Sync usage with man page.

[netbsd-mini2440.git] / sys / arch / mips / sibyte / dev / sbmac.c

/* $NetBSD: sbmac.c,v 1.34 2009/10/26 19:16:57 cegger Exp $ */

/*
 * Copyright 2000, 2001, 2004
 * Broadcom Corporation. All rights reserved.
 *
 * This software is furnished under license and may be used and copied only
 * in accordance with the following terms and conditions.  Subject to these
 * conditions, you may download, copy, install, use, modify and distribute
 * modified or unmodified copies of this software in source and/or binary
 * form. No title or ownership is transferred hereby.
 *
 * 1) Any source code used, modified or distributed must reproduce and
 *    retain this copyright notice and list of conditions as they appear in
 *    the source file.
 *
 * 2) No right is granted to use any trade name, trademark, or logo of
 *    Broadcom Corporation.  The "Broadcom Corporation" name may not be
 *    used to endorse or promote products derived from this software
 *    without the prior written permission of Broadcom Corporation.
 *
 * 3) THIS SOFTWARE IS PROVIDED "AS-IS" AND ANY EXPRESS OR IMPLIED
 *    WARRANTIES, INCLUDING BUT NOT LIMITED TO, ANY IMPLIED WARRANTIES OF
 *    MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, OR
 *    NON-INFRINGEMENT ARE DISCLAIMED. IN NO EVENT SHALL BROADCOM BE LIABLE
 *    FOR ANY DAMAGES WHATSOEVER, AND IN PARTICULAR, BROADCOM SHALL NOT BE
 *    LIABLE FOR DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
 *    CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
 *    SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR
 *    BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
 *    WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE
 *    OR OTHERWISE), EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
 */

#include <sys/cdefs.h>
__KERNEL_RCSID(0, "$NetBSD: sbmac.c,v 1.34 2009/10/26 19:16:57 cegger Exp $");

#include "bpfilter.h"
#include "opt_inet.h"
#include "opt_ns.h"

#include <sys/param.h>
#include <sys/systm.h>
#include <sys/sockio.h>
#include <sys/mbuf.h>
#include <sys/malloc.h>
#include <sys/kernel.h>
#include <sys/socket.h>
#include <sys/queue.h>
#include <sys/device.h>

#include <net/if.h>
#include <net/if_arp.h>
#include <net/if_ether.h>
#include <net/if_dl.h>
#include <net/if_media.h>

#if NBPFILTER > 0
#include <net/bpf.h>
#endif

#ifdef INET
#include <netinet/in.h>
#include <netinet/if_inarp.h>
#endif

#ifdef NS
#include <netns/ns.h>
#include <netns/ns_if.h>
#endif

#include <machine/locore.h>

#include "sbobiovar.h"

#include <dev/mii/mii.h>
#include <dev/mii/miivar.h>
#include <dev/mii/mii_bitbang.h>

#include <mips/sibyte/include/sb1250_defs.h>
#include <mips/sibyte/include/sb1250_regs.h>
#include <mips/sibyte/include/sb1250_mac.h>
#include <mips/sibyte/include/sb1250_dma.h>
#include <mips/sibyte/include/sb1250_scd.h>

/* Simple types */

typedef u_long sbmac_port_t;
typedef uint64_t sbmac_physaddr_t;
typedef uint64_t sbmac_enetaddr_t;

typedef enum { sbmac_speed_auto, sbmac_speed_10,
               sbmac_speed_100, sbmac_speed_1000 } sbmac_speed_t;

typedef enum { sbmac_duplex_auto, sbmac_duplex_half,
               sbmac_duplex_full } sbmac_duplex_t;

typedef enum { sbmac_fc_auto, sbmac_fc_disabled, sbmac_fc_frame,
               sbmac_fc_collision, sbmac_fc_carrier } sbmac_fc_t;

typedef enum { sbmac_state_uninit, sbmac_state_off, sbmac_state_on,
               sbmac_state_broken } sbmac_state_t;


/* Macros */

#define SBMAC_EVENT_COUNTERS    /* Include counters for various events */

#define SBDMA_NEXTBUF(d, f)     ((f + 1) & (d)->sbdma_dscr_mask)

#define CACHELINESIZE 32
#define NUMCACHEBLKS(x) (((x)+CACHELINESIZE-1)/CACHELINESIZE)
#define KMALLOC(x) malloc((x), M_DEVBUF, M_DONTWAIT)
#define KVTOPHYS(x) kvtophys((vaddr_t)(x))

#ifdef SBMACDEBUG
#define dprintf(x)      printf x
#else
#define dprintf(x)
#endif

#define SBMAC_READCSR(t) mips3_ld((volatile uint64_t *) (t))
#define SBMAC_WRITECSR(t, v) mips3_sd((volatile uint64_t *) (t), (v))

#define PKSEG1(x) ((sbmac_port_t) MIPS_PHYS_TO_KSEG1(x))

/* These are limited to fit within one virtual page, and must be 2**N.  */
#define SBMAC_MAX_TXDESCR       256             /* should be 1024 */
#define SBMAC_MAX_RXDESCR       256             /* should be 512 */

#define ETHER_ALIGN     2

/* DMA Descriptor structure */

typedef struct sbdmadscr_s {
        uint64_t dscr_a;
        uint64_t dscr_b;
} sbdmadscr_t;


/* DMA Controller structure */

typedef struct sbmacdma_s {

        /*
         * This stuff is used to identify the channel and the registers
         * associated with it.
         */

        struct sbmac_softc *sbdma_eth;  /* back pointer to associated MAC */
        int             sbdma_channel;  /* channel number */
        int             sbdma_txdir;    /* direction (1=transmit) */
        int             sbdma_maxdescr; /* total # of descriptors in ring */
        sbmac_port_t    sbdma_config0;  /* DMA config register 0 */
        sbmac_port_t    sbdma_config1;  /* DMA config register 1 */
        sbmac_port_t    sbdma_dscrbase; /* Descriptor base address */
        sbmac_port_t    sbdma_dscrcnt;  /* Descriptor count register */
        sbmac_port_t    sbdma_curdscr;  /* current descriptor address */

        /*
         * This stuff is for maintenance of the ring
         */
        sbdmadscr_t     *sbdma_dscrtable;       /* base of descriptor table */
        struct mbuf     **sbdma_ctxtable;       /* context table, one per descr */
        unsigned int    sbdma_dscr_mask;        /* sbdma_maxdescr - 1 */
        paddr_t         sbdma_dscrtable_phys;   /* and also the phys addr */
        unsigned int    sbdma_add_index;        /* next dscr for sw to add */
        unsigned int    sbdma_rem_index;        /* next dscr for sw to remove */
} sbmacdma_t;


/* Ethernet softc structure */

struct sbmac_softc {

        /*
         * NetBSD-specific things
         */
        struct device   sc_dev;         /* base device (must be first) */
        struct ethercom sc_ethercom;    /* Ethernet common part */
        struct mii_data sc_mii;
        struct callout  sc_tick_ch;

        int             sbm_if_flags;
        void            *sbm_intrhand;

        /*
         * Controller-specific things
         */

        sbmac_port_t    sbm_base;       /* MAC's base address */
        sbmac_state_t   sbm_state;      /* current state */

        sbmac_port_t    sbm_macenable;  /* MAC Enable Register */
        sbmac_port_t    sbm_maccfg;     /* MAC Configuration Register */
        sbmac_port_t    sbm_fifocfg;    /* FIFO configuration register */
        sbmac_port_t    sbm_framecfg;   /* Frame configuration register */
        sbmac_port_t    sbm_rxfilter;   /* receive filter register */
        sbmac_port_t    sbm_isr;        /* Interrupt status register */
        sbmac_port_t    sbm_imr;        /* Interrupt mask register */

        sbmac_speed_t   sbm_speed;      /* current speed */
        sbmac_duplex_t  sbm_duplex;     /* current duplex */
        sbmac_fc_t      sbm_fc;         /* current flow control setting */
        int             sbm_rxflags;    /* received packet flags */

        u_char          sbm_hwaddr[ETHER_ADDR_LEN];

        sbmacdma_t      sbm_txdma;      /* for now, only use channel 0 */
        sbmacdma_t      sbm_rxdma;

        int             sbm_pass3_dma;  /* chip has pass3 SOC DMA features */

#ifdef SBMAC_EVENT_COUNTERS
        struct evcnt    sbm_ev_rxintr;  /* Rx interrupts */
        struct evcnt    sbm_ev_txintr;  /* Tx interrupts */
        struct evcnt    sbm_ev_txdrop;  /* Tx dropped due to no mbuf alloc failed */
        struct evcnt    sbm_ev_txstall; /* Tx stalled due to no descriptors free */

        struct evcnt    sbm_ev_txsplit; /* pass3 Tx split mbuf */
        struct evcnt    sbm_ev_txkeep;  /* pass3 Tx didn't split mbuf */
#endif
};


#ifdef SBMAC_EVENT_COUNTERS
#define SBMAC_EVCNT_INCR(ev)    (ev).ev_count++
#else
#define SBMAC_EVCNT_INCR(ev)    do { /* nothing */ } while (0)
#endif

/* Externs */

extern paddr_t kvtophys(vaddr_t);

/* Prototypes */

static void sbdma_initctx(sbmacdma_t *d, struct sbmac_softc *s, int chan,
    int txrx, int maxdescr);
static void sbdma_channel_start(sbmacdma_t *d);
static int sbdma_add_rcvbuffer(sbmacdma_t *d, struct mbuf *m);
static int sbdma_add_txbuffer(sbmacdma_t *d, struct mbuf *m);
static void sbdma_emptyring(sbmacdma_t *d);
static void sbdma_fillring(sbmacdma_t *d);
static void sbdma_rx_process(struct sbmac_softc *sc, sbmacdma_t *d);
static void sbdma_tx_process(struct sbmac_softc *sc, sbmacdma_t *d);
static void sbmac_initctx(struct sbmac_softc *s);
static void sbmac_channel_start(struct sbmac_softc *s);
static void sbmac_channel_stop(struct sbmac_softc *s);
static sbmac_state_t sbmac_set_channel_state(struct sbmac_softc *,
    sbmac_state_t);
static void sbmac_promiscuous_mode(struct sbmac_softc *sc, int onoff);
static void sbmac_init_and_start(struct sbmac_softc *sc);
static uint64_t sbmac_addr2reg(u_char *ptr);
static void sbmac_intr(void *xsc, uint32_t status, vaddr_t pc);
static void sbmac_start(struct ifnet *ifp);
static void sbmac_setmulti(struct sbmac_softc *sc);
static int sbmac_ether_ioctl(struct ifnet *ifp, u_long cmd, void *data);
static int sbmac_ioctl(struct ifnet *, u_long, void *);
static void sbmac_watchdog(struct ifnet *ifp);
static int sbmac_match(struct device *parent, struct cfdata *match, void *aux);
static void sbmac_attach(struct device *parent, struct device *self, void *aux);
static int sbmac_set_speed(struct sbmac_softc *s, sbmac_speed_t speed);
static int sbmac_set_duplex(struct sbmac_softc *s, sbmac_duplex_t duplex,
    sbmac_fc_t fc);
static void sbmac_tick(void *arg);


/* Globals */

CFATTACH_DECL(sbmac, sizeof(struct sbmac_softc),
    sbmac_match, sbmac_attach, NULL, NULL);

static uint32_t sbmac_mii_bitbang_read(struct device *self);
static void sbmac_mii_bitbang_write(struct device *self, uint32_t val);

static const struct mii_bitbang_ops sbmac_mii_bitbang_ops = {
        sbmac_mii_bitbang_read,
        sbmac_mii_bitbang_write,
        {
                (uint32_t)M_MAC_MDIO_OUT,       /* MII_BIT_MDO */
                (uint32_t)M_MAC_MDIO_IN,        /* MII_BIT_MDI */
                (uint32_t)M_MAC_MDC,            /* MII_BIT_MDC */
                0,                              /* MII_BIT_DIR_HOST_PHY */
                (uint32_t)M_MAC_MDIO_DIR        /* MII_BIT_DIR_PHY_HOST */
        }
};

static uint32_t
sbmac_mii_bitbang_read(struct device *self)
{
        struct sbmac_softc *sc = (void *) self;
        sbmac_port_t reg;

        reg = PKSEG1(sc->sbm_base + R_MAC_MDIO);
        return (uint32_t) SBMAC_READCSR(reg);
}

static void
sbmac_mii_bitbang_write(struct device *self, uint32_t val)
{
        struct sbmac_softc *sc = (void *) self;
        sbmac_port_t reg;

        reg = PKSEG1(sc->sbm_base + R_MAC_MDIO);

        SBMAC_WRITECSR(reg, (val &
            (M_MAC_MDC|M_MAC_MDIO_DIR|M_MAC_MDIO_OUT|M_MAC_MDIO_IN)));
}

/*
 * Read an PHY register through the MII.
 */
static int
sbmac_mii_readreg(struct device *self, int phy, int reg)
{

        return (mii_bitbang_readreg(self, &sbmac_mii_bitbang_ops, phy, reg));
}

/*
 * Write to a PHY register through the MII.
 */
static void
sbmac_mii_writereg(struct device *self, int phy, int reg, int val)
{

        mii_bitbang_writereg(self, &sbmac_mii_bitbang_ops, phy, reg, val);
}

static void
sbmac_mii_statchg(struct device *self)
{
        struct sbmac_softc *sc = (struct sbmac_softc *)self;
        sbmac_state_t oldstate;

        /* Stop the MAC in preparation for changing all of the parameters. */
        oldstate = sbmac_set_channel_state(sc, sbmac_state_off);

        switch (sc->sc_ethercom.ec_if.if_baudrate) {
        default:                /* if autonegotiation fails, assume 10Mbit */
        case IF_Mbps(10):
                sbmac_set_speed(sc, sbmac_speed_10);
                break;

        case IF_Mbps(100):
                sbmac_set_speed(sc, sbmac_speed_100);
                break;

        case IF_Mbps(1000):
                sbmac_set_speed(sc, sbmac_speed_1000);
                break;
        }

        if (sc->sc_mii.mii_media_active & IFM_FDX) {
                /* Configure for full-duplex */
                /* XXX: is flow control right for 10, 100? */
                sbmac_set_duplex(sc, sbmac_duplex_full, sbmac_fc_frame);
        } else {
                /* Configure for half-duplex */
                /* XXX: is flow control right? */
                sbmac_set_duplex(sc, sbmac_duplex_half, sbmac_fc_disabled);
        }

        /* And put it back into its former state. */
        sbmac_set_channel_state(sc, oldstate);
}

/*
 *  SBDMA_INITCTX(d, s, chan, txrx, maxdescr)
 *
 *  Initialize a DMA channel context.  Since there are potentially
 *  eight DMA channels per MAC, it's nice to do this in a standard
 *  way.
 *
 *  Input parameters:
 *      d - sbmacdma_t structure (DMA channel context)
 *      s - sbmac_softc structure (pointer to a MAC)
 *      chan - channel number (0..1 right now)
 *      txrx - Identifies DMA_TX or DMA_RX for channel direction
 *      maxdescr - number of descriptors
 *
 *  Return value:
 *      nothing
 */

static void
sbdma_initctx(sbmacdma_t *d, struct sbmac_softc *s, int chan, int txrx,
    int maxdescr)
{
        /*
         * Save away interesting stuff in the structure
         */

        d->sbdma_eth = s;
        d->sbdma_channel = chan;
        d->sbdma_txdir = txrx;

        /*
         * initialize register pointers
         */

        d->sbdma_config0 = PKSEG1(s->sbm_base +
            R_MAC_DMA_REGISTER(txrx, chan, R_MAC_DMA_CONFIG0));
        d->sbdma_config1 = PKSEG1(s->sbm_base +
            R_MAC_DMA_REGISTER(txrx, chan, R_MAC_DMA_CONFIG1));
        d->sbdma_dscrbase = PKSEG1(s->sbm_base +
            R_MAC_DMA_REGISTER(txrx, chan, R_MAC_DMA_DSCR_BASE));
        d->sbdma_dscrcnt = PKSEG1(s->sbm_base +
            R_MAC_DMA_REGISTER(txrx, chan, R_MAC_DMA_DSCR_CNT));
        d->sbdma_curdscr = PKSEG1(s->sbm_base +
            R_MAC_DMA_REGISTER(txrx, chan, R_MAC_DMA_CUR_DSCRADDR));

        /*
         * Allocate memory for the ring
         */

        d->sbdma_maxdescr = maxdescr;
        d->sbdma_dscr_mask = d->sbdma_maxdescr - 1;

        d->sbdma_dscrtable = (sbdmadscr_t *)
            KMALLOC(d->sbdma_maxdescr * sizeof(sbdmadscr_t));

        memset(d->sbdma_dscrtable, 0, d->sbdma_maxdescr*sizeof(sbdmadscr_t));

        d->sbdma_dscrtable_phys = KVTOPHYS(d->sbdma_dscrtable);

        /*
         * And context table
         */

        d->sbdma_ctxtable = (struct mbuf **)
            KMALLOC(d->sbdma_maxdescr*sizeof(struct mbuf *));

        memset(d->sbdma_ctxtable, 0, d->sbdma_maxdescr*sizeof(struct mbuf *));
}

/*
 *  SBDMA_CHANNEL_START(d)
 *
 *  Initialize the hardware registers for a DMA channel.
 *
 *  Input parameters:
 *      d - DMA channel to init (context must be previously init'd
 *
 *  Return value:
 *      nothing
 */

static void
sbdma_channel_start(sbmacdma_t *d)
{
        /*
         * Turn on the DMA channel
         */

        SBMAC_WRITECSR(d->sbdma_config1, 0);

        SBMAC_WRITECSR(d->sbdma_dscrbase, d->sbdma_dscrtable_phys);

        SBMAC_WRITECSR(d->sbdma_config0, V_DMA_RINGSZ(d->sbdma_maxdescr) | 0);

        /*
         * Initialize ring pointers
         */

        d->sbdma_add_index = 0;
        d->sbdma_rem_index = 0;
}

/*
 *  SBDMA_ADD_RCVBUFFER(d, m)
 *
 *  Add a buffer to the specified DMA channel.   For receive channels,
 *  this queues a buffer for inbound packets.
 *
 *  Input parameters:
 *      d - DMA channel descriptor
 *      m - mbuf to add, or NULL if we should allocate one.
 *
 *  Return value:
 *      0 if buffer could not be added (ring is full)
 *      1 if buffer added successfully
 */

static int
sbdma_add_rcvbuffer(sbmacdma_t *d, struct mbuf *m)
{
        unsigned int dsc, nextdsc;
        struct mbuf *m_new = NULL;

        /* get pointer to our current place in the ring */

        dsc = d->sbdma_add_index;
        nextdsc = SBDMA_NEXTBUF(d, d->sbdma_add_index);

        /*
         * figure out if the ring is full - if the next descriptor
         * is the same as the one that we're going to remove from
         * the ring, the ring is full
         */

        if (nextdsc == d->sbdma_rem_index)
                return ENOSPC;

        /*
         * Allocate an mbuf if we don't already have one.
         * If we do have an mbuf, reset it so that it's empty.
         */

        if (m == NULL) {
                MGETHDR(m_new, M_DONTWAIT, MT_DATA);
                if (m_new == NULL) {
                        printf("%s: mbuf allocation failed\n",
                            d->sbdma_eth->sc_dev.dv_xname);
                        return ENOBUFS;
                }

                MCLGET(m_new, M_DONTWAIT);
                if (!(m_new->m_flags & M_EXT)) {
                        printf("%s: mbuf cluster allocation failed\n",
                            d->sbdma_eth->sc_dev.dv_xname);
                        m_freem(m_new);
                        return ENOBUFS;
                }

                m_new->m_len = m_new->m_pkthdr.len= MCLBYTES;
                m_adj(m_new, ETHER_ALIGN);
        } else {
                m_new = m;
                m_new->m_len = m_new->m_pkthdr.len = MCLBYTES;
                m_new->m_data = m_new->m_ext.ext_buf;
                m_adj(m_new, ETHER_ALIGN);
        }

        /*
         * fill in the descriptor
         */

        d->sbdma_dscrtable[dsc].dscr_a = KVTOPHYS(mtod(m_new, void *)) |
            V_DMA_DSCRA_A_SIZE(NUMCACHEBLKS(ETHER_ALIGN + m_new->m_len)) |
            M_DMA_DSCRA_INTERRUPT;

        /* receiving: no options */
        d->sbdma_dscrtable[dsc].dscr_b = 0;

        /*
         * fill in the context
         */

        d->sbdma_ctxtable[dsc] = m_new;

        /*
         * point at next packet
         */

        d->sbdma_add_index = nextdsc;

        /*
         * Give the buffer to the DMA engine.
         */

        SBMAC_WRITECSR(d->sbdma_dscrcnt, 1);

        return 0;                                       /* we did it */
}

/*
 *  SBDMA_ADD_TXBUFFER(d, m)
 *
 *  Add a transmit buffer to the specified DMA channel, causing a
 *  transmit to start.
 *
 *  Input parameters:
 *      d - DMA channel descriptor
 *      m - mbuf to add
 *
 *  Return value:
 *      0 transmit queued successfully
 *      otherwise error code
 */

static int
sbdma_add_txbuffer(sbmacdma_t *d, struct mbuf *m)
{
        unsigned int dsc, nextdsc, prevdsc, origdesc;
        int length;
        int num_mbufs = 0;
        struct sbmac_softc *sc = d->sbdma_eth;

        /* get pointer to our current place in the ring */

        dsc = d->sbdma_add_index;
        nextdsc = SBDMA_NEXTBUF(d, d->sbdma_add_index);

        /*
         * figure out if the ring is full - if the next descriptor
         * is the same as the one that we're going to remove from
         * the ring, the ring is full
         */

        if (nextdsc == d->sbdma_rem_index) {
                SBMAC_EVCNT_INCR(sc->sbm_ev_txstall);
                return ENOSPC;
        }

        /*
         * PASS3 parts do not have buffer alignment restriction.
         * No need to copy/coalesce to new mbuf.  Also has different
         * descriptor format
         */
        if (sc->sbm_pass3_dma) {
                struct mbuf *m_temp = NULL;

                /*
                 * Loop thru this mbuf record.
                 * The head mbuf will have SOP set.
                 */
                d->sbdma_dscrtable[dsc].dscr_a = KVTOPHYS(mtod(m,void *)) |
                    M_DMA_ETHTX_SOP;

                /*
                 * transmitting: set outbound options,buffer A size(+ low 5
                 * bits of start addr),and packet length.
                 */
                d->sbdma_dscrtable[dsc].dscr_b =
                    V_DMA_DSCRB_OPTIONS(K_DMA_ETHTX_APPENDCRC_APPENDPAD) |
                    V_DMA_DSCRB_A_SIZE((m->m_len +
                      (mtod(m,uintptr_t) & 0x0000001F))) |
                    V_DMA_DSCRB_PKT_SIZE_MSB((m->m_pkthdr.len & 0xc000) >> 14) |
                    V_DMA_DSCRB_PKT_SIZE(m->m_pkthdr.len & 0x3fff);

                d->sbdma_add_index = nextdsc;
                origdesc = prevdsc = dsc;
                dsc = d->sbdma_add_index;
                num_mbufs++;

                /* Start with first non-head mbuf */
                for(m_temp = m->m_next; m_temp != 0; m_temp = m_temp->m_next) {
                        int len, next_len;
                        uint64_t addr;

                        if (m_temp->m_len == 0)
                                continue;       /* Skip 0-length mbufs */

                        len = m_temp->m_len;
                        addr = KVTOPHYS(mtod(m_temp, void *));

                        /*
                         * Check to see if the mbuf spans a page boundary.  If
                         * it does, and the physical pages behind the virtual
                         * pages are not contiguous, split it so that each
                         * virtual page uses it's own Tx descriptor.
                         */
                        if (trunc_page(addr) != trunc_page(addr + len - 1)) {
                                next_len = (addr + len) - trunc_page(addr + len);

                                len -= next_len;

                                if (addr + len ==
                                    KVTOPHYS(mtod(m_temp, char *) + len)) {
                                        SBMAC_EVCNT_INCR(sc->sbm_ev_txkeep);
                                        len += next_len;
                                        next_len = 0;
                                } else {
                                        SBMAC_EVCNT_INCR(sc->sbm_ev_txsplit);
                                }
                        } else {
                                next_len = 0;
                        }

again:
                        /*
                         * fill in the descriptor
                         */
                        d->sbdma_dscrtable[dsc].dscr_a = addr;

                        /*
                         * transmitting: set outbound options,buffer A
                         * size(+ low 5 bits of start addr)
                         */
                        d->sbdma_dscrtable[dsc].dscr_b = V_DMA_DSCRB_OPTIONS(K_DMA_ETHTX_NOTSOP) |
                            V_DMA_DSCRB_A_SIZE((len + (addr & 0x0000001F)));

                        d->sbdma_ctxtable[dsc] = NULL;

                        /*
                         * point at next descriptor
                         */
                        nextdsc = SBDMA_NEXTBUF(d, d->sbdma_add_index);
                        if (nextdsc == d->sbdma_rem_index) {
                                d->sbdma_add_index = origdesc;
                                SBMAC_EVCNT_INCR(sc->sbm_ev_txstall);
                                return ENOSPC;
                        }
                        d->sbdma_add_index = nextdsc;

                        prevdsc = dsc;
                        dsc = d->sbdma_add_index;
                        num_mbufs++;

                        if (next_len != 0) {
                                addr = KVTOPHYS(mtod(m_temp, char *) + len);
                                len = next_len;

                                next_len = 0;
                                goto again;
                        }

                }
                /* Set head mbuf to last context index */
                d->sbdma_ctxtable[prevdsc] = m;

                /* Interrupt on last dscr of packet.  */
                d->sbdma_dscrtable[prevdsc].dscr_a |= M_DMA_DSCRA_INTERRUPT;
        } else {
                struct mbuf *m_new = NULL;
                /*
                 * [BEGIN XXX]
                 * XXX Copy/coalesce the mbufs into a single mbuf cluster (we
                 * assume it will fit).  This is a temporary hack to get us
                 * going.
                 */

                MGETHDR(m_new,M_DONTWAIT,MT_DATA);
                if (m_new == NULL) {
                        printf("%s: mbuf allocation failed\n",
                            d->sbdma_eth->sc_dev.dv_xname);
                        SBMAC_EVCNT_INCR(sc->sbm_ev_txdrop);
                        return ENOBUFS;
                }

                MCLGET(m_new,M_DONTWAIT);
                if (!(m_new->m_flags & M_EXT)) {
                        printf("%s: mbuf cluster allocation failed\n",
                            d->sbdma_eth->sc_dev.dv_xname);
                        m_freem(m_new);
                        SBMAC_EVCNT_INCR(sc->sbm_ev_txdrop);
                        return ENOBUFS;
                }

                m_new->m_len = m_new->m_pkthdr.len= MCLBYTES;
                /*m_adj(m_new,ETHER_ALIGN);*/

                /*
                 * XXX Don't forget to include the offset portion in the
                 * XXX cache block calculation when this code is rewritten!
                 */

                /*
                 * Copy data
                 */

                m_copydata(m,0,m->m_pkthdr.len,mtod(m_new,void *));
                m_new->m_len = m_new->m_pkthdr.len = m->m_pkthdr.len;

                /* Free old mbuf 'm', actual mbuf is now 'm_new' */

                // XXX: CALLERS WILL FREE, they might have to bpf_mtap() if this
                // XXX: function succeeds.
                // m_freem(m);
                length = m_new->m_len;

                /* [END XXX] */
                /*
                 * fill in the descriptor
                 */

                d->sbdma_dscrtable[dsc].dscr_a = KVTOPHYS(mtod(m_new,void *)) |
                    V_DMA_DSCRA_A_SIZE(NUMCACHEBLKS(m_new->m_len)) |
                    M_DMA_DSCRA_INTERRUPT |
                    M_DMA_ETHTX_SOP;

                /* transmitting: set outbound options and length */
                d->sbdma_dscrtable[dsc].dscr_b =
                    V_DMA_DSCRB_OPTIONS(K_DMA_ETHTX_APPENDCRC_APPENDPAD) |
                    V_DMA_DSCRB_PKT_SIZE(length);

                num_mbufs++;

                /*
                 * fill in the context
                 */

                d->sbdma_ctxtable[dsc] = m_new;

                /*
                 * point at next packet
                 */
                d->sbdma_add_index = nextdsc;
        }

        /*
         * Give the buffer to the DMA engine.
         */

        SBMAC_WRITECSR(d->sbdma_dscrcnt, num_mbufs);

        return 0;                                       /* we did it */
}

/*
 *  SBDMA_EMPTYRING(d)
 *
 *  Free all allocated mbufs on the specified DMA channel;
 *
 *  Input parameters:
 *      d  - DMA channel
 *
 *  Return value:
 *      nothing
 */

static void
sbdma_emptyring(sbmacdma_t *d)
{
        int idx;
        struct mbuf *m;

        for (idx = 0; idx < d->sbdma_maxdescr; idx++) {
                m = d->sbdma_ctxtable[idx];
                if (m) {
                        m_freem(m);
                        d->sbdma_ctxtable[idx] = NULL;
                }
        }
}

/*
 *  SBDMA_FILLRING(d)
 *
 *  Fill the specified DMA channel (must be receive channel)
 *  with mbufs
 *
 *  Input parameters:
 *      d - DMA channel
 *
 *  Return value:
 *      nothing
 */

static void
sbdma_fillring(sbmacdma_t *d)
{
        int idx;

        for (idx = 0; idx < SBMAC_MAX_RXDESCR-1; idx++)
                if (sbdma_add_rcvbuffer(d, NULL) != 0)
                        break;
}

/*
 *  SBDMA_RX_PROCESS(sc, d)
 *
 *  Process "completed" receive buffers on the specified DMA channel.
 *  Note that this isn't really ideal for priority channels, since
 *  it processes all of the packets on a given channel before
 *  returning.
 *
 *  Input parameters:
 *      sc - softc structure
 *      d - DMA channel context
 *
 *  Return value:
 *      nothing
 */

static void
sbdma_rx_process(struct sbmac_softc *sc, sbmacdma_t *d)
{
        int curidx;
        int hwidx;
        sbdmadscr_t *dscp;
        struct mbuf *m;
        int len;

        struct ifnet *ifp = &(sc->sc_ethercom.ec_if);

        for (;;) {
                /*
                 * figure out where we are (as an index) and where
                 * the hardware is (also as an index)
                 *
                 * This could be done faster if (for example) the
                 * descriptor table was page-aligned and contiguous in
                 * both virtual and physical memory -- you could then
                 * just compare the low-order bits of the virtual address
                 * (sbdma_rem_index) and the physical address
                 * (sbdma_curdscr CSR).
                 */

                curidx = d->sbdma_rem_index;
                hwidx = (int)
                    (((SBMAC_READCSR(d->sbdma_curdscr) & M_DMA_CURDSCR_ADDR) -
                    d->sbdma_dscrtable_phys) / sizeof(sbdmadscr_t));

                /*
                 * If they're the same, that means we've processed all
                 * of the descriptors up to (but not including) the one that
                 * the hardware is working on right now.
                 */

                if (curidx == hwidx)
                        break;

                /*
                 * Otherwise, get the packet's mbuf ptr back
                 */

                dscp = &(d->sbdma_dscrtable[curidx]);
                m = d->sbdma_ctxtable[curidx];
                d->sbdma_ctxtable[curidx] = NULL;

                len = (int)G_DMA_DSCRB_PKT_SIZE(dscp->dscr_b) - 4;

                /*
                 * Check packet status.  If good, process it.
                 * If not, silently drop it and put it back on the
                 * receive ring.
                 */

                if (! (dscp->dscr_a & M_DMA_ETHRX_BAD)) {

                        /*
                         * Set length into the packet
                         * XXX do we remove the CRC here?
                         */
                        m->m_pkthdr.len = m->m_len = len;

                        ifp->if_ipackets++;
                        m->m_pkthdr.rcvif = ifp;


                        /*
                         * Add a new buffer to replace the old one.
                         */
                        sbdma_add_rcvbuffer(d, NULL);

#if (NBPFILTER > 0)
                        /*
                         * Handle BPF listeners. Let the BPF user see the
                         * packet, but don't pass it up to the ether_input()
                         * layer unless it's a broadcast packet, multicast
                         * packet, matches our ethernet address or the
                         * interface is in promiscuous mode.
                         */

                        if (ifp->if_bpf)
                                bpf_mtap(ifp->if_bpf, m);
#endif
                        /*
                         * Pass the buffer to the kernel
                         */
                        (*ifp->if_input)(ifp, m);
                } else {
                        /*
                         * Packet was mangled somehow.  Just drop it and
                         * put it back on the receive ring.
                         */
                        sbdma_add_rcvbuffer(d, m);
                }

                /*
                 * .. and advance to the next buffer.
                 */

                d->sbdma_rem_index = SBDMA_NEXTBUF(d, d->sbdma_rem_index);
        }
}

/*
 *  SBDMA_TX_PROCESS(sc, d)
 *
 *  Process "completed" transmit buffers on the specified DMA channel.
 *  This is normally called within the interrupt service routine.
 *  Note that this isn't really ideal for priority channels, since
 *  it processes all of the packets on a given channel before
 *  returning.
 *
 *  Input parameters:
 *      sc - softc structure
 *      d - DMA channel context
 *
 *  Return value:
 *      nothing
 */

static void
sbdma_tx_process(struct sbmac_softc *sc, sbmacdma_t *d)
{
        int curidx;
        int hwidx;
        struct mbuf *m;

        struct ifnet *ifp = &(sc->sc_ethercom.ec_if);

        for (;;) {
                /*
                 * figure out where we are (as an index) and where
                 * the hardware is (also as an index)
                 *
                 * This could be done faster if (for example) the
                 * descriptor table was page-aligned and contiguous in
                 * both virtual and physical memory -- you could then
                 * just compare the low-order bits of the virtual address
                 * (sbdma_rem_index) and the physical address
                 * (sbdma_curdscr CSR).
                 */

                curidx = d->sbdma_rem_index;
                hwidx = (int)
                    (((SBMAC_READCSR(d->sbdma_curdscr) & M_DMA_CURDSCR_ADDR) -
                    d->sbdma_dscrtable_phys) / sizeof(sbdmadscr_t));

                /*
                 * If they're the same, that means we've processed all
                 * of the descriptors up to (but not including) the one that
                 * the hardware is working on right now.
                 */

                if (curidx == hwidx)
                        break;

                /*
                 * Otherwise, get the packet's mbuf ptr back
                 */

                m = d->sbdma_ctxtable[curidx];
                d->sbdma_ctxtable[curidx] = NULL;

                /*
                 * for transmits we just free buffers and count packets.
                 */
                ifp->if_opackets++;
                m_freem(m);

                /*
                 * .. and advance to the next buffer.
                 */

                d->sbdma_rem_index = SBDMA_NEXTBUF(d, d->sbdma_rem_index);
        }

        /*
         * Decide what to set the IFF_OACTIVE bit in the interface to.
         * It's supposed to reflect if the interface is actively
         * transmitting, but that's really hard to do quickly.
         */

        ifp->if_flags &= ~IFF_OACTIVE;
}

/*
 *  SBMAC_INITCTX(s)
 *
 *  Initialize an Ethernet context structure - this is called
 *  once per MAC on the 1250.  Memory is allocated here, so don't
 *  call it again from inside the ioctl routines that bring the
 *  interface up/down
 *
 *  Input parameters:
 *      s - sbmac context structure
 *
 *  Return value:
 *      0
 */

static void
sbmac_initctx(struct sbmac_softc *s)
{
        uint64_t sysrev;

        /*
         * figure out the addresses of some ports
         */

        s->sbm_macenable = PKSEG1(s->sbm_base + R_MAC_ENABLE);
        s->sbm_maccfg    = PKSEG1(s->sbm_base + R_MAC_CFG);
        s->sbm_fifocfg   = PKSEG1(s->sbm_base + R_MAC_THRSH_CFG);
        s->sbm_framecfg  = PKSEG1(s->sbm_base + R_MAC_FRAMECFG);
        s->sbm_rxfilter  = PKSEG1(s->sbm_base + R_MAC_ADFILTER_CFG);
        s->sbm_isr       = PKSEG1(s->sbm_base + R_MAC_STATUS);
        s->sbm_imr       = PKSEG1(s->sbm_base + R_MAC_INT_MASK);

        /*
         * Initialize the DMA channels.  Right now, only one per MAC is used
         * Note: Only do this _once_, as it allocates memory from the kernel!
         */

        sbdma_initctx(&(s->sbm_txdma), s, 0, DMA_TX, SBMAC_MAX_TXDESCR);
        sbdma_initctx(&(s->sbm_rxdma), s, 0, DMA_RX, SBMAC_MAX_RXDESCR);

        /*
         * initial state is OFF
         */

        s->sbm_state = sbmac_state_off;

        /*
         * Initial speed is (XXX TEMP) 10MBit/s HDX no FC
         */

        s->sbm_speed = sbmac_speed_10;
        s->sbm_duplex = sbmac_duplex_half;
        s->sbm_fc = sbmac_fc_disabled;

        /* 
         * Determine SOC type.  112x has Pass3 SOC features.
         */
        sysrev = SBMAC_READCSR( PKSEG1(A_SCD_SYSTEM_REVISION) );
        s->sbm_pass3_dma = (SYS_SOC_TYPE(sysrev) == K_SYS_SOC_TYPE_BCM1120 ||
                            SYS_SOC_TYPE(sysrev) == K_SYS_SOC_TYPE_BCM1125 ||
                            SYS_SOC_TYPE(sysrev) == K_SYS_SOC_TYPE_BCM1125H ||
                            (SYS_SOC_TYPE(sysrev) == K_SYS_SOC_TYPE_BCM1250 &&
                             G_SYS_REVISION(sysrev) >= K_SYS_REVISION_BCM1250_PASS3));
#ifdef SBMAC_EVENT_COUNTERS
        evcnt_attach_dynamic(&s->sbm_ev_rxintr, EVCNT_TYPE_INTR,
            NULL, s->sc_dev.dv_xname, "rxintr");
        evcnt_attach_dynamic(&s->sbm_ev_txintr, EVCNT_TYPE_INTR,
            NULL, s->sc_dev.dv_xname, "txintr");
        evcnt_attach_dynamic(&s->sbm_ev_txdrop, EVCNT_TYPE_MISC,
            NULL, s->sc_dev.dv_xname, "txdrop");
        evcnt_attach_dynamic(&s->sbm_ev_txstall, EVCNT_TYPE_MISC,
            NULL, s->sc_dev.dv_xname, "txstall");
        if (s->sbm_pass3_dma) {
                evcnt_attach_dynamic(&s->sbm_ev_txsplit, EVCNT_TYPE_MISC,
                    NULL, s->sc_dev.dv_xname, "pass3tx-split");
                evcnt_attach_dynamic(&s->sbm_ev_txkeep, EVCNT_TYPE_MISC,
                    NULL, s->sc_dev.dv_xname, "pass3tx-keep");
        }
#endif
}

/*
 *  SBMAC_CHANNEL_START(s)
 *
 *  Start packet processing on this MAC.
 *
 *  Input parameters:
 *      s - sbmac structure
 *
 *  Return value:
 *      nothing
 */

static void
sbmac_channel_start(struct sbmac_softc *s)
{
        uint64_t reg;
        sbmac_port_t port;
        uint64_t cfg, fifo, framecfg;
        int idx;
        uint64_t dma_cfg0, fifo_cfg;
        sbmacdma_t *txdma;

        /*
         * Don't do this if running
         */

        if (s->sbm_state == sbmac_state_on)
                return;

        /*
         * Bring the controller out of reset, but leave it off.
         */

        SBMAC_WRITECSR(s->sbm_macenable, 0);

        /*
         * Ignore all received packets
         */

        SBMAC_WRITECSR(s->sbm_rxfilter, 0);

        /*
         * Calculate values for various control registers.
         */

        cfg = M_MAC_RETRY_EN |
              M_MAC_TX_HOLD_SOP_EN |
              V_MAC_TX_PAUSE_CNT_16K |
              M_MAC_AP_STAT_EN |
              M_MAC_SS_EN |
              0;

        fifo = V_MAC_TX_WR_THRSH(4) |   /* Must be '4' or '8' */
               V_MAC_TX_RD_THRSH(4) |
               V_MAC_TX_RL_THRSH(4) |
               V_MAC_RX_PL_THRSH(4) |
               V_MAC_RX_RD_THRSH(4) |   /* Must be '4' */
               V_MAC_RX_PL_THRSH(4) |
               V_MAC_RX_RL_THRSH(8) |
               0;

        framecfg = V_MAC_MIN_FRAMESZ_DEFAULT |
            V_MAC_MAX_FRAMESZ_DEFAULT |
            V_MAC_BACKOFF_SEL(1);

        /*
         * Clear out the hash address map
         */

        port = PKSEG1(s->sbm_base + R_MAC_HASH_BASE);
        for (idx = 0; idx < MAC_HASH_COUNT; idx++) {
                SBMAC_WRITECSR(port, 0);
                port += sizeof(uint64_t);
        }

        /*
         * Clear out the exact-match table
         */

        port = PKSEG1(s->sbm_base + R_MAC_ADDR_BASE);
        for (idx = 0; idx < MAC_ADDR_COUNT; idx++) {
                SBMAC_WRITECSR(port, 0);
                port += sizeof(uint64_t);
        }

        /*
         * Clear out the DMA Channel mapping table registers
         */

        port = PKSEG1(s->sbm_base + R_MAC_CHUP0_BASE);
        for (idx = 0; idx < MAC_CHMAP_COUNT; idx++) {
                SBMAC_WRITECSR(port, 0);
                port += sizeof(uint64_t);
        }

        port = PKSEG1(s->sbm_base + R_MAC_CHLO0_BASE);
        for (idx = 0; idx < MAC_CHMAP_COUNT; idx++) {
                SBMAC_WRITECSR(port, 0);
                port += sizeof(uint64_t);
        }

        /*
         * Program the hardware address.  It goes into the hardware-address
         * register as well as the first filter register.
         */

        reg = sbmac_addr2reg(s->sbm_hwaddr);

        port = PKSEG1(s->sbm_base + R_MAC_ADDR_BASE);
        SBMAC_WRITECSR(port, reg);
        port = PKSEG1(s->sbm_base + R_MAC_ETHERNET_ADDR);
        SBMAC_WRITECSR(port, 0);                        // pass1 workaround

        /*
         * Set the receive filter for no packets, and write values
         * to the various config registers
         */

        SBMAC_WRITECSR(s->sbm_rxfilter, 0);
        SBMAC_WRITECSR(s->sbm_imr, 0);
        SBMAC_WRITECSR(s->sbm_framecfg, framecfg);
        SBMAC_WRITECSR(s->sbm_fifocfg, fifo);
        SBMAC_WRITECSR(s->sbm_maccfg, cfg);

        /*
         * Initialize DMA channels (rings should be ok now)
         */

        sbdma_channel_start(&(s->sbm_rxdma));
        sbdma_channel_start(&(s->sbm_txdma));

        /*
         * Configure the speed, duplex, and flow control
         */

        sbmac_set_speed(s, s->sbm_speed);
        sbmac_set_duplex(s, s->sbm_duplex, s->sbm_fc);

        /*
         * Fill the receive ring
         */

        sbdma_fillring(&(s->sbm_rxdma));

        /*
         * Turn on the rest of the bits in the enable register
         */

        SBMAC_WRITECSR(s->sbm_macenable, M_MAC_RXDMA_EN0 | M_MAC_TXDMA_EN0 |
            M_MAC_RX_ENABLE | M_MAC_TX_ENABLE);


        /*
         * Accept any kind of interrupt on TX and RX DMA channel 0
         */
        SBMAC_WRITECSR(s->sbm_imr,
            (M_MAC_INT_CHANNEL << S_MAC_TX_CH0) |
            (M_MAC_INT_CHANNEL << S_MAC_RX_CH0));

        /*
         * Enable receiving unicasts and broadcasts
         */

        SBMAC_WRITECSR(s->sbm_rxfilter, M_MAC_UCAST_EN | M_MAC_BCAST_EN);

        /*
         * On chips which support unaligned DMA features, set the descriptor
         * ring for transmit channels to use the unaligned buffer format.
         */
        txdma = &(s->sbm_txdma); 

        if (s->sbm_pass3_dma) {
                dma_cfg0 = SBMAC_READCSR(txdma->sbdma_config0);
                dma_cfg0 |= V_DMA_DESC_TYPE(K_DMA_DESC_TYPE_RING_UAL_RMW) |
                    M_DMA_TBX_EN | M_DMA_TDX_EN;
                SBMAC_WRITECSR(txdma->sbdma_config0,dma_cfg0);

                fifo_cfg =  SBMAC_READCSR(s->sbm_fifocfg);
                fifo_cfg |= V_MAC_TX_WR_THRSH(8) |
                    V_MAC_TX_RD_THRSH(8) | V_MAC_TX_RL_THRSH(8);
                SBMAC_WRITECSR(s->sbm_fifocfg,fifo_cfg);
        }

        /*
         * we're running now.
         */

        s->sbm_state = sbmac_state_on;
        s->sc_ethercom.ec_if.if_flags |= IFF_RUNNING;

        /*
         * Program multicast addresses
         */

        sbmac_setmulti(s);

        /*
         * If channel was in promiscuous mode before, turn that on
         */

        if (s->sc_ethercom.ec_if.if_flags & IFF_PROMISC)
                sbmac_promiscuous_mode(s, 1);

        /*
         * Turn on the once-per-second timer
         */

        callout_reset(&(s->sc_tick_ch), hz, sbmac_tick, s);
}

/*
 *  SBMAC_CHANNEL_STOP(s)
 *
 *  Stop packet processing on this MAC.
 *
 *  Input parameters:
 *      s - sbmac structure
 *
 *  Return value:
 *      nothing
 */

static void
sbmac_channel_stop(struct sbmac_softc *s)
{
        uint64_t ctl;

        /* don't do this if already stopped */

        if (s->sbm_state == sbmac_state_off)
                return;

        /* don't accept any packets, disable all interrupts */

        SBMAC_WRITECSR(s->sbm_rxfilter, 0);
        SBMAC_WRITECSR(s->sbm_imr, 0);

        /* Turn off ticker */

        callout_stop(&(s->sc_tick_ch));

        /* turn off receiver and transmitter */

        ctl = SBMAC_READCSR(s->sbm_macenable);
        ctl &= ~(M_MAC_RXDMA_EN0 | M_MAC_TXDMA_EN0);
        SBMAC_WRITECSR(s->sbm_macenable, ctl);

        /* We're stopped now. */

        s->sbm_state = sbmac_state_off;
        s->sc_ethercom.ec_if.if_flags &= ~IFF_RUNNING;

        /* Empty the receive and transmit rings */

        sbdma_emptyring(&(s->sbm_rxdma));
        sbdma_emptyring(&(s->sbm_txdma));
}

/*
 *  SBMAC_SET_CHANNEL_STATE(state)
 *
 *  Set the channel's state ON or OFF
 *
 *  Input parameters:
 *      state - new state
 *
 *  Return value:
 *      old state
 */

static sbmac_state_t
sbmac_set_channel_state(struct sbmac_softc *sc, sbmac_state_t state)
{
        sbmac_state_t oldstate = sc->sbm_state;

        /*
         * If same as previous state, return
         */

        if (state == oldstate)
                return oldstate;

        /*
         * If new state is ON, turn channel on
         */

        if (state == sbmac_state_on)
                sbmac_channel_start(sc);
        else
                sbmac_channel_stop(sc);

        /*
         * Return previous state
         */

        return oldstate;
}

/*
 *  SBMAC_PROMISCUOUS_MODE(sc, onoff)
 *
 *  Turn on or off promiscuous mode
 *
 *  Input parameters:
 *      sc - softc
 *      onoff - 1 to turn on, 0 to turn off
 *
 *  Return value:
 *      nothing
 */

static void
sbmac_promiscuous_mode(struct sbmac_softc *sc, int onoff)
{
        uint64_t reg;

        if (sc->sbm_state != sbmac_state_on)
                return;

        if (onoff) {
                reg = SBMAC_READCSR(sc->sbm_rxfilter);
                reg |= M_MAC_ALLPKT_EN;
                SBMAC_WRITECSR(sc->sbm_rxfilter, reg);
        } else {
                reg = SBMAC_READCSR(sc->sbm_rxfilter);
                reg &= ~M_MAC_ALLPKT_EN;
                SBMAC_WRITECSR(sc->sbm_rxfilter, reg);
        }
}

/*
 *  SBMAC_INIT_AND_START(sc)
 *
 *  Stop the channel and restart it.  This is generally used
 *  when we have to do something to the channel that requires
 *  a swift kick.
 *
 *  Input parameters:
 *      sc - softc
 */

static void
sbmac_init_and_start(struct sbmac_softc *sc)
{
        int s;

        s = splnet();

        mii_pollstat(&sc->sc_mii);              /* poll phy for current speed */
        sbmac_mii_statchg((struct device *) sc); /* set state to new speed */
        sbmac_set_channel_state(sc, sbmac_state_on);

        splx(s);
}

/*
 *  SBMAC_ADDR2REG(ptr)
 *
 *  Convert six bytes into the 64-bit register value that
 *  we typically write into the SBMAC's address/mcast registers
 *
 *  Input parameters:
 *      ptr - pointer to 6 bytes
 *
 *  Return value:
 *      register value
 */

static uint64_t
sbmac_addr2reg(u_char *ptr)
{
        uint64_t reg = 0;

        ptr += 6;

        reg |= (uint64_t) *(--ptr);
        reg <<= 8;
        reg |= (uint64_t) *(--ptr);
        reg <<= 8;
        reg |= (uint64_t) *(--ptr);
        reg <<= 8;
        reg |= (uint64_t) *(--ptr);
        reg <<= 8;
        reg |= (uint64_t) *(--ptr);
        reg <<= 8;
        reg |= (uint64_t) *(--ptr);

        return reg;
}

/*
 *  SBMAC_SET_SPEED(s, speed)
 *
 *  Configure LAN speed for the specified MAC.
 *  Warning: must be called when MAC is off!
 *
 *  Input parameters:
 *      s - sbmac structure
 *      speed - speed to set MAC to (see sbmac_speed_t enum)
 *
 *  Return value:
 *      1 if successful
 *      0 indicates invalid parameters
 */

static int
sbmac_set_speed(struct sbmac_softc *s, sbmac_speed_t speed)
{
        uint64_t cfg;
        uint64_t framecfg;

        /*
         * Save new current values
         */

        s->sbm_speed = speed;

        if (s->sbm_state != sbmac_state_off)
                panic("sbmac_set_speed while MAC not off");

        /*
         * Read current register values
         */

        cfg = SBMAC_READCSR(s->sbm_maccfg);
        framecfg = SBMAC_READCSR(s->sbm_framecfg);

        /*
         * Mask out the stuff we want to change
         */

        cfg &= ~(M_MAC_BURST_EN | M_MAC_SPEED_SEL);
        framecfg &= ~(M_MAC_IFG_RX | M_MAC_IFG_TX | M_MAC_IFG_THRSH |
            M_MAC_SLOT_SIZE);

        /*
         * Now add in the new bits
         */

        switch (speed) {
        case sbmac_speed_10:
                framecfg |= V_MAC_IFG_RX_10 |
                    V_MAC_IFG_TX_10 |
                    K_MAC_IFG_THRSH_10 |
                    V_MAC_SLOT_SIZE_10;
                cfg |= V_MAC_SPEED_SEL_10MBPS;
                break;

        case sbmac_speed_100:
                framecfg |= V_MAC_IFG_RX_100 |
                    V_MAC_IFG_TX_100 |
                    V_MAC_IFG_THRSH_100 |
                    V_MAC_SLOT_SIZE_100;
                cfg |= V_MAC_SPEED_SEL_100MBPS ;
                break;

        case sbmac_speed_1000:
                framecfg |= V_MAC_IFG_RX_1000 |
                    V_MAC_IFG_TX_1000 |
                    V_MAC_IFG_THRSH_1000 |
                    V_MAC_SLOT_SIZE_1000;
                cfg |= V_MAC_SPEED_SEL_1000MBPS | M_MAC_BURST_EN;
                break;

        case sbmac_speed_auto:          /* XXX not implemented */
                /* fall through */
        default:
                return 0;
        }

        /*
         * Send the bits back to the hardware
         */

        SBMAC_WRITECSR(s->sbm_framecfg, framecfg);
        SBMAC_WRITECSR(s->sbm_maccfg, cfg);

        return 1;
}

/*
 *  SBMAC_SET_DUPLEX(s, duplex, fc)
 *
 *  Set Ethernet duplex and flow control options for this MAC
 *  Warning: must be called when MAC is off!
 *
 *  Input parameters:
 *      s - sbmac structure
 *      duplex - duplex setting (see sbmac_duplex_t)
 *      fc - flow control setting (see sbmac_fc_t)
 *
 *  Return value:
 *      1 if ok
 *      0 if an invalid parameter combination was specified
 */

static int
sbmac_set_duplex(struct sbmac_softc *s, sbmac_duplex_t duplex, sbmac_fc_t fc)
{
        uint64_t cfg;

        /*
         * Save new current values
         */

        s->sbm_duplex = duplex;
        s->sbm_fc = fc;

        if (s->sbm_state != sbmac_state_off)
                panic("sbmac_set_duplex while MAC not off");

        /*
         * Read current register values
         */

        cfg = SBMAC_READCSR(s->sbm_maccfg);

        /*
         * Mask off the stuff we're about to change
         */

        cfg &= ~(M_MAC_FC_SEL | M_MAC_FC_CMD | M_MAC_HDX_EN);

        switch (duplex) {
        case sbmac_duplex_half:
                switch (fc) {
                case sbmac_fc_disabled:
                        cfg |= M_MAC_HDX_EN | V_MAC_FC_CMD_DISABLED;
                        break;

                case sbmac_fc_collision:
                        cfg |= M_MAC_HDX_EN | V_MAC_FC_CMD_ENABLED;
                        break;

                case sbmac_fc_carrier:
                        cfg |= M_MAC_HDX_EN | V_MAC_FC_CMD_ENAB_FALSECARR;
                        break;

                case sbmac_fc_auto:             /* XXX not implemented */
                        /* fall through */
                case sbmac_fc_frame:            /* not valid in half duplex */
                default:                        /* invalid selection */
                        panic("%s: invalid half duplex fc selection %d",
                            s->sc_dev.dv_xname, fc);
                        return 0;
                }
                break;

        case sbmac_duplex_full:
                switch (fc) {
                case sbmac_fc_disabled:
                        cfg |= V_MAC_FC_CMD_DISABLED;
                        break;

                case sbmac_fc_frame:
                        cfg |= V_MAC_FC_CMD_ENABLED;
                        break;

                case sbmac_fc_collision:        /* not valid in full duplex */
                case sbmac_fc_carrier:          /* not valid in full duplex */
                case sbmac_fc_auto:             /* XXX not implemented */
                        /* fall through */
                default:
                        panic("%s: invalid full duplex fc selection %d",
                            s->sc_dev.dv_xname, fc);
                        return 0;
                }
                break;

        default:
                /* fall through */
        case sbmac_duplex_auto:
                panic("%s: bad duplex %d", s->sc_dev.dv_xname, duplex);
                /* XXX not implemented */
                break;
        }

        /*
         * Send the bits back to the hardware
         */

        SBMAC_WRITECSR(s->sbm_maccfg, cfg);

        return 1;
}

/*
 *  SBMAC_INTR()
 *
 *  Interrupt handler for MAC interrupts
 *
 *  Input parameters:
 *      MAC structure
 *
 *  Return value:
 *      nothing
 */

/* ARGSUSED */
static void
sbmac_intr(void *xsc, uint32_t status, vaddr_t pc)
{
        struct sbmac_softc *sc = (struct sbmac_softc *) xsc;
        struct ifnet *ifp = &sc->sc_ethercom.ec_if;
        uint64_t isr;

        for (;;) {

                /*
                 * Read the ISR (this clears the bits in the real register)
                 */

                isr = SBMAC_READCSR(sc->sbm_isr);

                if (isr == 0)
                        break;

                /*
                 * Transmits on channel 0
                 */

                if (isr & (M_MAC_INT_CHANNEL << S_MAC_TX_CH0)) {
                        sbdma_tx_process(sc, &(sc->sbm_txdma));
                        SBMAC_EVCNT_INCR(sc->sbm_ev_txintr);
                }

                /*
                 * Receives on channel 0
                 */

                if (isr & (M_MAC_INT_CHANNEL << S_MAC_RX_CH0)) {
                        sbdma_rx_process(sc, &(sc->sbm_rxdma));
                        SBMAC_EVCNT_INCR(sc->sbm_ev_rxintr);
                }
        }

        /* try to get more packets going */
        sbmac_start(ifp);
}


/*
 *  SBMAC_START(ifp)
 *
 *  Start output on the specified interface.  Basically, we
 *  queue as many buffers as we can until the ring fills up, or
 *  we run off the end of the queue, whichever comes first.
 *
 *  Input parameters:
 *      ifp - interface
 *
 *  Return value:
 *      nothing
 */

static void
sbmac_start(struct ifnet *ifp)
{
        struct sbmac_softc      *sc;
        struct mbuf             *m_head = NULL;
        int                     rv;

        if ((ifp->if_flags & (IFF_RUNNING|IFF_OACTIVE)) != IFF_RUNNING)
                return;

        sc = ifp->if_softc;

        for (;;) {

                IF_DEQUEUE(&ifp->if_snd, m_head);
                if (m_head == NULL)
                    break;

                /*
                 * Put the buffer on the transmit ring.  If we
                 * don't have room, set the OACTIVE flag and wait
                 * for the NIC to drain the ring.
                 */

                rv = sbdma_add_txbuffer(&(sc->sbm_txdma), m_head);

                if (rv == 0) {
                        /*
                         * If there's a BPF listener, bounce a copy of this
                         * frame to it.
                         */
#if (NBPFILTER > 0)
                        if (ifp->if_bpf)
                                bpf_mtap(ifp->if_bpf, m_head);
#endif
                        if (!sc->sbm_pass3_dma) {
                                /*
                                 * Don't free mbuf if we're not copying to new
                                 * mbuf in sbdma_add_txbuffer.  It will be
                                 * freed in sbdma_tx_process.
                                 */
                                m_freem(m_head);
                        }
                } else {
                    IF_PREPEND(&ifp->if_snd, m_head);
                    ifp->if_flags |= IFF_OACTIVE;
                    break;
                }
        }
}

/*
 *  SBMAC_SETMULTI(sc)
 *
 *  Reprogram the multicast table into the hardware, given
 *  the list of multicasts associated with the interface
 *  structure.
 *
 *  Input parameters:
 *      sc - softc
 *
 *  Return value:
 *      nothing
 */

static void
sbmac_setmulti(struct sbmac_softc *sc)
{
        struct ifnet *ifp;
        uint64_t reg;
        sbmac_port_t port;
        int idx;
        struct ether_multi *enm;
        struct ether_multistep step;

        ifp = &sc->sc_ethercom.ec_if;

        /*
         * Clear out entire multicast table.  We do this by nuking
         * the entire hash table and all the direct matches except
         * the first one, which is used for our station address
         */

        for (idx = 1; idx < MAC_ADDR_COUNT; idx++) {
                port = PKSEG1(sc->sbm_base +
                    R_MAC_ADDR_BASE+(idx*sizeof(uint64_t)));
                SBMAC_WRITECSR(port, 0);
        }

        for (idx = 0; idx < MAC_HASH_COUNT; idx++) {
                port = PKSEG1(sc->sbm_base +
                    R_MAC_HASH_BASE+(idx*sizeof(uint64_t)));
                SBMAC_WRITECSR(port, 0);
        }

        /*
         * Clear the filter to say we don't want any multicasts.
         */

        reg = SBMAC_READCSR(sc->sbm_rxfilter);
        reg &= ~(M_MAC_MCAST_INV | M_MAC_MCAST_EN);
        SBMAC_WRITECSR(sc->sbm_rxfilter, reg);

        if (ifp->if_flags & IFF_ALLMULTI) {
                /*
                 * Enable ALL multicasts.  Do this by inverting the
                 * multicast enable bit.
                 */
                reg = SBMAC_READCSR(sc->sbm_rxfilter);
                reg |= (M_MAC_MCAST_INV | M_MAC_MCAST_EN);
                SBMAC_WRITECSR(sc->sbm_rxfilter, reg);
                return;
        }

        /*
         * Progam new multicast entries.  For now, only use the
         * perfect filter.  In the future we'll need to use the
         * hash filter if the perfect filter overflows
         */

        /*
         * XXX only using perfect filter for now, need to use hash
         * XXX if the table overflows
         */

        idx = 1;                /* skip station address */
        ETHER_FIRST_MULTI(step, &sc->sc_ethercom, enm);
        while ((enm != NULL) && (idx < MAC_ADDR_COUNT)) {
                reg = sbmac_addr2reg(enm->enm_addrlo);
                port = PKSEG1(sc->sbm_base +
                    R_MAC_ADDR_BASE+(idx*sizeof(uint64_t)));
                SBMAC_WRITECSR(port, reg);
                idx++;
                ETHER_NEXT_MULTI(step, enm);
        }

        /*
         * Enable the "accept multicast bits" if we programmed at least one
         * multicast.
         */

        if (idx > 1) {
            reg = SBMAC_READCSR(sc->sbm_rxfilter);
            reg |= M_MAC_MCAST_EN;
            SBMAC_WRITECSR(sc->sbm_rxfilter, reg);
        }
}

/*
 *  SBMAC_ETHER_IOCTL(ifp, cmd, data)
 *
 *  Generic IOCTL requests for this interface.  The basic
 *  stuff is handled here for bringing the interface up,
 *  handling multicasts, etc.
 *
 *  Input parameters:
 *      ifp - interface structure
 *      cmd - command code
 *      data - pointer to data
 *
 *  Return value:
 *      return value (0 is success)
 */

static int
sbmac_ether_ioctl(struct ifnet *ifp, u_long cmd, void *data)
{
        struct ifaddr *ifa = (struct ifaddr *) data;
        struct sbmac_softc *sc = ifp->if_softc;

        switch (cmd) {
        case SIOCINITIFADDR:
                ifp->if_flags |= IFF_UP;

                switch (ifa->ifa_addr->sa_family) {
#ifdef INET
                case AF_INET:
                        sbmac_init_and_start(sc);
                        arp_ifinit(ifp, ifa);
                        break;
#endif
#ifdef NS
                case AF_NS:
                {
                        struct ns_addr *ina = &IA_SNS(ifa)->sns_addr;

                        if (ns_nullhost(*ina))
                                ina->x_host =
                                    *(union ns_host *)LLADDR(ifp->if_sadl);
                        else
                                memcpy(LLADDR(ifp->if_sadl), ina->x_host.c_host,
                                    ifp->if_addrlen);
                        /* Set new address. */
                        sbmac_init_and_start(sc);
                        break;
                }
#endif
                default:
                        sbmac_init_and_start(sc);
                        break;
                }
                break;

        default:
                return ENOTTY;
        }

        return (0);
}

/*
 *  SBMAC_IOCTL(ifp, cmd, data)
 *
 *  Main IOCTL handler - dispatches to other IOCTLs for various
 *  types of requests.
 *
 *  Input parameters:
 *      ifp - interface pointer
 *      cmd - command code
 *      data - pointer to argument data
 *
 *  Return value:
 *      0 if ok
 *      else error code
 */

static int
sbmac_ioctl(struct ifnet *ifp, u_long cmd, void *data)
{
        struct sbmac_softc *sc = ifp->if_softc;
        struct ifreq *ifr = (struct ifreq *) data;
        int s, error = 0;

        s = splnet();

        switch (cmd) {
        case SIOCINITIFADDR:
                error = sbmac_ether_ioctl(ifp, cmd, data);
                break;
        case SIOCSIFMTU:
                if (ifr->ifr_mtu < ETHERMIN || ifr->ifr_mtu > ETHERMTU)
                        error = EINVAL;
                else if ((error = ifioctl_common(ifp, cmd, data)) == ENETRESET)
                        /* XXX Program new MTU here */
                        error = 0;
                break;
        case SIOCSIFFLAGS:
                if ((error = ifioctl_common(ifp, cmd, data)) != 0)
                        break;
                if (ifp->if_flags & IFF_UP) {
                        /*
                         * If only the state of the PROMISC flag changed,
                         * just tweak the hardware registers.
                         */
                        if ((ifp->if_flags & IFF_RUNNING) &&
                            (ifp->if_flags & IFF_PROMISC)) {
                                /* turn on promiscuous mode */
                                sbmac_promiscuous_mode(sc, 1);
                        } else if (ifp->if_flags & IFF_RUNNING &&
                            !(ifp->if_flags & IFF_PROMISC)) {
                            /* turn off promiscuous mode */
                            sbmac_promiscuous_mode(sc, 0);
                        } else
                            sbmac_set_channel_state(sc, sbmac_state_on);
                } else {
                        if (ifp->if_flags & IFF_RUNNING)
                                sbmac_set_channel_state(sc, sbmac_state_off);
                }

                sc->sbm_if_flags = ifp->if_flags;
                error = 0;
                break;

        case SIOCADDMULTI:
        case SIOCDELMULTI:
        case SIOCSIFMEDIA:
        case SIOCGIFMEDIA:
                if ((error = ether_ioctl(ifp, cmd, data)) == ENETRESET) {
                        error = 0;
                        if (ifp->if_flags & IFF_RUNNING)
                                sbmac_setmulti(sc);
                }
                break;
        default:
                error = ether_ioctl(ifp, cmd, data);
                break;
        }

        (void)splx(s);

        return(error);
}

/*
 *  SBMAC_IFMEDIA_UPD(ifp)
 *
 *  Configure an appropriate media type for this interface,
 *  given the data in the interface structure
 *
 *  Input parameters:
 *      ifp - interface
 *
 *  Return value:
 *      0 if ok
 *      else error code
 */

/*
 *  SBMAC_IFMEDIA_STS(ifp, ifmr)
 *
 *  Report current media status (used by ifconfig, for example)
 *
 *  Input parameters:
 *      ifp - interface structure
 *      ifmr - media request structure
 *
 *  Return value:
 *      nothing
 */

/*
 *  SBMAC_WATCHDOG(ifp)
 *
 *  Called periodically to make sure we're still happy.
 *
 *  Input parameters:
 *      ifp - interface structure
 *
 *  Return value:
 *      nothing
 */

static void
sbmac_watchdog(struct ifnet *ifp)
{

        /* XXX do something */
}

/*
 * One second timer, used to tick MII.
 */
static void
sbmac_tick(void *arg)
{
        struct sbmac_softc *sc = arg;
        int s;

        s = splnet();
        mii_tick(&sc->sc_mii);
        splx(s);

        callout_reset(&sc->sc_tick_ch, hz, sbmac_tick, sc);
}


/*
 *  SBMAC_MATCH(parent, match, aux)
 *
 *  Part of the config process - see if this device matches the
 *  info about what we expect to find on the bus.
 *
 *  Input parameters:
 *      parent - parent bus structure
 *      match -
 *      aux - bus-specific args
 *
 *  Return value:
 *      1 if we match
 *      0 if we don't match
 */

static int
sbmac_match(struct device *parent, struct cfdata *match, void *aux)
{
        struct sbobio_attach_args *sap = aux;

        /*
         * Make sure it's a MAC
         */

        if (sap->sa_locs.sa_type != SBOBIO_DEVTYPE_MAC)
                return 0;

        /*
         * Yup, it is.
         */

        return 1;
}

/*
 *  SBMAC_PARSE_XDIGIT(str)
 *
 *  Parse a hex digit, returning its value
 *
 *  Input parameters:
 *      str - character
 *
 *  Return value:
 *      hex value, or -1 if invalid
 */

static int
sbmac_parse_xdigit(char str)
{
        int digit;

        if ((str >= '0') && (str <= '9'))
                digit = str - '0';
        else if ((str >= 'a') && (str <= 'f'))
                digit = str - 'a' + 10;
        else if ((str >= 'A') && (str <= 'F'))
                digit = str - 'A' + 10;
        else
                digit = -1;

        return digit;
}

/*
 *  SBMAC_PARSE_HWADDR(str, hwaddr)
 *
 *  Convert a string in the form xx:xx:xx:xx:xx:xx into a 6-byte
 *  Ethernet address.
 *
 *  Input parameters:
 *      str - string
 *      hwaddr - pointer to hardware address
 *
 *  Return value:
 *      0 if ok, else -1
 */

static int
sbmac_parse_hwaddr(const char *str, u_char *hwaddr)
{
        int digit1, digit2;
        int idx = 6;

        while (*str && (idx > 0)) {
                digit1 = sbmac_parse_xdigit(*str);
                if (digit1 < 0)
                        return -1;
                str++;
                if (!*str)
                        return -1;

                if ((*str == ':') || (*str == '-')) {
                        digit2 = digit1;
                        digit1 = 0;
                } else {
                        digit2 = sbmac_parse_xdigit(*str);
                        if (digit2 < 0)
                                return -1;
                        str++;
                }

                *hwaddr++ = (digit1 << 4) | digit2;
                idx--;

                if (*str == '-')
                        str++;
                if (*str == ':')
                        str++;
        }
        return 0;
}

/*
 *  SBMAC_ATTACH(parent, self, aux)
 *
 *  Attach routine - init hardware and hook ourselves into NetBSD.
 *
 *  Input parameters:
 *      parent - parent bus device
 *      self - our softc
 *      aux - attach data
 *
 *  Return value:
 *      nothing
 */

static void
sbmac_attach(struct device *parent, struct device *self, void *aux)
{
        struct ifnet *ifp;
        struct sbmac_softc *sc;
        struct sbobio_attach_args *sap = aux;
        u_char *eaddr;
        static int unit = 0;    /* XXX */
        uint64_t ea_reg;
        int idx;

        sc = (struct sbmac_softc *)self;

        /* Determine controller base address */

        sc->sbm_base = sap->sa_locs.sa_addr;

        eaddr = sc->sbm_hwaddr;

        /*
         * Initialize context (get pointers to registers and stuff), then
         * allocate the memory for the descriptor tables.
         */

        sbmac_initctx(sc);

        callout_init(&(sc->sc_tick_ch), 0);

        /*
         * Read the ethernet address.  The firwmare left this programmed
         * for us in the ethernet address register for each mac.
         */

        ea_reg = SBMAC_READCSR(PKSEG1(sc->sbm_base + R_MAC_ETHERNET_ADDR));
        for (idx = 0; idx < 6; idx++) {
                eaddr[idx] = (uint8_t) (ea_reg & 0xFF);
                ea_reg >>= 8;
        }

#define SBMAC_DEFAULT_HWADDR "40:00:00:00:01:00"
        if (eaddr[0] == 0 && eaddr[1] == 0 && eaddr[2] == 0 &&
                eaddr[3] == 0 && eaddr[4] == 0 && eaddr[5] == 0) {
                sbmac_parse_hwaddr(SBMAC_DEFAULT_HWADDR, eaddr);
                eaddr[5] = unit;
        }

#ifdef SBMAC_ETH0_HWADDR
        if (unit == 0)
                sbmac_parse_hwaddr(SBMAC_ETH0_HWADDR, eaddr);
#endif
#ifdef SBMAC_ETH1_HWADDR
        if (unit == 1)
                sbmac_parse_hwaddr(SBMAC_ETH1_HWADDR, eaddr);
#endif
#ifdef SBMAC_ETH2_HWADDR
        if (unit == 2)
                sbmac_parse_hwaddr(SBMAC_ETH2_HWADDR, eaddr);
#endif
        unit++;

        /*
         * Display Ethernet address (this is called during the config process
         * so we need to finish off the config message that was being displayed)
         */
        printf(": Ethernet%s\n",
            sc->sbm_pass3_dma ? ", using unaligned tx DMA" : "");
        printf("%s: Ethernet address: %s\n", self->dv_xname,
            ether_sprintf(eaddr));


        /*
         * Set up ifnet structure
         */

        ifp = &sc->sc_ethercom.ec_if;
        ifp->if_softc = sc;
        memcpy(ifp->if_xname, sc->sc_dev.dv_xname, IFNAMSIZ);
        ifp->if_flags = IFF_BROADCAST | IFF_SIMPLEX | IFF_MULTICAST |
            IFF_NOTRAILERS;
        ifp->if_ioctl = sbmac_ioctl;
        ifp->if_start = sbmac_start;
        ifp->if_watchdog = sbmac_watchdog;
        ifp->if_snd.ifq_maxlen = SBMAC_MAX_TXDESCR - 1;

        /*
         * Set up ifmedia support.
         */

        /*
         * Initialize MII/media info.
         */
        sc->sc_mii.mii_ifp      = ifp;
        sc->sc_mii.mii_readreg  = sbmac_mii_readreg;
        sc->sc_mii.mii_writereg = sbmac_mii_writereg;
        sc->sc_mii.mii_statchg  = sbmac_mii_statchg;
        sc->sc_ethercom.ec_mii = &sc->sc_mii;
        ifmedia_init(&sc->sc_mii.mii_media, 0, ether_mediachange,
            ether_mediastatus);
        mii_attach(&sc->sc_dev, &sc->sc_mii, 0xffffffff, MII_PHY_ANY,
            MII_OFFSET_ANY, 0);

        if (LIST_FIRST(&sc->sc_mii.mii_phys) == NULL) {
                ifmedia_add(&sc->sc_mii.mii_media, IFM_ETHER|IFM_NONE, 0, NULL);
                ifmedia_set(&sc->sc_mii.mii_media, IFM_ETHER|IFM_NONE);
        } else {
                ifmedia_set(&sc->sc_mii.mii_media, IFM_ETHER|IFM_AUTO);
        }


        /*
         * map/route interrupt
         */

        sc->sbm_intrhand = cpu_intr_establish(sap->sa_locs.sa_intr[0], IPL_NET,
            sbmac_intr, sc);

        /*
         * Call MI attach routines.
         */
        if_attach(ifp);
        ether_ifattach(ifp, eaddr);
}