1 .\"$NetBSD: hardware,v 1.5 2004/02/13 10:00:55 wiz Exp $
5 requires the use of Motorola's
7 ROM to load over a serial port.
8 This means that there is no way to boot from a local disk or PCI device.
10 .Ss2 Supported processor cards
11 .(bullet -offset indent
14 Altimus X3 with either MPC755 or MPC7410
17 Other PMCs should work, but may need minor adjustments or more
18 substantial work to support additional functionality.
20 .Ss2 Supported devices
21 .(bullet -offset indent
24 Asante Mac 10/100 PCI Rev A, part number 09-00169-01
27 Farallon Fast EtherTX 10/100, part number PN996L-TX
30 SMC Etherpower II (9432TX)
39 Intel EtherExpress PRO/10+ PCI LAN Adapter
45 VIA Technologies VT86C926
63 Many other PCI Ethernet interfaces, such as
65 .Pq Em de No and Em tlp ,
80 Adaptec PCI controllers 291x, 2920, 2930C, 294x, 295x, 39xx, 19160, 29160
84 AdvanSys ABP-940UW[68], ABP-970UW[68], ASB3940UW-00 SCSI host adapters
87 AdvanSys 1200[A,B], 9xx[U,UA] SCSI controller
93 DPT SmartCache/SmartRAID
97 .Pq Em siop No or Em esiop
99 Many other PCI SCSI controllers should work, but no one has tried them
101 Most SCSI disk/tape/CD-ROM devices should work
109 Some other PCI IDE controllers should work, although no one has had much success
111 Most IDE disk/CD-ROM/ATAPI devices should work
116 PCI audio cards, although none have been tested.
121 On-board serial ports (the modem and printer ports)
122 .Pq Em com0 No and Em com1
124 Some PCI serial ports should work, but no one has tried them
129 Most MI PCI cards should work, although very few have been tested with
131 .Lk http://www.NetBSD.org/support/hardware/pci.html
135 .Ss2 Unsupported devices
136 .(bullet -offset indent
137 Built-in PS/2 keyboard & mouse
146 .Ss2 Supported boot devices and media
148 Currently, the only way to boot the system is with the DINK32 ROM
149 monitor's serial download or a JTAG device.