654 break;
1655
1656 case 0313:
1657 ins->rex = 0;
1658 break;
1659
1660 case4(0314):
1661 break;
1662
1663 case 0320:
1664 if (bits != 16) {
1665 *bytes = 0x66;
1666 out(offset, segment, bytes, OUT_RAWDATA, 1, NO_SEG, NO_SEG);
1667 offset += 1;
1668 } else
1669 offset += 0;
1670 break;
1671
1672 case 0321:
1673 if (bits == 16) {
1674 *bytes = 0x66;
1675 out(offset, segment, bytes, OUT_RAWDATA, 1, NO_SEG, NO_SEG);
1676 offset += 1;
1677 } else
1678 offset += 0;
1679 break;
1680
1681 case 0322:
1682 case 0323:
1683 break;
1684
1685 case 0324:
1686 ins->rex |= REX_W;
1687 break;
1688
1689 case 0325:
1690 break;
1691
1692 case 0330:
1693 *bytes = *codes++ ^ condval[ins->condition];
1694 out(offset, segment, bytes, OUT_RAWDATA, 1, NO_SEG, NO_SEG);
1695 offset += 1;
1696 break;
1697
1698 case 0331:
1699 break;
1700
1701 case 0332:
1702 case 0333:
1703 *bytes = c - 0332 + 0xF2;
1704 out(offset, segment, bytes, OUT_RAWDATA, 1, NO_SEG, NO_SEG);
1705 offset += 1;
1706 break;
1707
1708 case 0334:
1709 if (ins->rex & REX_R) {
1710 *bytes = 0xF0;
1711 out(offset, segment, bytes, OUT_RAWDATA, 1, NO_SEG, NO_SEG);
1712 offset += 1;
1713 }
1714 ins->rex &= ~(REX_L|REX_R);
1715 break;
1716
1717 case 0335:
1718 break;
1719
1720 case 0336:
1721 case 0337:
1722 break;
1723
1724 case 0340:
1725 if (ins->oprs[0].segment != NO_SEG)
1726 errfunc(ERR_PANIC, "non-constant BSS size in pass two");
1727 else {
1728 int64_t size = ins->oprs[0].offset;
1729 if (size > 0)
1730 out(offset, segment, NULL,
1731 OUT_RESERVE, size, NO_SEG, NO_SEG);
1732 offset += size;
1733 }
1734 break;
1735
1736 case 0341:
1737 break;
1738
1739 case 0344:
1740 case 0345:
1741 bytes[0] = c & 1;
1742 switch (ins->oprs[0].basereg) {
1743 case R_CS:
1744 bytes[0] += 0x0E;
1745 break;
1746 case R_DS:
1747 bytes[0] += 0x1E;
1748 break;
1749 case R_ES:
1750 bytes[0] += 0x06;
1751 break;
1752 case R_SS:
1753 bytes[0] += 0x16;
1754 break;
1755 default:
1756 errfunc(ERR_PANIC,
1757 "bizarre 8086 segment register received");
1758 }
1759 out(offset, segment, bytes, OUT_RAWDATA, 1, NO_SEG, NO_SEG);
1760 offset++;
1761 break;
1762
1763 case 0346:
1764 case 0347:
1765 bytes[0] = c & 1;
1766 switch (ins->oprs[0].basereg) {
1767 case R_FS:
1768 bytes[0] += 0xA0;
1769 break;
1770 case R_GS:
1771 bytes[0] += 0xA8;
1772 break;
1773 default:
1774 errfunc(ERR_PANIC,
1775 "bizarre 386 segment register received");
1776 }
1777 out(offset, segment, bytes, OUT_RAWDATA, 1, NO_SEG, NO_SEG);
1778 offset++;
1779 break;
1780
1781 case 0360:
1782 break;
1783
1784 case 0361:
1785 bytes[0] = 0x66;
1786 out(offset, segment, bytes, OUT_RAWDATA, 1, NO_SEG, NO_SEG);
1787 offset += 1;
1788 break;
1789
1790 case 0362:
1791 case 0363:
1792 bytes[0] = c - 0362 + 0xf2;
1793 out(offset, segment, bytes, OUT_RAWDATA, 1, NO_SEG, NO_SEG);
1794 offset += 1;
1795 break;
1796
1797 case 0364:
1798 case 0365:
1799 break;
1800
1801 case 0366:
1802 case 0367:
1803 *bytes = c - 0366 + 0x66;
1804 out(offset, segment, bytes, OUT_RAWDATA, 1, NO_SEG, NO_SEG);
1805 offset += 1;
1806 break;
1807
1808 case 0370:
1809 case 0371:
1810 case 0372:
1811 break;
1812
1813 case 0373:
1814 *bytes = bits == 16 ? 3 : 5;
1815 out(offset, segment, bytes, OUT_RAWDATA, 1, NO_SEG, NO_SEG);
1816 offset += 1;
1817 break;
1818
1819 case4(0100):
1820 case4(0110):
1821 case4(0120):
1822 case4(0130):
1823 case4(0200):
1824 case4(0204):
1825 case4(0210):
1826 case4(0214):
1827 case4(0220):
1828 case4(0224):
1829 case4(0230):
1830 case4(0234):
1831 {
1832 ea ea_data;
1833 int rfield;
1834 int32_t rflags;
1835 uint8_t *p;
1836 int32_t s;
1837 enum out_type type;
1838 struct operand *opy = &ins->oprs[op2];
1839
1840 if (c <= 0177) {
1841 /* pick rfield from operand b (opx) */
1842 rflags = regflag(opx);
1843 rfield = nasm_regvals[opx->basereg];
1844 } else {
1845 /* rfield is constant */
1846 rflags = 0;
1847 rfield = c & 7;
1848 }
1849
1850 if (!process_ea(opy, &ea_data, bits, ins->addr_size,
1851 rfield, rflags)) {
1852 errfunc(ERR_NONFATAL, "invalid effective address");
1853 }
1854
1855
1856 p = bytes;
1857 *p++ = ea_data.modrm;
1858 if (ea_data.sib_present)
1859 *p++ = ea_data.sib;
1860
1861 /* DREX suffixes come between the SIB and the displacement */
1862 if (ins->rex & REX_D) {
1863 *p++ = (ins->drexdst << 4) |
1864 (ins->rex & REX_OC ? 0x08 : 0) |
1865 (ins->rex & (REX_R|REX_X|REX_B));
1866 ins->rex = 0;
1867 }
1868
1869 s = p - bytes;
1870 out(offset, segment, bytes, OUT_RAWDATA, s, NO_SEG, NO_SEG);
1871
1872 /*
1873 * Make sure the address gets the right offset in case
1874 * the line breaks in the .lst file (BR 1197827)
1875 */
1876 offset += s;
1877 s = 0;
1878
1879 switch (ea_data.bytes) {
1880 case 0:
1881 break;
1882 case 1:
1883 case 2:
1884 case 4:
1885 case 8:
1886 data = opy->offset;
1887 warn_overflow(ea_data.bytes, opy);
1888 s += ea_data.bytes;
1889 if (ea_data.rip) {
1890 if (opy->segment == segment) {
1891 data -= insn_end;
1892 out(offset, segment, &data, OUT_ADDRESS,
1893 ea_data.bytes, NO_SEG, NO_SEG);
1894 } else {
1895 out(offset, segment, &data, OUT_REL4ADR,
1896 insn_end - offset, opy->segment, opy->wrt);
1897 }
1898 } else {
1899 type = OUT_ADDRESS;
1900 out(offset, segment, &data, OUT_ADDRESS,
1901 ea_data.bytes, opy->segment, opy->wrt);
1902 }
1903 break;
1904 default:
1905 /* Impossible! */
1906 errfunc(ERR_PANIC,
1907 "Invalid amount of bytes (%d) for offset?!",
1908 ea_data.bytes);
1909 break;
1910 }
1911 offset += s;
1912 }
1913 break;
1914
1915 default:
1916 errfunc(ERR_PANIC, "internal instruction table corrupt"
1917 ": instruction code \\%o (0x%02X) given", c, c);
1918 break;
1919 }
1920 }
1921 }
1922
1923 static int32_t regflag(const operand * o)
1924 {
1925 if (o->basereg < EXPR_REG_START || o->basereg >= REG_ENUM_LIMIT) {
1926 errfunc(ERR_PANIC, "invalid operand passed to regflag()");
1927 }
1928 return nasm_reg_flags[o->basereg];
1929 }
1930
1931 static int32_t regval(const operand * o)
1932 {
1933 if (o->basereg < EXPR_REG_START || o->basereg >= REG_ENUM_LIMIT) {
1934 errfunc(ERR_PANIC, "invalid operand passed to regval()");
1935 }
1936 return nasm_regvals[o->basereg];
1937 }
1938
1939 static int op_rexflags(const operand * o, int mask)
1940 {
1941 int32_t flags;
1942 int val;
1943
1944 if (o->basereg < EXPR_REG_START || o->basereg >= REG_ENUM_LIMIT) {
1945 errfunc(ERR_PANIC, "invalid operand passed to op_rexflags()");
1946 }
1947
1948 flags = nasm_reg_flags[o->basereg];
1949 val = nasm_regvals[o->basereg];
1950
1951 return rexflags(val, flags, mask);
1952 }
1953
1954 static int rexflags(int val, int32_t flags, int mask)
1955 {
1956 int rex = 0;
1957
1958 if (val >= 8)
1959 rex |= REX_B|REX_X|REX_R;
1960 if (flags & BITS64)
1961 rex |= REX_W;
1962 if (!(REG_HIGH & ~flags)) /* AH, CH, DH, BH */
1963 rex |= REX_H;
1964 else if (!(REG8 & ~flags) && val >= 4) /* SPL, BPL, SIL, DIL */
1965 rex |= REX_P;
1966
1967 return rex & mask;
1968 }
1969
1970 static int matches(const struct itemplate *itemp, insn * instruction, int bits)
1971 {
1972 int i, size[MAX_OPERANDS], asize, oprs, ret;
1973
1974 ret = 100;
1975
1976 /*
1977 * Check the opcode
1978 */
1979 if (itemp->opcode != instruction->opcode)
1980 return 0;
1981
1982 /*
1983 * Count the operands
1984 */
1985 if (itemp->operands != instruction->operands)
1986 return 0;
1987
1988 /*
1989 * Check that no spurious colons or TOs are present
1990 */
1991 for (i = 0; i < itemp->operands; i++)
1992 if (instruction->oprs[i].type & ~itemp->opd[i] & (COLON | TO))
1993 return 0;
1994
1995 /*
1996 * Process size flags
1997 */
1998 if (itemp->flags & IF_ARMASK) {
1999 memset(size, 0, sizeof size);
2000
2001 i = ((itemp->flags & IF_ARMASK) >> IF_ARSHFT) - 1;
2002
2003 switch (itemp->flags & IF_SMASK) {
2004 case IF_SB:
2005 size[i] = BITS8;
2006 break;
2007 case IF_SW:
2008 size[i] = BITS16;
2009 break;
2010 case IF_SD:
2011 size[i] = BITS32;
2012 break;
2013 case IF_SQ:
2014 size[i] = BITS64;
2015 break;
2016 case IF_SO:
2017 size[i] = BITS128;
2018 break;
2019 case IF_SY:
2020 size[i] = BITS256;
2021 break;
2022 case IF_SZ:
2023 switch (bits) {
2024 case 16:
2025 size[i] = BITS16;
2026 break;
2027 case 32:
2028 size[i] = BITS32;
2029 break;
2030 case 64:
2031 size[i] = BITS64;
2032 break;
2033 }
2034 break;
2035 default:
2036 break;
2037 }
2038 } else {
2039 asize = 0;
2040 switch (itemp->flags & IF_SMASK) {
2041 case IF_SB:
2042 asize = BITS8;
2043 break;
2044 case IF_SW:
2045 asize = BITS16;
2046 break;
2047 case IF_SD:
2048 asize = BITS32;
2049 break;
2050 case IF_SQ:
2051 asize = BITS64;
2052 break;
2053 case IF_SO:
2054 asize = BITS128;
2055 break;
2056 case IF_SY:
2057 asize = BITS256;
2058 break;
2059 case IF_SZ:
2060 switch (bits) {
2061 case 16:
2062 asize = BITS16;
2063 break;
2064 case 32:
2065 asize = BITS32;
2066 break;
2067 case 64:
2068 asize = BITS64;
2069 break;
2070 }
2071 break;
2072 default:
2073 break;
2074 }
2075 for (i = 0; i < MAX_OPERANDS; i++)
2076 size[i] = asize;
2077 }
2078
2079 /*
2080 * Check that the operand flags all match up
2081 */
2082 for (i = 0; i < itemp->operands; i++) {
2083 int32_t type = instruction->oprs[i].type;
2084 if (!(type & SIZE_MASK))
2085 type |= size[i];
2086
2087 if (itemp->opd[i] & SAME_AS) {
2088 int j = itemp->opd[i] & ~SAME_AS;
2089 if (type != instruction->oprs[j].type ||
2090 instruction->oprs[i].basereg != instruction->oprs[j].basereg)
2091 return 0;
2092 } else if (itemp->opd[i] & ~type ||
2093 ((itemp->opd[i] & SIZE_MASK) &&
2094 ((itemp->opd[i] ^ type) & SIZE_MASK))) {
2095 if ((itemp->opd[i] & ~type & ~SIZE_MASK) ||
2096 (type & SIZE_MASK))
2097 return 0;
2098 else
2099 return 1;
2100 }
2101 }
2102
2103 /*
2104 * Check operand sizes
2105 */
2106 if (itemp->flags & (IF_SM | IF_SM2)) {
2107 oprs = (itemp->flags & IF_SM2 ? 2 : itemp->operands);
2108 asize = 0;
2109 for (i = 0; i < oprs; i++) {
2110 if ((asize = itemp->opd[i] & SIZE_MASK) != 0) {
2111 int j;
2112 for (j = 0; j < oprs; j++)
2113 size[j] = asize;
2114 break;
2115 }
2116 }
2117 } else {
2118 oprs = itemp->operands;
2119 }
2120
2121 for (i = 0; i < itemp->operands; i++) {
2122 if (!(itemp->opd[i] & SIZE_MASK) &&
2123 (instruction->oprs[i].type & SIZE_MASK & ~size[i]))
2124 return 2;
2125 }
2126
2127 /*
2128 * Check template is okay at the set cpu level
2129 */
2130 if (((itemp->flags & IF_PLEVEL) > cpu))
2131 return 3;
2132
2133 /*
2134 * Verify the appropriate long mode flag.
2135 */
2136 if ((itemp->flags & (bits == 64 ? IF_NOLONG : IF_LONG)))
2137 return 4;
2138
2139 /*
2140 * Check if special handling needed for Jumps
2141 */
2142 if ((uint8_t)(itemp->code[0]) >= 0370)
2143 return 99;
2144
2145 return ret;
2146 }
2147
2148 static ea *process_ea(operand * input, ea * output, int bits,
2149 int addrbits, int rfield, int32_t rflags)
2150 {
2151 bool forw_ref = !!(input->opflags & OPFLAG_UNKNOWN);
2152
2153 output->rip = false;
2154
2155 /* REX flags for the rfield operand */
2156 output->rex |= rexflags(rfield, rflags, REX_R|REX_P|REX_W|REX_H);
2157
2158 if (!(REGISTER & ~input->type)) { /* register direct */
2159 int i;
2160 int32_t f;
2161
2162 if (input->basereg < EXPR_REG_START /* Verify as Register */
2163 || input->basereg >= REG_ENUM_LIMIT)
2164 return NULL;
2165 f = regflag(input);
2166 i = nasm_regvals[input->basereg];
2167
2168 if (REG_EA & ~f)
2169 return NULL; /* Invalid EA register */
2170
2171 output->rex |= op_rexflags(input, REX_B|REX_P|REX_W|REX_H);
2172
2173 output->sib_present = false; /* no SIB necessary */
2174 output->bytes = 0; /* no offset necessary either */
2175 output->modrm = 0xC0 | ((rfield & 7) << 3) | (i & 7);
2176 } else { /* it's a memory reference */
2177 if (input->basereg == -1
2178 && (input->indexreg == -1 || input->scale == 0)) {
2179 /* it's a pure offset */
2180 if (bits == 64 && (~input->type & IP_REL)) {
2181 int scale, index, base;
2182 output->sib_present = true;
2183 scale = 0;
2184 index = 4;
2185 base = 5;
2186 output->sib = (scale << 6) | (index << 3) | base;
2187 output->bytes = 4;
2188 output->modrm = 4 | ((rfield & 7) << 3);
2189 output->rip = false;
2190 } else {
2191 output->sib_present = false;
2192 output->bytes = (addrbits != 16 ? 4 : 2);
2193 output->modrm = (addrbits != 16 ? 5 : 6) | ((rfield & 7) << 3);
2194 output->rip = bits == 64;
2195 }
2196 } else { /* it's an indirection */
2197 int i = input->indexreg, b = input->basereg, s = input->scale;
2198 int32_t o = input->offset, seg = input->segment;
2199 int hb = input->hintbase, ht = input->hinttype;
2200 int t;
2201 int it, bt;
2202 int32_t ix, bx; /* register flags */
2203
2204 if (s == 0)
2205 i = -1; /* make this easy, at least */
2206
2207 if (i >= EXPR_REG_START && i < REG_ENUM_LIMIT) {
2208 it = nasm_regvals[i];
2209 ix = nasm_reg_flags[i];
2210 } else {
2211 it = -1;
2212 ix = 0;
2213 }
2214
2215 if (b >= EXPR_REG_START && b < REG_ENUM_LIMIT) {
2216 bt = nasm_regvals[b];
2217 bx = nasm_reg_flags[b];
2218 } else {
2219 bt = -1;
2220 bx = 0;
2221 }
2222
2223 /* check for a 32/64-bit memory reference... */
2224 if ((ix|bx) & (BITS32|BITS64)) {
2225 /* it must be a 32/64-bit memory reference. Firstly we have
2226 * to check that all registers involved are type E/Rxx. */
2227 int32_t sok = BITS32|BITS64;
2228
2229 if (it != -1) {
2230 if (!(REG64 & ~ix) || !(REG32 & ~ix))
2231 sok &= ix;
2232 else
2233 return NULL;
2234 }
2235
2236 if (bt != -1) {
2237 if (REG_GPR & ~bx)
2238 return NULL; /* Invalid register */
2239 if (~sok & bx & SIZE_MASK)
2240 return NULL; /* Invalid size */
2241 sok &= bx;
2242 }
2243
2244 /* While we're here, ensure the user didn't specify
2245 WORD or QWORD. */
2246 if (input->disp_size == 16 || input->disp_size == 64)
2247 return NULL;
2248
2249 if (addrbits == 16 ||
2250 (addrbits == 32 && !(sok & BITS32)) ||
2251 (addrbits == 64 && !(sok & BITS64)))
2252 return NULL;
2253
2254 /* now reorganize base/index */
2255 if (s == 1 && bt != it && bt != -1 && it != -1 &&
2256 ((hb == b && ht == EAH_NOTBASE)
2257 || (hb == i && ht == EAH_MAKEBASE))) {
2258 /* swap if hints say so */
2259 t = bt, bt = it, it = t;
2260 t = bx, bx = ix, ix = t;
2261 }
2262 if (bt == it) /* convert EAX+2*EAX to 3*EAX */
2263 bt = -1, bx = 0, s++;
2264 if (bt == -1 && s == 1 && !(hb == it && ht == EAH_NOTBASE)) {
2265 /* make single reg base, unless hint */
2266 bt = it, bx = ix, it = -1, ix = 0;
2267 }
2268 if (((s == 2 && it != REG_NUM_ESP
2269 && !(input->eaflags & EAF_TIMESTWO)) || s == 3
2270 || s == 5 || s == 9) && bt == -1)
2271 bt = it, bx = ix, s--; /* convert 3*EAX to EAX+2*EAX */
2272 if (it == -1 && (bt & 7) != REG_NUM_ESP
2273 && (input->eaflags & EAF_TIMESTWO))
2274 it = bt, ix = bx, bt = -1, bx = 0, s = 1;
2275 /* convert [NOSPLIT EAX] to sib format with 0x0 displacement */
2276 if (s == 1 && it == REG_NUM_ESP) {
2277 /* swap ESP into base if scale is 1 */
2278 t = it, it = bt, bt = t;
2279 t = ix, ix = bx, bx = t;
2280 }
2281 if (it == REG_NUM_ESP
2282 || (s != 1 && s != 2 && s != 4 && s != 8 && it != -1))
2283 return NULL; /* wrong, for various reasons */
2284
2285 output->rex |= rexflags(it, ix, REX_X);
2286 output->rex |= rexflags(bt, bx, REX_B);
2287
2288 if (it == -1 && (bt & 7) != REG_NUM_ESP) {
2289 /* no SIB needed */
2290 int mod, rm;
2291
2292 if (bt == -1) {
2293 rm = 5;
2294 mod = 0;
2295 } else {
2296 rm = (bt & 7);
2297 if (rm != REG_NUM_EBP && o == 0 &&
2298 seg == NO_SEG && !forw_ref &&
2299 !(input->eaflags &
2300 (EAF_BYTEOFFS | EAF_WORDOFFS)))
2301 mod = 0;
2302 else if (input->eaflags & EAF_BYTEOFFS ||
2303 (o >= -128 && o <= 127 && seg == NO_SEG
2304 && !forw_ref
2305 && !(input->eaflags & EAF_WORDOFFS)))
2306 mod = 1;
2307 else
2308 mod = 2;
2309 }
2310
2311 output->sib_present = false;
2312 output->bytes = (bt == -1 || mod == 2 ? 4 : mod);
2313 output->modrm = (mod << 6) | ((rfield & 7) << 3) | rm;
2314 } else {
2315 /* we need a SIB */
2316 int mod, scale, index, base;
2317
2318 if (it == -1)
2319 index = 4, s = 1;
2320 else
2321 index = (it & 7);
2322
2323 switch (s) {
2324 case 1:
2325 scale = 0;
2326 break;
2327 case 2:
2328 scale = 1;
2329 break;
2330 case 4:
2331 scale = 2;
2332 break;
2333 case 8:
2334 scale = 3;
2335 break;
2336 default: /* then what the smeg is it? */
2337 return NULL; /* panic */
2338 }
2339
2340 if (bt == -1) {
2341 base = 5;
2342 mod = 0;
2343 } else {
2344 base = (bt & 7);
2345 if (base != REG_NUM_EBP && o == 0 &&
2346 seg == NO_SEG && !forw_ref &&
2347 !(input->eaflags &
2348 (EAF_BYTEOFFS | EAF_WORDOFFS)))
2349 mod = 0;
2350 else if (input->eaflags & EAF_BYTEOFFS ||
2351 (o >= -128 && o <= 127 && seg == NO_SEG
2352 && !forw_ref
2353 && !(input->eaflags & EAF_WORDOFFS)))
2354 mod = 1;
2355 else
2356 mod = 2;
2357 }
2358
2359 output->sib_present = true;
2360 output->bytes = (bt == -1 || mod == 2 ? 4 : mod);
2361 output->modrm = (mod << 6) | ((rfield & 7) << 3) | 4;
2362 output->sib = (scale << 6) | (index << 3) | base;
2363 }
2364 } else { /* it's 16-bit */
2365 int mod, rm;
2366
2367 /* check for 64-bit long mode */
2368 if (addrbits == 64)
2369 return NULL;
2370
2371 /* check all registers are BX, BP, SI or DI */
2372 if ((b != -1 && b != R_BP && b != R_BX && b != R_SI
2373 && b != R_DI) || (i != -1 && i != R_BP && i != R_BX
2374 && i != R_SI && i != R_DI))
2375 return NULL;
2376
2377 /* ensure the user didn't specify DWORD/QWORD */
2378 if (input->disp_size == 32 || input->disp_size == 64)
2379 return NULL;
2380
2381 if (s != 1 && i != -1)
2382 return NULL; /* no can do, in 16-bit EA */
2383 if (b == -1 && i != -1) {
2384 int tmp = b;
2385 b = i;
2386 i = tmp;
2387 } /* swap */
2388 if ((b == R_SI || b == R_DI) && i != -1) {
2389 int tmp = b;
2390 b = i;
2391 i = tmp;
2392 }
2393 /* have BX/BP as base, SI/DI index */
2394 if (b == i)
2395 return NULL; /* shouldn't ever happen, in theory */
2396 if (i != -1 && b != -1 &&
2397 (i == R_BP || i == R_BX || b == R_SI || b == R_DI))
2398 return NULL; /* invalid combinations */
2399 if (b == -1) /* pure offset: handled above */
2400 return NULL; /* so if it gets to here, panic! */
2401
2402 rm = -1;
2403 if (i != -1)
2404 switch (i * 256 + b) {
2405 case R_SI * 256 + R_BX:
2406 rm = 0;
2407 break;
2408 case R_DI * 256 + R_BX:
2409 rm = 1;
2410 break;
2411 case R_SI * 256 + R_BP:
2412 rm = 2;
2413 break;
2414 case R_DI * 256 + R_BP:
2415 rm = 3;
2416 break;
2417 } else
2418 switch (b) {
2419 case R_SI:
2420 rm = 4;
2421 break;
2422 case R_DI:
2423 rm = 5;
2424 break;
2425 case R_BP:
2426 rm = 6;
2427 break;
2428 case R_BX:
2429 rm = 7;
2430 break;
2431 }
2432 if (rm == -1) /* can't happen, in theory */
2433 return NULL; /* so panic if it does */
2434
2435 if (o == 0 && seg == NO_SEG && !forw_ref && rm != 6 &&
2436 !(input->eaflags & (EAF_BYTEOFFS | EAF_WORDOFFS)))
2437 mod = 0;
2438 else if (input->eaflags & EAF_BYTEOFFS ||
2439 (o >= -128 && o <= 127 && seg == NO_SEG
2440 && !forw_ref
2441 && !(input->eaflags & EAF_WORDOFFS)))
2442 mod = 1;
2443 else
2444 mod = 2;
2445
2446 output->sib_present = false; /* no SIB - it's 16-bit */
2447 output->bytes = mod; /* bytes of offset needed */
2448 output->modrm = (mod << 6) | ((rfield & 7) << 3) | rm;
2449 }
2450 }
2451 }
2452
2453 output->size = 1 + output->sib_present + output->bytes;
2454 return output;
2455 }
2456
2457 static void add_asp(insn *ins, int addrbits)
2458 {
2459 int j, valid;
2460 int defdisp;
2461
2462 valid = (addrbits == 64) ? 64|32 : 32|16;
2463
2464 switch (ins->prefixes[PPS_ASIZE]) {
2465 case P_A16:
2466 valid &= 16;
2467 break;
2468 case P_A32:
2469 valid &= 32;
2470 break;
2471 case P_A64:
2472 valid &= 64;
2473 break;
2474 case P_ASP:
2475 valid &= (addrbits == 32) ? 16 : 32;
2476 break;
2477 default:
2478 break;
2479 }
2480
2481 for (j = 0; j < ins->operands; j++) {
2482 if (!(MEMORY & ~ins->oprs[j].type)) {
2483 int32_t i, b;
2484
2485 /* Verify as Register */
2486 if (ins->oprs[j].indexreg < EXPR_REG_START
2487 || ins->oprs[j].indexreg >= REG_ENUM_LIMIT)
2488 i = 0;
2489 else
2490 i = nasm_reg_flags[ins->oprs[j].indexreg];
2491
2492 /* Verify as Register */
2493 if (ins->oprs[j].basereg < EXPR_REG_START
2494 || ins->oprs[j].basereg >= REG_ENUM_LIMIT)
2495 b = 0;
2496 else
2497 b = nasm_reg_flags[ins->oprs[j].basereg];
2498
2499 if (ins->oprs[j].scale == 0)
2500 i = 0;
2501
2502 if (!i && !b) {
2503 int ds = ins->oprs[j].disp_size;
2504 if ((addrbits != 64 && ds > 8) ||
2505 (addrbits == 64 && ds == 16))
2506 valid &= ds;
2507 } else {
2508 if (!(REG16 & ~b))
2509 valid &= 16;
2510 if (!(REG32 & ~b))
2511 valid &= 32;
2512 if (!(REG64 & ~b))
2513 valid &= 64;
2514
2515 if (!(REG16 & ~i))
2516 valid &= 16;
2517 if (!(REG32 & ~i))
2518 valid &= 32;
2519 if (!(REG64 & ~i))
2520 valid &= 64;
2521 }
2522 }
2523 }
2524
2525 if (valid & addrbits) {
2526 ins->addr_size = addrbits;
2527 } else if (valid & ((addrbits == 32) ? 16 : 32)) {
2528 /* Add an address size prefix */
2529 enum prefixes pref = (addrbits == 32) ? P_A16 : P_A32;
2530 ins->prefixes[PPS_ASIZE] = pref;
2531 ins->addr_size = (addrbits == 32) ? 16 : 32;
2532 } else {
2533 /* Impossible... */
2534 errfunc(ERR_NONFATAL, "impossible combination of address sizes");
2535 ins->addr_size = addrbits; /* Error recovery */
2536 }
2537
2538 defdisp = ins->addr_size == 16 ? 16 : 32;
2539
2540 for (j = 0; j < ins->operands; j++) {
2541 if (!(MEM_OFFS & ~ins->oprs[j].type) &&
2542 (ins->oprs[j].disp_size ? ins->oprs[j].disp_size : defdisp)
2543 != ins->addr_size) {
2544 /* mem_offs sizes must match the address size; if not,
2545 strip the MEM_OFFS bit and match only EA instructions */
2546 ins->oprs[j].type &= ~(MEM_OFFS & ~MEMORY);
2547 }
2548 }
2549 }
Adding AVX-512 features