1 # $NetBSD: EB7500ATX,v 1.38 2009/09/22 14:49:46 tsutsui Exp $
3 # EB7500ATX --- NetBSD/acorn32 complete configuration
5 # This machine description file is used to generate the default NetBSD
6 # kernel. This generic kernel does not include all options, subsystems
7 # and device drivers, but should be useful for most applications.
9 # The machine description file can be customised for your specific
10 # machine to reduce the kernel size and improve its performance.
12 # For further information on compiling NetBSD kernels, see the config(8)
15 # For further information on hardware support for this architecture, see
16 # the intro(4) man page. For further information about kernel options
17 # for this architecture, see the options(4) man page. For an explanation
18 # of each device driver in this file see the section 4 man page for the
21 include "arch/acorn32/conf/std.acorn32"
23 options INCLUDE_CONFIG_FILE # embed config file in kernel binary
25 #ident "EB7500ATX-$Revision: 1.39 $"
27 # estimated number of users
30 # Standard system options
32 options RTC_OFFSET=0 # hardware clock is this many mins. west of GMT
33 #options NTP # NTP phase/frequency locked loop
36 options CPU_ARM7 # Support the ARM7 core
39 #options ARMFPE # ARM Ltd FPE
41 options EB7500ATX # Define in case needed
46 #file-system LFS # log-structured file system
47 file-system MFS # memory file system
48 file-system NFS # Network file system
49 file-system ADOSFS # AmigaDOS-compatible file system
50 file-system EXT2FS # second extended file system (linux)
51 file-system CD9660 # ISO 9660 + Rock Ridge file system
52 file-system MSDOSFS # MS-DOS file system
53 file-system FDESC # /dev/fd
54 file-system FILECORE # Acorn filecore file system
55 file-system KERNFS # /kern
56 file-system NULLFS # loopback file system
57 file-system OVERLAY # overlay filesystem
58 file-system PUFFS # Userspace file systems (e.g. ntfs-3g & sshfs)
59 file-system PROCFS # /proc
60 file-system UMAPFS # NULLFS + uid and gid remapping
61 file-system UNION # union file system
62 file-system PTYFS # /dev/pts/N support
65 options QUOTA # UFS quotas
66 #options FFS_EI # FFS Endian Independant support
67 options WAPBL # File system journaling support - Experimental
69 #options FFS_NO_SNAPSHOT # No FFS snapshot support
73 options GATEWAY # packet forwarding
74 options INET # IP + ICMP + TCP + UDP
76 #options IPSEC # IP security
77 #options IPSEC_ESP # IP security (encryption part; define w/IPSEC)
78 #options IPSEC_NAT_T # IPsec NAT traversal (NAT-T)
79 #options IPSEC_DEBUG # debug for IP security
80 #options MROUTING # IP multicast routing
81 #options PIM # Protocol Independent Multicast
82 options ISO,TPIP # OSI
83 #options EON # OSI tunneling over IP
84 options NETATALK # AppleTalk networking
85 options PFIL_HOOKS # pfil(9) packet filter hooks
86 options PPP_BSDCOMP # BSD-Compress compression support for PPP
87 options PPP_DEFLATE # Deflate compression support for PPP
88 options PPP_FILTER # Active filter support for PPP (requires bpf)
89 #options TCP_DEBUG # Record last TCP_NDEBUG packets with SO_DEBUG
91 #options ALTQ # Manipulate network interfaces' output queues
92 #options ALTQ_BLUE # Stochastic Fair Blue
93 #options ALTQ_CBQ # Class-Based Queueing
94 #options ALTQ_CDNR # Diffserv Traffic Conditioner
95 #options ALTQ_FIFOQ # First-In First-Out Queue
96 #options ALTQ_FLOWVALVE # RED/flow-valve (red-penalty-box)
97 #options ALTQ_HFSC # Hierarchical Fair Service Curve
98 #options ALTQ_LOCALQ # Local queueing discipline
99 #options ALTQ_PRIQ # Priority Queueing
100 #options ALTQ_RED # Random Early Detection
101 #options ALTQ_RIO # RED with IN/OUT
102 #options ALTQ_WFQ # Weighted Fair Queueing
104 # Compatibility options
106 options COMPAT_43 # 4.3BSD compatibility.
107 options COMPAT_40 # NetBSD 4.0 compatibility.
108 options COMPAT_30 # NetBSD 3.0 compatibility.
109 options COMPAT_20 # NetBSD 2.0 compatibility.
110 options COMPAT_16 # NetBSD 1.6 compatibility.
111 options COMPAT_15 # NetBSD 1.5 compatibility.
112 options COMPAT_14 # NetBSD 1.4 compatibility.
113 options COMPAT_13 # NetBSD 1.3 compatibility.
114 options COMPAT_12 # NetBSD 1.2 compatibility.
115 #options COMPAT_11 # NetBSD 1.1 compatibility.
116 #options COMPAT_10 # NetBSD 1.0 compatibility.
117 #options COMPAT_09 # NetBSD 0.9 compatibility.
118 #options TCP_COMPAT_42 # 4.2BSD TCP/IP bug compat. Not recommended.
119 options COMPAT_BSDPTY # /dev/[pt]ty?? ptys.
121 # Shared memory options
123 options SYSVMSG # System V-like message queues
124 options SYSVSEM # System V-like semaphores
125 #options SEMMNI=10 # number of semaphore identifiers
126 #options SEMMNS=60 # number of semaphores in system
127 #options SEMUME=10 # max number of undo entries per process
128 #options SEMMNU=30 # number of undo structures in system
129 options SYSVSHM # System V-like memory sharing
130 options P1003_1B_SEMAPHORE # p1003.1b semaphore support
134 options MEMORY_DISK_HOOKS # boottime setup of ramdisk
135 #options MEMORY_DISK_ROOT_SIZE=4100 # Size in blocks
136 #options MEMORY_DISK_IS_ROOT # use memory disk as root
138 # Miscellaneous kernel options
139 options KTRACE # system call tracing, a la ktrace(1)
140 options IRQSTATS # manage IRQ statistics
141 options KMEMSTATS # kernel memory statistics
142 #options SCSIVERBOSE # Verbose SCSI errors
143 options USERCONF # userconf(4) support
144 #options PIPE_SOCKETPAIR # smaller, but slower pipe(2)
145 #options SYSCTL_INCLUDE_DESCR # Include sysctl descriptions in kernel
146 options SYMTAB_SPACE=262144
148 # Enable experimental buffer queue strategy for better responsiveness under
149 # high disk I/O load. Use it with caution - it's not proven to be stable yet.
150 #options BUFQ_READPRIO
151 #options BUFQ_PRIOCSCAN
153 # Development and Debugging options
155 #options ARM700BUGTRACK # track the ARM700 swi bug
156 #options PORTMASTER # Enable PortMaster only options
157 options DIAGNOSTIC # internal consistency checks
158 #options PMAP_DEBUG # Enable pmap_debug_level code
159 options DDB # in-kernel debugger
160 #options DDB_HISTORY_SIZE=100 # Enable history editing in DDB
161 #makeoptions DEBUG="-g" # compile full symbol table
163 config netbsd root on ? type ?
164 options NFS_BOOT_DHCP
166 # serial console ... the conaddr is hardcoded as the pioc address + 4*com offset
167 # this really be fixed some day
168 #options COMCONSOLE,CONADDR="0x210000+4*0x3f8",CONUNIT=0,CONSPEED=9600
170 # The main bus device
179 # system clock via IOMD
186 # RTC device via IIC bus
187 #pcfrtc* at iic? addr 0x50
193 # ws console uses DUMB, SUN or VT100 terminal emulation
194 #options WSEMUL_NODUMB
198 #options WSDISPLAY_COMPAT_RAWKBD
200 #options FONT_BOLD8x16
201 #options FONT_GALLANT12x22 # Very nice font
202 #options FONT_LUCIDA16x29
203 #options FONT_OMRON12x20 # looks funny
204 #options FONT_QVSS8x15 # broken ?
205 options FONT_SONY12x25 # looks like VT220 font
206 options FONT_SONY8x16 # not tested
207 #options FONT_VT220L8x8 # 8x8 font as in Arch. cons
208 #options FONT_VT220L8x16 # 8x(2x8) font as in Arch. cons
209 #options FONT_VT220L8x10 # not tested
210 #options FONT_VT220L8x20 # not tested
212 vidcvideo0 at vidc? # wscons driver for VIDC
213 wsdisplay* at vidcvideo? console ? # display itself
215 iomdkbc* at iomd? # IOMD keyboard/mouse interface
217 pckbd* at iomdkbc? slot ? # PS/2 keyboard
218 options PCKBD_LAYOUT=KB_UK
221 pms* at iomdkbc? slot ? # PS/2 mouse
224 #qms* at iomd? # ws quadmouse driver
225 #wsmouse* at qms? # wsmouse on ws quadmouse
235 wdc* at rsbus? # eb7500atx build in ide
237 wd* at atabus? drive ?
240 # Builtin cs8920M Network adaptor
243 # Builtin DS1687 clock
244 # Not functioning (yet)
245 #ds1687rtc* at rsbus?
247 pseudo-device loop # network loopback
248 pseudo-device bpfilter # packet filter
249 pseudo-device sl # CSLIP
250 pseudo-device ppp # PPP
251 pseudo-device pppoe # PPP over Ethernet (RFC 2516)
252 pseudo-device tun # network tunneling over tty
253 pseudo-device tap # virtual Ethernet
254 #pseudo-device gre # generic L3 over IP tunnel
255 #pseudo-device ipfilter # ip filter
256 pseudo-device gif # IPv[46] over IPv[46] tunnel (RFC1933)
257 #pseudo-device faith # IPv[46] tcp relay translation i/f
258 pseudo-device stf # 6to4 IPv6 over IPv4 encapsulation
259 #pseudo-device strip # STarmode Radio IP (Metricon Ricochet)
260 pseudo-device vlan # IEEE 802.1q encapsulation
261 pseudo-device bridge # simple inter-network bridging
262 #options BRIDGE_IPF # bridge uses IP/IPv6 pfil hooks too
263 pseudo-device pty # pseudo-terminals
264 pseudo-device vnd # disk-like interface to files
265 pseudo-device ccd 2 # concatenated disk devices
266 #pseudo-device cgd 4 # cryptographic disk devices
267 pseudo-device raid 8 # RAIDframe disk driver
268 options RAID_AUTOCONFIG # auto-configuration of RAID components
269 # Options to enable various other RAIDframe RAID types.
270 # options RF_INCLUDE_EVENODD=1
271 # options RF_INCLUDE_RAID5_RS=1
272 # options RF_INCLUDE_PARITYLOGGING=1
273 # options RF_INCLUDE_CHAINDECLUSTER=1
274 # options RF_INCLUDE_INTERDECLUSTER=1
275 # options RF_INCLUDE_PARITY_DECLUSTERING=1
276 # options RF_INCLUDE_PARITY_DECLUSTERING_DS=1
277 #pseudo-device fss 4 # file system snapshot device
278 pseudo-device md 1 # Ramdisk driver
279 pseudo-device rnd # /dev/random and in-kernel generator
280 pseudo-device clockctl # user control of clock subsystem
281 pseudo-device ksyms # /dev/ksyms
282 #pseudo-device pf # PF packet filter
283 #pseudo-device pflog # PF log if
284 pseudo-device putter # for puffs and pud
286 # If the standard modes don't work for your monitor, you can specify
287 # a RISC-OS-format monitor definition file and a list of modes here.
289 #makeoptions MONITOR="Taxan875+LR"
290 #makeoptions MONITOR="AKF60"
291 #makeoptions MODES="1024,768,60 1024,768,70 800,600,60 640,480,60 1280,1024 1152,900"