1 /* $NetBSD: wd33c93var.h,v 1.9 2009/02/12 06:24:45 rumble Exp $ */
4 * Copyright (c) 1990 The Regents of the University of California.
7 * This code is derived from software contributed to Berkeley by
8 * Van Jacobson of Lawrence Berkeley Laboratory.
10 * Redistribution and use in source and binary forms, with or without
11 * modification, are permitted provided that the following conditions
13 * 1. Redistributions of source code must retain the above copyright
14 * notice, this list of conditions and the following disclaimer.
15 * 2. Redistributions in binary form must reproduce the above copyright
16 * notice, this list of conditions and the following disclaimer in the
17 * documentation and/or other materials provided with the distribution.
18 * 3. Neither the name of the University nor the names of its contributors
19 * may be used to endorse or promote products derived from this software
20 * without specific prior written permission.
22 * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
23 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
24 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
25 * ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
26 * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
27 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
28 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
29 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
30 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
31 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
34 * @(#)scsivar.h 7.1 (Berkeley) 5/8/90
38 #include <sys/callout.h>
39 #include <sys/malloc.h>
43 #define SBIC_NTAGS 256
45 #define SBIC_MAX_MSGLEN 8
47 #define SBIC_ABORT_TIMEOUT 2000 /* time to wait for abort */
48 #define SBIC_SENSE_TIMEOUT 1000 /* time to wait for sense */
51 * ACB. Holds additional information for each SCSI command Comments: We
52 * need a separate scsi command block because we may need to overwrite it
53 * with a request sense command. Basically, we refrain from fiddling with
54 * the scsi_xfer struct (except do the expected updating of return values).
55 * We'll generally update: xs->{flags,resid,error,sense,status} and
56 * occasionally xs->retries.
59 TAILQ_ENTRY(wd33c93_acb
) chain
;
60 struct scsipi_xfer
*xs
; /* SCSI xfer ctrl block from above */
61 int flags
; /* Status */
63 #define ACB_ACTIVE 0x01
64 #define ACB_READY 0x02 /* ACB is on ready list */
66 #define ACB_SENSE 0x08 /* ACB Requesting sense */
67 #define ACB_COMPLETE 0x10 /* Disconnected at end of xfer */
68 #define ACB_RESET 0x20 /* Require Reset */
69 #define ACB_ABORT 0x40 /* Require Abort */
72 struct scsipi_generic cmd
; /* SCSI command block */
74 char *daddr
; /* kva for data */
75 size_t dleft
; /* bytes remaining */
76 u_char tag_type
; /* TAG Type (0x20-0x22, 0=No Tags) */
77 u_char tag_id
; /* TAG id number */
81 * Some info about each (possible) target on the SCSI bus. This should
82 * probably have been a "per target+lunit" structure, but we'll leave it at
83 * this for now. Is there a way to reliably hook it up to sc->fordriver??
86 struct wd33c93_linfo
{
87 LIST_ENTRY(wd33c93_linfo
) link
;
90 int used
; /* # slots in use */
92 #define L_STATE_IDLE 0
93 #define L_STATE_BUSY 1
94 #define L_STATE_ESTAT 2
95 struct wd33c93_acb
*untagged
;
96 struct wd33c93_acb
*queued
[SBIC_NTAGS
];
99 struct wd33c93_tinfo
{
100 int cmds
; /* # of commands processed */
101 int dconns
; /* # of disconnects */
104 #define T_NEED_RESET 0x01 /* Should send a BUS_DEV_RESET */
105 #define T_NEGOTIATE 0x02 /* (Re)Negotiate synchronous options */
106 #define T_BUSY 0x04 /* Target is busy */
107 #define T_SYNCMODE 0x08 /* SYNC mode has been negotiated */
108 #define T_NOSYNC 0x10 /* Force ASYNC mode */
109 #define T_NODISC 0x20 /* Don't allow disconnect */
110 #define T_TAG 0x40 /* Turn on TAG QUEUEs */
111 #define T_WANTSYNC 0x80 /* Negotiatious should aim for sync */
112 u_char period
; /* Period suggestion */
113 u_char offset
; /* Offset suggestion */
114 struct wd33c93_linfo
*lun
[SBIC_NLUN
]; /* LUN list for this target */
117 /* Look up a lun in a tinfo */
118 #define TINFO_LUN(t, l) ((t)->lun[(l)])
120 struct wd33c93_softc
{
123 struct scsipi_channel sc_channel
; /* proto for sub devices */
124 struct scsipi_adapter sc_adapter
;
125 device_t sc_child
; /* attached scsibus, if any */
126 struct callout sc_watchdog
;
127 void *sc_driver
; /* driver specific field */
129 int target
; /* Currently active target */
130 int lun
; /* Currently active LUN */
132 /* WD33c93 registers */
133 bus_space_tag_t sc_regt
;
134 bus_space_handle_t sc_asr_regh
;
135 bus_space_handle_t sc_data_regh
;
138 /* Data about the current nexus (updated for every cmd switch) */
139 void * sc_daddr
; /* Current data pointer */
140 size_t sc_dleft
; /* Data left to transfer */
141 ssize_t sc_tcnt
; /* number of bytes transfered */
143 /* Lists of command blocks */
144 TAILQ_HEAD(acb_list
, wd33c93_acb
) ready_list
;
146 struct wd33c93_acb
*sc_nexus
; /* current command */
147 struct wd33c93_tinfo sc_tinfo
[8];
151 int sc_disc
; /* current # of active nexus's */
155 u_short sc_msgify
; /* Last IDENTIFY message */
156 u_short sc_msgout
; /* Current message out */
157 u_short sc_msgpriq
; /* mesg_out queue (bitmap) */
158 u_short sc_msgoutq
; /* mesg_out queue */
160 u_char sc_imsg
[SBIC_MAX_MSGLEN
];
161 u_char sc_omsg
[SBIC_MAX_MSGLEN
];
165 /* Static hardware attributes supplied by attachment */
166 int sc_id
; /* SCSI ID for controller */
167 int sc_clkfreq
; /* wd33c93 clk freq * 10 MHz */
168 uint8_t sc_dmamode
; /* One of SBIC_CTL_*DMA */
170 /* Static hardware attributes derived by wd33c93_attach() */
171 int sc_chip
; /* Chip variation */
172 int sc_rev
; /* Chip revision */
173 int sc_cfflags
; /* Copy of config flags */
174 int sc_maxxfer
; /* Maximum transfer size */
175 uint8_t sc_maxoffset
; /* Maximum sync offset (bytes) */
176 uint8_t sc_minsyncperiod
; /* Minimum supported sync xfer period */
177 uint8_t sc_syncperiods
[7]; /* Sync transfer periods (4ns units) */
178 uint8_t sc_fsyncperiods
[3]; /* Sync transfer periods for Fast SCSI*/
180 int (*sc_dmasetup
) (struct wd33c93_softc
*, void **,
181 size_t *, int, size_t *);
182 int (*sc_dmago
) (struct wd33c93_softc
*);
183 void (*sc_dmastop
) (struct wd33c93_softc
*);
184 void (*sc_reset
) (struct wd33c93_softc
*);
187 /* values for sc_flags */
188 #define SBICF_SELECTED 0x01 /* bus is in selected state. */
189 #define SBICF_NODMA 0x02 /* Polled transfer */
190 #define SBICF_INDMA 0x04 /* DMA I/O in progress */
191 #define SBICF_SYNCNEGO 0x08 /* Sync negotiation in progress */
192 #define SBICF_ABORTING 0x10 /* Aborting */
194 /* values for sc_state */
195 #define SBIC_UNINITIALIZED 0 /* Driver not initialized */
196 #define SBIC_IDLE 1 /* waiting for something to do */
197 #define SBIC_SELECTING 2 /* SCSI command is arbiting */
198 #define SBIC_RESELECTED 3 /* Has been reselected */
199 #define SBIC_IDENTIFIED 4 /* Has gotten IFY but not TAG */
200 #define SBIC_CONNECTED 5 /* Actively using the SCSI bus */
201 #define SBIC_DISCONNECT 6 /* MSG_DISCONNECT received */
202 #define SBIC_CMDCOMPLETE 7 /* MSG_CMDCOMPLETE received */
203 #define SBIC_ERROR 8 /* Error has occurred */
204 #define SBIC_SELTIMEOUT 9 /* Select Timeout */
205 #define SBIC_CLEANING 10 /* Scrubbing ACB's */
206 #define SBIC_BUSRESET 11 /* SCSI RST has been issued */
208 /* values for sc_msgout */
209 #define SEND_DEV_RESET 0x0001
210 #define SEND_PARITY_ERROR 0x0002
211 #define SEND_INIT_DET_ERR 0x0004
212 #define SEND_REJECT 0x0008
213 #define SEND_IDENTIFY 0x0010
214 #define SEND_ABORT 0x0020
215 #define SEND_WDTR 0x0040
216 #define SEND_SDTR 0x0080
217 #define SEND_TAG 0x0100
219 /* WD33c93 chipset revisions - values for sc_rev */
220 #define SBIC_CHIP_UNKNOWN 0
221 #define SBIC_CHIP_WD33C93 1
222 #define SBIC_CHIP_WD33C93A 2
223 #define SBIC_CHIP_WD33C93B 3
225 #define SBIC_CHIP_LIST {"UNKNOWN", "WD33C93", "WD33C93A", "WD33C93B"}
227 /* macros for sc_cfflags */
228 #define CFFLAGS_NODISC(_cf, _t) ((_cf) & (1 << ( 0 + (_t))))
229 #define CFFLAGS_NOSYNC(_cf, _t) ((_cf) & (1 << ( 8 + (_t))))
230 #define CFFLAGS_NOTAGS(_cf, _t) ((_cf) & (1 << (16 + (_t))))
233 * States returned by our state machine
235 #define SBIC_STATE_ERROR -1
236 #define SBIC_STATE_DONE 0
237 #define SBIC_STATE_RUNNING 1
238 #define SBIC_STATE_DISCONNECT 2
240 #define DEBUG_ACBS 0x01
241 #define DEBUG_INTS 0x02
242 #define DEBUG_CMDS 0x04
243 #define DEBUG_MISC 0x08
244 #define DEBUG_TRAC 0x10
245 #define DEBUG_RSEL 0x20
246 #define DEBUG_PHASE 0x40
247 #define DEBUG_DMA 0x80
248 #define DEBUG_CCMDS 0x100
249 #define DEBUG_MSGS 0x200
250 #define DEBUG_TAGS 0x400
251 #define DEBUG_SYNC 0x800
254 extern int wd33c93_debug_flags
;
255 #define SBIC_DEBUG(level, str) \
257 if (wd33c93_debug & __CONCAT(DEBUG_,level)) \
261 #define SBIC_DEBUG(level, str)
267 void wd33c93_scsi_request (struct scsipi_channel
*,
268 scsipi_adapter_req_t
, void *);
269 void wd33c93_attach (struct wd33c93_softc
*);
270 int wd33c93_intr (struct wd33c93_softc
*);
272 #endif /* _SBICVAR_H_ */