1 # $NetBSD: MPCSA_GENERIC,v 1.11 2009/12/05 20:11:11 pooka Exp $
3 # GENERIC machine description file
5 # This machine description file is used to generate the default NetBSD
6 # kernel. The generic kernel does not include all options, subsystems
7 # and device drivers, but should be useful for most applications.
9 # The machine description file can be customised for your specific
10 # machine to reduce the kernel size and improve its performance.
12 # For further information on compiling NetBSD kernels, see the config(8)
15 # For further information on hardware support for this architecture, see
16 # the intro(4) man page. For further information about kernel options
17 # for this architecture, see the options(4) man page. For an explanation
18 # of each device driver in this file see the section 4 man page for the
21 include "arch/evbarm/conf/std.mpcsa"
23 options INCLUDE_CONFIG_FILE # embed config file in kernel binary
25 #ident "GENERIC-$Revision: 1.12 $"
27 maxusers 32 # estimated number of users
30 options CPU_ARM9 # Support the ARM9TDMI core
31 makeoptions CPUFLAGS="-mtune=arm920t -mcpu=arm920t"
33 # CPU-related options.
34 #options MATH_EMULATE # floating point emulation
36 # doesn't work with MP just yet..
37 #options PERFCTRS # performance-monitoring counters support
39 #options MULTIBOOT # Multiboot support (see multiboot(8))
41 # delay between "rebooting ..." message and hardware reset, in milliseconds
42 #options CPURESET_DELAY=2000
44 # This option allows you to force a serial console at the specified
45 # I/O address. see console(4) for details.
46 #options CONSDEVNAME="\"com\"",CONADDR=0x2f8,CONSPEED=57600
47 # you don't want the option below ON iff you are using the
48 # serial console option of the new boot strap code.
49 #options CONS_OVERRIDE # Always use above! independent of boot info
51 # Standard system options
53 #options INSECURE # disable kernel security levels - X needs this
55 options RTC_OFFSET=0 # hardware clock is this many mins. west of GMT
56 options NTP # NTP phase/frequency locked loop
58 options KTRACE # system call tracing via ktrace(1)
60 options SYSVMSG # System V-like message queues
61 options SYSVSEM # System V-like semaphores
62 #options SEMMNI=10 # number of semaphore identifiers
63 #options SEMMNS=60 # number of semaphores in system
64 #options SEMUME=10 # max number of undo entries per process
65 #options SEMMNU=30 # number of undo structures in system
66 options SYSVSHM # System V-like memory sharing
67 options P1003_1B_SEMAPHORE # p1003.1b semaphore support
70 #options USERCONF # userconf(4) support
71 #options PIPE_SOCKETPAIR # smaller, but slower pipe(2)
72 options SYSCTL_INCLUDE_DESCR # Include sysctl descriptions in kernel
74 # Beep when it is safe to power down the system (requires sysbeep)
76 # Some tunable details of the above feature (default values used below)
77 #options BEEP_ONHALT_COUNT=3 # Times to beep
78 #options BEEP_ONHALT_PITCH=1500 # Default frequency (in Hz)
79 #options BEEP_ONHALT_PERIOD=250 # Default duration (in msecs)
81 # Enable experimental buffer queue strategy for better responsiveness under
82 # high disk I/O load. Likely stable but not yet the default.
83 #options BUFQ_READPRIO
84 #options BUFQ_PRIOCSCAN
86 # Diagnostic/debugging support options
87 options DIAGNOSTIC # expensive kernel consistency checks
88 options DEBUG # expensive debugging checks/support
89 options KMEMSTATS # kernel memory statistics (vmstat -m)
90 options DDB # in-kernel debugger
91 options DDB_ONPANIC=1 # see also sysctl(8): `ddb.onpanic'
92 options DDB_HISTORY_SIZE=512 # enable history editing in DDB
93 #options KGDB # remote debugger
94 #options KGDB_DEVNAME="\"com\"",KGDB_DEVADDR=0x3f8,KGDB_DEVRATE=9600
95 makeoptions DEBUG="-Os -g" # compile full symbol table
96 options SYMTAB_SPACE=450000
97 #options SYSCALL_STATS # per syscall counts
98 #options SYSCALL_TIMES # per syscall times
99 #options SYSCALL_TIMES_HASCOUNTER # use 'broken' rdtsc (soekris)
101 # Compatibility options
102 #options COMPAT_NOMID # NetBSD 0.8, 386BSD, and BSDI
103 #options COMPAT_09 # NetBSD 0.9
104 #options COMPAT_10 # NetBSD 1.0
105 #options COMPAT_11 # NetBSD 1.1
106 #options COMPAT_12 # NetBSD 1.2, 386BSD, and BSDI
107 #options COMPAT_13 # NetBSD 1.3, 386BSD, and BSDI
108 #options COMPAT_14 # NetBSD 1.4
109 #options COMPAT_15 # NetBSD 1.5
110 options COMPAT_16 # NetBSD 1.6
111 options COMPAT_20 # NetBSD 2.0
112 options COMPAT_30 # NetBSD 3.0
113 options COMPAT_43 # 4.3BSD, 386BSD, and BSDI
114 #options COMPAT_386BSD_MBRPART # recognize old partition ID
115 #options TCP_COMPAT_42 # 4.2BSD TCP/IP bug compat. Not recommended.
117 #options COMPAT_OSSAUDIO # OSS (Voxware) audio driver compatibility
118 #options COMPAT_SVR4 # binary compatibility with SVR4
119 #options COMPAT_IBCS2 # binary compatibility with SCO and ISC
120 #options COMPAT_LINUX # binary compatibility with Linux
121 #options COMPAT_FREEBSD # binary compatibility with FreeBSD
122 #options COMPAT_MACH # binary compatibility with Mach binaries
123 #options COMPAT_DARWIN # binary compatibility with Darwin binaries
124 #options EXEC_MACHO # exec MACH-O binaries
125 #options COMPAT_NDIS # NDIS network driver
126 #options COMPAT_PECOFF # kernel support to run Win32 apps
127 options COMPAT_BSDPTY # /dev/[pt]ty?? ptys.
130 file-system FFS # UFS
131 #file-system EXT2FS # second extended file system (linux)
132 #file-system LFS # log-structured file system
133 file-system MFS # memory file system
134 file-system NFS # Network File System client
135 #file-system NTFS # Windows/NT file system (experimental)
136 #file-system CD9660 # ISO 9660 + Rock Ridge file system
137 file-system MSDOSFS # MS-DOS file system
138 #file-system FDESC # /dev/fd
139 file-system KERNFS # /kern
140 file-system NULLFS # loopback file system
141 #file-system OVERLAY # overlay file system
142 #file-system PROCFS # /proc
143 #file-system UMAPFS # NULLFS + uid and gid remapping
144 file-system UNION # union file system
145 #file-system CODA # Coda File System; also needs vcoda (below)
146 #file-system SMBFS # experimental - CIFS; also needs nsmb (below)
147 file-system PTYFS # /dev/ptm support
148 file-system TMPFS # Efficient memory file-system
149 #file-system UDF # experimental - OSTA UDF CD/DVD file-system
151 # File system options
152 #options QUOTA # UFS quotas
153 #options FFS_EI # FFS Endian Independent support
154 options WAPBL # File system journaling support - Experimental
155 # Note that UFS_DIRHASH is suspected of causing kernel memory corruption.
156 # It is not recommended for general use.
157 #options UFS_DIRHASH # UFS Large Directory Hashing - Experimental
158 #options NFSSERVER # Network File System server
159 options FFS_NO_SNAPSHOT # No FFS snapshot support
160 #options EXT2FS_SYSTEM_FLAGS # makes ext2fs file flags (append and
161 # immutable) behave as system flags.
164 options GATEWAY # packet forwarding
165 options INET # IP + ICMP + TCP + UDP
166 #options INET6 # IPV6
167 #options IPSEC # IP security
168 #options IPSEC_ESP # IP security (encryption part; define w/IPSEC)
169 #options IPSEC_NAT_T # IPsec NAT traversal (NAT-T)
170 #options IPSEC_DEBUG # debug for IP security
171 #options MROUTING # IP multicast routing
172 #options PIM # Protocol Independent Multicast
173 #options ISO,TPIP # OSI
174 #options EON # OSI tunneling over IP
175 #options NETATALK # AppleTalk networking protocols
176 options PPP_BSDCOMP # BSD-Compress compression support for PPP
177 options PPP_DEFLATE # Deflate compression support for PPP
178 options PPP_FILTER # Active filter support for PPP (requires bpf)
179 options PFIL_HOOKS # pfil(9) packet filter hooks
180 options IPFILTER_LOG # ipmon(8) log support
181 options IPFILTER_LOOKUP # ippool(8) support
182 #options IPFILTER_DEFAULT_BLOCK # block all packets by default
183 #options TCP_DEBUG # Record last TCP_NDEBUG packets with SO_DEBUG
185 #options ALTQ # Manipulate network interfaces' output queues
186 #options ALTQ_BLUE # Stochastic Fair Blue
187 #options ALTQ_CBQ # Class-Based Queueing
188 #options ALTQ_CDNR # Diffserv Traffic Conditioner
189 #options ALTQ_FIFOQ # First-In First-Out Queue
190 #options ALTQ_FLOWVALVE # RED/flow-valve (red-penalty-box)
191 #options ALTQ_HFSC # Hierarchical Fair Service Curve
192 #options ALTQ_LOCALQ # Local queueing discipline
193 #options ALTQ_PRIQ # Priority Queueing
194 #options ALTQ_RED # Random Early Detection
195 #options ALTQ_RIO # RED with IN/OUT
196 #options ALTQ_WFQ # Weighted Fair Queueing
198 # These options enable verbose messages for several subsystems.
199 # Warning, these may compile large string tables into the kernel!
200 options MIIVERBOSE # verbose PHY autoconfig messages
201 options PCMCIAVERBOSE # verbose PCMCIA configuration messages
202 options SCSIVERBOSE # human readable SCSI error messages
203 options USBVERBOSE # verbose USB device autoconfig messages
205 options NFS_BOOT_DHCP,NFS_BOOT_BOOTPARAM
210 # builtin terminal emulations
211 #options WSEMUL_SUN # sun terminal emulation
212 #options WSEMUL_VT100 # VT100 / VT220 emulation
213 # customization of console and kernel output - see dev/wscons/wsdisplayvar.h
214 #options WSDISPLAY_CUSTOM_OUTPUT # color customization from wsconsctl(8)
215 #options WS_DEFAULT_FG=WSCOL_WHITE
216 #options WS_DEFAULT_BG=WSCOL_BLACK
217 #options WS_DEFAULT_COLATTR="(0)"
218 #options WS_DEFAULT_MONOATTR="(0)"
219 #options WS_KERNEL_FG=WSCOL_GREEN
220 #options WS_KERNEL_BG=WSCOL_BLACK
221 #options WS_KERNEL_COLATTR=""
222 #options WS_KERNEL_MONOATTR=""
223 # customization of console border color
224 #options WSDISPLAY_CUSTOM_BORDER # custom border colors via wsconsctl(8)
225 #options WSDISPLAY_BORDER_COLOR=WSCOL_BLUE # default color
226 # compatibility to other console drivers
227 #options WSDISPLAY_COMPAT_PCVT # emulate some ioctls
228 #options WSDISPLAY_COMPAT_SYSCONS # emulate some ioctls
229 #options WSDISPLAY_COMPAT_USL # VT handling
230 #options WSDISPLAY_COMPAT_RAWKBD # can get raw scancodes
231 #options WSKBD_EVENT_AUTOREPEAT # auto repeat in event mode
232 #options WSKBD_USONLY # strip off non-US keymaps
233 # don't attach pckbd as the console if no PS/2 keyboard is found
234 #options PCKBD_CNATTACH_MAY_FAIL
235 # see dev/pckbport/wskbdmap_mfii.c for implemented layouts
236 #options PCKBD_LAYOUT="(KB_DE | KB_NODEAD)" # for pckbd driver
237 #options UKBD_LAYOUT="(KB_DE | KB_NODEAD)" # for ukbd driver
238 # allocate a number of virtual screens at autoconfiguration time
239 #options WSDISPLAY_DEFAULTSCREENS=4
240 # use a large software cursor that doesn't blink
241 #options PCDISPLAY_SOFTCURSOR
242 # modify the screen type of the console; defaults to "80x25"
243 #options VGA_CONSOLE_SCREENTYPE="\"80x24\""
244 # work around a hardware bug that loaded fonts don't work; found on ATI cards
245 #options VGA_CONSOLE_ATI_BROKEN_FONTSEL
246 # console scrolling support.
247 #options WSDISPLAY_SCROLLSUPPORT
248 # enable VGA raster mode capable of displaying multilingual text on console
249 #options VGA_RASTERCONSOLE
250 # enable splash screen support; requires hw driver support
251 #options SPLASHSCREEN
252 #options SPLASHSCREEN_PROGRESS
254 # Kernel root file system and dump configuration.
255 #config netbsd root on sd0c type ffs
256 config netbsd root on wd0a type ffs
257 #config netbsd root on ? type ?
258 #config netbsd root on ? type nfs
261 # Device configuration
269 at91bus0 at mainbus? # AT91 bus
272 # Integrated peripherals:
273 # On-chip interrupt controller
274 at91aic0 at at91bus0 addr 0xfffff000 size 0x200
277 #at91st0 at at91bus0 addr 0xfffffd00 size 0x100 pid 1
278 at91tctmr0 at at91bus0 addr 0xfffa0000 size 0x40 pid 17
281 at91dbgu0 at at91bus0 addr 0xfffff200 size 0x200 pid 1
284 at91usart0 at at91bus0 addr 0xfffc0000 size 0x4000 pid 6
285 at91usart1 at at91bus0 addr 0xfffc4000 size 0x4000 pid 7
286 at91usart2 at at91bus0 addr 0xfffc8000 size 0x4000 pid 8
287 at91usart3 at at91bus0 addr 0xfffcc000 size 0x4000 pid 9
290 at91emac0 at at91bus0 addr 0xfffbc000 size 0x4000 pid 24
292 # General purpose I/O
293 at91pio0 at at91bus0 addr 0xfffff400 size 0x200 pid 2
294 at91pio1 at at91bus0 addr 0xfffff600 size 0x200 pid 3
295 at91pio2 at at91bus0 addr 0xfffff800 size 0x200 pid 4
296 at91pio3 at at91bus0 addr 0xfffffa00 size 0x200 pid 5
299 # On-chip CF interface
300 at91cf0 at at91bus0 addr 0x50000000 size 0x900000 pid 4
304 ohci0 at at91bus0 addr 0x00300000 size 0x100000 pid 23
307 at91spi0 at at91bus0 addr 0xfffe0000 size 0x4000 pid 13
309 #spi_obuf0 at spi0 slave 1
311 mpcsa_leds0 at spi0 slave 1
315 at91twi0 at at91bus0 addr 0xfffb8000 size 0x4000 pid 12
317 ds1672rtc* at iic0 addr 0x68
318 seeprom* at iic0 addr 0x50 size 4096
322 # PCMCIA serial interfaces
323 com* at pcmcia? function ? # Modems and serial cards
325 pcmcom* at pcmcia? function ? # PCMCIA multi-port serial cards
326 com* at pcmcom? slave ? # ...and the slave devices
331 # AMD 768 and 8111 power/ACPI controllers
332 #dbcool* at iic? addr 0x2C # Unknown other motherboard(s)
333 #dbcool* at iic? addr 0x2D # Tyan S2881
334 #dbcool* at iic? addr 0x2E # Tyan S2882-D
337 #gpioow* at gpio? offset 6 mask 0x1 # 1-wire bitbanging via gpio
341 #owtemp* at onewire? # Temperature sensors
343 # SCSI Controllers and Devices
345 # PCMCIA SCSI controllers
346 #aic* at pcmcia? function ? # Adaptec APA-1460 SCSI
347 #esp* at pcmcia? function ? # Qlogic ESP406/FAS408 SCSI
348 #spc* at pcmcia? function ? # Fujitsu MB87030/MB89352 SCSI
354 sd* at scsibus? target ? lun ? # SCSI disk drives
355 #st* at scsibus? target ? lun ? # SCSI tape drives
356 #cd* at scsibus? target ? lun ? # SCSI CD-ROM drives
357 #ch* at scsibus? target ? lun ? # SCSI autochangers
358 #ses* at scsibus? target ? lun ? # SCSI Enclosure Services devices
359 #ss* at scsibus? target ? lun ? # SCSI scanners
360 #uk* at scsibus? target ? lun ? # SCSI unknown
363 # PCMCIA IDE controllers
364 wdc* at pcmcia? function ?
366 # ATA (IDE) bus support
367 atabus* at wdc? channel ?
371 # Flags are used only with controllers that support DMA operations
372 # and mode settings (e.g. some pciide controllers)
373 # The lowest order four bits (rightmost digit) of the flags define the PIO
374 # mode to use, the next set of four bits the DMA mode and the third set the
375 # UltraDMA mode. For each set of four bits, the 3 lower bits define the mode
376 # to use, and the last bit must be 1 for this setting to be used.
377 # For DMA and UDMA, 0xf (1111) means 'disable'.
378 # 0x0fac means 'use PIO mode 4, DMA mode 2, disable UltraDMA'.
379 # (0xc=1100, 0xa=1010, 0xf=1111)
380 # 0x0000 means "use whatever the drive claims to support".
381 wd* at atabus? drive ? flags 0x0000
387 # flags have the same meaning as for IDE drives.
388 #cd* at atapibus? drive ? flags 0x0000 # ATAPI CD-ROM drives
389 sd* at atapibus? drive ? flags 0x0000 # ATAPI disk drives
390 #st* at atapibus? drive ? flags 0x0000 # ATAPI tape drives
391 #uk* at atapibus? drive ? flags 0x0000 # ATAPI unknown
394 # Miscellaneous mass storage devices
400 # PCMCIA network interfaces
401 #an* at pcmcia? function ? # Aironet PC4500/PC4800 (802.11)
402 #awi* at pcmcia? function ? # BayStack 650/660 (802.11FH/DS)
403 #cnw* at pcmcia? function ? # Xircom/Netwave AirSurfer
404 #cs* at pcmcia? function ? # CS89xx Ethernet
405 #ep* at pcmcia? function ? # 3Com 3c589 and 3c562 Ethernet
406 #mbe* at pcmcia? function ? # MB8696x based Ethernet
407 #ne* at pcmcia? function ? # NE2000-compatible Ethernet
408 #ray* at pcmcia? function ? # Raytheon Raylink (802.11)
409 #sm* at pcmcia? function ? # Megahertz Ethernet
410 # tr at pcmcia has problems with Cardbus bridges
411 #tr* at pcmcia? function ? # TROPIC based Token-Ring
412 wi* at pcmcia? function ? # Lucent/Intersil WaveLan IEEE (802.11)
413 #xirc* at pcmcia? function ? # Xircom CreditCard Ethernet
416 #mhzc* at pcmcia? function ? # Megahertz Ethernet/Modem combo cards
422 #acphy* at mii? phy ? # Altima AC101 and AMD Am79c874 PHYs
423 #amhphy* at mii? phy ? # AMD 79c901 Ethernet PHYs
424 #bmtphy* at mii? phy ? # Broadcom BCM5201 and BCM5202 PHYs
425 #brgphy* at mii? phy ? # Broadcom BCM5400-family PHYs
426 #ciphy* at mii? phy ? # Cicada CS8201 Gig-E PHYs
427 #dmphy* at mii? phy ? # Davicom DM9101 PHYs
428 #exphy* at mii? phy ? # 3Com internal PHYs
429 #gentbi* at mii? phy ? # Generic Ten-Bit 1000BASE-[CLS]X PHYs
430 #glxtphy* at mii? phy ? # Level One LXT-1000 PHYs
431 #gphyter* at mii? phy ? # NS83861 Gig-E PHY
432 #icsphy* at mii? phy ? # Integrated Circuit Systems ICS189x
433 #igphy* at mii? phy ? # Intel IGP01E1000
434 #ikphy* at mii? phy ? # Intel 82563 PHYs
435 #inphy* at mii? phy ? # Intel 82555 PHYs
436 #iophy* at mii? phy ? # Intel 82553 PHYs
437 #lxtphy* at mii? phy ? # Level One LXT-970 PHYs
438 #makphy* at mii? phy ? # Marvell Semiconductor 88E1000 PHYs
439 #nsphy* at mii? phy ? # NS83840 PHYs
440 #nsphyter* at mii? phy ? # NS83843 PHYs
441 #pnaphy* at mii? phy ? # generic HomePNA PHYs
442 #qsphy* at mii? phy ? # Quality Semiconductor QS6612 PHYs
443 #rgephy* at mii? phy ? # Realtek 8169S/8110S internal PHYs
444 #rlphy* at mii? phy ? # Realtek 8139/8201L PHYs
445 #sqphy* at mii? phy ? # Seeq 80220/80221/80223 PHYs
446 #tlphy* at mii? phy ? # ThunderLAN PHYs
447 #tqphy* at mii? phy ? # TDK Semiconductor PHYs
448 ukphy0 at at91emac0 phy 3
449 ukphy* at aue? phy ? # generic unknown PHYs
450 ukphy* at axe? phy ? # generic unknown PHYs
451 ukphy* at udav? phy ? # generic unknown PHYs
452 ukphy* at url? phy ? # generic unknown PHYs
453 #urlphy* at mii? phy ? # Realtek RTL8150L internal PHYs
456 # USB Controller and Devices
463 uhub* at uhub? port ? configuration ? interface ?
466 #uhidev* at uhub? port ? configuration ? interface ?
469 #ums* at uhidev? reportid ?
470 #wsmouse* at ums? mux 0
472 # USB eGalax touch-panel
473 #uep* at uhub? port ?
474 #wsmouse* at uep? mux 0
477 #ukbd* at uhidev? reportid ?
478 #wskbd* at ukbd? console ? mux 1
481 #ucycom* at uhidev? reportid ?
483 # USB Generic HID devices
484 #uhid* at uhidev? reportid ?
487 #ulpt* at uhub? port ? configuration ? interface ?
490 #umodem* at uhub? port ? configuration ?
494 umass* at uhub? port ? configuration ? interface ?
498 #uaudio* at uhub? port ? configuration ?
501 #umidi* at uhub? port ? configuration ?
504 # USB-IrDA bridge spec
505 #uirda* at uhub? port ? configuration ? interface ?
508 # SigmaTel STIr4200 USB/IrDA Bridge
509 #ustir* at uhub? port ?
512 # USB Ethernet adapters
513 aue* at uhub? port ? # ADMtek AN986 Pegasus based adapters
514 axe* at uhub? port ? # ASIX AX88172 based adapters
515 cdce* at uhub? port ? # CDC, Ethernet Networking Control Model
516 cue* at uhub? port ? # CATC USB-EL1201A based adapters
517 kue* at uhub? port ? # Kawasaki LSI KL5KUSB101B based adapters
518 udav* at uhub? port ? # Davicom DM9601 based adapters
519 url* at uhub? port ? # Realtek RTL8150L based adapters
521 # USB 802.11 adapters
522 atu* at uhub? port ? # Atmel AT76C50XX based adapters
523 ral* at uhub? port ? # Ralink Technology RT25x0 802.11a/b/g
524 rum* at uhub? port ? # Ralink Technology RT2501/RT2601 802.11a/b/g
526 # Prolific PL2301/PL2302 host-to-host adapter
530 ubsa* at uhub? port ? # Belkin serial adapter
531 ucom* at ubsa? portno ?
533 uftdi* at uhub? port ? # FTDI FT8U100AX serial adapter
534 ucom* at uftdi? portno ?
536 #uipaq* at uhub? port ? # iPAQ PDAs
537 #ucom* at uipaq? portno ?
539 umct* at uhub? port ? # MCT USB-RS232 serial adapter
540 ucom* at umct? portno ?
542 uplcom* at uhub? port ? # I/O DATA USB-RSAQ2 serial adapter
543 ucom* at uplcom? portno ?
545 uvscom* at uhub? port ? # SUNTAC Slipper U VS-10U serial adapter
546 ucom* at uvscom? portno ?
548 # Diamond Multimedia Rio 500
549 #urio* at uhub? port ?
551 # USB Handspring Visor
552 #uvisor* at uhub? port ?
555 # Kyocera AIR-EDGE PHONE
556 #ukyopon* at uhub? port ?
557 #ucom* at ukyopon? portno ?
560 #uscanner* at uhub? port ?
562 # USB scanners that use SCSI emulation, e.g., HP5300
563 #usscanner* at uhub? port ?
565 # Topfield TF5000PVR range of DVB recorders
566 #utoppy* at uhub? port ?
568 # Y@P firmware loader
569 #uyap* at uhub? port ?
571 # D-Link DSB-R100 USB radio
572 #udsbr* at uhub? port ?
576 #ugen* at uhub? port ?
579 # IrDA and Consumer Ir devices
590 #midi* at pcppi? # MIDI interface to the PC speaker
594 # Bluetooth Controller and Device support
596 # Bluetooth PCMCIA Controllers
597 #bt3c* at pcmcia? function ? # 3Com 3CRWB6096-A
599 # Bluetooth USB Controllers
600 #ubt* at uhub? port ? configuration ? interface ?
602 # Bluetooth Device Hub
606 # Bluetooth HID support
610 #btms* at bthidev? reportid ?
611 #wsmouse* at btms? mux 0
614 #btkbd* at bthidev? reportid ?
615 #wskbd* at btkbd? console ? mux 1
617 # Bluetooth Audio support
625 #pseudo-device crypto # /dev/crypto device
626 #pseudo-device swcrypto # software crypto implementation
628 # disk/mass storage pseudo-devices
629 #pseudo-device ccd 4 # concatenated/striped disk devices
630 #pseudo-device cgd 4 # cryptographic disk devices
631 #pseudo-device raid 8 # RAIDframe disk driver
632 #options RAID_AUTOCONFIG # auto-configuration of RAID components
633 # Options to enable various other RAIDframe RAID types.
634 #options RF_INCLUDE_EVENODD=1
635 #options RF_INCLUDE_RAID5_RS=1
636 #options RF_INCLUDE_PARITYLOGGING=1
637 #options RF_INCLUDE_CHAINDECLUSTER=1
638 #options RF_INCLUDE_INTERDECLUSTER=1
639 #options RF_INCLUDE_PARITY_DECLUSTERING=1
640 #options RF_INCLUDE_PARITY_DECLUSTERING_DS=1
641 #pseudo-device fss 4 # file system snapshot device
643 pseudo-device md 1 # memory disk device (ramdisk)
644 #pseudo-device vnd # disk-like interface to files
645 #options VND_COMPRESSION # compressed vnd(4)
647 # network pseudo-devices
648 pseudo-device bpfilter # Berkeley packet filter
649 #pseudo-device carp # Common Address Redundancy Protocol
650 pseudo-device ipfilter # IP filter (firewall) and NAT
651 pseudo-device loop # network loopback
652 pseudo-device ppp # Point-to-Point Protocol
653 #pseudo-device pppoe # PPP over Ethernet (RFC 2516)
654 #pseudo-device sl # Serial Line IP
655 #pseudo-device strip # Starmode Radio IP (Metricom)
656 #pseudo-device irframetty # IrDA frame line discipline
657 #pseudo-device tap # virtual Ethernet
658 pseudo-device tun # network tunneling over tty
659 #pseudo-device gre # generic L3 over IP tunnel
660 #pseudo-device gif # IPv[46] over IPv[46] tunnel (RFC1933)
661 #pseudo-device faith # IPv[46] tcp relay translation i/f
662 #pseudo-device stf # 6to4 IPv6 over IPv4 encapsulation
663 pseudo-device vlan # IEEE 802.1q encapsulation
664 #pseudo-device bridge # simple inter-network bridging
665 #options BRIDGE_IPF # bridge uses IP/IPv6 pfil hooks too
666 pseudo-device pf # PF packet filter
667 pseudo-device pflog # PF log if
668 # srt is EXPERIMENTAL
669 #pseudo-device srt # source-address-based routing
671 # miscellaneous pseudo-devices
672 pseudo-device pty # pseudo-terminals
673 #pseudo-device sequencer 1 # MIDI sequencer
674 pseudo-device rnd # /dev/random and in-kernel generator
675 #options RND_COM # use "com" randomness as well (BROKEN)
676 pseudo-device clockctl # user control of clock subsystem
677 pseudo-device ksyms # /dev/ksyms
679 # a pseudo device needed for Coda # also needs CODA (above)
680 #pseudo-device vcoda 4 # coda minicache <-> venus comm.
682 # a pseudo device needed for SMBFS
683 #pseudo-device nsmb # experimental - SMB requester
685 # wscons pseudo-devices
686 #pseudo-device wsmux # mouse & keyboard multiplexor
687 #pseudo-device wsfont
689 #options FILEASSOC # fileassoc(9) - required for Veriexec
692 #pseudo-device veriexec
694 # Uncomment the fingerprint methods below that are desired. Note that
695 # removing fingerprint methods will have almost no impact on the kernel
698 #options VERIFIED_EXEC_FP_RMD160
699 #options VERIFIED_EXEC_FP_SHA256
700 #options VERIFIED_EXEC_FP_SHA384
701 #options VERIFIED_EXEC_FP_SHA512
702 #options VERIFIED_EXEC_FP_SHA1
703 #options VERIFIED_EXEC_FP_MD5
705 options PAX_MPROTECT=0 # PaX mprotect(2) restrictions