1 /* disasm.c where all the _work_ gets done in the Netwide Disassembler
3 * The Netwide Assembler is copyright (C) 1996 Simon Tatham and
4 * Julian Hall. All rights reserved. The software is
5 * redistributable under the licence given in the file "Licence"
6 * distributed in the NASM archive.
8 * initial version 27/iii/95 by Simon Tatham
26 * Flags that go into the `segment' field of `insn' structures
29 #define SEG_RELATIVE 1
36 #define SEG_SIGNED 128
45 uint8_t osize
; /* Operand size */
46 uint8_t asize
; /* Address size */
47 uint8_t osp
; /* Operand size prefix present */
48 uint8_t asp
; /* Address size prefix present */
49 uint8_t rep
; /* Rep prefix present */
50 uint8_t seg
; /* Segment override prefix present */
51 uint8_t lock
; /* Lock prefix present */
52 uint8_t rex
; /* Rex prefix present */
55 #define getu8(x) (*(uint8_t *)(x))
57 /* Littleendian CPU which can handle unaligned references */
58 #define getu16(x) (*(uint16_t *)(x))
59 #define getu32(x) (*(uint32_t *)(x))
60 #define getu64(x) (*(uint64_t *)(x))
62 static uint16_t getu16(uint8_t *data
)
64 return (uint16_t)data
[0] + ((uint16_t)data
[1] << 8);
66 static uint32_t getu32(uint8_t *data
)
68 return (uint32_t)getu16(data
) + ((uint32_t)getu16(data
+2) << 16);
70 static uint64_t getu64(uint8_t *data
)
72 return (uint64_t)getu32(data
) + ((uint64_t)getu32(data
+4) << 32);
76 #define gets8(x) ((int8_t)getu8(x))
77 #define gets16(x) ((int16_t)getu16(x))
78 #define gets32(x) ((int32_t)getu32(x))
79 #define gets64(x) ((int64_t)getu64(x))
81 /* Important: regval must already have been adjusted for rex extensions */
82 static enum reg_enum
whichreg(int32_t regflags
, int regval
, int rex
)
84 if (!(regflags
& (REGISTER
|REGMEM
)))
85 return 0; /* Registers not permissible?! */
89 if (!(REG_AL
& ~regflags
))
91 if (!(REG_AX
& ~regflags
))
93 if (!(REG_EAX
& ~regflags
))
95 if (!(REG_RAX
& ~regflags
))
97 if (!(REG_DL
& ~regflags
))
99 if (!(REG_DX
& ~regflags
))
101 if (!(REG_EDX
& ~regflags
))
103 if (!(REG_RDX
& ~regflags
))
105 if (!(REG_CL
& ~regflags
))
107 if (!(REG_CX
& ~regflags
))
109 if (!(REG_ECX
& ~regflags
))
111 if (!(REG_RCX
& ~regflags
))
113 if (!(FPU0
& ~regflags
))
115 if (!(REG_CS
& ~regflags
))
116 return (regval
== 1) ? R_CS
: 0;
117 if (!(REG_DESS
& ~regflags
))
118 return (regval
== 0 || regval
== 2
119 || regval
== 3 ? rd_sreg
[regval
] : 0);
120 if (!(REG_FSGS
& ~regflags
))
121 return (regval
== 4 || regval
== 5 ? rd_sreg
[regval
] : 0);
122 if (!(REG_SEG67
& ~regflags
))
123 return (regval
== 6 || regval
== 7 ? rd_sreg
[regval
] : 0);
125 /* All the entries below look up regval in an 16-entry array */
126 if (regval
< 0 || regval
> 15)
129 if (!(REG8
& ~regflags
)) {
131 return rd_reg8_rex
[regval
];
133 return rd_reg8
[regval
];
135 if (!(REG16
& ~regflags
))
136 return rd_reg16
[regval
];
137 if (!(REG32
& ~regflags
))
138 return rd_reg32
[regval
];
139 if (!(REG64
& ~regflags
))
140 return rd_reg64
[regval
];
141 if (!(REG_SREG
& ~regflags
))
142 return rd_sreg
[regval
& 7]; /* Ignore REX */
143 if (!(REG_CREG
& ~regflags
))
144 return rd_creg
[regval
];
145 if (!(REG_DREG
& ~regflags
))
146 return rd_dreg
[regval
];
147 if (!(REG_TREG
& ~regflags
)) {
149 return 0; /* TR registers are ill-defined with rex */
150 return rd_treg
[regval
];
152 if (!(FPUREG
& ~regflags
))
153 return rd_fpureg
[regval
& 7]; /* Ignore REX */
154 if (!(MMXREG
& ~regflags
))
155 return rd_mmxreg
[regval
& 7]; /* Ignore REX */
156 if (!(XMMREG
& ~regflags
))
157 return rd_xmmreg
[regval
];
162 static const char *whichcond(int condval
)
164 static int conds
[] = {
165 C_O
, C_NO
, C_C
, C_NC
, C_Z
, C_NZ
, C_NA
, C_A
,
166 C_S
, C_NS
, C_PE
, C_PO
, C_L
, C_NL
, C_NG
, C_G
168 return conditions
[conds
[condval
]];
172 * Process a DREX suffix
174 static uint8_t *do_drex(uint8_t *data
, insn
*ins
)
176 uint8_t drex
= *data
++;
177 operand
*dst
= &ins
->oprs
[ins
->drexdst
];
179 if ((drex
& 8) != ((ins
->rex
& REX_OC
) ? 8 : 0))
180 return NULL
; /* OC0 mismatch */
181 ins
->rex
= (ins
->rex
& ~7) | (drex
& 7);
183 dst
->segment
= SEG_RMREG
;
184 dst
->basereg
= drex
>> 4;
190 * Process an effective address (ModRM) specification.
192 static uint8_t *do_ea(uint8_t *data
, int modrm
, int asize
,
193 int segsize
, operand
* op
, insn
*ins
)
195 int mod
, rm
, scale
, index
, base
;
199 mod
= (modrm
>> 6) & 03;
202 if (mod
!= 3 && rm
== 4 && asize
!= 16)
205 if (ins
->rex
& REX_D
) {
206 data
= do_drex(data
, ins
);
212 if (mod
== 3) { /* pure register version */
213 op
->basereg
= rm
+(rex
& REX_B
? 8 : 0);
214 op
->segment
|= SEG_RMREG
;
223 * <mod> specifies the displacement size (none, byte or
224 * word), and <rm> specifies the register combination.
225 * Exception: mod=0,rm=6 does not specify [BP] as one might
226 * expect, but instead specifies [disp16].
228 op
->indexreg
= op
->basereg
= -1;
229 op
->scale
= 1; /* always, in 16 bits */
260 if (rm
== 6 && mod
== 0) { /* special case */
264 mod
= 2; /* fake disp16 */
268 op
->segment
|= SEG_NODISP
;
271 op
->segment
|= SEG_DISP8
;
272 op
->offset
= (int8_t)*data
++;
275 op
->segment
|= SEG_DISP16
;
276 op
->offset
= *data
++;
277 op
->offset
|= ((unsigned)*data
++) << 8;
283 * Once again, <mod> specifies displacement size (this time
284 * none, byte or *dword*), while <rm> specifies the base
285 * register. Again, [EBP] is missing, replaced by a pure
286 * disp32 (this time that's mod=0,rm=*5*) in 32-bit mode,
287 * and RIP-relative addressing in 64-bit mode.
290 * indicates not a single base register, but instead the
291 * presence of a SIB byte...
293 int a64
= asize
== 64;
298 op
->basereg
= rd_reg64
[rm
| ((rex
& REX_B
) ? 8 : 0)];
300 op
->basereg
= rd_reg32
[rm
| ((rex
& REX_B
) ? 8 : 0)];
302 if (rm
== 5 && mod
== 0) {
304 op
->eaflags
|= EAF_REL
;
305 op
->segment
|= SEG_RELATIVE
;
306 mod
= 2; /* fake disp32 */
310 op
->disp_size
= asize
;
313 mod
= 2; /* fake disp32 */
316 if (rm
== 4) { /* process SIB */
317 scale
= (sib
>> 6) & 03;
318 index
= (sib
>> 3) & 07;
321 op
->scale
= 1 << scale
;
324 op
->indexreg
= -1; /* ESP/RSP/R12 cannot be an index */
326 op
->indexreg
= rd_reg64
[index
| ((rex
& REX_X
) ? 8 : 0)];
328 op
->indexreg
= rd_reg64
[index
| ((rex
& REX_X
) ? 8 : 0)];
330 if (base
== 5 && mod
== 0) {
332 mod
= 2; /* Fake disp32 */
334 op
->basereg
= rd_reg64
[base
| ((rex
& REX_B
) ? 8 : 0)];
336 op
->basereg
= rd_reg32
[base
| ((rex
& REX_B
) ? 8 : 0)];
344 op
->segment
|= SEG_NODISP
;
347 op
->segment
|= SEG_DISP8
;
348 op
->offset
= gets8(data
);
352 op
->segment
|= SEG_DISP32
;
353 op
->offset
= getu32(data
);
362 * Determine whether the instruction template in t corresponds to the data
363 * stream in data. Return the number of bytes matched if so.
365 #define case4(x) case (x): case (x)+1: case (x)+2: case (x)+3
367 static int matches(const struct itemplate
*t
, uint8_t *data
,
368 const struct prefix_info
*prefix
, int segsize
, insn
*ins
)
370 uint8_t *r
= (uint8_t *)(t
->code
);
371 uint8_t *origdata
= data
;
372 bool a_used
= false, o_used
= false;
373 enum prefixes drep
= 0;
374 uint8_t lock
= prefix
->lock
;
375 int osize
= prefix
->osize
;
376 int asize
= prefix
->asize
;
380 for (i
= 0; i
< MAX_OPERANDS
; i
++) {
381 ins
->oprs
[i
].segment
= ins
->oprs
[i
].disp_size
=
382 (segsize
== 64 ? SEG_64BIT
: segsize
== 32 ? SEG_32BIT
: 0);
385 ins
->rex
= prefix
->rex
;
386 memset(ins
->prefixes
, 0, sizeof ins
->prefixes
);
388 if (t
->flags
& (segsize
== 64 ? IF_NOLONG
: IF_LONG
))
391 if (prefix
->rep
== 0xF2)
393 else if (prefix
->rep
== 0xF3)
396 while ((c
= *r
++) != 0) {
397 opx
= &ins
->oprs
[c
& 3];
411 ins
->oprs
[0].basereg
= 0;
414 ins
->oprs
[0].basereg
= 2;
417 ins
->oprs
[0].basereg
= 3;
427 ins
->oprs
[0].basereg
= 4;
430 ins
->oprs
[0].basereg
= 5;
440 ins
->oprs
[0].basereg
= 0;
443 ins
->oprs
[0].basereg
= 1;
446 ins
->oprs
[0].basereg
= 2;
449 ins
->oprs
[0].basereg
= 3;
459 ins
->oprs
[0].basereg
= 4;
462 ins
->oprs
[0].basereg
= 5;
471 int t
= *r
++, d
= *data
++;
472 if (d
< t
|| d
> t
+ 7)
475 opx
->basereg
= (d
-t
)+
476 (ins
->rex
& REX_B
? 8 : 0);
477 opx
->segment
|= SEG_RMREG
;
483 opx
->offset
= (int8_t)*data
++;
484 opx
->segment
|= SEG_SIGNED
;
488 opx
->offset
= *data
++;
492 opx
->offset
= *data
++;
496 opx
->offset
= getu16(data
);
502 opx
->offset
= getu32(data
);
505 opx
->offset
= getu16(data
);
508 if (segsize
!= asize
)
509 opx
->disp_size
= asize
;
513 opx
->offset
= getu32(data
);
520 opx
->offset
= getu16(data
);
526 opx
->offset
= getu32(data
);
532 opx
->offset
= getu64(data
);
540 opx
->offset
= gets8(data
++);
541 opx
->segment
|= SEG_RELATIVE
;
545 opx
->offset
= getu64(data
);
550 opx
->offset
= gets16(data
);
552 opx
->segment
|= SEG_RELATIVE
;
553 opx
->segment
&= ~SEG_32BIT
;
557 opx
->segment
|= SEG_RELATIVE
;
559 opx
->offset
= getu16(data
);
561 opx
->segment
&= ~(SEG_32BIT
|SEG_64BIT
);
562 } else if (osize
== 32) {
563 opx
->offset
= getu32(data
);
565 opx
->segment
&= ~SEG_64BIT
;
566 opx
->segment
|= SEG_32BIT
;
568 if (segsize
!= osize
) {
570 (opx
->type
& ~SIZE_MASK
)
571 | ((osize
== 16) ? BITS16
: BITS32
);
576 opx
->offset
= getu32(data
);
578 opx
->segment
|= SEG_32BIT
| SEG_RELATIVE
;
587 opx
->segment
|= SEG_RMREG
;
588 data
= do_ea(data
, modrm
, asize
, segsize
,
589 &ins
->oprs
[(c
>> 3) & 3], ins
);
592 opx
->basereg
= ((modrm
>> 3)&7)+
593 (ins
->rex
& REX_R
? 8 : 0);
598 opx
->offset
= getu16(data
);
603 opx
->offset
= getu32(data
);
609 ins
->drexdst
= c
& 3;
613 ins
->rex
|= REX_D
|REX_OC
;
614 ins
->drexdst
= c
& 3;
623 data
= do_drex(data
, ins
);
638 if (((modrm
>> 3) & 07) != (c
& 07))
639 return false; /* spare field doesn't match up */
640 data
= do_ea(data
, modrm
, asize
, segsize
,
641 &ins
->oprs
[(c
>> 3) & 07], ins
);
662 if (asize
!= segsize
)
676 if (prefix
->rex
& REX_B
)
681 if (prefix
->rex
& REX_X
)
686 if (prefix
->rex
& REX_R
)
691 if (prefix
->rex
& REX_W
)
710 if (osize
!= (segsize
== 16) ? 16 : 32)
717 ins
->rex
|= REX_W
; /* 64-bit only instruction */
723 if (!(ins
->rex
& (REX_P
|REX_W
)) || osize
!= 64)
730 int t
= *r
++, d
= *data
++;
731 if (d
< t
|| d
> t
+ 15)
734 ins
->condition
= d
- t
;
744 if (prefix
->rep
!= 0xF2)
749 if (prefix
->rep
!= 0xF3)
792 return false; /* Unknown code */
796 /* REX cannot be combined with DREX */
797 if ((ins
->rex
& REX_D
) && (prefix
->rex
))
801 * Check for unused rep or a/o prefixes.
803 for (i
= 0; i
< t
->operands
; i
++) {
804 if (ins
->oprs
[i
].segment
!= SEG_RMREG
)
809 if (ins
->prefixes
[PPS_LREP
])
811 ins
->prefixes
[PPS_LREP
] = P_LOCK
;
814 if (ins
->prefixes
[PPS_LREP
])
816 ins
->prefixes
[PPS_LREP
] = drep
;
819 if (osize
!= ((segsize
== 16) ? 16 : 32)) {
820 enum prefixes pfx
= 0;
834 if (ins
->prefixes
[PPS_OSIZE
])
836 ins
->prefixes
[PPS_OSIZE
] = pfx
;
839 if (!a_used
&& asize
!= segsize
) {
840 if (ins
->prefixes
[PPS_ASIZE
])
842 ins
->prefixes
[PPS_ASIZE
] = asize
== 16 ? P_A16
: P_A32
;
845 /* Fix: check for redundant REX prefixes */
847 return data
- origdata
;
850 int32_t disasm(uint8_t *data
, char *output
, int outbufsize
, int segsize
,
851 int32_t offset
, int autosync
, uint32_t prefer
)
853 const struct itemplate
* const *p
, * const *best_p
;
854 const struct disasm_index
*ix
;
856 int length
, best_length
= 0;
858 int i
, slen
, colon
, n
;
862 uint32_t goodness
, best
;
864 struct prefix_info prefix
;
867 memset(&ins
, 0, sizeof ins
);
872 memset(&prefix
, 0, sizeof prefix
);
873 prefix
.asize
= segsize
;
874 prefix
.osize
= (segsize
== 64) ? 32 : segsize
;
878 for (end_prefix
= false; !end_prefix
; ) {
882 prefix
.rep
= *data
++;
885 prefix
.lock
= *data
++;
888 segover
= "cs", prefix
.seg
= *data
++;
891 segover
= "ss", prefix
.seg
= *data
++;
894 segover
= "ds", prefix
.seg
= *data
++;
897 segover
= "es", prefix
.seg
= *data
++;
900 segover
= "fs", prefix
.seg
= *data
++;
903 segover
= "gs", prefix
.seg
= *data
++;
906 prefix
.osize
= (segsize
== 16) ? 32 : 16;
907 prefix
.osp
= *data
++;
910 prefix
.asize
= (segsize
== 32) ? 16 : 32;
911 prefix
.asp
= *data
++;
914 if (segsize
== 64 && (*data
& 0xf0) == REX_P
) {
915 prefix
.rex
= *data
++;
916 if (prefix
.rex
& REX_W
)
925 best
= -1; /* Worst possible */
931 while (ix
->n
== -1) {
932 ix
= (const struct disasm_index
*)ix
->p
+ *dp
++;
935 p
= (const struct itemplate
* const *)ix
->p
;
936 for (n
= ix
->n
; n
; n
--, p
++) {
937 if ((length
= matches(*p
, data
, &prefix
, segsize
, &tmp_ins
))) {
940 * Final check to make sure the types of r/m match up.
941 * XXX: Need to make sure this is actually correct.
943 for (i
= 0; i
< (*p
)->operands
; i
++) {
944 if (!((*p
)->opd
[i
] & SAME_AS
) &&
946 /* If it's a mem-only EA but we have a
948 ((tmp_ins
.oprs
[i
].segment
& SEG_RMREG
) &&
949 !(MEMORY
& ~(*p
)->opd
[i
])) ||
950 /* If it's a reg-only EA but we have a memory
952 (!(tmp_ins
.oprs
[i
].segment
& SEG_RMREG
) &&
953 !(REG_EA
& ~(*p
)->opd
[i
]) &&
954 !((*p
)->opd
[i
] & REG_SMASK
)) ||
955 /* Register type mismatch (eg FS vs REG_DESS):
957 ((((*p
)->opd
[i
] & (REGISTER
| FPUREG
)) ||
958 (tmp_ins
.oprs
[i
].segment
& SEG_RMREG
)) &&
959 !whichreg((*p
)->opd
[i
],
960 tmp_ins
.oprs
[i
].basereg
, tmp_ins
.rex
))
968 * Note: we always prefer instructions which incorporate
969 * prefixes in the instructions themselves. This is to allow
970 * e.g. PAUSE to be preferred to REP NOP, and deal with
971 * MMX/SSE instructions where prefixes are used to select
972 * between MMX and SSE register sets or outright opcode
977 goodness
= ((*p
)->flags
& IF_PFMASK
) ^ prefer
;
979 for (i
= 0; i
< MAXPREFIX
; i
++)
980 if (tmp_ins
.prefixes
[i
])
982 if (nprefix
< best_pref
||
983 (nprefix
== best_pref
&& goodness
< best
)) {
984 /* This is the best one found so far */
988 best_length
= length
;
996 return 0; /* no instruction was matched */
998 /* Pick the best match */
1000 length
= best_length
;
1004 /* TODO: snprintf returns the value that the string would have if
1005 * the buffer were long enough, and not the actual length of
1006 * the returned string, so each instance of using the return
1007 * value of snprintf should actually be checked to assure that
1008 * the return value is "sane." Maybe a macro wrapper could
1009 * be used for that purpose.
1011 for (i
= 0; i
< MAXPREFIX
; i
++)
1012 switch (ins
.prefixes
[i
]) {
1014 slen
+= snprintf(output
+ slen
, outbufsize
- slen
, "lock ");
1017 slen
+= snprintf(output
+ slen
, outbufsize
- slen
, "rep ");
1020 slen
+= snprintf(output
+ slen
, outbufsize
- slen
, "repe ");
1023 slen
+= snprintf(output
+ slen
, outbufsize
- slen
, "repne ");
1026 slen
+= snprintf(output
+ slen
, outbufsize
- slen
, "a16 ");
1029 slen
+= snprintf(output
+ slen
, outbufsize
- slen
, "a32 ");
1032 slen
+= snprintf(output
+ slen
, outbufsize
- slen
, "a64 ");
1035 slen
+= snprintf(output
+ slen
, outbufsize
- slen
, "o16 ");
1038 slen
+= snprintf(output
+ slen
, outbufsize
- slen
, "o32 ");
1041 slen
+= snprintf(output
+ slen
, outbufsize
- slen
, "o64 ");
1047 for (i
= 0; i
< (int)elements(ico
); i
++)
1048 if ((*p
)->opcode
== ico
[i
]) {
1050 snprintf(output
+ slen
, outbufsize
- slen
, "%s%s", icn
[i
],
1051 whichcond(ins
.condition
));
1054 if (i
>= (int)elements(ico
))
1056 snprintf(output
+ slen
, outbufsize
- slen
, "%s",
1057 insn_names
[(*p
)->opcode
]);
1059 length
+= data
- origdata
; /* fix up for prefixes */
1060 for (i
= 0; i
< (*p
)->operands
; i
++) {
1061 opflags_t t
= (*p
)->opd
[i
];
1062 const operand
*o
= &ins
.oprs
[i
];
1066 o
= &ins
.oprs
[t
& ~SAME_AS
];
1067 t
= (*p
)->opd
[t
& ~SAME_AS
];
1070 output
[slen
++] = (colon
? ':' : i
== 0 ? ' ' : ',');
1073 if (o
->segment
& SEG_RELATIVE
) {
1074 offs
+= offset
+ length
;
1076 * sort out wraparound
1078 if (!(o
->segment
& (SEG_32BIT
|SEG_64BIT
)))
1081 * add sync marker, if autosync is on
1092 if ((t
& (REGISTER
| FPUREG
)) ||
1093 (o
->segment
& SEG_RMREG
)) {
1095 reg
= whichreg(t
, o
->basereg
, ins
.rex
);
1097 slen
+= snprintf(output
+ slen
, outbufsize
- slen
, "to ");
1098 slen
+= snprintf(output
+ slen
, outbufsize
- slen
, "%s",
1099 reg_names
[reg
- EXPR_REG_START
]);
1100 } else if (!(UNITY
& ~t
)) {
1101 output
[slen
++] = '1';
1102 } else if (t
& IMMEDIATE
) {
1105 snprintf(output
+ slen
, outbufsize
- slen
, "byte ");
1106 if (o
->segment
& SEG_SIGNED
) {
1109 output
[slen
++] = '-';
1111 output
[slen
++] = '+';
1113 } else if (t
& BITS16
) {
1115 snprintf(output
+ slen
, outbufsize
- slen
, "word ");
1116 } else if (t
& BITS32
) {
1118 snprintf(output
+ slen
, outbufsize
- slen
, "dword ");
1119 } else if (t
& BITS64
) {
1121 snprintf(output
+ slen
, outbufsize
- slen
, "qword ");
1122 } else if (t
& NEAR
) {
1124 snprintf(output
+ slen
, outbufsize
- slen
, "near ");
1125 } else if (t
& SHORT
) {
1127 snprintf(output
+ slen
, outbufsize
- slen
, "short ");
1130 snprintf(output
+ slen
, outbufsize
- slen
, "0x%"PRIx64
"",
1132 } else if (!(MEM_OFFS
& ~t
)) {
1134 snprintf(output
+ slen
, outbufsize
- slen
,
1135 "[%s%s%s0x%"PRIx64
"]",
1136 (segover
? segover
: ""),
1137 (segover
? ":" : ""),
1138 (o
->disp_size
== 64 ? "qword " :
1139 o
->disp_size
== 32 ? "dword " :
1140 o
->disp_size
== 16 ? "word " : ""), offs
);
1142 } else if (!(REGMEM
& ~t
)) {
1143 int started
= false;
1146 snprintf(output
+ slen
, outbufsize
- slen
, "byte ");
1149 snprintf(output
+ slen
, outbufsize
- slen
, "word ");
1152 snprintf(output
+ slen
, outbufsize
- slen
, "dword ");
1155 snprintf(output
+ slen
, outbufsize
- slen
, "qword ");
1158 snprintf(output
+ slen
, outbufsize
- slen
, "tword ");
1161 snprintf(output
+ slen
, outbufsize
- slen
, "oword ");
1163 slen
+= snprintf(output
+ slen
, outbufsize
- slen
, "far ");
1166 snprintf(output
+ slen
, outbufsize
- slen
, "near ");
1167 output
[slen
++] = '[';
1169 slen
+= snprintf(output
+ slen
, outbufsize
- slen
, "%s",
1170 (o
->disp_size
== 64 ? "qword " :
1171 o
->disp_size
== 32 ? "dword " :
1172 o
->disp_size
== 16 ? "word " :
1174 if (o
->eaflags
& EAF_REL
)
1175 slen
+= snprintf(output
+ slen
, outbufsize
- slen
, "rel ");
1178 snprintf(output
+ slen
, outbufsize
- slen
, "%s:",
1182 if (o
->basereg
!= -1) {
1183 slen
+= snprintf(output
+ slen
, outbufsize
- slen
, "%s",
1184 reg_names
[(o
->basereg
-
1188 if (o
->indexreg
!= -1) {
1190 output
[slen
++] = '+';
1191 slen
+= snprintf(output
+ slen
, outbufsize
- slen
, "%s",
1192 reg_names
[(o
->indexreg
-
1196 snprintf(output
+ slen
, outbufsize
- slen
, "*%d",
1202 if (o
->segment
& SEG_DISP8
) {
1204 uint8_t offset
= offs
;
1205 if ((int8_t)offset
< 0) {
1212 snprintf(output
+ slen
, outbufsize
- slen
, "%s0x%"PRIx8
"",
1214 } else if (o
->segment
& SEG_DISP16
) {
1216 uint16_t offset
= offs
;
1217 if ((int16_t)offset
< 0 && started
) {
1221 prefix
= started
? "+" : "";
1224 snprintf(output
+ slen
, outbufsize
- slen
,
1225 "%s0x%"PRIx16
"", prefix
, offset
);
1226 } else if (o
->segment
& SEG_DISP32
) {
1227 if (prefix
.asize
== 64) {
1229 uint64_t offset
= (int64_t)(int32_t)offs
;
1230 if ((int32_t)offs
< 0 && started
) {
1234 prefix
= started
? "+" : "";
1237 snprintf(output
+ slen
, outbufsize
- slen
,
1238 "%s0x%"PRIx64
"", prefix
, offset
);
1241 uint32_t offset
= offs
;
1242 if ((int32_t) offset
< 0 && started
) {
1246 prefix
= started
? "+" : "";
1249 snprintf(output
+ slen
, outbufsize
- slen
,
1250 "%s0x%"PRIx32
"", prefix
, offset
);
1253 output
[slen
++] = ']';
1256 snprintf(output
+ slen
, outbufsize
- slen
, "<operand%d>",
1260 output
[slen
] = '\0';
1261 if (segover
) { /* unused segment override */
1263 int count
= slen
+ 1;
1265 p
[count
+ 3] = p
[count
];
1266 strncpy(output
, segover
, 2);
1272 int32_t eatbyte(uint8_t *data
, char *output
, int outbufsize
)
1274 snprintf(output
, outbufsize
, "db 0x%02X", *data
);