1 /* $NetBSD: weaselreg.h,v 1.1 2002/01/01 16:48:34 hpeyerl Exp $ */
4 * Copyright (c) 2001 The NetBSD Foundation, Inc.
7 * This code is derived from software contributed to The NetBSD Foundation
8 * by Herb Peyerl and Jason Thorpe.
10 * Redistribution and use in source and binary forms, with or without
11 * modification, are permitted provided that the following conditions
13 * 1. Redistributions of source code must retain the above copyright
14 * notice, this list of conditions and the following disclaimer.
15 * 2. Redistributions in binary form must reproduce the above copyright
16 * notice, this list of conditions and the following disclaimer in the
17 * documentation and/or other materials provided with the distribution.
19 * THIS SOFTWARE IS PROVIDED BY THE NETBSD FOUNDATION, INC. AND CONTRIBUTORS
20 * ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED
21 * TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
22 * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS
23 * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
24 * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
25 * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
26 * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
27 * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
28 * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
29 * POSSIBILITY OF SUCH DAMAGE.
33 #ifndef _DEV_PCI_WEASELREG_H_
34 #define _DEV_PCI_WEASELREG_H_
37 * PCI-Weasel configuration block.
39 #define CFG_VERSION_2 0x02
40 struct weasel_config_block
{
41 uint8_t cfg_version
; /* version of config */
42 uint8_t weasel_attn
; /* attention character */
43 uint8_t debug
; /* debug level */
44 uint8_t reset_pc_on_boot
; /* reset PC Weasel on boot */
45 uint8_t duart_baud
; /* UART baud rate */
46 uint8_t duart_parity
; /* 0=none, 1=even, 2=odd */
47 uint8_t duart_bits
; /* 7 or 8 */
48 uint8_t enable_duart_switching
; /* UART switching mode */
49 uint8_t wdt_allow
; /* WDOG is allowed */
50 uint16_t wdt_msec
; /* WDOG period in msec. */
51 uint8_t duart_flow
; /* RTS/CTS enabled */
52 uint8_t break_passthru
; /* BRK passed through to 16550 */
53 uint8_t serial_number
[10]; /* board serial number */
54 uint8_t default_partition
; /* default Weasel boot image */
55 uint8_t color
; /* use color */
56 uint8_t future_use
[229]; /* reserved for future use */
57 uint8_t cksum
; /* always last element. */
60 #define WEASEL_DATA_RD 0x00
61 #define OS_RET_WDT_ACTIVE 0x01
62 #define OS_RET_WDT_INACTIVE 0x02
63 #define OS_RET_PONG 0x03
65 #define WEASEL_DATA_WR 0x01
66 #define OS_CMD_WDT_ENABLE 0x01
67 #define OS_CMD_WDT_DISABLE 0x02
68 #define OS_CMD_WDT_QUERY 0x03
69 #define OS_CMD_SHOW_CONFIG 0x04
70 #define OS_CMD_QUERY_SW_VER 0x05
71 #define OS_CMD_QUERY_HW_VER 0x06
72 #define OS_CMD_QUERY_L_VER 0x07
73 #define OS_CMD_PING 0x08
74 #define OS_CMD_QUERY_VB_VER 0x09
75 #define OS_CMD_QUERT_BR_VER 0x0a
76 #define OS_CMD_RESET_SM 0xff
78 #define WEASEL_STATUS 0x02
79 #define OS_WS_HOST_WRITE 0x00
80 #define OS_WS_HOST_READ 0x01
81 #define OS_WS_WDT_RDY 0x02
82 #define OS_WS_BUSY 0xff
84 #define WEASEL_HOST_STATUS 0x03
85 #define OS_HS_WEASEL_WRITE 0x00
86 #define OS_HS_WEASEL_READ 0x01
87 #define OS_HS_WDT_RDY 0x02
89 #define WEASEL_CHALLENGE 0x04
91 #define WEASEL_RESPONSE 0x05
93 #endif /* _DEV_PCI_WEASELREG_H_ */