Sync usage with man page.

[netbsd-mini2440.git] / sys / dev / ic / adwlib.c

/* $NetBSD: adwlib.c,v 1.38 2007/10/19 11:59:45 ad Exp $        */

/*
 * Low level routines for the Advanced Systems Inc. SCSI controllers chips
 *
 * Copyright (c) 1998, 1999, 2000 The NetBSD Foundation, Inc.
 * All rights reserved.
 *
 * Author: Baldassare Dante Profeta <dante@mclink.it>
 *
 * Redistribution and use in source and binary forms, with or without
 * modification, are permitted provided that the following conditions
 * are met:
 * 1. Redistributions of source code must retain the above copyright
 *    notice, this list of conditions and the following disclaimer.
 * 2. Redistributions in binary form must reproduce the above copyright
 *    notice, this list of conditions and the following disclaimer in the
 *    documentation and/or other materials provided with the distribution.
 * 3. All advertising materials mentioning features or use of this software
 *    must display the following acknowledgement:
 *        This product includes software developed by the NetBSD
 *        Foundation, Inc. and its contributors.
 * 4. Neither the name of The NetBSD Foundation nor the names of its
 *    contributors may be used to endorse or promote products derived
 *    from this software without specific prior written permission.
 *
 * THIS SOFTWARE IS PROVIDED BY THE NETBSD FOUNDATION, INC. AND CONTRIBUTORS
 * ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED
 * TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
 * PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS
 * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
 * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
 * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
 * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
 * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
 * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
 * POSSIBILITY OF SUCH DAMAGE.
 */
/*
 * Ported from:
 */
/*
 * advansys.c - Linux Host Driver for AdvanSys SCSI Adapters
 *
 * Copyright (c) 1995-2000 Advanced System Products, Inc.
 * All Rights Reserved.
 *
 * Redistribution and use in source and binary forms, with or without
 * modification, are permitted provided that redistributions of source
 * code retain the above copyright notice and this comment without
 * modification.
 */

#include <sys/cdefs.h>
__KERNEL_RCSID(0, "$NetBSD: adwlib.c,v 1.38 2007/10/19 11:59:45 ad Exp $");

#include <sys/param.h>
#include <sys/systm.h>
#include <sys/malloc.h>
#include <sys/kernel.h>
#include <sys/queue.h>
#include <sys/device.h>

#include <sys/bus.h>
#include <sys/intr.h>

#include <dev/scsipi/scsi_all.h>
#include <dev/scsipi/scsipi_all.h>
#include <dev/scsipi/scsiconf.h>

#include <dev/pci/pcidevs.h>

#include <uvm/uvm_extern.h>

#include <dev/ic/adwlib.h>
#include <dev/ic/adwmcode.h>
#include <dev/ic/adw.h>


/* Static Functions */

int AdwRamSelfTest(bus_space_tag_t, bus_space_handle_t, u_int8_t);
int AdwLoadMCode(bus_space_tag_t, bus_space_handle_t, u_int16_t *, u_int8_t);
int AdwASC3550Cabling(bus_space_tag_t, bus_space_handle_t, ADW_DVC_CFG *);
int AdwASC38C0800Cabling(bus_space_tag_t, bus_space_handle_t, ADW_DVC_CFG *);
int AdwASC38C1600Cabling(bus_space_tag_t, bus_space_handle_t, ADW_DVC_CFG *);

static u_int16_t AdwGetEEPROMConfig(bus_space_tag_t, bus_space_handle_t,
                                                        ADW_EEPROM *);
static void AdwSetEEPROMConfig(bus_space_tag_t, bus_space_handle_t,
                                                         ADW_EEPROM *);
static u_int16_t AdwReadEEPWord(bus_space_tag_t, bus_space_handle_t, int);
static void AdwWaitEEPCmd(bus_space_tag_t, bus_space_handle_t);

static void AdwInquiryHandling(ADW_SOFTC *, ADW_SCSI_REQ_Q *);

static void AdwSleepMilliSecond(u_int32_t);
static void AdwDelayMicroSecond(u_int32_t);


/*
 * EEPROM Configuration.
 *
 * All drivers should use this structure to set the default EEPROM
 * configuration. The BIOS now uses this structure when it is built.
 * Additional structure information can be found in adwlib.h where
 * the structure is defined.
 */
static const ADW_EEPROM adw_3550_Default_EEPROM = {
        ADW_EEPROM_BIOS_ENABLE, /* 00 cfg_lsw */
        0x0000,                 /* 01 cfg_msw */
        0xFFFF,                 /* 02 disc_enable */
        0xFFFF,                 /* 03 wdtr_able */
        { 0xFFFF },             /* 04 sdtr_able */
        0xFFFF,                 /* 05 start_motor */
        0xFFFF,                 /* 06 tagqng_able */
        0xFFFF,                 /* 07 bios_scan */
        0,                      /* 08 scam_tolerant */
        7,                      /* 09 adapter_scsi_id */
        0,                      /*    bios_boot_delay */
        3,                      /* 10 scsi_reset_delay */
        0,                      /*    bios_id_lun */
        0,                      /* 11 termination */
        0,                      /*    reserved1 */
        0xFFE7,                 /* 12 bios_ctrl */
        { 0xFFFF },             /* 13 ultra_able */
        { 0 },                  /* 14 reserved2 */
        ADW_DEF_MAX_HOST_QNG,   /* 15 max_host_qng */
        ADW_DEF_MAX_DVC_QNG,    /*    max_dvc_qng */
        0,                      /* 16 dvc_cntl */
        { 0 },                  /* 17 bug_fix */
        { 0,0,0 },              /* 18-20 serial_number[3] */
        0,                      /* 21 check_sum */
        {                       /* 22-29 oem_name[16] */
          0,0,0,0,0,0,0,0,
          0,0,0,0,0,0,0,0
        },
        0,                      /* 30 dvc_err_code */
        0,                      /* 31 adv_err_code */
        0,                      /* 32 adv_err_addr */
        0,                      /* 33 saved_dvc_err_code */
        0,                      /* 34 saved_adv_err_code */
        0,                      /* 35 saved_adv_err_addr */
        {                       /* 36-55 reserved1[16] */
          0,0,0,0,0,0,0,0,0,0,
          0,0,0,0,0,0,0,0,0,0
        },
        0,                      /* 56 cisptr_lsw */
        0,                      /* 57 cisprt_msw */
        0,                      /* 58 subsysvid */
        0,                      /* 59 subsysid */
        { 0,0,0,0 }             /* 60-63 reserved2[4] */
};

static const ADW_EEPROM adw_38C0800_Default_EEPROM = {
        ADW_EEPROM_BIOS_ENABLE, /* 00 cfg_lsw */
        0x0000,                 /* 01 cfg_msw */
        0xFFFF,                 /* 02 disc_enable */
        0xFFFF,                 /* 03 wdtr_able */
        { 0x4444 },             /* 04 sdtr_speed1 */
        0xFFFF,                 /* 05 start_motor */
        0xFFFF,                 /* 06 tagqng_able */
        0xFFFF,                 /* 07 bios_scan */
        0,                      /* 08 scam_tolerant */
        7,                      /* 09 adapter_scsi_id */
        0,                      /*    bios_boot_delay */
        3,                      /* 10 scsi_reset_delay */
        0,                      /*    bios_id_lun */
        0,                      /* 11 termination_se */
        0,                      /*    termination_lvd */
        0xFFE7,                 /* 12 bios_ctrl */
        { 0x4444 },             /* 13 sdtr_speed2 */
        { 0x4444 },             /* 14 sdtr_speed3 */
        ADW_DEF_MAX_HOST_QNG,   /* 15 max_host_qng */
        ADW_DEF_MAX_DVC_QNG,    /*    max_dvc_qng */
        0,                      /* 16 dvc_cntl */
        { 0x4444 },             /* 17 sdtr_speed4 */
        { 0,0,0 },              /* 18-20 serial_number[3] */
        0,                      /* 21 check_sum */
        {                       /* 22-29 oem_name[16] */
          0,0,0,0,0,0,0,0,
          0,0,0,0,0,0,0,0
        },
        0,                      /* 30 dvc_err_code */
        0,                      /* 31 adv_err_code */
        0,                      /* 32 adv_err_addr */
        0,                      /* 33 saved_dvc_err_code */
        0,                      /* 34 saved_adv_err_code */
        0,                      /* 35 saved_adv_err_addr */
        {                       /* 36-55 reserved1[16] */
          0,0,0,0,0,0,0,0,0,0,
          0,0,0,0,0,0,0,0,0,0
        },
        0,                      /* 56 cisptr_lsw */
        0,                      /* 57 cisprt_msw */
        PCI_VENDOR_ADVSYS,      /* 58 subsysvid */
        PCI_PRODUCT_ADVSYS_U2W, /* 59 subsysid */
        { 0,0,0,0 }             /* 60-63 reserved2[4] */
};

static const ADW_EEPROM adw_38C1600_Default_EEPROM = {
        ADW_EEPROM_BIOS_ENABLE, /* 00 cfg_lsw */
        0x0000,                 /* 01 cfg_msw */
        0xFFFF,                 /* 02 disc_enable */
        0xFFFF,                 /* 03 wdtr_able */
        { 0x5555 },             /* 04 sdtr_speed1 */
        0xFFFF,                 /* 05 start_motor */
        0xFFFF,                 /* 06 tagqng_able */
        0xFFFF,                 /* 07 bios_scan */
        0,                      /* 08 scam_tolerant */
        7,                      /* 09 adapter_scsi_id */
        0,                      /*    bios_boot_delay */
        3,                      /* 10 scsi_reset_delay */
        0,                      /*    bios_id_lun */
        0,                      /* 11 termination_se */
        0,                      /*    termination_lvd */
        0xFFE7,                 /* 12 bios_ctrl */
        { 0x5555 },             /* 13 sdtr_speed2 */
        { 0x5555 },             /* 14 sdtr_speed3 */
        ADW_DEF_MAX_HOST_QNG,   /* 15 max_host_qng */
        ADW_DEF_MAX_DVC_QNG,    /*    max_dvc_qng */
        0,                      /* 16 dvc_cntl */
        { 0x5555 },             /* 17 sdtr_speed4 */
        { 0,0,0 },              /* 18-20 serial_number[3] */
        0,                      /* 21 check_sum */
        {                       /* 22-29 oem_name[16] */
          0,0,0,0,0,0,0,0,
          0,0,0,0,0,0,0,0
        },
        0,                      /* 30 dvc_err_code */
        0,                      /* 31 adv_err_code */
        0,                      /* 32 adv_err_addr */
        0,                      /* 33 saved_dvc_err_code */
        0,                      /* 34 saved_adv_err_code */
        0,                      /* 35 saved_adv_err_addr */
        {                       /* 36-55 reserved1[16] */
          0,0,0,0,0,0,0,0,0,0,
          0,0,0,0,0,0,0,0,0,0
        },
        0,                      /* 56 cisptr_lsw */
        0,                      /* 57 cisprt_msw */
        PCI_VENDOR_ADVSYS,      /* 58 subsysvid */
        PCI_PRODUCT_ADVSYS_U3W, /* 59 subsysid */
        { 0,0,0,0 }             /* 60-63 reserved2[4] */
};


/*
 * Read the board's EEPROM configuration. Set fields in ADW_SOFTC and
 * ADW_DVC_CFG based on the EEPROM settings. The chip is stopped while
 * all of this is done.
 *
 * For a non-fatal error return a warning code. If there are no warnings
 * then 0 is returned.
 *
 * Note: Chip is stopped on entry.
 */
int
AdwInitFromEEPROM(ADW_SOFTC *sc)
{
        bus_space_tag_t iot = sc->sc_iot;
        bus_space_handle_t ioh = sc->sc_ioh;
        ADW_EEPROM              eep_config;
        u_int16_t               warn_code;
        u_int16_t               sdtr_speed = 0;
        u_int8_t                tid, termination;
        int                     i, j;


        warn_code = 0;

        /*
         * Read the board's EEPROM configuration.
         *
         * Set default values if a bad checksum is found.
         *
         * XXX - Don't handle big-endian access to EEPROM yet.
         */
        if (AdwGetEEPROMConfig(iot, ioh, &eep_config) != eep_config.check_sum) {
                warn_code |= ADW_WARN_EEPROM_CHKSUM;

                /*
                 * Set EEPROM default values.
                 */
                switch(sc->chip_type) {
                case ADW_CHIP_ASC3550:
                        eep_config = adw_3550_Default_EEPROM;
                        break;
                case ADW_CHIP_ASC38C0800:
                        eep_config = adw_38C0800_Default_EEPROM;
                        break;
                case ADW_CHIP_ASC38C1600:
                        eep_config = adw_38C1600_Default_EEPROM;

#if 0
XXX       TODO!!!       if (ASC_PCI_ID2FUNC(sc->cfg.pci_slot_info) != 0) {
#endif
                        if (sc->cfg.pci_slot_info != 0) {
                                u_int8_t lsw_msb;

                                lsw_msb = eep_config.cfg_lsw >> 8;
                                /*
                                 * Set Function 1 EEPROM Word 0 MSB
                                 *
                                 * Clear the BIOS_ENABLE (bit 14) and
                                 * INTAB (bit 11) EEPROM bits.
                                 *
                                 * Disable Bit 14 (BIOS_ENABLE) to fix
                                 * SPARC Ultra 60 and old Mac system booting
                                 * problem. The Expansion ROM must
                                 * be disabled in Function 1 for these systems.
                                 */
                                lsw_msb &= ~(((ADW_EEPROM_BIOS_ENABLE |
                                                ADW_EEPROM_INTAB) >> 8) & 0xFF);
                                /*
                                 * Set the INTAB (bit 11) if the GPIO 0 input
                                 * indicates the Function 1 interrupt line is
                                 * wired to INTA.
                                 *
                                 * Set/Clear Bit 11 (INTAB) from
                                 * the GPIO bit 0 input:
                                 *   1 - Function 1 intr line wired to INT A.
                                 *   0 - Function 1 intr line wired to INT B.
                                 *
                                 * Note: Adapter boards always have Function 0
                                 * wired to INTA.
                                 * Put all 5 GPIO bits in input mode and then
                                 * read their input values.
                                 */
                                ADW_WRITE_BYTE_REGISTER(iot, ioh,
                                                        IOPB_GPIO_CNTL, 0);
                                if (ADW_READ_BYTE_REGISTER(iot, ioh,
                                                IOPB_GPIO_DATA) & 0x01) {
                                        /*
                                         * Function 1 interrupt wired to INTA;
                                         * Set EEPROM bit.
                                         */
                                        lsw_msb |= (ADW_EEPROM_INTAB >> 8)
                                                         & 0xFF;
                                 }
                                 eep_config.cfg_lsw &= 0x00FF;
                                 eep_config.cfg_lsw |= lsw_msb << 8;
                        }
                        break;
                }

                /*
                 * Assume the 6 byte board serial number that was read
                 * from EEPROM is correct even if the EEPROM checksum
                 * failed.
                 */
                for (i=2, j=1; i>=0; i--, j++) {
                eep_config.serial_number[i] =
                        AdwReadEEPWord(iot, ioh, ASC_EEP_DVC_CFG_END - j);
                }

                AdwSetEEPROMConfig(iot, ioh, &eep_config);
        }
        /*
         * Set sc and sc->cfg variables from the EEPROM configuration
         * that was read.
         *
         * This is the mapping of EEPROM fields to Adw Library fields.
         */
        sc->wdtr_able = eep_config.wdtr_able;
        if (sc->chip_type == ADW_CHIP_ASC3550) {
                sc->sdtr_able = eep_config.sdtr1.sdtr_able;
                sc->ultra_able = eep_config.sdtr2.ultra_able;
        } else {
                sc->sdtr_speed1 = eep_config.sdtr1.sdtr_speed1;
                sc->sdtr_speed2 = eep_config.sdtr2.sdtr_speed2;
                sc->sdtr_speed3 = eep_config.sdtr3.sdtr_speed3;
                sc->sdtr_speed4 = eep_config.sdtr4.sdtr_speed4;
        }
        sc->ppr_able = 0;
        sc->tagqng_able = eep_config.tagqng_able;
        sc->cfg.disc_enable = eep_config.disc_enable;
        sc->max_host_qng = eep_config.max_host_qng;
        sc->max_dvc_qng = eep_config.max_dvc_qng;
        sc->chip_scsi_id = (eep_config.adapter_scsi_id & ADW_MAX_TID);
        sc->start_motor = eep_config.start_motor;
        sc->scsi_reset_wait = eep_config.scsi_reset_delay;
        sc->bios_ctrl = eep_config.bios_ctrl;
        sc->no_scam = eep_config.scam_tolerant;
        sc->cfg.serial1 = eep_config.serial_number[0];
        sc->cfg.serial2 = eep_config.serial_number[1];
        sc->cfg.serial3 = eep_config.serial_number[2];

        if (sc->chip_type == ADW_CHIP_ASC38C0800 ||
            sc->chip_type == ADW_CHIP_ASC38C1600) {
                sc->sdtr_able = 0;
                for (tid = 0; tid <= ADW_MAX_TID; tid++) {
                        if (tid == 0) {
                                sdtr_speed = sc->sdtr_speed1;
                        } else if (tid == 4) {
                                sdtr_speed = sc->sdtr_speed2;
                        } else if (tid == 8) {
                                sdtr_speed = sc->sdtr_speed3;
                        } else if (tid == 12) {
                                sdtr_speed = sc->sdtr_speed4;
                        }
                        if (sdtr_speed & ADW_MAX_TID) {
                                sc->sdtr_able |= (1 << tid);
                        }
                        sdtr_speed >>= 4;
                }
        }

        /*
         * Set the host maximum queuing (max. 253, min. 16) and the per device
         * maximum queuing (max. 63, min. 4).
         */
        if (eep_config.max_host_qng > ADW_DEF_MAX_HOST_QNG) {
                eep_config.max_host_qng = ADW_DEF_MAX_HOST_QNG;
        } else if (eep_config.max_host_qng < ADW_DEF_MIN_HOST_QNG)
        {
                /* If the value is zero, assume it is uninitialized. */
                if (eep_config.max_host_qng == 0) {
                        eep_config.max_host_qng = ADW_DEF_MAX_HOST_QNG;
                } else {
                        eep_config.max_host_qng = ADW_DEF_MIN_HOST_QNG;
                }
        }

        if (eep_config.max_dvc_qng > ADW_DEF_MAX_DVC_QNG) {
                eep_config.max_dvc_qng = ADW_DEF_MAX_DVC_QNG;
        } else if (eep_config.max_dvc_qng < ADW_DEF_MIN_DVC_QNG) {
                /* If the value is zero, assume it is uninitialized. */
                if (eep_config.max_dvc_qng == 0) {
                        eep_config.max_dvc_qng = ADW_DEF_MAX_DVC_QNG;
                } else {
                        eep_config.max_dvc_qng = ADW_DEF_MIN_DVC_QNG;
                }
        }

        /*
         * If 'max_dvc_qng' is greater than 'max_host_qng', then
         * set 'max_dvc_qng' to 'max_host_qng'.
         */
        if (eep_config.max_dvc_qng > eep_config.max_host_qng) {
                eep_config.max_dvc_qng = eep_config.max_host_qng;
        }

        /*
         * Set ADV_DVC_VAR 'max_host_qng' and ADV_DVC_VAR 'max_dvc_qng'
         * values based on possibly adjusted EEPROM values.
         */
        sc->max_host_qng = eep_config.max_host_qng;
        sc->max_dvc_qng = eep_config.max_dvc_qng;


        /*
         * If the EEPROM 'termination' field is set to automatic (0), then set
         * the ADV_DVC_CFG 'termination' field to automatic also.
         *
         * If the termination is specified with a non-zero 'termination'
         * value check that a legal value is set and set the ADV_DVC_CFG
         * 'termination' field appropriately.
         */

        switch(sc->chip_type) {
        case ADW_CHIP_ASC3550:
                sc->cfg.termination = 0;        /* auto termination */
                switch(eep_config.termination_se) {
                case 3:
                        /* Enable manual control with low on / high on. */
                        sc->cfg.termination |= ADW_TERM_CTL_L;
                case 2:
                        /* Enable manual control with low off / high on. */
                        sc->cfg.termination |= ADW_TERM_CTL_H;
                case 1:
                        /* Enable manual control with low off / high off. */
                        sc->cfg.termination |= ADW_TERM_CTL_SEL;
                case 0:
                        break;
                default:
                        warn_code |= ADW_WARN_EEPROM_TERMINATION;
                }
                break;

        case ADW_CHIP_ASC38C0800:
        case ADW_CHIP_ASC38C1600:
                switch(eep_config.termination_se) {
                case 0:
                        /* auto termination for SE */
                        termination = 0;
                        break;
                case 1:
                        /* Enable manual control with low off / high off. */
                        termination = 0;
                        break;
                case 2:
                        /* Enable manual control with low off / high on. */
                        termination = ADW_TERM_SE_HI;
                        break;
                case 3:
                        /* Enable manual control with low on / high on. */
                        termination = ADW_TERM_SE;
                        break;
                default:
                        /*
                         * The EEPROM 'termination_se' field contains a
                         * bad value. Use automatic termination instead.
                         */
                        termination = 0;
                        warn_code |= ADW_WARN_EEPROM_TERMINATION;
                }

                switch(eep_config.termination_lvd) {
                case 0:
                        /* auto termination for LVD */
                        sc->cfg.termination = termination;
                        break;
                case 1:
                        /* Enable manual control with low off / high off. */
                        sc->cfg.termination = termination;
                        break;
                case 2:
                        /* Enable manual control with low off / high on. */
                        sc->cfg.termination = termination | ADW_TERM_LVD_HI;
                        break;
                case 3:
                        /* Enable manual control with low on / high on. */
                        sc->cfg.termination = termination | ADW_TERM_LVD;
                        break;
                default:
                        /*
                         * The EEPROM 'termination_lvd' field contains a
                         * bad value. Use automatic termination instead.
                         */
                        sc->cfg.termination = termination;
                        warn_code |= ADW_WARN_EEPROM_TERMINATION;
                }
                break;
        }

        return warn_code;
}


/*
 * Initialize the ASC-3550/ASC-38C0800/ASC-38C1600.
 *
 * On failure return the error code.
 */
int
AdwInitDriver(ADW_SOFTC *sc)
{
        bus_space_tag_t iot = sc->sc_iot;
        bus_space_handle_t ioh = sc->sc_ioh;
        u_int16_t       error_code;
        int             word;
        int             i;
        u_int16_t       bios_mem[ADW_MC_BIOSLEN/2];     /* BIOS RISC Memory
                                                                0x40-0x8F. */
        u_int16_t       wdtr_able = 0, sdtr_able, ppr_able, tagqng_able;
        u_int8_t        max_cmd[ADW_MAX_TID + 1];
        u_int8_t        tid;


        error_code = 0;

        /*
         * Save the RISC memory BIOS region before writing the microcode.
         * The BIOS may already be loaded and using its RISC LRAM region
         * so its region must be saved and restored.
         *
         * Note: This code makes the assumption, which is currently true,
         * that a chip reset does not clear RISC LRAM.
         */
        for (i = 0; i < ADW_MC_BIOSLEN/2; i++) {
                ADW_READ_WORD_LRAM(iot, ioh, ADW_MC_BIOSMEM+(2*i), bios_mem[i]);
        }

        /*
         * Save current per TID negotiated values.
         */
        switch (sc->chip_type) {
        case ADW_CHIP_ASC3550:
                if (bios_mem[(ADW_MC_BIOS_SIGNATURE-ADW_MC_BIOSMEM)/2]==0x55AA){

                        u_int16_t  bios_version, major, minor;

                        bios_version = bios_mem[(ADW_MC_BIOS_VERSION -
                                        ADW_MC_BIOSMEM) / 2];
                        major = (bios_version  >> 12) & 0xF;
                        minor = (bios_version  >> 8) & 0xF;
                        if (major < 3 || (major == 3 && minor == 1)) {
                            /*
                             * BIOS 3.1 and earlier location of
                             * 'wdtr_able' variable.
                             */
                            ADW_READ_WORD_LRAM(iot, ioh, 0x120, wdtr_able);
                        } else {
                            ADW_READ_WORD_LRAM(iot, ioh, ADW_MC_WDTR_ABLE,
                                            wdtr_able);
                        }
                }
                break;

        case ADW_CHIP_ASC38C1600:
                ADW_READ_WORD_LRAM(iot, ioh, ADW_MC_PPR_ABLE, ppr_able);
                /* FALLTHROUGH */
        case ADW_CHIP_ASC38C0800:
                ADW_READ_WORD_LRAM(iot, ioh, ADW_MC_WDTR_ABLE, wdtr_able);
                break;
        }
        ADW_READ_WORD_LRAM(iot, ioh, ADW_MC_SDTR_ABLE, sdtr_able);
        ADW_READ_WORD_LRAM(iot, ioh, ADW_MC_TAGQNG_ABLE, tagqng_able);
        for (tid = 0; tid <= ADW_MAX_TID; tid++) {
                ADW_READ_BYTE_LRAM(iot, ioh, ADW_MC_NUMBER_OF_MAX_CMD + tid,
                        max_cmd[tid]);
        }

        /*
         * Perform a RAM Built-In Self Test
         */
        if((error_code = AdwRamSelfTest(iot, ioh, sc->chip_type))) {
                return error_code;
        }

        /*
         * Load the Microcode
         */
        ;
        if((error_code = AdwLoadMCode(iot, ioh, bios_mem, sc->chip_type))) {
                return error_code;
        }

        /*
         * Read microcode version and date.
         */
        ADW_READ_WORD_LRAM(iot, ioh, ADW_MC_VERSION_DATE, sc->cfg.mcode_date);
        ADW_READ_WORD_LRAM(iot, ioh, ADW_MC_VERSION_NUM, sc->cfg.mcode_version);

        /*
         * If the PCI Configuration Command Register "Parity Error Response
         * Control" Bit was clear (0), then set the microcode variable
         * 'control_flag' CONTROL_FLAG_IGNORE_PERR flag to tell the microcode
         * to ignore DMA parity errors.
         */
        if (sc->cfg.control_flag & CONTROL_FLAG_IGNORE_PERR) {
                ADW_READ_WORD_LRAM(iot, ioh, ADW_MC_CONTROL_FLAG, word);
                ADW_WRITE_WORD_LRAM(iot, ioh, ADW_MC_CONTROL_FLAG,
                                        word | CONTROL_FLAG_IGNORE_PERR);
        }

        switch (sc->chip_type) {
        case ADW_CHIP_ASC3550:
                /*
                 * For ASC-3550, setting the START_CTL_EMFU [3:2] bits sets a
                 * FIFO threshold of 128 bytes.
                 * This register is only accessible to the host.
                 */
                ADW_WRITE_BYTE_REGISTER(iot, ioh, IOPB_DMA_CFG0,
                                START_CTL_EMFU | READ_CMD_MRM);
                break;

        case ADW_CHIP_ASC38C0800:
                /*
                 * Write 1 to bit 14 'DIS_TERM_DRV' in the SCSI_CFG1 register.
                 * When DIS_TERM_DRV set to 1, C_DET[3:0] will reflect current
                 * cable detection and then we are able to read C_DET[3:0].
                 *
                 * Note: We will reset DIS_TERM_DRV to 0 in the 'Set SCSI_CFG1
                 * Microcode Default Value' section below.
                 */
                ADW_WRITE_WORD_REGISTER(iot, ioh, IOPW_SCSI_CFG1,
                                ADW_READ_WORD_REGISTER(iot, ioh, IOPW_SCSI_CFG1)
                                | ADW_DIS_TERM_DRV);

                /*
                 * For ASC-38C0800, set FIFO_THRESH_80B [6:4] bits and
                 * START_CTL_TH [3:2] bits for the default FIFO threshold.
                 *
                 * Note: ASC-38C0800 FIFO threshold has been changed to
                 * 256 bytes.
                 *
                 * For DMA Errata #4 set the BC_THRESH_ENB bit.
                 */
                ADW_WRITE_BYTE_REGISTER(iot, ioh, IOPB_DMA_CFG0,
                                                BC_THRESH_ENB | FIFO_THRESH_80B
                                                | START_CTL_TH | READ_CMD_MRM);
                break;

        case ADW_CHIP_ASC38C1600:
                /*
                 * Write 1 to bit 14 'DIS_TERM_DRV' in the SCSI_CFG1 register.
                 * When DIS_TERM_DRV set to 1, C_DET[3:0] will reflect current
                 * cable detection and then we are able to read C_DET[3:0].
                 *
                 * Note: We will reset DIS_TERM_DRV to 0 in the 'Set SCSI_CFG1
                 * Microcode Default Value' section below.
                 */
                ADW_WRITE_WORD_REGISTER(iot, ioh, IOPW_SCSI_CFG1,
                                ADW_READ_WORD_REGISTER(iot, ioh, IOPW_SCSI_CFG1)
                                | ADW_DIS_TERM_DRV);

                /*
                 * If the BIOS control flag AIPP (Asynchronous Information
                 * Phase Protection) disable bit is not set, then set the
                 * firmware 'control_flag' CONTROL_FLAG_ENABLE_AIPP bit to
                 * enable AIPP checking and encoding.
                 */
                if ((sc->bios_ctrl & BIOS_CTRL_AIPP_DIS) == 0) {
                        ADW_READ_WORD_LRAM(iot, ioh, ADW_MC_CONTROL_FLAG, word);
                        ADW_WRITE_WORD_LRAM(iot, ioh, ADW_MC_CONTROL_FLAG,
                                        word | CONTROL_FLAG_ENABLE_AIPP);
                }

                /*
                 * For ASC-38C1600 use DMA_CFG0 default values:
                 * FIFO_THRESH_80B [6:4], and START_CTL_TH [3:2].
                 */
                ADW_WRITE_BYTE_REGISTER(iot, ioh, IOPB_DMA_CFG0,
                                FIFO_THRESH_80B | START_CTL_TH | READ_CMD_MRM);
                break;
        }

        /*
         * Microcode operating variables for WDTR, SDTR, and command tag
         * queuing will be set in AdvInquiryHandling() based on what a
         * device reports it is capable of in Inquiry byte 7.
         *
         * If SCSI Bus Resets have been disabled, then directly set
         * SDTR and WDTR from the EEPROM configuration. This will allow
         * the BIOS and warm boot to work without a SCSI bus hang on
         * the Inquiry caused by host and target mismatched DTR values.
         * Without the SCSI Bus Reset, before an Inquiry a device can't
         * be assumed to be in Asynchronous, Narrow mode.
         */
        if ((sc->bios_ctrl & BIOS_CTRL_RESET_SCSI_BUS) == 0) {
                ADW_WRITE_WORD_LRAM(iot, ioh, ADW_MC_WDTR_ABLE, sc->wdtr_able);
                ADW_WRITE_WORD_LRAM(iot, ioh, ADW_MC_SDTR_ABLE, sc->sdtr_able);
        }

        /*
         * Set microcode operating variables for SDTR_SPEED1, SDTR_SPEED2,
         * SDTR_SPEED3, and SDTR_SPEED4 based on the ULTRA EEPROM per TID
         * bitmask. These values determine the maximum SDTR speed negotiated
         * with a device.
         *
         * The SDTR per TID bitmask overrides the SDTR_SPEED1, SDTR_SPEED2,
         * SDTR_SPEED3, and SDTR_SPEED4 values so it is safe to set them
         * without determining here whether the device supports SDTR.
         */
        switch (sc->chip_type) {
        case ADW_CHIP_ASC3550:
                word = 0;
                for (tid = 0; tid <= ADW_MAX_TID; tid++) {
                        if (ADW_TID_TO_TIDMASK(tid) & sc->ultra_able) {
                                /* Set Ultra speed for TID 'tid'. */
                                word |= (0x3 << (4 * (tid % 4)));
                        } else {
                                /* Set Fast speed for TID 'tid'. */
                                word |= (0x2 << (4 * (tid % 4)));
                        }
                        /* Check if done with sdtr_speed1. */
                        if (tid == 3) {
                                ADW_WRITE_WORD_LRAM(iot, ioh,
                                                ADW_MC_SDTR_SPEED1, word);
                                word = 0;
                        /* Check if done with sdtr_speed2. */
                        } else if (tid == 7) {
                                ADW_WRITE_WORD_LRAM(iot, ioh,
                                                ADW_MC_SDTR_SPEED2, word);
                                word = 0;
                        /* Check if done with sdtr_speed3. */
                        } else if (tid == 11) {
                                ADW_WRITE_WORD_LRAM(iot, ioh,
                                                ADW_MC_SDTR_SPEED3, word);
                                word = 0;
                        /* Check if done with sdtr_speed4. */
                        } else if (tid == 15) {
                                ADW_WRITE_WORD_LRAM(iot, ioh,
                                                ADW_MC_SDTR_SPEED4, word);
                                /* End of loop. */
                        }
                }

                /*
                 * Set microcode operating variable for the
                 * disconnect per TID bitmask.
                 */
                ADW_WRITE_WORD_LRAM(iot, ioh, ADW_MC_DISC_ENABLE,
                                                        sc->cfg.disc_enable);
                break;

        case ADW_CHIP_ASC38C0800:
                /* FALLTHROUGH */
        case ADW_CHIP_ASC38C1600:
                ADW_WRITE_WORD_LRAM(iot, ioh, ADW_MC_DISC_ENABLE,
                                                        sc->cfg.disc_enable);
                ADW_WRITE_WORD_LRAM(iot, ioh, ADW_MC_SDTR_SPEED1,
                                                        sc->sdtr_speed1);
                ADW_WRITE_WORD_LRAM(iot, ioh, ADW_MC_SDTR_SPEED2,
                                                        sc->sdtr_speed2);
                ADW_WRITE_WORD_LRAM(iot, ioh, ADW_MC_SDTR_SPEED3,
                                                        sc->sdtr_speed3);
                ADW_WRITE_WORD_LRAM(iot, ioh, ADW_MC_SDTR_SPEED4,
                                                        sc->sdtr_speed4);
                break;
        }


        /*
         * Set SCSI_CFG0 Microcode Default Value.
         *
         * The microcode will set the SCSI_CFG0 register using this value
         * after it is started below.
         */
        ADW_WRITE_WORD_LRAM(iot, ioh, ADW_MC_DEFAULT_SCSI_CFG0,
                ADW_PARITY_EN | ADW_QUEUE_128 | ADW_SEL_TMO_LONG |
                ADW_OUR_ID_EN | sc->chip_scsi_id);


        switch(sc->chip_type) {
        case ADW_CHIP_ASC3550:
                error_code = AdwASC3550Cabling(iot, ioh, &sc->cfg);
                break;

        case ADW_CHIP_ASC38C0800:
                error_code = AdwASC38C0800Cabling(iot, ioh, &sc->cfg);
                break;

        case ADW_CHIP_ASC38C1600:
                error_code = AdwASC38C1600Cabling(iot, ioh, &sc->cfg);
                break;
        }
        if(error_code) {
                return error_code;
        }

        /*
         * Set SEL_MASK Microcode Default Value
         *
         * The microcode will set the SEL_MASK register using this value
         * after it is started below.
         */
        ADW_WRITE_WORD_LRAM(iot, ioh, ADW_MC_DEFAULT_SEL_MASK,
                ADW_TID_TO_TIDMASK(sc->chip_scsi_id));

        /*
         * Create and Initialize Host->RISC Carrier lists
         */
        sc->carr_freelist = AdwInitCarriers(sc->sc_dmamap_carrier,
                                                sc->sc_control->carriers);

        /*
         * Set-up the Host->RISC Initiator Command Queue (ICQ).
         */

        if ((sc->icq_sp = sc->carr_freelist) == NULL) {
                return ADW_IERR_NO_CARRIER;
        }
        sc->carr_freelist = ADW_CARRIER_VADDR(sc,
                        ASC_GET_CARRP(sc->icq_sp->next_ba));

        /*
         * The first command issued will be placed in the stopper carrier.
         */
        sc->icq_sp->next_ba = htole32(ASC_CQ_STOPPER);

        /*
         * Set RISC ICQ physical address start value.
         */
        ADW_WRITE_DWORD_LRAM(iot, ioh, ADW_MC_ICQ, le32toh(sc->icq_sp->carr_ba));

        /*
         * Initialize the COMMA register to the same value otherwise
         * the RISC will prematurely detect a command is available.
         */
        if(sc->chip_type == ADW_CHIP_ASC38C1600) {
                ADW_WRITE_DWORD_REGISTER(iot, ioh, IOPDW_COMMA,
                                                le32toh(sc->icq_sp->carr_ba));
        }

        /*
         * Set-up the RISC->Host Initiator Response Queue (IRQ).
         */
        if ((sc->irq_sp = sc->carr_freelist) == NULL) {
                return ADW_IERR_NO_CARRIER;
        }
        sc->carr_freelist = ADW_CARRIER_VADDR(sc,
                        ASC_GET_CARRP(sc->irq_sp->next_ba));

        /*
         * The first command completed by the RISC will be placed in
         * the stopper.
         *
         * Note: Set 'next_ba' to ASC_CQ_STOPPER. When the request is
         * completed the RISC will set the ASC_RQ_DONE bit.
         */
        sc->irq_sp->next_ba = htole32(ASC_CQ_STOPPER);

        /*
         * Set RISC IRQ physical address start value.
         */
        ADW_WRITE_DWORD_LRAM(iot, ioh, ADW_MC_IRQ, le32toh(sc->irq_sp->carr_ba));
        sc->carr_pending_cnt = 0;

        ADW_WRITE_BYTE_REGISTER(iot, ioh, IOPB_INTR_ENABLES,
                (ADW_INTR_ENABLE_HOST_INTR | ADW_INTR_ENABLE_GLOBAL_INTR));
        ADW_READ_WORD_LRAM(iot, ioh, ADW_MC_CODE_BEGIN_ADDR, word);
        ADW_WRITE_WORD_REGISTER(iot, ioh, IOPW_PC, word);

        /* finally, finally, gentlemen, start your engine */
        ADW_WRITE_WORD_REGISTER(iot, ioh, IOPW_RISC_CSR, ADW_RISC_CSR_RUN);

        /*
         * Reset the SCSI Bus if the EEPROM indicates that SCSI Bus
         * Resets should be performed. The RISC has to be running
         * to issue a SCSI Bus Reset.
         */
        if (sc->bios_ctrl & BIOS_CTRL_RESET_SCSI_BUS)
        {
                /*
                 * If the BIOS Signature is present in memory, restore the
                 * BIOS Handshake Configuration Table and do not perform
                 * a SCSI Bus Reset.
                 */
                if (bios_mem[(ADW_MC_BIOS_SIGNATURE - ADW_MC_BIOSMEM)/2] ==
                                0x55AA) {
                        /*
                         * Restore per TID negotiated values.
                         */
                        ADW_WRITE_WORD_LRAM(iot, ioh, ADW_MC_WDTR_ABLE,
                                        wdtr_able);
                        ADW_WRITE_WORD_LRAM(iot, ioh, ADW_MC_SDTR_ABLE,
                                        sdtr_able);
                        ADW_WRITE_WORD_LRAM(iot, ioh, ADW_MC_TAGQNG_ABLE,
                                        tagqng_able);
                        for (tid = 0; tid <= ADW_MAX_TID; tid++) {
                                ADW_WRITE_BYTE_LRAM(iot, ioh,
                                                ADW_MC_NUMBER_OF_MAX_CMD + tid,
                                                max_cmd[tid]);
                        }
                } else {
                        if (AdwResetCCB(sc) != ADW_TRUE) {
                                error_code = ADW_WARN_BUSRESET_ERROR;
                        }
                }
        }

        return error_code;
}


int
AdwRamSelfTest(bus_space_tag_t iot, bus_space_handle_t ioh, u_int8_t chip_type)
{
        int             i;
        u_int8_t        byte;


        if ((chip_type == ADW_CHIP_ASC38C0800) ||
            (chip_type == ADW_CHIP_ASC38C1600)) {
                /*
                 * RAM BIST (RAM Built-In Self Test)
                 *
                 * Address : I/O base + offset 0x38h register (byte).
                 * Function: Bit 7-6(RW) : RAM mode
                 *                          Normal Mode   : 0x00
                 *                          Pre-test Mode : 0x40
                 *                          RAM Test Mode : 0x80
                 *           Bit 5       : unused
                 *           Bit 4(RO)   : Done bit
                 *           Bit 3-0(RO) : Status
                 *                          Host Error    : 0x08
                 *                          Int_RAM Error : 0x04
                 *                          RISC Error    : 0x02
                 *                          SCSI Error    : 0x01
                 *                          No Error      : 0x00
                 *
                 * Note: RAM BIST code should be put right here, before loading
                 * the microcode and after saving the RISC memory BIOS region.
                 */

                /*
                 * LRAM Pre-test
                 *
                 * Write PRE_TEST_MODE (0x40) to register and wait for
                 * 10 milliseconds.
                 * If Done bit not set or low nibble not PRE_TEST_VALUE (0x05),
                 * return an error. Reset to NORMAL_MODE (0x00) and do again.
                 * If cannot reset to NORMAL_MODE, return an error too.
                 */
                for (i = 0; i < 2; i++) {
                        ADW_WRITE_BYTE_REGISTER(iot, ioh, IOPB_RAM_BIST,
                                        PRE_TEST_MODE);
                         /* Wait for 10ms before reading back. */
                        AdwSleepMilliSecond(10);
                        byte = ADW_READ_BYTE_REGISTER(iot, ioh, IOPB_RAM_BIST);
                        if ((byte & RAM_TEST_DONE) == 0 || (byte & 0x0F) !=
                                        PRE_TEST_VALUE) {
                                return ADW_IERR_BIST_PRE_TEST;
                        }

                        ADW_WRITE_BYTE_REGISTER(iot, ioh, IOPB_RAM_BIST,
                                                                NORMAL_MODE);
                        /* Wait for 10ms before reading back. */
                        AdwSleepMilliSecond(10);
                        if (ADW_READ_BYTE_REGISTER(iot, ioh, IOPB_RAM_BIST)
                            != NORMAL_VALUE) {
                                return ADW_IERR_BIST_PRE_TEST;
                        }
                }

                /*
                 * LRAM Test - It takes about 1.5 ms to run through the test.
                 *
                 * Write RAM_TEST_MODE (0x80) to register and wait for
                 * 10 milliseconds.
                 * If Done bit not set or Status not 0, save register byte,
                 * set the err_code, and return an error.
                 */
                ADW_WRITE_BYTE_REGISTER(iot, ioh, IOPB_RAM_BIST, RAM_TEST_MODE);
                /* Wait for 10ms before checking status. */
                AdwSleepMilliSecond(10);

                byte = ADW_READ_BYTE_REGISTER(iot, ioh, IOPB_RAM_BIST);
                if ((byte & RAM_TEST_DONE)==0 || (byte & RAM_TEST_STATUS)!=0) {
                        /* Get here if Done bit not set or Status not 0. */
                        return ADW_IERR_BIST_RAM_TEST;
                }

                /* We need to reset back to normal mode after LRAM test passes*/
                ADW_WRITE_BYTE_REGISTER(iot, ioh, IOPB_RAM_BIST, NORMAL_MODE);
        }

        return 0;
}


int
AdwLoadMCode(bus_space_tag_t iot, bus_space_handle_t ioh, u_int16_t *bios_mem, u_int8_t chip_type)
{
        const u_int8_t  *mcode_data;
        u_int32_t        mcode_chksum;
        u_int16_t        mcode_size;
        u_int32_t       sum;
        u_int16_t       code_sum;
        int             begin_addr;
        int             end_addr;
        int             word;
        int             adw_memsize;
        int             adw_mcode_expanded_size;
        int             i, j;


        switch(chip_type) {
        case ADW_CHIP_ASC3550:
                mcode_data = (const u_int8_t *)adw_asc3550_mcode_data.mcode_data;
                mcode_chksum = (u_int32_t)adw_asc3550_mcode_data.mcode_chksum;
                mcode_size = (u_int16_t)adw_asc3550_mcode_data.mcode_size;
                adw_memsize = ADW_3550_MEMSIZE;
                break;

        case ADW_CHIP_ASC38C0800:
                mcode_data = (const u_int8_t *)adw_asc38C0800_mcode_data.mcode_data;
                mcode_chksum =(u_int32_t)adw_asc38C0800_mcode_data.mcode_chksum;
                mcode_size = (u_int16_t)adw_asc38C0800_mcode_data.mcode_size;
                adw_memsize = ADW_38C0800_MEMSIZE;
                break;

        case ADW_CHIP_ASC38C1600:
                mcode_data = (const u_int8_t *)adw_asc38C1600_mcode_data.mcode_data;
                mcode_chksum =(u_int32_t)adw_asc38C1600_mcode_data.mcode_chksum;
                mcode_size = (u_int16_t)adw_asc38C1600_mcode_data.mcode_size;
                adw_memsize = ADW_38C1600_MEMSIZE;
                break;

        default:
                return (EINVAL);
        }

        /*
         * Write the microcode image to RISC memory starting at address 0.
         */
        ADW_WRITE_WORD_REGISTER(iot, ioh, IOPW_RAM_ADDR, 0);

        /* Assume the following compressed format of the microcode buffer:
         *
         *  254 word (508 byte) table indexed by byte code followed
         *  by the following byte codes:
         *
         *    1-Byte Code:
         *      00: Emit word 0 in table.
         *      01: Emit word 1 in table.
         *      .
         *      FD: Emit word 253 in table.
         *
         *    Multi-Byte Code:
         *      FE WW WW: (3 byte code) Word to emit is the next word WW WW.
         *      FF BB WW WW: (4 byte code) Emit BB count times next word WW WW.
         */
        word = 0;
        for (i = 253 * 2; i < mcode_size; i++) {
                if (mcode_data[i] == 0xff) {
                        for (j = 0; j < mcode_data[i + 1]; j++) {
                                ADW_WRITE_WORD_AUTO_INC_LRAM(iot, ioh,
                                  (((u_int16_t)mcode_data[i + 3] << 8) |
                                  mcode_data[i + 2]));
                                word++;
                        }
                        i += 3;
                } else if (mcode_data[i] == 0xfe) {
                        ADW_WRITE_WORD_AUTO_INC_LRAM(iot, ioh,
                            (((u_int16_t)mcode_data[i + 2] << 8) |
                            mcode_data[i + 1]));
                        i += 2;
                        word++;
                } else {
                        ADW_WRITE_WORD_AUTO_INC_LRAM(iot, ioh, (((u_int16_t)
                         mcode_data[(mcode_data[i] * 2) + 1] <<8) |
                         mcode_data[mcode_data[i] * 2]));
                        word++;
                }
        }

        /*
         * Set 'word' for later use to clear the rest of memory and save
         * the expanded mcode size.
         */
        word *= 2;
        adw_mcode_expanded_size = word;

        /*
         * Clear the rest of the Internal RAM.
         */
        for (; word < adw_memsize; word += 2) {
                ADW_WRITE_WORD_AUTO_INC_LRAM(iot, ioh, 0);
        }

        /*
         * Verify the microcode checksum.
         */
        sum = 0;
        ADW_WRITE_WORD_REGISTER(iot, ioh, IOPW_RAM_ADDR, 0);

        for (word = 0; word < adw_mcode_expanded_size; word += 2) {
                sum += ADW_READ_WORD_AUTO_INC_LRAM(iot, ioh);
        }

        if (sum != mcode_chksum) {
                return ADW_IERR_MCODE_CHKSUM;
        }

        /*
         * Restore the RISC memory BIOS region.
         */
        for (i = 0; i < ADW_MC_BIOSLEN/2; i++) {
                if(chip_type == ADW_CHIP_ASC3550) {
                        ADW_WRITE_BYTE_LRAM(iot, ioh, ADW_MC_BIOSMEM + (2 * i),
                                                                bios_mem[i]);
                } else {
                        ADW_WRITE_WORD_LRAM(iot, ioh, ADW_MC_BIOSMEM + (2 * i),
                                                                bios_mem[i]);
                }
        }

        /*
         * Calculate and write the microcode code checksum to the microcode
         * code checksum location ADW_MC_CODE_CHK_SUM (0x2C).
         */
        ADW_READ_WORD_LRAM(iot, ioh, ADW_MC_CODE_BEGIN_ADDR, begin_addr);
        ADW_READ_WORD_LRAM(iot, ioh, ADW_MC_CODE_END_ADDR, end_addr);
        code_sum = 0;
        ADW_WRITE_WORD_REGISTER(iot, ioh, IOPW_RAM_ADDR, begin_addr);
        for (word = begin_addr; word < end_addr; word += 2) {
                code_sum += ADW_READ_WORD_AUTO_INC_LRAM(iot, ioh);
        }
        ADW_WRITE_WORD_LRAM(iot, ioh, ADW_MC_CODE_CHK_SUM, code_sum);

        /*
         * Set the chip type.
         */
        ADW_WRITE_WORD_LRAM(iot, ioh, ADW_MC_CHIP_TYPE, chip_type);

        return 0;
}


int
AdwASC3550Cabling(bus_space_tag_t iot, bus_space_handle_t ioh, ADW_DVC_CFG *cfg)
{
        u_int16_t       scsi_cfg1;


        /*
         * Determine SCSI_CFG1 Microcode Default Value.
         *
         * The microcode will set the SCSI_CFG1 register using this value
         * after it is started below.
         */

        /* Read current SCSI_CFG1 Register value. */
        scsi_cfg1 = ADW_READ_WORD_REGISTER(iot, ioh, IOPW_SCSI_CFG1);

        /*
         * If all three connectors are in use in ASC3550, return an error.
         */
        if ((scsi_cfg1 & CABLE_ILLEGAL_A) == 0 ||
             (scsi_cfg1 & CABLE_ILLEGAL_B) == 0) {
                return ADW_IERR_ILLEGAL_CONNECTION;
        }

        /*
         * If the cable is reversed all of the SCSI_CTRL register signals
         * will be set. Check for and return an error if this condition is
         * found.
         */
        if ((ADW_READ_WORD_REGISTER(iot,ioh, IOPW_SCSI_CTRL) & 0x3F07)==0x3F07){
                return ADW_IERR_REVERSED_CABLE;
        }

        /*
         * If this is a differential board and a single-ended device
         * is attached to one of the connectors, return an error.
         */
        if ((scsi_cfg1 & ADW_DIFF_MODE) &&
            (scsi_cfg1 & ADW_DIFF_SENSE) == 0) {
                return ADW_IERR_SINGLE_END_DEVICE;
        }

        /*
         * If automatic termination control is enabled, then set the
         * termination value based on a table listed in a_condor.h.
         *
         * If manual termination was specified with an EEPROM setting
         * then 'termination' was set-up in AdwInitFromEEPROM() and
         * is ready to be 'ored' into SCSI_CFG1.
         */
        if (cfg->termination == 0) {
                /*
                 * The software always controls termination by setting
                 * TERM_CTL_SEL.
                 * If TERM_CTL_SEL were set to 0, the hardware would set
                 * termination.
                 */
                cfg->termination |= ADW_TERM_CTL_SEL;

                switch(scsi_cfg1 & ADW_CABLE_DETECT) {
                        /* TERM_CTL_H: on, TERM_CTL_L: on */
                        case 0x3: case 0x7: case 0xB:
                        case 0xD: case 0xE: case 0xF:
                                cfg->termination |=
                                (ADW_TERM_CTL_H | ADW_TERM_CTL_L);
                                break;

                        /* TERM_CTL_H: on, TERM_CTL_L: off */
                        case 0x1: case 0x5: case 0x9:
                        case 0xA: case 0xC:
                                cfg->termination |= ADW_TERM_CTL_H;
                                break;

                        /* TERM_CTL_H: off, TERM_CTL_L: off */
                        case 0x2: case 0x6:
                                break;
                }
        }

        /*
         * Clear any set TERM_CTL_H and TERM_CTL_L bits.
         */
        scsi_cfg1 &= ~ADW_TERM_CTL;

        /*
         * Invert the TERM_CTL_H and TERM_CTL_L bits and then
         * set 'scsi_cfg1'. The TERM_POL bit does not need to be
         * referenced, because the hardware internally inverts
         * the Termination High and Low bits if TERM_POL is set.
         */
        scsi_cfg1 |= (ADW_TERM_CTL_SEL | (~cfg->termination & ADW_TERM_CTL));

        /*
         * Set SCSI_CFG1 Microcode Default Value
         *
         * Set filter value and possibly modified termination control
         * bits in the Microcode SCSI_CFG1 Register Value.
         *
         * The microcode will set the SCSI_CFG1 register using this value
         * after it is started below.
         */
        ADW_WRITE_WORD_LRAM(iot, ioh, ADW_MC_DEFAULT_SCSI_CFG1,
                                                ADW_FLTR_DISABLE | scsi_cfg1);

        /*
         * Set MEM_CFG Microcode Default Value
         *
         * The microcode will set the MEM_CFG register using this value
         * after it is started below.
         *
         * MEM_CFG may be accessed as a word or byte, but only bits 0-7
         * are defined.
         *
         * ASC-3550 has 8KB internal memory.
         */
        ADW_WRITE_WORD_LRAM(iot, ioh, ADW_MC_DEFAULT_MEM_CFG,
                                                ADW_BIOS_EN | ADW_RAM_SZ_8KB);

        return 0;
}


int
AdwASC38C0800Cabling(bus_space_tag_t iot, bus_space_handle_t ioh, ADW_DVC_CFG *cfg)
{
        u_int16_t       scsi_cfg1;


        /*
         * Determine SCSI_CFG1 Microcode Default Value.
         *
         * The microcode will set the SCSI_CFG1 register using this value
         * after it is started below.
         */

        /* Read current SCSI_CFG1 Register value. */
        scsi_cfg1 = ADW_READ_WORD_REGISTER(iot, ioh, IOPW_SCSI_CFG1);

        /*
         * If the cable is reversed all of the SCSI_CTRL register signals
         * will be set. Check for and return an error if this condition is
         * found.
         */
        if ((ADW_READ_WORD_REGISTER(iot,ioh, IOPW_SCSI_CTRL) & 0x3F07)==0x3F07){
                return ADW_IERR_REVERSED_CABLE;
        }

        /*
         * All kind of combinations of devices attached to one of four
         * connectors are acceptable except HVD device attached.
         * For example, LVD device can be attached to SE connector while
         * SE device attached to LVD connector.
         * If LVD device attached to SE connector, it only runs up to
         * Ultra speed.
         *
         * If an HVD device is attached to one of LVD connectors, return
         * an error.
         * However, there is no way to detect HVD device attached to
         * SE connectors.
         */
        if (scsi_cfg1 & ADW_HVD) {
                return ADW_IERR_HVD_DEVICE;
        }

        /*
         * If either SE or LVD automatic termination control is enabled, then
         * set the termination value based on a table listed in a_condor.h.
         *
         * If manual termination was specified with an EEPROM setting then
         * 'termination' was set-up in AdwInitFromEEPROM() and is ready
         * to be 'ored' into SCSI_CFG1.
         */
        if ((cfg->termination & ADW_TERM_SE) == 0) {
                /* SE automatic termination control is enabled. */
                switch(scsi_cfg1 & ADW_C_DET_SE) {
                        /* TERM_SE_HI: on, TERM_SE_LO: on */
                        case 0x1: case 0x2: case 0x3:
                                cfg->termination |= ADW_TERM_SE;
                                break;

                        /* TERM_SE_HI: on, TERM_SE_LO: off */
                        case 0x0:
                                cfg->termination |= ADW_TERM_SE_HI;
                                break;
                }
        }

        if ((cfg->termination & ADW_TERM_LVD) == 0) {
                /* LVD automatic termination control is enabled. */
                switch(scsi_cfg1 & ADW_C_DET_LVD) {
                        /* TERM_LVD_HI: on, TERM_LVD_LO: on */
                        case 0x4: case 0x8: case 0xC:
                                cfg->termination |= ADW_TERM_LVD;
                                break;

                        /* TERM_LVD_HI: off, TERM_LVD_LO: off */
                        case 0x0:
                                break;
                }
        }

        /*
         * Clear any set TERM_SE and TERM_LVD bits.
         */
        scsi_cfg1 &= (~ADW_TERM_SE & ~ADW_TERM_LVD);

        /*
         * Invert the TERM_SE and TERM_LVD bits and then set 'scsi_cfg1'.
         */
        scsi_cfg1 |= (~cfg->termination & 0xF0);

        /*
         * Clear BIG_ENDIAN, DIS_TERM_DRV, Terminator Polarity and
         * HVD/LVD/SE bits and set possibly modified termination control bits
         * in the Microcode SCSI_CFG1 Register Value.
         */
        scsi_cfg1 &= (~ADW_BIG_ENDIAN & ~ADW_DIS_TERM_DRV &
                                        ~ADW_TERM_POL & ~ADW_HVD_LVD_SE);

        /*
         * Set SCSI_CFG1 Microcode Default Value
         *
         * Set possibly modified termination control and reset DIS_TERM_DRV
         * bits in the Microcode SCSI_CFG1 Register Value.
         *
         * The microcode will set the SCSI_CFG1 register using this value
         * after it is started below.
         */
        ADW_WRITE_WORD_LRAM(iot, ioh, ADW_MC_DEFAULT_SCSI_CFG1, scsi_cfg1);

        /*
         * Set MEM_CFG Microcode Default Value
         *
         * The microcode will set the MEM_CFG register using this value
         * after it is started below.
         *
         * MEM_CFG may be accessed as a word or byte, but only bits 0-7
         * are defined.
         *
         * ASC-38C0800 has 16KB internal memory.
         */
        ADW_WRITE_WORD_LRAM(iot, ioh, ADW_MC_DEFAULT_MEM_CFG,
                                                ADW_BIOS_EN | ADW_RAM_SZ_16KB);

        return 0;
}


int
AdwASC38C1600Cabling(bus_space_tag_t iot, bus_space_handle_t ioh, ADW_DVC_CFG *cfg)
{
        u_int16_t       scsi_cfg1;


        /*
         * Determine SCSI_CFG1 Microcode Default Value.
         *
         * The microcode will set the SCSI_CFG1 register using this value
         * after it is started below.
         * Each ASC-38C1600 function has only two cable detect bits.
         * The bus mode override bits are in IOPB_SOFT_OVER_WR.
         */

        /* Read current SCSI_CFG1 Register value. */
        scsi_cfg1 = ADW_READ_WORD_REGISTER(iot, ioh, IOPW_SCSI_CFG1);

        /*
         * If the cable is reversed all of the SCSI_CTRL register signals
         * will be set. Check for and return an error if this condition is
         * found.
         */
        if ((ADW_READ_WORD_REGISTER(iot,ioh, IOPW_SCSI_CTRL) & 0x3F07)==0x3F07){
                return ADW_IERR_REVERSED_CABLE;
        }

        /*
         * Each ASC-38C1600 function has two connectors. Only an HVD device
         * cannot be connected to either connector. An LVD device or SE device
         * may be connected to either connector. If an SE device is connected,
         * then at most Ultra speed (20 MHz) can be used on both connectors.
         *
         * If an HVD device is attached, return an error.
         */
        if (scsi_cfg1 & ADW_HVD) {
                return ADW_IERR_HVD_DEVICE;
        }

        /*
         * Each function in the ASC-38C1600 uses only the SE cable detect and
         * termination because there are two connectors for each function.
         * Each function may use either LVD or SE mode.
         * Corresponding the SE automatic termination control EEPROM bits are
         * used for each function.
         * Each function has its own EEPROM. If SE automatic control is enabled
         * for the function, then set the termination value based on a table
         * listed in adwlib.h.
         *
         * If manual termination is specified in the EEPROM for the function,
         * then 'termination' was set-up in AdwInitFromEEPROM() and is
         * ready to be 'ored' into SCSI_CFG1.
         */
        if ((cfg->termination & ADW_TERM_SE) == 0) {
                /* SE automatic termination control is enabled. */
                switch(scsi_cfg1 & ADW_C_DET_SE) {
                        /* TERM_SE_HI: on, TERM_SE_LO: on */
                        case 0x1: case 0x2: case 0x3:
                                cfg->termination |= ADW_TERM_SE;
                                break;

                        case 0x0:
#if 0
        /* !!!!TODO!!!! */
                                if (ASC_PCI_ID2FUNC(cfg->pci_slot_info) == 0) {
                                /* Function 0 - TERM_SE_HI: off, TERM_SE_LO: off */
                                }
                                else
#endif
                                {
                                /* Function 1 - TERM_SE_HI: on, TERM_SE_LO: off */
                                        cfg->termination |= ADW_TERM_SE_HI;
                                }
                                break;
                        }
        }

        /*
         * Clear any set TERM_SE bits.
         */
        scsi_cfg1 &= ~ADW_TERM_SE;

        /*
         * Invert the TERM_SE bits and then set 'scsi_cfg1'.
         */
        scsi_cfg1 |= (~cfg->termination & ADW_TERM_SE);

        /*
         * Clear Big Endian and Terminator Polarity bits and set possibly
         * modified termination control bits in the Microcode SCSI_CFG1
         * Register Value.
         */
        scsi_cfg1 &= (~ADW_BIG_ENDIAN & ~ADW_DIS_TERM_DRV & ~ADW_TERM_POL);

        /*
         * Set SCSI_CFG1 Microcode Default Value
         *
         * Set possibly modified termination control bits in the Microcode
         * SCSI_CFG1 Register Value.
         *
         * The microcode will set the SCSI_CFG1 register using this value
         * after it is started below.
         */
        ADW_WRITE_WORD_LRAM(iot, ioh, ADW_MC_DEFAULT_SCSI_CFG1, scsi_cfg1);

        /*
         * Set MEM_CFG Microcode Default Value
         *
         * The microcode will set the MEM_CFG register using this value
         * after it is started below.
         *
         * MEM_CFG may be accessed as a word or byte, but only bits 0-7
         * are defined.
         *
         * ASC-38C1600 has 32KB internal memory.
         */
        ADW_WRITE_WORD_LRAM(iot, ioh, ADW_MC_DEFAULT_MEM_CFG,
                                                ADW_BIOS_EN | ADW_RAM_SZ_32KB);

        return 0;
}


/*
 * Read EEPROM configuration into the specified buffer.
 *
 * Return a checksum based on the EEPROM configuration read.
 */
static u_int16_t
AdwGetEEPROMConfig(bus_space_tag_t iot, bus_space_handle_t ioh, ADW_EEPROM *cfg_buf)
{
        u_int16_t              wval, chksum;
        u_int16_t              *wbuf;
        int                 eep_addr;


        wbuf = (u_int16_t *) cfg_buf;
        chksum = 0;

        for (eep_addr = ASC_EEP_DVC_CFG_BEGIN;
                eep_addr < ASC_EEP_DVC_CFG_END;
                eep_addr++, wbuf++) {
                wval = AdwReadEEPWord(iot, ioh, eep_addr);
                chksum += wval;
                *wbuf = wval;
        }

        *wbuf = AdwReadEEPWord(iot, ioh, eep_addr);
        wbuf++;
        for (eep_addr = ASC_EEP_DVC_CTL_BEGIN;
                        eep_addr < ASC_EEP_MAX_WORD_ADDR;
                        eep_addr++, wbuf++) {
                *wbuf = AdwReadEEPWord(iot, ioh, eep_addr);
        }

        return chksum;
}


/*
 * Read the EEPROM from specified location
 */
static u_int16_t
AdwReadEEPWord(bus_space_tag_t iot, bus_space_handle_t ioh, int eep_word_addr)
{
        ADW_WRITE_WORD_REGISTER(iot, ioh, IOPW_EE_CMD,
                ASC_EEP_CMD_READ | eep_word_addr);
        AdwWaitEEPCmd(iot, ioh);

        return ADW_READ_WORD_REGISTER(iot, ioh, IOPW_EE_DATA);
}


/*
 * Wait for EEPROM command to complete
 */
static void
AdwWaitEEPCmd(bus_space_tag_t iot, bus_space_handle_t ioh)
{
        int eep_delay_ms;


        for (eep_delay_ms = 0; eep_delay_ms < ASC_EEP_DELAY_MS; eep_delay_ms++){
                if (ADW_READ_WORD_REGISTER(iot, ioh, IOPW_EE_CMD) &
                                ASC_EEP_CMD_DONE) {
                        break;
                }
                AdwSleepMilliSecond(1);
        }

        (void)ADW_READ_WORD_REGISTER(iot, ioh, IOPW_EE_CMD);
}


/*
 * Write the EEPROM from 'cfg_buf'.
 */
static void
AdwSetEEPROMConfig(bus_space_tag_t iot, bus_space_handle_t ioh, ADW_EEPROM *cfg_buf)
{
        u_int16_t *wbuf;
        u_int16_t addr, chksum;


        wbuf = (u_int16_t *) cfg_buf;
        chksum = 0;

        ADW_WRITE_WORD_REGISTER(iot, ioh, IOPW_EE_CMD, ASC_EEP_CMD_WRITE_ABLE);
        AdwWaitEEPCmd(iot, ioh);

        /*
         * Write EEPROM from word 0 to word 20
         */
        for (addr = ASC_EEP_DVC_CFG_BEGIN;
             addr < ASC_EEP_DVC_CFG_END; addr++, wbuf++) {
                chksum += *wbuf;
                ADW_WRITE_WORD_REGISTER(iot, ioh, IOPW_EE_DATA, *wbuf);
                ADW_WRITE_WORD_REGISTER(iot, ioh, IOPW_EE_CMD,
                                ASC_EEP_CMD_WRITE | addr);
                AdwWaitEEPCmd(iot, ioh);
                AdwSleepMilliSecond(ASC_EEP_DELAY_MS);
        }

        /*
         * Write EEPROM checksum at word 21
         */
        ADW_WRITE_WORD_REGISTER(iot, ioh, IOPW_EE_DATA, chksum);
        ADW_WRITE_WORD_REGISTER(iot, ioh, IOPW_EE_CMD,
                        ASC_EEP_CMD_WRITE | addr);
        AdwWaitEEPCmd(iot, ioh);
        wbuf++;        /* skip over check_sum */

        /*
         * Write EEPROM OEM name at words 22 to 29
         */
        for (addr = ASC_EEP_DVC_CTL_BEGIN;
             addr < ASC_EEP_MAX_WORD_ADDR; addr++, wbuf++) {
                ADW_WRITE_WORD_REGISTER(iot, ioh, IOPW_EE_DATA, *wbuf);
                ADW_WRITE_WORD_REGISTER(iot, ioh, IOPW_EE_CMD,
                                ASC_EEP_CMD_WRITE | addr);
                AdwWaitEEPCmd(iot, ioh);
        }

        ADW_WRITE_WORD_REGISTER(iot, ioh, IOPW_EE_CMD,
                        ASC_EEP_CMD_WRITE_DISABLE);
        AdwWaitEEPCmd(iot, ioh);

        return;
}


/*
 * AdwExeScsiQueue() - Send a request to the RISC microcode program.
 *
 *   Allocate a carrier structure, point the carrier to the ADW_SCSI_REQ_Q,
 *   add the carrier to the ICQ (Initiator Command Queue), and tickle the
 *   RISC to notify it a new command is ready to be executed.
 *
 * If 'done_status' is not set to QD_DO_RETRY, then 'error_retry' will be
 * set to SCSI_MAX_RETRY.
 *
 * Return:
 *      ADW_SUCCESS(1) - The request was successfully queued.
 *      ADW_BUSY(0) -    Resource unavailable; Retry again after pending
 *                       request completes.
 *      ADW_ERROR(-1) -  Invalid ADW_SCSI_REQ_Q request structure
 *                       host IC error.
 */
int
AdwExeScsiQueue(ADW_SOFTC *sc, ADW_SCSI_REQ_Q *scsiq)
{
        bus_space_tag_t iot = sc->sc_iot;
        bus_space_handle_t ioh = sc->sc_ioh;
        ADW_CCB         *ccb;
        u_int32_t       req_paddr;
        ADW_CARRIER     *new_carrp;

        /*
         * The ADW_SCSI_REQ_Q 'target_id' field should never exceed ADW_MAX_TID.
         */
        if (scsiq->target_id > ADW_MAX_TID) {
                scsiq->host_status = QHSTA_M_INVALID_DEVICE;
                scsiq->done_status = QD_WITH_ERROR;
                return ADW_ERROR;
        }

        /*
         * Begin of CRITICAL SECTION: Must be protected within splbio/splx pair
         */

        ccb = adw_ccb_phys_kv(sc, scsiq->ccb_ptr);

        /*
         * Allocate a carrier and initialize fields.
         */
        if ((new_carrp = sc->carr_freelist) == NULL) {
                return ADW_BUSY;
        }
        sc->carr_freelist = ADW_CARRIER_VADDR(sc,
                        ASC_GET_CARRP(new_carrp->next_ba));
        sc->carr_pending_cnt++;

        /*
         * Set the carrier to be a stopper by setting 'next_ba'
         * to the stopper value. The current stopper will be changed
         * below to point to the new stopper.
         */
        new_carrp->next_ba = htole32(ASC_CQ_STOPPER);

        req_paddr = sc->sc_dmamap_control->dm_segs[0].ds_addr +
                ADW_CCB_OFF(ccb) + offsetof(struct adw_ccb, scsiq);

        /* Save physical address of ADW_SCSI_REQ_Q and Carrier. */
        scsiq->scsiq_rptr = htole32(req_paddr);

        /*
         * Every ADV_CARR_T.carr_ba is byte swapped to little-endian
         * order during initialization.
         */
        scsiq->carr_ba = sc->icq_sp->carr_ba;
        scsiq->carr_va = sc->icq_sp->carr_ba;

        /*
         * Use the current stopper to send the ADW_SCSI_REQ_Q command to
         * the microcode. The newly allocated stopper will become the new
         * stopper.
         */
        sc->icq_sp->areq_ba = htole32(req_paddr);

        /*
         * Set the 'next_ba' pointer for the old stopper to be the
         * physical address of the new stopper. The RISC can only
         * follow physical addresses.
         */
        sc->icq_sp->next_ba = new_carrp->carr_ba;

#if ADW_DEBUG
        printf("icq 0x%x, 0x%x, 0x%x, 0x%x\n",
                        sc->icq_sp->carr_id,
                        sc->icq_sp->carr_ba,
                        sc->icq_sp->areq_ba,
                        sc->icq_sp->next_ba);
#endif
        /*
         * Set the host adapter stopper pointer to point to the new carrier.
         */
        sc->icq_sp = new_carrp;

        if (sc->chip_type == ADW_CHIP_ASC3550 ||
            sc->chip_type == ADW_CHIP_ASC38C0800) {
                /*
                 * Tickle the RISC to tell it to read its Command Queue Head
                 * pointer.
                 */
                ADW_WRITE_BYTE_REGISTER(iot, ioh, IOPB_TICKLE, ADW_TICKLE_A);
                if (sc->chip_type == ADW_CHIP_ASC3550) {
                        /*
                         * Clear the tickle value. In the ASC-3550 the RISC flag
                         * command 'clr_tickle_a' does not work unless the host
                         * value is cleared.
                         */
                        ADW_WRITE_BYTE_REGISTER(iot, ioh, IOPB_TICKLE,
                                        ADW_TICKLE_NOP);
                }
        } else if (sc->chip_type == ADW_CHIP_ASC38C1600) {
                /*
                 * Notify the RISC a carrier is ready by writing the physical
                 * address of the new carrier stopper to the COMMA register.
                 */
                ADW_WRITE_DWORD_REGISTER(iot, ioh, IOPDW_COMMA,
                                le32toh(new_carrp->carr_ba));
        }

        /*
         * End of CRITICAL SECTION: Must be protected within splbio/splx pair
         */

        return ADW_SUCCESS;
}


void
AdwResetChip(bus_space_tag_t iot, bus_space_handle_t ioh)
{

        /*
         * Reset Chip.
         */
        ADW_WRITE_WORD_REGISTER(iot, ioh, IOPW_CTRL_REG,
                        ADW_CTRL_REG_CMD_RESET);
        AdwSleepMilliSecond(100);
        ADW_WRITE_WORD_REGISTER(iot, ioh, IOPW_CTRL_REG,
                        ADW_CTRL_REG_CMD_WR_IO_REG);
}


/*
 * Reset SCSI Bus and purge all outstanding requests.
 *
 * Return Value:
 *      ADW_TRUE(1) -   All requests are purged and SCSI Bus is reset.
 *      ADW_FALSE(0) -  Microcode command failed.
 *      ADW_ERROR(-1) - Microcode command timed-out. Microcode or IC
 *                      may be hung which requires driver recovery.
 */
int
AdwResetCCB(ADW_SOFTC *sc)
{
        int         status;

        /*
         * Send the SCSI Bus Reset idle start idle command which asserts
         * the SCSI Bus Reset signal.
         */
        status = AdwSendIdleCmd(sc, (u_int16_t) IDLE_CMD_SCSI_RESET_START, 0L);
        if (status != ADW_TRUE) {
                return status;
        }

        /*
         * Delay for the specified SCSI Bus Reset hold time.
         *
         * The hold time delay is done on the host because the RISC has no
         * microsecond accurate timer.
         */
        AdwDelayMicroSecond((u_int16_t) ASC_SCSI_RESET_HOLD_TIME_US);

        /*
         * Send the SCSI Bus Reset end idle command which de-asserts
         * the SCSI Bus Reset signal and purges any pending requests.
         */
        status = AdwSendIdleCmd(sc, (u_int16_t) IDLE_CMD_SCSI_RESET_END, 0L);
        if (status != ADW_TRUE) {
                return status;
        }

        AdwSleepMilliSecond((u_int32_t) sc->scsi_reset_wait * 1000);

        return status;
}


/*
 * Reset chip and SCSI Bus.
 *
 * Return Value:
 *      ADW_TRUE(1) -   Chip re-initialization and SCSI Bus Reset successful.
 *      ADW_FALSE(0) -  Chip re-initialization and SCSI Bus Reset failure.
 */
int
AdwResetSCSIBus(ADW_SOFTC *sc)
{
        bus_space_tag_t iot = sc->sc_iot;
        bus_space_handle_t ioh = sc->sc_ioh;
        int             status;
        u_int16_t       wdtr_able, sdtr_able, tagqng_able;
        u_int16_t       ppr_able = 0; /* XXX: gcc */
        u_int8_t        tid, max_cmd[ADW_MAX_TID + 1];
        u_int16_t       bios_sig;


        /*
         * Save current per TID negotiated values.
         */
        ADW_READ_WORD_LRAM(iot, ioh, ADW_MC_WDTR_ABLE, wdtr_able);
        ADW_READ_WORD_LRAM(iot, ioh, ADW_MC_SDTR_ABLE, sdtr_able);
        if (sc->chip_type == ADW_CHIP_ASC38C1600) {
                ADW_READ_WORD_LRAM(iot, ioh, ADW_MC_PPR_ABLE, ppr_able);
        }
        ADW_READ_WORD_LRAM(iot, ioh, ADW_MC_TAGQNG_ABLE, tagqng_able);
        for (tid = 0; tid <= ADW_MAX_TID; tid++) {
                ADW_READ_BYTE_LRAM(iot, ioh, ADW_MC_NUMBER_OF_MAX_CMD + tid,
                        max_cmd[tid]);
        }

        /*
         * Force the AdwInitAscDriver() function to perform a SCSI Bus Reset
         * by clearing the BIOS signature word.
         * The initialization functions assumes a SCSI Bus Reset is not
         * needed if the BIOS signature word is present.
         */
        ADW_READ_WORD_LRAM(iot, ioh, ADW_MC_BIOS_SIGNATURE, bios_sig);
        ADW_WRITE_WORD_LRAM(iot, ioh, ADW_MC_BIOS_SIGNATURE, 0);

        /*
         * Stop chip and reset it.
         */
        ADW_WRITE_WORD_REGISTER(iot, ioh, IOPW_RISC_CSR, ADW_RISC_CSR_STOP);
        ADW_WRITE_WORD_REGISTER(iot, ioh, IOPW_CTRL_REG,
                        ADW_CTRL_REG_CMD_RESET);
        AdwSleepMilliSecond(100);
        ADW_WRITE_WORD_REGISTER(iot, ioh, IOPW_CTRL_REG,
                        ADW_CTRL_REG_CMD_WR_IO_REG);

        /*
         * Reset Adv Library error code, if any, and try
         * re-initializing the chip.
         * Then translate initialization return value to status value.
         */
        status = (AdwInitDriver(sc) == 0)? ADW_TRUE : ADW_FALSE;

        /*
         * Restore the BIOS signature word.
         */
        ADW_WRITE_WORD_LRAM(iot, ioh, ADW_MC_BIOS_SIGNATURE, bios_sig);

        /*
         * Restore per TID negotiated values.
         */
        ADW_WRITE_WORD_LRAM(iot, ioh, ADW_MC_WDTR_ABLE, wdtr_able);
        ADW_WRITE_WORD_LRAM(iot, ioh, ADW_MC_SDTR_ABLE, sdtr_able);
        if (sc->chip_type == ADW_CHIP_ASC38C1600) {
                ADW_WRITE_WORD_LRAM(iot, ioh, ADW_MC_PPR_ABLE, ppr_able);
        }
        ADW_WRITE_WORD_LRAM(iot, ioh, ADW_MC_TAGQNG_ABLE, tagqng_able);
        for (tid = 0; tid <= ADW_MAX_TID; tid++) {
                ADW_WRITE_BYTE_LRAM(iot, ioh, ADW_MC_NUMBER_OF_MAX_CMD + tid,
                        max_cmd[tid]);
        }

        return status;
}


/*
 * Adv Library Interrupt Service Routine
 *
 *  This function is called by a driver's interrupt service routine.
 *  The function disables and re-enables interrupts.
 *
 *  When a microcode idle command is completed, the ADV_DVC_VAR
 *  'idle_cmd_done' field is set to ADW_TRUE.
 *
 *  Note: AdwISR() can be called when interrupts are disabled or even
 *  when there is no hardware interrupt condition present. It will
 *  always check for completed idle commands and microcode requests.
 *  This is an important feature that shouldn't be changed because it
 *  allows commands to be completed from polling mode loops.
 *
 * Return:
 *   ADW_TRUE(1) - interrupt was pending
 *   ADW_FALSE(0) - no interrupt was pending
 */
int
AdwISR(ADW_SOFTC *sc)
{
        bus_space_tag_t iot = sc->sc_iot;
        bus_space_handle_t ioh = sc->sc_ioh;
        u_int8_t        int_stat;
        ADW_CARRIER     *free_carrp/*, *ccb_carr*/;
        u_int32_t       irq_next_pa;
        ADW_SCSI_REQ_Q  *scsiq;
        ADW_CCB         *ccb;
        int             s;


        s = splbio();

        /* Reading the register clears the interrupt. */
        int_stat = ADW_READ_BYTE_REGISTER(iot, ioh, IOPB_INTR_STATUS_REG);

        if ((int_stat & (ADW_INTR_STATUS_INTRA | ADW_INTR_STATUS_INTRB |
             ADW_INTR_STATUS_INTRC)) == 0) {
                splx(s);
                return ADW_FALSE;
        }

        /*
         * Notify the driver of an asynchronous microcode condition by
         * calling the ADV_DVC_VAR.async_callback function. The function
         * is passed the microcode ADW_MC_INTRB_CODE byte value.
         */
        if (int_stat & ADW_INTR_STATUS_INTRB) {
                u_int8_t intrb_code;

                ADW_READ_BYTE_LRAM(iot, ioh, ADW_MC_INTRB_CODE, intrb_code);

                if (sc->chip_type == ADW_CHIP_ASC3550 ||
                    sc->chip_type == ADW_CHIP_ASC38C0800) {
                        if (intrb_code == ADV_ASYNC_CARRIER_READY_FAILURE &&
                                sc->carr_pending_cnt != 0) {
                                ADW_WRITE_BYTE_REGISTER(iot, ioh,
                                        IOPB_TICKLE, ADW_TICKLE_A);
                                if (sc->chip_type == ADW_CHIP_ASC3550) {
                                        ADW_WRITE_BYTE_REGISTER(iot, ioh,
                                                IOPB_TICKLE, ADW_TICKLE_NOP);
                                }
                        }
                }

                if (sc->async_callback != 0) {
                    (*(ADW_ASYNC_CALLBACK)sc->async_callback)(sc, intrb_code);
                }
        }

        /*
         * Check if the IRQ stopper carrier contains a completed request.
         */
        while (((le32toh(irq_next_pa = sc->irq_sp->next_ba)) & ASC_RQ_DONE) != 0)
        {
#if ADW_DEBUG
                printf("irq 0x%x, 0x%x, 0x%x, 0x%x\n",
                                sc->irq_sp->carr_id,
                                sc->irq_sp->carr_ba,
                                sc->irq_sp->areq_ba,
                                sc->irq_sp->next_ba);
#endif
                /*
                 * Get a pointer to the newly completed ADW_SCSI_REQ_Q
                 * structure.
                 * The RISC will have set 'areq_ba' to a virtual address.
                 *
                 * The firmware will have copied the ASC_SCSI_REQ_Q.ccb_ptr
                 * field to the carrier ADV_CARR_T.areq_ba field.
                 * The conversion below complements the conversion of
                 * ASC_SCSI_REQ_Q.scsiq_ptr' in AdwExeScsiQueue().
                 */
                ccb = adw_ccb_phys_kv(sc, sc->irq_sp->areq_ba);
                scsiq = &ccb->scsiq;
                scsiq->ccb_ptr = sc->irq_sp->areq_ba;

                /*
                 * Request finished with good status and the queue was not
                 * DMAed to host memory by the firmware. Set all status fields
                 * to indicate good status.
                 */
                if ((le32toh(irq_next_pa) & ASC_RQ_GOOD) != 0) {
                        scsiq->done_status = QD_NO_ERROR;
                        scsiq->host_status = scsiq->scsi_status = 0;
                        scsiq->data_cnt = 0L;
                }

                /*
                 * Advance the stopper pointer to the next carrier
                 * ignoring the lower four bits. Free the previous
                 * stopper carrier.
                 */
                free_carrp = sc->irq_sp;
                sc->irq_sp = ADW_CARRIER_VADDR(sc, ASC_GET_CARRP(irq_next_pa));

                free_carrp->next_ba = (sc->carr_freelist == NULL) ? 0
                                        : sc->carr_freelist->carr_ba;
                sc->carr_freelist = free_carrp;
                sc->carr_pending_cnt--;

                /*
                 * Clear request microcode control flag.
                 */
                scsiq->cntl = 0;

                /*
                 * Check Condition handling
                 */
                /*
                 * If the command that completed was a SCSI INQUIRY and
                 * LUN 0 was sent the command, then process the INQUIRY
                 * command information for the device.
                 */
                if (scsiq->done_status == QD_NO_ERROR &&
                    scsiq->cdb[0] == INQUIRY &&
                    scsiq->target_lun == 0) {
                        AdwInquiryHandling(sc, scsiq);
                }

                /*
                 * Notify the driver of the completed request by passing
                 * the ADW_SCSI_REQ_Q pointer to its callback function.
                 */
                (*(ADW_ISR_CALLBACK)sc->isr_callback)(sc, scsiq);
                /*
                 * Note: After the driver callback function is called, 'scsiq'
                 * can no longer be referenced.
                 *
                 * Fall through and continue processing other completed
                 * requests...
                 */
        }

        splx(s);

        return ADW_TRUE;
}


/*
 * Send an idle command to the chip and wait for completion.
 *
 * Command completion is polled for once per microsecond.
 *
 * The function can be called from anywhere including an interrupt handler.
 * But the function is not re-entrant, so it uses the splbio/splx()
 * functions to prevent reentrancy.
 *
 * Return Values:
 *   ADW_TRUE - command completed successfully
 *   ADW_FALSE - command failed
 *   ADW_ERROR - command timed out
 */
int
AdwSendIdleCmd(ADW_SOFTC *sc, u_int16_t idle_cmd, u_int32_t idle_cmd_parameter)
{
        bus_space_tag_t iot = sc->sc_iot;
        bus_space_handle_t ioh = sc->sc_ioh;
        u_int16_t       result;
        u_int32_t       i, j, s;

        s = splbio();

        /*
         * Clear the idle command status which is set by the microcode
         * to a non-zero value to indicate when the command is completed.
         */
        ADW_WRITE_WORD_LRAM(iot, ioh, ADW_MC_IDLE_CMD_STATUS, (u_int16_t) 0);

        /*
         * Write the idle command value after the idle command parameter
         * has been written to avoid a race condition. If the order is not
         * followed, the microcode may process the idle command before the
         * parameters have been written to LRAM.
         */
        ADW_WRITE_DWORD_LRAM(iot, ioh, ADW_MC_IDLE_CMD_PARAMETER,
                        idle_cmd_parameter);
        ADW_WRITE_WORD_LRAM(iot, ioh, ADW_MC_IDLE_CMD, idle_cmd);

        /*
         * Tickle the RISC to tell it to process the idle command.
         */
        ADW_WRITE_BYTE_REGISTER(iot, ioh, IOPB_TICKLE, ADW_TICKLE_B);
        if (sc->chip_type == ADW_CHIP_ASC3550) {
                /*
                 * Clear the tickle value. In the ASC-3550 the RISC flag
                 * command 'clr_tickle_b' does not work unless the host
                 * value is cleared.
                 */
                ADW_WRITE_BYTE_REGISTER(iot, ioh, IOPB_TICKLE, ADW_TICKLE_NOP);
        }

        /* Wait for up to 100 millisecond for the idle command to timeout. */
        for (i = 0; i < SCSI_WAIT_100_MSEC; i++) {
                /* Poll once each microsecond for command completion. */
                for (j = 0; j < SCSI_US_PER_MSEC; j++) {
                        ADW_READ_WORD_LRAM(iot, ioh, ADW_MC_IDLE_CMD_STATUS,
                                                                        result);
                        if (result != 0) {
                                splx(s);
                                return result;
                        }
                        AdwDelayMicroSecond(1);
                }
        }

        splx(s);
        return ADW_ERROR;
}


/*
 * Inquiry Information Byte 7 Handling
 *
 * Handle SCSI Inquiry Command information for a device by setting
 * microcode operating variables that affect WDTR, SDTR, and Tag
 * Queuing.
 */
static void
AdwInquiryHandling(ADW_SOFTC *sc, ADW_SCSI_REQ_Q *scsiq)
{
#ifndef FAILSAFE
        bus_space_tag_t iot = sc->sc_iot;
        bus_space_handle_t ioh = sc->sc_ioh;
        u_int8_t                tid;
        struct scsipi_inquiry_data *inq;
        u_int16_t               tidmask;
        u_int16_t               cfg_word;


        /*
         * AdwInquiryHandling() requires up to INQUIRY information Byte 7
         * to be available.
         *
         * If less than 8 bytes of INQUIRY information were requested or less
         * than 8 bytes were transferred, then return. cdb[4] is the request
         * length and the ADW_SCSI_REQ_Q 'data_cnt' field is set by the
         * microcode to the transfer residual count.
         */

        if (scsiq->cdb[4] < 8 || (scsiq->cdb[4] - scsiq->data_cnt) < 8) {
                return;
        }

        tid = scsiq->target_id;

        inq = (struct scsipi_inquiry_data *) scsiq->vdata_addr;

        /*
         * WDTR, SDTR, and Tag Queuing cannot be enabled for old devices.
         */
        if (((inq->response_format & SID_RespDataFmt) < 2) /*SCSI-1 | CCS*/ &&
            ((inq->version & SID_ANSII) < 2)) {
                return;
        } else {
                /*
                 * INQUIRY Byte 7 Handling
                 *
                 * Use a device's INQUIRY byte 7 to determine whether it
                 * supports WDTR, SDTR, and Tag Queuing. If the feature
                 * is enabled in the EEPROM and the device supports the
                 * feature, then enable it in the microcode.
                 */

                tidmask = ADW_TID_TO_TIDMASK(tid);

                /*
                 * Wide Transfers
                 *
                 * If the EEPROM enabled WDTR for the device and the device
                 * supports wide bus (16 bit) transfers, then turn on the
                 * device's 'wdtr_able' bit and write the new value to the
                 * microcode.
                 */
#ifdef SCSI_ADW_WDTR_DISABLE
        if(!(tidmask & SCSI_ADW_WDTR_DISABLE))
#endif /* SCSI_ADW_WDTR_DISABLE */
                if ((sc->wdtr_able & tidmask) && (inq->flags3 & SID_WBus16)) {
                        ADW_READ_WORD_LRAM(iot, ioh, ADW_MC_WDTR_ABLE,
                                        cfg_word);
                        if ((cfg_word & tidmask) == 0) {
                                cfg_word |= tidmask;
                                ADW_WRITE_WORD_LRAM(iot, ioh, ADW_MC_WDTR_ABLE,
                                                cfg_word);

                                /*
                                 * Clear the microcode "SDTR negotiation" and
                                 * "WDTR negotiation" done indicators for the
                                 * target to cause it to negotiate with the new
                                 * setting set above.
                                 * WDTR when accepted causes the target to enter
                                 * asynchronous mode, so SDTR must be negotiated
                                 */
                                ADW_READ_WORD_LRAM(iot, ioh, ADW_MC_SDTR_DONE,
                                                cfg_word);
                                cfg_word &= ~tidmask;
                                ADW_WRITE_WORD_LRAM(iot, ioh, ADW_MC_SDTR_DONE,
                                                cfg_word);
                                ADW_READ_WORD_LRAM(iot, ioh, ADW_MC_WDTR_DONE,
                                                cfg_word);
                                cfg_word &= ~tidmask;
                                ADW_WRITE_WORD_LRAM(iot, ioh, ADW_MC_WDTR_DONE,
                                                cfg_word);
                        }
                }

                /*
                 * Synchronous Transfers
                 *
                 * If the EEPROM enabled SDTR for the device and the device
                 * supports synchronous transfers, then turn on the device's
                 * 'sdtr_able' bit. Write the new value to the microcode.
                 */
#ifdef SCSI_ADW_SDTR_DISABLE
        if(!(tidmask & SCSI_ADW_SDTR_DISABLE))
#endif /* SCSI_ADW_SDTR_DISABLE */
                if ((sc->sdtr_able & tidmask) && (inq->flags3 & SID_Sync)) {
                        ADW_READ_WORD_LRAM(iot, ioh, ADW_MC_SDTR_ABLE,cfg_word);
                        if ((cfg_word & tidmask) == 0) {
                                cfg_word |= tidmask;
                                ADW_WRITE_WORD_LRAM(iot, ioh, ADW_MC_SDTR_ABLE,
                                                cfg_word);

                                /*
                                 * Clear the microcode "SDTR negotiation"
                                 * done indicator for the target to cause it
                                 * to negotiate with the new setting set above.
                                 */
                                ADW_READ_WORD_LRAM(iot, ioh, ADW_MC_SDTR_DONE,
                                                cfg_word);
                                cfg_word &= ~tidmask;
                                ADW_WRITE_WORD_LRAM(iot, ioh, ADW_MC_SDTR_DONE,
                                                cfg_word);
                        }
                }
                /*
                 * If the Inquiry data included enough space for the SPI-3
                 * Clocking field, then check if DT mode is supported.
                 */
                if (sc->chip_type == ADW_CHIP_ASC38C1600 &&
                   (scsiq->cdb[4] >= 57 ||
                   (scsiq->cdb[4] - scsiq->data_cnt) >= 57)) {
                        /*
                         * PPR (Parallel Protocol Request) Capable
                         *
                         * If the device supports DT mode, then it must be
                         * PPR capable.
                         * The PPR message will be used in place of the SDTR
                         * and WDTR messages to negotiate synchronous speed
                         * and offset, transfer width, and protocol options.
                         */
                        if((inq->flags4 & SID_Clocking) & SID_CLOCKING_DT_ONLY){
                                ADW_READ_WORD_LRAM(iot, ioh, ADW_MC_PPR_ABLE,
                                                sc->ppr_able);
                                sc->ppr_able |= tidmask;
                                ADW_WRITE_WORD_LRAM(iot, ioh, ADW_MC_PPR_ABLE,
                                                sc->ppr_able);
                        }
                }

                /*
                 * If the EEPROM enabled Tag Queuing for the device and the
                 * device supports Tag Queueing, then turn on the device's
                 * 'tagqng_enable' bit in the microcode and set the microcode
                 * maximum command count to the ADV_DVC_VAR 'max_dvc_qng'
                 * value.
                 *
                 * Tag Queuing is disabled for the BIOS which runs in polled
                 * mode and would see no benefit from Tag Queuing. Also by
                 * disabling Tag Queuing in the BIOS devices with Tag Queuing
                 * bugs will at least work with the BIOS.
                 */
#ifdef SCSI_ADW_TAGQ_DISABLE
        if(!(tidmask & SCSI_ADW_TAGQ_DISABLE))
#endif /* SCSI_ADW_TAGQ_DISABLE */
                if ((sc->tagqng_able & tidmask) && (inq->flags3 & SID_CmdQue)) {
                        ADW_READ_WORD_LRAM(iot, ioh, ADW_MC_TAGQNG_ABLE,
                                        cfg_word);
                        cfg_word |= tidmask;
                        ADW_WRITE_WORD_LRAM(iot, ioh, ADW_MC_TAGQNG_ABLE,
                                        cfg_word);

                        ADW_WRITE_BYTE_LRAM(iot, ioh,
                                        ADW_MC_NUMBER_OF_MAX_CMD + tid,
                                        sc->max_dvc_qng);
                }
        }
#endif /* FAILSAFE */
}


static void
AdwSleepMilliSecond(u_int32_t n)
{

        DELAY(n * 1000);
}


static void
AdwDelayMicroSecond(u_int32_t n)
{

        DELAY(n);
}