1 .\" $NetBSD: hardware,v 1.9 2004/08/09 08:44:10 ragge Exp $
3 .Ss2 Supported hardware
4 .(bullet -offset indent
11 VAX 4000 model 100(A),105A,106A,108,200,300,400,500(A),505A,600(A),700
13 VAX 8200/8250/8300/8350
17 MicroVAX/VAXstation II
21 MicroVAX 3100 model 10,10e,20,20e,30,40,80,85,90,95
29 MicroVAX 2000/VAXstation 2000
31 VAXstation 3100 model 30,38,40,48,76
33 VAXserver 3100 KA41-B and KA41-E
41 VAXstation 4000 models 60,90,90A,96 and VLC
46 DEUNA/DELUA Unibus ethernet
48 DEQNA/DELQA Q22 bus ethernet
50 LANCE chip (where available)
52 SGEC chip (where available)
57 DHU11/DHV11/DL11/DLV11/DZ11/DZQ11/DZV11 Unibus/Q22 bus asynchronous
60 DZ11-compatible lines on VAXstations.
65 UDA50 Unibus MSCP controller
67 KDA50/RQDX1/2/3 Q22 bus
71 KDB50 BI-bus MSCP controller
73 MFM and SCSI controllers on VAXstations
75 RP04/05/06/07 and RM02/03/05/80 Massbus disks
77 Console RL02 on VAX 8600.
80 Some third-party controllers are also known to work, others do not.
84 TMSCP on Q22 bus (TK50/70, TU81)
88 SCSI tapes on VAXstations.
93 RX33/RX50 on RQDX controllers
99 The minimal configuration requires 2 MB of RAM and ~40 MB of disk space,
100 but the installation really requires 6 MB RAM unless you plan on
103 Here is a table of recommended HD partition sizes for a full install:
105 .Bl -column -offset indent Partition Suggested Needed
106 .It Partition Ta Suggested Ta Needed
107 .It /\ (root) Ta "32 MB" Ta "16 MB"
108 .It /usr Ta "110 MB" Ta "45 MB"
109 .It /var Ta "20 MB" Ta "5 MB"
110 .It swap Ta Em 2-3 *RAM
112 .(item -offset indent
113 Anything else is up to you!