sys/dev/ic/i82586reg.h

   1 /*      $NetBSD: i82586reg.h,v 1.12 2007/03/04 06:01:56 christos Exp $  */
   2
   3 /*-
   4  * Copyright (c) 1998 The NetBSD Foundation, Inc.
   5  * All rights reserved.
   6  *
   7  * This code is derived from software contributed to The NetBSD Foundation
   8  * by Paul Kranenburg.
   9  *
  10  * Redistribution and use in source and binary forms, with or without
  11  * modification, are permitted provided that the following conditions
  12  * are met:
  13  * 1. Redistributions of source code must retain the above copyright
  14  *    notice, this list of conditions and the following disclaimer.
  15  * 2. Redistributions in binary form must reproduce the above copyright
  16  *    notice, this list of conditions and the following disclaimer in the
  17  *    documentation and/or other materials provided with the distribution.
  18  *
  19  * THIS SOFTWARE IS PROVIDED BY THE NETBSD FOUNDATION, INC. AND CONTRIBUTORS
  20  * ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED
  21  * TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
  22  * PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS
  23  * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
  24  * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
  25  * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
  26  * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
  27  * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
  28  * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
  29  * POSSIBILITY OF SUCH DAMAGE.
  30  */
  31
  32 /*-
  33  * Copyright (c) 1992, University of Vermont and State Agricultural College.
  34  * Copyright (c) 1992, Garrett A. Wollman.
  35  * All rights reserved.
  36  *
  37  * Redistribution and use in source and binary forms, with or without
  38  * modification, are permitted provided that the following conditions
  39  * are met:
  40  * 1. Redistributions of source code must retain the above copyright
  41  *    notice, this list of conditions and the following disclaimer.
  42  * 2. Redistributions in binary form must reproduce the above copyright
  43  *    notice, this list of conditions and the following disclaimer in the
  44  *    documentation and/or other materials provided with the distribution.
  45  * 3. All advertising materials mentioning features or use of this software
  46  *    must display the following acknowledgement:
  47  *      This product includes software developed by the University of
  48  *      Vermont and State Agricultural College and Garrett A. Wollman.
  49  * 4. Neither the name of the University nor the name of the author
  50  *    may be used to endorse or promote products derived from this software
  51  *    without specific prior written permission.
  52  *
  53  * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
  54  * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
  55  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
  56  * ARE DISCLAIMED.  IN NO EVENT SHALL THE UNIVERSITY OR AUTHOR BE LIABLE
  57  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
  58  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
  59  * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
  60  * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
  61  * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
  62  * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
  63  * SUCH DAMAGE.
  64  */
  65
  66 /*
  67  * Intel 82586 Ethernet chip
  68  * Register, bit, and structure definitions.
  69  *
  70  * Written by GAW with reference to the Clarkson Packet Driver code for this
  71  * chip written by Russ Nelson and others.
  72  */
  73
  74 /*
  75  * NOTE, the structure definitions in here are for reference only.
  76  * We use integer offsets exclusively to access the i82586 data structures.
  77  */
  78
  79 /*
  80  * The i82596 has a hardware port that can be used to command the
  81  * chip to perform special functions.  For all but IE_PORT_RESET,
  82  * a 16-byte aligned memory address is ORed into the port command.
  83  */
  84 #define IE_PORT_RESET           0x00    /* software reset */
  85 #define IE_PORT_SELF_TEST       0x01    /* self-test */
  86 #define IE_PORT_ALT_SCP         0x02    /* set alternate SCP address */
  87 #define IE_PORT_DUMP            0x03    /* dump state */
  88
  89 /*
  90  * This is the master configuration block.
  91  * It tells the hardware where all the rest of the stuff is.
  92  *-
  93 struct __ie_sys_conf_ptr {
  94         u_int16_t       mbz;                    // must be zero
  95         u_int8_t        ie_bus_use;             // true if 8-bit only
  96         u_int8_t        mbz2[5];                // must be zero
  97         u_int32_t       ie_iscp_ptr;            // 24-bit physaddr of ISCP
  98 };
  99  */
 100 #define IE_SCP_SZ               12
 101 #define IE_SCP_BUS_USE(base)    ((base) + 2)
 102 #define IE_SCP_ISCP(base)       ((base) + 8)
 103
 104 /*
 105  * SYSBUS byte flags.  Most are specific to the i82596, and so
 106  * far we always run an i82596 in i82586-compatible mode.
 107  */
 108 #define IE_SYSBUS_16BIT         (0x0 << 0)
 109 #define IE_SYSBUS_8BIT          (0x1 << 0)
 110 #define IE_SYSBUS_596_82586     (0x0 << 1)
 111 #define IE_SYSBUS_596_32SEG     (0x1 << 1)
 112 #define IE_SYSBUS_596_LINEAR    (0x2 << 1)
 113 #define IE_SYSBUS_596_TRGINT    (0x0 << 3)
 114 #define IE_SYSBUS_596_TRGEXT    (0x1 << 3)
 115 #define IE_SYSBUS_596_NOLOCK    (0x0 << 4)
 116 #define IE_SYSBUS_596_LOCK      (0x1 << 4)
 117 #define IE_SYSBUS_596_INTHIGH   (0x0 << 4)
 118 #define IE_SYSBUS_596_INTLOW    (0x1 << 5)
 119 #define IE_SYSBUS_596_RSVD_SET  (0x1 << 6)
 120 #define IE_SYSBUS_596_LE        (0x0 << 7)
 121 #define IE_SYSBUS_596_BE        (0x1 << 7)
 122
 123 /*
 124  * Note that this is wired in hardware; the SCP is always located here, no
 125  * matter what.
 126  */
 127 #define IE_SCP_ADDR 0xfffff4
 128
 129 /*
 130  * The tells the hardware where all the rest of the stuff is, too.
 131  * FIXME: some of these should be re-commented after we figure out their
 132  * REAL function.
 133  *-
 134 struct __ie_int_sys_conf_ptr {
 135         u_int8_t        ie_busy;        // zeroed after init
 136         u_int8_t        mbz;
 137         u_int16_t       ie_scb_offset;  // 16-bit physaddr of next struct
 138         void *          ie_base;        // 24-bit physaddr for all 16-bit vars
 139 };
 140  */
 141 #define IE_ISCP_SZ              8
 142 #define IE_ISCP_BUSY(base)      ((base) + 0)
 143 #define IE_ISCP_SCB(base)       ((base) + 2)
 144 #define IE_ISCP_BASE(base)      ((base) + 4)
 145
 146 /*
 147  * This FINALLY tells the hardware what to do and where to put it.
 148  *-
 149 struct __ie_sys_ctl_block {
 150         u_int16_t ie_status;            // status word
 151         u_int16_t ie_command;           // command word
 152         u_int16_t ie_command_list;      // 16-pointer to command block list
 153         u_int16_t ie_recv_list;         // 16-pointer to receive frame list
 154         u_int16_t ie_err_crc;           // CRC errors
 155         u_int16_t ie_err_align;         // Alignment errors
 156         u_int16_t ie_err_resource;      // Resource errors
 157         u_int16_t ie_err_overrun;       // Overrun errors
 158 };
 159  */
 160 #define IE_SCB_SZ               16
 161 #define IE_SCB_STATUS(base)     ((base) + 0)
 162 #define IE_SCB_CMD(base)        ((base) + 2)
 163 #define IE_SCB_CMDLST(base)     ((base) + 4)
 164 #define IE_SCB_RCVLST(base)     ((base) + 6)
 165 #define IE_SCB_ERRCRC(base)     ((base) + 8)
 166 #define IE_SCB_ERRALN(base)     ((base) + 10)
 167 #define IE_SCB_ERRRES(base)     ((base) + 12)
 168 #define IE_SCB_ERROVR(base)     ((base) + 14)
 169
 170 /* Command values */
 171 #define IE_RUC_MASK     0x0070  /* mask for RU command */
 172 #define IE_RUC_NOP      0       /* for completeness */
 173 #define IE_RUC_START    0x0010  /* start receive unit command */
 174 #define IE_RUC_RESUME   0x0020  /* resume a suspended receiver command */
 175 #define IE_RUC_SUSPEND  0x0030  /* suspend receiver command */
 176 #define IE_RUC_ABORT    0x0040  /* abort current receive operation */
 177
 178 #define IE_CUC_MASK     0x0700  /* mask for CU command */
 179 #define IE_CUC_NOP      0       /* included for completeness */
 180 #define IE_CUC_START    0x0100  /* do-command command */
 181 #define IE_CUC_RESUME   0x0200  /* resume a suspended cmd list */
 182 #define IE_CUC_SUSPEND  0x0300  /* suspend current command */
 183 #define IE_CUC_ABORT    0x0400  /* abort current command */
 184
 185 #define IE_ACK_COMMAND  0xf000  /* mask for ACK command */
 186 #define IE_ACK_CX       0x8000  /* ack IE_ST_CX */
 187 #define IE_ACK_FR       0x4000  /* ack IE_ST_FR */
 188 #define IE_ACK_CNA      0x2000  /* ack IE_ST_CNA */
 189 #define IE_ACK_RNR      0x1000  /* ack IE_ST_RNR */
 190
 191 #define IE_ACTION_COMMAND(x) (((x) & IE_CUC_MASK) == IE_CUC_START)
 192                                 /* is this command an action command? */
 193
 194 /* Status values */
 195 #define IE_ST_WHENCE    0xf000  /* mask for cause of interrupt */
 196 #define IE_ST_CX        0x8000  /* command with I bit completed */
 197 #define IE_ST_FR        0x4000  /* frame received */
 198 #define IE_ST_CNA       0x2000  /* all commands completed */
 199 #define IE_ST_RNR       0x1000  /* receive not ready */
 200
 201 #define IE_CUS_MASK     0x0700  /* mask for command unit status */
 202 #define IE_CUS_ACTIVE   0x0200  /* command unit is active */
 203 #define IE_CUS_SUSPEND  0x0100  /* command unit is suspended */
 204
 205 #define IE_RUS_MASK     0x0070  /* mask for receiver unit status */
 206 #define IE_RUS_SUSPEND  0x0010  /* receiver is suspended */
 207 #define IE_RUS_NOSPACE  0x0020  /* receiver has no resources */
 208 #define IE_RUS_READY    0x0040  /* receiver is ready */
 209
 210 /*
 211  * This is filled in partially by the chip, partially by us.
 212  *-
 213 struct __ie_recv_frame_desc {
 214         u_int16_t       ie_fd_status;   // status for this frame
 215         u_int16_t       ie_fd_last;     // end of frame list flag
 216         u_int16_t       ie_fd_next;     // 16-pointer to next RFD
 217         u_int16_t       ie_fd_buf_desc; // 16-pointer to list of buffer descs
 218         struct __ie_en_addr dest;       // destination ether
 219         struct __ie_en_addr src;        // source ether
 220         u_int16_t       ie_length;      // 802 length/Ether type
 221         u_short         mbz;            // must be zero
 222 };
 223  */
 224 #define IE_RFRAME_SZ                    24
 225 #define IE_RFRAME_ADDR(base,i)          ((base) + (i) * IE_RFRAME_SZ)
 226 #define IE_RFRAME_STATUS(b,i)           (IE_RFRAME_ADDR(b,i) + 0)
 227 #define IE_RFRAME_LAST(b,i)             (IE_RFRAME_ADDR(b,i) + 2)
 228 #define IE_RFRAME_NEXT(b,i)             (IE_RFRAME_ADDR(b,i) + 4)
 229 #define IE_RFRAME_BUFDESC(b,i)          (IE_RFRAME_ADDR(b,i) + 6)
 230 #define IE_RFRAME_EDST(b,i)             (IE_RFRAME_ADDR(b,i) + 8)
 231 #define IE_RFRAME_ESRC(b,i)             (IE_RFRAME_ADDR(b,i) + 14)
 232 #define IE_RFRAME_ELEN(b,i)             (IE_RFRAME_ADDR(b,i) + 20)
 233
 234 /* "last" bits */
 235 #define IE_FD_EOL       0x8000  /* last rfd in list */
 236 #define IE_FD_SUSP      0x4000  /* suspend RU after receipt */
 237
 238 /* status field bits */
 239 #define IE_FD_COMPLETE  0x8000  /* frame is complete */
 240 #define IE_FD_BUSY      0x4000  /* frame is busy */
 241 #define IE_FD_OK        0x2000  /* frame is ok */
 242 #define IE_FD_CRC       0x0800  /* CRC error */
 243 #define IE_FD_ALGN      0x0400  /* Alignment error */
 244 #define IE_FD_RNR       0x0200  /* receiver out of resources here */
 245 #define IE_FD_OVR       0x0100  /* DMA overrun */
 246 #define IE_FD_SHORT     0x0080  /* Short frame */
 247 #define IE_FD_NOEOF     0x0040  /* no EOF (?) */
 248 #define IE_FD_ERRMASK           /* all error bits */ \
 249         (IE_FD_CRC|IE_FD_ALGN|IE_FD_RNR|IE_FD_OVR|IE_FD_SHORT|IE_FD_NOEOF)
 250 #define IE_FD_STATUSBITS        \
 251         "\20\20COMPLT\17BUSY\16OK\14CRC\13ALGN\12RNR\11OVR\10SHORT\7NOEOF"
 252
 253 /*
 254  * linked list of buffers...
 255  *-
 256 struct __ie_recv_buf_desc {
 257         u_int16_t       ie_rbd_status;  // status for this buffer
 258         u_int16_t       ie_rbd_next;    // 16-pointer to next RBD
 259         void *          ie_rbd_buffer;  // 24-pointer to buffer for this RBD
 260         u_int16_t       ie_rbd_length;  // length of the buffer
 261         u_int16_t       mbz;            // must be zero
 262 };
 263  */
 264 #define IE_RBD_SZ                       12
 265 #define IE_RBD_ADDR(base,i)             ((base) + (i) * IE_RBD_SZ)
 266 #define IE_RBD_STATUS(b,i)              (IE_RBD_ADDR(b,i) + 0)
 267 #define IE_RBD_NEXT(b,i)                (IE_RBD_ADDR(b,i) + 2)
 268 #define IE_RBD_BUFADDR(b,i)             (IE_RBD_ADDR(b,i) + 4)
 269 #define IE_RBD_BUFLEN(b,i)              (IE_RBD_ADDR(b,i) + 8)
 270
 271 /* RBD status fields */
 272 #define IE_RBD_LAST     0x8000          /* last buffer */
 273 #define IE_RBD_USED     0x4000          /* this buffer has data */
 274 #define IE_RBD_CNTMASK  0x3fff          /* byte count of buffer data */
 275
 276 /* RDB `End Of List' flag; encoded in `buffer length' field */
 277 #define IE_RBD_EOL      0x8000          /* last buffer */
 278
 279
 280 /*
 281  * All commands share this in common.
 282  *-
 283 struct __ie_cmd_common {
 284         u_int16_t ie_cmd_status;        // status of this command
 285         u_int16_t ie_cmd_cmd;           // command word
 286         u_int16_t ie_cmd_link;          // link to next command
 287 };
 288  */
 289 #define IE_CMD_COMMON_SZ                6
 290 #define IE_CMD_COMMON_STATUS(base)      ((base) + 0)
 291 #define IE_CMD_COMMON_CMD(base)         ((base) + 2)
 292 #define IE_CMD_COMMON_LINK(base)        ((base) + 4)
 293
 294 #define IE_STAT_COMPL   0x8000  /* command is completed */
 295 #define IE_STAT_BUSY    0x4000  /* command is running now */
 296 #define IE_STAT_OK      0x2000  /* command completed successfully */
 297 #define IE_STAT_ABORT   0x1000  /* command was aborted */
 298
 299 #define IE_CMD_NOP      0x0000  /* NOP */
 300 #define IE_CMD_IASETUP  0x0001  /* initial address setup */
 301 #define IE_CMD_CONFIG   0x0002  /* configure command */
 302 #define IE_CMD_MCAST    0x0003  /* multicast setup command */
 303 #define IE_CMD_XMIT     0x0004  /* transmit command */
 304 #define IE_CMD_TDR      0x0005  /* time-domain reflectometer command */
 305 #define IE_CMD_DUMP     0x0006  /* dump command */
 306 #define IE_CMD_DIAGNOSE 0x0007  /* diagnostics command */
 307
 308 #define IE_CMD_LAST     0x8000  /* this is the last command in the list */
 309 #define IE_CMD_SUSPEND  0x4000  /* suspend CU after this command */
 310 #define IE_CMD_INTR     0x2000  /* post an interrupt after completion */
 311
 312 /*
 313  * No-op commands; just like COMMON but "indexable"
 314  */
 315 #define IE_CMD_NOP_SZ                   IE_CMD_COMMON_SZ
 316 #define IE_CMD_NOP_ADDR(base,i)         ((base) + (i) * IE_CMD_NOP_SZ)
 317 #define IE_CMD_NOP_STATUS(b,i)          (IE_CMD_NOP_ADDR(b,i) + 0)
 318 #define IE_CMD_NOP_CMD(b,i)             (IE_CMD_NOP_ADDR(b,i) + 2)
 319 #define IE_CMD_NOP_LINK(b,i)            (IE_CMD_NOP_ADDR(b,i) + 4)
 320
 321
 322 /*
 323  * This is the command to transmit a frame.
 324  *-
 325 struct __ie_xmit_cmd {
 326         struct __ie_cmd_common  com;            // common part
 327 #define __ie_xmit_status        com.ie_cmd_status
 328
 329         u_int16_t       ie_xmit_desc;           // pointer to buffer descriptor
 330         struct __ie_en_addr ie_xmit_addr;       // destination address
 331         u_int16_t       ie_xmit_length;         // 802.3 length/Ether type field
 332 };
 333  */
 334 #define IE_CMD_XMIT_SZ                  (IE_CMD_COMMON_SZ + 10)
 335 #define IE_CMD_XMIT_ADDR(base,i)        ((base) + (i) * IE_CMD_XMIT_SZ)
 336 #define IE_CMD_XMIT_STATUS(b,i)         \
 337         (IE_CMD_XMIT_ADDR(b,i) + 0)     /* == CMD_COMMON_STATUS */
 338 #define IE_CMD_XMIT_CMD(b,i)            \
 339         (IE_CMD_XMIT_ADDR(b,i) + 2)     /* == CMD_COMMON_CMD */
 340 #define IE_CMD_XMIT_LINK(b,i)           \
 341         (IE_CMD_XMIT_ADDR(b,i) + 4)     /* == CMD_COMMON_LINK */
 342 #define IE_CMD_XMIT_DESC(b,i)           \
 343         (IE_CMD_XMIT_ADDR(b,i) + IE_CMD_COMMON_SZ + 0)
 344 #define IE_CMD_XMIT_EADDR(b,i)          \
 345         (IE_CMD_XMIT_ADDR(b,i) + IE_CMD_COMMON_SZ + 2)
 346 #define IE_CMD_XMIT_LEN(b,i)            \
 347         (IE_CMD_XMIT_ADDR(b,i) + IE_CMD_COMMON_SZ + 8)
 348
 349 #define IE_XS_MAXCOLL   0x000f  /* number of collisions during transmit */
 350 #define IE_XS_EXCMAX    0x0020  /* exceeded maximum number of collisions */
 351 #define IE_XS_SQE       0x0040  /* SQE positive */
 352 #define IE_XS_DEFERRED  0x0080  /* transmission deferred */
 353 #define IE_XS_UNDERRUN  0x0100  /* DMA underrun */
 354 #define IE_XS_LOSTCTS   0x0200  /* Lost CTS */
 355 #define IE_XS_NOCARRIER 0x0400  /* No Carrier */
 356 #define IE_XS_LATECOLL  0x0800  /* Late collision */
 357
 358 /*
 359  * This is a buffer descriptor for a frame to be transmitted.
 360  *-
 361 struct __ie_xmit_buf {
 362         u_int16_t ie_xmit_flags;        // see below
 363         u_int16_t ie_xmit_next;         // 16-pointer to next desc
 364         void *ie_xmit_buf;              // 24-pointer to the actual buffer
 365 };
 366  */
 367 #define IE_XBD_SZ                       8
 368 #define IE_XBD_ADDR(base,i)             ((base) + (i) * IE_XBD_SZ)
 369 #define IE_XBD_FLAGS(b,i)               (IE_XBD_ADDR(b,i) + 0)
 370 #define IE_XBD_NEXT(b,i)                (IE_XBD_ADDR(b,i) + 2)
 371 #define IE_XBD_BUF(b,i)                 (IE_XBD_ADDR(b,i) + 4)
 372
 373 #define IE_TBD_EOL      0x8000          /* this TBD is the last one */
 374 #define IE_TBD_CNTMASK  0x3fff          /* The rest of the `flags' word
 375                                            is actually the length. */
 376
 377
 378 /*
 379  * Multicast setup command.
 380  *-
 381 struct __ie_mcast_cmd {
 382         struct __ie_cmd_common  com;    // common part
 383 #define ie_mcast_status         com.ie_cmd_status
 384
 385         // size (in bytes) of multicast addresses
 386         u_short         ie_mcast_bytes;
 387         struct __ie_en_addr ie_mcast_addrs[IE_MAXMCAST + 1];// space for them
 388 };
 389  */
 390 #define IE_CMD_MCAST_SZ                 (IE_CMD_COMMON_SZ + 2 /* + XXX */)
 391 #define IE_CMD_MCAST_BYTES(base)        ((base) + IE_CMD_COMMON_SZ + 0)
 392 #define IE_CMD_MCAST_MADDR(base)        ((base) + IE_CMD_COMMON_SZ + 2)
 393
 394 /*
 395  * Time Domain Reflectometer command.
 396  *-
 397 struct __ie_tdr_cmd {
 398         struct __ie_cmd_common com;     // common part
 399 #define ie_tdr_status com.ie_cmd_status
 400         u_short ie_tdr_time;            // error bits and time
 401 };
 402  */
 403 #define IE_CMD_TDR_SZ           (IE_CMD_COMMON_SZ + 2)
 404 #define IE_CMD_TDR_TIME(base)   ((base) + IE_CMD_COMMON_SZ + 0)
 405
 406 #define IE_TDR_SUCCESS  0x8000  /* TDR succeeded without error */
 407 #define IE_TDR_XCVR     0x4000  /* detected a transceiver problem */
 408 #define IE_TDR_OPEN     0x2000  /* detected an incorrect termination ("open") */
 409 #define IE_TDR_SHORT    0x1000  /* TDR detected a short circuit */
 410 #define IE_TDR_TIME     0x07ff  /* mask for reflection time */
 411
 412 /*
 413  * Initial Address Setup command
 414  *-
 415 struct __ie_iasetup_cmd {
 416         struct __ie_cmd_common com;
 417 #define ie_iasetup_status com.ie_cmd_status
 418         struct __ie_en_addr ie_address;
 419 };
 420  */
 421 #define IE_CMD_IAS_SZ           (IE_CMD_COMMON_SZ + 6)
 422 #define IE_CMD_IAS_EADDR(base)  ((base) + IE_CMD_COMMON_SZ + 0)
 423
 424 /*
 425  * Configuration command
 426  *-
 427 struct __ie_config_cmd {
 428         struct __ie_cmd_common com;     // common part
 429 #define ie_config_status com.ie_cmd_status
 430
 431         u_int8_t ie_config_count;       // byte count (0x0c)
 432         u_int8_t ie_fifo;               // fifo (8)
 433         u_int8_t ie_save_bad;           // save bad frames (0x40)
 434         u_int8_t ie_addr_len;           // address length (0x2e) (AL-LOC == 1)
 435         u_int8_t ie_priority;           // priority and backoff (0x0)
 436         u_int8_t ie_ifs;                // inter-frame spacing (0x60)
 437         u_int8_t ie_slot_low;           // slot time, LSB (0x0)
 438         u_int8_t ie_slot_high;          // slot time, MSN, and retries (0xf2)
 439         u_int8_t ie_promisc;            // 1 if promiscuous, else 0
 440         u_int8_t ie_crs_cdt;            // CSMA/CD parameters (0x0)
 441         u_int8_t ie_min_len;            // min frame length (0x40)
 442         u_int8_t ie_junk;               // stuff for 82596 (0xff)
 443 };
 444  */
 445 #define IE_CMD_CFG_SZ                   (IE_CMD_COMMON_SZ + 12)
 446 #define IE_CMD_CFG_CNT(base)            ((base) + IE_CMD_COMMON_SZ + 0)
 447 #define IE_CMD_CFG_FIFO(base)           ((base) + IE_CMD_COMMON_SZ + 1)
 448 #define IE_CMD_CFG_SAVEBAD(base)        ((base) + IE_CMD_COMMON_SZ + 2)
 449 #define IE_CMD_CFG_ADDRLEN(base)        ((base) + IE_CMD_COMMON_SZ + 3)
 450 #define IE_CMD_CFG_PRIORITY(base)       ((base) + IE_CMD_COMMON_SZ + 4)
 451 #define IE_CMD_CFG_IFS(base)            ((base) + IE_CMD_COMMON_SZ + 5)
 452 #define IE_CMD_CFG_SLOT_LOW(base)       ((base) + IE_CMD_COMMON_SZ + 6)
 453 #define IE_CMD_CFG_SLOT_HIGH(base)      ((base) + IE_CMD_COMMON_SZ + 7)
 454 #define IE_CMD_CFG_PROMISC(base)        ((base) + IE_CMD_COMMON_SZ + 8)
 455 #define IE_CMD_CFG_CRSCDT(base)         ((base) + IE_CMD_COMMON_SZ + 9)
 456 #define IE_CMD_CFG_MINLEN(base)         ((base) + IE_CMD_COMMON_SZ + 10)
 457 #define IE_CMD_CFG_JUNK(base)           ((base) + IE_CMD_COMMON_SZ + 11)