Sync usage with man page.
[netbsd-mini2440.git] / sys / dev / ic / elinkxlvar.h
blobcb01817b34d545b8593e2e02c6d8ab90ae9e9862
1 /* $NetBSD: elinkxlvar.h,v 1.19 2008/04/14 20:03:13 spz Exp $ */
3 /*-
4 * Copyright (c) 1998 The NetBSD Foundation, Inc.
5 * All rights reserved.
7 * This code is derived from software contributed to The NetBSD Foundation
8 * by Frank van der Linden.
10 * Redistribution and use in source and binary forms, with or without
11 * modification, are permitted provided that the following conditions
12 * are met:
13 * 1. Redistributions of source code must retain the above copyright
14 * notice, this list of conditions and the following disclaimer.
15 * 2. Redistributions in binary form must reproduce the above copyright
16 * notice, this list of conditions and the following disclaimer in the
17 * documentation and/or other materials provided with the distribution.
19 * THIS SOFTWARE IS PROVIDED BY THE NETBSD FOUNDATION, INC. AND CONTRIBUTORS
20 * ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED
21 * TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
22 * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS
23 * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
24 * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
25 * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
26 * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
27 * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
28 * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
29 * POSSIBILITY OF SUCH DAMAGE.
32 #include "rnd.h"
34 #if NRND > 0
35 #include <sys/rnd.h>
36 #endif
39 * Ethernet software status per interface.
41 struct ex_softc {
42 device_t sc_dev;
43 void *sc_ih;
45 struct ethercom sc_ethercom; /* Ethernet common part */
46 bus_space_tag_t sc_iot; /* bus cookie */
47 bus_space_handle_t sc_ioh; /* bus i/o handle */
48 bus_dma_tag_t sc_dmat; /* bus dma tag */
49 bus_dmamap_t sc_dpd_dmamap;
50 bus_dmamap_t sc_upd_dmamap;
51 #define sc_upddma sc_upd_dmamap->dm_segs[0].ds_addr
52 #define sc_dpddma sc_dpd_dmamap->dm_segs[0].ds_addr
53 struct ex_upd *sc_upd;
54 struct ex_dpd *sc_dpd;
55 bus_dmamap_t sc_tx_dmamaps[EX_NDPD]; /* DMA maps for DPDs */
56 bus_dmamap_t sc_rx_dmamaps[EX_NUPD]; /* DMA maps for UPDs */
57 struct ex_rxdesc sc_rxdescs[EX_NUPD];
58 struct ex_txdesc sc_txdescs[EX_NDPD];
60 struct ex_rxdesc *rx_head;
61 struct ex_rxdesc *rx_tail;
63 struct ex_txdesc *tx_head;
64 struct ex_txdesc *tx_tail;
65 struct ex_txdesc *tx_free;
66 struct ex_txdesc *tx_ftail;
68 int tx_start_thresh; /* Current TX_start_thresh. */
69 int tx_succ_ok; /* # packets sent in sequence */
71 u_int ex_connectors; /* Connectors on this card. */
72 mii_data_t ex_mii; /* mii bus data */
73 struct callout ex_mii_callout; /* mii callout */
74 u_int ex_conf; /* config flags */
76 #define EX_CONF_MII 0x0001 /* has MII bus */
77 #define EX_CONF_INTPHY 0x0002 /* has internal PHY */
78 #define EX_CONF_90XB 0x0004 /* is 90xB */
79 #define EX_CONF_INV_LED_POLARITY 0x0010 /* CardBus & MiniPCI: LED polarity */
80 #define EX_CONF_PHY_POWER 0x0020 /* CardBus & MiniPCI: PHY power */
81 #define EX_CONF_EEPROM_OFF 0x0040 /* EEPROM is offset by 0x30 */
82 #define EX_CONF_EEPROM_8BIT 0x0080 /* 8 bit EEPROM */
83 #define EX_CONF_PCI_FUNCREG 0x0100 /* Has PCI function registers */
84 #define EX_CONF_RESETHACK 0x0200 /* Hack to make reset work on 556B */
85 #define EX_CONF_NO_XCVR_PWR 0x0400 /* Hack to enable later 556B xcvr */
87 #define EX_XCVR_PWR_MAGICBITS 0x0900 /* NO_XCVR_PWR magic value */
91 * XXX code duplication from elink3var.h
93 u_int ex_flags; /* capabilities flag (from EEPROM) */
94 #define EX_FLAGS_PNP 0x0001
95 #define EX_FLAGS_FULLDUPLEX 0x0002
96 #define EX_FLAGS_LARGEPKT 0x0004 /* 4k packet support */
97 #define EX_FLAGS_SLAVEDMA 0x0008
98 #define EX_FLAGS_SECONDDMA 0x0010
99 #define EX_FLAGS_FULLDMA 0x0020
100 #define EX_FLAGS_FRAGMENTDMA 0x0040
101 #define EX_FLAGS_CRC_PASSTHRU 0x0080
102 #define EX_FLAGS_TXDONE 0x0100
103 #define EX_FLAGS_NO_TXLENGTH 0x0200
104 #define EX_FLAGS_RXREPEAT 0x0400
105 #define EX_FLAGS_SNOOPING 0x0800
106 #define EX_FLAGS_100MBIT 0x1000
107 #define EX_FLAGS_POWERMGMT 0x2000
108 #define EX_FLAGS_ATTACHED 0x4000 /* attach has succeeded */
110 u_char ex_bustype; /* parent bus type (currently unused) */
112 #define EX_BUS_PCI 0
113 #define EX_BUS_CARDBUS 1
115 #if NRND > 0
116 rndsource_element_t rnd_source;
117 #endif
119 /* power management hooks */
120 int (*enable)(struct ex_softc *);
121 void (*disable)(struct ex_softc *);
122 int enabled;
124 /* interrupt acknowledge hook */
125 void (*intr_ack)(struct ex_softc *);
127 bus_dma_segment_t sc_useg, sc_dseg;
128 int sc_urseg, sc_drseg;
130 short sc_if_flags;
133 #define ex_waitcmd(sc) \
134 do { \
135 int stat; \
136 do { \
137 stat = bus_space_read_2((sc)->sc_iot, (sc)->sc_ioh, \
138 ELINK_STATUS); \
139 } while ((stat & COMMAND_IN_PROGRESS) && (stat != 0xffff)); \
140 } while (0)\
142 u_int16_t exreadeeprom(bus_space_tag_t, bus_space_handle_t, int);
143 void ex_config(struct ex_softc *);
145 int ex_intr(void *);
146 void ex_stop(struct ifnet *, int);
147 void ex_watchdog(struct ifnet *);
148 int ex_ioctl(struct ifnet *ifp, u_long, void *);
149 int ex_activate(device_t, enum devact);
150 int ex_detach(struct ex_softc *);
152 int ex_enable(struct ex_softc *);
153 void ex_disable(struct ex_softc *);