Expand PMF_FN_* macros.
[netbsd-mini2440.git] / sys / dev / pci / arcmsrvar.h
blob5d10858d8b9b14695a4fc78acda01c5ce74b0813
1 /* $NetBSD: arcmsrvar.h,v 1.12 2008/04/03 13:59:01 xtraeme Exp $ */
2 /* Derived from $OpenBSD: arc.c,v 1.68 2007/10/27 03:28:27 dlg Exp $ */
4 /*
5 * Copyright (c) 2007 Juan Romero Pardines <xtraeme@netbsd.org>
6 * Copyright (c) 2006 David Gwynne <dlg@openbsd.org>
8 * Permission to use, copy, modify, and distribute this software for any
9 * purpose with or without fee is hereby granted, provided that the above
10 * copyright notice and this permission notice appear in all copies.
12 * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
13 * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
14 * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
15 * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
16 * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
17 * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
18 * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
21 #ifndef _PCI_ARCMSRVAR_H_
22 #define _PCI_ARCMSRVAR_H_
24 #define ARC_PCI_BAR PCI_MAPREG_START
26 #define ARC_REG_INB_MSG0 0x0010
27 #define ARC_REG_INB_MSG0_NOP (0x00000000)
28 #define ARC_REG_INB_MSG0_GET_CONFIG (0x00000001)
29 #define ARC_REG_INB_MSG0_SET_CONFIG (0x00000002)
30 #define ARC_REG_INB_MSG0_ABORT_CMD (0x00000003)
31 #define ARC_REG_INB_MSG0_STOP_BGRB (0x00000004)
32 #define ARC_REG_INB_MSG0_FLUSH_CACHE (0x00000005)
33 #define ARC_REG_INB_MSG0_START_BGRB (0x00000006)
34 #define ARC_REG_INB_MSG0_CHK331PENDING (0x00000007)
35 #define ARC_REG_INB_MSG0_SYNC_TIMER (0x00000008)
36 #define ARC_REG_INB_MSG1 0x0014
37 #define ARC_REG_OUTB_ADDR0 0x0018
38 #define ARC_REG_OUTB_ADDR1 0x001c
39 #define ARC_REG_OUTB_ADDR1_FIRMWARE_OK (1<<31)
40 #define ARC_REG_INB_DOORBELL 0x0020
41 #define ARC_REG_INB_DOORBELL_WRITE_OK (1<<0)
42 #define ARC_REG_INB_DOORBELL_READ_OK (1<<1)
43 #define ARC_REG_OUTB_DOORBELL 0x002c
44 #define ARC_REG_OUTB_DOORBELL_WRITE_OK (1<<0)
45 #define ARC_REG_OUTB_DOORBELL_READ_OK (1<<1)
46 #define ARC_REG_INTRSTAT 0x0030
47 #define ARC_REG_INTRSTAT_MSG0 (1<<0)
48 #define ARC_REG_INTRSTAT_MSG1 (1<<1)
49 #define ARC_REG_INTRSTAT_DOORBELL (1<<2)
50 #define ARC_REG_INTRSTAT_POSTQUEUE (1<<3)
51 #define ARC_REG_INTRSTAT_PCI (1<<4)
52 #define ARC_REG_INTRMASK 0x0034
53 #define ARC_REG_INTRMASK_MSG0 (1<<0)
54 #define ARC_REG_INTRMASK_MSG1 (1<<1)
55 #define ARC_REG_INTRMASK_DOORBELL (1<<2)
56 #define ARC_REG_INTRMASK_POSTQUEUE (1<<3)
57 #define ARC_REG_INTRMASK_PCI (1<<4)
58 #define ARC_REG_POST_QUEUE 0x0040
59 #define ARC_REG_POST_QUEUE_ADDR_SHIFT 5
60 #define ARC_REG_POST_QUEUE_IAMBIOS (1<<30)
61 #define ARC_REG_POST_QUEUE_BIGFRAME (1<<31)
62 #define ARC_REG_REPLY_QUEUE 0x0044
63 #define ARC_REG_REPLY_QUEUE_ADDR_SHIFT 5
64 #define ARC_REG_REPLY_QUEUE_ERR (1<<28)
65 #define ARC_REG_REPLY_QUEUE_IAMBIOS (1<<30)
66 #define ARC_REG_MSGBUF 0x0a00
67 #define ARC_REG_MSGBUF_LEN 1024
68 #define ARC_REG_IOC_WBUF_LEN 0x0e00
69 #define ARC_REG_IOC_WBUF 0x0e04
70 #define ARC_REG_IOC_RBUF_LEN 0x0f00
71 #define ARC_REG_IOC_RBUF 0x0f04
72 #define ARC_REG_IOC_RWBUF_MAXLEN 124 /* for both RBUF and WBUF */
74 struct arc_msg_firmware_info {
75 uint32_t signature;
76 #define ARC_FWINFO_SIGNATURE_GET_CONFIG (0x87974060)
77 uint32_t request_len;
78 uint32_t queue_len;
79 uint32_t sdram_size;
80 uint32_t sata_ports;
81 uint8_t vendor[40];
82 uint8_t model[8];
83 uint8_t fw_version[16];
84 uint8_t device_map[16];
85 } __packed;
87 struct arc_msg_scsicmd {
88 uint8_t bus;
89 uint8_t target;
90 uint8_t lun;
91 uint8_t function;
93 uint8_t cdb_len;
94 uint8_t sgl_len;
95 uint8_t flags;
96 #define ARC_MSG_SCSICMD_FLAG_SGL_BSIZE_512 (1<<0)
97 #define ARC_MSG_SCSICMD_FLAG_FROM_BIOS (1<<1)
98 #define ARC_MSG_SCSICMD_FLAG_WRITE (1<<2)
99 #define ARC_MSG_SCSICMD_FLAG_SIMPLEQ (0x00)
100 #define ARC_MSG_SCSICMD_FLAG_HEADQ (0x08)
101 #define ARC_MSG_SCSICMD_FLAG_ORDERQ (0x10)
102 uint8_t reserved;
104 uint32_t context;
105 uint32_t data_len;
107 #define ARC_MSG_CDBLEN 16
108 uint8_t cdb[ARC_MSG_CDBLEN];
110 uint8_t status;
111 #define ARC_MSG_STATUS_SELTIMEOUT 0xf0
112 #define ARC_MSG_STATUS_ABORTED 0xf1
113 #define ARC_MSG_STATUS_INIT_FAIL 0xf2
114 #define ARC_MSG_SENSELEN 15
115 uint8_t sense_data[ARC_MSG_SENSELEN];
117 /* followed by an sgl */
118 } __packed;
120 struct arc_sge {
121 uint32_t sg_hdr;
122 #define ARC_SGE_64BIT (1<<24)
123 uint32_t sg_lo_addr;
124 uint32_t sg_hi_addr;
125 } __packed;
127 #define ARC_MAX_TARGET 16
128 #define ARC_MAX_LUN 8
129 #define ARC_MAX_IOCMDLEN 512
130 #define ARC_BLOCKSIZE 512
133 * the firmware deals with up to 256 or 512 byte command frames.
137 * sizeof(struct arc_msg_scsicmd) + (sizeof(struct arc_sge) * 38) == 508.
139 #define ARC_SGL_MAXLEN 38
141 * sizeof(struct arc_msg_scsicmd) + (sizeof(struct arc_sge) * 17) == 252.
143 #define ARC_SGL_256LEN 17
145 struct arc_io_cmd {
146 struct arc_msg_scsicmd cmd;
147 struct arc_sge sgl[ARC_SGL_MAXLEN];
148 } __packed;
151 * definitions of the firmware commands sent via the doorbells.
153 struct arc_fw_hdr {
154 uint8_t byte1;
155 uint8_t byte2;
156 uint8_t byte3;
157 } __packed;
159 struct arc_fw_bufhdr {
160 struct arc_fw_hdr hdr;
161 uint16_t len;
162 } __packed;
164 /* Firmware command codes */
165 #define ARC_FW_CHECK_PASS 0x14 /* opcode + 1 byte length + password */
166 #define ARC_FW_GETEVENTS 0x1a /* opcode + 1 byte for page 0/1/2/3 */
167 #define ARC_FW_GETHWMON 0x1b /* opcode + arc_fw_hwmon */
168 #define ARC_FW_RAIDINFO 0x20 /* opcode + raid# */
169 #define ARC_FW_VOLINFO 0x21 /* opcode + vol# */
170 #define ARC_FW_DISKINFO 0x22 /* opcode + physdisk# */
171 #define ARC_FW_SYSINFO 0x23 /* opcode. reply is fw_sysinfo */
172 #define ARC_FW_CLEAREVENTS 0x24 /* opcode only */
173 #define ARC_FW_MUTE_ALARM 0x30 /* opcode only */
174 #define ARC_FW_SET_ALARM 0x31 /* opcode + 1 byte for setting */
175 #define ARC_FW_SET_ALARM_DISABLE 0x00
176 #define ARC_FW_SET_ALARM_ENABLE 0x01
177 #define ARC_FW_SET_PASS 0x32 /* opcode + 1 byte length + password */
178 #define ARC_FW_REBUILD_PRIO 0x34 /* Rebuild priority for disks */
179 #define ARC_FW_REBUILD_PRIO_ULTRALOW (1<<0)
180 #define ARC_FW_REBUILD_PRIO_LOW (1<<1)
181 #define ARC_FW_REBUILD_PRIO_NORMAL (1<<2)
182 #define ARC_FW_REBUILD_PRIO_HIGH (1<<3)
183 #define ARC_FW_SET_MAXATA_MODE 0x35 /* opcode + 1 byte mode */
184 #define ARC_FW_SET_MAXATA_MODE_133 (1<<0)
185 #define ARC_FW_SET_MAXATA_MODE_100 (1<<1)
186 #define ARC_FW_SET_MAXATA_MODE_66 (1<<2)
187 #define ARC_FW_SET_MAXATA_MODE_33 (1<<3)
188 #define ARC_FW_NOP 0x38 /* opcode only */
190 * Structure for ARC_FW_CREATE_PASSTHRU:
192 * byte 2 command code 0x40
193 * byte 3 device #
194 * byte 4 scsi channel (0/1)
195 * byte 5 scsi id (0/15)
196 * byte 6 scsi lun (0/7)
197 * byte 7 tagged queue (1 enabled)
198 * byte 8 cache mode (1 enabled)
199 * byte 9 max speed ((0/1/2/3/4 -> 33/66/100/133/150)
201 #define ARC_FW_CREATE_PASSTHRU 0x40
202 #define ARC_FW_DELETE_PASSTHRU 0x42 /* opcode + device# */
205 * Structure for ARC_FW_CREATE_RAIDSET:
207 * byte 2 command code 0x50
208 * byte 3-6 device mask
209 * byte 7-22 raidset name (byte 7 == 0 use default)
211 #define ARC_FW_CREATE_RAIDSET 0x50
212 #define ARC_FW_DELETE_RAIDSET 0x51 /* opcode + raidset# */
213 #define ARC_FW_CREATE_HOTSPARE 0x54 /* opcode + 4 bytes device mask */
214 #define ARC_FW_DELETE_HOTSPARE 0x55 /* opcode + 4 bytes device mask */
217 * Structure for ARC_FW_CREATE_VOLUME/ARC_FW_MODIFY_VOLUME:
219 * byte 2 command code 0x60
220 * byte 3 raidset#
221 * byte 4-19 volume set name (byte 4 == 0 use default)
222 * byte 20-27 volume capacity in blocks
223 * byte 28 raid level
224 * byte 29 stripe size
225 * byte 30 channel
226 * byte 31 ID
227 * byte 32 LUN
228 * byte 33 1 enable tag queuing
229 * byte 33 1 enable cache
230 * byte 35 speed 0/1/2/3/4 -> 33/66/100/133/150
231 * byte 36 1 for quick init (only for CREATE_VOLUME)
233 #define ARC_FW_CREATE_VOLUME 0x60
234 #define ARC_FW_MODIFY_VOLUME 0x61
235 #define ARC_FW_DELETE_VOLUME 0x62 /* opcode + vol# */
236 #define ARC_FW_START_CHECKVOL 0x63 /* opcode + vol# */
237 #define ARC_FW_STOP_CHECKVOL 0x64 /* opcode only */
239 /* Status codes for the firmware command codes */
240 #define ARC_FW_CMD_OK 0x41
241 #define ARC_FW_CMD_RAIDINVAL 0x42
242 #define ARC_FW_CMD_VOLINVAL 0x43
243 #define ARC_FW_CMD_NORAID 0x44
244 #define ARC_FW_CMD_NOVOLUME 0x45
245 #define ARC_FW_CMD_NOPHYSDRV 0x46
246 #define ARC_FW_CMD_PARAM_ERR 0x47
247 #define ARC_FW_CMD_UNSUPPORTED 0x48
248 #define ARC_FW_CMD_DISKCFG_CHGD 0x49
249 #define ARC_FW_CMD_PASS_INVAL 0x4a
250 #define ARC_FW_CMD_NODISKSPACE 0x4b
251 #define ARC_FW_CMD_CHECKSUM_ERR 0x4c
252 #define ARC_FW_CMD_PASS_REQD 0x4d
254 struct arc_fw_hwmon {
255 uint8_t nfans;
256 uint8_t nvoltages;
257 uint8_t ntemps;
258 uint8_t npower;
259 uint16_t fan0; /* RPM */
260 uint16_t fan1; /* RPM */
261 uint16_t voltage_orig0; /* original value * 1000 */
262 uint16_t voltage_val0; /* value */
263 uint16_t voltage_orig1; /* original value * 1000 */
264 uint16_t voltage_val1; /* value */
265 uint16_t voltage_orig2;
266 uint16_t voltage_val2;
267 uint8_t temp0;
268 uint8_t temp1;
269 uint8_t pwr_indicator; /* (bit0 : power#0, bit1 : power#1) */
270 uint8_t ups_indicator;
271 } __packed;
273 struct arc_fw_comminfo {
274 uint8_t baud_rate;
275 uint8_t data_bits;
276 uint8_t stop_bits;
277 uint8_t parity;
278 uint8_t flow_control;
279 } __packed;
281 struct arc_fw_scsiattr {
282 uint8_t channel; /* channel for SCSI target (0/1) */
283 uint8_t target;
284 uint8_t lun;
285 uint8_t tagged;
286 uint8_t cache;
287 uint8_t speed;
288 } __packed;
290 struct arc_fw_raidinfo {
291 uint8_t set_name[16];
292 uint32_t capacity;
293 uint32_t capacity2;
294 uint32_t fail_mask;
295 uint8_t device_array[32];
296 uint8_t member_devices;
297 uint8_t new_member_devices;
298 uint8_t raid_state;
299 uint8_t volumes;
300 uint8_t volume_list[16];
301 uint8_t reserved1[3];
302 uint8_t free_segments;
303 uint32_t raw_stripes[8];
304 uint8_t reserved2[12];
305 } __packed;
307 struct arc_fw_volinfo {
308 uint8_t set_name[16];
309 uint32_t capacity;
310 uint32_t capacity2;
311 uint32_t fail_mask;
312 uint32_t stripe_size; /* in blocks */
313 uint32_t new_fail_mask;
314 uint32_t new_stripe_size;
315 uint32_t volume_status;
316 #define ARC_FW_VOL_STATUS_NORMAL 0x00
317 #define ARC_FW_VOL_STATUS_INITTING (1<<0)
318 #define ARC_FW_VOL_STATUS_FAILED (1<<1)
319 #define ARC_FW_VOL_STATUS_MIGRATING (1<<2)
320 #define ARC_FW_VOL_STATUS_REBUILDING (1<<3)
321 #define ARC_FW_VOL_STATUS_NEED_INIT (1<<4)
322 #define ARC_FW_VOL_STATUS_NEED_MIGRATE (1<<5)
323 #define ARC_FW_VOL_STATUS_INIT_FLAG (1<<6)
324 #define ARC_FW_VOL_STATUS_NEED_REGEN (1<<7)
325 #define ARC_FW_VOL_STATUS_CHECKING (1<<8)
326 #define ARC_FW_VOL_STATUS_NEED_CHECK (1<<9)
327 uint32_t progress;
328 struct arc_fw_scsiattr scsi_attr;
329 uint8_t member_disks;
330 uint8_t raid_level;
331 #define ARC_FW_VOL_RAIDLEVEL_0 0x00
332 #define ARC_FW_VOL_RAIDLEVEL_1 0x01
333 #define ARC_FW_VOL_RAIDLEVEL_3 0x02
334 #define ARC_FW_VOL_RAIDLEVEL_5 0x03
335 #define ARC_FW_VOL_RAIDLEVEL_6 0x04
336 #define ARC_FW_VOL_RAIDLEVEL_PASSTHRU 0x05
337 uint8_t new_member_disks;
338 uint8_t new_raid_level;
339 uint8_t raid_set_number;
340 uint8_t reserved[5];
341 } __packed;
343 struct arc_fw_diskinfo {
344 uint8_t model[40];
345 uint8_t serial[20];
346 uint8_t firmware_rev[8];
347 uint32_t capacity;
348 uint32_t capacity2;
349 uint8_t device_state;
350 #define ARC_FW_DISK_NORMAL 0x88 /* disk attached/initialized */
351 #define ARC_FW_DISK_PASSTHRU 0x8a /* pass through disk in normal state */
352 #define ARC_FW_DISK_HOTSPARE 0xa8 /* hotspare disk in normal state */
353 #define ARC_FW_DISK_UNUSED 0xc8 /* free/unused disk in normal state */
354 #define ARC_FW_DISK_FAILED 0x10 /* disk in failed state */
355 uint8_t pio_mode;
356 uint8_t current_udma_mode;
357 uint8_t udma_mode;
358 uint8_t drive_select;
359 uint8_t raid_number; /* 0xff unowned */
360 struct arc_fw_scsiattr scsi_attr;
361 uint8_t reserved[40];
362 } __packed;
364 struct arc_fw_sysinfo {
365 uint8_t vendor_name[40];
366 uint8_t serial_number[16];
367 uint8_t firmware_version[16];
368 uint8_t boot_version[16];
369 uint8_t mb_version[16];
370 uint8_t model_name[8];
372 uint8_t local_ip[4];
373 uint8_t current_ip[4];
375 uint32_t time_tick;
376 uint32_t cpu_speed;
377 uint32_t icache;
378 uint32_t dcache;
379 uint32_t scache;
380 uint32_t memory_size;
381 uint32_t memory_speed;
382 uint32_t events;
384 uint8_t gsiMacAddress[6];
385 uint8_t gsiDhcp;
387 uint8_t alarm;
388 uint8_t channel_usage;
389 uint8_t max_ata_mode;
390 uint8_t sdram_ecc;
391 uint8_t rebuild_priority;
392 struct arc_fw_comminfo comm_a;
393 struct arc_fw_comminfo comm_b;
394 uint8_t ide_channels;
395 uint8_t scsi_host_channels;
396 uint8_t ide_host_channels;
397 uint8_t max_volume_set;
398 uint8_t max_raid_set;
399 uint8_t ether_port;
400 uint8_t raid6_engine;
401 uint8_t reserved[75];
402 } __packed;
405 * autconf(9) glue.
407 struct arc_ccb;
408 TAILQ_HEAD(arc_ccb_list, arc_ccb);
410 struct arc_softc {
411 struct scsipi_channel sc_chan;
412 struct scsipi_adapter sc_adapter;
414 pci_chipset_tag_t sc_pc;
415 pcitag_t sc_tag;
417 bus_space_tag_t sc_iot;
418 bus_space_handle_t sc_ioh;
419 bus_size_t sc_ios;
420 bus_dma_tag_t sc_dmat;
422 void *sc_ih;
424 int sc_req_count;
426 struct arc_dmamem *sc_requests;
427 struct arc_ccb *sc_ccbs;
428 struct arc_ccb_list sc_ccb_free;
430 struct lwp *sc_lwp;
431 volatile int sc_talking;
432 kmutex_t sc_mutex;
433 kcondvar_t sc_condvar;
434 krwlock_t sc_rwlock;
436 struct sysmon_envsys *sc_sme;
437 envsys_data_t *sc_sensors;
438 int sc_nsensors;
440 size_t sc_maxraidset; /* max raid sets */
441 size_t sc_maxvolset; /* max volume sets */
442 size_t sc_cchans; /* connected channels */
444 device_t sc_dev; /* self */
445 device_t sc_scsibus_dv;
449 * interface for scsi midlayer to talk to.
451 void arc_scsi_cmd(struct scsipi_channel *, scsipi_adapter_req_t, void *);
454 * code to deal with getting bits in and out of the bus space.
456 uint32_t arc_read(struct arc_softc *, bus_size_t);
457 void arc_read_region(struct arc_softc *, bus_size_t, void *,
458 size_t);
459 void arc_write(struct arc_softc *, bus_size_t, uint32_t);
460 void arc_write_region(struct arc_softc *, bus_size_t, void *,
461 size_t);
462 int arc_wait_eq(struct arc_softc *, bus_size_t, uint32_t,
463 uint32_t);
464 int arc_wait_ne(struct arc_softc *, bus_size_t, uint32_t,
465 uint32_t);
466 int arc_msg0(struct arc_softc *, uint32_t);
468 #define arc_push(_s, _r) arc_write((_s), ARC_REG_POST_QUEUE, (_r))
469 #define arc_pop(_s) arc_read((_s), ARC_REG_REPLY_QUEUE)
472 * wrap up the bus_dma api.
474 struct arc_dmamem {
475 bus_dmamap_t adm_map;
476 bus_dma_segment_t adm_seg;
477 size_t adm_size;
478 void *adm_kva;
480 #define ARC_DMA_MAP(_adm) ((_adm)->adm_map)
481 #define ARC_DMA_DVA(_adm) ((_adm)->adm_map->dm_segs[0].ds_addr)
482 #define ARC_DMA_KVA(_adm) ((void *)(_adm)->adm_kva)
484 struct arc_dmamem *arc_dmamem_alloc(struct arc_softc *, size_t);
485 void arc_dmamem_free(struct arc_softc *,
486 struct arc_dmamem *);
489 * stuff to manage a scsi command.
491 struct arc_ccb {
492 struct arc_softc *ccb_sc;
493 int ccb_id;
495 struct scsipi_xfer *ccb_xs;
497 bus_dmamap_t ccb_dmamap;
498 bus_addr_t ccb_offset;
499 struct arc_io_cmd *ccb_cmd;
500 uint32_t ccb_cmd_post;
502 TAILQ_ENTRY(arc_ccb) ccb_link;
505 int arc_alloc_ccbs(device_t);
506 struct arc_ccb *arc_get_ccb(struct arc_softc *);
507 void arc_put_ccb(struct arc_softc *, struct arc_ccb *);
508 int arc_load_xs(struct arc_ccb *);
509 int arc_complete(struct arc_softc *, struct arc_ccb *, int);
510 void arc_scsi_cmd_done(struct arc_softc *, struct arc_ccb *,
511 uint32_t);
514 * real stuff for dealing with the hardware.
516 int arc_map_pci_resources(device_t, struct pci_attach_args *);
517 void arc_unmap_pci_resources(struct arc_softc *);
518 int arc_query_firmware(device_t);
521 * stuff to do messaging via the doorbells.
523 void arc_lock(struct arc_softc *);
524 void arc_unlock(struct arc_softc *);
525 void arc_wait(struct arc_softc *);
526 uint8_t arc_msg_cksum(void *, uint16_t);
527 int arc_msgbuf(struct arc_softc *, void *, size_t, void *, size_t);
529 #endif /* ! _PCI_ARCMSRVAR_H_ */