1 .\" $NetBSD: hardware,v 1.21 2003/07/26 17:06:55 salo Exp $
4 \*V runs on the TT030, Falcon, Hades and MilanI machines.
5 An FPU is not required.
6 The minimum amount of RAM required is 4 MB.
7 On the Hades, only the Tseng PCI
8 VGA cards (ET4000/ET6000/ET6100) are supported in the \*V release.
9 When an unsupported video card is present, you can use
11 with a serial console only.
13 A minimal installation requires around 100MB of disk space, plus a swap
14 partition size of 2*RAM (and always greater than 20MB).
15 You will probably want to compile your own kernel, as
17 is large and bulky in order to accommodate all people,
19 is small and might not have all the features you want).
21 .Ss2 Supported devices
22 .(bullet -offset indent
23 The builtin SCSI host adapter
25 Should support most SCSI-drives.
27 Should support most tape drives.
29 Should support most CD-ROM drives.
31 Should support most ZIP/M-O drives.
34 The builtin video controller
36 The builtin (720 KB / 1.44 MB) floppy drive
38 The serial2/modem2 ports
40 The Falcon FX memory expansion
44 A 3-button mouse (see build description in the FAQ!)
48 IDE interface on both Falcon and Hades (includes ATAPI support)
50 The serial interface on the first 68901 UART (modem1)
52 VME-bus devices (TT030/Hades)
56 Circad Leonardo 24-bit VME graphics adapter
58 Crazy Dots VME et4000 graphics adapter
60 Riebl (and possibly PAM) ethernet cards on the VME bus.
63 PCI-bus devices (Hades and Milan only)
65 ET4000/ET6000/ET6100-PCI (VGA console)
67 ESS Technology Inc. Solo-1 Soundcard
69 3Com 3c59x Network card
72 ISA-bus devices (Hades only)
74 Teles S0/16.3-ISA ISDN adapter (with I4B)
78 This list is incomplete by definition.
79 We can not test all SCSI peripherals, ISA cards or PCI cards.
80 If you have problems with such peripherals, please contact the
81 .Mt port-\*M@NetBSD.org