Expand PMF_FN_* macros.

[netbsd-mini2440.git] / sys / dev / pci / if_ntwoc_pci.c

/*      $NetBSD: if_ntwoc_pci.c,v 1.25 2009/05/12 08:23:00 cegger Exp $ */

/*
 * Copyright (c) 1998 Vixie Enterprises
 * All rights reserved.
 *
 * Redistribution and use in source and binary forms, with or without
 * modification, are permitted provided that the following conditions
 * are met:
 *
 * 1. Redistributions of source code must retain the above copyright
 *    notice, this list of conditions and the following disclaimer.
 * 2. Redistributions in binary form must reproduce the above copyright
 *    notice, this list of conditions and the following disclaimer in the
 *    documentation and/or other materials provided with the distribution.
 * 3. Neither the name of Vixie Enterprises nor the names
 *    of its contributors may be used to endorse or promote products derived
 *    from this software without specific prior written permission.
 *
 * THIS SOFTWARE IS PROVIDED BY VIXIE ENTERPRISES AND
 * CONTRIBUTORS ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES,
 * INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
 * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
 * DISCLAIMED.  IN NO EVENT SHALL VIXIE ENTERPRISES OR
 * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
 * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
 * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
 * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
 * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
 * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT
 * OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
 * SUCH DAMAGE.
 *
 * This software has been written for Vixie Enterprises by Michael Graff
 * <explorer@flame.org>.  To learn more about Vixie Enterprises, see
 * ``http://www.vix.com''.
 */

#include <sys/cdefs.h>
__KERNEL_RCSID(0, "$NetBSD: if_ntwoc_pci.c,v 1.25 2009/05/12 08:23:00 cegger Exp $");

#include <sys/param.h>
#include <sys/systm.h>
#include <sys/device.h>
#include <sys/mbuf.h>
#include <sys/socket.h>

#include <net/if.h>

#include <sys/cpu.h>
#include <sys/bus.h>
#include <sys/intr.h>

#include <dev/pci/pcivar.h>
#include <dev/pci/pcireg.h>
#include <dev/pci/pcidevs.h>

#include <dev/ic/hd64570reg.h>
#include <dev/ic/hd64570var.h>

#include <dev/pci/if_ntwoc_pcireg.h>

#if 0
#define NTWO_DEBUG
#endif

#ifdef NTWO_DEBUG
#define NTWO_DPRINTF(x) printf x
#else
#define NTWO_DPRINTF(x)
#endif

/*
 * buffers per tx and rx channels, per port, and the size of each.
 * Don't use these constants directly, as they are really only hints.
 * Use the calculated values stored in struct sca_softc instead.
 *
 * Each must be at least 2, receive would be better at around 20 or so.
 *
 * XXX Due to a damned near impossible to track down bug, transmit buffers
 * MUST be 2, no more, no less.
 */
#ifndef NTWOC_NtxBUFS
#define NTWOC_NtxBUFS     40
#endif
#ifndef NTWOC_NrxBUFS
#define NTWOC_NrxBUFS     20
#endif

#if __NetBSD_Version__ >= 104160000
static  void ntwoc_pci_config_interrupts(device_t);
#else
#define SCA_BASECLOCK   16000000
#endif

/*
 * Card specific config register location
 */
#define PCI_CBMA_ASIC   0x10    /* Configuration Base Memory Address */
#define PCI_CBMA_SCA    0x18

struct ntwoc_pci_softc {
        /* Generic device stuff */
        struct device sc_dev;           /* Common to all devices */

        /* PCI chipset glue */
        pci_intr_handle_t *sc_ih;       /* Interrupt handler */
        pci_chipset_tag_t sc_sr;        /* PCI chipset handle */

        bus_space_tag_t sc_asic_iot;    /* space cookie (for ASIC) */
        bus_space_handle_t sc_asic_ioh; /* bus space handle (for ASIC) */

        struct sca_softc sc_sca;        /* the SCA itself */
};

static  int ntwoc_pci_match(device_t, cfdata_t, void *);
static  void ntwoc_pci_attach(device_t, device_t, void *);

static  int ntwoc_pci_alloc_dma(struct sca_softc *);
static  void ntwoc_pci_clock_callback(void *, int, int);
static  void ntwoc_pci_dtr_callback(void *, int, int);
static  void ntwoc_pci_get_clock(struct sca_port *, u_int8_t, u_int8_t,
    u_int8_t, u_int8_t);
static  int ntwoc_pci_intr(void *);
static  void ntwoc_pci_setup_dma(struct sca_softc *);
static  void ntwoc_pci_shutdown(void *sc);

CFATTACH_DECL(ntwoc_pci, sizeof(struct ntwoc_pci_softc),
    ntwoc_pci_match, ntwoc_pci_attach, NULL, NULL);

/*
 * Names for daughter card types.  These match the NTWOC_DB_* defines.
 */
const char *ntwoc_pci_db_names[] = {
        "V.35", "Unknown 0x01", "Test", "Unknown 0x03",
        "RS232", "Unknown 0x05", "RS422", "None"
};

/*
 * At least one implementation uses a somewhat strange register address
 * mapping.  If a card doesn't, define this to be a pass-through
 * macro.  (The ntwo driver needs this...)
 */
#define SCA_REG(y)  (((y) & 0x0002) ? (((y) & 0x00fd) + 0x100) : (y))

/*
 * functions that read and write to the sca registers
 */
static void
ntwoc_pci_sca_write_1(struct sca_softc *sc, u_int reg, u_int8_t val)
{
        bus_space_write_1(sc->sc_iot, sc->sc_ioh, SCA_REG(reg), val);
}

static void
ntwoc_pci_sca_write_2(struct sca_softc *sc, u_int reg, u_int16_t val)
{
        bus_space_write_2(sc->sc_iot, sc->sc_ioh, SCA_REG(reg), val);
}

static u_int8_t
ntwoc_pci_sca_read_1(struct sca_softc *sc, u_int reg)
{
        return
            bus_space_read_1(sc->sc_iot, sc->sc_ioh, SCA_REG(reg));
}

static u_int16_t
ntwoc_pci_sca_read_2(struct sca_softc *sc, u_int reg)
{
        return
            bus_space_read_2(sc->sc_iot, sc->sc_ioh, SCA_REG(reg));
}



static int
ntwoc_pci_match(device_t parent, cfdata_t match, void *aux)
{
        struct pci_attach_args *pa = (struct pci_attach_args *)aux;

        if ((PCI_VENDOR(pa->pa_id) == PCI_VENDOR_RISCOM)
            && (PCI_PRODUCT(pa->pa_id) == PCI_PRODUCT_RISCOM_N2))
                return 1;

        return 0;
}

static void
ntwoc_pci_attach(device_t parent, device_t self, void *aux)
{
        struct ntwoc_pci_softc *sc = device_private(self);
        struct pci_attach_args *pa = aux;
        struct sca_softc *sca = &sc->sc_sca;
        pci_intr_handle_t ih;
        const char *intrstr;
        pcireg_t csr;
        u_int8_t tmc, rdiv, tdiv;
        u_int16_t frontend_cr;
        u_int16_t db0, db1;
        u_int32_t flags;
        u_int numports;

        printf(": N2 Serial Interface\n");
        flags = device_cfdata(&sc->sc_dev)->cf_flags;

        /*
         * Map in the ASIC configuration space
         */
        if (pci_mapreg_map(pa, PCI_CBMA_ASIC, PCI_MAPREG_TYPE_MEM, 0,
                           &sc->sc_asic_iot, &sc->sc_asic_ioh, NULL, NULL)) {
                aprint_error_dev(&sc->sc_dev, "Can't map register space (ASIC)\n");
                return;
        }
        /*
         * Map in the serial controller configuration space
         */
        if (pci_mapreg_map(pa, PCI_CBMA_SCA, PCI_MAPREG_TYPE_MEM, 0,
                           &sca->sc_iot, &sca->sc_ioh, NULL, NULL)) {
                aprint_error_dev(&sc->sc_dev, "Can't map register space (SCA)\n");
                return;
        }

        /*
         * Enable the card
         */
        csr = pci_conf_read(pa->pa_pc, pa->pa_tag, PCI_COMMAND_STATUS_REG);
        pci_conf_write(pa->pa_pc, pa->pa_tag, PCI_COMMAND_STATUS_REG, csr);

        /*
         * Map and establish the interrupt
         */
        if (pci_intr_map(pa, &ih)) {
                aprint_error_dev(&sc->sc_dev, "couldn't map interrupt\n");
                return;
        }
        intrstr = pci_intr_string(pa->pa_pc, ih);
        sc->sc_ih = pci_intr_establish(pa->pa_pc, ih, IPL_NET, ntwoc_pci_intr,
            sc);
        if (sc->sc_ih == NULL) {
                aprint_error_dev(&sc->sc_dev, "couldn't establish interrupt");
                if (intrstr != NULL)
                        aprint_error(" at %s", intrstr);
                aprint_error("\n");
                return;
        }
        aprint_normal_dev(&sc->sc_dev, "interrupting at %s\n", intrstr);

        /*
         * Perform total black magic.  This is not only extremely
         * disgusting, but it should be explained a lot more in the
         * card's documentation.
         *
         * From what I gather, this does nothing more than configure the
         * PCI to ISA translator ASIC the N2pci card uses.
         *
         * From the FreeBSD driver:
         * offset
         *  0x00 - Map Range    - Mem-mapped to locate anywhere
         *  0x04 - Re-Map       - PCI address decode enable
         *  0x18 - Bus Region   - 32-bit bus, ready enable
         *  0x1c - Master Range - include all 16 MB
         *  0x20 - Master RAM   - Map SCA Base at 0
         *  0x28 - Master Remap - direct master memory enable
         *  0x68 - Interrupt    - Enable interrupt (0 to disable)
         */
        bus_space_write_4(sc->sc_asic_iot, sc->sc_asic_ioh,
                          0x00, 0xfffff000);
        bus_space_write_4(sc->sc_asic_iot, sc->sc_asic_ioh,
                          0x04, 1);
        bus_space_write_4(sc->sc_asic_iot, sc->sc_asic_ioh,
                          0x18, 0x40030043);
        bus_space_write_4(sc->sc_asic_iot, sc->sc_asic_ioh,
                          0x1c, 0xff000000);
        bus_space_write_4(sc->sc_asic_iot, sc->sc_asic_ioh,
                          0x20, 0);
        bus_space_write_4(sc->sc_asic_iot, sc->sc_asic_ioh,
                          0x28, 0xe9);
        bus_space_write_4(sc->sc_asic_iot, sc->sc_asic_ioh,
                          0x68, 0x10900);

        /*
         * pass the DMA tag to the SCA
         */
        sca->sc_usedma = 1;
        sca->scu_dmat = pa->pa_dmat;

        /*
         * Read the configuration information off the daughter card.
         */
        frontend_cr = bus_space_read_2(sca->sc_iot, sca->sc_ioh, NTWOC_FECR);
        NTWO_DPRINTF(("%s: frontend_cr = 0x%04x\n",
                      device_xname(&sc->sc_dev), frontend_cr));

        db0 = (frontend_cr & NTWOC_FECR_ID0) >> NTWOC_FECR_ID0_SHIFT;
        db1 = (frontend_cr & NTWOC_FECR_ID1) >> NTWOC_FECR_ID1_SHIFT;

        /*
         * Port 1 HAS to be present.  If it isn't, don't attach anything.
         */
        if (db0 == NTWOC_FE_ID_NONE) {
                printf("%s: no ports available\n", device_xname(&sc->sc_dev));
                return;
        }

        /*
         * Port 1 is present.  Now, check to see if port 2 is also
         * present.
         */
        numports = 1;
        if (db1 != NTWOC_FE_ID_NONE)
                numports++;

        printf("%s: %d port%s\n", device_xname(&sc->sc_dev), numports,
               (numports > 1 ? "s" : ""));
        printf("%s: port 0 interface card: %s\n", device_xname(&sc->sc_dev),
               ntwoc_pci_db_names[db0]);
        if (numports > 1)
                printf("%s: port 1 interface card: %s\n", device_xname(&sc->sc_dev),
                       ntwoc_pci_db_names[db1]);

        /*
         * enable the RS422 tristate transmit
         * diable clock output (use receiver clock for both)
         */
        frontend_cr |= (NTWOC_FECR_TE0 | NTWOC_FECR_TE1);
        frontend_cr &= ~(NTWOC_FECR_ETC0 | NTWOC_FECR_ETC1);
        bus_space_write_2(sc->sc_sca.sc_iot, sc->sc_sca.sc_ioh,
                          NTWOC_FECR, frontend_cr);

        /*
         * initialize the SCA.  This will allocate DMAable memory based
         * on the number of ports we passed in, the size of each
         * buffer, and the number of buffers per port.
         */
        sca->sc_parent = &sc->sc_dev;
        sca->sc_read_1 = ntwoc_pci_sca_read_1;
        sca->sc_read_2 = ntwoc_pci_sca_read_2;
        sca->sc_write_1 = ntwoc_pci_sca_write_1;
        sca->sc_write_2 = ntwoc_pci_sca_write_2;
        sca->sc_dtr_callback = ntwoc_pci_dtr_callback;
        sca->sc_clock_callback = ntwoc_pci_clock_callback;
        sca->sc_aux = sc;
        sca->sc_numports = numports;

        /*
         * get clock information from user
         */
        rdiv = (flags & NTWOC_FLAGS_RXDIV_MASK) >> NTWOC_FLAGS_RXDIV_SHIFT;
        if (rdiv > 9)
                panic("bad rx divisor in flags");

        tdiv = (flags & NTWOC_FLAGS_TXDIV_MASK) >> NTWOC_FLAGS_TXDIV_SHIFT;
        if (tdiv > 9)
                panic("bad tx divisor in flags");
        tmc = (flags & NTWOC_FLAGS_TMC_MASK) >> NTWOC_FLAGS_TMC_SHIFT;

        ntwoc_pci_get_clock(&sca->sc_ports[0], flags & NTWOC_FLAGS_CLK0_MASK,
            tmc, rdiv, tdiv);
        if (sca->sc_numports > 1)
                ntwoc_pci_get_clock(&sca->sc_ports[1],
                    (flags & NTWOC_FLAGS_CLK1_MASK) >> NTWOC_FLAGS_CLK1_SHIFT,
                    tmc, rdiv, tdiv);

        /* allocate DMA'able memory for card to use */
        ntwoc_pci_alloc_dma(sca);
        ntwoc_pci_setup_dma(sca);

        sca_init(sca);

        /*
         * always initialize port 0, since we have to have found it to
         * get this far.  If we have two ports, attach the second
         * as well.
         */
        sca_port_attach(sca, 0);
        if (numports == 2)
                sca_port_attach(sca, 1);

        /*
         * Add shutdown hook so that DMA is disabled prior to reboot. Not
         * doing do could allow DMA to corrupt kernel memory during the
         * reboot before the driver initializes.
         */
        shutdownhook_establish(ntwoc_pci_shutdown, sc);

#if __NetBSD_Version__ >= 104160000
        /*
         * defer getting the base clock until interrupts are enabled
         * (and thus we have microtime())
         */
        config_interrupts(self, ntwoc_pci_config_interrupts);
#else
        sca->sc_baseclock = SCA_BASECLOCK;
        sca_print_clock_info(&sc->sc_sca);
#endif
}

/*
 * extract the clock information for a port from the flags field
 */
static void
ntwoc_pci_get_clock(struct sca_port *scp, u_int8_t flags, u_int8_t tmc,
    u_int8_t rdiv, u_int8_t tdiv)
{
        scp->sp_eclock =
            (flags & NTWOC_FLAGS_ECLOCK_MASK) >> NTWOC_FLAGS_ECLOCK_SHIFT;
        scp->sp_rxs = rdiv;
        scp->sp_txs = tdiv;
        scp->sp_tmc = tmc;

        /* get rx source */
        switch ((flags & NTWOC_FLAGS_RXS_MASK) >> NTWOC_FLAGS_RXS_SHIFT) {
        case NTWOC_FLAGS_RXS_LINE:
                scp->sp_rxs = 0;
                break;
        case NTWOC_FLAGS_RXS_LINE_SN:
                scp->sp_rxs |= SCA_RXS_CLK_LINE_SN;
                break;
        case NTWOC_FLAGS_RXS_INTERNAL:
                scp->sp_rxs |= SCA_RXS_CLK_INTERNAL;
                break;
        case NTWOC_FLAGS_RXS_ADPLL_OUT:
                scp->sp_rxs |= SCA_RXS_CLK_ADPLL_OUT;
                break;
        case NTWOC_FLAGS_RXS_ADPLL_IN:
                scp->sp_rxs |= SCA_RXS_CLK_ADPLL_IN;
                break;
        default:
                panic("bad rx source in flags");
        }

        /* get tx source */
        switch ((flags & NTWOC_FLAGS_TXS_MASK) >> NTWOC_FLAGS_TXS_SHIFT) {
        case NTWOC_FLAGS_TXS_LINE:
                scp->sp_txs = 0;
                break;
        case NTWOC_FLAGS_TXS_INTERNAL:
                scp->sp_txs |= SCA_TXS_CLK_INTERNAL;
                break;
        case NTWOC_FLAGS_TXS_RXCLOCK:
                scp->sp_txs |= SCA_TXS_CLK_RXCLK;
                break;
        default:
                panic("bad rx source in flags");
        }
}


static int
ntwoc_pci_intr(void *arg)
{
        struct ntwoc_pci_softc *sc = (struct ntwoc_pci_softc *)arg;

        return sca_hardintr(&sc->sc_sca);
}

/*
 * shut down interrupts and DMA, so we don't trash the kernel on warm
 * boot.  Also, lower DTR on each port and disable card interrupts.
 */
static void
ntwoc_pci_shutdown(void *aux)
{
        struct ntwoc_pci_softc *sc = aux;
        u_int16_t fecr;

        /*
         * shut down the SCA ports
         */
        sca_shutdown(&sc->sc_sca);

        /*
         * disable interrupts for the whole card.  Black magic, see comment
         * above.
         */
        bus_space_write_4(sc->sc_asic_iot, sc->sc_asic_ioh,
                          0x68, 0x10900);

        /*
         * lower DTR on both ports
         */
        fecr = bus_space_read_2(sc->sc_sca.sc_iot,
                                sc->sc_sca.sc_ioh, NTWOC_FECR);
        fecr |= (NTWOC_FECR_DTR0 | NTWOC_FECR_DTR1);
        bus_space_write_2(sc->sc_sca.sc_iot, sc->sc_sca.sc_ioh,
                          NTWOC_FECR, fecr);
}

static void
ntwoc_pci_dtr_callback(void *aux, int port, int state)
{
        struct ntwoc_pci_softc *sc = aux;
        u_int16_t fecr;

        fecr = bus_space_read_2(sc->sc_sca.sc_iot,
                                sc->sc_sca.sc_ioh, NTWOC_FECR);

        NTWO_DPRINTF(("dtr: port == %d, state == %d, old fecr:  0x%04x\n",
                       port, state, fecr));

        if (port == 0) {
                if (state == 0)
                        fecr |= NTWOC_FECR_DTR0;
                else
                        fecr &= ~NTWOC_FECR_DTR0;
        } else {
                if (state == 0)
                        fecr |= NTWOC_FECR_DTR1;
                else
                        fecr &= ~NTWOC_FECR_DTR1;
        }

        NTWO_DPRINTF(("new fecr:  0x%04x\n", fecr));

        bus_space_write_2(sc->sc_sca.sc_iot, sc->sc_sca.sc_ioh,
                          NTWOC_FECR, fecr);
}

static void
ntwoc_pci_clock_callback(void *aux, int port, int enable)
{
        struct ntwoc_pci_softc *sc = aux;
        u_int16_t fecr;

        fecr = bus_space_read_2(sc->sc_sca.sc_iot,
                                sc->sc_sca.sc_ioh, NTWOC_FECR);

        NTWO_DPRINTF(("clk: port == %d, enable == %d, old fecr:  0x%04x\n",
                       port, enable, fecr));

        if (port == 0) {
                if (enable)
                        fecr |= NTWOC_FECR_ETC0;
                else
                        fecr &= ~NTWOC_FECR_ETC0;
        } else {
                if (enable)
                        fecr |= NTWOC_FECR_ETC1;
                else
                        fecr &= ~NTWOC_FECR_ETC1;
        }

        NTWO_DPRINTF(("new fecr:  0x%04x\n", fecr));

        bus_space_write_2(sc->sc_sca.sc_iot, sc->sc_sca.sc_ioh,
                          NTWOC_FECR, fecr);
}

static int
ntwoc_pci_alloc_dma(struct sca_softc *sc)
{
        u_int   allocsize;
        int     err;
        int     rsegs;
        u_int   bpp;

        /* first initialize the number of descriptors */
        sc->sc_ports[0].sp_nrxdesc = NTWOC_NrxBUFS;
        sc->sc_ports[0].sp_ntxdesc = NTWOC_NtxBUFS;
        if (sc->sc_numports == 2) {
                sc->sc_ports[1].sp_nrxdesc = NTWOC_NrxBUFS;
                sc->sc_ports[1].sp_ntxdesc = NTWOC_NtxBUFS;
        }

        NTWO_DPRINTF(("sizeof sca_desc_t: %d bytes\n", sizeof (sca_desc_t)));

        bpp = sc->sc_numports * (NTWOC_NtxBUFS + NTWOC_NrxBUFS);

        allocsize = bpp * (SCA_BSIZE + sizeof (sca_desc_t));

        /*
         * sanity checks:
         *
         * Check the total size of the data buffers, and so on.  The total
         * DMAable space needs to fit within a single 16M region, and the
         * descriptors need to fit within a 64K region.
         */
        if (allocsize > 16 * 1024 * 1024)
                return 1;
        if (bpp * sizeof (sca_desc_t) > 64 * 1024)
                return 1;

        sc->scu_allocsize = allocsize;

        /*
         * Allocate one huge chunk of memory.
         */
        if (bus_dmamem_alloc(sc->scu_dmat,
                             allocsize,
                             SCA_DMA_ALIGNMENT,
                             SCA_DMA_BOUNDARY,
                             &sc->scu_seg, 1, &rsegs, BUS_DMA_NOWAIT) != 0) {
                printf("Could not allocate DMA memory\n");
                return 1;
        }
        NTWO_DPRINTF(("DMA memory allocated:  %d bytes\n", allocsize));

        if (bus_dmamem_map(sc->scu_dmat, &sc->scu_seg, 1, allocsize,
                           &sc->scu_dma_addr, BUS_DMA_NOWAIT) != 0) {
                printf("Could not map DMA memory into kernel space\n");
                return 1;
        }
        NTWO_DPRINTF(("DMA memory mapped\n"));

        if (bus_dmamap_create(sc->scu_dmat, allocsize, 2,
                              allocsize, SCA_DMA_BOUNDARY,
                              BUS_DMA_NOWAIT, &sc->scu_dmam) != 0) {
                printf("Could not create DMA map\n");
                return 1;
        }
        NTWO_DPRINTF(("DMA map created\n"));

        err = bus_dmamap_load(sc->scu_dmat, sc->scu_dmam, sc->scu_dma_addr,
                              allocsize, NULL, BUS_DMA_NOWAIT);
        if (err != 0) {
                printf("Could not load DMA segment:  %d\n", err);
                return 1;
        }
        NTWO_DPRINTF(("DMA map loaded\n"));

        return 0;
}

/*
 * Take the memory allocated with sca_alloc_dma() and divide it among the
 * two ports.
 */
static void
ntwoc_pci_setup_dma(struct sca_softc *sc)
{
        sca_port_t *scp0, *scp1;
        u_int8_t  *vaddr0;
        u_int32_t paddr0;
        u_long addroff;

        /*
         * remember the physical address to 24 bits only, since the upper
         * 8 bits is programed into the device at a different layer.
         */
        paddr0 = (sc->scu_dmam->dm_segs[0].ds_addr & 0x00ffffff);
        vaddr0 = sc->scu_dma_addr;

        /*
         * if we have only one port it gets the full range.  If we have
         * two we need to do a little magic to divide things up.
         *
         * The descriptors will all end up in the front of the area, while
         * the remainder of the buffer is used for transmit and receive
         * data.
         *
         * -------------------- start of memory
         *    tx desc port 0
         *    rx desc port 0
         *    tx desc port 1
         *    rx desc port 1
         *    tx buffer port 0
         *    rx buffer port 0
         *    tx buffer port 1
         *    rx buffer port 1
         * -------------------- end of memory
         */
        scp0 = &sc->sc_ports[0];
        scp1 = &sc->sc_ports[1];

        scp0->sp_txdesc_p = paddr0;
        scp0->sp_txdesc = (sca_desc_t *)vaddr0;
        addroff = sizeof(sca_desc_t) * scp0->sp_ntxdesc;

        /*
         * point to the range following the tx descriptors, and
         * set the rx descriptors there.
         */
        scp0->sp_rxdesc_p = paddr0 + addroff;
        scp0->sp_rxdesc = (sca_desc_t *)(vaddr0 + addroff);
        addroff += sizeof(sca_desc_t) * scp0->sp_nrxdesc;

        if (sc->sc_numports == 2) {
                scp1->sp_txdesc_p = paddr0 + addroff;
                scp1->sp_txdesc = (sca_desc_t *)(vaddr0 + addroff);
                addroff += sizeof(sca_desc_t) * scp1->sp_ntxdesc;

                scp1->sp_rxdesc_p = paddr0 + addroff;
                scp1->sp_rxdesc = (sca_desc_t *)(vaddr0 + addroff);
                addroff += sizeof(sca_desc_t) * scp1->sp_nrxdesc;
        }

        /*
         * point to the memory following the descriptors, and set the
         * transmit buffer there.
         */
        scp0->sp_txbuf_p = paddr0 + addroff;
        scp0->sp_txbuf = vaddr0 + addroff;
        addroff += SCA_BSIZE * scp0->sp_ntxdesc;

        /*
         * lastly, skip over the transmit buffer and set up pointers into
         * the receive buffer.
         */
        scp0->sp_rxbuf_p = paddr0 + addroff;
        scp0->sp_rxbuf = vaddr0 + addroff;
        addroff += SCA_BSIZE * scp0->sp_nrxdesc;

        if (sc->sc_numports == 2) {
                scp1->sp_txbuf_p = paddr0 + addroff;
                scp1->sp_txbuf = vaddr0 + addroff;
                addroff += SCA_BSIZE * scp1->sp_ntxdesc;

                scp1->sp_rxbuf_p = paddr0 + addroff;
                scp1->sp_rxbuf = vaddr0 + addroff;
                addroff += SCA_BSIZE * scp1->sp_nrxdesc;
        }

        /*
         * as a consistancy check, addroff should be equal to the allocation
         * size.
         */
        if (sc->scu_allocsize != addroff)
                printf("ERROR:  scu_allocsize != addroff: %lu != %lu\n",
                       (u_long)sc->scu_allocsize, addroff);
}

#if __NetBSD_Version__ >= 104160000
static void
ntwoc_pci_config_interrupts(device_t self)
{
        struct ntwoc_pci_softc *sc;

        sc = (void *)self;
        sca_get_base_clock(&sc->sc_sca);
        sca_print_clock_info(&sc->sc_sca);
}
#endif