1 /* $NetBSD: wtreg.h,v 1.6.2.1 2005/03/04 16:43:17 skrll Exp $ */
4 * Streamer tape driver.
5 * Supports Archive and Wangtek compatible QIC-02/QIC-36 boards.
7 * Copyright (C) 1993 by:
8 * Sergey Ryzhkov <sir@kiae.su>
9 * Serge Vakulenko <vak@zebub.msk.su>
11 * This software is distributed with NO WARRANTIES, not even the implied
12 * warranties for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
14 * Authors grant any other persons or organisations permission to use
15 * or modify this software as long as this message is kept with the software,
16 * all derivative works or modified versions.
18 * This driver is derived from the old 386bsd Wangtek streamer tape driver,
19 * made by Robert Baron at CMU, based on Intel sources.
23 * Copyright (c) 1989 Carnegie-Mellon University.
24 * All rights reserved.
26 * Authors: Robert Baron
28 * Permission to use, copy, modify and distribute this software and
29 * its documentation is hereby granted, provided that both the copyright
30 * notice and this permission notice appear in all copies of the
31 * software, derivative works or modified versions, and any portions
32 * thereof, and that both notices appear in supporting documentation.
34 * CARNEGIE MELLON ALLOWS FREE USE OF THIS SOFTWARE IN ITS "AS IS"
35 * CONDITION. CARNEGIE MELLON DISCLAIMS ANY LIABILITY OF ANY KIND
36 * FOR ANY DAMAGES WHATSOEVER RESULTING FROM THE USE OF THIS SOFTWARE.
38 * Carnegie Mellon requests users of this software to return to
40 * Software Distribution Coordinator or Software.Distribution@CS.CMU.EDU
41 * School of Computer Science
42 * Carnegie Mellon University
43 * Pittsburgh PA 15213-3890
45 * any improvements or extensions that they make and grant Carnegie the
46 * rights to redistribute these changes.
50 * Copyright 1988, 1989 by Intel Corporation
53 /* ioctl for direct QIC commands */
54 #define WTQICMD _IO('W', 0)
56 /* QIC-02 commands allowed for WTQICMD */
57 #define QIC_ERASE 0x22 /* erase the tape */
58 #define QIC_RETENS 0x24 /* retension the tape */
60 /* internal QIC-02 commands */
61 #define QIC_RDDATA 0x80 /* read data */
62 #define QIC_READFM 0xa0 /* read file mark */
63 #define QIC_WRTDATA 0x40 /* write data */
64 #define QIC_WRITEFM 0x60 /* write file mark */
65 #define QIC_RDSTAT 0xc0 /* read status command */
66 #define QIC_REWIND 0x21 /* rewind command (position+bot) */
67 #define QIC_FMT11 0x26 /* set format QIC-11 */
68 #define QIC_FMT24 0x27 /* set format QIC-24 */
69 #define QIC_FMT120 0x28 /* set format QIC-120 */
70 #define QIC_FMT150 0x29 /* set format QIC-150 */
71 #define QIC_FMT300 0x2a /* set format QIC-300/QIC-2100 */
72 #define QIC_FMT600 0x2b /* set format QIC-600/QIC-2200 */
74 /* tape driver flags */
75 #define TPINUSE 0x0001 /* tape is already open */
76 #define TPREAD 0x0002 /* tape is only open for reading */
77 #define TPWRITE 0x0004 /* tape is only open for writing */
78 #define TPSTART 0x0008 /* tape must be rewound and reset */
79 #define TPRMARK 0x0010 /* read file mark command outstanding */
80 #define TPWMARK 0x0020 /* write file mark command outstanding */
81 #define TPREW 0x0040 /* rewind command outstanding */
82 #define TPEXCEP 0x0080 /* i/o exception flag */
83 #define TPVOL 0x0100 /* read file mark or hit end of tape */
84 #define TPWO 0x0200 /* write command outstanding */
85 #define TPRO 0x0400 /* read command outstanding */
86 #define TPWANY 0x0800 /* write command requested */
87 #define TPRANY 0x1000 /* read command requested */
88 #define TPWP 0x2000 /* write protect error seen */
89 #define TPTIMER 0x4000 /* timer() is active */
90 #define TPACTIVE 0x8000 /* DMA i/o active */
92 /* controller error register bits */
93 #define TP_FIL 0x0001 /* File mark detected */
94 #define TP_BNL 0x0002 /* Block not located */
95 #define TP_UDA 0x0004 /* Unrecoverable data error */
96 #define TP_EOM 0x0008 /* End of media */
97 #define TP_WRP 0x0010 /* Write protected cartridge */
98 #define TP_USL 0x0020 /* Unselected drive */
99 #define TP_CNI 0x0040 /* Cartridge not in place */
100 #define TP_ST0 0x0080 /* Status byte 0 bits */
101 #define TP_ST0MASK 0x00ff /* Status byte 0 mask */
102 #define TP_POR 0x0100 /* Power on/reset occurred */
103 #define TP_ERM 0x0200 /* Reserved for end of recorded media */
104 #define TP_BPE 0x0400 /* Reserved for bus parity error */
105 #define TP_BOM 0x0800 /* Beginning of media */
106 #define TP_MBD 0x1000 /* Marginal block detected */
107 #define TP_NDT 0x2000 /* No data detected */
108 #define TP_ILL 0x4000 /* Illegal command - should not happen! */
109 #define TP_ST1 0x8000 /* Status byte 1 bits */
110 #define TP_ST1MASK 0xff00 /* Status byte 1 mask */
112 /* formats for printing flags and error values */
113 #define WTDS_BITS "\20\1inuse\2read\3write\4start\5rmark\6wmark\7rew\10excep\11vol\12wo\13ro\14wany\15rany\16wp\17timer\20active"
114 #define WTER_BITS "\20\1eof\2bnl\3uda\4eom\5wrp\6usl\7cni\11por\12erm\13bpe\14bom\15mbd\16ndt\17ill"
116 /* device minor number */
117 #define WT_BSIZE 0100 /* long block flag */
118 #define WT_DENSEL 0070 /* density select mask */
119 #define WT_DENSDFLT 0000 /* default density */
120 #define WT_QIC11 0010 /* 11 megabytes? */
121 #define WT_QIC24 0020 /* 60 megabytes */
122 #define WT_QIC120 0030 /* 120 megabytes */
123 #define WT_QIC150 0040 /* 150 megabytes */
124 #define WT_QIC300 0050 /* 300 megabytes? */
125 #define WT_QIC600 0060 /* 600 megabytes? */