Sync usage with man page.

[netbsd-mini2440.git] / sys / dev / ic / elink3.c

/*      $NetBSD: elink3.c,v 1.128 2009/09/05 12:30:59 tsutsui Exp $     */

/*-
 * Copyright (c) 1998, 2001 The NetBSD Foundation, Inc.
 * All rights reserved.
 *
 * This code is derived from software contributed to The NetBSD Foundation
 * by Jason R. Thorpe of the Numerical Aerospace Simulation Facility,
 * NASA Ames Research Center.
 *
 * Redistribution and use in source and binary forms, with or without
 * modification, are permitted provided that the following conditions
 * are met:
 * 1. Redistributions of source code must retain the above copyright
 *    notice, this list of conditions and the following disclaimer.
 * 2. Redistributions in binary form must reproduce the above copyright
 *    notice, this list of conditions and the following disclaimer in the
 *    documentation and/or other materials provided with the distribution.
 *
 * THIS SOFTWARE IS PROVIDED BY THE NETBSD FOUNDATION, INC. AND CONTRIBUTORS
 * ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED
 * TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
 * PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS
 * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
 * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
 * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
 * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
 * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
 * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
 * POSSIBILITY OF SUCH DAMAGE.
 */

/*
 * Copyright (c) 1996, 1997 Jonathan Stone <jonathan@NetBSD.org>
 * Copyright (c) 1994 Herb Peyerl <hpeyerl@beer.org>
 * All rights reserved.
 *
 * Redistribution and use in source and binary forms, with or without
 * modification, are permitted provided that the following conditions
 * are met:
 * 1. Redistributions of source code must retain the above copyright
 *    notice, this list of conditions and the following disclaimer.
 * 2. Redistributions in binary form must reproduce the above copyright
 *    notice, this list of conditions and the following disclaimer in the
 *    documentation and/or other materials provided with the distribution.
 * 3. All advertising materials mentioning features or use of this software
 *    must display the following acknowledgement:
 *      This product includes software developed by Herb Peyerl.
 * 4. The name of Herb Peyerl may not be used to endorse or promote products
 *    derived from this software without specific prior written permission.
 *
 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
 * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
 * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
 * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
 * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
 * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
 * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
 * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
 * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
 * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
 */

#include <sys/cdefs.h>
__KERNEL_RCSID(0, "$NetBSD: elink3.c,v 1.128 2009/09/05 12:30:59 tsutsui Exp $");

#include "opt_inet.h"
#include "bpfilter.h"
#include "rnd.h"

#include <sys/param.h>
#include <sys/systm.h>
#include <sys/callout.h>
#include <sys/kernel.h>
#include <sys/mbuf.h>
#include <sys/socket.h>
#include <sys/ioctl.h>
#include <sys/errno.h>
#include <sys/syslog.h>
#include <sys/select.h>
#include <sys/device.h>
#if NRND > 0
#include <sys/rnd.h>
#endif

#include <net/if.h>
#include <net/if_dl.h>
#include <net/if_ether.h>
#include <net/if_media.h>

#if NBPFILTER > 0
#include <net/bpf.h>
#include <net/bpfdesc.h>
#endif

#include <sys/cpu.h>
#include <sys/bus.h>
#include <sys/intr.h>

#include <dev/mii/mii.h>
#include <dev/mii/miivar.h>
#include <dev/mii/mii_bitbang.h>

#include <dev/ic/elink3var.h>
#include <dev/ic/elink3reg.h>

#ifdef DEBUG
int epdebug = 0;
#endif

/*
 * XXX endian workaround for big-endian CPUs  with pcmcia:
 * if stream methods for bus_space_multi are not provided, define them
 * using non-stream bus_space_{read,write}_multi_.
 * Assumes host CPU is same endian-ness as bus.
 */
#ifndef __BUS_SPACE_HAS_STREAM_METHODS
#define bus_space_read_multi_stream_2   bus_space_read_multi_2
#define bus_space_read_multi_stream_4   bus_space_read_multi_4
#define bus_space_write_multi_stream_2  bus_space_write_multi_2
#define bus_space_write_multi_stream_4  bus_space_write_multi_4
#endif /* __BUS_SPACE_HAS_STREAM_METHODS */

/*
 * Structure to map media-present bits in boards to ifmedia codes and
 * printable media names. Used for table-driven ifmedia initialization.
 */
struct ep_media {
        int     epm_mpbit;              /* media present bit */
        const char *epm_name;           /* name of medium */
        int     epm_ifmedia;            /* ifmedia word for medium */
        int     epm_epmedia;            /* ELINKMEDIA_* constant */
};

/*
 * Media table for the Demon/Vortex/Boomerang chipsets.
 *
 * Note that MII on the Demon and Vortex (3c59x) indicates an external
 * MII connector (for connecting an external PHY) ... I think.  Treat
 * it as `manual' on these chips.
 *
 * Any Boomerang (3c90x) chips with MII really do have an internal
 * MII and real PHYs attached; no `native' media.
 */
const struct ep_media ep_vortex_media[] = {
        { ELINK_PCI_10BASE_T,   "10baseT",      IFM_ETHER|IFM_10_T,
          ELINKMEDIA_10BASE_T },
        { ELINK_PCI_10BASE_T,   "10baseT-FDX",  IFM_ETHER|IFM_10_T|IFM_FDX,
          ELINKMEDIA_10BASE_T },
        { ELINK_PCI_AUI,        "10base5",      IFM_ETHER|IFM_10_5,
          ELINKMEDIA_AUI },
        { ELINK_PCI_BNC,        "10base2",      IFM_ETHER|IFM_10_2,
          ELINKMEDIA_10BASE_2 },
        { ELINK_PCI_100BASE_TX, "100baseTX",    IFM_ETHER|IFM_100_TX,
          ELINKMEDIA_100BASE_TX },
        { ELINK_PCI_100BASE_TX, "100baseTX-FDX",IFM_ETHER|IFM_100_TX|IFM_FDX,
          ELINKMEDIA_100BASE_TX },
        { ELINK_PCI_100BASE_FX, "100baseFX",    IFM_ETHER|IFM_100_FX,
          ELINKMEDIA_100BASE_FX },
        { ELINK_PCI_100BASE_MII,"manual",       IFM_ETHER|IFM_MANUAL,
          ELINKMEDIA_MII },
        { ELINK_PCI_100BASE_T4, "100baseT4",    IFM_ETHER|IFM_100_T4,
          ELINKMEDIA_100BASE_T4 },
        { 0,                    NULL,           0,
          0 },
};

/*
 * Media table for the older 3Com Etherlink III chipset, used
 * in the 3c509, 3c579, and 3c589.
 */
const struct ep_media ep_509_media[] = {
        { ELINK_W0_CC_UTP,      "10baseT",      IFM_ETHER|IFM_10_T,
          ELINKMEDIA_10BASE_T },
        { ELINK_W0_CC_AUI,      "10base5",      IFM_ETHER|IFM_10_5,
          ELINKMEDIA_AUI },
        { ELINK_W0_CC_BNC,      "10base2",      IFM_ETHER|IFM_10_2,
          ELINKMEDIA_10BASE_2 },
        { 0,                    NULL,           0,
          0 },
};

void    ep_internalconfig(struct ep_softc *sc);
void    ep_vortex_probemedia(struct ep_softc *sc);
void    ep_509_probemedia(struct ep_softc *sc);

static void eptxstat(struct ep_softc *);
static int epstatus(struct ep_softc *);
int     epinit(struct ifnet *);
void    epstop(struct ifnet *, int);
int     epioctl(struct ifnet *, u_long, void *);
void    epstart(struct ifnet *);
void    epwatchdog(struct ifnet *);
void    epreset(struct ep_softc *);
static bool epshutdown(device_t, int);
void    epread(struct ep_softc *);
struct mbuf *epget(struct ep_softc *, int);
void    epmbuffill(void *);
void    epmbufempty(struct ep_softc *);
void    epsetfilter(struct ep_softc *);
void    ep_roadrunner_mii_enable(struct ep_softc *);
void    epsetmedia(struct ep_softc *);

/* ifmedia callbacks */
int     ep_media_change(struct ifnet *ifp);
void    ep_media_status(struct ifnet *ifp, struct ifmediareq *req);

/* MII callbacks */
int     ep_mii_readreg(device_t, int, int);
void    ep_mii_writereg(device_t, int, int, int);
void    ep_statchg(device_t);

void    ep_tick(void *);

static int epbusyeeprom(struct ep_softc *);
u_int16_t ep_read_eeprom(struct ep_softc *, u_int16_t);
static inline void ep_reset_cmd(struct ep_softc *sc, u_int cmd, u_int arg);
static inline void ep_finish_reset(bus_space_tag_t, bus_space_handle_t);
static inline void ep_discard_rxtop(bus_space_tag_t, bus_space_handle_t);
static inline int ep_w1_reg(struct ep_softc *, int);

/*
 * MII bit-bang glue.
 */
u_int32_t ep_mii_bitbang_read(device_t);
void ep_mii_bitbang_write(device_t, u_int32_t);

const struct mii_bitbang_ops ep_mii_bitbang_ops = {
        ep_mii_bitbang_read,
        ep_mii_bitbang_write,
        {
                PHYSMGMT_DATA,          /* MII_BIT_MDO */
                PHYSMGMT_DATA,          /* MII_BIT_MDI */
                PHYSMGMT_CLK,           /* MII_BIT_MDC */
                PHYSMGMT_DIR,           /* MII_BIT_DIR_HOST_PHY */
                0,                      /* MII_BIT_DIR_PHY_HOST */
        }
};

/*
 * Some chips (3c515 [Corkscrew] and 3c574 [RoadRunner]) have
 * Window 1 registers offset!
 */
static inline int
ep_w1_reg(struct ep_softc *sc, int reg)
{

        switch (sc->ep_chipset) {
        case ELINK_CHIPSET_CORKSCREW:
                return (reg + 0x10);

        case ELINK_CHIPSET_ROADRUNNER:
                switch (reg) {
                case ELINK_W1_FREE_TX:
                case ELINK_W1_RUNNER_RDCTL:
                case ELINK_W1_RUNNER_WRCTL:
                        return (reg);
                }
                return (reg + 0x10);
        }

        return (reg);
}

/*
 * Wait for any pending reset to complete.
 * On newer hardware we could poll SC_COMMAND_IN_PROGRESS,
 * but older hardware doesn't implement it and we must delay.
 */
static inline void
ep_finish_reset(bus_space_tag_t iot, bus_space_handle_t ioh)
{
        int i;

        for (i = 0; i < 10000; i++) {
                if ((bus_space_read_2(iot, ioh, ELINK_STATUS) &
                    COMMAND_IN_PROGRESS) == 0)
                        break;
                DELAY(10);
        }
}

/*
 * Issue a (reset) command, and be sure it has completed.
 * Used for global reset, TX_RESET, RX_RESET.
 */
static inline void
ep_reset_cmd(struct ep_softc *sc, u_int cmd, u_int arg)
{
        bus_space_tag_t iot = sc->sc_iot;
        bus_space_handle_t ioh = sc->sc_ioh;

        bus_space_write_2(iot, ioh, cmd, arg);
        ep_finish_reset(iot, ioh);
}


static inline void
ep_discard_rxtop(bus_space_tag_t iot, bus_space_handle_t ioh)
{
        int i;

        bus_space_write_2(iot, ioh, ELINK_COMMAND, RX_DISCARD_TOP_PACK);

        /*
         * Spin for about 1 msec, to avoid forcing a DELAY() between
         * every received packet (adding latency and  limiting pkt-recv rate).
         * On PCI, at 4 30-nsec PCI bus cycles for a read, 8000 iterations
         * is about right.
         */
        for (i = 0; i < 8000; i++) {
                if ((bus_space_read_2(iot, ioh, ELINK_STATUS) &
                    COMMAND_IN_PROGRESS) == 0)
                    return;
        }

        /*  Didn't complete in a hurry. Do DELAY()s. */
        ep_finish_reset(iot, ioh);
}

/*
 * Back-end attach and configure.
 */
int
epconfig(struct ep_softc *sc, u_short chipset, u_int8_t *enaddr)
{
        struct ifnet *ifp = &sc->sc_ethercom.ec_if;
        bus_space_tag_t iot = sc->sc_iot;
        bus_space_handle_t ioh = sc->sc_ioh;
        u_int16_t i;
        u_int8_t myla[ETHER_ADDR_LEN];

        callout_init(&sc->sc_mii_callout, 0);
        callout_init(&sc->sc_mbuf_callout, 0);

        sc->ep_chipset = chipset;

        /*
         * We could have been groveling around in other register
         * windows in the front-end; make sure we're in window 0
         * to read the EEPROM.
         */
        GO_WINDOW(0);

        if (enaddr == NULL) {
                /*
                 * Read the station address from the eeprom.
                 */
                for (i = 0; i < ETHER_ADDR_LEN / 2; i++) {
                        u_int16_t x = ep_read_eeprom(sc, i);
                        myla[(i << 1)] = x >> 8;
                        myla[(i << 1) + 1] = x;
                }
                enaddr = myla;
        }

        /*
         * Vortex-based (3c59x pci,eisa) and Boomerang (3c900) cards
         * allow FDDI-sized (4500) byte packets.  Commands only take an
         * 11-bit parameter, and  11 bits isn't enough to hold a full-size
         * packet length.
         * Commands to these cards implicitly upshift a packet size
         * or threshold by 2 bits.
         * To detect  cards with large-packet support, we probe by setting
         * the transmit threshold register, then change windows and
         * read back the threshold register directly, and see if the
         * threshold value was shifted or not.
         */
        bus_space_write_2(iot, ioh, ELINK_COMMAND,
            SET_TX_AVAIL_THRESH | ELINK_LARGEWIN_PROBE);
        GO_WINDOW(5);
        i = bus_space_read_2(iot, ioh, ELINK_W5_TX_AVAIL_THRESH);
        GO_WINDOW(1);
        switch (i)  {
        case ELINK_LARGEWIN_PROBE:
        case (ELINK_LARGEWIN_PROBE & ELINK_LARGEWIN_MASK):
                sc->ep_pktlenshift = 0;
                break;

        case (ELINK_LARGEWIN_PROBE << 2):
                sc->ep_pktlenshift = 2;
                break;

        default:
                aprint_error_dev(sc->sc_dev,
                    "wrote 0x%x to TX_AVAIL_THRESH, read back 0x%x. "
                    "Interface disabled\n",
                    ELINK_LARGEWIN_PROBE, (int) i);
                return (1);
        }

        /*
         * Ensure Tx-available interrupts are enabled for
         * start the interface.
         * XXX should be in epinit()?
         */
        bus_space_write_2(iot, ioh, ELINK_COMMAND,
            SET_TX_AVAIL_THRESH | (1600 >> sc->ep_pktlenshift));

        strlcpy(ifp->if_xname, device_xname(sc->sc_dev), IFNAMSIZ);
        ifp->if_softc = sc;
        ifp->if_start = epstart;
        ifp->if_ioctl = epioctl;
        ifp->if_watchdog = epwatchdog;
        ifp->if_init = epinit;
        ifp->if_stop = epstop;
        ifp->if_flags =
            IFF_BROADCAST | IFF_SIMPLEX | IFF_NOTRAILERS | IFF_MULTICAST;
        IFQ_SET_READY(&ifp->if_snd);

        if_attach(ifp);
        ether_ifattach(ifp, enaddr);

        /*
         * Finish configuration:
         * determine chipset if the front-end couldn't do so,
         * show board details, set media.
         */

        /*
         * Print RAM size.  We also print the Ethernet address in here.
         * It's extracted from the ifp, so we have to make sure it's
         * been attached first.
         */
        ep_internalconfig(sc);
        GO_WINDOW(0);

        /*
         * Display some additional information, if pertinent.
         */
        if (sc->ep_flags & ELINK_FLAGS_USEFIFOBUFFER)
                aprint_normal_dev(sc->sc_dev, "RoadRunner FIFO buffer enabled\n");

        /*
         * Initialize our media structures and MII info.  We'll
         * probe the MII if we discover that we have one.
         */
        sc->sc_mii.mii_ifp = ifp;
        sc->sc_mii.mii_readreg = ep_mii_readreg;
        sc->sc_mii.mii_writereg = ep_mii_writereg;
        sc->sc_mii.mii_statchg = ep_statchg;
        ifmedia_init(&sc->sc_mii.mii_media, IFM_IMASK, ep_media_change,
            ep_media_status);

        /*
         * All CORKSCREW chips have MII.
         */
        if (sc->ep_chipset == ELINK_CHIPSET_CORKSCREW)
                sc->ep_flags |= ELINK_FLAGS_MII;

        /*
         * Now, determine which media we have.
         */
        switch (sc->ep_chipset) {
        case ELINK_CHIPSET_ROADRUNNER:
                if (sc->ep_flags & ELINK_FLAGS_MII) {
                        ep_roadrunner_mii_enable(sc);
                        GO_WINDOW(0);
                }
                /* FALLTHROUGH */

        case ELINK_CHIPSET_CORKSCREW:
        case ELINK_CHIPSET_BOOMERANG:
                /*
                 * If the device has MII, probe it.  We won't be using
                 * any `native' media in this case, only PHYs.  If
                 * we don't, just treat the Boomerang like the Vortex.
                 */
                if (sc->ep_flags & ELINK_FLAGS_MII) {
                        mii_attach(sc->sc_dev, &sc->sc_mii, 0xffffffff,
                            MII_PHY_ANY, MII_OFFSET_ANY, 0);
                        if (LIST_FIRST(&sc->sc_mii.mii_phys) == NULL) {
                                ifmedia_add(&sc->sc_mii.mii_media,
                                    IFM_ETHER|IFM_NONE, 0, NULL);
                                ifmedia_set(&sc->sc_mii.mii_media,
                                    IFM_ETHER|IFM_NONE);
                        } else {
                                ifmedia_set(&sc->sc_mii.mii_media,
                                    IFM_ETHER|IFM_AUTO);
                        }
                        break;
                }
                /* FALLTHROUGH */

        case ELINK_CHIPSET_VORTEX:
                ep_vortex_probemedia(sc);
                break;

        default:
                ep_509_probemedia(sc);
                break;
        }

        GO_WINDOW(1);           /* Window 1 is operating window */

#if NRND > 0
        rnd_attach_source(&sc->rnd_source, device_xname(sc->sc_dev),
            RND_TYPE_NET, 0);
#endif

        sc->tx_start_thresh = 20;       /* probably a good starting point. */

        /*  Establish callback to reset card when we reboot. */
        if (pmf_device_register1(sc->sc_dev, NULL, NULL, epshutdown))
                pmf_class_network_register(sc->sc_dev, ifp);
        else
                aprint_error_dev(sc->sc_dev,
                    "couldn't establish power handler\n");

        ep_reset_cmd(sc, ELINK_COMMAND, RX_RESET);
        ep_reset_cmd(sc, ELINK_COMMAND, TX_RESET);

        /* The attach is successful. */
        sc->sc_flags |= ELINK_FLAGS_ATTACHED;
        return (0);
}


/*
 * Show interface-model-independent info from window 3
 * internal-configuration register.
 */
void
ep_internalconfig(struct ep_softc *sc)
{
        bus_space_tag_t iot = sc->sc_iot;
        bus_space_handle_t ioh = sc->sc_ioh;

        u_int config0;
        u_int config1;

        int  ram_size, ram_width, ram_split;
        /*
         * NVRAM buffer Rx:Tx config names for busmastering cards
         * (Demon, Vortex, and later).
         */
        const char *const onboard_ram_config[] = {
                "5:3", "3:1", "1:1", "3:5" };

        GO_WINDOW(3);
        config0 = (u_int)bus_space_read_2(iot, ioh, ELINK_W3_INTERNAL_CONFIG);
        config1 = (u_int)bus_space_read_2(iot, ioh,
            ELINK_W3_INTERNAL_CONFIG + 2);
        GO_WINDOW(0);

        ram_size  = (config0 & CONFIG_RAMSIZE) >> CONFIG_RAMSIZE_SHIFT;
        ram_width = (config0 & CONFIG_RAMWIDTH) >> CONFIG_RAMWIDTH_SHIFT;

        ram_split  = (config1 & CONFIG_RAMSPLIT) >> CONFIG_RAMSPLIT_SHIFT;

        aprint_normal_dev(sc->sc_dev, "address %s, %dKB %s-wide FIFO, %s Rx:Tx split\n",
               ether_sprintf(CLLADDR(sc->sc_ethercom.ec_if.if_sadl)),
               8 << ram_size,
               (ram_width) ? "word" : "byte",
               onboard_ram_config[ram_split]);
}


/*
 * Find supported media on 3c509-generation hardware that doesn't have
 * a "reset_options" register in window 3.
 * Use the config_cntrl register  in window 0 instead.
 * Used on original, 10Mbit ISA (3c509), 3c509B, and pre-Demon EISA cards
 * that implement  CONFIG_CTRL.  We don't have a good way to set the
 * default active medium; punt to ifconfig  instead.
 */
void
ep_509_probemedia(struct ep_softc *sc)
{
        bus_space_tag_t iot = sc->sc_iot;
        bus_space_handle_t ioh = sc->sc_ioh;
        struct ifmedia *ifm = &sc->sc_mii.mii_media;
        u_int16_t ep_w0_config, port;
        const struct ep_media *epm;
        const char *sep = "", *defmedianame = NULL;
        int defmedia = 0;

        GO_WINDOW(0);
        ep_w0_config = bus_space_read_2(iot, ioh, ELINK_W0_CONFIG_CTRL);

        aprint_normal_dev(sc->sc_dev, "");

        /* Sanity check that there are any media! */
        if ((ep_w0_config & ELINK_W0_CC_MEDIAMASK) == 0) {
                aprint_error("no media present!\n");
                ifmedia_add(ifm, IFM_ETHER|IFM_NONE, 0, NULL);
                ifmedia_set(ifm, IFM_ETHER|IFM_NONE);
                return;
        }

        /*
         * Get the default media from the EEPROM.
         */
        port = ep_read_eeprom(sc, EEPROM_ADDR_CFG) >> 14;

#define PRINT(str)      aprint_normal("%s%s", sep, str); sep = ", "

        for (epm = ep_509_media; epm->epm_name != NULL; epm++) {
                if (ep_w0_config & epm->epm_mpbit) {
                        /*
                         * This simple test works because 509 chipsets
                         * don't do full-duplex.
                         */
                        if (epm->epm_epmedia == port || defmedia == 0) {
                                defmedia = epm->epm_ifmedia;
                                defmedianame = epm->epm_name;
                        }
                        ifmedia_add(ifm, epm->epm_ifmedia, epm->epm_epmedia,
                            NULL);
                        PRINT(epm->epm_name);
                }
        }

#undef PRINT

#ifdef DIAGNOSTIC
        if (defmedia == 0)
                panic("ep_509_probemedia: impossible");
#endif

        aprint_normal(" (default %s)\n", defmedianame);
        ifmedia_set(ifm, defmedia);
}

/*
 * Find media present on large-packet-capable elink3 devices.
 * Show onboard configuration of large-packet-capable elink3 devices
 * (Demon, Vortex, Boomerang), which do not implement CONFIG_CTRL in window 0.
 * Use media and card-version info in window 3 instead.
 */
void
ep_vortex_probemedia(struct ep_softc *sc)
{
        bus_space_tag_t iot = sc->sc_iot;
        bus_space_handle_t ioh = sc->sc_ioh;
        struct ifmedia *ifm = &sc->sc_mii.mii_media;
        const struct ep_media *epm;
        u_int config1;
        int reset_options;
        int default_media;      /* 3-bit encoding of default (EEPROM) media */
        int defmedia = 0;
        const char *sep = "", *defmedianame = NULL;

        GO_WINDOW(3);
        config1 = (u_int)bus_space_read_2(iot, ioh,
            ELINK_W3_INTERNAL_CONFIG + 2);
        reset_options = (int)bus_space_read_2(iot, ioh, ELINK_W3_RESET_OPTIONS);
        GO_WINDOW(0);

        default_media = (config1 & CONFIG_MEDIAMASK) >> CONFIG_MEDIAMASK_SHIFT;

        aprint_normal_dev(sc->sc_dev, "");

        /* Sanity check that there are any media! */
        if ((reset_options & ELINK_PCI_MEDIAMASK) == 0) {
                aprint_error("no media present!\n");
                ifmedia_add(ifm, IFM_ETHER|IFM_NONE, 0, NULL);
                ifmedia_set(ifm, IFM_ETHER|IFM_NONE);
                return;
        }

#define PRINT(str)      aprint_normal("%s%s", sep, str); sep = ", "

        for (epm = ep_vortex_media; epm->epm_name != NULL; epm++) {
                if (reset_options & epm->epm_mpbit) {
                        /*
                         * Default media is a little more complicated
                         * on the Vortex.  We support full-duplex which
                         * uses the same reset options bit.
                         *
                         * XXX Check EEPROM for default to FDX?
                         */
                        if (epm->epm_epmedia == default_media) {
                                if ((epm->epm_ifmedia & IFM_FDX) == 0) {
                                        defmedia = epm->epm_ifmedia;
                                        defmedianame = epm->epm_name;
                                }
                        } else if (defmedia == 0) {
                                defmedia = epm->epm_ifmedia;
                                defmedianame = epm->epm_name;
                        }
                        ifmedia_add(ifm, epm->epm_ifmedia, epm->epm_epmedia,
                            NULL);
                        PRINT(epm->epm_name);
                }
        }

#undef PRINT

#ifdef DIAGNOSTIC
        if (defmedia == 0)
                panic("ep_vortex_probemedia: impossible");
#endif

        aprint_normal(" (default %s)\n", defmedianame);
        ifmedia_set(ifm, defmedia);
}

/*
 * One second timer, used to tick the MII.
 */
void
ep_tick(void *arg)
{
        struct ep_softc *sc = arg;
        int s;

#ifdef DIAGNOSTIC
        if ((sc->ep_flags & ELINK_FLAGS_MII) == 0)
                panic("ep_tick");
#endif

        if (!device_is_active(sc->sc_dev))
                return;

        s = splnet();
        mii_tick(&sc->sc_mii);
        splx(s);

        callout_reset(&sc->sc_mii_callout, hz, ep_tick, sc);
}

/*
 * Bring device up.
 *
 * The order in here seems important. Otherwise we may not receive
 * interrupts. ?!
 */
int
epinit(struct ifnet *ifp)
{
        struct ep_softc *sc = ifp->if_softc;
        bus_space_tag_t iot = sc->sc_iot;
        bus_space_handle_t ioh = sc->sc_ioh;
        int i, error;
        const u_int8_t *addr;

        if (!sc->enabled && (error = epenable(sc)) != 0)
                return (error);

        /* Make sure any pending reset has completed before touching board */
        ep_finish_reset(iot, ioh);

        /*
         * Cancel any pending I/O.
         */
        epstop(ifp, 0);

        if (sc->bustype != ELINK_BUS_PCI && sc->bustype != ELINK_BUS_EISA
            && sc->bustype != ELINK_BUS_MCA) {
                GO_WINDOW(0);
                bus_space_write_2(iot, ioh, ELINK_W0_CONFIG_CTRL, 0);
                bus_space_write_2(iot, ioh, ELINK_W0_CONFIG_CTRL,
                    ENABLE_DRQ_IRQ);
        }

        if (sc->bustype == ELINK_BUS_PCMCIA) {
                bus_space_write_2(iot, ioh, ELINK_W0_RESOURCE_CFG, 0x3f00);
        }

        GO_WINDOW(2);
        /* Reload the ether_addr. */
        addr = CLLADDR(ifp->if_sadl);
        for (i = 0; i < 6; i += 2)
                bus_space_write_2(iot, ioh, ELINK_W2_ADDR_0 + i,
                    (addr[i] << 0) | (addr[i + 1] << 8));

        /*
         * Reset the station-address receive filter.
         * A bug workaround for busmastering (Vortex, Demon) cards.
         */
        for (i = 0; i < 6; i += 2)
                bus_space_write_2(iot, ioh, ELINK_W2_RECVMASK_0 + i, 0);

        ep_reset_cmd(sc, ELINK_COMMAND, RX_RESET);
        ep_reset_cmd(sc, ELINK_COMMAND, TX_RESET);

        GO_WINDOW(1);           /* Window 1 is operating window */
        for (i = 0; i < 31; i++)
                (void)bus_space_read_2(iot, ioh,
                                       ep_w1_reg(sc, ELINK_W1_TX_STATUS));

        /* Set threshold for Tx-space available interrupt. */
        bus_space_write_2(iot, ioh, ELINK_COMMAND,
            SET_TX_AVAIL_THRESH | (1600 >> sc->ep_pktlenshift));

        if (sc->ep_chipset == ELINK_CHIPSET_ROADRUNNER) {
                /*
                 * Enable options in the PCMCIA LAN COR register, via
                 * RoadRunner Window 1.
                 *
                 * XXX MAGIC CONSTANTS!
                 */
                u_int16_t cor;

                bus_space_write_2(iot, ioh, ELINK_W1_RUNNER_RDCTL, (1 << 11));

                cor = bus_space_read_2(iot, ioh, 0) & ~0x30;
                if (sc->ep_flags & ELINK_FLAGS_USESHAREDMEM)
                        cor |= 0x10;
                if (sc->ep_flags & ELINK_FLAGS_FORCENOWAIT)
                        cor |= 0x20;
                bus_space_write_2(iot, ioh, 0, cor);

                bus_space_write_2(iot, ioh, ELINK_W1_RUNNER_WRCTL, 0);
                bus_space_write_2(iot, ioh, ELINK_W1_RUNNER_RDCTL, 0);

                if (sc->ep_flags & ELINK_FLAGS_MII) {
                        ep_roadrunner_mii_enable(sc);
                        GO_WINDOW(1);
                }
        }

        /* Enable interrupts. */
        bus_space_write_2(iot, ioh, ELINK_COMMAND,
            SET_RD_0_MASK | WATCHED_INTERRUPTS);
        bus_space_write_2(iot, ioh, ELINK_COMMAND,
            SET_INTR_MASK | WATCHED_INTERRUPTS);

        /*
         * Attempt to get rid of any stray interrupts that occurred during
         * configuration.  On the i386 this isn't possible because one may
         * already be queued.  However, a single stray interrupt is
         * unimportant.
         */
        bus_space_write_2(iot, ioh, ELINK_COMMAND, ACK_INTR | 0xff);

        epsetfilter(sc);
        epsetmedia(sc);

        bus_space_write_2(iot, ioh, ELINK_COMMAND, RX_ENABLE);
        bus_space_write_2(iot, ioh, ELINK_COMMAND, TX_ENABLE);

        epmbuffill(sc);

        /* Interface is now `running', with no output active. */
        ifp->if_flags |= IFF_RUNNING;
        ifp->if_flags &= ~IFF_OACTIVE;

        if (sc->ep_flags & ELINK_FLAGS_MII) {
                /* Start the one second clock. */
                callout_reset(&sc->sc_mii_callout, hz, ep_tick, sc);
        }

        /* Attempt to start output, if any. */
        epstart(ifp);

        return (0);
}


/*
 * Set multicast receive filter.
 * elink3 hardware has no selective multicast filter in hardware.
 * Enable reception of all multicasts and filter in software.
 */
void
epsetfilter(struct ep_softc *sc)
{
        struct ifnet *ifp = &sc->sc_ethercom.ec_if;

        GO_WINDOW(1);           /* Window 1 is operating window */
        bus_space_write_2(sc->sc_iot, sc->sc_ioh, ELINK_COMMAND,
            SET_RX_FILTER | FIL_INDIVIDUAL | FIL_BRDCST |
            ((ifp->if_flags & IFF_MULTICAST) ? FIL_MULTICAST : 0) |
            ((ifp->if_flags & IFF_PROMISC) ? FIL_PROMISC : 0));
}

int
ep_media_change(struct ifnet *ifp)
{
        struct ep_softc *sc = ifp->if_softc;

        if (sc->enabled && (ifp->if_flags & IFF_UP) != 0)
                epreset(sc);

        return (0);
}

/*
 * Reset and enable the MII on the RoadRunner.
 */
void
ep_roadrunner_mii_enable(struct ep_softc *sc)
{
        bus_space_tag_t iot = sc->sc_iot;
        bus_space_handle_t ioh = sc->sc_ioh;

        GO_WINDOW(3);
        bus_space_write_2(iot, ioh, ELINK_W3_RESET_OPTIONS,
            ELINK_PCI_100BASE_MII|ELINK_RUNNER_ENABLE_MII);
        delay(1000);
        bus_space_write_2(iot, ioh, ELINK_W3_RESET_OPTIONS,
            ELINK_PCI_100BASE_MII|ELINK_RUNNER_MII_RESET|
            ELINK_RUNNER_ENABLE_MII);
        ep_reset_cmd(sc, ELINK_COMMAND, TX_RESET);
        ep_reset_cmd(sc, ELINK_COMMAND, RX_RESET);
        delay(1000);
        bus_space_write_2(iot, ioh, ELINK_W3_RESET_OPTIONS,
            ELINK_PCI_100BASE_MII|ELINK_RUNNER_ENABLE_MII);
}

/*
 * Set the card to use the specified media.
 */
void
epsetmedia(struct ep_softc *sc)
{
        bus_space_tag_t iot = sc->sc_iot;
        bus_space_handle_t ioh = sc->sc_ioh;

        /* Turn everything off.  First turn off linkbeat and UTP. */
        GO_WINDOW(4);
        bus_space_write_2(iot, ioh, ELINK_W4_MEDIA_TYPE, 0x0);

        /* Turn off coax */
        bus_space_write_2(iot, ioh, ELINK_COMMAND, STOP_TRANSCEIVER);
        delay(1000);

        /*
         * If the device has MII, select it, and then tell the
         * PHY which media to use.
         */
        if (sc->ep_flags & ELINK_FLAGS_MII) {
                int config0, config1;

                GO_WINDOW(3);

                if (sc->ep_chipset == ELINK_CHIPSET_ROADRUNNER) {
                        int resopt;

                        resopt = bus_space_read_2(iot, ioh,
                            ELINK_W3_RESET_OPTIONS);
                        bus_space_write_2(iot, ioh, ELINK_W3_RESET_OPTIONS,
                            resopt | ELINK_RUNNER_ENABLE_MII);
                }

                config0 = (u_int)bus_space_read_2(iot, ioh,
                    ELINK_W3_INTERNAL_CONFIG);
                config1 = (u_int)bus_space_read_2(iot, ioh,
                    ELINK_W3_INTERNAL_CONFIG + 2);

                config1 = config1 & ~CONFIG_MEDIAMASK;
                config1 |= (ELINKMEDIA_MII << CONFIG_MEDIAMASK_SHIFT);

                bus_space_write_2(iot, ioh, ELINK_W3_INTERNAL_CONFIG, config0);
                bus_space_write_2(iot, ioh, ELINK_W3_INTERNAL_CONFIG + 2,
                    config1);
                GO_WINDOW(1);   /* back to operating window */

                mii_mediachg(&sc->sc_mii);
                return;
        }

        /*
         * Now turn on the selected media/transceiver.
         */
        GO_WINDOW(4);
        switch (IFM_SUBTYPE(sc->sc_mii.mii_media.ifm_cur->ifm_media)) {
        case IFM_10_T:
                bus_space_write_2(iot, ioh, ELINK_W4_MEDIA_TYPE,
                    JABBER_GUARD_ENABLE|LINKBEAT_ENABLE);
                break;

        case IFM_10_2:
                bus_space_write_2(iot, ioh, ELINK_COMMAND, START_TRANSCEIVER);
                DELAY(1000);    /* 50ms not enmough? */
                break;

        case IFM_100_TX:
        case IFM_100_FX:
        case IFM_100_T4:                /* XXX check documentation */
                bus_space_write_2(iot, ioh, ELINK_W4_MEDIA_TYPE,
                    LINKBEAT_ENABLE);
                DELAY(1000);    /* not strictly necessary? */
                break;

        case IFM_10_5:
                bus_space_write_2(iot, ioh, ELINK_W4_MEDIA_TYPE,
                    SQE_ENABLE);
                DELAY(1000);    /* not strictly necessary? */
                break;

        case IFM_MANUAL:
                /*
                 * Nothing to do here; we are actually enabling the
                 * external PHY on the MII port.
                 */
                break;

        case IFM_NONE:
                printf("%s: interface disabled\n", device_xname(sc->sc_dev));
                return;

        default:
                panic("epsetmedia: impossible");
        }

        /*
         * Tell the chip which port to use.
         */
        switch (sc->ep_chipset) {
        case ELINK_CHIPSET_VORTEX:
        case ELINK_CHIPSET_BOOMERANG:
            {
                int mctl, config0, config1;

                GO_WINDOW(3);
                config0 = (u_int)bus_space_read_2(iot, ioh,
                    ELINK_W3_INTERNAL_CONFIG);
                config1 = (u_int)bus_space_read_2(iot, ioh,
                    ELINK_W3_INTERNAL_CONFIG + 2);

                config1 = config1 & ~CONFIG_MEDIAMASK;
                config1 |= (sc->sc_mii.mii_media.ifm_cur->ifm_data <<
                    CONFIG_MEDIAMASK_SHIFT);

                bus_space_write_2(iot, ioh, ELINK_W3_INTERNAL_CONFIG, config0);
                bus_space_write_2(iot, ioh, ELINK_W3_INTERNAL_CONFIG + 2,
                    config1);

                mctl = bus_space_read_2(iot, ioh, ELINK_W3_MAC_CONTROL);
                if (sc->sc_mii.mii_media.ifm_cur->ifm_media & IFM_FDX)
                        mctl |= MAC_CONTROL_FDX;
                else
                        mctl &= ~MAC_CONTROL_FDX;
                bus_space_write_2(iot, ioh, ELINK_W3_MAC_CONTROL, mctl);
                break;
            }
        default:
            {
                int w0_addr_cfg;

                GO_WINDOW(0);
                w0_addr_cfg = bus_space_read_2(iot, ioh, ELINK_W0_ADDRESS_CFG);
                w0_addr_cfg &= 0x3fff;
                bus_space_write_2(iot, ioh, ELINK_W0_ADDRESS_CFG, w0_addr_cfg |
                    (sc->sc_mii.mii_media.ifm_cur->ifm_data << 14));
                DELAY(1000);
                break;
            }
        }

        GO_WINDOW(1);           /* Window 1 is operating window */
}

/*
 * Get currently-selected media from card.
 * (if_media callback, may be called before interface is brought up).
 */
void
ep_media_status(struct ifnet *ifp, struct ifmediareq *req)
{
        struct ep_softc *sc = ifp->if_softc;
        bus_space_tag_t iot = sc->sc_iot;
        bus_space_handle_t ioh = sc->sc_ioh;

        if (sc->enabled == 0) {
                req->ifm_active = IFM_ETHER|IFM_NONE;
                req->ifm_status = 0;
                return;
        }

        /*
         * If we have MII, go ask the PHY what's going on.
         */
        if (sc->ep_flags & ELINK_FLAGS_MII) {
                mii_pollstat(&sc->sc_mii);
                req->ifm_active = sc->sc_mii.mii_media_active;
                req->ifm_status = sc->sc_mii.mii_media_status;
                return;
        }

        /*
         * Ok, at this point we claim that our active media is
         * the currently selected media.  We'll update our status
         * if our chipset allows us to detect link.
         */
        req->ifm_active = sc->sc_mii.mii_media.ifm_cur->ifm_media;
        req->ifm_status = 0;

        switch (sc->ep_chipset) {
        case ELINK_CHIPSET_VORTEX:
        case ELINK_CHIPSET_BOOMERANG:
                GO_WINDOW(4);
                req->ifm_status = IFM_AVALID;
                if (bus_space_read_2(iot, ioh, ELINK_W4_MEDIA_TYPE) &
                    LINKBEAT_DETECT)
                        req->ifm_status |= IFM_ACTIVE;
                GO_WINDOW(1);   /* back to operating window */
                break;
        }
}



/*
 * Start outputting on the interface.
 * Always called as splnet().
 */
void
epstart(struct ifnet *ifp)
{
        struct ep_softc *sc = ifp->if_softc;
        bus_space_tag_t iot = sc->sc_iot;
        bus_space_handle_t ioh = sc->sc_ioh;
        struct mbuf *m, *m0;
        int sh, len, pad;
        bus_size_t txreg;

        /* Don't transmit if interface is busy or not running */
        if ((ifp->if_flags & (IFF_RUNNING | IFF_OACTIVE)) != IFF_RUNNING)
                return;

startagain:
        /* Sneak a peek at the next packet */
        IFQ_POLL(&ifp->if_snd, m0);
        if (m0 == 0)
                return;

        /* We need to use m->m_pkthdr.len, so require the header */
        if ((m0->m_flags & M_PKTHDR) == 0)
                panic("epstart: no header mbuf");
        len = m0->m_pkthdr.len;

        pad = (4 - len) & 3;

        /*
         * The 3c509 automatically pads short packets to minimum ethernet
         * length, but we drop packets that are too large. Perhaps we should
         * truncate them instead?
         */
        if (len + pad > ETHER_MAX_LEN) {
                /* packet is obviously too large: toss it */
                ++ifp->if_oerrors;
                IFQ_DEQUEUE(&ifp->if_snd, m0);
                m_freem(m0);
                goto readcheck;
        }

        if (bus_space_read_2(iot, ioh, ep_w1_reg(sc, ELINK_W1_FREE_TX)) <
            len + pad + 4) {
                bus_space_write_2(iot, ioh, ELINK_COMMAND,
                    SET_TX_AVAIL_THRESH |
                    ((len + pad + 4) >> sc->ep_pktlenshift));
                /* not enough room in FIFO */
                ifp->if_flags |= IFF_OACTIVE;
                return;
        } else {
                bus_space_write_2(iot, ioh, ELINK_COMMAND,
                    SET_TX_AVAIL_THRESH | ELINK_THRESH_DISABLE);
        }

        IFQ_DEQUEUE(&ifp->if_snd, m0);
        if (m0 == 0)            /* not really needed */
                return;

        bus_space_write_2(iot, ioh, ELINK_COMMAND, SET_TX_START_THRESH |
            ((len / 4 + sc->tx_start_thresh) /* >> sc->ep_pktlenshift*/));

#if NBPFILTER > 0
        if (ifp->if_bpf)
                bpf_mtap(ifp->if_bpf, m0);
#endif

        /*
         * Do the output at a high interrupt priority level so that an
         * interrupt from another device won't cause a FIFO underrun.
         * We choose splsched() since that blocks essentially everything
         * except for interrupts from serial devices (which typically
         * lose data if their interrupt isn't serviced fast enough).
         *
         * XXX THIS CAN CAUSE CLOCK DRIFT!
         */
        sh = splsched();

        txreg = ep_w1_reg(sc, ELINK_W1_TX_PIO_WR_1);

        if (sc->ep_flags & ELINK_FLAGS_USEFIFOBUFFER) {
                /*
                 * Prime the FIFO buffer counter (number of 16-bit
                 * words about to be written to the FIFO).
                 *
                 * NOTE: NO OTHER ACCESS CAN BE PERFORMED WHILE THIS
                 * COUNTER IS NON-ZERO!
                 */
                bus_space_write_2(iot, ioh, ELINK_W1_RUNNER_WRCTL,
                    (len + pad) >> 1);
        }

        bus_space_write_2(iot, ioh, txreg, len);
        bus_space_write_2(iot, ioh, txreg, 0xffff); /* Second is meaningless */
        if (ELINK_IS_BUS_32(sc->bustype)) {
                for (m = m0; m;) {
                        if (m->m_len > 3)  {
                                /* align our reads from core */
                                if (mtod(m, u_long) & 3)  {
                                        u_long count =
                                            4 - (mtod(m, u_long) & 3);
                                        bus_space_write_multi_1(iot, ioh,
                                            txreg, mtod(m, u_int8_t *), count);
                                        m->m_data =
                                            (void *)(mtod(m, u_long) + count);
                                        m->m_len -= count;
                                }
                                bus_space_write_multi_stream_4(iot, ioh,
                                    txreg, mtod(m, u_int32_t *), m->m_len >> 2);
                                m->m_data = (void *)(mtod(m, u_long) +
                                        (u_long)(m->m_len & ~3));
                                m->m_len -= m->m_len & ~3;
                        }
                        if (m->m_len)  {
                                bus_space_write_multi_1(iot, ioh,
                                    txreg, mtod(m, u_int8_t *), m->m_len);
                        }
                        MFREE(m, m0);
                        m = m0;
                }
        } else {
                for (m = m0; m;) {
                        if (m->m_len > 1)  {
                                if (mtod(m, u_long) & 1)  {
                                        bus_space_write_1(iot, ioh,
                                            txreg, *(mtod(m, u_int8_t *)));
                                        m->m_data =
                                            (void *)(mtod(m, u_long) + 1);
                                        m->m_len -= 1;
                                }
                                bus_space_write_multi_stream_2(iot, ioh,
                                    txreg, mtod(m, u_int16_t *),
                                    m->m_len >> 1);
                        }
                        if (m->m_len & 1)  {
                                bus_space_write_1(iot, ioh, txreg,
                                     *(mtod(m, u_int8_t *) + m->m_len - 1));
                        }
                        MFREE(m, m0);
                        m = m0;
                }
        }
        while (pad--)
                bus_space_write_1(iot, ioh, txreg, 0);

        splx(sh);

        ++ifp->if_opackets;

readcheck:
        if ((bus_space_read_2(iot, ioh, ep_w1_reg(sc, ELINK_W1_RX_STATUS)) &
            ERR_INCOMPLETE) == 0) {
                /* We received a complete packet. */
                u_int16_t status = bus_space_read_2(iot, ioh, ELINK_STATUS);

                if ((status & INTR_LATCH) == 0) {
                        /*
                         * No interrupt, read the packet and continue
                         * Is  this supposed to happen? Is my motherboard
                         * completely busted?
                         */
                        epread(sc);
                } else {
                        /* Got an interrupt, return so that it gets serviced. */
                        return;
                }
        } else {
                /* Check if we are stuck and reset [see XXX comment] */
                if (epstatus(sc)) {
                        if (ifp->if_flags & IFF_DEBUG)
                                printf("%s: adapter reset\n",
                                    device_xname(sc->sc_dev));
                        epreset(sc);
                }
        }

        goto startagain;
}


/*
 * XXX: The 3c509 card can get in a mode where both the fifo status bit
 *      FIFOS_RX_OVERRUN and the status bit ERR_INCOMPLETE are set
 *      We detect this situation and we reset the adapter.
 *      It happens at times when there is a lot of broadcast traffic
 *      on the cable (once in a blue moon).
 */
static int
epstatus(struct ep_softc *sc)
{
        bus_space_tag_t iot = sc->sc_iot;
        bus_space_handle_t ioh = sc->sc_ioh;
        u_int16_t fifost;

        /*
         * Check the FIFO status and act accordingly
         */
        GO_WINDOW(4);
        fifost = bus_space_read_2(iot, ioh, ELINK_W4_FIFO_DIAG);
        GO_WINDOW(1);

        if (fifost & FIFOS_RX_UNDERRUN) {
                if (sc->sc_ethercom.ec_if.if_flags & IFF_DEBUG)
                        printf("%s: RX underrun\n", device_xname(sc->sc_dev));
                epreset(sc);
                return 0;
        }

        if (fifost & FIFOS_RX_STATUS_OVERRUN) {
                if (sc->sc_ethercom.ec_if.if_flags & IFF_DEBUG)
                        printf("%s: RX Status overrun\n", device_xname(sc->sc_dev));
                return 1;
        }

        if (fifost & FIFOS_RX_OVERRUN) {
                if (sc->sc_ethercom.ec_if.if_flags & IFF_DEBUG)
                        printf("%s: RX overrun\n", device_xname(sc->sc_dev));
                return 1;
        }

        if (fifost & FIFOS_TX_OVERRUN) {
                if (sc->sc_ethercom.ec_if.if_flags & IFF_DEBUG)
                        printf("%s: TX overrun\n", device_xname(sc->sc_dev));
                epreset(sc);
                return 0;
        }

        return 0;
}


static void
eptxstat(struct ep_softc *sc)
{
        bus_space_tag_t iot = sc->sc_iot;
        bus_space_handle_t ioh = sc->sc_ioh;
        int i;

        /*
         * We need to read+write TX_STATUS until we get a 0 status
         * in order to turn off the interrupt flag.
         */
        while ((i = bus_space_read_2(iot, ioh,
             ep_w1_reg(sc, ELINK_W1_TX_STATUS))) & TXS_COMPLETE) {
                bus_space_write_2(iot, ioh, ep_w1_reg(sc, ELINK_W1_TX_STATUS),
                    0x0);

                if (i & TXS_JABBER) {
                        ++sc->sc_ethercom.ec_if.if_oerrors;
                        if (sc->sc_ethercom.ec_if.if_flags & IFF_DEBUG)
                                printf("%s: jabber (%x)\n",
                                       device_xname(sc->sc_dev), i);
                        epreset(sc);
                } else if (i & TXS_UNDERRUN) {
                        ++sc->sc_ethercom.ec_if.if_oerrors;
                        if (sc->sc_ethercom.ec_if.if_flags & IFF_DEBUG)
                                printf("%s: fifo underrun (%x) @%d\n",
                                       device_xname(sc->sc_dev), i,
                                       sc->tx_start_thresh);
                        if (sc->tx_succ_ok < 100)
                                    sc->tx_start_thresh = min(ETHER_MAX_LEN,
                                            sc->tx_start_thresh + 20);
                        sc->tx_succ_ok = 0;
                        epreset(sc);
                } else if (i & TXS_MAX_COLLISION) {
                        ++sc->sc_ethercom.ec_if.if_collisions;
                        bus_space_write_2(iot, ioh, ELINK_COMMAND, TX_ENABLE);
                        sc->sc_ethercom.ec_if.if_flags &= ~IFF_OACTIVE;
                } else
                        sc->tx_succ_ok = (sc->tx_succ_ok+1) & 127;
        }
}

int
epintr(void *arg)
{
        struct ep_softc *sc = arg;
        bus_space_tag_t iot = sc->sc_iot;
        bus_space_handle_t ioh = sc->sc_ioh;
        struct ifnet *ifp = &sc->sc_ethercom.ec_if;
        u_int16_t status;
        int ret = 0;

        if (sc->enabled == 0 || !device_is_active(sc->sc_dev))
                return (0);


        for (;;) {
                status = bus_space_read_2(iot, ioh, ELINK_STATUS);

                if ((status & WATCHED_INTERRUPTS) == 0) {
                        if ((status & INTR_LATCH) == 0) {
#if 0
                                printf("%s: intr latch cleared\n",
                                       device_xname(&sc->sc_dev));
#endif
                                break;
                        }
                }

                ret = 1;

                /*
                 * Acknowledge any interrupts.  It's important that we do this
                 * first, since there would otherwise be a race condition.
                 * Due to the i386 interrupt queueing, we may get spurious
                 * interrupts occasionally.
                 */
                bus_space_write_2(iot, ioh, ELINK_COMMAND, ACK_INTR |
                    (status & (INTR_LATCH | ALL_INTERRUPTS)));

#if 0
                status = bus_space_read_2(iot, ioh, ELINK_STATUS);

                printf("%s: intr%s%s%s%s\n", device_xname(&sc->sc_dev),
                       (status & RX_COMPLETE)?" RX_COMPLETE":"",
                       (status & TX_COMPLETE)?" TX_COMPLETE":"",
                       (status & TX_AVAIL)?" TX_AVAIL":"",
                       (status & CARD_FAILURE)?" CARD_FAILURE":"");
#endif

                if (status & RX_COMPLETE) {
                        epread(sc);
                }
                if (status & TX_AVAIL) {
                        sc->sc_ethercom.ec_if.if_flags &= ~IFF_OACTIVE;
                        epstart(&sc->sc_ethercom.ec_if);
                }
                if (status & CARD_FAILURE) {
                        printf("%s: adapter failure (%x)\n",
                            device_xname(sc->sc_dev), status);
#if 1
                        epinit(ifp);
#else
                        epreset(sc);
#endif
                        return (1);
                }
                if (status & TX_COMPLETE) {
                        eptxstat(sc);
                        epstart(ifp);
                }

#if NRND > 0
                if (status)
                        rnd_add_uint32(&sc->rnd_source, status);
#endif
        }

        /* no more interrupts */
        return (ret);
}

void
epread(struct ep_softc *sc)
{
        bus_space_tag_t iot = sc->sc_iot;
        bus_space_handle_t ioh = sc->sc_ioh;
        struct ifnet *ifp = &sc->sc_ethercom.ec_if;
        struct mbuf *m;
        int len;

        len = bus_space_read_2(iot, ioh, ep_w1_reg(sc, ELINK_W1_RX_STATUS));

again:
        if (ifp->if_flags & IFF_DEBUG) {
                int err = len & ERR_MASK;
                const char *s = NULL;

                if (len & ERR_INCOMPLETE)
                        s = "incomplete packet";
                else if (err == ERR_OVERRUN)
                        s = "packet overrun";
                else if (err == ERR_RUNT)
                        s = "runt packet";
                else if (err == ERR_ALIGNMENT)
                        s = "bad alignment";
                else if (err == ERR_CRC)
                        s = "bad crc";
                else if (err == ERR_OVERSIZE)
                        s = "oversized packet";
                else if (err == ERR_DRIBBLE)
                        s = "dribble bits";

                if (s)
                        printf("%s: %s\n", device_xname(sc->sc_dev), s);
        }

        if (len & ERR_INCOMPLETE)
                return;

        if (len & ERR_RX) {
                ++ifp->if_ierrors;
                goto abort;
        }

        len &= RX_BYTES_MASK;   /* Lower 11 bits = RX bytes. */

        /* Pull packet off interface. */
        m = epget(sc, len);
        if (m == 0) {
                ifp->if_ierrors++;
                goto abort;
        }

        ++ifp->if_ipackets;

#if NBPFILTER > 0
        /*
         * Check if there's a BPF listener on this interface.
         * If so, hand off the raw packet to BPF.
         */
        if (ifp->if_bpf)
                bpf_mtap(ifp->if_bpf, m);
#endif

        (*ifp->if_input)(ifp, m);

        /*
         * In periods of high traffic we can actually receive enough
         * packets so that the fifo overrun bit will be set at this point,
         * even though we just read a packet. In this case we
         * are not going to receive any more interrupts. We check for
         * this condition and read again until the fifo is not full.
         * We could simplify this test by not using epstatus(), but
         * rechecking the RX_STATUS register directly. This test could
         * result in unnecessary looping in cases where there is a new
         * packet but the fifo is not full, but it will not fix the
         * stuck behavior.
         *
         * Even with this improvement, we still get packet overrun errors
         * which are hurting performance. Maybe when I get some more time
         * I'll modify epread() so that it can handle RX_EARLY interrupts.
         */
        if (epstatus(sc)) {
                len = bus_space_read_2(iot, ioh,
                    ep_w1_reg(sc, ELINK_W1_RX_STATUS));
                /* Check if we are stuck and reset [see XXX comment] */
                if (len & ERR_INCOMPLETE) {
                        if (ifp->if_flags & IFF_DEBUG)
                                printf("%s: adapter reset\n",
                                    device_xname(sc->sc_dev));
                        epreset(sc);
                        return;
                }
                goto again;
        }

        return;

abort:
        ep_discard_rxtop(iot, ioh);

}

struct mbuf *
epget(struct ep_softc *sc, int totlen)
{
        bus_space_tag_t iot = sc->sc_iot;
        bus_space_handle_t ioh = sc->sc_ioh;
        struct ifnet *ifp = &sc->sc_ethercom.ec_if;
        struct mbuf *m;
        bus_size_t rxreg;
        int len, remaining;
        int s;
        void *newdata;
        u_long offset;

        m = sc->mb[sc->next_mb];
        sc->mb[sc->next_mb] = 0;
        if (m == 0) {
                MGETHDR(m, M_DONTWAIT, MT_DATA);
                if (m == 0)
                        return 0;
        } else {
                /* If the queue is no longer full, refill. */
                if (sc->last_mb == sc->next_mb)
                        callout_reset(&sc->sc_mbuf_callout, 1, epmbuffill, sc);

                /* Convert one of our saved mbuf's. */
                sc->next_mb = (sc->next_mb + 1) % MAX_MBS;
                m->m_data = m->m_pktdat;
                m->m_flags = M_PKTHDR;
                memset(&m->m_pkthdr, 0, sizeof(m->m_pkthdr));
        }
        m->m_pkthdr.rcvif = ifp;
        m->m_pkthdr.len = totlen;
        len = MHLEN;

        /*
         * Allocate big enough space to hold whole packet, to avoid
         * allocating new mbufs on splsched().
         */
        if (totlen + ALIGNBYTES > len) {
                if (totlen + ALIGNBYTES > MCLBYTES) {
                        len = ALIGN(totlen + ALIGNBYTES);
                        MEXTMALLOC(m, len, M_DONTWAIT);
                } else {
                        len = MCLBYTES;
                        MCLGET(m, M_DONTWAIT);
                }
                if ((m->m_flags & M_EXT) == 0) {
                        m_free(m);
                        return 0;
                }
        }

        /* align the struct ip header */
        newdata = (char *)ALIGN(m->m_data + sizeof(struct ether_header))
            - sizeof(struct ether_header);
        m->m_data = newdata;
        m->m_len = totlen;

        rxreg = ep_w1_reg(sc, ELINK_W1_RX_PIO_RD_1);
        remaining = totlen;
        offset = mtod(m, u_long);

        /*
         * We read the packet at a high interrupt priority level so that
         * an interrupt from another device won't cause the card's packet
         * buffer to overflow.  We choose splsched() since that blocks
         * essentially everything except for interrupts from serial
         * devices (which typically lose data if their interrupt isn't
         * serviced fast enough).
         *
         * XXX THIS CAN CAUSE CLOCK DRIFT!
         */
        s = splsched();

        if (sc->ep_flags & ELINK_FLAGS_USEFIFOBUFFER) {
                /*
                 * Prime the FIFO buffer counter (number of 16-bit
                 * words about to be read from the FIFO).
                 *
                 * NOTE: NO OTHER ACCESS CAN BE PERFORMED WHILE THIS
                 * COUNTER IS NON-ZERO!
                 */
                bus_space_write_2(iot, ioh, ELINK_W1_RUNNER_RDCTL, totlen >> 1);
        }

        if (ELINK_IS_BUS_32(sc->bustype)) {
                /*
                 * Read bytes up to the point where we are aligned.
                 * (We can align to 4 bytes, rather than ALIGNBYTES,
                 * here because we're later reading 4-byte chunks.)
                 */
                if ((remaining > 3) && (offset & 3))  {
                        int count = (4 - (offset & 3));
                        bus_space_read_multi_1(iot, ioh,
                            rxreg, (u_int8_t *) offset, count);
                        offset += count;
                        remaining -= count;
                }
                if (remaining > 3) {
                        bus_space_read_multi_stream_4(iot, ioh,
                            rxreg, (u_int32_t *) offset,
                                    remaining >> 2);
                        offset += remaining & ~3;
                        remaining &= 3;
                }
                if (remaining)  {
                        bus_space_read_multi_1(iot, ioh,
                            rxreg, (u_int8_t *) offset, remaining);
                }
        } else {
                if ((remaining > 1) && (offset & 1))  {
                        bus_space_read_multi_1(iot, ioh,
                            rxreg, (u_int8_t *) offset, 1);
                        remaining -= 1;
                        offset += 1;
                }
                if (remaining > 1) {
                        bus_space_read_multi_stream_2(iot, ioh,
                            rxreg, (u_int16_t *) offset,
                            remaining >> 1);
                        offset += remaining & ~1;
                }
                if (remaining & 1)  {
                                bus_space_read_multi_1(iot, ioh,
                            rxreg, (u_int8_t *) offset, remaining & 1);
                }
        }

        ep_discard_rxtop(iot, ioh);

        if (sc->ep_flags & ELINK_FLAGS_USEFIFOBUFFER)
                bus_space_write_2(iot, ioh, ELINK_W1_RUNNER_RDCTL, 0);
        splx(s);

        return (m);
}

int
epioctl(struct ifnet *ifp, u_long cmd, void *data)
{
        struct ep_softc *sc = ifp->if_softc;
        struct ifreq *ifr = (struct ifreq *)data;
        int s, error = 0;

        s = splnet();

        switch (cmd) {

        case SIOCSIFMEDIA:
        case SIOCGIFMEDIA:
                error = ifmedia_ioctl(ifp, ifr, &sc->sc_mii.mii_media, cmd);
                break;

        case SIOCADDMULTI:
        case SIOCDELMULTI:
                if (sc->enabled == 0) {
                        error = EIO;
                        break;
                }

        default:
                error = ether_ioctl(ifp, cmd, data);

                if (error == ENETRESET) {
                        /*
                         * Multicast list has changed; set the hardware filter
                         * accordingly.
                         */
                        if (ifp->if_flags & IFF_RUNNING)
                                epreset(sc);
                        error = 0;
                }
                break;
        }

        splx(s);
        return (error);
}

void
epreset(struct ep_softc *sc)
{
        int s;

        s = splnet();
        epinit(&sc->sc_ethercom.ec_if);
        splx(s);
}

void
epwatchdog(struct ifnet *ifp)
{
        struct ep_softc *sc = ifp->if_softc;

        log(LOG_ERR, "%s: device timeout\n", device_xname(sc->sc_dev));
        ++sc->sc_ethercom.ec_if.if_oerrors;

        epreset(sc);
}

void
epstop(struct ifnet *ifp, int disable)
{
        struct ep_softc *sc = ifp->if_softc;
        bus_space_tag_t iot = sc->sc_iot;
        bus_space_handle_t ioh = sc->sc_ioh;

        if (sc->ep_flags & ELINK_FLAGS_MII) {
                /* Stop the one second clock. */
                callout_stop(&sc->sc_mbuf_callout);

                /* Down the MII. */
                mii_down(&sc->sc_mii);
        }

        if (sc->ep_chipset == ELINK_CHIPSET_ROADRUNNER) {
                /*
                 * Clear the FIFO buffer count, thus halting
                 * any currently-running transactions.
                 */
                GO_WINDOW(1);           /* sanity */
                bus_space_write_2(iot, ioh, ELINK_W1_RUNNER_WRCTL, 0);
                bus_space_write_2(iot, ioh, ELINK_W1_RUNNER_RDCTL, 0);
        }

        bus_space_write_2(iot, ioh, ELINK_COMMAND, RX_DISABLE);
        ep_discard_rxtop(iot, ioh);

        bus_space_write_2(iot, ioh, ELINK_COMMAND, TX_DISABLE);
        bus_space_write_2(iot, ioh, ELINK_COMMAND, STOP_TRANSCEIVER);

        ep_reset_cmd(sc, ELINK_COMMAND, RX_RESET);
        ep_reset_cmd(sc, ELINK_COMMAND, TX_RESET);

        bus_space_write_2(iot, ioh, ELINK_COMMAND, ACK_INTR | INTR_LATCH);
        bus_space_write_2(iot, ioh, ELINK_COMMAND, SET_RD_0_MASK);
        bus_space_write_2(iot, ioh, ELINK_COMMAND, SET_INTR_MASK);
        bus_space_write_2(iot, ioh, ELINK_COMMAND, SET_RX_FILTER);

        epmbufempty(sc);

        if (disable)
                epdisable(sc);

        ifp->if_flags &= ~IFF_RUNNING;
}


/*
 * Before reboots, reset card completely.
 */
static bool
epshutdown(device_t self, int howto)
{
        struct ep_softc *sc = device_private(self);
        int s = splnet();

        if (sc->enabled) {
                epstop(&sc->sc_ethercom.ec_if, 0);
                ep_reset_cmd(sc, ELINK_COMMAND, GLOBAL_RESET);
                epdisable(sc);
                sc->enabled = 0;
        }
        splx(s);

        return true;
}

/*
 * We get eeprom data from the id_port given an offset into the
 * eeprom.  Basically; after the ID_sequence is sent to all of
 * the cards; they enter the ID_CMD state where they will accept
 * command requests. 0x80-0xbf loads the eeprom data.  We then
 * read the port 16 times and with every read; the cards check
 * for contention (ie: if one card writes a 0 bit and another
 * writes a 1 bit then the host sees a 0. At the end of the cycle;
 * each card compares the data on the bus; if there is a difference
 * then that card goes into ID_WAIT state again). In the meantime;
 * one bit of data is returned in the AX register which is conveniently
 * returned to us by bus_space_read_2().  Hence; we read 16 times getting one
 * bit of data with each read.
 *
 * NOTE: the caller must provide an i/o handle for ELINK_ID_PORT!
 */
u_int16_t
epreadeeprom(bus_space_tag_t iot, bus_space_handle_t ioh, int offset)
{
        u_int16_t data = 0;
        int i;

        bus_space_write_2(iot, ioh, 0, 0x80 + offset);
        delay(1000);
        for (i = 0; i < 16; i++)
                data = (data << 1) | (bus_space_read_2(iot, ioh, 0) & 1);
        return (data);
}

static int
epbusyeeprom(struct ep_softc *sc)
{
        bus_space_tag_t iot = sc->sc_iot;
        bus_space_handle_t ioh = sc->sc_ioh;
        bus_size_t eecmd;
        int i = 100, j;
        uint16_t busybit;

        if (sc->bustype == ELINK_BUS_PCMCIA) {
                delay(1000);
                return 0;
        }

        if (sc->ep_chipset == ELINK_CHIPSET_CORKSCREW) {
                eecmd = CORK_ASIC_EEPROM_COMMAND;
                busybit = CORK_EEPROM_BUSY;
        } else {
                eecmd = ELINK_W0_EEPROM_COMMAND;
                busybit = EEPROM_BUSY;
        }

        j = 0;          /* bad GCC flow analysis */
        while (i--) {
                j = bus_space_read_2(iot, ioh, eecmd);
                if (j & busybit)
                        delay(100);
                else
                        break;
        }
        if (i == 0) {
                aprint_normal("\n");
                aprint_error_dev(sc->sc_dev, "eeprom failed to come ready\n");
                return (1);
        }
        if (sc->ep_chipset != ELINK_CHIPSET_CORKSCREW &&
            (j & EEPROM_TST_MODE) != 0) {
                /* XXX PnP mode? */
                printf("\n%s: erase pencil mark!\n", device_xname(sc->sc_dev));
                return (1);
        }
        return (0);
}

u_int16_t
ep_read_eeprom(struct ep_softc *sc, u_int16_t offset)
{
        bus_size_t eecmd, eedata;
        u_int16_t readcmd;

        if (sc->ep_chipset == ELINK_CHIPSET_CORKSCREW) {
                eecmd = CORK_ASIC_EEPROM_COMMAND;
                eedata = CORK_ASIC_EEPROM_DATA;
        } else {
                eecmd = ELINK_W0_EEPROM_COMMAND;
                eedata = ELINK_W0_EEPROM_DATA;
        }

        /*
         * RoadRunner has a larger EEPROM, so a different read command
         * is required.
         */
        if (sc->ep_chipset == ELINK_CHIPSET_ROADRUNNER)
                readcmd = READ_EEPROM_RR;
        else
                readcmd = READ_EEPROM;

        if (epbusyeeprom(sc))
                return (0);             /* XXX why is eeprom busy? */

        bus_space_write_2(sc->sc_iot, sc->sc_ioh, eecmd, readcmd | offset);

        if (epbusyeeprom(sc))
                return (0);             /* XXX why is eeprom busy? */

        return (bus_space_read_2(sc->sc_iot, sc->sc_ioh, eedata));
}

void
epmbuffill(void *v)
{
        struct ep_softc *sc = v;
        struct mbuf *m;
        int s, i;

        s = splnet();
        i = sc->last_mb;
        do {
                if (sc->mb[i] == 0) {
                        MGET(m, M_DONTWAIT, MT_DATA);
                        if (m == 0)
                                break;
                        sc->mb[i] = m;
                }
                i = (i + 1) % MAX_MBS;
        } while (i != sc->next_mb);
        sc->last_mb = i;
        /* If the queue was not filled, try again. */
        if (sc->last_mb != sc->next_mb)
                callout_reset(&sc->sc_mbuf_callout, 1, epmbuffill, sc);
        splx(s);
}

void
epmbufempty(struct ep_softc *sc)
{
        int s, i;

        s = splnet();
        for (i = 0; i < MAX_MBS; i++) {
                if (sc->mb[i]) {
                        m_freem(sc->mb[i]);
                        sc->mb[i] = NULL;
                }
        }
        sc->last_mb = sc->next_mb = 0;
        callout_stop(&sc->sc_mbuf_callout);
        splx(s);
}

int
epenable(struct ep_softc *sc)
{

        if (sc->enabled == 0 && sc->enable != NULL) {
                if ((*sc->enable)(sc) != 0) {
                        aprint_error_dev(sc->sc_dev, "device enable failed\n");
                        return (EIO);
                }
        }

        sc->enabled = 1;
        return (0);
}

void
epdisable(struct ep_softc *sc)
{

        if (sc->enabled != 0 && sc->disable != NULL) {
                (*sc->disable)(sc);
                sc->enabled = 0;
        }
}

/*
 * ep_activate:
 *
 *      Handle device activation/deactivation requests.
 */
int
ep_activate(device_t self, enum devact act)
{
        struct ep_softc *sc = device_private(self);

        switch (act) {
        case DVACT_DEACTIVATE:
                if_deactivate(&sc->sc_ethercom.ec_if);
                return 0;
        default:
                return EOPNOTSUPP;
        }
}

/*
 * ep_detach:
 *
 *      Detach a elink3 interface.
 */
int
ep_detach(device_t self, int flags)
{
        struct ep_softc *sc = device_private(self);
        struct ifnet *ifp = &sc->sc_ethercom.ec_if;

        /* Succeed now if there's no work to do. */
        if ((sc->sc_flags & ELINK_FLAGS_ATTACHED) == 0)
                return (0);

        epdisable(sc);

        callout_stop(&sc->sc_mii_callout);
        callout_stop(&sc->sc_mbuf_callout);

        if (sc->ep_flags & ELINK_FLAGS_MII) {
                /* Detach all PHYs */
                mii_detach(&sc->sc_mii, MII_PHY_ANY, MII_OFFSET_ANY);
        }

        /* Delete all remaining media. */
        ifmedia_delete_instance(&sc->sc_mii.mii_media, IFM_INST_ANY);

#if NRND > 0
        rnd_detach_source(&sc->rnd_source);
#endif
        ether_ifdetach(ifp);
        if_detach(ifp);

        pmf_device_deregister(sc->sc_dev);

        return (0);
}

u_int32_t
ep_mii_bitbang_read(device_t self)
{
        struct ep_softc *sc = device_private(self);

        /* We're already in Window 4. */
        return (bus_space_read_2(sc->sc_iot, sc->sc_ioh,
            ELINK_W4_BOOM_PHYSMGMT));
}

void
ep_mii_bitbang_write(device_t self, u_int32_t val)
{
        struct ep_softc *sc = device_private(self);

        /* We're already in Window 4. */
        bus_space_write_2(sc->sc_iot, sc->sc_ioh,
            ELINK_W4_BOOM_PHYSMGMT, val);
}

int
ep_mii_readreg(device_t self, int phy, int reg)
{
        struct ep_softc *sc = device_private(self);
        int val;

        GO_WINDOW(4);

        val = mii_bitbang_readreg(self, &ep_mii_bitbang_ops, phy, reg);

        GO_WINDOW(1);

        return (val);
}

void
ep_mii_writereg(device_t self, int phy, int reg, int val)
{
        struct ep_softc *sc = device_private(self);

        GO_WINDOW(4);

        mii_bitbang_writereg(self, &ep_mii_bitbang_ops, phy, reg, val);

        GO_WINDOW(1);
}

void
ep_statchg(device_t self)
{
        struct ep_softc *sc = device_private(self);
        bus_space_tag_t iot = sc->sc_iot;
        bus_space_handle_t ioh = sc->sc_ioh;
        int mctl;

        GO_WINDOW(3);
        mctl = bus_space_read_2(iot, ioh, ELINK_W3_MAC_CONTROL);
        if (sc->sc_mii.mii_media_active & IFM_FDX)
                mctl |= MAC_CONTROL_FDX;
        else
                mctl &= ~MAC_CONTROL_FDX;
        bus_space_write_2(iot, ioh, ELINK_W3_MAC_CONTROL, mctl);
        GO_WINDOW(1);   /* back to operating window */
}

void
ep_power(int why, void *arg)
{
        struct ep_softc *sc = arg;
        struct ifnet *ifp = &sc->sc_ethercom.ec_if;
        int s;

        s = splnet();
        switch (why) {
        case PWR_SUSPEND:
        case PWR_STANDBY:
                epstop(ifp, 1);
                break;
        case PWR_RESUME:
                if (ifp->if_flags & IFF_UP) {
                        (void)epinit(ifp);
                }
                break;
        case PWR_SOFTSUSPEND:
        case PWR_SOFTSTANDBY:
        case PWR_SOFTRESUME:
                break;
        }
        splx(s);
}