dist/ntp/include/icom.h

   1 /*      $NetBSD$        */
   2
   3 /*
   4  * Header file for ICOM radios
   5  */
   6 #include "ntp_types.h"
   7
   8 /*
   9  * Common definitions
  10  */
  11 #define P_ERMSG 0x1             /* trace bus error messages */
  12 #define P_TRACE 0x2             /* trace CI-V messges */
  13 #define RETRY   3               /* max packet retries */
  14 #define IBAUD   B1200           /* autotune port speed */
  15
  16 /*
  17  * Radio identifier codes
  18  */
  19 #define IC1271  0x24
  20 #define IC1275  0x18
  21 #define IC271   0x20
  22 #define IC275   0x10
  23 #define IC375   0x12
  24 #define IC471   0x22
  25 #define IC475   0x14
  26 #define IC575   0x16
  27 #define IC725   0x28
  28 #define IC726   0x30
  29 #define IC735   0x04
  30 #define IC751   0x1c
  31 #define IC761   0x1e
  32 #define IC765   0x2c
  33 #define IC775   0x46
  34 #define IC781   0x26
  35 #define IC970   0x2e
  36 #define R7000   0x08
  37 #define R71     0x1a
  38 #define R7100   0x34
  39 #define R72     0x32
  40 #define R8500   0x4a
  41 #define R9000   0x2a
  42
  43 /*
  44  * CI-V frame codes
  45  */
  46 #define PR      0xfe            /* preamble */
  47 #define TX      0xe0            /* controller address */
  48 #define FI      0xfd            /* end of message */
  49 #define ACK     0xfb            /* controller normal reply */
  50 #define NAK     0xfa            /* controller error reply */
  51 #define PAD     0xff            /* transmit padding */
  52
  53 /*
  54  * CI-V controller commands
  55  */
  56 #define V_FREQT 0x00            /* freq set (transceive) */
  57 #define V_MODET 0x01            /* set mode (transceive) */
  58 #define V_RBAND 0x02            /* read band edge */
  59 #define V_RFREQ 0x03            /* read frequency */
  60 #define V_RMODE 0x04            /* read mode */
  61 #define V_SFREQ 0x05            /* set frequency */
  62 #define V_SMODE 0x06            /* set mode */
  63 #define V_SVFO  0x07            /* select vfo */
  64 #define V_SMEM  0x08            /* select channel/bank */
  65 #define V_WRITE 0x09            /* write channel */
  66 #define V_VFOM  0x0a            /* memory -> vfo */
  67 #define V_CLEAR 0x0b            /* clear channel */
  68 #define V_ROFFS 0x0c            /* read tx offset */
  69 #define V_SOFFS 0x0d            /* write tx offset */
  70 #define V_SCAN  0x0e            /* scan control */
  71 #define V_SPLIT 0x0f            /* split control */
  72 #define V_DIAL  0x10            /* set dial tuning step */
  73 #define V_ATTEN 0x11            /* set attenuator */
  74 #define V_SANT  0x12            /* select antenna */
  75 #define V_ANNC  0x13            /* announce control */
  76 #define V_WRCTL 0x14            /* write controls */
  77 #define V_RDCTL 0x15            /* read controls */
  78 #define V_TOGL  0x16            /* set switches */
  79 #define V_ASCII 0x17            /* send CW message */
  80 #define V_POWER 0x18            /* power control */
  81 #define V_RDID  0x19            /* read model ID */
  82 #define V_SETW  0x1a            /* read/write channel/bank data */
  83 #define V_CTRL  0x7f            /* miscellaneous control */
  84
  85 /*
  86  * Function prototypes
  87  */
  88 int     icom_init               P((char *, int, int));
  89 int     icom_freq               P((int, int, double));