Expand PMF_FN_* macros.

[netbsd-mini2440.git] / sys / dev / pci / if_bgevar.h

/*      $NetBSD: if_bgereg.h,v 1.51 2009/04/19 11:10:36 msaitoh Exp $   */
/*
 * Copyright (c) 2001 Wind River Systems
 * Copyright (c) 1997, 1998, 1999, 2001
 *      Bill Paul <wpaul@windriver.com>.  All rights reserved.
 *
 * Redistribution and use in source and binary forms, with or without
 * modification, are permitted provided that the following conditions
 * are met:
 * 1. Redistributions of source code must retain the above copyright
 *    notice, this list of conditions and the following disclaimer.
 * 2. Redistributions in binary form must reproduce the above copyright
 *    notice, this list of conditions and the following disclaimer in the
 *    documentation and/or other materials provided with the distribution.
 * 3. All advertising materials mentioning features or use of this software
 *    must display the following acknowledgement:
 *      This product includes software developed by Bill Paul.
 * 4. Neither the name of the author nor the names of any co-contributors
 *    may be used to endorse or promote products derived from this software
 *    without specific prior written permission.
 *
 * THIS SOFTWARE IS PROVIDED BY Bill Paul AND CONTRIBUTORS ``AS IS'' AND
 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
 * ARE DISCLAIMED.  IN NO EVENT SHALL Bill Paul OR THE VOICES IN HIS HEAD
 * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
 * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
 * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
 * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
 * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
 * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF
 * THE POSSIBILITY OF SUCH DAMAGE.
 *
 * $FreeBSD: if_bgereg.h,v 1.1.2.7 2002/11/02 18:17:55 mp Exp $
 */

/*
 * BCM570x memory map. The internal memory layout varies somewhat
 * depending on whether or not we have external SSRAM attached.
 * The BCM5700 can have up to 16MB of external memory. The BCM5701
 * is apparently not designed to use external SSRAM. The mappings
 * up to the first 4 send rings are the same for both internal and
 * external memory configurations. Note that mini RX ring space is
 * only available with external SSRAM configurations, which means
 * the mini RX ring is not supported on the BCM5701.
 *
 * The NIC's memory can be accessed by the host in one of 3 ways:
 *
 * 1) Indirect register access. The MEMWIN_BASEADDR and MEMWIN_DATA
 *    registers in PCI config space can be used to read any 32-bit
 *    address within the NIC's memory.
 *
 * 2) Memory window access. The MEMWIN_BASEADDR register in PCI config
 *    space can be used in conjunction with the memory window in the
 *    device register space at offset 0x8000 to read any 32K chunk
 *    of NIC memory.
 *
 * 3) Flat mode. If the 'flat mode' bit in the PCI state register is
 *    set, the device I/O mapping consumes 32MB of host address space,
 *    allowing all of the registers and internal NIC memory to be
 *    accessed directly. NIC memory addresses are offset by 0x01000000.
 *    Flat mode consumes so much host address space that it is not
 *    recommended.
 */

#ifndef _DEV_PCI_IF_BGEVAR_H_
#define _DEV_PCI_IF_BGEVAR_H_

#include <machine/bus.h>
#include <net/if_ether.h>
#include <dev/pci/pcivar.h>

static __inline void
bge_set_hostaddr(volatile bge_hostaddr *x, bus_addr_t y)
{
        x->bge_addr_lo = y & 0xffffffff;
        if (sizeof (bus_addr_t) == 8)
                x->bge_addr_hi = (u_int64_t)y >> 32;
        else
                x->bge_addr_hi = 0;
}

#define RCB_WRITE_4(sc, rcb, offset, val) \
        bus_space_write_4(sc->bge_btag, sc->bge_bhandle, \
                          rcb + offsetof(struct bge_rcb, offset), val)

/*
 * Other utility macros.
 */
#define BGE_INC(x, y)   (x) = (x + 1) % y

/*
 * Register access macros. The Tigon always uses memory mapped register
 * accesses and all registers must be accessed with 32 bit operations.
 */

#define CSR_WRITE_4(sc, reg, val)       \
        bus_space_write_4(sc->bge_btag, sc->bge_bhandle, reg, val)

#define CSR_READ_4(sc, reg)             \
        bus_space_read_4(sc->bge_btag, sc->bge_bhandle, reg)

#define BGE_SETBIT(sc, reg, x)  \
        CSR_WRITE_4(sc, reg, (CSR_READ_4(sc, reg) | x))
#define BGE_CLRBIT(sc, reg, x)  \
        CSR_WRITE_4(sc, reg, (CSR_READ_4(sc, reg) & ~x))

#define PCI_SETBIT(pc, tag, reg, x)     \
        pci_conf_write(pc, tag, reg, (pci_conf_read(pc, tag, reg) | x))
#define PCI_CLRBIT(pc, tag, reg, x)     \
        pci_conf_write(pc, tag, reg, (pci_conf_read(pc, tag, reg) & ~x))

/*
 * Memory management stuff. Note: the SSLOTS, MSLOTS and JSLOTS
 * values are tuneable. They control the actual amount of buffers
 * allocated for the standard, mini and jumbo receive rings.
 */

#define BGE_SSLOTS      256
#define BGE_MSLOTS      256
#define BGE_JSLOTS      384
#define BGE_RSLOTS      256

#define BGE_JRAWLEN (BGE_JUMBO_FRAMELEN + ETHER_ALIGN)
#define BGE_JLEN (BGE_JRAWLEN + (sizeof(u_int64_t) - \
        (BGE_JRAWLEN % sizeof(u_int64_t))))
#define BGE_JPAGESZ PAGE_SIZE
#define BGE_RESID (BGE_JPAGESZ - (BGE_JLEN * BGE_JSLOTS) % BGE_JPAGESZ)
#define BGE_JMEM ((BGE_JLEN * BGE_JSLOTS) + BGE_RESID)

/*
 * Ring structures. Most of these reside in host memory and we tell
 * the NIC where they are via the ring control blocks. The exceptions
 * are the tx and command rings, which live in NIC memory and which
 * we access via the shared memory window.
 */
struct bge_ring_data {
        struct bge_rx_bd        bge_rx_std_ring[BGE_STD_RX_RING_CNT];
        struct bge_rx_bd        bge_rx_jumbo_ring[BGE_JUMBO_RX_RING_CNT];
        struct bge_rx_bd        bge_rx_return_ring[BGE_RETURN_RING_CNT];
        struct bge_tx_bd        bge_tx_ring[BGE_TX_RING_CNT];
        struct bge_status_block bge_status_block;
        struct bge_tx_desc      *bge_tx_ring_nic;/* pointer to shared mem */
        struct bge_cmd_desc     *bge_cmd_ring;  /* pointer to shared mem */
        struct bge_gib          bge_info;
};

#define BGE_RING_DMA_ADDR(sc, offset) \
        ((sc)->bge_ring_map->dm_segs[0].ds_addr + \
        offsetof(struct bge_ring_data, offset))

/*
 * Number of DMA segments in a TxCB. Note that this is carefully
 * chosen to make the total struct size an even power of two. It's
 * critical that no TxCB be split across a page boundary since
 * no attempt is made to allocate physically contiguous memory.
 *
 */
#if 0   /* pre-TSO values */
#define BGE_TXDMA_MAX   ETHER_MAX_LEN_JUMBO
#ifdef _LP64
#define BGE_NTXSEG      30
#else
#define BGE_NTXSEG      31
#endif
#else   /* TSO values */
#define BGE_TXDMA_MAX   (round_page(IP_MAXPACKET))      /* for TSO */
#ifdef _LP64
#define BGE_NTXSEG      120     /* XXX just a guess */
#else
#define BGE_NTXSEG      124     /* XXX just a guess */
#endif
#endif  /* TSO values */


/*
 * Mbuf pointers. We need these to keep track of the virtual addresses
 * of our mbuf chains since we can only convert from physical to virtual,
 * not the other way around.
 */
struct bge_chain_data {
        struct mbuf             *bge_tx_chain[BGE_TX_RING_CNT];
        struct mbuf             *bge_rx_std_chain[BGE_STD_RX_RING_CNT];
        struct mbuf             *bge_rx_jumbo_chain[BGE_JUMBO_RX_RING_CNT];
        struct mbuf             *bge_rx_mini_chain[BGE_MINI_RX_RING_CNT];
        bus_dmamap_t            bge_rx_std_map[BGE_STD_RX_RING_CNT];
        bus_dmamap_t            bge_rx_jumbo_map;
        /* Stick the jumbo mem management stuff here too. */
        void *                  bge_jslots[BGE_JSLOTS];
        void *                  bge_jumbo_buf;
};

#define BGE_JUMBO_DMA_ADDR(sc, m) \
        ((sc)->bge_cdata.bge_rx_jumbo_map->dm_segs[0].ds_addr + \
         (mtod((m), char *) - (char *)(sc)->bge_cdata.bge_jumbo_buf))

struct bge_type {
        u_int16_t               bge_vid;
        u_int16_t               bge_did;
        char                    *bge_name;
};

#define BGE_TIMEOUT             1000
#define BGE_TXCONS_UNSET                0xFFFF  /* impossible value */

struct bge_jpool_entry {
        int                             slot;
        SLIST_ENTRY(bge_jpool_entry)    jpool_entries;
};

struct bge_bcom_hack {
        int                     reg;
        int                     val;
};

struct txdmamap_pool_entry {
        bus_dmamap_t dmamap;
        SLIST_ENTRY(txdmamap_pool_entry) link;
};

struct bge_softc {
        device_t                bge_dev;
        struct ethercom         ethercom;               /* interface info */
        bus_space_handle_t      bge_bhandle;
        bus_space_tag_t         bge_btag;
        void                    *bge_intrhand;
        pci_chipset_tag_t       sc_pc;
        pcitag_t                sc_pcitag;

        struct mii_data         bge_mii;
        struct ifmedia          bge_ifmedia;    /* media info */
        u_int8_t                bge_extram;     /* has external SSRAM */
        u_int32_t               bge_return_ring_cnt;
        u_int32_t               bge_tx_prodidx;
        bus_dma_tag_t           bge_dmatag;
        u_int32_t               bge_chipid;
        u_int32_t               bge_local_ctrl_reg;
        struct bge_ring_data    *bge_rdata;     /* rings */
        struct bge_chain_data   bge_cdata;      /* mbufs */
        bus_dmamap_t            bge_ring_map;
        u_int16_t               bge_tx_saved_considx;
        u_int16_t               bge_rx_saved_considx;
        u_int16_t               bge_ev_saved_considx;
        u_int16_t               bge_std;        /* current std ring head */
        u_int16_t               bge_jumbo;      /* current jumo ring head */
        SLIST_HEAD(__bge_jfreehead, bge_jpool_entry)    bge_jfree_listhead;
        SLIST_HEAD(__bge_jinusehead, bge_jpool_entry)   bge_jinuse_listhead;
        u_int32_t               bge_stat_ticks;
        u_int32_t               bge_rx_coal_ticks;
        u_int32_t               bge_tx_coal_ticks;
        u_int32_t               bge_rx_max_coal_bds;
        u_int32_t               bge_tx_max_coal_bds;
        u_int32_t               bge_tx_buf_ratio;
        uint32_t                bge_sts;
#define BGE_STS_LINK            0x00000001      /* MAC link status */
#define BGE_STS_LINK_EVT        0x00000002      /* pending link event */
#define BGE_STS_AUTOPOLL        0x00000004      /* PHY auto-polling  */
#define BGE_STS_BIT(sc, x)      ((sc)->bge_sts & (x))
#define BGE_STS_SETBIT(sc, x)   ((sc)->bge_sts |= (x))
#define BGE_STS_CLRBIT(sc, x)   ((sc)->bge_sts &= ~(x))
        int                     bge_if_flags;
        uint32_t                bge_flags;
        int                     bge_flowflags;
#ifdef BGE_EVENT_COUNTERS
        /*
         * Event counters.
         */
        struct evcnt bge_ev_intr;       /* interrupts */
        struct evcnt bge_ev_tx_xoff;    /* send PAUSE(len>0) packets */
        struct evcnt bge_ev_tx_xon;     /* send PAUSE(len=0) packets */
        struct evcnt bge_ev_rx_xoff;    /* receive PAUSE(len>0) packets */
        struct evcnt bge_ev_rx_xon;     /* receive PAUSE(len=0) packets */
        struct evcnt bge_ev_rx_macctl;  /* receive MAC control packets */
        struct evcnt bge_ev_xoffentered;/* XOFF state entered */
#endif /* BGE_EVENT_COUNTERS */
        int                     bge_txcnt;
        struct callout          bge_timeout;
        char                    *bge_vpd_prodname;
        char                    *bge_vpd_readonly;
        int                     bge_pending_rxintr_change;
        SLIST_HEAD(, txdmamap_pool_entry) txdma_list;
        struct txdmamap_pool_entry *txdma[BGE_TX_RING_CNT];

#if NRND > 0
        rndsource_element_t     rnd_source;     /* random source */
#endif
};

#endif /* _DEV_PCI_IF_BGEVAR_H_ */