1 .\" $NetBSD: hardware,v 1.1 2001/10/14 14:08:03 bjh21 Exp $
4 \*V runs on Acorn systems with
7 with or without a FPU coprocessor.
8 The minimal configuration is said to require 8 MB of RAM and 100 MB of
9 disk space, though we do not know of anyone running with a system quite
11 8 MB of RAM might allow you to run X and/or compile, but it
13 Note that until you have around 16 MB of RAM, getting more RAM is more
14 important than getting a faster CPU.
16 .Ss2 Supported devices
17 .(bullet -offset indent
18 RiscPC/A7000(+) floppy controller
26 RapIDE Issue 2 IDE controller
28 ICS V5 & V6 IDE controller
43 Morley SCSI I (uncached only)
48 RiscPC Motherboard serial port
50 RiscPC Motherboard parallel port
79 Most SCSI CD-ROM drives
81 Most ATAPI CD-ROM drives
83 Some low-priced IDE CD-ROM drives are known for being not or not fully
84 ATAPI compliant, and thus require some hack (generally an entry to a
85 quirk table) to work with
92 RiscPC quadrature mouse
131 RiscPC realtime clock
135 Drivers for hardware marked with
139 present in installation kernels.
141 Support for some devices is limited to particular kernels. For example,
142 there is no SA110 support in A7000 kernels.
144 .Ss2 Unsupported devices
145 .(bullet -offset indent -compact
146 Acorn/Aleph1 PC cards
148 Any SCSI card using a PowerROM
150 Podule based serial ports
152 Castle SCSI/Ethernet cards
155 Drivers are planned for some of the above devices.