?  search:
summary | log | graphiclog1 | graphiclog2 | commit | commitdiff | tree | refs | edit | fork
blame | history | raw | HEAD
Sync usage with man page.
[netbsd-mini2440.git] / sys / dev / ic / tulip.c
blob200393a7e0b2b6f70a609d01529d864f287fa38d
1 /* $NetBSD: tulip.c,v 1.172 2009/09/05 14:19:30 tsutsui Exp $ */
2
3 /*-
4 * Copyright (c) 1998, 1999, 2000, 2002 The NetBSD Foundation, Inc.
5 * All rights reserved.
6 *
7 * This code is derived from software contributed to The NetBSD Foundation
8 * by Jason R. Thorpe of the Numerical Aerospace Simulation Facility,
9 * NASA Ames Research Center; and by Charles M. Hannum.
10 *
11 * Redistribution and use in source and binary forms, with or without
12 * modification, are permitted provided that the following conditions
13 * are met:
14 * 1. Redistributions of source code must retain the above copyright
15 * notice, this list of conditions and the following disclaimer.
16 * 2. Redistributions in binary form must reproduce the above copyright
17 * notice, this list of conditions and the following disclaimer in the
18 * documentation and/or other materials provided with the distribution.
19 *
20 * THIS SOFTWARE IS PROVIDED BY THE NETBSD FOUNDATION, INC. AND CONTRIBUTORS
21 * ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED
22 * TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
23 * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS
24 * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
25 * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
26 * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
27 * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
28 * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
29 * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
30 * POSSIBILITY OF SUCH DAMAGE.
31 */
32
33 /*
34 * Device driver for the Digital Semiconductor ``Tulip'' (21x4x)
35 * Ethernet controller family, and a variety of clone chips.
36 */
37
38 #include <sys/cdefs.h>
39 __KERNEL_RCSID(0, "$NetBSD: tulip.c,v 1.172 2009/09/05 14:19:30 tsutsui Exp $");
40
41 #include "bpfilter.h"
42
43 #include <sys/param.h>
44 #include <sys/systm.h>
45 #include <sys/callout.h>
46 #include <sys/mbuf.h>
47 #include <sys/malloc.h>
48 #include <sys/kernel.h>
49 #include <sys/socket.h>
50 #include <sys/ioctl.h>
51 #include <sys/errno.h>
52 #include <sys/device.h>
53
54 #include <machine/endian.h>
55
56 #include <uvm/uvm_extern.h>
57
58 #include <net/if.h>
59 #include <net/if_dl.h>
60 #include <net/if_media.h>
61 #include <net/if_ether.h>
62
63 #if NBPFILTER > 0
64 #include <net/bpf.h>
65 #endif
66
67 #include <sys/bus.h>
68 #include <sys/intr.h>
69
70 #include <dev/mii/mii.h>
71 #include <dev/mii/miivar.h>
72 #include <dev/mii/mii_bitbang.h>
73
74 #include <dev/ic/tulipreg.h>
75 #include <dev/ic/tulipvar.h>
76
77 const char * const tlp_chip_names[] = TULIP_CHIP_NAMES;
78
79 static const struct tulip_txthresh_tab tlp_10_txthresh_tab[] =
80 TLP_TXTHRESH_TAB_10;
81
82 static const struct tulip_txthresh_tab tlp_10_100_txthresh_tab[] =
83 TLP_TXTHRESH_TAB_10_100;
84
85 static const struct tulip_txthresh_tab tlp_winb_txthresh_tab[] =
86 TLP_TXTHRESH_TAB_WINB;
87
88 static const struct tulip_txthresh_tab tlp_dm9102_txthresh_tab[] =
89 TLP_TXTHRESH_TAB_DM9102;
90
91 static void tlp_start(struct ifnet *);
92 static void tlp_watchdog(struct ifnet *);
93 static int tlp_ioctl(struct ifnet *, u_long, void *);
94 static int tlp_init(struct ifnet *);
95 static void tlp_stop(struct ifnet *, int);
96 static int tlp_ifflags_cb(struct ethercom *);
97
98 static void tlp_rxdrain(struct tulip_softc *);
99 static int tlp_add_rxbuf(struct tulip_softc *, int);
100 static void tlp_srom_idle(struct tulip_softc *);
101 static int tlp_srom_size(struct tulip_softc *);
102
103 static int tlp_enable(struct tulip_softc *);
104 static void tlp_disable(struct tulip_softc *);
105
106 static void tlp_filter_setup(struct tulip_softc *);
107 static void tlp_winb_filter_setup(struct tulip_softc *);
108 static void tlp_al981_filter_setup(struct tulip_softc *);
109 static void tlp_asix_filter_setup(struct tulip_softc *);
110
111 static void tlp_rxintr(struct tulip_softc *);
112 static void tlp_txintr(struct tulip_softc *);
113
114 static void tlp_mii_tick(void *);
115 static void tlp_mii_statchg(device_t);
116 static void tlp_winb_mii_statchg(device_t);
117 static void tlp_dm9102_mii_statchg(device_t);
118
119 static void tlp_mii_getmedia(struct tulip_softc *, struct ifmediareq *);
120 static int tlp_mii_setmedia(struct tulip_softc *);
121
122 static int tlp_bitbang_mii_readreg(device_t, int, int);
123 static void tlp_bitbang_mii_writereg(device_t, int, int, int);
124
125 static int tlp_pnic_mii_readreg(device_t, int, int);
126 static void tlp_pnic_mii_writereg(device_t, int, int, int);
127
128 static int tlp_al981_mii_readreg(device_t, int, int);
129 static void tlp_al981_mii_writereg(device_t, int, int, int);
130
131 static void tlp_2114x_preinit(struct tulip_softc *);
132 static void tlp_2114x_mii_preinit(struct tulip_softc *);
133 static void tlp_pnic_preinit(struct tulip_softc *);
134 static void tlp_dm9102_preinit(struct tulip_softc *);
135 static void tlp_asix_preinit(struct tulip_softc *);
136
137 static void tlp_21140_reset(struct tulip_softc *);
138 static void tlp_21142_reset(struct tulip_softc *);
139 static void tlp_pmac_reset(struct tulip_softc *);
140 #if 0
141 static void tlp_dm9102_reset(struct tulip_softc *);
142 #endif
143
144 static void tlp_2114x_nway_tick(void *);
145
146 #define tlp_mchash(addr, sz) \
147 (ether_crc32_le((addr), ETHER_ADDR_LEN) & ((sz) - 1))
148
149 /*
150 * MII bit-bang glue.
151 */
152 static uint32_t tlp_sio_mii_bitbang_read(device_t);
153 static void tlp_sio_mii_bitbang_write(device_t, uint32_t);
154
155 static const struct mii_bitbang_ops tlp_sio_mii_bitbang_ops = {
156 tlp_sio_mii_bitbang_read,
157 tlp_sio_mii_bitbang_write,
158 {
159 MIIROM_MDO, /* MII_BIT_MDO */
160 MIIROM_MDI, /* MII_BIT_MDI */
161 MIIROM_MDC, /* MII_BIT_MDC */
162 0, /* MII_BIT_DIR_HOST_PHY */
163 MIIROM_MIIDIR, /* MII_BIT_DIR_PHY_HOST */
164 }
165 };
166
167 #ifdef TLP_DEBUG
168 #define DPRINTF(sc, x) if ((sc)->sc_ethercom.ec_if.if_flags & IFF_DEBUG) \
169 printf x
170 #else
171 #define DPRINTF(sc, x) /* nothing */
172 #endif
173
174 #ifdef TLP_STATS
175 static void tlp_print_stats(struct tulip_softc *);
176 #endif
177
178 /*
179 * Can be used to debug the SROM-related things, including contents.
180 * Initialized so that it's patchable.
181 */
182 int tlp_srom_debug = 0;
183
184 /*
185 * tlp_attach:
186 *
187 * Attach a Tulip interface to the system.
188 */
189 int
190 tlp_attach(struct tulip_softc *sc, const uint8_t *enaddr)
191 {
192 struct ifnet *ifp = &sc->sc_ethercom.ec_if;
193 device_t self = sc->sc_dev;
194 int i, error;
195
196 callout_init(&sc->sc_nway_callout, 0);
197 callout_init(&sc->sc_tick_callout, 0);
198
199 /*
200 * NOTE: WE EXPECT THE FRONT-END TO INITIALIZE sc_regshift!
201 */
202
203 /*
204 * Setup the transmit threshold table.
205 */
206 switch (sc->sc_chip) {
207 case TULIP_CHIP_DE425:
208 case TULIP_CHIP_21040:
209 case TULIP_CHIP_21041:
210 sc->sc_txth = tlp_10_txthresh_tab;
211 break;
212
213 case TULIP_CHIP_DM9102:
214 case TULIP_CHIP_DM9102A:
215 sc->sc_txth = tlp_dm9102_txthresh_tab;
216 break;
217
218 default:
219 sc->sc_txth = tlp_10_100_txthresh_tab;
220 break;
221 }
222
223 /*
224 * Setup the filter setup function.
225 */
226 switch (sc->sc_chip) {
227 case TULIP_CHIP_WB89C840F:
228 sc->sc_filter_setup = tlp_winb_filter_setup;
229 break;
230
231 case TULIP_CHIP_AL981:
232 case TULIP_CHIP_AN983:
233 case TULIP_CHIP_AN985:
234 sc->sc_filter_setup = tlp_al981_filter_setup;
235 break;
236
237 case TULIP_CHIP_AX88140:
238 case TULIP_CHIP_AX88141:
239 sc->sc_filter_setup = tlp_asix_filter_setup;
240 break;
241
242 default:
243 sc->sc_filter_setup = tlp_filter_setup;
244 break;
245 }
246
247 /*
248 * Set up the media status change function.
249 */
250 switch (sc->sc_chip) {
251 case TULIP_CHIP_WB89C840F:
252 sc->sc_statchg = tlp_winb_mii_statchg;
253 break;
254
255 case TULIP_CHIP_DM9102:
256 case TULIP_CHIP_DM9102A:
257 sc->sc_statchg = tlp_dm9102_mii_statchg;
258 break;
259
260 default:
261 /*
262 * We may override this if we have special media
263 * handling requirements (e.g. flipping GPIO pins).
264 *
265 * The pure-MII statchg function covers the basics.
266 */
267 sc->sc_statchg = tlp_mii_statchg;
268 break;
269 }
270
271 /*
272 * Default to no FS|LS in setup packet descriptors. They're
273 * supposed to be zero according to the 21040 and 21143
274 * manuals, and some chips fall over badly if they're
275 * included. Yet, other chips seem to require them. Sigh.
276 */
277 switch (sc->sc_chip) {
278 case TULIP_CHIP_X3201_3:
279 sc->sc_setup_fsls = TDCTL_Tx_FS|TDCTL_Tx_LS;
280 break;
281
282 default:
283 sc->sc_setup_fsls = 0;
284 }
285
286 /*
287 * Set up various chip-specific quirks.
288 *
289 * Note that wherever we can, we use the "ring" option for
290 * transmit and receive descriptors. This is because some
291 * clone chips apparently have problems when using chaining,
292 * although some *only* support chaining.
293 *
294 * What we do is always program the "next" pointer, and then
295 * conditionally set the TDCTL_CH and TDCTL_ER bits in the
296 * appropriate places.
297 */
298 switch (sc->sc_chip) {
299 case TULIP_CHIP_21140:
300 case TULIP_CHIP_21140A:
301 case TULIP_CHIP_21142:
302 case TULIP_CHIP_21143:
303 case TULIP_CHIP_82C115: /* 21143-like */
304 case TULIP_CHIP_MX98713: /* 21140-like */
305 case TULIP_CHIP_MX98713A: /* 21143-like */
306 case TULIP_CHIP_MX98715: /* 21143-like */
307 case TULIP_CHIP_MX98715A: /* 21143-like */
308 case TULIP_CHIP_MX98715AEC_X: /* 21143-like */
309 case TULIP_CHIP_MX98725: /* 21143-like */
310 case TULIP_CHIP_RS7112: /* 21143-like */
311 /*
312 * Run these chips in ring mode.
313 */
314 sc->sc_tdctl_ch = 0;
315 sc->sc_tdctl_er = TDCTL_ER;
316 sc->sc_preinit = tlp_2114x_preinit;
317 break;
318
319 case TULIP_CHIP_82C168:
320 case TULIP_CHIP_82C169:
321 /*
322 * Run these chips in ring mode.
323 */
324 sc->sc_tdctl_ch = 0;
325 sc->sc_tdctl_er = TDCTL_ER;
326 sc->sc_preinit = tlp_pnic_preinit;
327
328 /*
329 * These chips seem to have busted DMA engines; just put them
330 * in Store-and-Forward mode from the get-go.
331 */
332 sc->sc_txthresh = TXTH_SF;
333 break;
334
335 case TULIP_CHIP_WB89C840F:
336 /*
337 * Run this chip in chained mode.
338 */
339 sc->sc_tdctl_ch = TDCTL_CH;
340 sc->sc_tdctl_er = 0;
341 sc->sc_flags |= TULIPF_IC_FS;
342 break;
343
344 case TULIP_CHIP_DM9102:
345 case TULIP_CHIP_DM9102A:
346 /*
347 * Run these chips in chained mode.
348 */
349 sc->sc_tdctl_ch = TDCTL_CH;
350 sc->sc_tdctl_er = 0;
351 sc->sc_preinit = tlp_dm9102_preinit;
352
353 /*
354 * These chips have a broken bus interface, so we
355 * can't use any optimized bus commands. For this
356 * reason, we tend to underrun pretty quickly, so
357 * just to Store-and-Forward mode from the get-go.
358 */
359 sc->sc_txthresh = TXTH_DM9102_SF;
360 break;
361
362 case TULIP_CHIP_AX88140:
363 case TULIP_CHIP_AX88141:
364 /*
365 * Run these chips in ring mode.
366 */
367 sc->sc_tdctl_ch = 0;
368 sc->sc_tdctl_er = TDCTL_ER;
369 sc->sc_preinit = tlp_asix_preinit;
370 break;
371
372 default:
373 /*
374 * Default to running in ring mode.
375 */
376 sc->sc_tdctl_ch = 0;
377 sc->sc_tdctl_er = TDCTL_ER;
378 }
379
380 /*
381 * Set up the MII bit-bang operations.
382 */
383 switch (sc->sc_chip) {
384 case TULIP_CHIP_WB89C840F: /* XXX direction bit different? */
385 sc->sc_bitbang_ops = &tlp_sio_mii_bitbang_ops;
386 break;
387
388 default:
389 sc->sc_bitbang_ops = &tlp_sio_mii_bitbang_ops;
390 }
391
392 SIMPLEQ_INIT(&sc->sc_txfreeq);
393 SIMPLEQ_INIT(&sc->sc_txdirtyq);
394
395 /*
396 * Allocate the control data structures, and create and load the
397 * DMA map for it.
398 */
399 if ((error = bus_dmamem_alloc(sc->sc_dmat,
400 sizeof(struct tulip_control_data), PAGE_SIZE, 0, &sc->sc_cdseg,
401 1, &sc->sc_cdnseg, 0)) != 0) {
402 aprint_error_dev(self, "unable to allocate control data, error = %d\n",
403 error);
404 goto fail_0;
405 }
406
407 if ((error = bus_dmamem_map(sc->sc_dmat, &sc->sc_cdseg, sc->sc_cdnseg,
408 sizeof(struct tulip_control_data), (void **)&sc->sc_control_data,
409 BUS_DMA_COHERENT)) != 0) {
410 aprint_error_dev(self, "unable to map control data, error = %d\n",
411 error);
412 goto fail_1;
413 }
414
415 if ((error = bus_dmamap_create(sc->sc_dmat,
416 sizeof(struct tulip_control_data), 1,
417 sizeof(struct tulip_control_data), 0, 0, &sc->sc_cddmamap)) != 0) {
418 sc->sc_cddmamap = NULL;
419 aprint_error_dev(self, "unable to create control data DMA map, "
420 "error = %d\n", error);
421 goto fail_2;
422 }
423
424 if ((error = bus_dmamap_load(sc->sc_dmat, sc->sc_cddmamap,
425 sc->sc_control_data, sizeof(struct tulip_control_data), NULL,
426 0)) != 0) {
427 aprint_error_dev(self, "unable to load control data DMA map, error = %d\n",
428 error);
429 goto fail_3;
430 }
431
432 /*
433 * Create the transmit buffer DMA maps.
434 *
435 * Note that on the Xircom clone, transmit buffers must be
436 * 4-byte aligned. We're almost guaranteed to have to copy
437 * the packet in that case, so we just limit ourselves to
438 * one segment.
439 *
440 * On the DM9102, the transmit logic can only handle one
441 * DMA segment.
442 */
443 switch (sc->sc_chip) {
444 case TULIP_CHIP_X3201_3:
445 case TULIP_CHIP_DM9102:
446 case TULIP_CHIP_DM9102A:
447 case TULIP_CHIP_AX88140:
448 case TULIP_CHIP_AX88141:
449 sc->sc_ntxsegs = 1;
450 break;
451
452 default:
453 sc->sc_ntxsegs = TULIP_NTXSEGS;
454 }
455 for (i = 0; i < TULIP_TXQUEUELEN; i++) {
456 if ((error = bus_dmamap_create(sc->sc_dmat, MCLBYTES,
457 sc->sc_ntxsegs, MCLBYTES, 0, 0,
458 &sc->sc_txsoft[i].txs_dmamap)) != 0) {
459 sc->sc_txsoft[i].txs_dmamap = NULL;
460 aprint_error_dev(self, "unable to create tx DMA map %d, "
461 "error = %d\n", i, error);
462 goto fail_4;
463 }
464 }
465
466 /*
467 * Create the receive buffer DMA maps.
468 */
469 for (i = 0; i < TULIP_NRXDESC; i++) {
470 if ((error = bus_dmamap_create(sc->sc_dmat, MCLBYTES, 1,
471 MCLBYTES, 0, 0, &sc->sc_rxsoft[i].rxs_dmamap)) != 0) {
472 sc->sc_rxsoft[i].rxs_dmamap = NULL;
473 aprint_error_dev(self, "unable to create rx DMA map %d, "
474 "error = %d\n", i, error);
475 goto fail_5;
476 }
477 sc->sc_rxsoft[i].rxs_mbuf = NULL;
478 }
479
480 /*
481 * From this point forward, the attachment cannot fail. A failure
482 * before this point releases all resources that may have been
483 * allocated.
484 */
485 sc->sc_flags |= TULIPF_ATTACHED;
486
487 /*
488 * Reset the chip to a known state.
489 */
490 tlp_reset(sc);
491
492 /* Announce ourselves. */
493 aprint_normal_dev(self, "%s%sEthernet address %s\n",
494 sc->sc_name[0] != '\0' ? sc->sc_name : "",
495 sc->sc_name[0] != '\0' ? ", " : "",
496 ether_sprintf(enaddr));
497
498 /*
499 * Check to see if we're the simulated Ethernet on Connectix
500 * Virtual PC.
501 */
502 if (enaddr[0] == 0x00 && enaddr[1] == 0x03 && enaddr[2] == 0xff)
503 sc->sc_flags |= TULIPF_VPC;
504
505 /*
506 * Initialize our media structures. This may probe the MII, if
507 * present.
508 */
509 (*sc->sc_mediasw->tmsw_init)(sc);
510
511 strlcpy(ifp->if_xname, device_xname(self), IFNAMSIZ);
512 ifp->if_softc = sc;
513 ifp->if_flags = IFF_BROADCAST | IFF_SIMPLEX | IFF_MULTICAST;
514 sc->sc_if_flags = ifp->if_flags;
515 ifp->if_ioctl = tlp_ioctl;
516 ifp->if_start = tlp_start;
517 ifp->if_watchdog = tlp_watchdog;
518 ifp->if_init = tlp_init;
519 ifp->if_stop = tlp_stop;
520 IFQ_SET_READY(&ifp->if_snd);
521
522 /*
523 * We can support 802.1Q VLAN-sized frames.
524 */
525 sc->sc_ethercom.ec_capabilities |= ETHERCAP_VLAN_MTU;
526
527 /*
528 * Attach the interface.
529 */
530 if_attach(ifp);
531 ether_ifattach(ifp, enaddr);
532 ether_set_ifflags_cb(&sc->sc_ethercom, tlp_ifflags_cb);
533 #if NRND > 0
534 rnd_attach_source(&sc->sc_rnd_source, device_xname(self),
535 RND_TYPE_NET, 0);
536 #endif
537
538 if (pmf_device_register(self, NULL, NULL))
539 pmf_class_network_register(self, ifp);
540 else
541 aprint_error_dev(self, "couldn't establish power handler\n");
542
543 return 0;
544
545 /*
546 * Free any resources we've allocated during the failed attach
547 * attempt. Do this in reverse order and fall through.
548 */
549 fail_5:
550 for (i = 0; i < TULIP_NRXDESC; i++) {
551 if (sc->sc_rxsoft[i].rxs_dmamap != NULL)
552 bus_dmamap_destroy(sc->sc_dmat,
553 sc->sc_rxsoft[i].rxs_dmamap);
554 }
555 fail_4:
556 for (i = 0; i < TULIP_TXQUEUELEN; i++) {
557 if (sc->sc_txsoft[i].txs_dmamap != NULL)
558 bus_dmamap_destroy(sc->sc_dmat,
559 sc->sc_txsoft[i].txs_dmamap);
560 }
561 bus_dmamap_unload(sc->sc_dmat, sc->sc_cddmamap);
562 fail_3:
563 bus_dmamap_destroy(sc->sc_dmat, sc->sc_cddmamap);
564 fail_2:
565 bus_dmamem_unmap(sc->sc_dmat, (void *)sc->sc_control_data,
566 sizeof(struct tulip_control_data));
567 fail_1:
568 bus_dmamem_free(sc->sc_dmat, &sc->sc_cdseg, sc->sc_cdnseg);
569 fail_0:
570 return error;
571 }
572
573 /*
574 * tlp_activate:
575 *
576 * Handle device activation/deactivation requests.
577 */
578 int
579 tlp_activate(device_t self, enum devact act)
580 {
581 struct tulip_softc *sc = device_private(self);
582
583 switch (act) {
584 case DVACT_DEACTIVATE:
585 if_deactivate(&sc->sc_ethercom.ec_if);
586 return 0;
587 default:
588 return EOPNOTSUPP;
589 }
590 }
591
592 /*
593 * tlp_detach:
594 *
595 * Detach a Tulip interface.
596 */
597 int
598 tlp_detach(struct tulip_softc *sc)
599 {
600 struct ifnet *ifp = &sc->sc_ethercom.ec_if;
601 struct tulip_rxsoft *rxs;
602 struct tulip_txsoft *txs;
603 device_t self = sc->sc_dev;
604 int i;
605
606 /*
607 * Succeed now if there isn't any work to do.
608 */
609 if ((sc->sc_flags & TULIPF_ATTACHED) == 0)
610 return (0);
611
612 /* Unhook our tick handler. */
613 if (sc->sc_tick)
614 callout_stop(&sc->sc_tick_callout);
615
616 if (sc->sc_flags & TULIPF_HAS_MII) {
617 /* Detach all PHYs */
618 mii_detach(&sc->sc_mii, MII_PHY_ANY, MII_OFFSET_ANY);
619 }
620
621 /* Delete all remaining media. */
622 ifmedia_delete_instance(&sc->sc_mii.mii_media, IFM_INST_ANY);
623
624 #if NRND > 0
625 rnd_detach_source(&sc->sc_rnd_source);
626 #endif
627 ether_ifdetach(ifp);
628 if_detach(ifp);
629
630 for (i = 0; i < TULIP_NRXDESC; i++) {
631 rxs = &sc->sc_rxsoft[i];
632 if (rxs->rxs_mbuf != NULL) {
633 bus_dmamap_unload(sc->sc_dmat, rxs->rxs_dmamap);
634 m_freem(rxs->rxs_mbuf);
635 rxs->rxs_mbuf = NULL;
636 }
637 bus_dmamap_destroy(sc->sc_dmat, rxs->rxs_dmamap);
638 }
639 for (i = 0; i < TULIP_TXQUEUELEN; i++) {
640 txs = &sc->sc_txsoft[i];
641 if (txs->txs_mbuf != NULL) {
642 bus_dmamap_unload(sc->sc_dmat, txs->txs_dmamap);
643 m_freem(txs->txs_mbuf);
644 txs->txs_mbuf = NULL;
645 }
646 bus_dmamap_destroy(sc->sc_dmat, txs->txs_dmamap);
647 }
648 bus_dmamap_unload(sc->sc_dmat, sc->sc_cddmamap);
649 bus_dmamap_destroy(sc->sc_dmat, sc->sc_cddmamap);
650 bus_dmamem_unmap(sc->sc_dmat, (void *)sc->sc_control_data,
651 sizeof(struct tulip_control_data));
652 bus_dmamem_free(sc->sc_dmat, &sc->sc_cdseg, sc->sc_cdnseg);
653
654 pmf_device_deregister(self);
655
656 if (sc->sc_srom)
657 free(sc->sc_srom, M_DEVBUF);
658
659 return (0);
660 }
661
662 /*
663 * tlp_start: [ifnet interface function]
664 *
665 * Start packet transmission on the interface.
666 */
667 static void
668 tlp_start(struct ifnet *ifp)
669 {
670 struct tulip_softc *sc = ifp->if_softc;
671 struct mbuf *m0, *m;
672 struct tulip_txsoft *txs, *last_txs = NULL;
673 bus_dmamap_t dmamap;
674 int error, firsttx, nexttx, lasttx = 1, ofree, seg;
675
676 DPRINTF(sc, ("%s: tlp_start: sc_flags 0x%08x, if_flags 0x%08x\n",
677 device_xname(sc->sc_dev), sc->sc_flags, ifp->if_flags));
678
679 /*
680 * If we want a filter setup, it means no more descriptors were
681 * available for the setup routine. Let it get a chance to wedge
682 * itself into the ring.
683 */
684 if (sc->sc_flags & TULIPF_WANT_SETUP)
685 ifp->if_flags |= IFF_OACTIVE;
686
687 if ((ifp->if_flags & (IFF_RUNNING|IFF_OACTIVE)) != IFF_RUNNING)
688 return;
689
690 if (sc->sc_tick == tlp_2114x_nway_tick &&
691 (sc->sc_flags & TULIPF_LINK_UP) == 0 && ifp->if_snd.ifq_len < 10)
692 return;
693
694 /*
695 * Remember the previous number of free descriptors and
696 * the first descriptor we'll use.
697 */
698 ofree = sc->sc_txfree;
699 firsttx = sc->sc_txnext;
700
701 DPRINTF(sc, ("%s: tlp_start: txfree %d, txnext %d\n",
702 device_xname(sc->sc_dev), ofree, firsttx));
703
704 /*
705 * Loop through the send queue, setting up transmit descriptors
706 * until we drain the queue, or use up all available transmit
707 * descriptors.
708 */
709 while ((txs = SIMPLEQ_FIRST(&sc->sc_txfreeq)) != NULL &&
710 sc->sc_txfree != 0) {
711 /*
712 * Grab a packet off the queue.
713 */
714 IFQ_POLL(&ifp->if_snd, m0);
715 if (m0 == NULL)
716 break;
717 m = NULL;
718
719 dmamap = txs->txs_dmamap;
720
721 /*
722 * Load the DMA map. If this fails, the packet either
723 * didn't fit in the alloted number of segments, or we were
724 * short on resources. In this case, we'll copy and try
725 * again.
726 *
727 * Note that if we're only allowed 1 Tx segment, we
728 * have an alignment restriction. Do this test before
729 * attempting to load the DMA map, because it's more
730 * likely we'll trip the alignment test than the
731 * more-than-one-segment test.
732 */
733 if ((sc->sc_ntxsegs == 1 && (mtod(m0, uintptr_t) & 3) != 0) ||
734 bus_dmamap_load_mbuf(sc->sc_dmat, dmamap, m0,
735 BUS_DMA_WRITE|BUS_DMA_NOWAIT) != 0) {
736 MGETHDR(m, M_DONTWAIT, MT_DATA);
737 if (m == NULL) {
738 aprint_error_dev(sc->sc_dev, "unable to allocate Tx mbuf\n");
739 break;
740 }
741 MCLAIM(m, &sc->sc_ethercom.ec_tx_mowner);
742 if (m0->m_pkthdr.len > MHLEN) {
743 MCLGET(m, M_DONTWAIT);
744 if ((m->m_flags & M_EXT) == 0) {
745 aprint_error_dev(sc->sc_dev,
746 "unable to allocate Tx cluster\n");
747 m_freem(m);
748 break;
749 }
750 }
751 m_copydata(m0, 0, m0->m_pkthdr.len, mtod(m, void *));
752 m->m_pkthdr.len = m->m_len = m0->m_pkthdr.len;
753 error = bus_dmamap_load_mbuf(sc->sc_dmat, dmamap,
754 m, BUS_DMA_WRITE|BUS_DMA_NOWAIT);
755 if (error) {
756 aprint_error_dev(sc->sc_dev,
757 "unable to load Tx buffer, error = %d",
758 error);
759 break;
760 }
761 }
762
763 /*
764 * Ensure we have enough descriptors free to describe
765 * the packet.
766 */
767 if (dmamap->dm_nsegs > sc->sc_txfree) {
768 /*
769 * Not enough free descriptors to transmit this
770 * packet. We haven't committed to anything yet,
771 * so just unload the DMA map, put the packet
772 * back on the queue, and punt. Notify the upper
773 * layer that there are no more slots left.
774 *
775 * XXX We could allocate an mbuf and copy, but
776 * XXX it is worth it?
777 */
778 ifp->if_flags |= IFF_OACTIVE;
779 bus_dmamap_unload(sc->sc_dmat, dmamap);
780 if (m != NULL)
781 m_freem(m);
782 break;
783 }
784
785 IFQ_DEQUEUE(&ifp->if_snd, m0);
786 if (m != NULL) {
787 m_freem(m0);
788 m0 = m;
789 }
790
791 /*
792 * WE ARE NOW COMMITTED TO TRANSMITTING THE PACKET.
793 */
794
795 /* Sync the DMA map. */
796 bus_dmamap_sync(sc->sc_dmat, dmamap, 0, dmamap->dm_mapsize,
797 BUS_DMASYNC_PREWRITE);
798
799 /*
800 * Initialize the transmit descriptors.
801 */
802 for (nexttx = sc->sc_txnext, seg = 0;
803 seg < dmamap->dm_nsegs;
804 seg++, nexttx = TULIP_NEXTTX(nexttx)) {
805 /*
806 * If this is the first descriptor we're
807 * enqueueing, don't set the OWN bit just
808 * yet. That could cause a race condition.
809 * We'll do it below.
810 */
811 sc->sc_txdescs[nexttx].td_status =
812 (nexttx == firsttx) ? 0 : htole32(TDSTAT_OWN);
813 sc->sc_txdescs[nexttx].td_bufaddr1 =
814 htole32(dmamap->dm_segs[seg].ds_addr);
815 sc->sc_txdescs[nexttx].td_ctl =
816 htole32((dmamap->dm_segs[seg].ds_len <<
817 TDCTL_SIZE1_SHIFT) | sc->sc_tdctl_ch |
818 (nexttx == (TULIP_NTXDESC - 1) ?
819 sc->sc_tdctl_er : 0));
820 lasttx = nexttx;
821 }
822
823 KASSERT(lasttx != -1);
824
825 /* Set `first segment' and `last segment' appropriately. */
826 sc->sc_txdescs[sc->sc_txnext].td_ctl |= htole32(TDCTL_Tx_FS);
827 sc->sc_txdescs[lasttx].td_ctl |= htole32(TDCTL_Tx_LS);
828
829 #ifdef TLP_DEBUG
830 if (ifp->if_flags & IFF_DEBUG) {
831 printf(" txsoft %p transmit chain:\n", txs);
832 for (seg = sc->sc_txnext;; seg = TULIP_NEXTTX(seg)) {
833 printf(" descriptor %d:\n", seg);
834 printf(" td_status: 0x%08x\n",
835 le32toh(sc->sc_txdescs[seg].td_status));
836 printf(" td_ctl: 0x%08x\n",
837 le32toh(sc->sc_txdescs[seg].td_ctl));
838 printf(" td_bufaddr1: 0x%08x\n",
839 le32toh(sc->sc_txdescs[seg].td_bufaddr1));
840 printf(" td_bufaddr2: 0x%08x\n",
841 le32toh(sc->sc_txdescs[seg].td_bufaddr2));
842 if (seg == lasttx)
843 break;
844 }
845 }
846 #endif
847
848 /* Sync the descriptors we're using. */
849 TULIP_CDTXSYNC(sc, sc->sc_txnext, dmamap->dm_nsegs,
850 BUS_DMASYNC_PREREAD|BUS_DMASYNC_PREWRITE);
851
852 /*
853 * Store a pointer to the packet so we can free it later,
854 * and remember what txdirty will be once the packet is
855 * done.
856 */
857 txs->txs_mbuf = m0;
858 txs->txs_firstdesc = sc->sc_txnext;
859 txs->txs_lastdesc = lasttx;
860 txs->txs_ndescs = dmamap->dm_nsegs;
861
862 /* Advance the tx pointer. */
863 sc->sc_txfree -= dmamap->dm_nsegs;
864 sc->sc_txnext = nexttx;
865
866 SIMPLEQ_REMOVE_HEAD(&sc->sc_txfreeq, txs_q);
867 SIMPLEQ_INSERT_TAIL(&sc->sc_txdirtyq, txs, txs_q);
868
869 last_txs = txs;
870
871 #if NBPFILTER > 0
872 /*
873 * Pass the packet to any BPF listeners.
874 */
875 if (ifp->if_bpf)
876 bpf_mtap(ifp->if_bpf, m0);
877 #endif /* NBPFILTER > 0 */
878 }
879
880 if (txs == NULL || sc->sc_txfree == 0) {
881 /* No more slots left; notify upper layer. */
882 ifp->if_flags |= IFF_OACTIVE;
883 }
884
885 if (sc->sc_txfree != ofree) {
886 DPRINTF(sc, ("%s: packets enqueued, IC on %d, OWN on %d\n",
887 device_xname(sc->sc_dev), lasttx, firsttx));
888 /*
889 * Cause a transmit interrupt to happen on the
890 * last packet we enqueued.
891 */
892 sc->sc_txdescs[lasttx].td_ctl |= htole32(TDCTL_Tx_IC);
893 TULIP_CDTXSYNC(sc, lasttx, 1,
894 BUS_DMASYNC_PREREAD|BUS_DMASYNC_PREWRITE);
895
896 /*
897 * Some clone chips want IC on the *first* segment in
898 * the packet. Appease them.
899 */
900 KASSERT(last_txs != NULL);
901 if ((sc->sc_flags & TULIPF_IC_FS) != 0 &&
902 last_txs->txs_firstdesc != lasttx) {
903 sc->sc_txdescs[last_txs->txs_firstdesc].td_ctl |=
904 htole32(TDCTL_Tx_IC);
905 TULIP_CDTXSYNC(sc, last_txs->txs_firstdesc, 1,
906 BUS_DMASYNC_PREREAD|BUS_DMASYNC_PREWRITE);
907 }
908
909 /*
910 * The entire packet chain is set up. Give the
911 * first descriptor to the chip now.
912 */
913 sc->sc_txdescs[firsttx].td_status |= htole32(TDSTAT_OWN);
914 TULIP_CDTXSYNC(sc, firsttx, 1,
915 BUS_DMASYNC_PREREAD|BUS_DMASYNC_PREWRITE);
916
917 /* Wake up the transmitter. */
918 /* XXX USE AUTOPOLLING? */
919 TULIP_WRITE(sc, CSR_TXPOLL, TXPOLL_TPD);
920
921 /* Set a watchdog timer in case the chip flakes out. */
922 ifp->if_timer = 5;
923 }
924 }
925
926 /*
927 * tlp_watchdog: [ifnet interface function]
928 *
929 * Watchdog timer handler.
930 */
931 static void
932 tlp_watchdog(struct ifnet *ifp)
933 {
934 struct tulip_softc *sc = ifp->if_softc;
935 int doing_setup, doing_transmit;
936
937 doing_setup = (sc->sc_flags & TULIPF_DOING_SETUP);
938 doing_transmit = (! SIMPLEQ_EMPTY(&sc->sc_txdirtyq));
939
940 if (doing_setup && doing_transmit) {
941 printf("%s: filter setup and transmit timeout\n", device_xname(sc->sc_dev));
942 ifp->if_oerrors++;
943 } else if (doing_transmit) {
944 printf("%s: transmit timeout\n", device_xname(sc->sc_dev));
945 ifp->if_oerrors++;
946 } else if (doing_setup)
947 printf("%s: filter setup timeout\n", device_xname(sc->sc_dev));
948 else
949 printf("%s: spurious watchdog timeout\n", device_xname(sc->sc_dev));
950
951 (void) tlp_init(ifp);
952
953 /* Try to get more packets going. */
954 tlp_start(ifp);
955 }
956
957 /* If the interface is up and running, only modify the receive
958 * filter when setting promiscuous or debug mode. Otherwise fall
959 * through to ether_ioctl, which will reset the chip.
960 */
961 static int
962 tlp_ifflags_cb(struct ethercom *ec)
963 {
964 struct ifnet *ifp = &ec->ec_if;
965 struct tulip_softc *sc = ifp->if_softc;
966 int change = ifp->if_flags ^ sc->sc_if_flags;
967
968 if ((change & ~(IFF_CANTCHANGE|IFF_DEBUG)) != 0)
969 return ENETRESET;
970 if ((change & IFF_PROMISC) != 0)
971 (*sc->sc_filter_setup)(sc);
972 return 0;
973 }
974
975 /*
976 * tlp_ioctl: [ifnet interface function]
977 *
978 * Handle control requests from the operator.
979 */
980 static int
981 tlp_ioctl(struct ifnet *ifp, u_long cmd, void *data)
982 {
983 struct tulip_softc *sc = ifp->if_softc;
984 struct ifreq *ifr = (struct ifreq *)data;
985 int s, error;
986
987 s = splnet();
988
989 switch (cmd) {
990 case SIOCSIFMEDIA:
991 case SIOCGIFMEDIA:
992 error = ifmedia_ioctl(ifp, ifr, &sc->sc_mii.mii_media, cmd);
993 break;
994 default:
995 error = ether_ioctl(ifp, cmd, data);
996 if (error == ENETRESET) {
997 if (ifp->if_flags & IFF_RUNNING) {
998 /*
999 * Multicast list has changed. Set the
1000 * hardware filter accordingly.
1001 */
1002 (*sc->sc_filter_setup)(sc);
1003 }
1004 error = 0;
1005 }
1006 break;
1007 }
1008
1009 /* Try to get more packets going. */
1010 if (TULIP_IS_ENABLED(sc))
1011 tlp_start(ifp);
1012
1013 sc->sc_if_flags = ifp->if_flags;
1014 splx(s);
1015 return (error);
1016 }
1017
1018 /*
1019 * tlp_intr:
1020 *
1021 * Interrupt service routine.
1022 */
1023 int
1024 tlp_intr(void *arg)
1025 {
1026 struct tulip_softc *sc = arg;
1027 struct ifnet *ifp = &sc->sc_ethercom.ec_if;
1028 uint32_t status, rxstatus, txstatus;
1029 int handled = 0, txthresh;
1030
1031 DPRINTF(sc, ("%s: tlp_intr\n", device_xname(sc->sc_dev)));
1032
1033 #ifdef DEBUG
1034 if (TULIP_IS_ENABLED(sc) == 0)
1035 panic("%s: tlp_intr: not enabled", device_xname(sc->sc_dev));
1036 #endif
1037
1038 /*
1039 * If the interface isn't running, the interrupt couldn't
1040 * possibly have come from us.
1041 */
1042 if ((ifp->if_flags & IFF_RUNNING) == 0 ||
1043 !device_is_active(sc->sc_dev))
1044 return (0);
1045
1046 /* Disable interrupts on the DM9102 (interrupt edge bug). */
1047 switch (sc->sc_chip) {
1048 case TULIP_CHIP_DM9102:
1049 case TULIP_CHIP_DM9102A:
1050 TULIP_WRITE(sc, CSR_INTEN, 0);
1051 break;
1052
1053 default:
1054 /* Nothing. */
1055 break;
1056 }
1057
1058 for (;;) {
1059 status = TULIP_READ(sc, CSR_STATUS);
1060 if (status)
1061 TULIP_WRITE(sc, CSR_STATUS, status);
1062
1063 if ((status & sc->sc_inten) == 0)
1064 break;
1065
1066 handled = 1;
1067
1068 rxstatus = status & sc->sc_rxint_mask;
1069 txstatus = status & sc->sc_txint_mask;
1070
1071 if (rxstatus) {
1072 /* Grab new any new packets. */
1073 tlp_rxintr(sc);
1074
1075 if (rxstatus & STATUS_RWT)
1076 printf("%s: receive watchdog timeout\n",
1077 device_xname(sc->sc_dev));
1078
1079 if (rxstatus & STATUS_RU) {
1080 printf("%s: receive ring overrun\n",
1081 device_xname(sc->sc_dev));
1082 /* Get the receive process going again. */
1083 if (sc->sc_tdctl_er != TDCTL_ER) {
1084 tlp_idle(sc, OPMODE_SR);
1085 TULIP_WRITE(sc, CSR_RXLIST,
1086 TULIP_CDRXADDR(sc, sc->sc_rxptr));
1087 TULIP_WRITE(sc, CSR_OPMODE,
1088 sc->sc_opmode);
1089 }
1090 TULIP_WRITE(sc, CSR_RXPOLL, RXPOLL_RPD);
1091 break;
1092 }
1093 }
1094
1095 if (txstatus) {
1096 /* Sweep up transmit descriptors. */
1097 tlp_txintr(sc);
1098
1099 if (txstatus & STATUS_TJT)
1100 printf("%s: transmit jabber timeout\n",
1101 device_xname(sc->sc_dev));
1102
1103 if (txstatus & STATUS_UNF) {
1104 /*
1105 * Increase our transmit threshold if
1106 * another is available.
1107 */
1108 txthresh = sc->sc_txthresh + 1;
1109 if (sc->sc_txth[txthresh].txth_name != NULL) {
1110 /* Idle the transmit process. */
1111 tlp_idle(sc, OPMODE_ST);
1112
1113 sc->sc_txthresh = txthresh;
1114 sc->sc_opmode &= ~(OPMODE_TR|OPMODE_SF);
1115 sc->sc_opmode |=
1116 sc->sc_txth[txthresh].txth_opmode;
1117 printf("%s: transmit underrun; new "
1118 "threshold: %s\n",
1119 device_xname(sc->sc_dev),
1120 sc->sc_txth[txthresh].txth_name);
1121
1122 /*
1123 * Set the new threshold and restart
1124 * the transmit process.
1125 */
1126 TULIP_WRITE(sc, CSR_OPMODE,
1127 sc->sc_opmode);
1128 }
1129 /*
1130 * XXX Log every Nth underrun from
1131 * XXX now on?
1132 */
1133 }
1134 }
1135
1136 if (status & (STATUS_TPS|STATUS_RPS)) {
1137 if (status & STATUS_TPS)
1138 printf("%s: transmit process stopped\n",
1139 device_xname(sc->sc_dev));
1140 if (status & STATUS_RPS)
1141 printf("%s: receive process stopped\n",
1142 device_xname(sc->sc_dev));
1143 (void) tlp_init(ifp);
1144 break;
1145 }
1146
1147 if (status & STATUS_SE) {
1148 const char *str;
1149 switch (status & STATUS_EB) {
1150 case STATUS_EB_PARITY:
1151 str = "parity error";
1152 break;
1153
1154 case STATUS_EB_MABT:
1155 str = "master abort";
1156 break;
1157
1158 case STATUS_EB_TABT:
1159 str = "target abort";
1160 break;
1161
1162 default:
1163 str = "unknown error";
1164 break;
1165 }
1166 aprint_error_dev(sc->sc_dev, "fatal system error: %s\n",
1167 str);
1168 (void) tlp_init(ifp);
1169 break;
1170 }
1171
1172 /*
1173 * Not handled:
1174 *
1175 * Transmit buffer unavailable -- normal
1176 * condition, nothing to do, really.
1177 *
1178 * General purpose timer experied -- we don't
1179 * use the general purpose timer.
1180 *
1181 * Early receive interrupt -- not available on
1182 * all chips, we just use RI. We also only
1183 * use single-segment receive DMA, so this
1184 * is mostly useless.
1185 */
1186 }
1187
1188 /* Bring interrupts back up on the DM9102. */
1189 switch (sc->sc_chip) {
1190 case TULIP_CHIP_DM9102:
1191 case TULIP_CHIP_DM9102A:
1192 TULIP_WRITE(sc, CSR_INTEN, sc->sc_inten);
1193 break;
1194
1195 default:
1196 /* Nothing. */
1197 break;
1198 }
1199
1200 /* Try to get more packets going. */
1201 tlp_start(ifp);
1202
1203 #if NRND > 0
1204 if (handled)
1205 rnd_add_uint32(&sc->sc_rnd_source, status);
1206 #endif
1207 return (handled);
1208 }
1209
1210 /*
1211 * tlp_rxintr:
1212 *
1213 * Helper; handle receive interrupts.
1214 */
1215 static void
1216 tlp_rxintr(struct tulip_softc *sc)
1217 {
1218 struct ifnet *ifp = &sc->sc_ethercom.ec_if;
1219 struct ether_header *eh;
1220 struct tulip_rxsoft *rxs;
1221 struct mbuf *m;
1222 uint32_t rxstat, errors;
1223 int i, len;
1224
1225 for (i = sc->sc_rxptr;; i = TULIP_NEXTRX(i)) {
1226 rxs = &sc->sc_rxsoft[i];
1227
1228 TULIP_CDRXSYNC(sc, i,
1229 BUS_DMASYNC_POSTREAD|BUS_DMASYNC_POSTWRITE);
1230
1231 rxstat = le32toh(sc->sc_rxdescs[i].td_status);
1232
1233 if (rxstat & TDSTAT_OWN) {
1234 /*
1235 * We have processed all of the receive buffers.
1236 */
1237 break;
1238 }
1239
1240 /*
1241 * Make sure the packet fit in one buffer. This should
1242 * always be the case. But the Lite-On PNIC, rev 33
1243 * has an awful receive engine bug, which may require
1244 * a very icky work-around.
1245 */
1246 if ((rxstat & (TDSTAT_Rx_FS|TDSTAT_Rx_LS)) !=
1247 (TDSTAT_Rx_FS|TDSTAT_Rx_LS)) {
1248 printf("%s: incoming packet spilled, resetting\n",
1249 device_xname(sc->sc_dev));
1250 (void) tlp_init(ifp);
1251 return;
1252 }
1253
1254 /*
1255 * If any collisions were seen on the wire, count one.
1256 */
1257 if (rxstat & TDSTAT_Rx_CS)
1258 ifp->if_collisions++;
1259
1260 /*
1261 * If an error occurred, update stats, clear the status
1262 * word, and leave the packet buffer in place. It will
1263 * simply be reused the next time the ring comes around.
1264 */
1265 errors = TDSTAT_Rx_DE | TDSTAT_Rx_RF | TDSTAT_Rx_TL |
1266 TDSTAT_Rx_CS | TDSTAT_Rx_RE | TDSTAT_Rx_DB | TDSTAT_Rx_CE;
1267 /*
1268 * If 802.1Q VLAN MTU is enabled, ignore the Frame Too Long
1269 * error.
1270 */
1271 if ((sc->sc_ethercom.ec_capenable & ETHERCAP_VLAN_MTU) != 0)
1272 errors &= ~TDSTAT_Rx_TL;
1273 /*
1274 * If chip doesn't have MII, ignore the MII error bit.
1275 */
1276 if ((sc->sc_flags & TULIPF_HAS_MII) == 0)
1277 errors &= ~TDSTAT_Rx_RE;
1278
1279 if ((rxstat & TDSTAT_ES) != 0 &&
1280 (rxstat & errors) != 0) {
1281 rxstat &= errors;
1282 #define PRINTERR(bit, str) \
1283 if (rxstat & (bit)) \
1284 aprint_error_dev(sc->sc_dev, "receive error: %s\n", \
1285 str)
1286 ifp->if_ierrors++;
1287 PRINTERR(TDSTAT_Rx_DE, "descriptor error");
1288 PRINTERR(TDSTAT_Rx_RF, "runt frame");
1289 PRINTERR(TDSTAT_Rx_TL, "frame too long");
1290 PRINTERR(TDSTAT_Rx_RE, "MII error");
1291 PRINTERR(TDSTAT_Rx_DB, "dribbling bit");
1292 PRINTERR(TDSTAT_Rx_CE, "CRC error");
1293 #undef PRINTERR
1294 TULIP_INIT_RXDESC(sc, i);
1295 continue;
1296 }
1297
1298 bus_dmamap_sync(sc->sc_dmat, rxs->rxs_dmamap, 0,
1299 rxs->rxs_dmamap->dm_mapsize, BUS_DMASYNC_POSTREAD);
1300
1301 /*
1302 * No errors; receive the packet. Note the Tulip
1303 * includes the CRC with every packet.
1304 */
1305 len = TDSTAT_Rx_LENGTH(rxstat) - ETHER_CRC_LEN;
1306
1307 #ifdef __NO_STRICT_ALIGNMENT
1308 /*
1309 * Allocate a new mbuf cluster. If that fails, we are
1310 * out of memory, and must drop the packet and recycle
1311 * the buffer that's already attached to this descriptor.
1312 */
1313 m = rxs->rxs_mbuf;
1314 if (tlp_add_rxbuf(sc, i) != 0) {
1315 ifp->if_ierrors++;
1316 TULIP_INIT_RXDESC(sc, i);
1317 bus_dmamap_sync(sc->sc_dmat, rxs->rxs_dmamap, 0,
1318 rxs->rxs_dmamap->dm_mapsize, BUS_DMASYNC_PREREAD);
1319 continue;
1320 }
1321 #else
1322 /*
1323 * The Tulip's receive buffers must be 4-byte aligned.
1324 * But this means that the data after the Ethernet header
1325 * is misaligned. We must allocate a new buffer and
1326 * copy the data, shifted forward 2 bytes.
1327 */
1328 MGETHDR(m, M_DONTWAIT, MT_DATA);
1329 if (m == NULL) {
1330 dropit:
1331 ifp->if_ierrors++;
1332 TULIP_INIT_RXDESC(sc, i);
1333 bus_dmamap_sync(sc->sc_dmat, rxs->rxs_dmamap, 0,
1334 rxs->rxs_dmamap->dm_mapsize, BUS_DMASYNC_PREREAD);
1335 continue;
1336 }
1337 MCLAIM(m, &sc->sc_ethercom.ec_rx_mowner);
1338 if (len > (MHLEN - 2)) {
1339 MCLGET(m, M_DONTWAIT);
1340 if ((m->m_flags & M_EXT) == 0) {
1341 m_freem(m);
1342 goto dropit;
1343 }
1344 }
1345 m->m_data += 2;
1346
1347 /*
1348 * Note that we use clusters for incoming frames, so the
1349 * buffer is virtually contiguous.
1350 */
1351 memcpy(mtod(m, void *), mtod(rxs->rxs_mbuf, void *), len);
1352
1353 /* Allow the receive descriptor to continue using its mbuf. */
1354 TULIP_INIT_RXDESC(sc, i);
1355 bus_dmamap_sync(sc->sc_dmat, rxs->rxs_dmamap, 0,
1356 rxs->rxs_dmamap->dm_mapsize, BUS_DMASYNC_PREREAD);
1357 #endif /* __NO_STRICT_ALIGNMENT */
1358
1359 ifp->if_ipackets++;
1360 eh = mtod(m, struct ether_header *);
1361 m->m_pkthdr.rcvif = ifp;
1362 m->m_pkthdr.len = m->m_len = len;
1363
1364 /*
1365 * XXX Work-around for a weird problem with the emulated
1366 * 21041 on Connectix Virtual PC:
1367 *
1368 * When we receive a full-size TCP segment, we seem to get
1369 * a packet there the Rx status says 1522 bytes, yet we do
1370 * not get a frame-too-long error from the chip. The extra
1371 * bytes seem to always be zeros. Perhaps Virtual PC is
1372 * inserting 4 bytes of zeros after every packet. In any
1373 * case, let's try and detect this condition and truncate
1374 * the length so that it will pass up the stack.
1375 */
1376 if (__predict_false((sc->sc_flags & TULIPF_VPC) != 0)) {
1377 uint16_t etype = ntohs(eh->ether_type);
1378
1379 if (len > ETHER_MAX_FRAME(ifp, etype, 0))
1380 m->m_pkthdr.len = m->m_len = len =
1381 ETHER_MAX_FRAME(ifp, etype, 0);
1382 }
1383
1384 #if NBPFILTER > 0
1385 /*
1386 * Pass this up to any BPF listeners, but only
1387 * pass it up the stack if it's for us.
1388 */
1389 if (ifp->if_bpf)
1390 bpf_mtap(ifp->if_bpf, m);
1391 #endif /* NBPFILTER > 0 */
1392
1393 /*
1394 * We sometimes have to run the 21140 in Hash-Only
1395 * mode. If we're in that mode, and not in promiscuous
1396 * mode, and we have a unicast packet that isn't for
1397 * us, then drop it.
1398 */
1399 if (sc->sc_filtmode == TDCTL_Tx_FT_HASHONLY &&
1400 (ifp->if_flags & IFF_PROMISC) == 0 &&
1401 ETHER_IS_MULTICAST(eh->ether_dhost) == 0 &&
1402 memcmp(CLLADDR(ifp->if_sadl), eh->ether_dhost,
1403 ETHER_ADDR_LEN) != 0) {
1404 m_freem(m);
1405 continue;
1406 }
1407
1408 /* Pass it on. */
1409 (*ifp->if_input)(ifp, m);
1410 }
1411
1412 /* Update the receive pointer. */
1413 sc->sc_rxptr = i;
1414 }
1415
1416 /*
1417 * tlp_txintr:
1418 *
1419 * Helper; handle transmit interrupts.
1420 */
1421 static void
1422 tlp_txintr(struct tulip_softc *sc)
1423 {
1424 struct ifnet *ifp = &sc->sc_ethercom.ec_if;
1425 struct tulip_txsoft *txs;
1426 uint32_t txstat;
1427
1428 DPRINTF(sc, ("%s: tlp_txintr: sc_flags 0x%08x\n",
1429 device_xname(sc->sc_dev), sc->sc_flags));
1430
1431 ifp->if_flags &= ~IFF_OACTIVE;
1432
1433 /*
1434 * Go through our Tx list and free mbufs for those
1435 * frames that have been transmitted.
1436 */
1437 while ((txs = SIMPLEQ_FIRST(&sc->sc_txdirtyq)) != NULL) {
1438 TULIP_CDTXSYNC(sc, txs->txs_lastdesc,
1439 txs->txs_ndescs,
1440 BUS_DMASYNC_POSTREAD|BUS_DMASYNC_POSTWRITE);
1441
1442 #ifdef TLP_DEBUG
1443 if (ifp->if_flags & IFF_DEBUG) {
1444 int i;
1445 printf(" txsoft %p transmit chain:\n", txs);
1446 for (i = txs->txs_firstdesc;; i = TULIP_NEXTTX(i)) {
1447 printf(" descriptor %d:\n", i);
1448 printf(" td_status: 0x%08x\n",
1449 le32toh(sc->sc_txdescs[i].td_status));
1450 printf(" td_ctl: 0x%08x\n",
1451 le32toh(sc->sc_txdescs[i].td_ctl));
1452 printf(" td_bufaddr1: 0x%08x\n",
1453 le32toh(sc->sc_txdescs[i].td_bufaddr1));
1454 printf(" td_bufaddr2: 0x%08x\n",
1455 le32toh(sc->sc_txdescs[i].td_bufaddr2));
1456 if (i == txs->txs_lastdesc)
1457 break;
1458 }
1459 }
1460 #endif
1461
1462 txstat = le32toh(sc->sc_txdescs[txs->txs_lastdesc].td_status);
1463 if (txstat & TDSTAT_OWN)
1464 break;
1465
1466 SIMPLEQ_REMOVE_HEAD(&sc->sc_txdirtyq, txs_q);
1467
1468 sc->sc_txfree += txs->txs_ndescs;
1469
1470 if (txs->txs_mbuf == NULL) {
1471 /*
1472 * If we didn't have an mbuf, it was the setup
1473 * packet.
1474 */
1475 #ifdef DIAGNOSTIC
1476 if ((sc->sc_flags & TULIPF_DOING_SETUP) == 0)
1477 panic("tlp_txintr: null mbuf, not doing setup");
1478 #endif
1479 TULIP_CDSPSYNC(sc, BUS_DMASYNC_POSTWRITE);
1480 sc->sc_flags &= ~TULIPF_DOING_SETUP;
1481 SIMPLEQ_INSERT_TAIL(&sc->sc_txfreeq, txs, txs_q);
1482 continue;
1483 }
1484
1485 bus_dmamap_sync(sc->sc_dmat, txs->txs_dmamap,
1486 0, txs->txs_dmamap->dm_mapsize,
1487 BUS_DMASYNC_POSTWRITE);
1488 bus_dmamap_unload(sc->sc_dmat, txs->txs_dmamap);
1489 m_freem(txs->txs_mbuf);
1490 txs->txs_mbuf = NULL;
1491
1492 SIMPLEQ_INSERT_TAIL(&sc->sc_txfreeq, txs, txs_q);
1493
1494 /*
1495 * Check for errors and collisions.
1496 */
1497 #ifdef TLP_STATS
1498 if (txstat & TDSTAT_Tx_UF)
1499 sc->sc_stats.ts_tx_uf++;
1500 if (txstat & TDSTAT_Tx_TO)
1501 sc->sc_stats.ts_tx_to++;
1502 if (txstat & TDSTAT_Tx_EC)
1503 sc->sc_stats.ts_tx_ec++;
1504 if (txstat & TDSTAT_Tx_LC)
1505 sc->sc_stats.ts_tx_lc++;
1506 #endif
1507
1508 if (txstat & (TDSTAT_Tx_UF|TDSTAT_Tx_TO))
1509 ifp->if_oerrors++;
1510
1511 if (txstat & TDSTAT_Tx_EC)
1512 ifp->if_collisions += 16;
1513 else
1514 ifp->if_collisions += TDSTAT_Tx_COLLISIONS(txstat);
1515 if (txstat & TDSTAT_Tx_LC)
1516 ifp->if_collisions++;
1517
1518 ifp->if_opackets++;
1519 }
1520
1521 /*
1522 * If there are no more pending transmissions, cancel the watchdog
1523 * timer.
1524 */
1525 if (txs == NULL && (sc->sc_flags & TULIPF_DOING_SETUP) == 0)
1526 ifp->if_timer = 0;
1527
1528 /*
1529 * If we have a receive filter setup pending, do it now.
1530 */
1531 if (sc->sc_flags & TULIPF_WANT_SETUP)
1532 (*sc->sc_filter_setup)(sc);
1533 }
1534
1535 #ifdef TLP_STATS
1536 void
1537 tlp_print_stats(struct tulip_softc *sc)
1538 {
1539
1540 printf("%s: tx_uf %lu, tx_to %lu, tx_ec %lu, tx_lc %lu\n",
1541 device_xname(sc->sc_dev),
1542 sc->sc_stats.ts_tx_uf, sc->sc_stats.ts_tx_to,
1543 sc->sc_stats.ts_tx_ec, sc->sc_stats.ts_tx_lc);
1544 }
1545 #endif
1546
1547 /*
1548 * tlp_reset:
1549 *
1550 * Perform a soft reset on the Tulip.
1551 */
1552 void
1553 tlp_reset(struct tulip_softc *sc)
1554 {
1555 int i;
1556
1557 TULIP_WRITE(sc, CSR_BUSMODE, BUSMODE_SWR);
1558
1559 /*
1560 * Xircom, ASIX and Conexant clones don't bring themselves
1561 * out of reset automatically.
1562 * Instead, we have to wait at least 50 PCI cycles, and then
1563 * clear SWR.
1564 */
1565 switch (sc->sc_chip) {
1566 case TULIP_CHIP_X3201_3:
1567 case TULIP_CHIP_AX88140:
1568 case TULIP_CHIP_AX88141:
1569 case TULIP_CHIP_RS7112:
1570 delay(10);
1571 TULIP_WRITE(sc, CSR_BUSMODE, 0);
1572 break;
1573 default:
1574 break;
1575 }
1576
1577 for (i = 0; i < 1000; i++) {
1578 /*
1579 * Wait at least 50 PCI cycles for the reset to
1580 * complete before peeking at the Tulip again.
1581 * 10 uSec is a bit longer than 50 PCI cycles
1582 * (at 33MHz), but it doesn't hurt have the extra
1583 * wait.
1584 */
1585 delay(10);
1586 if (TULIP_ISSET(sc, CSR_BUSMODE, BUSMODE_SWR) == 0)
1587 break;
1588 }
1589
1590 if (TULIP_ISSET(sc, CSR_BUSMODE, BUSMODE_SWR))
1591 aprint_error_dev(sc->sc_dev, "reset failed to complete\n");
1592
1593 delay(1000);
1594
1595 /*
1596 * If the board has any GPIO reset sequences to issue, do them now.
1597 */
1598 if (sc->sc_reset != NULL)
1599 (*sc->sc_reset)(sc);
1600 }
1601
1602 /*
1603 * tlp_init: [ ifnet interface function ]
1604 *
1605 * Initialize the interface. Must be called at splnet().
1606 */
1607 static int
1608 tlp_init(struct ifnet *ifp)
1609 {
1610 struct tulip_softc *sc = ifp->if_softc;
1611 struct tulip_txsoft *txs;
1612 struct tulip_rxsoft *rxs;
1613 int i, error = 0;
1614
1615 if ((error = tlp_enable(sc)) != 0)
1616 goto out;
1617
1618 /*
1619 * Cancel any pending I/O.
1620 */
1621 tlp_stop(ifp, 0);
1622
1623 /*
1624 * Initialize `opmode' to 0, and call the pre-init routine, if
1625 * any. This is required because the 2114x and some of the
1626 * clones require that the media-related bits in `opmode' be
1627 * set before performing a soft-reset in order to get internal
1628 * chip pathways are correct. Yay!
1629 */
1630 sc->sc_opmode = 0;
1631 if (sc->sc_preinit != NULL)
1632 (*sc->sc_preinit)(sc);
1633
1634 /*
1635 * Reset the Tulip to a known state.
1636 */
1637 tlp_reset(sc);
1638
1639 /*
1640 * Initialize the BUSMODE register.
1641 */
1642 sc->sc_busmode = BUSMODE_BAR;
1643 switch (sc->sc_chip) {
1644 case TULIP_CHIP_21140:
1645 case TULIP_CHIP_21140A:
1646 case TULIP_CHIP_21142:
1647 case TULIP_CHIP_21143:
1648 case TULIP_CHIP_82C115:
1649 case TULIP_CHIP_MX98725:
1650 /*
1651 * If we're allowed to do so, use Memory Read Line
1652 * and Memory Read Multiple.
1653 *
1654 * XXX Should we use Memory Write and Invalidate?
1655 */
1656 if (sc->sc_flags & TULIPF_MRL)
1657 sc->sc_busmode |= BUSMODE_RLE;
1658 if (sc->sc_flags & TULIPF_MRM)
1659 sc->sc_busmode |= BUSMODE_RME;
1660 #if 0
1661 if (sc->sc_flags & TULIPF_MWI)
1662 sc->sc_busmode |= BUSMODE_WLE;
1663 #endif
1664 break;
1665
1666 case TULIP_CHIP_82C168:
1667 case TULIP_CHIP_82C169:
1668 sc->sc_busmode |= BUSMODE_PNIC_MBO;
1669 if (sc->sc_maxburst == 0)
1670 sc->sc_maxburst = 16;
1671 break;
1672
1673 case TULIP_CHIP_AX88140:
1674 case TULIP_CHIP_AX88141:
1675 if (sc->sc_maxburst == 0)
1676 sc->sc_maxburst = 16;
1677 break;
1678
1679 default:
1680 /* Nothing. */
1681 break;
1682 }
1683 switch (sc->sc_cacheline) {
1684 default:
1685 /*
1686 * Note: We must *always* set these bits; a cache
1687 * alignment of 0 is RESERVED.
1688 */
1689 case 8:
1690 sc->sc_busmode |= BUSMODE_CAL_8LW;
1691 break;
1692 case 16:
1693 sc->sc_busmode |= BUSMODE_CAL_16LW;
1694 break;
1695 case 32:
1696 sc->sc_busmode |= BUSMODE_CAL_32LW;
1697 break;
1698 }
1699 switch (sc->sc_maxburst) {
1700 case 1:
1701 sc->sc_busmode |= BUSMODE_PBL_1LW;
1702 break;
1703 case 2:
1704 sc->sc_busmode |= BUSMODE_PBL_2LW;
1705 break;
1706 case 4:
1707 sc->sc_busmode |= BUSMODE_PBL_4LW;
1708 break;
1709 case 8:
1710 sc->sc_busmode |= BUSMODE_PBL_8LW;
1711 break;
1712 case 16:
1713 sc->sc_busmode |= BUSMODE_PBL_16LW;
1714 break;
1715 case 32:
1716 sc->sc_busmode |= BUSMODE_PBL_32LW;
1717 break;
1718 default:
1719 sc->sc_busmode |= BUSMODE_PBL_DEFAULT;
1720 break;
1721 }
1722 #if BYTE_ORDER == BIG_ENDIAN
1723 /*
1724 * Can't use BUSMODE_BLE or BUSMODE_DBO; not all chips
1725 * support them, and even on ones that do, it doesn't
1726 * always work. So we always access descriptors with
1727 * little endian via htole32/le32toh.
1728 */
1729 #endif
1730 /*
1731 * Big-endian bus requires BUSMODE_BLE anyway.
1732 * Also, BUSMODE_DBO is needed because we assume
1733 * descriptors are little endian.
1734 */
1735 if (sc->sc_flags & TULIPF_BLE)
1736 sc->sc_busmode |= BUSMODE_BLE;
1737 if (sc->sc_flags & TULIPF_DBO)
1738 sc->sc_busmode |= BUSMODE_DBO;
1739
1740 /*
1741 * Some chips have a broken bus interface.
1742 */
1743 switch (sc->sc_chip) {
1744 case TULIP_CHIP_DM9102:
1745 case TULIP_CHIP_DM9102A:
1746 sc->sc_busmode = 0;
1747 break;
1748
1749 default:
1750 /* Nothing. */
1751 break;
1752 }
1753
1754 TULIP_WRITE(sc, CSR_BUSMODE, sc->sc_busmode);
1755
1756 /*
1757 * Initialize the OPMODE register. We don't write it until
1758 * we're ready to begin the transmit and receive processes.
1759 *
1760 * Media-related OPMODE bits are set in the media callbacks
1761 * for each specific chip/board.
1762 */
1763 sc->sc_opmode |= OPMODE_SR | OPMODE_ST |
1764 sc->sc_txth[sc->sc_txthresh].txth_opmode;
1765
1766 /*
1767 * Magical mystery initialization on the Macronix chips.
1768 * The MX98713 uses its own magic value, the rest share
1769 * a common one.
1770 */
1771 switch (sc->sc_chip) {
1772 case TULIP_CHIP_MX98713:
1773 TULIP_WRITE(sc, CSR_PMAC_TOR, PMAC_TOR_98713);
1774 break;
1775
1776 case TULIP_CHIP_MX98713A:
1777 case TULIP_CHIP_MX98715:
1778 case TULIP_CHIP_MX98715A:
1779 case TULIP_CHIP_MX98715AEC_X:
1780 case TULIP_CHIP_MX98725:
1781 TULIP_WRITE(sc, CSR_PMAC_TOR, PMAC_TOR_98715);
1782 break;
1783
1784 default:
1785 /* Nothing. */
1786 break;
1787 }
1788
1789 /*
1790 * Initialize the transmit descriptor ring.
1791 */
1792 memset(sc->sc_txdescs, 0, sizeof(sc->sc_txdescs));
1793 for (i = 0; i < TULIP_NTXDESC; i++) {
1794 sc->sc_txdescs[i].td_ctl = htole32(sc->sc_tdctl_ch);
1795 sc->sc_txdescs[i].td_bufaddr2 =
1796 htole32(TULIP_CDTXADDR(sc, TULIP_NEXTTX(i)));
1797 }
1798 sc->sc_txdescs[TULIP_NTXDESC - 1].td_ctl |= htole32(sc->sc_tdctl_er);
1799 TULIP_CDTXSYNC(sc, 0, TULIP_NTXDESC,
1800 BUS_DMASYNC_PREREAD|BUS_DMASYNC_PREWRITE);
1801 sc->sc_txfree = TULIP_NTXDESC;
1802 sc->sc_txnext = 0;
1803
1804 /*
1805 * Initialize the transmit job descriptors.
1806 */
1807 SIMPLEQ_INIT(&sc->sc_txfreeq);
1808 SIMPLEQ_INIT(&sc->sc_txdirtyq);
1809 for (i = 0; i < TULIP_TXQUEUELEN; i++) {
1810 txs = &sc->sc_txsoft[i];
1811 txs->txs_mbuf = NULL;
1812 SIMPLEQ_INSERT_TAIL(&sc->sc_txfreeq, txs, txs_q);
1813 }
1814
1815 /*
1816 * Initialize the receive descriptor and receive job
1817 * descriptor rings.
1818 */
1819 for (i = 0; i < TULIP_NRXDESC; i++) {
1820 rxs = &sc->sc_rxsoft[i];
1821 if (rxs->rxs_mbuf == NULL) {
1822 if ((error = tlp_add_rxbuf(sc, i)) != 0) {
1823 aprint_error_dev(sc->sc_dev, "unable to allocate or map rx "
1824 "buffer %d, error = %d\n",
1825 i, error);
1826 /*
1827 * XXX Should attempt to run with fewer receive
1828 * XXX buffers instead of just failing.
1829 */
1830 tlp_rxdrain(sc);
1831 goto out;
1832 }
1833 } else
1834 TULIP_INIT_RXDESC(sc, i);
1835 }
1836 sc->sc_rxptr = 0;
1837
1838 /*
1839 * Initialize the interrupt mask and enable interrupts.
1840 */
1841 /* normal interrupts */
1842 sc->sc_inten = STATUS_TI | STATUS_TU | STATUS_RI | STATUS_NIS;
1843
1844 /* abnormal interrupts */
1845 sc->sc_inten |= STATUS_TPS | STATUS_TJT | STATUS_UNF |
1846 STATUS_RU | STATUS_RPS | STATUS_RWT | STATUS_SE | STATUS_AIS;
1847
1848 sc->sc_rxint_mask = STATUS_RI|STATUS_RU|STATUS_RWT;
1849 sc->sc_txint_mask = STATUS_TI|STATUS_UNF|STATUS_TJT;
1850
1851 switch (sc->sc_chip) {
1852 case TULIP_CHIP_WB89C840F:
1853 /*
1854 * Clear bits that we don't want that happen to
1855 * overlap or don't exist.
1856 */
1857 sc->sc_inten &= ~(STATUS_WINB_REI|STATUS_RWT);
1858 break;
1859
1860 default:
1861 /* Nothing. */
1862 break;
1863 }
1864
1865 sc->sc_rxint_mask &= sc->sc_inten;
1866 sc->sc_txint_mask &= sc->sc_inten;
1867
1868 TULIP_WRITE(sc, CSR_INTEN, sc->sc_inten);
1869 TULIP_WRITE(sc, CSR_STATUS, 0xffffffff);
1870
1871 /*
1872 * Give the transmit and receive rings to the Tulip.
1873 */
1874 TULIP_WRITE(sc, CSR_TXLIST, TULIP_CDTXADDR(sc, sc->sc_txnext));
1875 TULIP_WRITE(sc, CSR_RXLIST, TULIP_CDRXADDR(sc, sc->sc_rxptr));
1876
1877 /*
1878 * On chips that do this differently, set the station address.
1879 */
1880 switch (sc->sc_chip) {
1881 case TULIP_CHIP_WB89C840F:
1882 {
1883 /* XXX Do this with stream writes? */
1884 bus_addr_t cpa = TULIP_CSR_OFFSET(sc, CSR_WINB_CPA0);
1885
1886 for (i = 0; i < ETHER_ADDR_LEN; i++) {
1887 bus_space_write_1(sc->sc_st, sc->sc_sh,
1888 cpa + i, CLLADDR(ifp->if_sadl)[i]);
1889 }
1890 break;
1891 }
1892
1893 case TULIP_CHIP_AL981:
1894 case TULIP_CHIP_AN983:
1895 case TULIP_CHIP_AN985:
1896 {
1897 uint32_t reg;
1898 const uint8_t *enaddr = CLLADDR(ifp->if_sadl);
1899
1900 reg = enaddr[0] |
1901 (enaddr[1] << 8) |
1902 (enaddr[2] << 16) |
1903 (enaddr[3] << 24);
1904 bus_space_write_4(sc->sc_st, sc->sc_sh, CSR_ADM_PAR0, reg);
1905
1906 reg = enaddr[4] |
1907 (enaddr[5] << 8);
1908 bus_space_write_4(sc->sc_st, sc->sc_sh, CSR_ADM_PAR1, reg);
1909 break;
1910 }
1911
1912 case TULIP_CHIP_AX88140:
1913 case TULIP_CHIP_AX88141:
1914 {
1915 uint32_t reg;
1916 const uint8_t *enaddr = CLLADDR(ifp->if_sadl);
1917
1918 reg = enaddr[0] |
1919 (enaddr[1] << 8) |
1920 (enaddr[2] << 16) |
1921 (enaddr[3] << 24);
1922 TULIP_WRITE(sc, CSR_AX_FILTIDX, AX_FILTIDX_PAR0);
1923 TULIP_WRITE(sc, CSR_AX_FILTDATA, reg);
1924
1925 reg = enaddr[4] | (enaddr[5] << 8);
1926 TULIP_WRITE(sc, CSR_AX_FILTIDX, AX_FILTIDX_PAR1);
1927 TULIP_WRITE(sc, CSR_AX_FILTDATA, reg);
1928 break;
1929 }
1930
1931 default:
1932 /* Nothing. */
1933 break;
1934 }
1935
1936 /*
1937 * Set the receive filter. This will start the transmit and
1938 * receive processes.
1939 */
1940 (*sc->sc_filter_setup)(sc);
1941
1942 /*
1943 * Set the current media.
1944 */
1945 (void) (*sc->sc_mediasw->tmsw_set)(sc);
1946
1947 /*
1948 * Start the receive process.
1949 */
1950 TULIP_WRITE(sc, CSR_RXPOLL, RXPOLL_RPD);
1951
1952 if (sc->sc_tick != NULL) {
1953 /* Start the one second clock. */
1954 callout_reset(&sc->sc_tick_callout, hz >> 3, sc->sc_tick, sc);
1955 }
1956
1957 /*
1958 * Note that the interface is now running.
1959 */
1960 ifp->if_flags |= IFF_RUNNING;
1961 ifp->if_flags &= ~IFF_OACTIVE;
1962 sc->sc_if_flags = ifp->if_flags;
1963
1964 out:
1965 if (error) {
1966 ifp->if_flags &= ~(IFF_RUNNING | IFF_OACTIVE);
1967 ifp->if_timer = 0;
1968 printf("%s: interface not running\n", device_xname(sc->sc_dev));
1969 }
1970 return (error);
1971 }
1972
1973 /*
1974 * tlp_enable:
1975 *
1976 * Enable the Tulip chip.
1977 */
1978 static int
1979 tlp_enable(struct tulip_softc *sc)
1980 {
1981
1982 if (TULIP_IS_ENABLED(sc) == 0 && sc->sc_enable != NULL) {
1983 if ((*sc->sc_enable)(sc) != 0) {
1984 aprint_error_dev(sc->sc_dev, "device enable failed\n");
1985 return (EIO);
1986 }
1987 sc->sc_flags |= TULIPF_ENABLED;
1988 }
1989 return (0);
1990 }
1991
1992 /*
1993 * tlp_disable:
1994 *
1995 * Disable the Tulip chip.
1996 */
1997 static void
1998 tlp_disable(struct tulip_softc *sc)
1999 {
2000
2001 if (TULIP_IS_ENABLED(sc) && sc->sc_disable != NULL) {
2002 (*sc->sc_disable)(sc);
2003 sc->sc_flags &= ~TULIPF_ENABLED;
2004 }
2005 }
2006
2007 /*
2008 * tlp_rxdrain:
2009 *
2010 * Drain the receive queue.
2011 */
2012 static void
2013 tlp_rxdrain(struct tulip_softc *sc)
2014 {
2015 struct tulip_rxsoft *rxs;
2016 int i;
2017
2018 for (i = 0; i < TULIP_NRXDESC; i++) {
2019 rxs = &sc->sc_rxsoft[i];
2020 if (rxs->rxs_mbuf != NULL) {
2021 bus_dmamap_unload(sc->sc_dmat, rxs->rxs_dmamap);
2022 m_freem(rxs->rxs_mbuf);
2023 rxs->rxs_mbuf = NULL;
2024 }
2025 }
2026 }
2027
2028 /*
2029 * tlp_stop: [ ifnet interface function ]
2030 *
2031 * Stop transmission on the interface.
2032 */
2033 static void
2034 tlp_stop(struct ifnet *ifp, int disable)
2035 {
2036 struct tulip_softc *sc = ifp->if_softc;
2037 struct tulip_txsoft *txs;
2038
2039 if (sc->sc_tick != NULL) {
2040 /* Stop the one second clock. */
2041 callout_stop(&sc->sc_tick_callout);
2042 }
2043
2044 if (sc->sc_flags & TULIPF_HAS_MII) {
2045 /* Down the MII. */
2046 mii_down(&sc->sc_mii);
2047 }
2048
2049 /* Disable interrupts. */
2050 TULIP_WRITE(sc, CSR_INTEN, 0);
2051
2052 /* Stop the transmit and receive processes. */
2053 sc->sc_opmode = 0;
2054 TULIP_WRITE(sc, CSR_OPMODE, 0);
2055 TULIP_WRITE(sc, CSR_RXLIST, 0);
2056 TULIP_WRITE(sc, CSR_TXLIST, 0);
2057
2058 /*
2059 * Release any queued transmit buffers.
2060 */
2061 while ((txs = SIMPLEQ_FIRST(&sc->sc_txdirtyq)) != NULL) {
2062 SIMPLEQ_REMOVE_HEAD(&sc->sc_txdirtyq, txs_q);
2063 if (txs->txs_mbuf != NULL) {
2064 bus_dmamap_unload(sc->sc_dmat, txs->txs_dmamap);
2065 m_freem(txs->txs_mbuf);
2066 txs->txs_mbuf = NULL;
2067 }
2068 SIMPLEQ_INSERT_TAIL(&sc->sc_txfreeq, txs, txs_q);
2069 }
2070
2071 sc->sc_flags &= ~(TULIPF_WANT_SETUP|TULIPF_DOING_SETUP);
2072
2073 /*
2074 * Mark the interface down and cancel the watchdog timer.
2075 */
2076 ifp->if_flags &= ~(IFF_RUNNING | IFF_OACTIVE);
2077 sc->sc_if_flags = ifp->if_flags;
2078 ifp->if_timer = 0;
2079
2080 /*
2081 * Reset the chip (needed on some flavors to actually disable it).
2082 */
2083 tlp_reset(sc);
2084
2085 if (disable) {
2086 tlp_rxdrain(sc);
2087 tlp_disable(sc);
2088 }
2089 }
2090
2091 #define SROM_EMIT(sc, x) \
2092 do { \
2093 TULIP_WRITE((sc), CSR_MIIROM, (x)); \
2094 delay(2); \
2095 } while (0)
2096
2097 /*
2098 * tlp_srom_idle:
2099 *
2100 * Put the SROM in idle state.
2101 */
2102 static void
2103 tlp_srom_idle(struct tulip_softc *sc)
2104 {
2105 uint32_t miirom;
2106 int i;
2107
2108 miirom = MIIROM_SR;
2109 SROM_EMIT(sc, miirom);
2110
2111 miirom |= MIIROM_RD;
2112 SROM_EMIT(sc, miirom);
2113
2114 miirom |= MIIROM_SROMCS;
2115 SROM_EMIT(sc, miirom);
2116
2117 SROM_EMIT(sc, miirom|MIIROM_SROMSK);
2118
2119 /* Strobe the clock 32 times. */
2120 for (i = 0; i < 32; i++) {
2121 SROM_EMIT(sc, miirom);
2122 SROM_EMIT(sc, miirom|MIIROM_SROMSK);
2123 }
2124
2125 SROM_EMIT(sc, miirom);
2126
2127 miirom &= ~MIIROM_SROMCS;
2128 SROM_EMIT(sc, miirom);
2129
2130 SROM_EMIT(sc, 0);
2131 }
2132
2133 /*
2134 * tlp_srom_size:
2135 *
2136 * Determine the number of address bits in the SROM.
2137 */
2138 static int
2139 tlp_srom_size(struct tulip_softc *sc)
2140 {
2141 uint32_t miirom;
2142 int x;
2143
2144 /* Select the SROM. */
2145 miirom = MIIROM_SR;
2146 SROM_EMIT(sc, miirom);
2147
2148 miirom |= MIIROM_RD;
2149 SROM_EMIT(sc, miirom);
2150
2151 /* Send CHIP SELECT for one clock tick. */
2152 miirom |= MIIROM_SROMCS;
2153 SROM_EMIT(sc, miirom);
2154
2155 /* Shift in the READ opcode. */
2156 for (x = 3; x > 0; x--) {
2157 if (TULIP_SROM_OPC_READ & (1 << (x - 1)))
2158 miirom |= MIIROM_SROMDI;
2159 else
2160 miirom &= ~MIIROM_SROMDI;
2161 SROM_EMIT(sc, miirom);
2162 SROM_EMIT(sc, miirom|MIIROM_SROMSK);
2163 SROM_EMIT(sc, miirom);
2164 }
2165
2166 /* Shift in address and look for dummy 0 bit. */
2167 for (x = 1; x <= 12; x++) {
2168 miirom &= ~MIIROM_SROMDI;
2169 SROM_EMIT(sc, miirom);
2170 SROM_EMIT(sc, miirom|MIIROM_SROMSK);
2171 if (!TULIP_ISSET(sc, CSR_MIIROM, MIIROM_SROMDO))
2172 break;
2173 SROM_EMIT(sc, miirom);
2174 }
2175
2176 /* Clear CHIP SELECT. */
2177 miirom &= ~MIIROM_SROMCS;
2178 SROM_EMIT(sc, miirom);
2179
2180 /* Deselect the SROM. */
2181 SROM_EMIT(sc, 0);
2182
2183 if (x < 4 || x > 12) {
2184 aprint_debug_dev(sc->sc_dev, "broken MicroWire interface detected; "
2185 "setting SROM size to 1Kb\n");
2186 return (6);
2187 } else {
2188 if (tlp_srom_debug)
2189 printf("%s: SROM size is 2^%d*16 bits (%d bytes)\n",
2190 device_xname(sc->sc_dev), x, (1 << (x + 4)) >> 3);
2191 return (x);
2192 }
2193 }
2194
2195 /*
2196 * tlp_read_srom:
2197 *
2198 * Read the Tulip SROM.
2199 */
2200 int
2201 tlp_read_srom(struct tulip_softc *sc)
2202 {
2203 int size;
2204 uint32_t miirom;
2205 uint16_t datain;
2206 int i, x;
2207
2208 tlp_srom_idle(sc);
2209
2210 sc->sc_srom_addrbits = tlp_srom_size(sc);
2211 if (sc->sc_srom_addrbits == 0)
2212 return (0);
2213 size = TULIP_ROM_SIZE(sc->sc_srom_addrbits);
2214 sc->sc_srom = malloc(size, M_DEVBUF, M_NOWAIT);
2215
2216 /* Select the SROM. */
2217 miirom = MIIROM_SR;
2218 SROM_EMIT(sc, miirom);
2219
2220 miirom |= MIIROM_RD;
2221 SROM_EMIT(sc, miirom);
2222
2223 for (i = 0; i < size; i += 2) {
2224 /* Send CHIP SELECT for one clock tick. */
2225 miirom |= MIIROM_SROMCS;
2226 SROM_EMIT(sc, miirom);
2227
2228 /* Shift in the READ opcode. */
2229 for (x = 3; x > 0; x--) {
2230 if (TULIP_SROM_OPC_READ & (1 << (x - 1)))
2231 miirom |= MIIROM_SROMDI;
2232 else
2233 miirom &= ~MIIROM_SROMDI;
2234 SROM_EMIT(sc, miirom);
2235 SROM_EMIT(sc, miirom|MIIROM_SROMSK);
2236 SROM_EMIT(sc, miirom);
2237 }
2238
2239 /* Shift in address. */
2240 for (x = sc->sc_srom_addrbits; x > 0; x--) {
2241 if (i & (1 << x))
2242 miirom |= MIIROM_SROMDI;
2243 else
2244 miirom &= ~MIIROM_SROMDI;
2245 SROM_EMIT(sc, miirom);
2246 SROM_EMIT(sc, miirom|MIIROM_SROMSK);
2247 SROM_EMIT(sc, miirom);
2248 }
2249
2250 /* Shift out data. */
2251 miirom &= ~MIIROM_SROMDI;
2252 datain = 0;
2253 for (x = 16; x > 0; x--) {
2254 SROM_EMIT(sc, miirom|MIIROM_SROMSK);
2255 if (TULIP_ISSET(sc, CSR_MIIROM, MIIROM_SROMDO))
2256 datain |= (1 << (x - 1));
2257 SROM_EMIT(sc, miirom);
2258 }
2259 sc->sc_srom[i] = datain & 0xff;
2260 sc->sc_srom[i + 1] = datain >> 8;
2261
2262 /* Clear CHIP SELECT. */
2263 miirom &= ~MIIROM_SROMCS;
2264 SROM_EMIT(sc, miirom);
2265 }
2266
2267 /* Deselect the SROM. */
2268 SROM_EMIT(sc, 0);
2269
2270 /* ...and idle it. */
2271 tlp_srom_idle(sc);
2272
2273 if (tlp_srom_debug) {
2274 printf("SROM CONTENTS:");
2275 for (i = 0; i < size; i++) {
2276 if ((i % 8) == 0)
2277 printf("\n\t");
2278 printf("0x%02x ", sc->sc_srom[i]);
2279 }
2280 printf("\n");
2281 }
2282
2283 return (1);
2284 }
2285
2286 #undef SROM_EMIT
2287
2288 /*
2289 * tlp_add_rxbuf:
2290 *
2291 * Add a receive buffer to the indicated descriptor.
2292 */
2293 static int
2294 tlp_add_rxbuf(struct tulip_softc *sc, int idx)
2295 {
2296 struct tulip_rxsoft *rxs = &sc->sc_rxsoft[idx];
2297 struct mbuf *m;
2298 int error;
2299
2300 MGETHDR(m, M_DONTWAIT, MT_DATA);
2301 if (m == NULL)
2302 return (ENOBUFS);
2303
2304 MCLAIM(m, &sc->sc_ethercom.ec_rx_mowner);
2305 MCLGET(m, M_DONTWAIT);
2306 if ((m->m_flags & M_EXT) == 0) {
2307 m_freem(m);
2308 return (ENOBUFS);
2309 }
2310
2311 if (rxs->rxs_mbuf != NULL)
2312 bus_dmamap_unload(sc->sc_dmat, rxs->rxs_dmamap);
2313
2314 rxs->rxs_mbuf = m;
2315
2316 error = bus_dmamap_load(sc->sc_dmat, rxs->rxs_dmamap,
2317 m->m_ext.ext_buf, m->m_ext.ext_size, NULL,
2318 BUS_DMA_READ|BUS_DMA_NOWAIT);
2319 if (error) {
2320 aprint_error_dev(sc->sc_dev, "can't load rx DMA map %d, error = %d\n",
2321 idx, error);
2322 panic("tlp_add_rxbuf"); /* XXX */
2323 }
2324
2325 bus_dmamap_sync(sc->sc_dmat, rxs->rxs_dmamap, 0,
2326 rxs->rxs_dmamap->dm_mapsize, BUS_DMASYNC_PREREAD);
2327
2328 TULIP_INIT_RXDESC(sc, idx);
2329
2330 return (0);
2331 }
2332
2333 /*
2334 * tlp_srom_crcok:
2335 *
2336 * Check the CRC of the Tulip SROM.
2337 */
2338 int
2339 tlp_srom_crcok(const uint8_t *romdata)
2340 {
2341 uint32_t crc;
2342
2343 crc = ether_crc32_le(romdata, TULIP_ROM_CRC32_CHECKSUM);
2344 crc = (crc & 0xffff) ^ 0xffff;
2345 if (crc == TULIP_ROM_GETW(romdata, TULIP_ROM_CRC32_CHECKSUM))
2346 return (1);
2347
2348 /*
2349 * Try an alternate checksum.
2350 */
2351 crc = ether_crc32_le(romdata, TULIP_ROM_CRC32_CHECKSUM1);
2352 crc = (crc & 0xffff) ^ 0xffff;
2353 if (crc == TULIP_ROM_GETW(romdata, TULIP_ROM_CRC32_CHECKSUM1))
2354 return (1);
2355
2356 return (0);
2357 }
2358
2359 /*
2360 * tlp_isv_srom:
2361 *
2362 * Check to see if the SROM is in the new standardized format.
2363 */
2364 int
2365 tlp_isv_srom(const uint8_t *romdata)
2366 {
2367 int i;
2368 uint16_t cksum;
2369
2370 if (tlp_srom_crcok(romdata)) {
2371 /*
2372 * SROM CRC checks out; must be in the new format.
2373 */
2374 return (1);
2375 }
2376
2377 cksum = TULIP_ROM_GETW(romdata, TULIP_ROM_CRC32_CHECKSUM);
2378 if (cksum == 0xffff || cksum == 0) {
2379 /*
2380 * No checksum present. Check the SROM ID; 18 bytes of 0
2381 * followed by 1 (version) followed by the number of
2382 * adapters which use this SROM (should be non-zero).
2383 */
2384 for (i = 0; i < TULIP_ROM_SROM_FORMAT_VERION; i++) {
2385 if (romdata[i] != 0)
2386 return (0);
2387 }
2388 if (romdata[TULIP_ROM_SROM_FORMAT_VERION] != 1)
2389 return (0);
2390 if (romdata[TULIP_ROM_CHIP_COUNT] == 0)
2391 return (0);
2392 return (1);
2393 }
2394
2395 return (0);
2396 }
2397
2398 /*
2399 * tlp_isv_srom_enaddr:
2400 *
2401 * Get the Ethernet address from an ISV SROM.
2402 */
2403 int
2404 tlp_isv_srom_enaddr(struct tulip_softc *sc, uint8_t *enaddr)
2405 {
2406 int i, devcnt;
2407
2408 if (tlp_isv_srom(sc->sc_srom) == 0)
2409 return (0);
2410
2411 devcnt = sc->sc_srom[TULIP_ROM_CHIP_COUNT];
2412 for (i = 0; i < devcnt; i++) {
2413 if (sc->sc_srom[TULIP_ROM_CHIP_COUNT] == 1)
2414 break;
2415 if (sc->sc_srom[TULIP_ROM_CHIPn_DEVICE_NUMBER(i)] ==
2416 sc->sc_devno)
2417 break;
2418 }
2419
2420 if (i == devcnt)
2421 return (0);
2422
2423 memcpy(enaddr, &sc->sc_srom[TULIP_ROM_IEEE_NETWORK_ADDRESS],
2424 ETHER_ADDR_LEN);
2425 enaddr[5] += i;
2426
2427 return (1);
2428 }
2429
2430 /*
2431 * tlp_parse_old_srom:
2432 *
2433 * Parse old-format SROMs.
2434 *
2435 * This routine is largely lifted from Matt Thomas's `de' driver.
2436 */
2437 int
2438 tlp_parse_old_srom(struct tulip_softc *sc, uint8_t *enaddr)
2439 {
2440 static const uint8_t testpat[] =
2441 { 0xff, 0, 0x55, 0xaa, 0xff, 0, 0x55, 0xaa };
2442 int i;
2443 uint32_t cksum;
2444
2445 if (memcmp(&sc->sc_srom[0], &sc->sc_srom[16], 8) != 0) {
2446 /*
2447 * Phobos G100 interfaces have the address at
2448 * offsets 0 and 20, but each pair of bytes is
2449 * swapped.
2450 */
2451 if (sc->sc_srom_addrbits == 6 &&
2452 sc->sc_srom[1] == 0x00 &&
2453 sc->sc_srom[0] == 0x60 &&
2454 sc->sc_srom[3] == 0xf5 &&
2455 memcmp(&sc->sc_srom[0], &sc->sc_srom[20], 6) == 0) {
2456 for (i = 0; i < 6; i += 2) {
2457 enaddr[i] = sc->sc_srom[i + 1];
2458 enaddr[i + 1] = sc->sc_srom[i];
2459 }
2460 return (1);
2461 }
2462
2463 /*
2464 * Phobos G130/G160 interfaces have the address at
2465 * offsets 20 and 84, but each pair of bytes is
2466 * swapped.
2467 */
2468 if (sc->sc_srom_addrbits == 6 &&
2469 sc->sc_srom[21] == 0x00 &&
2470 sc->sc_srom[20] == 0x60 &&
2471 sc->sc_srom[23] == 0xf5 &&
2472 memcmp(&sc->sc_srom[20], &sc->sc_srom[84], 6) == 0) {
2473 for (i = 0; i < 6; i += 2) {
2474 enaddr[i] = sc->sc_srom[20 + i + 1];
2475 enaddr[i + 1] = sc->sc_srom[20 + i];
2476 }
2477 return (1);
2478 }
2479
2480 /*
2481 * Cobalt Networks interfaces simply have the address
2482 * in the first six bytes. The rest is zeroed out
2483 * on some models, but others contain unknown data.
2484 */
2485 if (sc->sc_srom[0] == 0x00 &&
2486 sc->sc_srom[1] == 0x10 &&
2487 sc->sc_srom[2] == 0xe0) {
2488 memcpy(enaddr, sc->sc_srom, ETHER_ADDR_LEN);
2489 return (1);
2490 }
2491
2492 /*
2493 * Some vendors (e.g. ZNYX) don't use the standard
2494 * DEC Address ROM format, but rather just have an
2495 * Ethernet address in the first 6 bytes, maybe a
2496 * 2 byte checksum, and then all 0xff's.
2497 */
2498 for (i = 8; i < 32; i++) {
2499 if (sc->sc_srom[i] != 0xff &&
2500 sc->sc_srom[i] != 0)
2501 return (0);
2502 }
2503
2504 /*
2505 * Sanity check the Ethernet address:
2506 *
2507 * - Make sure it's not multicast or locally
2508 * assigned
2509 * - Make sure it has a non-0 OUI
2510 */
2511 if (sc->sc_srom[0] & 3)
2512 return (0);
2513 if (sc->sc_srom[0] == 0 && sc->sc_srom[1] == 0 &&
2514 sc->sc_srom[2] == 0)
2515 return (0);
2516
2517 memcpy(enaddr, sc->sc_srom, ETHER_ADDR_LEN);
2518 return (1);
2519 }
2520
2521 /*
2522 * Standard DEC Address ROM test.
2523 */
2524
2525 if (memcmp(&sc->sc_srom[24], testpat, 8) != 0)
2526 return (0);
2527
2528 for (i = 0; i < 8; i++) {
2529 if (sc->sc_srom[i] != sc->sc_srom[15 - i])
2530 return (0);
2531 }
2532
2533 memcpy(enaddr, sc->sc_srom, ETHER_ADDR_LEN);
2534
2535 cksum = *(uint16_t *) &enaddr[0];
2536
2537 cksum <<= 1;
2538 if (cksum > 0xffff)
2539 cksum -= 0xffff;
2540
2541 cksum += *(uint16_t *) &enaddr[2];
2542 if (cksum > 0xffff)
2543 cksum -= 0xffff;
2544
2545 cksum <<= 1;
2546 if (cksum > 0xffff)
2547 cksum -= 0xffff;
2548
2549 cksum += *(uint16_t *) &enaddr[4];
2550 if (cksum >= 0xffff)
2551 cksum -= 0xffff;
2552
2553 if (cksum != *(uint16_t *) &sc->sc_srom[6])
2554 return (0);
2555
2556 return (1);
2557 }
2558
2559 /*
2560 * tlp_filter_setup:
2561 *
2562 * Set the Tulip's receive filter.
2563 */
2564 static void
2565 tlp_filter_setup(struct tulip_softc *sc)
2566 {
2567 struct ethercom *ec = &sc->sc_ethercom;
2568 struct ifnet *ifp = &sc->sc_ethercom.ec_if;
2569 struct ether_multi *enm;
2570 struct ether_multistep step;
2571 volatile uint32_t *sp;
2572 struct tulip_txsoft *txs;
2573 uint8_t enaddr[ETHER_ADDR_LEN];
2574 uint32_t hash, hashsize;
2575 int cnt, nexttx;
2576
2577 DPRINTF(sc, ("%s: tlp_filter_setup: sc_flags 0x%08x\n",
2578 device_xname(sc->sc_dev), sc->sc_flags));
2579
2580 memcpy(enaddr, CLLADDR(ifp->if_sadl), ETHER_ADDR_LEN);
2581
2582 /*
2583 * If there are transmissions pending, wait until they have
2584 * completed.
2585 */
2586 if (! SIMPLEQ_EMPTY(&sc->sc_txdirtyq) ||
2587 (sc->sc_flags & TULIPF_DOING_SETUP) != 0) {
2588 sc->sc_flags |= TULIPF_WANT_SETUP;
2589 DPRINTF(sc, ("%s: tlp_filter_setup: deferring\n",
2590 device_xname(sc->sc_dev)));
2591 return;
2592 }
2593 sc->sc_flags &= ~TULIPF_WANT_SETUP;
2594
2595 switch (sc->sc_chip) {
2596 case TULIP_CHIP_82C115:
2597 hashsize = TULIP_PNICII_HASHSIZE;
2598 break;
2599
2600 default:
2601 hashsize = TULIP_MCHASHSIZE;
2602 }
2603
2604 /*
2605 * If we're running, idle the transmit and receive engines. If
2606 * we're NOT running, we're being called from tlp_init(), and our
2607 * writing OPMODE will start the transmit and receive processes
2608 * in motion.
2609 */
2610 if (ifp->if_flags & IFF_RUNNING)
2611 tlp_idle(sc, OPMODE_ST|OPMODE_SR);
2612
2613 sc->sc_opmode &= ~(OPMODE_PR|OPMODE_PM);
2614
2615 if (ifp->if_flags & IFF_PROMISC) {
2616 sc->sc_opmode |= OPMODE_PR;
2617 goto allmulti;
2618 }
2619
2620 /*
2621 * Try Perfect filtering first.
2622 */
2623
2624 sc->sc_filtmode = TDCTL_Tx_FT_PERFECT;
2625 sp = TULIP_CDSP(sc);
2626 memset(TULIP_CDSP(sc), 0, TULIP_SETUP_PACKET_LEN);
2627 cnt = 0;
2628 ETHER_FIRST_MULTI(step, ec, enm);
2629 while (enm != NULL) {
2630 if (memcmp(enm->enm_addrlo, enm->enm_addrhi, ETHER_ADDR_LEN)) {
2631 /*
2632 * We must listen to a range of multicast addresses.
2633 * For now, just accept all multicasts, rather than
2634 * trying to set only those filter bits needed to match
2635 * the range. (At this time, the only use of address
2636 * ranges is for IP multicast routing, for which the
2637 * range is big enough to require all bits set.)
2638 */
2639 goto allmulti;
2640 }
2641 if (cnt == (TULIP_MAXADDRS - 2)) {
2642 /*
2643 * We already have our multicast limit (still need
2644 * our station address and broadcast). Go to
2645 * Hash-Perfect mode.
2646 */
2647 goto hashperfect;
2648 }
2649 cnt++;
2650 *sp++ = htole32(TULIP_SP_FIELD(enm->enm_addrlo, 0));
2651 *sp++ = htole32(TULIP_SP_FIELD(enm->enm_addrlo, 1));
2652 *sp++ = htole32(TULIP_SP_FIELD(enm->enm_addrlo, 2));
2653 ETHER_NEXT_MULTI(step, enm);
2654 }
2655
2656 if (ifp->if_flags & IFF_BROADCAST) {
2657 /* ...and the broadcast address. */
2658 cnt++;
2659 *sp++ = htole32(TULIP_SP_FIELD_C(0xff, 0xff));
2660 *sp++ = htole32(TULIP_SP_FIELD_C(0xff, 0xff));
2661 *sp++ = htole32(TULIP_SP_FIELD_C(0xff, 0xff));
2662 }
2663
2664 /* Pad the rest with our station address. */
2665 for (; cnt < TULIP_MAXADDRS; cnt++) {
2666 *sp++ = htole32(TULIP_SP_FIELD(enaddr, 0));
2667 *sp++ = htole32(TULIP_SP_FIELD(enaddr, 1));
2668 *sp++ = htole32(TULIP_SP_FIELD(enaddr, 2));
2669 }
2670 ifp->if_flags &= ~IFF_ALLMULTI;
2671 goto setit;
2672
2673 hashperfect:
2674 /*
2675 * Try Hash-Perfect mode.
2676 */
2677
2678 /*
2679 * Some 21140 chips have broken Hash-Perfect modes. On these
2680 * chips, we simply use Hash-Only mode, and put our station
2681 * address into the filter.
2682 */
2683 if (sc->sc_chip == TULIP_CHIP_21140)
2684 sc->sc_filtmode = TDCTL_Tx_FT_HASHONLY;
2685 else
2686 sc->sc_filtmode = TDCTL_Tx_FT_HASH;
2687 sp = TULIP_CDSP(sc);
2688 memset(TULIP_CDSP(sc), 0, TULIP_SETUP_PACKET_LEN);
2689 ETHER_FIRST_MULTI(step, ec, enm);
2690 while (enm != NULL) {
2691 if (memcmp(enm->enm_addrlo, enm->enm_addrhi, ETHER_ADDR_LEN)) {
2692 /*
2693 * We must listen to a range of multicast addresses.
2694 * For now, just accept all multicasts, rather than
2695 * trying to set only those filter bits needed to match
2696 * the range. (At this time, the only use of address
2697 * ranges is for IP multicast routing, for which the
2698 * range is big enough to require all bits set.)
2699 */
2700 goto allmulti;
2701 }
2702 hash = tlp_mchash(enm->enm_addrlo, hashsize);
2703 sp[hash >> 4] |= htole32(1 << (hash & 0xf));
2704 ETHER_NEXT_MULTI(step, enm);
2705 }
2706
2707 if (ifp->if_flags & IFF_BROADCAST) {
2708 /* ...and the broadcast address. */
2709 hash = tlp_mchash(etherbroadcastaddr, hashsize);
2710 sp[hash >> 4] |= htole32(1 << (hash & 0xf));
2711 }
2712
2713 if (sc->sc_filtmode == TDCTL_Tx_FT_HASHONLY) {
2714 /* ...and our station address. */
2715 hash = tlp_mchash(enaddr, hashsize);
2716 sp[hash >> 4] |= htole32(1 << (hash & 0xf));
2717 } else {
2718 /*
2719 * Hash-Perfect mode; put our station address after
2720 * the hash table.
2721 */
2722 sp[39] = htole32(TULIP_SP_FIELD(enaddr, 0));
2723 sp[40] = htole32(TULIP_SP_FIELD(enaddr, 1));
2724 sp[41] = htole32(TULIP_SP_FIELD(enaddr, 2));
2725 }
2726 ifp->if_flags &= ~IFF_ALLMULTI;
2727 goto setit;
2728
2729 allmulti:
2730 /*
2731 * Use Perfect filter mode. First address is the broadcast address,
2732 * and pad the rest with our station address. We'll set Pass-all-
2733 * multicast in OPMODE below.
2734 */
2735 sc->sc_filtmode = TDCTL_Tx_FT_PERFECT;
2736 sp = TULIP_CDSP(sc);
2737 memset(TULIP_CDSP(sc), 0, TULIP_SETUP_PACKET_LEN);
2738 cnt = 0;
2739 if (ifp->if_flags & IFF_BROADCAST) {
2740 cnt++;
2741 *sp++ = htole32(TULIP_SP_FIELD_C(0xff, 0xff));
2742 *sp++ = htole32(TULIP_SP_FIELD_C(0xff, 0xff));
2743 *sp++ = htole32(TULIP_SP_FIELD_C(0xff, 0xff));
2744 }
2745 for (; cnt < TULIP_MAXADDRS; cnt++) {
2746 *sp++ = htole32(TULIP_SP_FIELD(enaddr, 0));
2747 *sp++ = htole32(TULIP_SP_FIELD(enaddr, 1));
2748 *sp++ = htole32(TULIP_SP_FIELD(enaddr, 2));
2749 }
2750 ifp->if_flags |= IFF_ALLMULTI;
2751
2752 setit:
2753 if (ifp->if_flags & IFF_ALLMULTI)
2754 sc->sc_opmode |= OPMODE_PM;
2755
2756 /* Sync the setup packet buffer. */
2757 TULIP_CDSPSYNC(sc, BUS_DMASYNC_PREWRITE);
2758
2759 /*
2760 * Fill in the setup packet descriptor.
2761 */
2762 txs = SIMPLEQ_FIRST(&sc->sc_txfreeq);
2763
2764 txs->txs_firstdesc = sc->sc_txnext;
2765 txs->txs_lastdesc = sc->sc_txnext;
2766 txs->txs_ndescs = 1;
2767 txs->txs_mbuf = NULL;
2768
2769 nexttx = sc->sc_txnext;
2770 sc->sc_txdescs[nexttx].td_status = 0;
2771 sc->sc_txdescs[nexttx].td_bufaddr1 = htole32(TULIP_CDSPADDR(sc));
2772 sc->sc_txdescs[nexttx].td_ctl =
2773 htole32((TULIP_SETUP_PACKET_LEN << TDCTL_SIZE1_SHIFT) |
2774 sc->sc_filtmode | TDCTL_Tx_SET | sc->sc_setup_fsls |
2775 TDCTL_Tx_IC | sc->sc_tdctl_ch |
2776 (nexttx == (TULIP_NTXDESC - 1) ? sc->sc_tdctl_er : 0));
2777 TULIP_CDTXSYNC(sc, nexttx, 1,
2778 BUS_DMASYNC_PREREAD|BUS_DMASYNC_PREWRITE);
2779
2780 #ifdef TLP_DEBUG
2781 if (ifp->if_flags & IFF_DEBUG) {
2782 printf(" filter_setup %p transmit chain:\n", txs);
2783 printf(" descriptor %d:\n", nexttx);
2784 printf(" td_status: 0x%08x\n",
2785 le32toh(sc->sc_txdescs[nexttx].td_status));
2786 printf(" td_ctl: 0x%08x\n",
2787 le32toh(sc->sc_txdescs[nexttx].td_ctl));
2788 printf(" td_bufaddr1: 0x%08x\n",
2789 le32toh(sc->sc_txdescs[nexttx].td_bufaddr1));
2790 printf(" td_bufaddr2: 0x%08x\n",
2791 le32toh(sc->sc_txdescs[nexttx].td_bufaddr2));
2792 }
2793 #endif
2794
2795 sc->sc_txdescs[nexttx].td_status = htole32(TDSTAT_OWN);
2796 TULIP_CDTXSYNC(sc, nexttx, 1,
2797 BUS_DMASYNC_PREREAD|BUS_DMASYNC_PREWRITE);
2798
2799 /* Advance the tx pointer. */
2800 sc->sc_txfree -= 1;
2801 sc->sc_txnext = TULIP_NEXTTX(nexttx);
2802
2803 SIMPLEQ_REMOVE_HEAD(&sc->sc_txfreeq, txs_q);
2804 SIMPLEQ_INSERT_TAIL(&sc->sc_txdirtyq, txs, txs_q);
2805
2806 /*
2807 * Set the OPMODE register. This will also resume the
2808 * transmit process we idled above.
2809 */
2810 TULIP_WRITE(sc, CSR_OPMODE, sc->sc_opmode);
2811
2812 sc->sc_flags |= TULIPF_DOING_SETUP;
2813
2814 /*
2815 * Kick the transmitter; this will cause the Tulip to
2816 * read the setup descriptor.
2817 */
2818 /* XXX USE AUTOPOLLING? */
2819 TULIP_WRITE(sc, CSR_TXPOLL, TXPOLL_TPD);
2820
2821 /* Set up a watchdog timer in case the chip flakes out. */
2822 ifp->if_timer = 5;
2823
2824 DPRINTF(sc, ("%s: tlp_filter_setup: returning\n", device_xname(sc->sc_dev)));
2825 }
2826
2827 /*
2828 * tlp_winb_filter_setup:
2829 *
2830 * Set the Winbond 89C840F's receive filter.
2831 */
2832 static void
2833 tlp_winb_filter_setup(struct tulip_softc *sc)
2834 {
2835 struct ethercom *ec = &sc->sc_ethercom;
2836 struct ifnet *ifp = &sc->sc_ethercom.ec_if;
2837 struct ether_multi *enm;
2838 struct ether_multistep step;
2839 uint32_t hash, mchash[2];
2840
2841 DPRINTF(sc, ("%s: tlp_winb_filter_setup: sc_flags 0x%08x\n",
2842 device_xname(sc->sc_dev), sc->sc_flags));
2843
2844 sc->sc_opmode &= ~(OPMODE_WINB_APP|OPMODE_WINB_AMP|OPMODE_WINB_ABP);
2845
2846 if (ifp->if_flags & IFF_MULTICAST)
2847 sc->sc_opmode |= OPMODE_WINB_AMP;
2848
2849 if (ifp->if_flags & IFF_BROADCAST)
2850 sc->sc_opmode |= OPMODE_WINB_ABP;
2851
2852 if (ifp->if_flags & IFF_PROMISC) {
2853 sc->sc_opmode |= OPMODE_WINB_APP;
2854 goto allmulti;
2855 }
2856
2857 mchash[0] = mchash[1] = 0;
2858
2859 ETHER_FIRST_MULTI(step, ec, enm);
2860 while (enm != NULL) {
2861 if (memcmp(enm->enm_addrlo, enm->enm_addrhi, ETHER_ADDR_LEN)) {
2862 /*
2863 * We must listen to a range of multicast addresses.
2864 * For now, just accept all multicasts, rather than
2865 * trying to set only those filter bits needed to match
2866 * the range. (At this time, the only use of address
2867 * ranges is for IP multicast routing, for which the
2868 * range is big enough to require all bits set.)
2869 */
2870 goto allmulti;
2871 }
2872
2873 /*
2874 * According to the FreeBSD `wb' driver, yes, you
2875 * really do invert the hash.
2876 */
2877 hash =
2878 (~(ether_crc32_le(enm->enm_addrlo, ETHER_ADDR_LEN) >> 26))
2879 & 0x3f;
2880 mchash[hash >> 5] |= 1 << (hash & 0x1f);
2881 ETHER_NEXT_MULTI(step, enm);
2882 }
2883 ifp->if_flags &= ~IFF_ALLMULTI;
2884 goto setit;
2885
2886 allmulti:
2887 ifp->if_flags |= IFF_ALLMULTI;
2888 mchash[0] = mchash[1] = 0xffffffff;
2889
2890 setit:
2891 TULIP_WRITE(sc, CSR_WINB_CMA0, mchash[0]);
2892 TULIP_WRITE(sc, CSR_WINB_CMA1, mchash[1]);
2893 TULIP_WRITE(sc, CSR_OPMODE, sc->sc_opmode);
2894 DPRINTF(sc, ("%s: tlp_winb_filter_setup: returning\n",
2895 device_xname(sc->sc_dev)));
2896 }
2897
2898 /*
2899 * tlp_al981_filter_setup:
2900 *
2901 * Set the ADMtek AL981's receive filter.
2902 */
2903 static void
2904 tlp_al981_filter_setup(struct tulip_softc *sc)
2905 {
2906 struct ethercom *ec = &sc->sc_ethercom;
2907 struct ifnet *ifp = &sc->sc_ethercom.ec_if;
2908 struct ether_multi *enm;
2909 struct ether_multistep step;
2910 uint32_t hash, mchash[2];
2911
2912 /*
2913 * If the chip is running, we need to reset the interface,
2914 * and will revisit here (with IFF_RUNNING) clear. The
2915 * chip seems to really not like to have its multicast
2916 * filter programmed without a reset.
2917 */
2918 if (ifp->if_flags & IFF_RUNNING) {
2919 (void) tlp_init(ifp);
2920 return;
2921 }
2922
2923 DPRINTF(sc, ("%s: tlp_al981_filter_setup: sc_flags 0x%08x\n",
2924 device_xname(sc->sc_dev), sc->sc_flags));
2925
2926 sc->sc_opmode &= ~(OPMODE_PR|OPMODE_PM);
2927
2928 if (ifp->if_flags & IFF_PROMISC) {
2929 sc->sc_opmode |= OPMODE_PR;
2930 goto allmulti;
2931 }
2932
2933 mchash[0] = mchash[1] = 0;
2934
2935 ETHER_FIRST_MULTI(step, ec, enm);
2936 while (enm != NULL) {
2937 if (memcmp(enm->enm_addrlo, enm->enm_addrhi, ETHER_ADDR_LEN)) {
2938 /*
2939 * We must listen to a range of multicast addresses.
2940 * For now, just accept all multicasts, rather than
2941 * trying to set only those filter bits needed to match
2942 * the range. (At this time, the only use of address
2943 * ranges is for IP multicast routing, for which the
2944 * range is big enough to require all bits set.)
2945 */
2946 goto allmulti;
2947 }
2948
2949 hash = ether_crc32_le(enm->enm_addrlo, ETHER_ADDR_LEN) & 0x3f;
2950 mchash[hash >> 5] |= 1 << (hash & 0x1f);
2951 ETHER_NEXT_MULTI(step, enm);
2952 }
2953 ifp->if_flags &= ~IFF_ALLMULTI;
2954 goto setit;
2955
2956 allmulti:
2957 ifp->if_flags |= IFF_ALLMULTI;
2958 mchash[0] = mchash[1] = 0xffffffff;
2959
2960 setit:
2961 bus_space_write_4(sc->sc_st, sc->sc_sh, CSR_ADM_MAR0, mchash[0]);
2962 bus_space_write_4(sc->sc_st, sc->sc_sh, CSR_ADM_MAR1, mchash[1]);
2963 TULIP_WRITE(sc, CSR_OPMODE, sc->sc_opmode);
2964 DPRINTF(sc, ("%s: tlp_al981_filter_setup: returning\n",
2965 device_xname(sc->sc_dev)));
2966 }
2967
2968 /*
2969 * tlp_asix_filter_setup:
2970 *
2971 * Set the ASIX AX8814x recieve filter.
2972 */
2973 static void
2974 tlp_asix_filter_setup(struct tulip_softc *sc)
2975 {
2976 struct ethercom *ec = &sc->sc_ethercom;
2977 struct ifnet *ifp = &sc->sc_ethercom.ec_if;
2978 struct ether_multi *enm;
2979 struct ether_multistep step;
2980 uint32_t hash, mchash[2];
2981
2982 DPRINTF(sc, ("%s: tlp_asix_filter_setup: sc_flags 0x%08x\n",
2983 device_xname(sc->sc_dev), sc->sc_flags));
2984
2985 sc->sc_opmode &= ~(OPMODE_PM|OPMODE_AX_RB|OPMODE_PR);
2986
2987 if (ifp->if_flags & IFF_MULTICAST)
2988 sc->sc_opmode |= OPMODE_PM;
2989
2990 if (ifp->if_flags & IFF_BROADCAST)
2991 sc->sc_opmode |= OPMODE_AX_RB;
2992
2993 if (ifp->if_flags & IFF_PROMISC) {
2994 sc->sc_opmode |= OPMODE_PR;
2995 goto allmulti;
2996 }
2997
2998 mchash[0] = mchash[1] = 0;
2999
3000 ETHER_FIRST_MULTI(step, ec, enm);
3001 while (enm != NULL) {
3002 if (memcmp(enm->enm_addrlo, enm->enm_addrhi, ETHER_ADDR_LEN)) {
3003 /*
3004 * We must listen to a range of multicast addresses.
3005 * For now, just accept all multicasts, rather than
3006 * trying to set only those filter bits needed to match
3007 * the range. (At this time, the only use of address
3008 * ranges is for IP multicast routing, for which the
3009 * range is big enough to require all bits set.)
3010 */
3011 goto allmulti;
3012 }
3013 hash = (ether_crc32_be(enm->enm_addrlo, ETHER_ADDR_LEN) >> 26)
3014 & 0x3f;
3015 if (hash < 32)
3016 mchash[0] |= (1 << hash);
3017 else
3018 mchash[1] |= (1 << (hash - 32));
3019 ETHER_NEXT_MULTI(step, enm);
3020 }
3021 ifp->if_flags &= ~IFF_ALLMULTI;
3022 goto setit;
3023
3024 allmulti:
3025 ifp->if_flags |= IFF_ALLMULTI;
3026 mchash[0] = mchash[1] = 0xffffffff;
3027
3028 setit:
3029 TULIP_WRITE(sc, CSR_AX_FILTIDX, AX_FILTIDX_MAR0);
3030 TULIP_WRITE(sc, CSR_AX_FILTDATA, mchash[0]);
3031 TULIP_WRITE(sc, CSR_AX_FILTIDX, AX_FILTIDX_MAR1);
3032 TULIP_WRITE(sc, CSR_AX_FILTDATA, mchash[1]);
3033 TULIP_WRITE(sc, CSR_OPMODE, sc->sc_opmode);
3034 DPRINTF(sc, ("%s: tlp_asix_filter_setup: returning\n",
3035 device_xname(sc->sc_dev)));
3036 }
3037
3038
3039 /*
3040 * tlp_idle:
3041 *
3042 * Cause the transmit and/or receive processes to go idle.
3043 */
3044 void
3045 tlp_idle(struct tulip_softc *sc, uint32_t bits)
3046 {
3047 static const char * const tlp_tx_state_names[] = {
3048 "STOPPED",
3049 "RUNNING - FETCH",
3050 "RUNNING - WAIT",
3051 "RUNNING - READING",
3052 "-- RESERVED --",
3053 "RUNNING - SETUP",
3054 "SUSPENDED",
3055 "RUNNING - CLOSE",
3056 };
3057 static const char * const tlp_rx_state_names[] = {
3058 "STOPPED",
3059 "RUNNING - FETCH",
3060 "RUNNING - CHECK",
3061 "RUNNING - WAIT",
3062 "SUSPENDED",
3063 "RUNNING - CLOSE",
3064 "RUNNING - FLUSH",
3065 "RUNNING - QUEUE",
3066 };
3067 static const char * const dm9102_tx_state_names[] = {
3068 "STOPPED",
3069 "RUNNING - FETCH",
3070 "RUNNING - SETUP",
3071 "RUNNING - READING",
3072 "RUNNING - CLOSE - CLEAR OWNER",
3073 "RUNNING - WAIT",
3074 "RUNNING - CLOSE - WRITE STATUS",
3075 "SUSPENDED",
3076 };
3077 static const char * const dm9102_rx_state_names[] = {
3078 "STOPPED",
3079 "RUNNING - FETCH",
3080 "RUNNING - WAIT",
3081 "RUNNING - QUEUE",
3082 "RUNNING - CLOSE - CLEAR OWNER",
3083 "RUNNING - CLOSE - WRITE STATUS",
3084 "SUSPENDED",
3085 "RUNNING - FLUSH",
3086 };
3087
3088 const char * const *tx_state_names, * const *rx_state_names;
3089 uint32_t csr, ackmask = 0;
3090 int i;
3091
3092 switch (sc->sc_chip) {
3093 case TULIP_CHIP_DM9102:
3094 case TULIP_CHIP_DM9102A:
3095 tx_state_names = dm9102_tx_state_names;
3096 rx_state_names = dm9102_rx_state_names;
3097 break;
3098
3099 default:
3100 tx_state_names = tlp_tx_state_names;
3101 rx_state_names = tlp_rx_state_names;
3102 break;
3103 }
3104
3105 if (bits & OPMODE_ST)
3106 ackmask |= STATUS_TPS;
3107
3108 if (bits & OPMODE_SR)
3109 ackmask |= STATUS_RPS;
3110
3111 TULIP_WRITE(sc, CSR_OPMODE, sc->sc_opmode & ~bits);
3112
3113 for (i = 0; i < 1000; i++) {
3114 if (TULIP_ISSET(sc, CSR_STATUS, ackmask) == ackmask)
3115 break;
3116 delay(10);
3117 }
3118
3119 csr = TULIP_READ(sc, CSR_STATUS);
3120 if ((csr & ackmask) != ackmask) {
3121 if ((bits & OPMODE_ST) != 0 && (csr & STATUS_TPS) == 0 &&
3122 (csr & STATUS_TS) != STATUS_TS_STOPPED) {
3123 switch (sc->sc_chip) {
3124 case TULIP_CHIP_AX88140:
3125 case TULIP_CHIP_AX88141:
3126 /*
3127 * Filter the message out on noisy chips.
3128 */
3129 break;
3130 default:
3131 printf("%s: transmit process failed to idle: "
3132 "state %s\n", device_xname(sc->sc_dev),
3133 tx_state_names[(csr & STATUS_TS) >> 20]);
3134 }
3135 }
3136 if ((bits & OPMODE_SR) != 0 && (csr & STATUS_RPS) == 0 &&
3137 (csr & STATUS_RS) != STATUS_RS_STOPPED) {
3138 switch (sc->sc_chip) {
3139 case TULIP_CHIP_AN983:
3140 case TULIP_CHIP_AN985:
3141 case TULIP_CHIP_DM9102A:
3142 case TULIP_CHIP_RS7112:
3143 /*
3144 * Filter the message out on noisy chips.
3145 */
3146 break;
3147 default:
3148 printf("%s: receive process failed to idle: "
3149 "state %s\n", device_xname(sc->sc_dev),
3150 rx_state_names[(csr & STATUS_RS) >> 17]);
3151 }
3152 }
3153 }
3154 TULIP_WRITE(sc, CSR_STATUS, ackmask);
3155 }
3156
3157 /*****************************************************************************
3158 * Generic media support functions.
3159 *****************************************************************************/
3160
3161 /*
3162 * tlp_mediastatus: [ifmedia interface function]
3163 *
3164 * Query the current media.
3165 */
3166 void
3167 tlp_mediastatus(struct ifnet *ifp, struct ifmediareq *ifmr)
3168 {
3169 struct tulip_softc *sc = ifp->if_softc;
3170
3171 if (TULIP_IS_ENABLED(sc) == 0) {
3172 ifmr->ifm_active = IFM_ETHER | IFM_NONE;
3173 ifmr->ifm_status = 0;
3174 return;
3175 }
3176
3177 (*sc->sc_mediasw->tmsw_get)(sc, ifmr);
3178 }
3179
3180 /*
3181 * tlp_mediachange: [ifmedia interface function]
3182 *
3183 * Update the current media.
3184 */
3185 int
3186 tlp_mediachange(struct ifnet *ifp)
3187 {
3188 struct tulip_softc *sc = ifp->if_softc;
3189
3190 if ((ifp->if_flags & IFF_UP) == 0)
3191 return (0);
3192 return ((*sc->sc_mediasw->tmsw_set)(sc));
3193 }
3194
3195 /*****************************************************************************
3196 * Support functions for MII-attached media.
3197 *****************************************************************************/
3198
3199 /*
3200 * tlp_mii_tick:
3201 *
3202 * One second timer, used to tick the MII.
3203 */
3204 static void
3205 tlp_mii_tick(void *arg)
3206 {
3207 struct tulip_softc *sc = arg;
3208 int s;
3209
3210 if (!device_is_active(sc->sc_dev))
3211 return;
3212
3213 s = splnet();
3214 mii_tick(&sc->sc_mii);
3215 splx(s);
3216
3217 callout_reset(&sc->sc_tick_callout, hz, sc->sc_tick, sc);
3218 }
3219
3220 /*
3221 * tlp_mii_statchg: [mii interface function]
3222 *
3223 * Callback from PHY when media changes.
3224 */
3225 static void
3226 tlp_mii_statchg(device_t self)
3227 {
3228 struct tulip_softc *sc = device_private(self);
3229
3230 /* Idle the transmit and receive processes. */
3231 tlp_idle(sc, OPMODE_ST|OPMODE_SR);
3232
3233 sc->sc_opmode &= ~(OPMODE_TTM|OPMODE_FD|OPMODE_HBD);
3234
3235 if (IFM_SUBTYPE(sc->sc_mii.mii_media_active) == IFM_10_T)
3236 sc->sc_opmode |= OPMODE_TTM;
3237 else
3238 sc->sc_opmode |= OPMODE_HBD;
3239
3240 if (sc->sc_mii.mii_media_active & IFM_FDX)
3241 sc->sc_opmode |= OPMODE_FD|OPMODE_HBD;
3242
3243 /*
3244 * Write new OPMODE bits. This also restarts the transmit
3245 * and receive processes.
3246 */
3247 TULIP_WRITE(sc, CSR_OPMODE, sc->sc_opmode);
3248 }
3249
3250 /*
3251 * tlp_winb_mii_statchg: [mii interface function]
3252 *
3253 * Callback from PHY when media changes. This version is
3254 * for the Winbond 89C840F, which has different OPMODE bits.
3255 */
3256 static void
3257 tlp_winb_mii_statchg(device_t self)
3258 {
3259 struct tulip_softc *sc = device_private(self);
3260
3261 /* Idle the transmit and receive processes. */
3262 tlp_idle(sc, OPMODE_ST|OPMODE_SR);
3263
3264 sc->sc_opmode &= ~(OPMODE_WINB_FES|OPMODE_FD);
3265
3266 if (IFM_SUBTYPE(sc->sc_mii.mii_media_active) == IFM_100_TX)
3267 sc->sc_opmode |= OPMODE_WINB_FES;
3268
3269 if (sc->sc_mii.mii_media_active & IFM_FDX)
3270 sc->sc_opmode |= OPMODE_FD;
3271
3272 /*
3273 * Write new OPMODE bits. This also restarts the transmit
3274 * and receive processes.
3275 */
3276 TULIP_WRITE(sc, CSR_OPMODE, sc->sc_opmode);
3277 }
3278
3279 /*
3280 * tlp_dm9102_mii_statchg: [mii interface function]
3281 *
3282 * Callback from PHY when media changes. This version is
3283 * for the DM9102.
3284 */
3285 static void
3286 tlp_dm9102_mii_statchg(device_t self)
3287 {
3288 struct tulip_softc *sc = device_private(self);
3289
3290 /*
3291 * Don't idle the transmit and receive processes, here. It
3292 * seems to fail, and just causes excess noise.
3293 */
3294 sc->sc_opmode &= ~(OPMODE_TTM|OPMODE_FD);
3295
3296 if (IFM_SUBTYPE(sc->sc_mii.mii_media_active) != IFM_100_TX)
3297 sc->sc_opmode |= OPMODE_TTM;
3298
3299 if (sc->sc_mii.mii_media_active & IFM_FDX)
3300 sc->sc_opmode |= OPMODE_FD;
3301
3302 /*
3303 * Write new OPMODE bits.
3304 */
3305 TULIP_WRITE(sc, CSR_OPMODE, sc->sc_opmode);
3306 }
3307
3308 /*
3309 * tlp_mii_getmedia:
3310 *
3311 * Callback from ifmedia to request current media status.
3312 */
3313 static void
3314 tlp_mii_getmedia(struct tulip_softc *sc, struct ifmediareq *ifmr)
3315 {
3316
3317 mii_pollstat(&sc->sc_mii);
3318 ifmr->ifm_status = sc->sc_mii.mii_media_status;
3319 ifmr->ifm_active = sc->sc_mii.mii_media_active;
3320 }
3321
3322 /*
3323 * tlp_mii_setmedia:
3324 *
3325 * Callback from ifmedia to request new media setting.
3326 */
3327 static int
3328 tlp_mii_setmedia(struct tulip_softc *sc)
3329 {
3330 struct ifnet *ifp = &sc->sc_ethercom.ec_if;
3331 int rc;
3332
3333 if ((ifp->if_flags & IFF_UP) == 0)
3334 return 0;
3335 switch (sc->sc_chip) {
3336 case TULIP_CHIP_21142:
3337 case TULIP_CHIP_21143:
3338 /* Disable the internal Nway engine. */
3339 TULIP_WRITE(sc, CSR_SIATXRX, 0);
3340 break;
3341
3342 default:
3343 /* Nothing. */
3344 break;
3345 }
3346 if ((rc = mii_mediachg(&sc->sc_mii)) == ENXIO)
3347 return 0;
3348 return rc;
3349 }
3350
3351 /*
3352 * tlp_bitbang_mii_readreg:
3353 *
3354 * Read a PHY register via bit-bang'ing the MII.
3355 */
3356 static int
3357 tlp_bitbang_mii_readreg(device_t self, int phy, int reg)
3358 {
3359 struct tulip_softc *sc = device_private(self);
3360
3361 return (mii_bitbang_readreg(self, sc->sc_bitbang_ops, phy, reg));
3362 }
3363
3364 /*
3365 * tlp_bitbang_mii_writereg:
3366 *
3367 * Write a PHY register via bit-bang'ing the MII.
3368 */
3369 static void
3370 tlp_bitbang_mii_writereg(device_t self, int phy, int reg, int val)
3371 {
3372 struct tulip_softc *sc = device_private(self);
3373
3374 mii_bitbang_writereg(self, sc->sc_bitbang_ops, phy, reg, val);
3375 }
3376
3377 /*
3378 * tlp_sio_mii_bitbang_read:
3379 *
3380 * Read the MII serial port for the MII bit-bang module.
3381 */
3382 static uint32_t
3383 tlp_sio_mii_bitbang_read(device_t self)
3384 {
3385 struct tulip_softc *sc = device_private(self);
3386
3387 return (TULIP_READ(sc, CSR_MIIROM));
3388 }
3389
3390 /*
3391 * tlp_sio_mii_bitbang_write:
3392 *
3393 * Write the MII serial port for the MII bit-bang module.
3394 */
3395 static void
3396 tlp_sio_mii_bitbang_write(device_t self, uint32_t val)
3397 {
3398 struct tulip_softc *sc = device_private(self);
3399
3400 TULIP_WRITE(sc, CSR_MIIROM, val);
3401 }
3402
3403 /*
3404 * tlp_pnic_mii_readreg:
3405 *
3406 * Read a PHY register on the Lite-On PNIC.
3407 */
3408 static int
3409 tlp_pnic_mii_readreg(device_t self, int phy, int reg)
3410 {
3411 struct tulip_softc *sc = device_private(self);
3412 uint32_t val;
3413 int i;
3414
3415 TULIP_WRITE(sc, CSR_PNIC_MII,
3416 PNIC_MII_MBO | PNIC_MII_RESERVED |
3417 PNIC_MII_READ | (phy << PNIC_MII_PHYSHIFT) |
3418 (reg << PNIC_MII_REGSHIFT));
3419
3420 for (i = 0; i < 1000; i++) {
3421 delay(10);
3422 val = TULIP_READ(sc, CSR_PNIC_MII);
3423 if ((val & PNIC_MII_BUSY) == 0) {
3424 if ((val & PNIC_MII_DATA) == PNIC_MII_DATA)
3425 return (0);
3426 else
3427 return (val & PNIC_MII_DATA);
3428 }
3429 }
3430 printf("%s: MII read timed out\n", device_xname(sc->sc_dev));
3431 return (0);
3432 }
3433
3434 /*
3435 * tlp_pnic_mii_writereg:
3436 *
3437 * Write a PHY register on the Lite-On PNIC.
3438 */
3439 static void
3440 tlp_pnic_mii_writereg(device_t self, int phy, int reg, int val)
3441 {
3442 struct tulip_softc *sc = device_private(self);
3443 int i;
3444
3445 TULIP_WRITE(sc, CSR_PNIC_MII,
3446 PNIC_MII_MBO | PNIC_MII_RESERVED |
3447 PNIC_MII_WRITE | (phy << PNIC_MII_PHYSHIFT) |
3448 (reg << PNIC_MII_REGSHIFT) | val);
3449
3450 for (i = 0; i < 1000; i++) {
3451 delay(10);
3452 if (TULIP_ISSET(sc, CSR_PNIC_MII, PNIC_MII_BUSY) == 0)
3453 return;
3454 }
3455 printf("%s: MII write timed out\n", device_xname(sc->sc_dev));
3456 }
3457
3458 static const bus_addr_t tlp_al981_phy_regmap[] = {
3459 CSR_ADM_BMCR,
3460 CSR_ADM_BMSR,
3461 CSR_ADM_PHYIDR1,
3462 CSR_ADM_PHYIDR2,
3463 CSR_ADM_ANAR,
3464 CSR_ADM_ANLPAR,
3465 CSR_ADM_ANER,
3466
3467 CSR_ADM_XMC,
3468 CSR_ADM_XCIIS,
3469 CSR_ADM_XIE,
3470 CSR_ADM_100CTR,
3471 };
3472 static const int tlp_al981_phy_regmap_size = sizeof(tlp_al981_phy_regmap) /
3473 sizeof(tlp_al981_phy_regmap[0]);
3474
3475 /*
3476 * tlp_al981_mii_readreg:
3477 *
3478 * Read a PHY register on the ADMtek AL981.
3479 */
3480 static int
3481 tlp_al981_mii_readreg(device_t self, int phy, int reg)
3482 {
3483 struct tulip_softc *sc = device_private(self);
3484
3485 /* AL981 only has an internal PHY. */
3486 if (phy != 0)
3487 return (0);
3488
3489 if (reg >= tlp_al981_phy_regmap_size)
3490 return (0);
3491
3492 return (bus_space_read_4(sc->sc_st, sc->sc_sh,
3493 tlp_al981_phy_regmap[reg]) & 0xffff);
3494 }
3495
3496 /*
3497 * tlp_al981_mii_writereg:
3498 *
3499 * Write a PHY register on the ADMtek AL981.
3500 */
3501 static void
3502 tlp_al981_mii_writereg(device_t self, int phy, int reg, int val)
3503 {
3504 struct tulip_softc *sc = device_private(self);
3505
3506 /* AL981 only has an internal PHY. */
3507 if (phy != 0)
3508 return;
3509
3510 if (reg >= tlp_al981_phy_regmap_size)
3511 return;
3512
3513 bus_space_write_4(sc->sc_st, sc->sc_sh,
3514 tlp_al981_phy_regmap[reg], val);
3515 }
3516
3517 /*****************************************************************************
3518 * Chip-specific pre-init and reset functions.
3519 *****************************************************************************/
3520
3521 /*
3522 * tlp_2114x_preinit:
3523 *
3524 * Pre-init function shared by DECchip 21140, 21140A, 21142, and 21143.
3525 */
3526 static void
3527 tlp_2114x_preinit(struct tulip_softc *sc)
3528 {
3529 struct ifmedia_entry *ife = sc->sc_mii.mii_media.ifm_cur;
3530 struct tulip_21x4x_media *tm = ife->ifm_aux;
3531
3532 /*
3533 * Whether or not we're in MII or SIA/SYM mode, the media info
3534 * contains the appropriate OPMODE bits.
3535 *
3536 * Also, we always set the Must-Be-One bit.
3537 */
3538 sc->sc_opmode |= OPMODE_MBO | tm->tm_opmode;
3539
3540 TULIP_WRITE(sc, CSR_OPMODE, sc->sc_opmode);
3541 }
3542
3543 /*
3544 * tlp_2114x_mii_preinit:
3545 *
3546 * Pre-init function shared by DECchip 21140, 21140A, 21142, and 21143.
3547 * This version is used by boards which only have MII and don't have
3548 * an ISV SROM.
3549 */
3550 static void
3551 tlp_2114x_mii_preinit(struct tulip_softc *sc)
3552 {
3553
3554 /*
3555 * Always set the Must-Be-One bit, and Port Select (to select MII).
3556 * We'll never be called during a media change.
3557 */
3558 sc->sc_opmode |= OPMODE_MBO|OPMODE_PS;
3559 TULIP_WRITE(sc, CSR_OPMODE, sc->sc_opmode);
3560 }
3561
3562 /*
3563 * tlp_pnic_preinit:
3564 *
3565 * Pre-init function for the Lite-On 82c168 and 82c169.
3566 */
3567 static void
3568 tlp_pnic_preinit(struct tulip_softc *sc)
3569 {
3570
3571 if (sc->sc_flags & TULIPF_HAS_MII) {
3572 /*
3573 * MII case: just set the port-select bit; we will never
3574 * be called during a media change.
3575 */
3576 sc->sc_opmode |= OPMODE_PS;
3577 } else {
3578 /*
3579 * ENDEC/PCS/Nway mode; enable the Tx backoff counter.
3580 */
3581 sc->sc_opmode |= OPMODE_PNIC_TBEN;
3582 }
3583 }
3584
3585 /*
3586 * tlp_asix_preinit:
3587 *
3588 * Pre-init function for the ASIX chipsets.
3589 */
3590 static void
3591 tlp_asix_preinit(struct tulip_softc *sc)
3592 {
3593
3594 switch (sc->sc_chip) {
3595 case TULIP_CHIP_AX88140:
3596 case TULIP_CHIP_AX88141:
3597 /* XXX Handle PHY. */
3598 sc->sc_opmode |= OPMODE_HBD|OPMODE_PS;
3599 break;
3600 default:
3601 /* Nothing */
3602 break;
3603 }
3604
3605 TULIP_WRITE(sc, CSR_OPMODE, sc->sc_opmode);
3606 }
3607
3608 /*
3609 * tlp_dm9102_preinit:
3610 *
3611 * Pre-init function for the Davicom DM9102.
3612 */
3613 static void
3614 tlp_dm9102_preinit(struct tulip_softc *sc)
3615 {
3616
3617 switch (sc->sc_chip) {
3618 case TULIP_CHIP_DM9102:
3619 sc->sc_opmode |= OPMODE_MBO|OPMODE_HBD|OPMODE_PS;
3620 break;
3621
3622 case TULIP_CHIP_DM9102A:
3623 /*
3624 * XXX Figure out how to actually deal with the HomePNA
3625 * XXX portion of the DM9102A.
3626 */
3627 sc->sc_opmode |= OPMODE_MBO|OPMODE_HBD;
3628 break;
3629
3630 default:
3631 /* Nothing. */
3632 break;
3633 }
3634
3635 TULIP_WRITE(sc, CSR_OPMODE, sc->sc_opmode);
3636 }
3637
3638 /*
3639 * tlp_21140_reset:
3640 *
3641 * Issue a reset sequence on the 21140 via the GPIO facility.
3642 */
3643 static void
3644 tlp_21140_reset(struct tulip_softc *sc)
3645 {
3646 struct ifmedia_entry *ife = sc->sc_mii.mii_media.ifm_cur;
3647 struct tulip_21x4x_media *tm = ife->ifm_aux;
3648 int i;
3649
3650 /* First, set the direction on the GPIO pins. */
3651 TULIP_WRITE(sc, CSR_GPP, GPP_GPC|sc->sc_gp_dir);
3652
3653 /* Now, issue the reset sequence. */
3654 for (i = 0; i < tm->tm_reset_length; i++) {
3655 delay(10);
3656 TULIP_WRITE(sc, CSR_GPP, sc->sc_srom[tm->tm_reset_offset + i]);
3657 }
3658
3659 /* Now, issue the selection sequence. */
3660 for (i = 0; i < tm->tm_gp_length; i++) {
3661 delay(10);
3662 TULIP_WRITE(sc, CSR_GPP, sc->sc_srom[tm->tm_gp_offset + i]);
3663 }
3664
3665 /* If there were no sequences, just lower the pins. */
3666 if (tm->tm_reset_length == 0 && tm->tm_gp_length == 0) {
3667 delay(10);
3668 TULIP_WRITE(sc, CSR_GPP, 0);
3669 }
3670 }
3671
3672 /*
3673 * tlp_21142_reset:
3674 *
3675 * Issue a reset sequence on the 21142 via the GPIO facility.
3676 */
3677 static void
3678 tlp_21142_reset(struct tulip_softc *sc)
3679 {
3680 struct ifmedia_entry *ife = sc->sc_mii.mii_media.ifm_cur;
3681 struct tulip_21x4x_media *tm = ife->ifm_aux;
3682 const uint8_t *cp;
3683 int i;
3684
3685 cp = &sc->sc_srom[tm->tm_reset_offset];
3686 for (i = 0; i < tm->tm_reset_length; i++, cp += 2) {
3687 delay(10);
3688 TULIP_WRITE(sc, CSR_SIAGEN, TULIP_ROM_GETW(cp, 0) << 16);
3689 }
3690
3691 cp = &sc->sc_srom[tm->tm_gp_offset];
3692 for (i = 0; i < tm->tm_gp_length; i++, cp += 2) {
3693 delay(10);
3694 TULIP_WRITE(sc, CSR_SIAGEN, TULIP_ROM_GETW(cp, 0) << 16);
3695 }
3696
3697 /* If there were no sequences, just lower the pins. */
3698 if (tm->tm_reset_length == 0 && tm->tm_gp_length == 0) {
3699 delay(10);
3700 TULIP_WRITE(sc, CSR_SIAGEN, 0);
3701 }
3702 }
3703
3704 /*
3705 * tlp_pmac_reset:
3706 *
3707 * Reset routine for Macronix chips.
3708 */
3709 static void
3710 tlp_pmac_reset(struct tulip_softc *sc)
3711 {
3712
3713 switch (sc->sc_chip) {
3714 case TULIP_CHIP_82C115:
3715 case TULIP_CHIP_MX98715:
3716 case TULIP_CHIP_MX98715A:
3717 case TULIP_CHIP_MX98725:
3718 /*
3719 * Set the LED operating mode. This information is located
3720 * in the EEPROM at byte offset 0x77, per the MX98715A and
3721 * MX98725 application notes.
3722 */
3723 TULIP_WRITE(sc, CSR_MIIROM, sc->sc_srom[0x77] << 24);
3724 break;
3725 case TULIP_CHIP_MX98715AEC_X:
3726 /*
3727 * Set the LED operating mode. This information is located
3728 * in the EEPROM at byte offset 0x76, per the MX98715AEC
3729 * application note.
3730 */
3731 TULIP_WRITE(sc, CSR_MIIROM, ((0xf & sc->sc_srom[0x76]) << 28)
3732 | ((0xf0 & sc->sc_srom[0x76]) << 20));
3733 break;
3734
3735 default:
3736 /* Nothing. */
3737 break;
3738 }
3739 }
3740
3741 #if 0
3742 /*
3743 * tlp_dm9102_reset:
3744 *
3745 * Reset routine for the Davicom DM9102.
3746 */
3747 static void
3748 tlp_dm9102_reset(struct tulip_softc *sc)
3749 {
3750
3751 TULIP_WRITE(sc, CSR_DM_PHYSTAT, DM_PHYSTAT_GEPC|DM_PHYSTAT_GPED);
3752 delay(100);
3753 TULIP_WRITE(sc, CSR_DM_PHYSTAT, 0);
3754 }
3755 #endif
3756
3757 /*****************************************************************************
3758 * Chip/board-specific media switches. The ones here are ones that
3759 * are potentially common to multiple front-ends.
3760 *****************************************************************************/
3761
3762 /*
3763 * This table is a common place for all sorts of media information,
3764 * keyed off of the SROM media code for that media.
3765 *
3766 * Note that we explicitly configure the 21142/21143 to always advertise
3767 * NWay capabilities when using the UTP port.
3768 * XXX Actually, we don't yet.
3769 */
3770 static const struct tulip_srom_to_ifmedia tulip_srom_to_ifmedia_table[] = {
3771 { TULIP_ROM_MB_MEDIA_TP, IFM_10_T, 0,
3772 "10baseT",
3773 OPMODE_TTM,
3774 BMSR_10THDX,
3775 { SIACONN_21040_10BASET,
3776 SIATXRX_21040_10BASET,
3777 SIAGEN_21040_10BASET },
3778
3779 { SIACONN_21041_10BASET,
3780 SIATXRX_21041_10BASET,
3781 SIAGEN_21041_10BASET },
3782
3783 { SIACONN_21142_10BASET,
3784 SIATXRX_21142_10BASET,
3785 SIAGEN_21142_10BASET } },
3786
3787 { TULIP_ROM_MB_MEDIA_BNC, IFM_10_2, 0,
3788 "10base2",
3789 0,
3790 0,
3791 { 0,
3792 0,
3793 0 },
3794
3795 { SIACONN_21041_BNC,
3796 SIATXRX_21041_BNC,
3797 SIAGEN_21041_BNC },
3798
3799 { SIACONN_21142_BNC,
3800 SIATXRX_21142_BNC,
3801 SIAGEN_21142_BNC } },
3802
3803 { TULIP_ROM_MB_MEDIA_AUI, IFM_10_5, 0,
3804 "10base5",
3805 0,
3806 0,
3807 { SIACONN_21040_AUI,
3808 SIATXRX_21040_AUI,
3809 SIAGEN_21040_AUI },
3810
3811 { SIACONN_21041_AUI,
3812 SIATXRX_21041_AUI,
3813 SIAGEN_21041_AUI },
3814
3815 { SIACONN_21142_AUI,
3816 SIATXRX_21142_AUI,
3817 SIAGEN_21142_AUI } },
3818
3819 { TULIP_ROM_MB_MEDIA_100TX, IFM_100_TX, 0,
3820 "100baseTX",
3821 OPMODE_PS|OPMODE_PCS|OPMODE_SCR|OPMODE_HBD,
3822 BMSR_100TXHDX,
3823 { 0,
3824 0,
3825 0 },
3826
3827 { 0,
3828 0,
3829 0 },
3830
3831 { 0,
3832 0,
3833 SIAGEN_ABM } },
3834
3835 { TULIP_ROM_MB_MEDIA_TP_FDX, IFM_10_T, IFM_FDX,
3836 "10baseT-FDX",
3837 OPMODE_TTM|OPMODE_FD|OPMODE_HBD,
3838 BMSR_10TFDX,
3839 { SIACONN_21040_10BASET_FDX,
3840 SIATXRX_21040_10BASET_FDX,
3841 SIAGEN_21040_10BASET_FDX },
3842
3843 { SIACONN_21041_10BASET_FDX,
3844 SIATXRX_21041_10BASET_FDX,
3845 SIAGEN_21041_10BASET_FDX },
3846
3847 { SIACONN_21142_10BASET_FDX,
3848 SIATXRX_21142_10BASET_FDX,
3849 SIAGEN_21142_10BASET_FDX } },
3850
3851 { TULIP_ROM_MB_MEDIA_100TX_FDX, IFM_100_TX, IFM_FDX,
3852 "100baseTX-FDX",
3853 OPMODE_PS|OPMODE_PCS|OPMODE_SCR|OPMODE_FD|OPMODE_HBD,
3854 BMSR_100TXFDX,
3855 { 0,
3856 0,
3857 0 },
3858
3859 { 0,
3860 0,
3861 0 },
3862
3863 { 0,
3864 0,
3865 SIAGEN_ABM } },
3866
3867 { TULIP_ROM_MB_MEDIA_100T4, IFM_100_T4, 0,
3868 "100baseT4",
3869 OPMODE_PS|OPMODE_PCS|OPMODE_SCR|OPMODE_HBD,
3870 BMSR_100T4,
3871 { 0,
3872 0,
3873 0 },
3874
3875 { 0,
3876 0,
3877 0 },
3878
3879 { 0,
3880 0,
3881 SIAGEN_ABM } },
3882
3883 { TULIP_ROM_MB_MEDIA_100FX, IFM_100_FX, 0,
3884 "100baseFX",
3885 OPMODE_PS|OPMODE_PCS|OPMODE_HBD,
3886 0,
3887 { 0,
3888 0,
3889 0 },
3890
3891 { 0,
3892 0,
3893 0 },
3894
3895 { 0,
3896 0,
3897 SIAGEN_ABM } },
3898
3899 { TULIP_ROM_MB_MEDIA_100FX_FDX, IFM_100_FX, IFM_FDX,
3900 "100baseFX-FDX",
3901 OPMODE_PS|OPMODE_PCS|OPMODE_FD|OPMODE_HBD,
3902 0,
3903 { 0,
3904 0,
3905 0 },
3906
3907 { 0,
3908 0,
3909 0 },
3910
3911 { 0,
3912 0,
3913 SIAGEN_ABM } },
3914
3915 { 0, 0, 0,
3916 NULL,
3917 0,
3918 0,
3919 { 0,
3920 0,
3921 0 },
3922
3923 { 0,
3924 0,
3925 0 },
3926
3927 { 0,
3928 0,
3929 0 } },
3930 };
3931
3932 static const struct tulip_srom_to_ifmedia *tlp_srom_to_ifmedia(uint8_t);
3933 static void tlp_srom_media_info(struct tulip_softc *,
3934 const struct tulip_srom_to_ifmedia *,
3935 struct tulip_21x4x_media *);
3936 static void tlp_add_srom_media(struct tulip_softc *, int,
3937 void (*)(struct tulip_softc *, struct ifmediareq *),
3938 int (*)(struct tulip_softc *), const uint8_t *, int);
3939 static void tlp_print_media(struct tulip_softc *);
3940 static void tlp_nway_activate(struct tulip_softc *, int);
3941 static void tlp_get_minst(struct tulip_softc *);
3942
3943 static const struct tulip_srom_to_ifmedia *
3944 tlp_srom_to_ifmedia(uint8_t sm)
3945 {
3946 const struct tulip_srom_to_ifmedia *tsti;
3947
3948 for (tsti = tulip_srom_to_ifmedia_table;
3949 tsti->tsti_name != NULL; tsti++) {
3950 if (tsti->tsti_srom == sm)
3951 return (tsti);
3952 }
3953
3954 return (NULL);
3955 }
3956
3957 static void
3958 tlp_srom_media_info(struct tulip_softc *sc,
3959 const struct tulip_srom_to_ifmedia *tsti, struct tulip_21x4x_media *tm)
3960 {
3961
3962 tm->tm_name = tsti->tsti_name;
3963 tm->tm_opmode = tsti->tsti_opmode;
3964
3965 sc->sc_sia_cap |= tsti->tsti_sia_cap;
3966
3967 switch (sc->sc_chip) {
3968 case TULIP_CHIP_DE425:
3969 case TULIP_CHIP_21040:
3970 tm->tm_sia = tsti->tsti_21040; /* struct assignment */
3971 break;
3972
3973 case TULIP_CHIP_21041:
3974 tm->tm_sia = tsti->tsti_21041; /* struct assignment */
3975 break;
3976
3977 case TULIP_CHIP_21142:
3978 case TULIP_CHIP_21143:
3979 case TULIP_CHIP_82C115:
3980 case TULIP_CHIP_MX98715:
3981 case TULIP_CHIP_MX98715A:
3982 case TULIP_CHIP_MX98715AEC_X:
3983 case TULIP_CHIP_MX98725:
3984 tm->tm_sia = tsti->tsti_21142; /* struct assignment */
3985 break;
3986
3987 default:
3988 /* Nothing. */
3989 break;
3990 }
3991 }
3992
3993 static void
3994 tlp_add_srom_media(struct tulip_softc *sc, int type,
3995 void (*get)(struct tulip_softc *, struct ifmediareq *),
3996 int (*set)(struct tulip_softc *), const uint8_t *list,
3997 int cnt)
3998 {
3999 struct tulip_21x4x_media *tm;
4000 const struct tulip_srom_to_ifmedia *tsti;
4001 int i;
4002
4003 for (i = 0; i < cnt; i++) {
4004 tsti = tlp_srom_to_ifmedia(list[i]);
4005 tm = malloc(sizeof(*tm), M_DEVBUF, M_WAITOK|M_ZERO);
4006 tlp_srom_media_info(sc, tsti, tm);
4007 tm->tm_type = type;
4008 tm->tm_get = get;
4009 tm->tm_set = set;
4010
4011 ifmedia_add(&sc->sc_mii.mii_media,
4012 IFM_MAKEWORD(IFM_ETHER, tsti->tsti_subtype,
4013 tsti->tsti_options, sc->sc_tlp_minst), 0, tm);
4014 }
4015 }
4016
4017 static void
4018 tlp_print_media(struct tulip_softc *sc)
4019 {
4020 struct ifmedia_entry *ife;
4021 struct tulip_21x4x_media *tm;
4022 const char *sep = "";
4023
4024 #define PRINT(str) aprint_normal("%s%s", sep, str); sep = ", "
4025
4026 aprint_normal_dev(sc->sc_dev, "");
4027 TAILQ_FOREACH(ife, &sc->sc_mii.mii_media.ifm_list, ifm_list) {
4028 tm = ife->ifm_aux;
4029 if (tm == NULL) {
4030 #ifdef DIAGNOSTIC
4031 if (IFM_SUBTYPE(ife->ifm_media) != IFM_AUTO)
4032 panic("tlp_print_media");
4033 #endif
4034 PRINT("auto");
4035 } else if (tm->tm_type != TULIP_ROM_MB_21140_MII &&
4036 tm->tm_type != TULIP_ROM_MB_21142_MII) {
4037 PRINT(tm->tm_name);
4038 }
4039 }
4040 aprint_normal("\n");
4041
4042 #undef PRINT
4043 }
4044
4045 static void
4046 tlp_nway_activate(struct tulip_softc *sc, int media)
4047 {
4048 struct ifmedia_entry *ife;
4049
4050 ife = ifmedia_match(&sc->sc_mii.mii_media, media, 0);
4051 #ifdef DIAGNOSTIC
4052 if (ife == NULL)
4053 panic("tlp_nway_activate");
4054 #endif
4055 sc->sc_nway_active = ife;
4056 }
4057
4058 static void
4059 tlp_get_minst(struct tulip_softc *sc)
4060 {
4061
4062 if ((sc->sc_media_seen &
4063 ~((1 << TULIP_ROM_MB_21140_MII) |
4064 (1 << TULIP_ROM_MB_21142_MII))) == 0) {
4065 /*
4066 * We have not yet seen any SIA/SYM media (but are
4067 * about to; that's why we're called!), so assign
4068 * the current media instance to be the `internal media'
4069 * instance, and advance it so any MII media gets a
4070 * fresh one (used to selecting/isolating a PHY).
4071 */
4072 sc->sc_tlp_minst = sc->sc_mii.mii_instance++;
4073 }
4074 }
4075
4076 /*
4077 * SIA Utility functions.
4078 */
4079 static void tlp_sia_update_link(struct tulip_softc *);
4080 static void tlp_sia_get(struct tulip_softc *, struct ifmediareq *);
4081 static int tlp_sia_set(struct tulip_softc *);
4082 static int tlp_sia_media(struct tulip_softc *, struct ifmedia_entry *);
4083 static void tlp_sia_fixup(struct tulip_softc *);
4084
4085 static void
4086 tlp_sia_update_link(struct tulip_softc *sc)
4087 {
4088 struct ifmedia_entry *ife;
4089 struct tulip_21x4x_media *tm;
4090 uint32_t siastat;
4091
4092 ife = TULIP_CURRENT_MEDIA(sc);
4093 tm = ife->ifm_aux;
4094
4095 sc->sc_flags &= ~(TULIPF_LINK_UP|TULIPF_LINK_VALID);
4096
4097 siastat = TULIP_READ(sc, CSR_SIASTAT);
4098
4099 /*
4100 * Note that when we do SIA link tests, we are assuming that
4101 * the chip is really in the mode that the current media setting
4102 * reflects. If we're not, then the link tests will not be
4103 * accurate!
4104 */
4105 switch (IFM_SUBTYPE(ife->ifm_media)) {
4106 case IFM_10_T:
4107 sc->sc_flags |= TULIPF_LINK_VALID;
4108 if ((siastat & SIASTAT_LS10) == 0)
4109 sc->sc_flags |= TULIPF_LINK_UP;
4110 break;
4111
4112 case IFM_100_TX:
4113 case IFM_100_T4:
4114 sc->sc_flags |= TULIPF_LINK_VALID;
4115 if ((siastat & SIASTAT_LS100) == 0)
4116 sc->sc_flags |= TULIPF_LINK_UP;
4117 break;
4118 }
4119
4120 switch (sc->sc_chip) {
4121 case TULIP_CHIP_21142:
4122 case TULIP_CHIP_21143:
4123 /*
4124 * On these chips, we can tell more information about
4125 * AUI/BNC. Note that the AUI/BNC selection is made
4126 * in a different register; for our purpose, it's all
4127 * AUI.
4128 */
4129 switch (IFM_SUBTYPE(ife->ifm_media)) {
4130 case IFM_10_2:
4131 case IFM_10_5:
4132 sc->sc_flags |= TULIPF_LINK_VALID;
4133 if (siastat & SIASTAT_ARA) {
4134 TULIP_WRITE(sc, CSR_SIASTAT, SIASTAT_ARA);
4135 sc->sc_flags |= TULIPF_LINK_UP;
4136 }
4137 break;
4138
4139 default:
4140 /*
4141 * If we're SYM media and can detect the link
4142 * via the GPIO facility, prefer that status
4143 * over LS100.
4144 */
4145 if (tm->tm_type == TULIP_ROM_MB_21143_SYM &&
4146 tm->tm_actmask != 0) {
4147 sc->sc_flags = (sc->sc_flags &
4148 ~TULIPF_LINK_UP) | TULIPF_LINK_VALID;
4149 if (TULIP_ISSET(sc, CSR_SIAGEN,
4150 tm->tm_actmask) == tm->tm_actdata)
4151 sc->sc_flags |= TULIPF_LINK_UP;
4152 }
4153 }
4154 break;
4155
4156 default:
4157 /* Nothing. */
4158 break;
4159 }
4160 }
4161
4162 static void
4163 tlp_sia_get(struct tulip_softc *sc, struct ifmediareq *ifmr)
4164 {
4165 struct ifmedia_entry *ife;
4166
4167 ifmr->ifm_status = 0;
4168
4169 tlp_sia_update_link(sc);
4170
4171 ife = TULIP_CURRENT_MEDIA(sc);
4172
4173 if (sc->sc_flags & TULIPF_LINK_VALID)
4174 ifmr->ifm_status |= IFM_AVALID;
4175 if (sc->sc_flags & TULIPF_LINK_UP)
4176 ifmr->ifm_status |= IFM_ACTIVE;
4177 ifmr->ifm_active = ife->ifm_media;
4178 }
4179
4180 static void
4181 tlp_sia_fixup(struct tulip_softc *sc)
4182 {
4183 struct ifmedia_entry *ife;
4184 struct tulip_21x4x_media *tm;
4185 uint32_t siaconn, siatxrx, siagen;
4186
4187 switch (sc->sc_chip) {
4188 case TULIP_CHIP_82C115:
4189 case TULIP_CHIP_MX98713A:
4190 case TULIP_CHIP_MX98715:
4191 case TULIP_CHIP_MX98715A:
4192 case TULIP_CHIP_MX98715AEC_X:
4193 case TULIP_CHIP_MX98725:
4194 siaconn = PMAC_SIACONN_MASK;
4195 siatxrx = PMAC_SIATXRX_MASK;
4196 siagen = PMAC_SIAGEN_MASK;
4197 break;
4198
4199 default:
4200 /* No fixups required on any other chips. */
4201 return;
4202 }
4203
4204 TAILQ_FOREACH(ife, &sc->sc_mii.mii_media.ifm_list, ifm_list) {
4205 tm = ife->ifm_aux;
4206 if (tm == NULL)
4207 continue;
4208
4209 tm->tm_siaconn &= siaconn;
4210 tm->tm_siatxrx &= siatxrx;
4211 tm->tm_siagen &= siagen;
4212 }
4213 }
4214
4215 static int
4216 tlp_sia_set(struct tulip_softc *sc)
4217 {
4218
4219 return (tlp_sia_media(sc, TULIP_CURRENT_MEDIA(sc)));
4220 }
4221
4222 static int
4223 tlp_sia_media(struct tulip_softc *sc, struct ifmedia_entry *ife)
4224 {
4225 struct tulip_21x4x_media *tm;
4226
4227 tm = ife->ifm_aux;
4228
4229 /*
4230 * XXX This appears to be necessary on a bunch of the clone chips.
4231 */
4232 delay(20000);
4233
4234 /*
4235 * Idle the chip.
4236 */
4237 tlp_idle(sc, OPMODE_ST|OPMODE_SR);
4238
4239 /*
4240 * Program the SIA. It's important to write in this order,
4241 * resetting the SIA first.
4242 */
4243 TULIP_WRITE(sc, CSR_SIACONN, 0); /* SRL bit clear */
4244 delay(1000);
4245
4246 TULIP_WRITE(sc, CSR_SIATXRX, tm->tm_siatxrx);
4247
4248 switch (sc->sc_chip) {
4249 case TULIP_CHIP_21142:
4250 case TULIP_CHIP_21143:
4251 TULIP_WRITE(sc, CSR_SIAGEN, tm->tm_siagen | tm->tm_gpctl);
4252 TULIP_WRITE(sc, CSR_SIAGEN, tm->tm_siagen | tm->tm_gpdata);
4253 break;
4254 default:
4255 TULIP_WRITE(sc, CSR_SIAGEN, tm->tm_siagen);
4256 }
4257
4258 TULIP_WRITE(sc, CSR_SIACONN, tm->tm_siaconn);
4259
4260 /*
4261 * Set the OPMODE bits for this media and write OPMODE.
4262 * This will resume the transmit and receive processes.
4263 */
4264 sc->sc_opmode = (sc->sc_opmode & ~OPMODE_MEDIA_BITS) | tm->tm_opmode;
4265 TULIP_WRITE(sc, CSR_OPMODE, sc->sc_opmode);
4266
4267 return (0);
4268 }
4269
4270 /*
4271 * 21140 GPIO utility functions.
4272 */
4273 static void tlp_21140_gpio_update_link(struct tulip_softc *);
4274
4275 static void
4276 tlp_21140_gpio_update_link(struct tulip_softc *sc)
4277 {
4278 struct ifmedia_entry *ife;
4279 struct tulip_21x4x_media *tm;
4280
4281 ife = TULIP_CURRENT_MEDIA(sc);
4282 tm = ife->ifm_aux;
4283
4284 sc->sc_flags &= ~(TULIPF_LINK_UP|TULIPF_LINK_VALID);
4285
4286 if (tm->tm_actmask != 0) {
4287 sc->sc_flags |= TULIPF_LINK_VALID;
4288 if (TULIP_ISSET(sc, CSR_GPP, tm->tm_actmask) ==
4289 tm->tm_actdata)
4290 sc->sc_flags |= TULIPF_LINK_UP;
4291 }
4292 }
4293
4294 void
4295 tlp_21140_gpio_get(struct tulip_softc *sc, struct ifmediareq *ifmr)
4296 {
4297 struct ifmedia_entry *ife;
4298
4299 ifmr->ifm_status = 0;
4300
4301 tlp_21140_gpio_update_link(sc);
4302
4303 ife = TULIP_CURRENT_MEDIA(sc);
4304
4305 if (sc->sc_flags & TULIPF_LINK_VALID)
4306 ifmr->ifm_status |= IFM_AVALID;
4307 if (sc->sc_flags & TULIPF_LINK_UP)
4308 ifmr->ifm_status |= IFM_ACTIVE;
4309 ifmr->ifm_active = ife->ifm_media;
4310 }
4311
4312 int
4313 tlp_21140_gpio_set(struct tulip_softc *sc)
4314 {
4315 struct ifmedia_entry *ife;
4316 struct tulip_21x4x_media *tm;
4317
4318 ife = TULIP_CURRENT_MEDIA(sc);
4319 tm = ife->ifm_aux;
4320
4321 /*
4322 * Idle the chip.
4323 */
4324 tlp_idle(sc, OPMODE_ST|OPMODE_SR);
4325
4326 /*
4327 * Set the GPIO pins for this media, to flip any
4328 * relays, etc.
4329 */
4330 TULIP_WRITE(sc, CSR_GPP, GPP_GPC|sc->sc_gp_dir);
4331 delay(10);
4332 TULIP_WRITE(sc, CSR_GPP, tm->tm_gpdata);
4333
4334 /*
4335 * Set the OPMODE bits for this media and write OPMODE.
4336 * This will resume the transmit and receive processes.
4337 */
4338 sc->sc_opmode = (sc->sc_opmode & ~OPMODE_MEDIA_BITS) | tm->tm_opmode;
4339 TULIP_WRITE(sc, CSR_OPMODE, sc->sc_opmode);
4340
4341 return (0);
4342 }
4343
4344 /*
4345 * 21040 and 21041 media switches.
4346 */
4347 static void tlp_21040_tmsw_init(struct tulip_softc *);
4348 static void tlp_21040_tp_tmsw_init(struct tulip_softc *);
4349 static void tlp_21040_auibnc_tmsw_init(struct tulip_softc *);
4350 static void tlp_21041_tmsw_init(struct tulip_softc *);
4351
4352 const struct tulip_mediasw tlp_21040_mediasw = {
4353 tlp_21040_tmsw_init, tlp_sia_get, tlp_sia_set
4354 };
4355
4356 const struct tulip_mediasw tlp_21040_tp_mediasw = {
4357 tlp_21040_tp_tmsw_init, tlp_sia_get, tlp_sia_set
4358 };
4359
4360 const struct tulip_mediasw tlp_21040_auibnc_mediasw = {
4361 tlp_21040_auibnc_tmsw_init, tlp_sia_get, tlp_sia_set
4362 };
4363
4364 const struct tulip_mediasw tlp_21041_mediasw = {
4365 tlp_21041_tmsw_init, tlp_sia_get, tlp_sia_set
4366 };
4367
4368 static void
4369 tlp_21040_tmsw_init(struct tulip_softc *sc)
4370 {
4371 static const uint8_t media[] = {
4372 TULIP_ROM_MB_MEDIA_TP,
4373 TULIP_ROM_MB_MEDIA_TP_FDX,
4374 TULIP_ROM_MB_MEDIA_AUI,
4375 };
4376 struct tulip_21x4x_media *tm;
4377
4378 ifmedia_init(&sc->sc_mii.mii_media, 0, tlp_mediachange,
4379 tlp_mediastatus);
4380
4381 tlp_add_srom_media(sc, 0, NULL, NULL, media, 3);
4382
4383 /*
4384 * No SROM type for External SIA.
4385 */
4386 tm = malloc(sizeof(*tm), M_DEVBUF, M_WAITOK|M_ZERO);
4387 tm->tm_name = "manual";
4388 tm->tm_opmode = 0;
4389 tm->tm_siaconn = SIACONN_21040_EXTSIA;
4390 tm->tm_siatxrx = SIATXRX_21040_EXTSIA;
4391 tm->tm_siagen = SIAGEN_21040_EXTSIA;
4392 ifmedia_add(&sc->sc_mii.mii_media,
4393 IFM_MAKEWORD(IFM_ETHER, IFM_MANUAL, 0, sc->sc_tlp_minst), 0, tm);
4394
4395 /*
4396 * XXX Autosense not yet supported.
4397 */
4398
4399 /* XXX This should be auto-sense. */
4400 ifmedia_set(&sc->sc_mii.mii_media, IFM_ETHER|IFM_10_T);
4401
4402 tlp_print_media(sc);
4403 }
4404
4405 static void
4406 tlp_21040_tp_tmsw_init(struct tulip_softc *sc)
4407 {
4408 static const uint8_t media[] = {
4409 TULIP_ROM_MB_MEDIA_TP,
4410 TULIP_ROM_MB_MEDIA_TP_FDX,
4411 };
4412
4413 ifmedia_init(&sc->sc_mii.mii_media, 0, tlp_mediachange,
4414 tlp_mediastatus);
4415
4416 tlp_add_srom_media(sc, 0, NULL, NULL, media, 2);
4417
4418 ifmedia_set(&sc->sc_mii.mii_media, IFM_ETHER|IFM_10_T);
4419
4420 tlp_print_media(sc);
4421 }
4422
4423 static void
4424 tlp_21040_auibnc_tmsw_init(struct tulip_softc *sc)
4425 {
4426 static const uint8_t media[] = {
4427 TULIP_ROM_MB_MEDIA_AUI,
4428 };
4429
4430 ifmedia_init(&sc->sc_mii.mii_media, 0, tlp_mediachange,
4431 tlp_mediastatus);
4432
4433 tlp_add_srom_media(sc, 0, NULL, NULL, media, 1);
4434
4435 ifmedia_set(&sc->sc_mii.mii_media, IFM_ETHER|IFM_10_5);
4436
4437 tlp_print_media(sc);
4438 }
4439
4440 static void
4441 tlp_21041_tmsw_init(struct tulip_softc *sc)
4442 {
4443 static const uint8_t media[] = {
4444 TULIP_ROM_MB_MEDIA_TP,
4445 TULIP_ROM_MB_MEDIA_TP_FDX,
4446 TULIP_ROM_MB_MEDIA_BNC,
4447 TULIP_ROM_MB_MEDIA_AUI,
4448 };
4449 int i, defmedia, devcnt, leaf_offset, mb_offset, m_cnt;
4450 const struct tulip_srom_to_ifmedia *tsti;
4451 struct tulip_21x4x_media *tm;
4452 uint16_t romdef;
4453 uint8_t mb;
4454
4455 ifmedia_init(&sc->sc_mii.mii_media, 0, tlp_mediachange,
4456 tlp_mediastatus);
4457
4458 if (tlp_isv_srom(sc->sc_srom) == 0) {
4459 not_isv_srom:
4460 /*
4461 * If we have a board without the standard 21041 SROM format,
4462 * we just assume all media are present and try and pick a
4463 * reasonable default.
4464 */
4465 tlp_add_srom_media(sc, 0, NULL, NULL, media, 4);
4466
4467 /*
4468 * XXX Autosense not yet supported.
4469 */
4470
4471 /* XXX This should be auto-sense. */
4472 ifmedia_set(&sc->sc_mii.mii_media, IFM_ETHER|IFM_10_T);
4473
4474 tlp_print_media(sc);
4475 return;
4476 }
4477
4478 devcnt = sc->sc_srom[TULIP_ROM_CHIP_COUNT];
4479 for (i = 0; i < devcnt; i++) {
4480 if (sc->sc_srom[TULIP_ROM_CHIP_COUNT] == 1)
4481 break;
4482 if (sc->sc_srom[TULIP_ROM_CHIPn_DEVICE_NUMBER(i)] ==
4483 sc->sc_devno)
4484 break;
4485 }
4486
4487 if (i == devcnt)
4488 goto not_isv_srom;
4489
4490 leaf_offset = TULIP_ROM_GETW(sc->sc_srom,
4491 TULIP_ROM_CHIPn_INFO_LEAF_OFFSET(i));
4492 mb_offset = leaf_offset + TULIP_ROM_IL_MEDIAn_BLOCK_BASE;
4493 m_cnt = sc->sc_srom[leaf_offset + TULIP_ROM_IL_MEDIA_COUNT];
4494
4495 for (; m_cnt != 0;
4496 m_cnt--, mb_offset += TULIP_ROM_MB_SIZE(mb)) {
4497 mb = sc->sc_srom[mb_offset];
4498 tm = malloc(sizeof(*tm), M_DEVBUF, M_WAITOK|M_ZERO);
4499 switch (mb & TULIP_ROM_MB_MEDIA_CODE) {
4500 case TULIP_ROM_MB_MEDIA_TP_FDX:
4501 case TULIP_ROM_MB_MEDIA_TP:
4502 case TULIP_ROM_MB_MEDIA_BNC:
4503 case TULIP_ROM_MB_MEDIA_AUI:
4504 tsti = tlp_srom_to_ifmedia(mb &
4505 TULIP_ROM_MB_MEDIA_CODE);
4506
4507 tlp_srom_media_info(sc, tsti, tm);
4508
4509 /*
4510 * Override our default SIA settings if the
4511 * SROM contains its own.
4512 */
4513 if (mb & TULIP_ROM_MB_EXT) {
4514 tm->tm_siaconn = TULIP_ROM_GETW(sc->sc_srom,
4515 mb_offset + TULIP_ROM_MB_CSR13);
4516 tm->tm_siatxrx = TULIP_ROM_GETW(sc->sc_srom,
4517 mb_offset + TULIP_ROM_MB_CSR14);
4518 tm->tm_siagen = TULIP_ROM_GETW(sc->sc_srom,
4519 mb_offset + TULIP_ROM_MB_CSR15);
4520 }
4521
4522 ifmedia_add(&sc->sc_mii.mii_media,
4523 IFM_MAKEWORD(IFM_ETHER, tsti->tsti_subtype,
4524 tsti->tsti_options, sc->sc_tlp_minst), 0, tm);
4525 break;
4526
4527 default:
4528 aprint_error_dev(sc->sc_dev,
4529 "unknown media code 0x%02x\n",
4530 mb & TULIP_ROM_MB_MEDIA_CODE);
4531 free(tm, M_DEVBUF);
4532 }
4533 }
4534
4535 /*
4536 * XXX Autosense not yet supported.
4537 */
4538
4539 romdef = TULIP_ROM_GETW(sc->sc_srom, leaf_offset +
4540 TULIP_ROM_IL_SELECT_CONN_TYPE);
4541 switch (romdef) {
4542 case SELECT_CONN_TYPE_TP:
4543 case SELECT_CONN_TYPE_TP_AUTONEG:
4544 case SELECT_CONN_TYPE_TP_NOLINKPASS:
4545 defmedia = IFM_ETHER|IFM_10_T;
4546 break;
4547
4548 case SELECT_CONN_TYPE_TP_FDX:
4549 defmedia = IFM_ETHER|IFM_10_T|IFM_FDX;
4550 break;
4551
4552 case SELECT_CONN_TYPE_BNC:
4553 defmedia = IFM_ETHER|IFM_10_2;
4554 break;
4555
4556 case SELECT_CONN_TYPE_AUI:
4557 defmedia = IFM_ETHER|IFM_10_5;
4558 break;
4559 #if 0 /* XXX */
4560 case SELECT_CONN_TYPE_ASENSE:
4561 case SELECT_CONN_TYPE_ASENSE_AUTONEG:
4562 defmedia = IFM_ETHER|IFM_AUTO;
4563 break;
4564 #endif
4565 default:
4566 defmedia = 0;
4567 }
4568
4569 if (defmedia == 0) {
4570 /*
4571 * XXX We should default to auto-sense.
4572 */
4573 defmedia = IFM_ETHER|IFM_10_T;
4574 }
4575
4576 ifmedia_set(&sc->sc_mii.mii_media, defmedia);
4577
4578 tlp_print_media(sc);
4579 }
4580
4581 /*
4582 * DECchip 2114x ISV media switch.
4583 */
4584 static void tlp_2114x_isv_tmsw_init(struct tulip_softc *);
4585 static void tlp_2114x_isv_tmsw_get(struct tulip_softc *,
4586 struct ifmediareq *);
4587 static int tlp_2114x_isv_tmsw_set(struct tulip_softc *);
4588
4589 const struct tulip_mediasw tlp_2114x_isv_mediasw = {
4590 tlp_2114x_isv_tmsw_init, tlp_2114x_isv_tmsw_get, tlp_2114x_isv_tmsw_set
4591 };
4592
4593 static void tlp_2114x_nway_get(struct tulip_softc *, struct ifmediareq *);
4594 static int tlp_2114x_nway_set(struct tulip_softc *);
4595
4596 static void tlp_2114x_nway_statchg(device_t);
4597 static int tlp_2114x_nway_service(struct tulip_softc *, int);
4598 static void tlp_2114x_nway_auto(struct tulip_softc *);
4599 static void tlp_2114x_nway_status(struct tulip_softc *);
4600
4601 static void
4602 tlp_2114x_isv_tmsw_init(struct tulip_softc *sc)
4603 {
4604 struct ifnet *ifp = &sc->sc_ethercom.ec_if;
4605 struct ifmedia_entry *ife;
4606 struct mii_softc *phy;
4607 struct tulip_21x4x_media *tm;
4608 const struct tulip_srom_to_ifmedia *tsti;
4609 int i, devcnt, leaf_offset, m_cnt, type, length;
4610 int defmedia, miidef;
4611 uint16_t word;
4612 uint8_t *cp, *ncp;
4613
4614 defmedia = miidef = 0;
4615
4616 sc->sc_mii.mii_ifp = ifp;
4617 sc->sc_mii.mii_readreg = tlp_bitbang_mii_readreg;
4618 sc->sc_mii.mii_writereg = tlp_bitbang_mii_writereg;
4619 sc->sc_mii.mii_statchg = sc->sc_statchg;
4620
4621 /*
4622 * Ignore `instance'; we may get a mixture of SIA and MII
4623 * media, and `instance' is used to isolate or select the
4624 * PHY on the MII as appropriate. Note that duplicate media
4625 * are disallowed, so ignoring `instance' is safe.
4626 */
4627 ifmedia_init(&sc->sc_mii.mii_media, IFM_IMASK, tlp_mediachange,
4628 tlp_mediastatus);
4629
4630 devcnt = sc->sc_srom[TULIP_ROM_CHIP_COUNT];
4631 for (i = 0; i < devcnt; i++) {
4632 if (sc->sc_srom[TULIP_ROM_CHIP_COUNT] == 1)
4633 break;
4634 if (sc->sc_srom[TULIP_ROM_CHIPn_DEVICE_NUMBER(i)] ==
4635 sc->sc_devno)
4636 break;
4637 }
4638
4639 if (i == devcnt) {
4640 aprint_error_dev(sc->sc_dev, "unable to locate info leaf in SROM\n");
4641 return;
4642 }
4643
4644 leaf_offset = TULIP_ROM_GETW(sc->sc_srom,
4645 TULIP_ROM_CHIPn_INFO_LEAF_OFFSET(i));
4646
4647 /* XXX SELECT CONN TYPE */
4648
4649 cp = &sc->sc_srom[leaf_offset + TULIP_ROM_IL_MEDIA_COUNT];
4650
4651 /*
4652 * On some chips, the first thing in the Info Leaf is the
4653 * GPIO pin direction data.
4654 */
4655 switch (sc->sc_chip) {
4656 case TULIP_CHIP_21140:
4657 case TULIP_CHIP_21140A:
4658 case TULIP_CHIP_MX98713:
4659 case TULIP_CHIP_AX88140:
4660 case TULIP_CHIP_AX88141:
4661 sc->sc_gp_dir = *cp++;
4662 break;
4663
4664 default:
4665 /* Nothing. */
4666 break;
4667 }
4668
4669 /* Get the media count. */
4670 m_cnt = *cp++;
4671
4672 if (m_cnt == 0) {
4673 sc->sc_mediasw = &tlp_sio_mii_mediasw;
4674 (*sc->sc_mediasw->tmsw_init)(sc);
4675 return;
4676 }
4677
4678 for (; m_cnt != 0; cp = ncp, m_cnt--) {
4679 /*
4680 * Determine the type and length of this media block.
4681 * The 21143 is spec'd to always use extended format blocks,
4682 * but some cards don't set the bit to indicate this.
4683 * Hopefully there are no cards which really don't use
4684 * extended format blocks.
4685 */
4686 if ((*cp & 0x80) == 0 && sc->sc_chip != TULIP_CHIP_21143) {
4687 length = 4;
4688 type = TULIP_ROM_MB_21140_GPR;
4689 } else {
4690 length = (*cp++ & 0x7f) - 1;
4691 type = *cp++ & 0x3f;
4692 }
4693
4694 /* Compute the start of the next block. */
4695 ncp = cp + length;
4696
4697 /* Now, parse the block. */
4698 switch (type) {
4699 case TULIP_ROM_MB_21140_GPR:
4700 tlp_get_minst(sc);
4701 sc->sc_media_seen |= 1 << TULIP_ROM_MB_21140_GPR;
4702
4703 tm = malloc(sizeof(*tm), M_DEVBUF, M_WAITOK|M_ZERO);
4704
4705 tm->tm_type = TULIP_ROM_MB_21140_GPR;
4706 tm->tm_get = tlp_21140_gpio_get;
4707 tm->tm_set = tlp_21140_gpio_set;
4708
4709 /* First is the media type code. */
4710 tsti = tlp_srom_to_ifmedia(cp[0] &
4711 TULIP_ROM_MB_MEDIA_CODE);
4712 if (tsti == NULL) {
4713 /* Invalid media code. */
4714 free(tm, M_DEVBUF);
4715 break;
4716 }
4717
4718 /* Get defaults. */
4719 tlp_srom_media_info(sc, tsti, tm);
4720
4721 /* Next is any GPIO info for this media. */
4722 tm->tm_gpdata = cp[1];
4723
4724 /*
4725 * Next is a word containing OPMODE information
4726 * and info on how to detect if this media is
4727 * active.
4728 */
4729 word = TULIP_ROM_GETW(cp, 2);
4730 tm->tm_opmode &= OPMODE_FD;
4731 tm->tm_opmode |= TULIP_ROM_MB_OPMODE(word);
4732 if ((word & TULIP_ROM_MB_NOINDICATOR) == 0) {
4733 tm->tm_actmask =
4734 TULIP_ROM_MB_BITPOS(word);
4735 tm->tm_actdata =
4736 (word & TULIP_ROM_MB_POLARITY) ?
4737 0 : tm->tm_actmask;
4738 }
4739
4740 ifmedia_add(&sc->sc_mii.mii_media,
4741 IFM_MAKEWORD(IFM_ETHER, tsti->tsti_subtype,
4742 tsti->tsti_options, sc->sc_tlp_minst), 0, tm);
4743 break;
4744
4745 case TULIP_ROM_MB_21140_MII:
4746 sc->sc_media_seen |= 1 << TULIP_ROM_MB_21140_MII;
4747
4748 tm = malloc(sizeof(*tm), M_DEVBUF, M_WAITOK|M_ZERO);
4749
4750 tm->tm_type = TULIP_ROM_MB_21140_MII;
4751 tm->tm_get = tlp_mii_getmedia;
4752 tm->tm_set = tlp_mii_setmedia;
4753 tm->tm_opmode = OPMODE_PS;
4754
4755 if (sc->sc_reset == NULL)
4756 sc->sc_reset = tlp_21140_reset;
4757
4758 /* First is the PHY number. */
4759 tm->tm_phyno = *cp++;
4760
4761 /* Next is the MII select sequence length and offset. */
4762 tm->tm_gp_length = *cp++;
4763 tm->tm_gp_offset = cp - &sc->sc_srom[0];
4764 cp += tm->tm_gp_length;
4765
4766 /* Next is the MII reset sequence length and offset. */
4767 tm->tm_reset_length = *cp++;
4768 tm->tm_reset_offset = cp - &sc->sc_srom[0];
4769 cp += tm->tm_reset_length;
4770
4771 /*
4772 * The following items are left in the media block
4773 * that we don't particularly care about:
4774 *
4775 * capabilities W
4776 * advertisement W
4777 * full duplex W
4778 * tx threshold W
4779 *
4780 * These appear to be bits in the PHY registers,
4781 * which our MII code handles on its own.
4782 */
4783
4784 /*
4785 * Before we probe the MII bus, we need to reset
4786 * it and issue the selection sequence.
4787 */
4788
4789 /* Set the direction of the pins... */
4790 TULIP_WRITE(sc, CSR_GPP, GPP_GPC|sc->sc_gp_dir);
4791
4792 for (i = 0; i < tm->tm_reset_length; i++) {
4793 delay(10);
4794 TULIP_WRITE(sc, CSR_GPP,
4795 sc->sc_srom[tm->tm_reset_offset + i]);
4796 }
4797
4798 for (i = 0; i < tm->tm_gp_length; i++) {
4799 delay(10);
4800 TULIP_WRITE(sc, CSR_GPP,
4801 sc->sc_srom[tm->tm_gp_offset + i]);
4802 }
4803
4804 /* If there were no sequences, just lower the pins. */
4805 if (tm->tm_reset_length == 0 && tm->tm_gp_length == 0) {
4806 delay(10);
4807 TULIP_WRITE(sc, CSR_GPP, 0);
4808 }
4809
4810 /*
4811 * Now, probe the MII for the PHY. Note, we know
4812 * the location of the PHY on the bus, but we don't
4813 * particularly care; the MII code just likes to
4814 * search the whole thing anyhow.
4815 */
4816 mii_attach(sc->sc_dev, &sc->sc_mii, 0xffffffff,
4817 MII_PHY_ANY, tm->tm_phyno, 0);
4818
4819 /*
4820 * Now, search for the PHY we hopefully just
4821 * configured. If it's not configured into the
4822 * kernel, we lose. The PHY's default media always
4823 * takes priority.
4824 */
4825 LIST_FOREACH(phy, &sc->sc_mii.mii_phys, mii_list) {
4826 if (phy->mii_offset == tm->tm_phyno)
4827 break;
4828 }
4829 if (phy == NULL) {
4830 aprint_error_dev(sc->sc_dev, "unable to configure MII\n");
4831 break;
4832 }
4833
4834 sc->sc_flags |= TULIPF_HAS_MII;
4835 sc->sc_tick = tlp_mii_tick;
4836 miidef = IFM_MAKEWORD(IFM_ETHER, IFM_AUTO, 0,
4837 phy->mii_inst);
4838
4839 /*
4840 * Okay, now that we've found the PHY and the MII
4841 * layer has added all of the media associated
4842 * with that PHY, we need to traverse the media
4843 * list, and add our `tm' to each entry's `aux'
4844 * pointer.
4845 *
4846 * We do this by looking for media with our
4847 * PHY's `instance'.
4848 */
4849 TAILQ_FOREACH(ife, &sc->sc_mii.mii_media.ifm_list,
4850 ifm_list) {
4851 if (IFM_INST(ife->ifm_media) != phy->mii_inst)
4852 continue;
4853 ife->ifm_aux = tm;
4854 }
4855 break;
4856
4857 case TULIP_ROM_MB_21142_SIA:
4858 tlp_get_minst(sc);
4859 sc->sc_media_seen |= 1 << TULIP_ROM_MB_21142_SIA;
4860
4861 tm = malloc(sizeof(*tm), M_DEVBUF, M_WAITOK|M_ZERO);
4862
4863 tm->tm_type = TULIP_ROM_MB_21142_SIA;
4864 tm->tm_get = tlp_sia_get;
4865 tm->tm_set = tlp_sia_set;
4866
4867 /* First is the media type code. */
4868 tsti = tlp_srom_to_ifmedia(cp[0] &
4869 TULIP_ROM_MB_MEDIA_CODE);
4870 if (tsti == NULL) {
4871 /* Invalid media code. */
4872 free(tm, M_DEVBUF);
4873 break;
4874 }
4875
4876 /* Get defaults. */
4877 tlp_srom_media_info(sc, tsti, tm);
4878
4879 /*
4880 * Override our default SIA settings if the
4881 * SROM contains its own.
4882 */
4883 if (cp[0] & 0x40) {
4884 tm->tm_siaconn = TULIP_ROM_GETW(cp, 1);
4885 tm->tm_siatxrx = TULIP_ROM_GETW(cp, 3);
4886 tm->tm_siagen = TULIP_ROM_GETW(cp, 5);
4887 cp += 7;
4888 } else
4889 cp++;
4890
4891 /* Next is GPIO control/data. */
4892 tm->tm_gpctl = TULIP_ROM_GETW(cp, 0) << 16;
4893 tm->tm_gpdata = TULIP_ROM_GETW(cp, 2) << 16;
4894
4895 ifmedia_add(&sc->sc_mii.mii_media,
4896 IFM_MAKEWORD(IFM_ETHER, tsti->tsti_subtype,
4897 tsti->tsti_options, sc->sc_tlp_minst), 0, tm);
4898 break;
4899
4900 case TULIP_ROM_MB_21142_MII:
4901 sc->sc_media_seen |= 1 << TULIP_ROM_MB_21142_MII;
4902
4903 tm = malloc(sizeof(*tm), M_DEVBUF, M_WAITOK|M_ZERO);
4904
4905 tm->tm_type = TULIP_ROM_MB_21142_MII;
4906 tm->tm_get = tlp_mii_getmedia;
4907 tm->tm_set = tlp_mii_setmedia;
4908 tm->tm_opmode = OPMODE_PS;
4909
4910 if (sc->sc_reset == NULL)
4911 sc->sc_reset = tlp_21142_reset;
4912
4913 /* First is the PHY number. */
4914 tm->tm_phyno = *cp++;
4915
4916 /* Next is the MII select sequence length and offset. */
4917 tm->tm_gp_length = *cp++;
4918 tm->tm_gp_offset = cp - &sc->sc_srom[0];
4919 cp += tm->tm_gp_length * 2;
4920
4921 /* Next is the MII reset sequence length and offset. */
4922 tm->tm_reset_length = *cp++;
4923 tm->tm_reset_offset = cp - &sc->sc_srom[0];
4924 cp += tm->tm_reset_length * 2;
4925
4926 /*
4927 * The following items are left in the media block
4928 * that we don't particularly care about:
4929 *
4930 * capabilities W
4931 * advertisement W
4932 * full duplex W
4933 * tx threshold W
4934 * MII interrupt W
4935 *
4936 * These appear to be bits in the PHY registers,
4937 * which our MII code handles on its own.
4938 */
4939
4940 /*
4941 * Before we probe the MII bus, we need to reset
4942 * it and issue the selection sequence.
4943 */
4944
4945 cp = &sc->sc_srom[tm->tm_reset_offset];
4946 for (i = 0; i < tm->tm_reset_length; i++, cp += 2) {
4947 delay(10);
4948 TULIP_WRITE(sc, CSR_SIAGEN,
4949 TULIP_ROM_GETW(cp, 0) << 16);
4950 }
4951
4952 cp = &sc->sc_srom[tm->tm_gp_offset];
4953 for (i = 0; i < tm->tm_gp_length; i++, cp += 2) {
4954 delay(10);
4955 TULIP_WRITE(sc, CSR_SIAGEN,
4956 TULIP_ROM_GETW(cp, 0) << 16);
4957 }
4958
4959 /* If there were no sequences, just lower the pins. */
4960 if (tm->tm_reset_length == 0 && tm->tm_gp_length == 0) {
4961 delay(10);
4962 TULIP_WRITE(sc, CSR_SIAGEN, 0);
4963 }
4964
4965 /*
4966 * Now, probe the MII for the PHY. Note, we know
4967 * the location of the PHY on the bus, but we don't
4968 * particularly care; the MII code just likes to
4969 * search the whole thing anyhow.
4970 */
4971 mii_attach(sc->sc_dev, &sc->sc_mii, 0xffffffff,
4972 MII_PHY_ANY, tm->tm_phyno, 0);
4973
4974 /*
4975 * Now, search for the PHY we hopefully just
4976 * configured. If it's not configured into the
4977 * kernel, we lose. The PHY's default media always
4978 * takes priority.
4979 */
4980 LIST_FOREACH(phy, &sc->sc_mii.mii_phys, mii_list) {
4981 if (phy->mii_offset == tm->tm_phyno)
4982 break;
4983 }
4984 if (phy == NULL) {
4985 aprint_error_dev(sc->sc_dev, "unable to configure MII\n");
4986 break;
4987 }
4988
4989 sc->sc_flags |= TULIPF_HAS_MII;
4990 sc->sc_tick = tlp_mii_tick;
4991 miidef = IFM_MAKEWORD(IFM_ETHER, IFM_AUTO, 0,
4992 phy->mii_inst);
4993
4994 /*
4995 * Okay, now that we've found the PHY and the MII
4996 * layer has added all of the media associated
4997 * with that PHY, we need to traverse the media
4998 * list, and add our `tm' to each entry's `aux'
4999 * pointer.
5000 *
5001 * We do this by looking for media with our
5002 * PHY's `instance'.
5003 */
5004 TAILQ_FOREACH(ife, &sc->sc_mii.mii_media.ifm_list,
5005 ifm_list) {
5006 if (IFM_INST(ife->ifm_media) != phy->mii_inst)
5007 continue;
5008 ife->ifm_aux = tm;
5009 }
5010 break;
5011
5012 case TULIP_ROM_MB_21143_SYM:
5013 tlp_get_minst(sc);
5014 sc->sc_media_seen |= 1 << TULIP_ROM_MB_21143_SYM;
5015
5016 tm = malloc(sizeof(*tm), M_DEVBUF, M_WAITOK|M_ZERO);
5017
5018 tm->tm_type = TULIP_ROM_MB_21143_SYM;
5019 tm->tm_get = tlp_sia_get;
5020 tm->tm_set = tlp_sia_set;
5021
5022 /* First is the media type code. */
5023 tsti = tlp_srom_to_ifmedia(cp[0] &
5024 TULIP_ROM_MB_MEDIA_CODE);
5025 if (tsti == NULL) {
5026 /* Invalid media code. */
5027 free(tm, M_DEVBUF);
5028 break;
5029 }
5030
5031 /* Get defaults. */
5032 tlp_srom_media_info(sc, tsti, tm);
5033
5034 /* Next is GPIO control/data. */
5035 tm->tm_gpctl = TULIP_ROM_GETW(cp, 1) << 16;
5036 tm->tm_gpdata = TULIP_ROM_GETW(cp, 3) << 16;
5037
5038 /*
5039 * Next is a word containing OPMODE information
5040 * and info on how to detect if this media is
5041 * active.
5042 */
5043 word = TULIP_ROM_GETW(cp, 5);
5044 tm->tm_opmode &= OPMODE_FD;
5045 tm->tm_opmode |= TULIP_ROM_MB_OPMODE(word);
5046 if ((word & TULIP_ROM_MB_NOINDICATOR) == 0) {
5047 tm->tm_actmask =
5048 TULIP_ROM_MB_BITPOS(word);
5049 tm->tm_actdata =
5050 (word & TULIP_ROM_MB_POLARITY) ?
5051 0 : tm->tm_actmask;
5052 }
5053
5054 ifmedia_add(&sc->sc_mii.mii_media,
5055 IFM_MAKEWORD(IFM_ETHER, tsti->tsti_subtype,
5056 tsti->tsti_options, sc->sc_tlp_minst), 0, tm);
5057 break;
5058
5059 case TULIP_ROM_MB_21143_RESET:
5060 aprint_normal_dev(sc->sc_dev, "21143 reset block\n");
5061 break;
5062
5063 default:
5064 aprint_error_dev(sc->sc_dev,
5065 "unknown ISV media block type 0x%02x\n", type);
5066 }
5067 }
5068
5069 /*
5070 * Deal with the case where no media is configured.
5071 */
5072 if (TAILQ_FIRST(&sc->sc_mii.mii_media.ifm_list) == NULL) {
5073 aprint_error_dev(sc->sc_dev, "no media found!\n");
5074 ifmedia_add(&sc->sc_mii.mii_media, IFM_ETHER|IFM_NONE, 0, NULL);
5075 ifmedia_set(&sc->sc_mii.mii_media, IFM_ETHER|IFM_NONE);
5076 return;
5077 }
5078
5079 /*
5080 * Pick the default media.
5081 */
5082 if (miidef != 0)
5083 defmedia = miidef;
5084 else {
5085 switch (sc->sc_chip) {
5086 case TULIP_CHIP_21140:
5087 case TULIP_CHIP_21140A:
5088 /* XXX should come from SROM */
5089 defmedia = IFM_MAKEWORD(IFM_ETHER, IFM_10_T, 0, 0);
5090 if (ifmedia_match(&sc->sc_mii.mii_media, defmedia,
5091 sc->sc_mii.mii_media.ifm_mask) == NULL) {
5092 /*
5093 * There is not a 10baseT media.
5094 * Fall back to the first found one.
5095 */
5096 ife = TAILQ_FIRST(&sc->sc_mii.mii_media.ifm_list);
5097 defmedia = ife->ifm_media;
5098 }
5099 break;
5100
5101 case TULIP_CHIP_21142:
5102 case TULIP_CHIP_21143:
5103 case TULIP_CHIP_MX98713A:
5104 case TULIP_CHIP_MX98715:
5105 case TULIP_CHIP_MX98715A:
5106 case TULIP_CHIP_MX98715AEC_X:
5107 case TULIP_CHIP_MX98725:
5108 tm = malloc(sizeof(*tm), M_DEVBUF, M_WAITOK|M_ZERO);
5109 tm->tm_name = "auto";
5110 tm->tm_get = tlp_2114x_nway_get;
5111 tm->tm_set = tlp_2114x_nway_set;
5112
5113 defmedia = IFM_MAKEWORD(IFM_ETHER, IFM_AUTO, 0, 0);
5114 ifmedia_add(&sc->sc_mii.mii_media, defmedia, 0, tm);
5115
5116 sc->sc_statchg = tlp_2114x_nway_statchg;
5117 sc->sc_tick = tlp_2114x_nway_tick;
5118 break;
5119
5120 default:
5121 defmedia = IFM_MAKEWORD(IFM_ETHER, IFM_10_T, 0, 0);
5122 break;
5123 }
5124 }
5125
5126 ifmedia_set(&sc->sc_mii.mii_media, defmedia);
5127
5128 /*
5129 * Display any non-MII media we've located.
5130 */
5131 if (sc->sc_media_seen &
5132 ~((1 << TULIP_ROM_MB_21140_MII) | (1 << TULIP_ROM_MB_21142_MII)))
5133 tlp_print_media(sc);
5134
5135 tlp_sia_fixup(sc);
5136 }
5137
5138 static void
5139 tlp_2114x_nway_get(struct tulip_softc *sc, struct ifmediareq *ifmr)
5140 {
5141
5142 (void) tlp_2114x_nway_service(sc, MII_POLLSTAT);
5143 ifmr->ifm_status = sc->sc_mii.mii_media_status;
5144 ifmr->ifm_active = sc->sc_mii.mii_media_active;
5145 }
5146
5147 static int
5148 tlp_2114x_nway_set(struct tulip_softc *sc)
5149 {
5150
5151 return (tlp_2114x_nway_service(sc, MII_MEDIACHG));
5152 }
5153
5154 static void
5155 tlp_2114x_nway_statchg(device_t self)
5156 {
5157 struct tulip_softc *sc = device_private(self);
5158 struct mii_data *mii = &sc->sc_mii;
5159 struct ifmedia_entry *ife;
5160
5161 if (IFM_SUBTYPE(mii->mii_media_active) == IFM_NONE)
5162 return;
5163
5164 if ((ife = ifmedia_match(&mii->mii_media, mii->mii_media_active,
5165 mii->mii_media.ifm_mask)) == NULL) {
5166 printf("tlp_2114x_nway_statchg: no match for media 0x%x/0x%x\n",
5167 mii->mii_media_active, ~mii->mii_media.ifm_mask);
5168 panic("tlp_2114x_nway_statchg");
5169 }
5170
5171 tlp_sia_media(sc, ife);
5172 }
5173
5174 static void
5175 tlp_2114x_nway_tick(void *arg)
5176 {
5177 struct tulip_softc *sc = arg;
5178 struct mii_data *mii = &sc->sc_mii;
5179 int s, ticks;
5180
5181 if (!device_is_active(sc->sc_dev))
5182 return;
5183
5184 s = splnet();
5185 tlp_2114x_nway_service(sc, MII_TICK);
5186 if ((sc->sc_flags & TULIPF_LINK_UP) == 0 &&
5187 (mii->mii_media_status & IFM_ACTIVE) != 0 &&
5188 IFM_SUBTYPE(mii->mii_media_active) != IFM_NONE) {
5189 sc->sc_flags |= TULIPF_LINK_UP;
5190 tlp_start(&sc->sc_ethercom.ec_if);
5191 } else if ((sc->sc_flags & TULIPF_LINK_UP) != 0 &&
5192 (mii->mii_media_status & IFM_ACTIVE) == 0) {
5193 sc->sc_flags &= ~TULIPF_LINK_UP;
5194 }
5195 splx(s);
5196
5197 if ((sc->sc_flags & TULIPF_LINK_UP) == 0)
5198 ticks = hz >> 3;
5199 else
5200 ticks = hz;
5201 callout_reset(&sc->sc_tick_callout, ticks, tlp_2114x_nway_tick, sc);
5202 }
5203
5204 /*
5205 * Support for the 2114X internal NWay block. This is constructed
5206 * somewhat like a PHY driver for simplicity.
5207 */
5208
5209 static int
5210 tlp_2114x_nway_service(struct tulip_softc *sc, int cmd)
5211 {
5212 struct mii_data *mii = &sc->sc_mii;
5213 struct ifmedia_entry *ife = mii->mii_media.ifm_cur;
5214
5215 if ((mii->mii_ifp->if_flags & IFF_UP) == 0)
5216 return (0);
5217
5218 switch (cmd) {
5219 case MII_POLLSTAT:
5220 /* Nothing special to do here. */
5221 break;
5222
5223 case MII_MEDIACHG:
5224 switch (IFM_SUBTYPE(ife->ifm_media)) {
5225 case IFM_AUTO:
5226 goto restart;
5227 default:
5228 /* Manual setting doesn't go through here. */
5229 printf("tlp_2114x_nway_service: oops!\n");
5230 return (EINVAL);
5231 }
5232 break;
5233
5234 case MII_TICK:
5235 /*
5236 * Only used for autonegotiation.
5237 */
5238 if (IFM_SUBTYPE(ife->ifm_media) != IFM_AUTO)
5239 break;
5240
5241 /*
5242 * Check to see if we have link. If we do, we don't
5243 * need to restart the autonegotiation process.
5244 */
5245 #if 0
5246 if (mii->mii_media_status & IFM_ACTIVE)
5247 #else
5248 if (sc->sc_flags & TULIPF_LINK_UP)
5249 #endif
5250 break;
5251
5252 /*
5253 * Only retry autonegotiation every 5 seconds.
5254 */
5255 if (++sc->sc_nway_ticks != (5 << 3))
5256 break;
5257
5258 restart:
5259 sc->sc_nway_ticks = 0;
5260 ife->ifm_data = IFM_NONE;
5261 tlp_2114x_nway_auto(sc);
5262 break;
5263 }
5264
5265 /* Update the media status. */
5266 tlp_2114x_nway_status(sc);
5267
5268 /*
5269 * Callback if something changed. Manually configuration goes through
5270 * tlp_sia_set() anyway, so ignore that here.
5271 */
5272 if (IFM_SUBTYPE(ife->ifm_media) == IFM_AUTO &&
5273 ife->ifm_data != mii->mii_media_active) {
5274 (*sc->sc_statchg)(sc->sc_dev);
5275 ife->ifm_data = mii->mii_media_active;
5276 }
5277 return (0);
5278 }
5279
5280 static void
5281 tlp_2114x_nway_auto(struct tulip_softc *sc)
5282 {
5283 uint32_t siastat, siatxrx;
5284
5285 tlp_idle(sc, OPMODE_ST|OPMODE_SR);
5286
5287 sc->sc_opmode &= ~(OPMODE_PS|OPMODE_PCS|OPMODE_SCR|OPMODE_FD);
5288 sc->sc_opmode |= OPMODE_TTM|OPMODE_HBD;
5289 siatxrx = 0xffbf; /* XXX magic number */
5290
5291 /* Compute the link code word to advertise. */
5292 if (sc->sc_sia_cap & BMSR_100T4)
5293 siatxrx |= SIATXRX_T4;
5294 if (sc->sc_sia_cap & BMSR_100TXFDX)
5295 siatxrx |= SIATXRX_TXF;
5296 if (sc->sc_sia_cap & BMSR_100TXHDX)
5297 siatxrx |= SIATXRX_THX;
5298 if (sc->sc_sia_cap & BMSR_10TFDX)
5299 sc->sc_opmode |= OPMODE_FD;
5300 if (sc->sc_sia_cap & BMSR_10THDX)
5301 siatxrx |= SIATXRX_TH;
5302
5303 TULIP_WRITE(sc, CSR_OPMODE, sc->sc_opmode);
5304
5305 TULIP_WRITE(sc, CSR_SIACONN, 0);
5306 delay(1000);
5307 TULIP_WRITE(sc, CSR_SIATXRX, siatxrx);
5308 TULIP_WRITE(sc, CSR_SIACONN, SIACONN_SRL);
5309
5310 siastat = TULIP_READ(sc, CSR_SIASTAT);
5311 siastat &= ~(SIASTAT_ANS|SIASTAT_LPC|SIASTAT_TRA|SIASTAT_ARA|
5312 SIASTAT_LS100|SIASTAT_LS10|SIASTAT_MRA);
5313 siastat |= SIASTAT_ANS_TXDIS;
5314 TULIP_WRITE(sc, CSR_SIASTAT, siastat);
5315 }
5316
5317 static void
5318 tlp_2114x_nway_status(struct tulip_softc *sc)
5319 {
5320 struct mii_data *mii = &sc->sc_mii;
5321 uint32_t siatxrx, siastat, anlpar;
5322
5323 mii->mii_media_status = IFM_AVALID;
5324 mii->mii_media_active = IFM_ETHER;
5325
5326 if ((mii->mii_ifp->if_flags & IFF_UP) == 0)
5327 return;
5328
5329 siastat = TULIP_READ(sc, CSR_SIASTAT);
5330 siatxrx = TULIP_READ(sc, CSR_SIATXRX);
5331
5332 if (siatxrx & SIATXRX_ANE) {
5333 if ((siastat & SIASTAT_ANS) != SIASTAT_ANS_FLPGOOD) {
5334 /* Erg, still trying, I guess... */
5335 mii->mii_media_active |= IFM_NONE;
5336 return;
5337 }
5338
5339 if (~siastat & (SIASTAT_LS10 | SIASTAT_LS100))
5340 mii->mii_media_status |= IFM_ACTIVE;
5341
5342 if (siastat & SIASTAT_LPN) {
5343 anlpar = SIASTAT_GETLPC(siastat);
5344 if (anlpar & ANLPAR_T4 &&
5345 sc->sc_sia_cap & BMSR_100T4)
5346 mii->mii_media_active |= IFM_100_T4;
5347 else if (anlpar & ANLPAR_TX_FD &&
5348 sc->sc_sia_cap & BMSR_100TXFDX)
5349 mii->mii_media_active |= IFM_100_TX|IFM_FDX;
5350 else if (anlpar & ANLPAR_TX &&
5351 sc->sc_sia_cap & BMSR_100TXHDX)
5352 mii->mii_media_active |= IFM_100_TX;
5353 else if (anlpar & ANLPAR_10_FD &&
5354 sc->sc_sia_cap & BMSR_10TFDX)
5355 mii->mii_media_active |= IFM_10_T|IFM_FDX;
5356 else if (anlpar & ANLPAR_10 &&
5357 sc->sc_sia_cap & BMSR_10THDX)
5358 mii->mii_media_active |= IFM_10_T;
5359 else
5360 mii->mii_media_active |= IFM_NONE;
5361 } else {
5362 /*
5363 * If the other side doesn't support NWAY, then the
5364 * best we can do is determine if we have a 10Mbps or
5365 * 100Mbps link. There's no way to know if the link
5366 * is full or half duplex, so we default to half duplex
5367 * and hope that the user is clever enough to manually
5368 * change the media settings if we're wrong.
5369 */
5370 if ((siastat & SIASTAT_LS100) == 0)
5371 mii->mii_media_active |= IFM_100_TX;
5372 else if ((siastat & SIASTAT_LS10) == 0)
5373 mii->mii_media_active |= IFM_10_T;
5374 else
5375 mii->mii_media_active |= IFM_NONE;
5376 }
5377 } else {
5378 if (~siastat & (SIASTAT_LS10 | SIASTAT_LS100))
5379 mii->mii_media_status |= IFM_ACTIVE;
5380
5381 if (sc->sc_opmode & OPMODE_TTM)
5382 mii->mii_media_active |= IFM_10_T;
5383 else
5384 mii->mii_media_active |= IFM_100_TX;
5385 if (sc->sc_opmode & OPMODE_FD)
5386 mii->mii_media_active |= IFM_FDX;
5387 }
5388 }
5389
5390 static void
5391 tlp_2114x_isv_tmsw_get(struct tulip_softc *sc, struct ifmediareq *ifmr)
5392 {
5393 struct ifmedia_entry *ife = sc->sc_mii.mii_media.ifm_cur;
5394 struct tulip_21x4x_media *tm = ife->ifm_aux;
5395
5396 (*tm->tm_get)(sc, ifmr);
5397 }
5398
5399 static int
5400 tlp_2114x_isv_tmsw_set(struct tulip_softc *sc)
5401 {
5402 struct ifmedia_entry *ife = sc->sc_mii.mii_media.ifm_cur;
5403 struct tulip_21x4x_media *tm = ife->ifm_aux;
5404
5405 /*
5406 * Check to see if we need to reset the chip, and do it. The
5407 * reset path will get the OPMODE register right the next
5408 * time through.
5409 */
5410 if (TULIP_MEDIA_NEEDSRESET(sc, tm->tm_opmode))
5411 return (tlp_init(&sc->sc_ethercom.ec_if));
5412
5413 return ((*tm->tm_set)(sc));
5414 }
5415
5416 /*
5417 * MII-on-SIO media switch. Handles only MII attached to the SIO.
5418 */
5419 static void tlp_sio_mii_tmsw_init(struct tulip_softc *);
5420
5421 const struct tulip_mediasw tlp_sio_mii_mediasw = {
5422 tlp_sio_mii_tmsw_init, tlp_mii_getmedia, tlp_mii_setmedia
5423 };
5424
5425 static void
5426 tlp_sio_mii_tmsw_init(struct tulip_softc *sc)
5427 {
5428 struct ifnet *ifp = &sc->sc_ethercom.ec_if;
5429
5430 /*
5431 * We don't attach any media info structures to the ifmedia
5432 * entries, so if we're using a pre-init function that needs
5433 * that info, override it to one that doesn't.
5434 */
5435 if (sc->sc_preinit == tlp_2114x_preinit)
5436 sc->sc_preinit = tlp_2114x_mii_preinit;
5437
5438 sc->sc_mii.mii_ifp = ifp;
5439 sc->sc_mii.mii_readreg = tlp_bitbang_mii_readreg;
5440 sc->sc_mii.mii_writereg = tlp_bitbang_mii_writereg;
5441 sc->sc_mii.mii_statchg = sc->sc_statchg;
5442 ifmedia_init(&sc->sc_mii.mii_media, 0, tlp_mediachange,
5443 tlp_mediastatus);
5444 mii_attach(sc->sc_dev, &sc->sc_mii, 0xffffffff, MII_PHY_ANY,
5445 MII_OFFSET_ANY, 0);
5446 if (LIST_FIRST(&sc->sc_mii.mii_phys) == NULL) {
5447 ifmedia_add(&sc->sc_mii.mii_media, IFM_ETHER|IFM_NONE, 0, NULL);
5448 ifmedia_set(&sc->sc_mii.mii_media, IFM_ETHER|IFM_NONE);
5449 } else {
5450 sc->sc_flags |= TULIPF_HAS_MII;
5451 sc->sc_tick = tlp_mii_tick;
5452 ifmedia_set(&sc->sc_mii.mii_media, IFM_ETHER|IFM_AUTO);
5453 }
5454 }
5455
5456 /*
5457 * Lite-On PNIC media switch. Must handle MII or internal NWAY.
5458 */
5459 static void tlp_pnic_tmsw_init(struct tulip_softc *);
5460 static void tlp_pnic_tmsw_get(struct tulip_softc *, struct ifmediareq *);
5461 static int tlp_pnic_tmsw_set(struct tulip_softc *);
5462
5463 const struct tulip_mediasw tlp_pnic_mediasw = {
5464 tlp_pnic_tmsw_init, tlp_pnic_tmsw_get, tlp_pnic_tmsw_set
5465 };
5466
5467 static void tlp_pnic_nway_statchg(device_t);
5468 static void tlp_pnic_nway_tick(void *);
5469 static int tlp_pnic_nway_service(struct tulip_softc *, int);
5470 static void tlp_pnic_nway_reset(struct tulip_softc *);
5471 static int tlp_pnic_nway_auto(struct tulip_softc *, int);
5472 static void tlp_pnic_nway_auto_timeout(void *);
5473 static void tlp_pnic_nway_status(struct tulip_softc *);
5474 static void tlp_pnic_nway_acomp(struct tulip_softc *);
5475
5476 static void
5477 tlp_pnic_tmsw_init(struct tulip_softc *sc)
5478 {
5479 struct ifnet *ifp = &sc->sc_ethercom.ec_if;
5480 const char *sep = "";
5481
5482 #define ADD(m, c) ifmedia_add(&sc->sc_mii.mii_media, (m), (c), NULL)
5483 #define PRINT(str) aprint_normal("%s%s", sep, str); sep = ", "
5484
5485 sc->sc_mii.mii_ifp = ifp;
5486 sc->sc_mii.mii_readreg = tlp_pnic_mii_readreg;
5487 sc->sc_mii.mii_writereg = tlp_pnic_mii_writereg;
5488 sc->sc_mii.mii_statchg = sc->sc_statchg;
5489 ifmedia_init(&sc->sc_mii.mii_media, 0, tlp_mediachange,
5490 tlp_mediastatus);
5491 mii_attach(sc->sc_dev, &sc->sc_mii, 0xffffffff, MII_PHY_ANY,
5492 MII_OFFSET_ANY, 0);
5493 if (LIST_FIRST(&sc->sc_mii.mii_phys) == NULL) {
5494 /* XXX What about AUI/BNC support? */
5495 aprint_normal_dev(sc->sc_dev, "");
5496
5497 tlp_pnic_nway_reset(sc);
5498
5499 ADD(IFM_MAKEWORD(IFM_ETHER, IFM_10_T, 0, 0),
5500 PNIC_NWAY_TW|PNIC_NWAY_CAP10T);
5501 PRINT("10baseT");
5502
5503 ADD(IFM_MAKEWORD(IFM_ETHER, IFM_10_T, IFM_FDX, 0),
5504 PNIC_NWAY_TW|PNIC_NWAY_FD|PNIC_NWAY_CAP10TFDX);
5505 PRINT("10baseT-FDX");
5506
5507 ADD(IFM_MAKEWORD(IFM_ETHER, IFM_100_TX, 0, 0),
5508 PNIC_NWAY_TW|PNIC_NWAY_100|PNIC_NWAY_CAP100TX);
5509 PRINT("100baseTX");
5510
5511 ADD(IFM_MAKEWORD(IFM_ETHER, IFM_100_TX, IFM_FDX, 0),
5512 PNIC_NWAY_TW|PNIC_NWAY_100|PNIC_NWAY_FD|
5513 PNIC_NWAY_CAP100TXFDX);
5514 PRINT("100baseTX-FDX");
5515
5516 ADD(IFM_MAKEWORD(IFM_ETHER, IFM_AUTO, 0, 0),
5517 PNIC_NWAY_TW|PNIC_NWAY_RN|PNIC_NWAY_NW|
5518 PNIC_NWAY_CAP10T|PNIC_NWAY_CAP10TFDX|
5519 PNIC_NWAY_CAP100TXFDX|PNIC_NWAY_CAP100TX);
5520 PRINT("auto");
5521
5522 aprint_normal("\n");
5523
5524 sc->sc_statchg = tlp_pnic_nway_statchg;
5525 sc->sc_tick = tlp_pnic_nway_tick;
5526 ifmedia_set(&sc->sc_mii.mii_media, IFM_ETHER|IFM_AUTO);
5527 } else {
5528 sc->sc_flags |= TULIPF_HAS_MII;
5529 sc->sc_tick = tlp_mii_tick;
5530 ifmedia_set(&sc->sc_mii.mii_media, IFM_ETHER|IFM_AUTO);
5531 }
5532
5533 #undef ADD
5534 #undef PRINT
5535 }
5536
5537 static void
5538 tlp_pnic_tmsw_get(struct tulip_softc *sc, struct ifmediareq *ifmr)
5539 {
5540 struct mii_data *mii = &sc->sc_mii;
5541
5542 if (sc->sc_flags & TULIPF_HAS_MII)
5543 tlp_mii_getmedia(sc, ifmr);
5544 else {
5545 mii->mii_media_status = 0;
5546 mii->mii_media_active = IFM_NONE;
5547 tlp_pnic_nway_service(sc, MII_POLLSTAT);
5548 ifmr->ifm_status = sc->sc_mii.mii_media_status;
5549 ifmr->ifm_active = sc->sc_mii.mii_media_active;
5550 }
5551 }
5552
5553 static int
5554 tlp_pnic_tmsw_set(struct tulip_softc *sc)
5555 {
5556 struct ifnet *ifp = &sc->sc_ethercom.ec_if;
5557 struct mii_data *mii = &sc->sc_mii;
5558
5559 if (sc->sc_flags & TULIPF_HAS_MII) {
5560 /*
5561 * Make sure the built-in Tx jabber timer is disabled.
5562 */
5563 TULIP_WRITE(sc, CSR_PNIC_ENDEC, PNIC_ENDEC_JDIS);
5564
5565 return (tlp_mii_setmedia(sc));
5566 }
5567
5568 if (ifp->if_flags & IFF_UP) {
5569 mii->mii_media_status = 0;
5570 mii->mii_media_active = IFM_NONE;
5571 return (tlp_pnic_nway_service(sc, MII_MEDIACHG));
5572 }
5573
5574 return (0);
5575 }
5576
5577 static void
5578 tlp_pnic_nway_statchg(device_t self)
5579 {
5580 struct tulip_softc *sc = device_private(self);
5581
5582 /* Idle the transmit and receive processes. */
5583 tlp_idle(sc, OPMODE_ST|OPMODE_SR);
5584
5585 sc->sc_opmode &= ~(OPMODE_TTM|OPMODE_FD|OPMODE_PS|OPMODE_PCS|
5586 OPMODE_SCR|OPMODE_HBD);
5587
5588 if (IFM_SUBTYPE(sc->sc_mii.mii_media_active) == IFM_10_T) {
5589 sc->sc_opmode |= OPMODE_TTM;
5590 TULIP_WRITE(sc, CSR_GPP,
5591 GPP_PNIC_OUT(GPP_PNIC_PIN_SPEED_RLY, 0) |
5592 GPP_PNIC_OUT(GPP_PNIC_PIN_100M_LPKB, 1));
5593 } else {
5594 sc->sc_opmode |= OPMODE_PS|OPMODE_PCS|OPMODE_SCR|OPMODE_HBD;
5595 TULIP_WRITE(sc, CSR_GPP,
5596 GPP_PNIC_OUT(GPP_PNIC_PIN_SPEED_RLY, 1) |
5597 GPP_PNIC_OUT(GPP_PNIC_PIN_100M_LPKB, 1));
5598 }
5599
5600 if (sc->sc_mii.mii_media_active & IFM_FDX)
5601 sc->sc_opmode |= OPMODE_FD|OPMODE_HBD;
5602
5603 /*
5604 * Write new OPMODE bits. This also restarts the transmit
5605 * and receive processes.
5606 */
5607 TULIP_WRITE(sc, CSR_OPMODE, sc->sc_opmode);
5608 }
5609
5610 static void
5611 tlp_pnic_nway_tick(void *arg)
5612 {
5613 struct tulip_softc *sc = arg;
5614 int s;
5615
5616 if (!device_is_active(sc->sc_dev))
5617 return;
5618
5619 s = splnet();
5620 tlp_pnic_nway_service(sc, MII_TICK);
5621 splx(s);
5622
5623 callout_reset(&sc->sc_tick_callout, hz, tlp_pnic_nway_tick, sc);
5624 }
5625
5626 /*
5627 * Support for the Lite-On PNIC internal NWay block. This is constructed
5628 * somewhat like a PHY driver for simplicity.
5629 */
5630
5631 static int
5632 tlp_pnic_nway_service(struct tulip_softc *sc, int cmd)
5633 {
5634 struct mii_data *mii = &sc->sc_mii;
5635 struct ifmedia_entry *ife = mii->mii_media.ifm_cur;
5636
5637 if ((mii->mii_ifp->if_flags & IFF_UP) == 0)
5638 return (0);
5639
5640 switch (cmd) {
5641 case MII_POLLSTAT:
5642 /* Nothing special to do here. */
5643 break;
5644
5645 case MII_MEDIACHG:
5646 switch (IFM_SUBTYPE(ife->ifm_media)) {
5647 case IFM_AUTO:
5648 (void) tlp_pnic_nway_auto(sc, 1);
5649 break;
5650 case IFM_100_T4:
5651 /*
5652 * XXX Not supported as a manual setting right now.
5653 */
5654 return (EINVAL);
5655 default:
5656 /*
5657 * NWAY register data is stored in the ifmedia entry.
5658 */
5659 TULIP_WRITE(sc, CSR_PNIC_NWAY, ife->ifm_data);
5660 }
5661 break;
5662
5663 case MII_TICK:
5664 /*
5665 * Only used for autonegotiation.
5666 */
5667 if (IFM_SUBTYPE(ife->ifm_media) != IFM_AUTO)
5668 return (0);
5669
5670 /*
5671 * Check to see if we have link. If we do, we don't
5672 * need to restart the autonegotiation process.
5673 */
5674 if (sc->sc_flags & TULIPF_LINK_UP)
5675 return (0);
5676
5677 /*
5678 * Only retry autonegotiation every 5 seconds.
5679 */
5680 if (++sc->sc_nway_ticks != 5)
5681 return (0);
5682
5683 sc->sc_nway_ticks = 0;
5684 tlp_pnic_nway_reset(sc);
5685 if (tlp_pnic_nway_auto(sc, 0) == EJUSTRETURN)
5686 return (0);
5687 break;
5688 }
5689
5690 /* Update the media status. */
5691 tlp_pnic_nway_status(sc);
5692
5693 /* Callback if something changed. */
5694 if ((sc->sc_nway_active == NULL ||
5695 sc->sc_nway_active->ifm_media != mii->mii_media_active) ||
5696 cmd == MII_MEDIACHG) {
5697 (*sc->sc_statchg)(sc->sc_dev);
5698 tlp_nway_activate(sc, mii->mii_media_active);
5699 }
5700 return (0);
5701 }
5702
5703 static void
5704 tlp_pnic_nway_reset(struct tulip_softc *sc)
5705 {
5706
5707 TULIP_WRITE(sc, CSR_PNIC_NWAY, PNIC_NWAY_RS);
5708 delay(100);
5709 TULIP_WRITE(sc, CSR_PNIC_NWAY, 0);
5710 }
5711
5712 static int
5713 tlp_pnic_nway_auto(struct tulip_softc *sc, int waitfor)
5714 {
5715 struct mii_data *mii = &sc->sc_mii;
5716 struct ifmedia_entry *ife = mii->mii_media.ifm_cur;
5717 uint32_t reg;
5718 int i;
5719
5720 if ((sc->sc_flags & TULIPF_DOINGAUTO) == 0)
5721 TULIP_WRITE(sc, CSR_PNIC_NWAY, ife->ifm_data);
5722
5723 if (waitfor) {
5724 /* Wait 500ms for it to complete. */
5725 for (i = 0; i < 500; i++) {
5726 reg = TULIP_READ(sc, CSR_PNIC_NWAY);
5727 if (reg & PNIC_NWAY_LPAR_MASK) {
5728 tlp_pnic_nway_acomp(sc);
5729 return (0);
5730 }
5731 delay(1000);
5732 }
5733 #if 0
5734 if ((reg & PNIC_NWAY_LPAR_MASK) == 0)
5735 aprint_error_dev(sc->sc_dev, "autonegotiation failed to complete\n");
5736 #endif
5737
5738 /*
5739 * Don't need to worry about clearing DOINGAUTO.
5740 * If that's set, a timeout is pending, and it will
5741 * clear the flag.
5742 */
5743 return (EIO);
5744 }
5745
5746 /*
5747 * Just let it finish asynchronously. This is for the benefit of
5748 * the tick handler driving autonegotiation. Don't want 500ms
5749 * delays all the time while the system is running!
5750 */
5751 if ((sc->sc_flags & TULIPF_DOINGAUTO) == 0) {
5752 sc->sc_flags |= TULIPF_DOINGAUTO;
5753 callout_reset(&sc->sc_nway_callout, hz >> 1,
5754 tlp_pnic_nway_auto_timeout, sc);
5755 }
5756 return (EJUSTRETURN);
5757 }
5758
5759 static void
5760 tlp_pnic_nway_auto_timeout(void *arg)
5761 {
5762 struct tulip_softc *sc = arg;
5763 uint32_t reg;
5764 int s;
5765
5766 s = splnet();
5767 sc->sc_flags &= ~TULIPF_DOINGAUTO;
5768 reg = TULIP_READ(sc, CSR_PNIC_NWAY);
5769 #if 0
5770 if ((reg & PNIC_NWAY_LPAR_MASK) == 0)
5771 aprint_error_dev(sc->sc_dev, "autonegotiation failed to complete\n");
5772 #endif
5773
5774 tlp_pnic_nway_acomp(sc);
5775
5776 /* Update the media status. */
5777 (void) tlp_pnic_nway_service(sc, MII_POLLSTAT);
5778 splx(s);
5779 }
5780
5781 static void
5782 tlp_pnic_nway_status(struct tulip_softc *sc)
5783 {
5784 struct mii_data *mii = &sc->sc_mii;
5785 uint32_t reg;
5786
5787 mii->mii_media_status = IFM_AVALID;
5788 mii->mii_media_active = IFM_ETHER;
5789
5790 reg = TULIP_READ(sc, CSR_PNIC_NWAY);
5791
5792 if (sc->sc_flags & TULIPF_LINK_UP)
5793 mii->mii_media_status |= IFM_ACTIVE;
5794
5795 if (reg & PNIC_NWAY_NW) {
5796 if ((reg & PNIC_NWAY_LPAR_MASK) == 0) {
5797 /* Erg, still trying, I guess... */
5798 mii->mii_media_active |= IFM_NONE;
5799 return;
5800 }
5801
5802 #if 0
5803 if (reg & PNIC_NWAY_LPAR100T4)
5804 mii->mii_media_active |= IFM_100_T4;
5805 else
5806 #endif
5807 if (reg & PNIC_NWAY_LPAR100TXFDX)
5808 mii->mii_media_active |= IFM_100_TX|IFM_FDX;
5809 else if (reg & PNIC_NWAY_LPAR100TX)
5810 mii->mii_media_active |= IFM_100_TX;
5811 else if (reg & PNIC_NWAY_LPAR10TFDX)
5812 mii->mii_media_active |= IFM_10_T|IFM_FDX;
5813 else if (reg & PNIC_NWAY_LPAR10T)
5814 mii->mii_media_active |= IFM_10_T;
5815 else
5816 mii->mii_media_active |= IFM_NONE;
5817 } else {
5818 if (reg & PNIC_NWAY_100)
5819 mii->mii_media_active |= IFM_100_TX;
5820 else
5821 mii->mii_media_active |= IFM_10_T;
5822 if (reg & PNIC_NWAY_FD)
5823 mii->mii_media_active |= IFM_FDX;
5824 }
5825 }
5826
5827 static void
5828 tlp_pnic_nway_acomp(struct tulip_softc *sc)
5829 {
5830 uint32_t reg;
5831
5832 reg = TULIP_READ(sc, CSR_PNIC_NWAY);
5833 reg &= ~(PNIC_NWAY_FD|PNIC_NWAY_100|PNIC_NWAY_RN);
5834
5835 if (reg & (PNIC_NWAY_LPAR100TXFDX|PNIC_NWAY_LPAR100TX))
5836 reg |= PNIC_NWAY_100;
5837 if (reg & (PNIC_NWAY_LPAR10TFDX|PNIC_NWAY_LPAR100TXFDX))
5838 reg |= PNIC_NWAY_FD;
5839
5840 TULIP_WRITE(sc, CSR_PNIC_NWAY, reg);
5841 }
5842
5843 /*
5844 * Macronix PMAC and Lite-On PNIC-II media switch:
5845 *
5846 * MX98713 and MX98713A 21140-like MII or GPIO media.
5847 *
5848 * MX98713A 21143-like MII or SIA/SYM media.
5849 *
5850 * MX98715, MX98715A, MX98725, 21143-like SIA/SYM media.
5851 * 82C115, MX98715AEC-C, -E
5852 *
5853 * So, what we do here is fake MII-on-SIO or ISV media info, and
5854 * use the ISV media switch get/set functions to handle the rest.
5855 */
5856
5857 static void tlp_pmac_tmsw_init(struct tulip_softc *);
5858
5859 const struct tulip_mediasw tlp_pmac_mediasw = {
5860 tlp_pmac_tmsw_init, tlp_2114x_isv_tmsw_get, tlp_2114x_isv_tmsw_set
5861 };
5862
5863 const struct tulip_mediasw tlp_pmac_mii_mediasw = {
5864 tlp_pmac_tmsw_init, tlp_mii_getmedia, tlp_mii_setmedia
5865 };
5866
5867 static void
5868 tlp_pmac_tmsw_init(struct tulip_softc *sc)
5869 {
5870 static const uint8_t media[] = {
5871 TULIP_ROM_MB_MEDIA_TP,
5872 TULIP_ROM_MB_MEDIA_TP_FDX,
5873 TULIP_ROM_MB_MEDIA_100TX,
5874 TULIP_ROM_MB_MEDIA_100TX_FDX,
5875 };
5876 struct ifnet *ifp = &sc->sc_ethercom.ec_if;
5877 struct tulip_21x4x_media *tm;
5878
5879 sc->sc_mii.mii_ifp = ifp;
5880 sc->sc_mii.mii_readreg = tlp_bitbang_mii_readreg;
5881 sc->sc_mii.mii_writereg = tlp_bitbang_mii_writereg;
5882 sc->sc_mii.mii_statchg = sc->sc_statchg;
5883 ifmedia_init(&sc->sc_mii.mii_media, 0, tlp_mediachange,
5884 tlp_mediastatus);
5885 if (sc->sc_chip == TULIP_CHIP_MX98713 ||
5886 sc->sc_chip == TULIP_CHIP_MX98713A) {
5887 mii_attach(sc->sc_dev, &sc->sc_mii, 0xffffffff,
5888 MII_PHY_ANY, MII_OFFSET_ANY, 0);
5889 if (LIST_FIRST(&sc->sc_mii.mii_phys) != NULL) {
5890 sc->sc_flags |= TULIPF_HAS_MII;
5891 sc->sc_tick = tlp_mii_tick;
5892 sc->sc_preinit = tlp_2114x_mii_preinit;
5893 sc->sc_mediasw = &tlp_pmac_mii_mediasw;
5894 ifmedia_set(&sc->sc_mii.mii_media,
5895 IFM_ETHER|IFM_AUTO);
5896 return;
5897 }
5898 }
5899
5900 switch (sc->sc_chip) {
5901 case TULIP_CHIP_MX98713:
5902 tlp_add_srom_media(sc, TULIP_ROM_MB_21140_GPR,
5903 tlp_21140_gpio_get, tlp_21140_gpio_set, media, 4);
5904
5905 /*
5906 * XXX Should implement auto-sense for this someday,
5907 * XXX when we do the same for the 21140.
5908 */
5909 ifmedia_set(&sc->sc_mii.mii_media, IFM_ETHER|IFM_10_T);
5910 break;
5911
5912 default:
5913 tlp_add_srom_media(sc, TULIP_ROM_MB_21142_SIA,
5914 tlp_sia_get, tlp_sia_set, media, 2);
5915 tlp_add_srom_media(sc, TULIP_ROM_MB_21143_SYM,
5916 tlp_sia_get, tlp_sia_set, media + 2, 2);
5917
5918 tm = malloc(sizeof(*tm), M_DEVBUF, M_WAITOK|M_ZERO);
5919 tm->tm_name = "auto";
5920 tm->tm_get = tlp_2114x_nway_get;
5921 tm->tm_set = tlp_2114x_nway_set;
5922 ifmedia_add(&sc->sc_mii.mii_media,
5923 IFM_MAKEWORD(IFM_ETHER, IFM_AUTO, 0, 0), 0, tm);
5924
5925 ifmedia_set(&sc->sc_mii.mii_media, IFM_ETHER|IFM_AUTO);
5926 sc->sc_statchg = tlp_2114x_nway_statchg;
5927 sc->sc_tick = tlp_2114x_nway_tick;
5928 break;
5929 }
5930
5931 tlp_print_media(sc);
5932 tlp_sia_fixup(sc);
5933
5934 /* Set the LED modes. */
5935 tlp_pmac_reset(sc);
5936
5937 sc->sc_reset = tlp_pmac_reset;
5938 }
5939
5940 /*
5941 * ADMtek AL981 media switch. Only has internal PHY.
5942 */
5943 static void tlp_al981_tmsw_init(struct tulip_softc *);
5944
5945 const struct tulip_mediasw tlp_al981_mediasw = {
5946 tlp_al981_tmsw_init, tlp_mii_getmedia, tlp_mii_setmedia
5947 };
5948
5949 static void
5950 tlp_al981_tmsw_init(struct tulip_softc *sc)
5951 {
5952 struct ifnet *ifp = &sc->sc_ethercom.ec_if;
5953
5954 sc->sc_mii.mii_ifp = ifp;
5955 sc->sc_mii.mii_readreg = tlp_al981_mii_readreg;
5956 sc->sc_mii.mii_writereg = tlp_al981_mii_writereg;
5957 sc->sc_mii.mii_statchg = sc->sc_statchg;
5958 ifmedia_init(&sc->sc_mii.mii_media, 0, tlp_mediachange,
5959 tlp_mediastatus);
5960 mii_attach(sc->sc_dev, &sc->sc_mii, 0xffffffff, MII_PHY_ANY,
5961 MII_OFFSET_ANY, 0);
5962 if (LIST_FIRST(&sc->sc_mii.mii_phys) == NULL) {
5963 ifmedia_add(&sc->sc_mii.mii_media, IFM_ETHER|IFM_NONE, 0, NULL);
5964 ifmedia_set(&sc->sc_mii.mii_media, IFM_ETHER|IFM_NONE);
5965 } else {
5966 sc->sc_flags |= TULIPF_HAS_MII;
5967 sc->sc_tick = tlp_mii_tick;
5968 ifmedia_set(&sc->sc_mii.mii_media, IFM_ETHER|IFM_AUTO);
5969 }
5970 }
5971
5972 /*
5973 * ADMtek AN983/985 media switch. Only has internal PHY, but
5974 * on an SIO-like interface. Unfortunately, we can't use the
5975 * standard SIO media switch, because the AN985 "ghosts" the
5976 * singly PHY at every address.
5977 */
5978 static void tlp_an985_tmsw_init(struct tulip_softc *);
5979
5980 const struct tulip_mediasw tlp_an985_mediasw = {
5981 tlp_an985_tmsw_init, tlp_mii_getmedia, tlp_mii_setmedia
5982 };
5983
5984 static void
5985 tlp_an985_tmsw_init(struct tulip_softc *sc)
5986 {
5987 struct ifnet *ifp = &sc->sc_ethercom.ec_if;
5988
5989 sc->sc_mii.mii_ifp = ifp;
5990 sc->sc_mii.mii_readreg = tlp_bitbang_mii_readreg;
5991 sc->sc_mii.mii_writereg = tlp_bitbang_mii_writereg;
5992 sc->sc_mii.mii_statchg = sc->sc_statchg;
5993 ifmedia_init(&sc->sc_mii.mii_media, 0, tlp_mediachange,
5994 tlp_mediastatus);
5995 mii_attach(sc->sc_dev, &sc->sc_mii, 0xffffffff, 1,
5996 MII_OFFSET_ANY, 0);
5997 if (LIST_FIRST(&sc->sc_mii.mii_phys) == NULL) {
5998 ifmedia_add(&sc->sc_mii.mii_media, IFM_ETHER|IFM_NONE, 0, NULL);
5999 ifmedia_set(&sc->sc_mii.mii_media, IFM_ETHER|IFM_NONE);
6000 } else {
6001 sc->sc_flags |= TULIPF_HAS_MII;
6002 sc->sc_tick = tlp_mii_tick;
6003 ifmedia_set(&sc->sc_mii.mii_media, IFM_ETHER|IFM_AUTO);
6004 }
6005 }
6006
6007 /*
6008 * Davicom DM9102 media switch. Internal PHY and possibly HomePNA.
6009 */
6010 static void tlp_dm9102_tmsw_init(struct tulip_softc *);
6011 static void tlp_dm9102_tmsw_getmedia(struct tulip_softc *,
6012 struct ifmediareq *);
6013 static int tlp_dm9102_tmsw_setmedia(struct tulip_softc *);
6014
6015 const struct tulip_mediasw tlp_dm9102_mediasw = {
6016 tlp_dm9102_tmsw_init, tlp_dm9102_tmsw_getmedia,
6017 tlp_dm9102_tmsw_setmedia
6018 };
6019
6020 static void
6021 tlp_dm9102_tmsw_init(struct tulip_softc *sc)
6022 {
6023 struct ifnet *ifp = &sc->sc_ethercom.ec_if;
6024 uint32_t opmode;
6025
6026 sc->sc_mii.mii_ifp = ifp;
6027 sc->sc_mii.mii_readreg = tlp_bitbang_mii_readreg;
6028 sc->sc_mii.mii_writereg = tlp_bitbang_mii_writereg;
6029 sc->sc_mii.mii_statchg = sc->sc_statchg;
6030 ifmedia_init(&sc->sc_mii.mii_media, 0, tlp_mediachange,
6031 tlp_mediastatus);
6032
6033 /* PHY block already reset via tlp_reset(). */
6034
6035 /*
6036 * Configure OPMODE properly for the internal MII interface.
6037 */
6038 switch (sc->sc_chip) {
6039 case TULIP_CHIP_DM9102:
6040 opmode = OPMODE_MBO|OPMODE_HBD|OPMODE_PS;
6041 break;
6042
6043 case TULIP_CHIP_DM9102A:
6044 opmode = OPMODE_MBO|OPMODE_HBD;
6045 break;
6046
6047 default:
6048 opmode = 0;
6049 break;
6050 }
6051
6052 TULIP_WRITE(sc, CSR_OPMODE, opmode);
6053
6054 /* Now, probe the internal MII for the internal PHY. */
6055 mii_attach(sc->sc_dev, &sc->sc_mii, 0xffffffff, MII_PHY_ANY,
6056 MII_OFFSET_ANY, 0);
6057
6058 /*
6059 * XXX Figure out what to do about the HomePNA portion
6060 * XXX of the DM9102A.
6061 */
6062
6063 if (LIST_FIRST(&sc->sc_mii.mii_phys) == NULL) {
6064 ifmedia_add(&sc->sc_mii.mii_media, IFM_ETHER|IFM_NONE, 0, NULL);
6065 ifmedia_set(&sc->sc_mii.mii_media, IFM_ETHER|IFM_NONE);
6066 } else {
6067 sc->sc_flags |= TULIPF_HAS_MII;
6068 sc->sc_tick = tlp_mii_tick;
6069 ifmedia_set(&sc->sc_mii.mii_media, IFM_ETHER|IFM_AUTO);
6070 }
6071 }
6072
6073 static void
6074 tlp_dm9102_tmsw_getmedia(struct tulip_softc *sc, struct ifmediareq *ifmr)
6075 {
6076
6077 /* XXX HomePNA on DM9102A. */
6078 tlp_mii_getmedia(sc, ifmr);
6079 }
6080
6081 static int
6082 tlp_dm9102_tmsw_setmedia(struct tulip_softc *sc)
6083 {
6084
6085 /* XXX HomePNA on DM9102A. */
6086 return (tlp_mii_setmedia(sc));
6087 }
6088
6089 /*
6090 * ASIX AX88140A/AX88141 media switch. Internal PHY or MII.
6091 */
6092
6093 static void tlp_asix_tmsw_init(struct tulip_softc *);
6094 static void tlp_asix_tmsw_getmedia(struct tulip_softc *,
6095 struct ifmediareq *);
6096 static int tlp_asix_tmsw_setmedia(struct tulip_softc *);
6097
6098 const struct tulip_mediasw tlp_asix_mediasw = {
6099 tlp_asix_tmsw_init, tlp_asix_tmsw_getmedia,
6100 tlp_asix_tmsw_setmedia
6101 };
6102
6103 static void
6104 tlp_asix_tmsw_init(struct tulip_softc *sc)
6105 {
6106 struct ifnet *ifp = &sc->sc_ethercom.ec_if;
6107 uint32_t opmode;
6108
6109 sc->sc_mii.mii_ifp = ifp;
6110 sc->sc_mii.mii_readreg = tlp_bitbang_mii_readreg;
6111 sc->sc_mii.mii_writereg = tlp_bitbang_mii_writereg;
6112 sc->sc_mii.mii_statchg = sc->sc_statchg;
6113 ifmedia_init(&sc->sc_mii.mii_media, 0, tlp_mediachange,
6114 tlp_mediastatus);
6115
6116 /*
6117 * Configure OPMODE properly for the internal MII interface.
6118 */
6119 switch (sc->sc_chip) {
6120 case TULIP_CHIP_AX88140:
6121 case TULIP_CHIP_AX88141:
6122 opmode = OPMODE_HBD|OPMODE_PS;
6123 break;
6124 default:
6125 opmode = 0;
6126 break;
6127 }
6128
6129 TULIP_WRITE(sc, CSR_OPMODE, opmode);
6130
6131 /* Now, probe the internal MII for the internal PHY. */
6132 mii_attach(sc->sc_dev, &sc->sc_mii, 0xffffffff, MII_PHY_ANY,
6133 MII_OFFSET_ANY, 0);
6134
6135 /* XXX Figure how to handle the PHY. */
6136
6137 if (LIST_FIRST(&sc->sc_mii.mii_phys) == NULL) {
6138 ifmedia_add(&sc->sc_mii.mii_media, IFM_ETHER|IFM_NONE, 0, NULL);
6139 ifmedia_set(&sc->sc_mii.mii_media, IFM_ETHER|IFM_NONE);
6140 } else {
6141 sc->sc_flags |= TULIPF_HAS_MII;
6142 sc->sc_tick = tlp_mii_tick;
6143 ifmedia_set(&sc->sc_mii.mii_media, IFM_ETHER|IFM_AUTO);
6144 }
6145
6146
6147 }
6148
6149 static void
6150 tlp_asix_tmsw_getmedia(struct tulip_softc *sc, struct ifmediareq *ifmr)
6151 {
6152
6153 /* XXX PHY handling. */
6154 tlp_mii_getmedia(sc, ifmr);
6155 }
6156
6157 static int
6158 tlp_asix_tmsw_setmedia(struct tulip_softc *sc)
6159 {
6160
6161 /* XXX PHY handling. */
6162 return (tlp_mii_setmedia(sc));
6163 }
6164
6165 /*
6166 * RS7112 media switch. Handles only MII attached to the SIO.
6167 * We only have a PHY at 1.
6168 */
6169 void tlp_rs7112_tmsw_init(struct tulip_softc *);
6170
6171 const struct tulip_mediasw tlp_rs7112_mediasw = {
6172 tlp_rs7112_tmsw_init, tlp_mii_getmedia, tlp_mii_setmedia
6173 };
6174
6175 void
6176 tlp_rs7112_tmsw_init(struct tulip_softc *sc)
6177 {
6178 struct ifnet *ifp = &sc->sc_ethercom.ec_if;
6179
6180 /*
6181 * We don't attach any media info structures to the ifmedia
6182 * entries, so if we're using a pre-init function that needs
6183 * that info, override it to one that doesn't.
6184 */
6185 if (sc->sc_preinit == tlp_2114x_preinit)
6186 sc->sc_preinit = tlp_2114x_mii_preinit;
6187
6188 sc->sc_mii.mii_ifp = ifp;
6189 sc->sc_mii.mii_readreg = tlp_bitbang_mii_readreg;
6190 sc->sc_mii.mii_writereg = tlp_bitbang_mii_writereg;
6191 sc->sc_mii.mii_statchg = sc->sc_statchg;
6192 ifmedia_init(&sc->sc_mii.mii_media, 0, tlp_mediachange,
6193 tlp_mediastatus);
6194
6195 /*
6196 * The RS7112 reports a PHY at 0 (possibly HomePNA?)
6197 * and 1 (ethernet). We attach ethernet only.
6198 */
6199 mii_attach(sc->sc_dev, &sc->sc_mii, 0xffffffff, 1,
6200 MII_OFFSET_ANY, 0);
6201
6202 if (LIST_FIRST(&sc->sc_mii.mii_phys) == NULL) {
6203 ifmedia_add(&sc->sc_mii.mii_media, IFM_ETHER|IFM_NONE, 0, NULL);
6204 ifmedia_set(&sc->sc_mii.mii_media, IFM_ETHER|IFM_NONE);
6205 } else {
6206 sc->sc_flags |= TULIPF_HAS_MII;
6207 sc->sc_tick = tlp_mii_tick;
6208 ifmedia_set(&sc->sc_mii.mii_media, IFM_ETHER|IFM_AUTO);
6209 }
6210 }
NetBSD on the FriendlyARM MINI2440