1 This is a short overview for the reference clocks currently supported
2 by xntp V3. (Ultimate wisdom can be obtained from xntpd/refclock_*.c
3 this file was derived from that information - unfortunately some comments
4 in the files tend to get stale - so use with caution)
7 127.127.0.x no clock (fails to configure)
8 127.127.1.x local clock - use local clock as reference
9 127.127.2.x no clock (fails to configure)
10 127.127.3.x PSTI 1010/1020 WWV Clock
11 127.127.4.x SPECTRACOM WWVB receiver 8170 and Netclock/2
12 127.127.5.x Kinimetric Truetime 468-DC GOES receiver
13 127.127.6.x IRIG audio decode (Sun & modified BSD audio driver)
14 127.127.7.x CHU Timecode (via normal receiver & Bell 103 modem)
15 127.127.8.x PARSE (generic driver for a bunch of DCF/GPS clocks
16 can be extended for other clocks too)
17 8.0-3 Meinberg PZF535/TCXO
18 8.4-7 Meinberg PZF535/OCXO
19 8.8-11 Meinberg DCF U/A 31
21 8.16-19 Walter Schmid DCF receiver (Kit)
22 8.20-23 Conrad DCF77 receiver module + level converter (Kit)
23 8.24-27 TimeBrick (limited availability ask
24 time@informatik.uni-erlangen.de)
25 8.28-31 Meinberg GPS166
26 8.32-35 Trimble SV6 GPS receiver
27 127.127.9.x MX4200 GPS receiver
28 127.127.10.x Austron 2201A GPS Timing Receiver
29 127.127.11.x Kinemetrics Truetime OM-DC OMEGA Receiver
30 127.127.12.x KSI/Odetecs TPRO-S IRIG-B / TPRO-SAT GPS
31 127.127.13.x Leitch: CSD 5300 Master Clock System Driver
33 127/127.15.x TrueTime GPS/TM-TMD
34 127.127.16.x Bancomm GPS/IRIG Ticktock
35 127.127.17.x Datum Programmable Time System