Expand PMF_FN_* macros.

[netbsd-mini2440.git] / sys / dev / pci / chipsfbreg.h

/*      $NetBSD: chipsfbreg.h,v 1.2 2006/09/27 05:19:23 macallan Exp $  */

/*
 * Copyright 2006 by Michael Lorenz.
 *
 * Redistribution and use in source and binary forms, with or without
 * modification, are permitted provided that the following conditions
 * are met:
 * 1. Redistributions of source code must retain the above copyright
 *    notice, this list of conditions and the following disclaimer.
 * 2. Redistributions in binary form must reproduce the above copyright
 *    notice, this list of conditions and the following disclaimer in the
 *    documentation and/or other materials provided with the distribution.
 *
 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
 * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
 * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
 * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
 * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
 * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
 * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
 * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
 * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
 * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
 *
*/

#ifndef CHIPSFB_H
#define CHIPSFB_H

/* VGA */
#define CRTC_INDEX      0x3d4
#define CRTC_DATA       0x3d5
#define SEQ_INDEX       0x3c4
#define SEQ_DATA        0x3c5
#define MISC_W          0x3c2
#define GRA_INDEX       0x3ce
#define GRA_DATA        0x3cf
#define ATT_IW          0x3c0

/* palette */
#define CT_DACMASK      0x3c6
#define CT_DACSTATE     0x3c7   /* read only */
#define CT_READINDEX    0x3c7   /* write only */
#define CT_WRITEINDEX   0x3c8
#define CT_DACDATA      0x3c9

/* extended VGA */
#define CT_FP_INDEX     0x3d0
#define CT_FP_DATA      0x3d1
#define CT_MM_INDEX     0x3d2
#define CT_MM_DATA      0x3d3
#define CT_CONF_INDEX   0x3d6
#define CT_CONF_DATA    0x3d7

/* offsets in aperture */
#define CT_OFF_FB       0x00000000
#define CT_OFF_BITBLT   0x00400000
#define CT_OFF_DRAW     0x00400040
#define CT_OFF_DATA     0x00410000

#define CT_OFF_BE       0x00800000

/* blitter registers */
#define CT_BLT_STRIDE   CT_OFF_BITBLT
        /* 
         * upper 16 bit are destination stride in bytes
         * lower 16 bit are source stride in bytes
         */
         
#define CT_BLT_BG       CT_OFF_BITBLT + 0x04
#define CT_BLT_FG       CT_OFF_BITBLT + 0x08
#define CT_BLT_EXPCTL   CT_OFF_BITBLT + 0x0c    /* expansion control */
        #define LEFT_CLIPPING_MSK       0x0000003f
        #define MONO_RIGHT_CLIPPING_MSK 0x00003f00
        #define MONO_INITIAL_DISCARD    0x003f0000
        #define MONO_SRC_ALIGN_MASK     0x07000000
        #define MONO_SRC_ALIGN_BIT      0x01000000
        #define MONO_SRC_ALIGN_BYTE     0x02000000
        #define MONO_SRC_ALIGN_WORD     0x03000000
        #define MONO_SRC_ALIGN_LONG     0x04000000
        #define MONO_SRC_ALIGN_LONGLONG 0x05000000
        #define MONO_SELECT_ALT_FG_BG   0x08000000 /* use CT_SRC_EXP_* */
        
#define CT_BLT_CONTROL  CT_OFF_BITBLT + 0x10
        #define BLT_ROP_MASK            0x000000ff
        #define BLT_START_RIGHT         0x00000100 /* 0 for start left */
        #define BLT_START_BOTTOM        0x00000200 /* 0 for start top */
        #define BLT_SRC_IS_CPU          0x00000400 /* 0 for vram source */
        #define BLT_SRC_IS_MONO         0x00001000
        #define BLT_MONO_TRANSPARENCY   0x00002000
        #define BLT_COLOR_COMPARE_MASK  0x0001c000 /* 0 for no color keying */
        #define BLT_PAT_TRANSPARENCY    0x00020000 /* pattern is transparent */
        #define BLT_PAT_IS_MONO         0x00040000
        #define BLT_PAT_IS_SOLID        0x00080000 /* ignore pattern */
        #define BLT_PAT_VERT_ALIGN_MASK 0x00700000
        #define BLT_IS_BUSY             0x80000000

#define ROP_COPY        0xcc
#define ROP_NOT_SRC     0x33
#define ROP_NOT_DST     0x55
#define ROP_PAT         0xf0

#define CT_BLT_PATTERN  CT_OFF_BITBLT + 0x14 /* address in vram */
#define CT_BLT_SRCADDR  CT_OFF_BITBLT + 0x18
#define CT_BLT_DSTADDR  CT_OFF_BITBLT + 0x1c

#define CT_BLT_SIZE     CT_OFF_BITBLT + 0x20    /* width and height */
/*
 * upper 16 bit are destination height
 * lower 16 bit are destination width in bytes
 */

#define CT_SRC_EXP_BG   CT_OFF_BITBLT + 0x24
#define CT_SRC_EXP_FG   CT_OFF_BITBLT + 0x28

/* extension registers ( via CT_CONF */
#define XR_VENDOR_LO            0x00
#define XR_VENDOR_HI            0x01
#define XR_DEVICE_LO            0x02
#define XR_DEVICE_HI            0x03
#define XR_REVISION             0x04
#define XR_LINEAR_BASE_LO       0x05
#define XR_LINEAR_BASE_HI       0x06

#define XR_CONFIGURATION        0x08
        #define BUS_PCI         0x01
        #define BUS_VL          0x00
        #define ENABLE_PCI      0x02

#define XR_IO_CONTROL           0x09
        #define ENABLE_CRTC_EXT 0x01
        #define ENABLE_ATTR_EXT 0x02
        
#define XR_ADDR_MAPPING         0x0a
        #define ENABLE_MAPPING  0x01    /* in VGA window */
        #define ENABLE_LINEAR   0x02
        #define ENABLE_PACKED   0x04
        #define FB_SWAP_NONE    0x00
        #define FB_SWAP_16      0x10
        #define FB_SWAP_32      0x20

#define XR_BURST_WRITE_MODE     0x0b

#define XR_PAGE_SELECT          0x0e

#define XR_BITBLT_CONTROL0      0x20
        #define BLITTER_BUSY    0x01
        #define BLITTER_RESET   0x02
        #define BLITTER_8BIT    0x00
        #define BLITTER_16BIT   0x10
        #define BLITTER_24BIT   0x20
        #define BLITTER_32BIT   0x30    /* reserved */
        
#define XR_DRAM_ACCESS_CONTROL  0x40
        #define ENABLE_64BIT    0x01
        #define DISABLE_WRAP    0x02    /* otherwise only 256kB */
        #define EXTENDED_TEXT   0x10
        
#define XR_DRAM_TYPE            0x41
        #define DRAM_FASTPAGE   0x00
        #define DRAM_EDO        0x01
        
#define XR_DRAM_CONFIG          0x42
        #define DRAM_8BIT_COL   0x00
        #define DRAM_9BIT_COL   0x01
        
#define XR_DRAM_INTERFACE       0x43
#define XR_DRAM_TIMING          0x44

#define XR_VIDEO_PIN_CONTROL    0x60
#define XR_DDC_SYNC_SELECT      0x61
        #define DDC_HSYNC_DATA  0x01
        #define DDC_HSYNC_OUT   0x02    /* hsync is controlled by above */
        #define DDC_VSYNC_DATA  0x04
        #define DDC_VSYNC_OUT   0x08    /* vsync is controlled by above */
        #define DDC_HV_POWERDOWN 0x10
        #define DDC_ENABLE_HSYNC 0x20
        #define DDC_ENABLE_VSYNC 0x40
        
/*
 * upper 6 bit define if corresponding bits in DATA are input or output 
 * 1 selects output
 */
#define XR_GPIO_CONTROL         0x62    
#define XR_GPIO_DATA            0x63

#define XR_PIN_TRISTATE_CONTROL 0x67

#define XR_CONFIG_PINS_0        0x70
#define XR_CONFIG_PINS_1        0x71

#define XR_PIXEL_PIPELINE_CTL_0 0x80
        #define ENABLE_EXTENDED_PALETTE 0x01
        #define ENABLE_CRT_OVERSCAN     0x02
        #define ENABLE_PANEL_OVERSCAN   0x04
        #define ENABLE_EXTENDED_STATUS  0x08
        #define ENABLE_CURSOR_1         0x10
        #define ENABLE_PIXEL_AVERAGING  0x20
        #define SELECT_PIXEL_STREAM     0x40    /* 1 for P1 */
        #define ENABLE_8BIT_DAC         0x80    /* 6 bit otherwise */
        
#define XR_PIXEL_PIPELINE_CTL_1 0x81
        #define COLOR_VGA               0x00
        #define COLOR_8BIT_EXTENDED     0x02
        #define COLOR_15BIT             0x04
        #define COLOR_16BIT             0x05
        #define COLOR_24BIT             0x06
        #define COLOR_32BIT             0x07
        
#define XR_PIXEL_PIPELINE_CTL_2 0x82
        #define ENABLE_BLANK_PEDESTAL   0x01
        #define ENABLE_SYNC_ON_GREEN    0x02
        #define ENABLE_VIDEO_GAMMA      0x04
        #define ENABLE_GRAPHICS_GAMMA   0x08
        
#define XR_CURSOR_1_CTL         0xa0
#define XR_CURSOR_1_VERT_EXT    0xa1
#define XR_CURSOR_1_BASEADDR_LO 0xa2
#define XR_CURSOR_1_BASEADDR_HI 0xa3
#define XR_CURSOR_1_X_LO        0xa4
#define XR_CURSOR_1_X_HI        0xa5
#define XR_CURSOR_1_Y_LO        0xa6
#define XR_CURSOR_1_Y_HI        0xa7

#define XR_CURSOR_2_CTL         0xa8
#define XR_CURSOR_2_VERT_EXT    0xa9
#define XR_CURSOR_2_BASEADDR_LO 0xaa
#define XR_CURSOR_2_BASEADDR_HI 0xab
#define XR_CURSOR_2_X_LO        0xac
#define XR_CURSOR_2_X_HI        0xad
#define XR_CURSOR_2_Y_LO        0xae
#define XR_CURSOR_2_Y_HI        0xaf

#define XR_VCLOCK_0_M           0xc0
#define XR_VCLOCK_0_N           0xc1
#define XR_VCLOCK_0_MN_MSBS     0xc2
#define XR_VCLOCK_0_DIV_SELECT  0xc3

#define XR_VCLOCK_1_M           0xc4
#define XR_VCLOCK_1_N           0xc5
#define XR_VCLOCK_1_MN_MSBS     0xc6
#define XR_VCLOCK_1_DIV_SELECT  0xc7

#define XR_VCLOCK_2_M           0xc8
#define XR_VCLOCK_2_N           0xc9
#define XR_VCLOCK_2_MN_MSBS     0xca
#define XR_VCLOCK_2_DIV_SELECT  0xcb

#define XR_MEMCLOCK_M           0xcc
#define XR_MEMCLOCK_N           0xcd
#define XR_MEMCLOCK_DIV_SELECT  0xce
#define XR_CLOCK_CONFIG         0xcf

#define XR_MODULE_POWER_DOWN    0xd0
#define XR_DOWN_COUNTER         0xd2

#define XR_SOFTWARE_FLAG_0      0xe0
#define XR_SOFTWARE_FLAG_1      0xe1
#define XR_SOFTWARE_FLAG_2      0xe2
#define XR_SOFTWARE_FLAG_3      0xe3
#define XR_SOFTWARE_FLAG_4      0xe4
#define XR_SOFTWARE_FLAG_5      0xe5
#define XR_SOFTWARE_FLAG_6      0xe6
#define XR_SOFTWARE_FLAG_7      0xe7

#define XR_TEST_BLOCK_SELECT    0xf8
#define XR_TEST_CONTROL_PORT    0xf9
#define XR_TEST_DATA_PORT       0xfa
#define XR_SCAN_TEST_CONTROL_0  0xfb
#define XR_SCAN_TEST_CONTROL_1  0xfc

/* flat panel control registers, via CT_FP_* */
#define FP_FEATURE              0x00
        #define PANEL_EXISTS    0x01
        #define POPUP_EXISTS    0x04
        
#define FP_CRT_FP_CONTROL       0x01
        #define ENABLE_CRT      0x01
        #define ENABLE_PANEL    0x02
        
#define FP_MODE_CONTROL         0x02
#define FP_DOT_CLOCK_SOURCE     0x03
        #define FP_CLOCK_0      0x00
        #define FP_CLOCK_1      0x04
        #define FP_CLOCK_2      0x08
        #define USE_VIDEO_CLOCK 0x00
        #define USE_MEM_CLOCK   0x10
        
#define FP_POWER_SEQ_DELAY      0x04
/*
 * upper 4 bits select power up delay in 3.4ms increments
 * lower 4 bits select power down delay in 29ms increments
 */

#define FP_POWER_DOWN_CTL_1     0x05
/* the lower 3 bits select how many refresh cycles per scanline are preformed */
        #define PANEL_POWER_OFF 0x08
        #define HOST_STANDBY    0x10
        #define PANEL_TRISTATE  0x20
        #define NO_SEFL_REFRESH 0x40
        #define PANEL_INACTIVE  0x80

/* these bits are effective when the panel is powered down */
#define FP_POWER_DOWN_CTL_0     0x06
        #define FP_VGA_PALETTE_POWERDOWN        0x01
        #define FP_VGA_PALETTE_ENABLE           0x02
        #define FP_ENABLE_SYNC                  0x04
        
#define FP_PIN_POLARITY         0x08
        #define FP_DISPLAY_NEGATIVE     0x02
        #define FP_HSYNC_NEGATIVE       0x04
        #define FP_VSYNC_NEGATIVE       0x08
        #define FP_TEXT_VIDEO_INVERT    0x10
        #define FP_GRAPHICS_INVERT      0x20
        #define CRT_HSYNC_NEGATIVE      0x40
        #define CRT_VSYNC_NEGATIVE      0x80
        
#define FP_OUTPUT_DRIVE         0x0a
        #define VL_THRESHOLD_5V         0x02    /* 3.3v otherwise */
        #define FP_DRIVE_HIGH           0x04    /* req. with 3.3v */
        #define BUS_INTERFACE_LOW       0x08    /* req. with 3.3v */
        #define MEM_DRIVE_HIGHER        0x10
        #define MEM_C_DRIVE_HIGHER      0x20
        #define SYNC_DRIVE_HIGHER       0x40
        
#define FP_PIN_CONTROL_1        0x0b
        #define DISPLAY_ENABLE_ON_69    0x01    /* M signal otherwise */
        #define DISPLAY_ENABLE_ON_68    0x02    /* FP Hsync otherwise */
        #define COMPOSITE_SYNC_ON_65    0x04    /* separate otherwise */
        #define BACKLIGHT_ON_61         0x08    /* on 54 otherwise */
        #define GPIO_ON_154             0x10
        #define SIMPLE_COMPOSITE_SYNC   0x20
        #define MEM_C_TRISTATE          0x80
        
#define FP_PIN_CONTROL_2        0x0c
        #define ACTI_ON_53              0x00
        #define COMPOSITE_SYNC_ON_53    0x08
        #define GPIO_IN_ON_53           0x10
        #define GPIO_OUT_ON_53          0x18
        #define ENABKL_ON_54            0x00
        #define COMPOSITE_SYNC_ON_54    0x40
        #define GPIO_IN_ON_54           0x80
        #define GPIO_OUT_ON_54          0xc0
        
#define FP_ACTIVITY_CONTROL     0x0f
/* the lower 5 bits select a timeout in 28.1s increments */
        #define PANEL_OFF_ON_TIMEOUT    0x40 /* backlight off otherwise */
        #define ENABLE_ACTIVITY_TIMER   0x80
        
#define FP_PANEL_FORMAT_0       0x10
        #define SINGLE_PANEL_SINGLE_DRIVE       0x00
        #define DUAL_PANEL_DUAL_DRIVE           0x03
        #define MONO_NTSC                       0x00
        #define MONO_EQUIV_WEIGHT               0x04
        #define MONO_GREEN_ONLY                 0x08
        #define COLOUR_PANEL                    0x0c
        #define SHIFT_CLOCK_DIVIDER_MASK        0x70
        
#define FP_PANEL_FORMAT_1       0x11
        
#define FP_PANEL_FORMAT_2       0x12
#define FP_PANEL_FORMAT_3       0x13

#define FP_FRC_OPTION_SELECT    0x16
#define FP_POLYNOMIAL_FRC_CTL   0x17

#define FP_TEXTMODE_CONTROL     0x18
#define FP_BLINK_RATE_CONTROL   0x19
#define FP_FB_CONTROL           0x1a

#define FP_ACDCLK_CONTROL       0x1e
#define FP_DIAGNOSTIC           0x1f

#define FP_HSIZE_LSB            0x20 /* panel size - 1 */
#define FP_HSYNC_START          0x21 /* value - 1 */
#define FP_HSYNC_END            0x22
#define FP_HTOTAL_LSB           0x23 /* value - 5 */
#define FP_HSYNC_DELAY_LSB      0x24
#define FP_HORZ_OVERFLOW_1      0x25
/*
 * upper 4 bits are upper 4 bits of FP_HSYNC_START
 * lower 4 bits are upper 4 bits of FP_HSIZE_LSB
 */
 
#define FP_HORZ_OVERFLOW_2      0x26
/*
 * upper 4 bits are upper 4 bits of FP_HSYNC_DELAY_LSB
 * lower 4 bits are upper 4 bits of FP_HTOTAL_LSB
 */
 
#define FP_HSYNC_WIDTH_DISABLE  0x27
/* lower 7 bits are HSYNC width - 1 */
        #define DELAY_DISABLE   0x80
        
#define FP_VSIZE_LSB            0x30 /* panel size - 1 */
#define FP_VSYNC_START          0x31 /* value - 1 */
#define FP_VSYNC_END            0x32 /* value - 1 */
#define FP_VTOTAL_LSB           0x33 /* value - 2 */
#define FP_VSYNC_DELAY_LSB      0x34 /* value - 1 */
#define FP_VERT_OVERFLOW_1      0x35
/*
 * upper 4 bits are upper 4 bits of FP_VSYNC_START
 * lower 4 bits are upper 4 bits of FP_VSIZE_LSB
 */
 
#define FP_VERT_OVERFLOW_2      0x36
/*
 * upper 4 bits are upper 4 bits of FP_VSYNC_DELAY_LSB
 * lower 4 bits are upper 4 bits of FP_VTOTAL_LSB
 */

#define FP_VSYNC_DISABLE        0x37
        #define FP_VSYNC_WIDTH_MASK     0x38 /* value - 1 */
        #define FP_VSYNC_IS_CRT_VSYNC   0x40
        #define FP_VSYNC_DELAY_DISABLE  0x80
        
#define FP_HORZ_COMPENSATION    0x40
#define FP_VERT_COMPENSATION    0x41
#define FP_VERT_COMPENSATION2   0x48

#define FP_TEXT_VSTRETCH_0_MSB  0x49
#define FP_TEXT_VSTRETCH_0_LSB  0x4a
#define FP_TEXT_VSTRETCH_1_MSB  0x4b
#define FP_TEXT_VSTRETCH_1_LSB  0x4c
#define FP_TEXT_LINE_REPL       0x4d
#define FP_SEL_VSTRETCH_DISABLE 0x4e



#endif