usr.sbin/memswitch/properties.c

   1 /*      $NetBSD: properties.c,v 1.3 2001/02/21 13:09:18 minoura Exp $   */
   2
   3 /*-
   4  * Copyright (c) 1999 The NetBSD Foundation, Inc.
   5  * All rights reserved.
   6  *
   7  * This code is derived from software contributed to The NetBSD Foundation
   8  * by Minoura Makoto.
   9  *
  10  * Redistribution and use in source and binary forms, with or without
  11  * modification, are permitted provided that the following conditions
  12  * are met:
  13  * 1. Redistributions of source code must retain the above copyright
  14  *    notice, this list of conditions and the following disclaimer.
  15  * 2. Redistributions in binary form must reproduce the above copyright
  16  *    notice, this list of conditions and the following disclaimer in the
  17  *    documentation and/or other materials provided with the distribution.
  18  *
  19  * THIS SOFTWARE IS PROVIDED BY THE NETBSD FOUNDATION, INC. AND CONTRIBUTORS
  20  * ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED
  21  * TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
  22  * PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS
  23  * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
  24  * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
  25  * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
  26  * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
  27  * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
  28  * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
  29  * POSSIBILITY OF SUCH DAMAGE.
  30  */
  31
  32
  33 #include <sys/types.h>
  34
  35 #include "memswitch.h"
  36 #include "methods.h"
  37
  38
  39 /*
  40  * XXX: gcc extension is used.
  41  */
  42 struct property properties[] = {
  43         {
  44                 "special", "magic1",
  45                 0, 4, 0, {longword:0}, 0, {longword:0}, {longword:MAGIC1},
  46                 parse_dummy, 0, 0,
  47                 print_magic,
  48                 fill_ulong, flush_ulong,
  49                 " Magic.  Must be 0x82773638\n"
  50         },
  51         {
  52                 "special", "magic2",
  53                 4, 4, 0, {longword:0}, 0, {longword:0}, {longword:MAGIC2},
  54                 parse_dummy, 0, 0,
  55                 print_magic,
  56                 fill_ulong, flush_ulong,
  57                 " Magic.  Must be 0x30303057\n"
  58         },
  59         {
  60                 "alarm", "bootmode",
  61                 30, 4, 0, {longword:0}, 0, {longword:0}, {longword:0},
  62                 parse_ulong, 0, 0xff0000,
  63                 print_ulongh,
  64                 fill_ulong, flush_ulong,
  65                 " What to do on RTC alarm boot.\n"
  66         },
  67         {
  68                 "alarm", "boottime",
  69                 34, 4, 0, {longword:0}, 0, {longword:0}, {longword:0xffff0000},
  70                 parse_ulong, 0, 0xffffffff,
  71                 print_ulongh,
  72                 fill_ulong, flush_ulong,
  73                 " Alarm.\n"
  74         },
  75         {
  76                 "alarm", "enabled",
  77                 38, 1, 0, {byte:{[0] 0}}, 0, {byte:{[0] 0}}, {byte:{[0] 0}},
  78                 parse_uchar, 0, 7,
  79                 print_uchar,
  80                 fill_uchar, flush_uchar,
  81                 " 0 to enable alarm, 7 to disable.\n"
  82         },
  83         {
  84                 "alarm", "timetodown",
  85                 20, 4, 0, {longword:0}, 0, {longword:0}, {longword:-1},
  86                 parse_time, -1, 0x7fffffff,
  87                 print_timesec,
  88                 fill_ulong, flush_ulong,
  89                 " When boot on alarm, time to shutdown is stored in second.\n"
  90                 " Can be specified in minite with suffix minute.\n"
  91         },
  92         {
  93                 "boot", "device",
  94                 24, 2, 0, {word:{[0] 0}}, 0, {word:{[0] 0}}, {word:{[0] -1}},
  95                 parse_bootdev, 0, 0,
  96                 print_bootdev,
  97                 fill_ushort, flush_ushort,
  98                 " Boot device.\n"
  99                 " STD for standard, HDn for the nth harddisk,  FDn for the nth floppy drive,\n"
 100                 " ROM for the ROM firmware, RAM for the non-volatile SRAM,\n"
 101                 " INSCSIn for the SCSI device ID n which is attached to the built-in adaptor,\n"
 102                 " EXSCSIn for the SCSI device ID n which is attached to the external adaptor.\n"
 103         },
 104         {
 105                 "boot", "ramaddr",
 106                 16, 4, 0, {longword:0}, 0, {longword:0}, {longword:0xed0100},
 107                 parse_ulong, 0xed0000, 0xed3fff,
 108                 print_ulongh,
 109                 fill_ulong, flush_ulong,
 110                 " If boot.device specifies to boot from RAM, the start address is stored.\n"
 111         },
 112         {
 113                 "boot", "romaddr",
 114                 12, 4, 0, {longword:0}, 0, {longword:0}, {longword:0xbffffc},
 115                 parse_ulong, 0xe80000, 0xffffff,
 116                 print_ulongh,
 117                 fill_ulong, flush_ulong,
 118                 " If boot.device specifies to boot from ROM, the start address is stored.\n"
 119         },
 120         {
 121                 "display", "contrast",
 122                 40, 1, 0, {byte:{[0] 0}}, 0, {byte:{[0] 0}}, {byte:{[0] 14}},
 123                 parse_uchar, 0, 1,
 124                 print_uchar,
 125                 fill_uchar, flush_uchar,
 126                 " Display contrast (0-15).\n"
 127         },
 128         {
 129                 "display", "dentakufont",
 130                 44, 1, 0, {byte:{[0] 0}}, 0, {byte:{[0] 0}}, {byte:{[0] 0}},
 131                 parse_uchar, 0, 1,
 132                 print_uchar,
 133                 fill_uchar, flush_uchar,
 134                 " In-line calculator font.  0 for LCD-like, 1 for normal.\n"
 135                 " Note on NetBSD in-line calculator is not supported.\n"
 136         },
 137         {
 138                 "display", "glyphmode",
 139                 89, 1, 0, {byte:{[0] 0}}, 0, {byte:{[0] 0}}, {byte:{[0] 0}},
 140                 parse_uchar, 0, 0x7,
 141                 print_ucharh,
 142                 fill_uchar, flush_uchar,
 143                 " Glyph mode for ASCII/JIS ROMAN characters (bitmap).\n"
 144                 " Bit 0 (LSB) is for codepoint 0x5c (\\), bit 1 for 0x7e (~),\n"
 145                 " bit 2 for 0x7c (|).\n"
 146                 " 0 for JIS ROMAN, 1 for ASCII.\n"
 147         },
 148         {
 149                 "display", "resolution",
 150                 29, 1, 0, {byte:{[0] 0}}, 0, {byte:{[0] 0}}, {byte:{[0] 16}},
 151                 parse_uchar, 0, 18,
 152                 print_ucharh,
 153                 fill_uchar, flush_uchar,
 154                 " Initial display resolution.\n"
 155         },
 156         {
 157                 "display", "tcolor0",
 158                 46, 2, 0, {word:{[0] 0}}, 0, {word:{[0] 0}}, {word:{[0] 0}},
 159                 parse_ushort, 0, 0xffff,
 160                 print_ushorth,
 161                 fill_ushort, flush_ushort,
 162                 " Initial RGB value for color cell #0.\n"
 163                 " Note on NetBSD the value is ignored.\n"
 164         },
 165         {
 166                 "display", "tcolor1",
 167                 48, 2, 0, {word:{[0] 0}}, 0, {word:{[0] 0}}, {word:{[0] 0xf83e}},
 168                 parse_ushort, 0, 0xffff,
 169                 print_ushorth,
 170                 fill_ushort, flush_ushort,
 171                 " Initial RGB value for color cell #1.\n"
 172                 " Note on NetBSD the value is ignored.\n"
 173         },
 174         {
 175                 "display", "tcolor2",
 176                 50, 2, 0, {word:{[0] 0}}, 0, {word:{[0] 0}}, {word:{[0] 0xffc0}},
 177                 parse_ushort, 0, 0xffff,
 178                 print_ushorth,
 179                 fill_ushort, flush_ushort,
 180                 " Initial RGB value for color cell #2.\n"
 181                 " Note on NetBSD the value is ignored.\n"
 182         },
 183         {
 184                 "display", "tcolor3",
 185                 52, 2, 0, {word:{[0] 0}}, 0, {word:{[0] 0}}, {word:{[0] 0xfffe}},
 186                 parse_ushort, 0, 0xffff,
 187                 print_ushorth,
 188                 fill_ushort, flush_ushort,
 189                 " Initial RGB value for color cell #3.\n"
 190                 " Note on NetBSD the value is ignored.\n"
 191         },
 192         {
 193                 "display", "tcolor47",
 194                 54, 2, 0, {word:{[0] 0}}, 0, {word:{[0] 0}}, {word:{[0] 0xde6c}},
 195                 parse_ushort, 0, 0xffff,
 196                 print_ushorth,
 197                 fill_ushort, flush_ushort,
 198                 " Initial RGB value for color cell #4-7.\n"
 199                 " Note on NetBSD the value is ignored.\n"
 200         },
 201         {
 202                 "display", "tcolor8f",
 203                 56, 2, 0, {word:{[0] 0}}, 0, {word:{[0] 0}}, {word:{[0] 0}},
 204                 parse_ushort, 0, 0xffff,
 205                 print_ushorth,
 206                 fill_ushort, flush_ushort,
 207                 " Initial RGB value for color cell #8-15.\n"
 208                 " Note on NetBSD the value is ignored.\n"
 209         },
 210         {
 211                 "hw", "harddrive",
 212                 90, 1, 0, {byte:{[0] 0}}, 0, {byte:{[0] 0}}, {byte:{[0] 0}},
 213                 parse_uchar, 0, 15,
 214                 print_ucharh,
 215                 fill_uchar, flush_uchar,
 216                 " Number of old, SASI-compatible hard disks connected.\n"
 217                 " Note they are not supported on NetBSD.\n"
 218         },
 219         {
 220                 "hw", "memory",
 221                 8, 4, 0, {longword:0}, 0, {longword:0}, {longword:1024*1024},
 222                 parse_byte, 1024*1024, 12*1024*1024,
 223                 print_ulongh,
 224                 fill_ulong, flush_ulong,
 225                 " Memory size in byte.\n"
 226                 " Can be specified by Kilobyte and Megabyte with suffix KB and MB respectively.\n"
 227         },
 228         {
 229                 "hw", "serial",
 230                 26, 2, 0, {word:{[0] 0}}, 0, {word:{[0] 0}}, {word:{[0] 0x4e07}},
 231                 parse_serial, 0, 0,
 232                 print_serial,
 233                 fill_ushort, flush_ushort,
 234                 " Serial mode.\n"
 235                 " Consist of comma-separated 5 specs.  The first value means speed in bps,\n"
 236                 " second means the bit width (5-8), third means parity (n for non parity,\n"
 237                 " o for odd parity, e for even parity), fourth means stop bit (2, 1 or 1.5),\n"
 238                 " fifth for software flow control (`-' or `s').\n"
 239                 " Note that the value is ignored on NetBSD.\n"
 240         },
 241         {
 242                 "hw", "srammode",
 243                 45, 1, 0, {byte:{[0] 0}}, 0, {byte:{[0] 0}}, {byte:{[0] 0}},
 244                 parse_srammode, 0, 1,
 245                 print_srammode,
 246                 fill_uchar, flush_uchar,
 247                 " Usage of the user area of non-volatile static RAM.\n"
 248                 " 0 for unused, 1 for SRAMDISK, 2 for user program.\n"
 249         },
 250         {
 251                 "hw", "upcount",
 252                 84, 4, 0, {longword:0}, 0, {longword:0}, {longword:0},
 253                 parse_dummy, 0, 0xffffffff,
 254                 print_ulong,
 255                 fill_ulong, flush_dummy,
 256                 " Boot count since the SRAM is initialized.\n"
 257         },
 258         {
 259                 "hw", "uptime",
 260                 76, 4, 0, {longword:0}, 0, {longword:0}, {longword:0},
 261                 parse_dummy, 0, 0xffffffff,
 262                 print_ulong,
 263                 fill_ulong, flush_dummy,
 264                 " Total uptime since the SRAM is initialized.\n"
 265         },
 266         {
 267                 "keyboard", "delay",
 268                 58, 1, 0, {byte:{[0] 0}}, 0, {byte:{[0] 0}}, {byte:{[0] 3}},
 269                 parse_uchar, 0, 0xff,
 270                 print_uchar,
 271                 fill_uchar, flush_uchar,
 272                 " Delay for start keyboard autorepeat. (200+100*n) ms.\n"
 273         },
 274         {
 275                 "keyboard", "kanalayout",
 276                 43,  1, 0, {byte:{[0] 0}}, 0, {byte:{[0] 0}}, {byte:{[0] 0}},
 277                 parse_uchar, 0, 1,
 278                 print_uchar,
 279                 fill_uchar, flush_uchar,
 280                 " Layout of kana keys.  0 for JIS, 1 for AIUEO order.\n"
 281                 " Note on NetBSD kana input is not supported.\n"
 282         },
 283         {
 284                 "keyboard", "ledstat",
 285                 28, 1, 0, {byte:{[0] 0}}, 0, {byte:{[0] 0}}, {byte:{[0] 0}},
 286                 parse_uchar, 0, 0x7f,
 287                 print_uchar,
 288                 fill_uchar, flush_uchar,
 289                 " Initial keyboard LED status (bitmap).\n"
 290                 " Each bit means KANA, ROMAJI, CODE, CAPS, INS, HIRAGANA, ZENKAKU from LSB.\n"
 291         },
 292         {
 293                 "keyboard", "opt2",
 294                 39, 1, 0, {byte:{[0] 0}}, 0, {byte:{[0] 0}}, {byte:{[0] 0}},
 295                 parse_uchar, 0, 1,
 296                 print_uchar,
 297                 fill_uchar, flush_uchar,
 298                 " 1 for normal, 0 for TV control.\n"
 299         },
 300         {
 301                 "keyboard", "repeat",
 302                 59, 1, 0, {byte:{[0] 0}}, 0, {byte:{[0] 0}}, {byte:{[0] 3}},
 303                 parse_uchar, 0, 0xff,
 304                 print_uchar,
 305                 fill_uchar, flush_uchar,
 306                 " Time elapsed between the keyboard autorepeat. (30+5*n^2 ms.\n"
 307         },
 308         {
 309                 "poweroff", "ejectfloppy",
 310                 41, 1, 0, {byte:{[0] 0}}, 0, {byte:{[0] 0}}, {byte:{[0] 0}},
 311                 parse_uchar, 0, 1,
 312                 print_uchar,
 313                 fill_uchar, flush_uchar,
 314                 " 1 to eject floppy disks at shutdown.\n"
 315         },
 316         {
 317                 "poweroff", "tvctrl",
 318                 42,  1, 0, {byte:{[0] 0}}, 0, {byte:{[0] 0}}, {byte:{[0] 13}},
 319                 parse_uchar, 0, 0xff,
 320                 print_uchar,
 321                 fill_uchar, flush_uchar,
 322                 " What to do at shutdown for display TV.\n"
 323         },
 324         {
 325                 "printer", "timeout",
 326                 60, 4, 0, {longword:0}, 0, {longword:0}, {longword:0x80000},
 327                 parse_ulong, 0, 0xffffffff,
 328                 print_ulong,
 329                 fill_ulong, flush_ulong,
 330                 " Printer timeout in second.\n"
 331         },
 332 };
 333
 334 int number_of_props = sizeof (properties) / sizeof (struct property);