Sync usage with man page.
[netbsd-mini2440.git] / sys / dev / usb / if_auereg.h
bloba334e94f82981df8777c1fa23b5f75b757c9edd2
1 /* $NetBSD: if_auereg.h,v 1.22 2009/09/04 17:53:58 dyoung Exp $ */
2 /*
3 * Copyright (c) 1997, 1998, 1999
4 * Bill Paul <wpaul@ee.columbia.edu>. All rights reserved.
6 * Redistribution and use in source and binary forms, with or without
7 * modification, are permitted provided that the following conditions
8 * are met:
9 * 1. Redistributions of source code must retain the above copyright
10 * notice, this list of conditions and the following disclaimer.
11 * 2. Redistributions in binary form must reproduce the above copyright
12 * notice, this list of conditions and the following disclaimer in the
13 * documentation and/or other materials provided with the distribution.
14 * 3. All advertising materials mentioning features or use of this software
15 * must display the following acknowledgement:
16 * This product includes software developed by Bill Paul.
17 * 4. Neither the name of the author nor the names of any co-contributors
18 * may be used to endorse or promote products derived from this software
19 * without specific prior written permission.
21 * THIS SOFTWARE IS PROVIDED BY Bill Paul AND CONTRIBUTORS ``AS IS'' AND
22 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
23 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
24 * ARE DISCLAIMED. IN NO EVENT SHALL Bill Paul OR THE VOICES IN HIS HEAD
25 * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
26 * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
27 * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
28 * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
29 * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
30 * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF
31 * THE POSSIBILITY OF SUCH DAMAGE.
33 * $FreeBSD: src/sys/dev/usb/if_auereg.h,v 1.2 2000/01/08 06:52:36 wpaul Exp $
37 * Register definitions for ADMtek Pegasus AN986 USB to Ethernet
38 * chip. The Pegasus uses a total of four USB endpoints: the control
39 * endpoint (0), a bulk read endpoint for receiving packets (1),
40 * a bulk write endpoint for sending packets (2) and an interrupt
41 * endpoint for passing RX and TX status (3). Endpoint 0 is used
42 * to read and write the ethernet module's registers. All registers
43 * are 8 bits wide.
45 * Packet transfer is done in 64 byte chunks. The last chunk in a
46 * transfer is denoted by having a length less that 64 bytes. For
47 * the RX case, the data includes an optional RX status word.
50 #define AUE_UR_READREG 0xF0
51 #define AUE_UR_WRITEREG 0xF1
53 #define AUE_CONFIG_NO 1
54 #define AUE_IFACE_IDX 0
57 * Note that while the ADMtek technically has four
58 * endpoints, the control endpoint (endpoint 0) is
59 * regarded as special by the USB code and drivers
60 * don't have direct access to it. (We access it
61 * using usbd_do_request() when reading/writing
62 * registers.) Consequently, our endpoint indexes
63 * don't match those in the ADMtek Pegasus manual:
64 * we consider the RX data endpoint to be index 0
65 * and work up from there.
67 #define AUE_ENDPT_RX 0x0
68 #define AUE_ENDPT_TX 0x1
69 #define AUE_ENDPT_INTR 0x2
70 #define AUE_ENDPT_MAX 0x3
72 #define AUE_CTL0 0x00
73 #define AUE_CTL1 0x01
74 #define AUE_CTL2 0x02
75 #define AUE_MAR0 0x08
76 #define AUE_MAR1 0x09
77 #define AUE_MAR2 0x0A
78 #define AUE_MAR3 0x0B
79 #define AUE_MAR4 0x0C
80 #define AUE_MAR5 0x0D
81 #define AUE_MAR6 0x0E
82 #define AUE_MAR7 0x0F
83 #define AUE_MAR AUE_MAR0
84 #define AUE_PAR0 0x10
85 #define AUE_PAR1 0x11
86 #define AUE_PAR2 0x12
87 #define AUE_PAR3 0x13
88 #define AUE_PAR4 0x14
89 #define AUE_PAR5 0x15
90 #define AUE_PAR AUE_PAR0
91 #define AUE_PAUSE0 0x18
92 #define AUE_PAUSE1 0x19
93 #define AUE_PAUSE AUE_PAUSE0
94 #define AUE_RX_FLOWCTL_CNT 0x1A
95 #define AUE_RX_FLOWCTL_FIFO 0x1B
96 #define AUE_REG_1D 0x1D
97 #define AUE_EE_REG 0x20
98 #define AUE_EE_DATA0 0x21
99 #define AUE_EE_DATA1 0x22
100 #define AUE_EE_DATA AUE_EE_DATA0
101 #define AUE_EE_CTL 0x23
102 #define AUE_PHY_ADDR 0x25
103 #define AUE_PHY_DATA0 0x26
104 #define AUE_PHY_DATA1 0x27
105 #define AUE_PHY_DATA AUE_PHY_DATA0
106 #define AUE_PHY_CTL 0x28
107 #define AUE_USB_STS 0x2A
108 #define AUE_TXSTAT0 0x2B
109 #define AUE_TXSTAT1 0x2C
110 #define AUE_TXSTAT AUE_TXSTAT0
111 #define AUE_RXSTAT 0x2D
112 #define AUE_PKTLOST0 0x2E
113 #define AUE_PKTLOST1 0x2F
114 #define AUE_PKTLOST AUE_PKTLOST0
116 #define AUE_REG_7B 0x7B
117 #define AUE_GPIO0 0x7E
118 #define AUE_GPIO1 0x7F
119 #define AUE_REG_81 0x81
121 #define AUE_CTL0_INCLUDE_RXCRC 0x01
122 #define AUE_CTL0_ALLMULTI 0x02
123 #define AUE_CTL0_STOP_BACKOFF 0x04
124 #define AUE_CTL0_RXSTAT_APPEND 0x08
125 #define AUE_CTL0_WAKEON_ENB 0x10
126 #define AUE_CTL0_RXPAUSE_ENB 0x20
127 #define AUE_CTL0_RX_ENB 0x40
128 #define AUE_CTL0_TX_ENB 0x80
130 #define AUE_CTL1_HOMELAN 0x04
131 #define AUE_CTL1_RESETMAC 0x08
132 #define AUE_CTL1_SPEEDSEL 0x10 /* 0 = 10mbps, 1 = 100mbps */
133 #define AUE_CTL1_DUPLEX 0x20 /* 0 = half, 1 = full */
134 #define AUE_CTL1_DELAYHOME 0x40
136 #define AUE_CTL2_EP3_CLR 0x01 /* reading EP3 clrs status regs */
137 #define AUE_CTL2_RX_BADFRAMES 0x02
138 #define AUE_CTL2_RX_PROMISC 0x04
139 #define AUE_CTL2_LOOPBACK 0x08
140 #define AUE_CTL2_EEPROMWR_ENB 0x10
141 #define AUE_CTL2_EEPROM_LOAD 0x20
143 #define AUE_EECTL_WRITE 0x01
144 #define AUE_EECTL_READ 0x02
145 #define AUE_EECTL_DONE 0x04
147 #define AUE_PHYCTL_PHYREG 0x1F
148 #define AUE_PHYCTL_WRITE 0x20
149 #define AUE_PHYCTL_READ 0x40
150 #define AUE_PHYCTL_DONE 0x80
152 #define AUE_USBSTS_SUSPEND 0x01
153 #define AUE_USBSTS_RESUME 0x02
155 #define AUE_TXSTAT0_JABTIMO 0x04
156 #define AUE_TXSTAT0_CARLOSS 0x08
157 #define AUE_TXSTAT0_NOCARRIER 0x10
158 #define AUE_TXSTAT0_LATECOLL 0x20
159 #define AUE_TXSTAT0_EXCESSCOLL 0x40
160 #define AUE_TXSTAT0_UNDERRUN 0x80
162 #define AUE_TXSTAT1_PKTCNT 0x0F
163 #define AUE_TXSTAT1_FIFO_EMPTY 0x40
164 #define AUE_TXSTAT1_FIFO_FULL 0x80
166 #define AUE_RXSTAT_OVERRUN 0x01
167 #define AUE_RXSTAT_PAUSE 0x02
169 #define AUE_GPIO_IN0 0x01
170 #define AUE_GPIO_OUT0 0x02
171 #define AUE_GPIO_SEL0 0x04
172 #define AUE_GPIO_IN1 0x08
173 #define AUE_GPIO_OUT1 0x10
174 #define AUE_GPIO_SEL1 0x20
176 struct aue_intrpkt {
177 u_int8_t aue_txstat0;
178 u_int8_t aue_txstat1;
179 u_int8_t aue_rxstat;
180 u_int8_t aue_rxlostpkt0;
181 u_int8_t aue_rxlostpkt1;
182 u_int8_t aue_wakeupstat;
183 u_int8_t aue_rsvd;
184 u_int8_t _pad;
186 #define AUE_INTR_PKTLEN 8
188 struct aue_rxpkt {
189 uWord aue_pktlen;
190 uByte aue_rxstat;
193 #define AUE_RXSTAT_MCAST 0x01
194 #define AUE_RXSTAT_GIANT 0x02
195 #define AUE_RXSTAT_RUNT 0x04
196 #define AUE_RXSTAT_CRCERR 0x08
197 #define AUE_RXSTAT_DRIBBLE 0x10
198 #define AUE_RXSTAT_MASK 0x1E
201 /*************** The rest belongs in if_auevar.h *************/
203 #define AUE_TX_LIST_CNT 1
204 #define AUE_RX_LIST_CNT 1
206 struct aue_softc;
208 struct aue_chain {
209 struct aue_softc *aue_sc;
210 usbd_xfer_handle aue_xfer;
211 char *aue_buf;
212 struct mbuf *aue_mbuf;
213 int aue_idx;
216 struct aue_cdata {
217 struct aue_chain aue_tx_chain[AUE_TX_LIST_CNT];
218 struct aue_chain aue_rx_chain[AUE_RX_LIST_CNT];
219 struct aue_intrpkt aue_ibuf;
220 int aue_tx_prod;
221 int aue_tx_cons;
222 int aue_tx_cnt;
223 int aue_rx_prod;
226 struct aue_softc {
227 device_t aue_dev;
229 struct ethercom aue_ec;
230 struct mii_data aue_mii;
231 #if NRND > 0
232 rndsource_element_t rnd_source;
233 #endif
234 struct lwp *aue_thread;
235 int aue_closing;
236 kcondvar_t aue_domc;
237 kcondvar_t aue_closemc;
238 kmutex_t aue_mcmtx;
239 #define GET_IFP(sc) (&(sc)->aue_ec.ec_if)
240 #define GET_MII(sc) (&(sc)->aue_mii)
242 struct callout aue_stat_ch;
244 usbd_device_handle aue_udev;
245 usbd_interface_handle aue_iface;
246 u_int16_t aue_vendor;
247 u_int16_t aue_product;
248 int aue_ed[AUE_ENDPT_MAX];
249 usbd_pipe_handle aue_ep[AUE_ENDPT_MAX];
250 u_int8_t aue_link;
251 int aue_if_flags;
252 struct aue_cdata aue_cdata;
254 u_int16_t aue_flags;
256 int aue_refcnt;
257 char aue_dying;
258 char aue_attached;
259 u_int aue_rx_errs;
260 u_int aue_intr_errs;
261 struct timeval aue_rx_notice;
263 struct usb_task aue_tick_task;
264 struct usb_task aue_stop_task;
266 kmutex_t aue_mii_lock;
269 #define AUE_TIMEOUT 1000
270 #define ETHER_ALIGN 2
271 #define AUE_BUFSZ 1536
272 #define AUE_MIN_FRAMELEN 60
273 #define AUE_TX_TIMEOUT 10000 /* ms */
274 #define AUE_INTR_INTERVAL 100 /* ms */