distrib/sets/maketars

   1 #!/bin/sh
   2 #
   3 # $NetBSD$
   4 #
   5 # Make release tar files for some or all lists.  Usage:
   6 # maketars [-b] [-x] [-i installdir] [-a arch] [-m machine] [-s setsdir]
   7 #       [-M metalog] [-N etcdir] [-d destdir] [-t tardir] [setname ...]
   8 #
   9 # The default sets are "base comp etc games man misc tests text"
  10 # The X sets are "xbase xcomp xetc xfont xserver"
  11 # The extsrc sets are "extbase extcomp extetc"
  12 #
  13 # If '-i installdir' is given, copy the given sets to installdir
  14 # (using pax -rw ...) instead of creating tar files.
  15 # In this case, remove "etc", "xetc", and "extetc" from the list of default sets.
  16 #
  17
  18 prog="${0##*/}"
  19 rundir="$(dirname "$0")" # ${0%/*} isn't good enough when there's no "/"
  20 . "${rundir}/sets.subr"
  21
  22 # set defaults
  23 lists=
  24 tars="${RELEASEDIR}"
  25 dest="${DESTDIR}"
  26 metalog=
  27 installdir=
  28 etcdir=
  29 setfilesonly=false
  30 quiet=false
  31
  32 usage()
  33 {
  34         cat 1>&2 <<USAGE
  35 Usage: ${prog} [-L base,x,ext] [-b] [-x] [-y] [-i idir] [-a arch] [-m machine] [-s setsdir] [-S]
  36             [-M metalog] [-N etcdir] [-d dest] [-t targetdir] [setname ...]
  37         -L base,x,ext   Make specified lists
  38         -b              Make both netbsd and x11 lists
  39         -x              Only make x11 lists
  40                 [Default: make netbsd lists]
  41         -y              Only make extsrc lists
  42                 [Default: make netbsd lists]
  43         -i idir         Install sets to idir instead of creating tar files
  44         -a arch         Set arch (e.g, m68k, mipseb, mipsel, powerpc) [${MACHINE_ARCH}]
  45         -m machine      Set machine (e.g, amiga, i386, macppc) [${MACHINE}]
  46         -q              Quiet operation
  47         -s setsdir      Directory to find sets [${setsdir}]
  48         -S              Exit after creating set files ${dest}/etc/mtree/set.*
  49         -M metalog      metalog file
  50         -N etcdir       etc dir for metalog use [${dest}/etc]
  51         -d dest         \${DESTDIR}     [${dest}]
  52         -t targetdir    \${RELEASEDIR}  [${tars}]
  53         [setname ...]   Sets to build   [${lists}]
  54 USAGE
  55         exit 1
  56 }
  57
  58 msg()
  59 {
  60         $quiet || echo $*
  61 }
  62
  63 # handle args
  64 while getopts L:bxyi:a:m:qs:SM:N:d:t: ch; do
  65         case ${ch} in
  66         L)
  67                 save_IFS="${IFS}"
  68                 IFS=,
  69                 for _list in ${OPTARG}; do
  70                         case $_list in
  71                         base)   lists="${lists} ${nlists}" ;;
  72                         x)      lists="${lists} ${xlists}" ;;
  73                         ext)    lists="${lists} ${extlists}" ;;
  74                         esac
  75                 done
  76                 IFS="${save_IFS}"
  77                 ;;
  78         # backward compat
  79         b)
  80                 lists="${nlists} ${xlists}"
  81                 ;;
  82         x)
  83                 lists="${xlists}"
  84                 ;;
  85         y)
  86                 lists="${extlists}"
  87                 ;;
  88         i)
  89                 installdir="${OPTARG}"
  90                 ;;
  91         a)
  92                 MACHINE_ARCH="${OPTARG}"
  93                 MACHINE_CPU="$(arch_to_cpu "${OPTARG}")"
  94                 ;;
  95         m)
  96                 MACHINE="${OPTARG}"
  97                 ;;
  98         q)
  99                 quiet=true
 100                 ;;
 101         s)
 102                 setsdir="${OPTARG}"
 103                 ;;
 104         S)
 105                 setfilesonly=true
 106                 ;;
 107         M)
 108                 metalog="${OPTARG}"
 109                 ;;
 110         N)
 111                 etcdir="${OPTARG}"
 112                 ;;
 113         d)
 114                 dest="${OPTARG}"
 115                 ;;
 116         t)
 117                 tars="${OPTARG}"
 118                 ;;
 119         *)
 120                 usage
 121                 ;;
 122         esac
 123 done
 124 shift $((${OPTIND} - 1))
 125 if [ -n "${installdir}" ]; then # if -i, remove etc + xetc + extetc from the default list
 126         lists="$(echo ${lists} | ${SED} -e 's/ etc / /;s/ xetc / /;s/ extetc / /')"
 127 fi
 128 if [ -n "$*" ]; then
 129         lists="$*"
 130 fi
 131
 132 if [ -z "${tars}" -a -z "${installdir}" ]; then
 133         echo >&2 "${prog}: \${RELEASEDIR} must be set, or -i must be used"
 134         exit 1
 135 fi
 136
 137 if [ -z "${dest}" ]; then
 138         echo >&2 "${prog}: \${DESTDIR} must be set"
 139         exit 1
 140 fi
 141 : ${etcdir:="${dest}/etc"}
 142
 143 SDIR="$(${MKTEMP} -d "/tmp/${prog}.XXXXXX")"
 144 TMPFILES=
 145
 146 setlistdir="${dest}/etc/mtree"
 147
 148 cleanup()
 149 {
 150         es=$?
 151         /bin/rm -rf "${SDIR}" ${TMPFILES}
 152         trap - 0
 153         exit ${es}
 154 }
 155 trap cleanup 0 2 3 13           # EXIT INT QUIT PIPE
 156
 157 #
 158 # build the setfiles
 159 #
 160
 161 for setname in ${lists}; do
 162         ${HOST_SH} "${setsdir}/makeflist" -a "${MACHINE_ARCH}" -m "${MACHINE}" \
 163             -s "${setsdir}" "${setname}" > "${SDIR}/flist.${setname}" \
 164             || exit 1
 165         if [ ! -s "${SDIR}/flist.${setname}" ]; then
 166                 echo >&2 "makeflist output is empty for ${setname}"
 167                 exit 1
 168         fi
 169         if [ -n "${metalog}" ]; then
 170                 ${setfilesonly} && msg "Creating ${setlistdir}/set.${setname}"
 171                 ${AWK} -f "${rundir}/getdirs.awk" "${SDIR}/flist.${setname}" \
 172                     > "${SDIR}/flist.${setname}.full" \
 173                     || exit 1
 174                 (
 175                         echo "/set uname=root gname=wheel"
 176                         ${AWK} -f "${rundir}/join.awk" \
 177                                 "${SDIR}/flist.${setname}.full" "${metalog}"
 178                         echo "./etc/mtree/set.${setname} type=file mode=0444"
 179                 ) | ${MTREE} -CS -k all -R time -N "${etcdir}" \
 180                     > "${setlistdir}/set.${setname}" \
 181                     || exit 1
 182                 # We deliberately do not add set.${setname} to ${metalog},
 183                 # because we depend on it as an input.
 184         elif ! cmp -s "${SDIR}/flist.${setname}" \
 185                         "${setlistdir}/set.${setname}" >/dev/null 2>&1; then
 186                 rm -f "${setlistdir}/set.${setname}"
 187                 cp "${SDIR}/flist.${setname}" "${setlistdir}/set.${setname}" \
 188                     || exit 1
 189         fi
 190 done
 191 if ${setfilesonly}; then                # exit after creating the set lists
 192         exit 0
 193 fi
 194
 195 #
 196 # now build the tarfiles
 197 #
 198
 199 GZIP=-9n                # for pax -z
 200 export GZIP
 201 es=0
 202 for setname in ${lists:-${nlists}}; do
 203         out="${setname}.tgz"
 204         if [ -n "${installdir}" ]; then
 205                 msg "Copying set ${setname}"
 206                 ( cd "${dest}"; \
 207                     ${PAX} -O -rwpe -d -N"${etcdir}" ${metalog:+-M} \
 208                         "${installdir}" < "${setlistdir}/set.${setname}" )
 209         else
 210                 if [ -n "${metalog}" -a "${tars}/${out}" -nt "${metalog}" ]
 211                 then
 212                         msg "${out} is up to date"
 213                         continue
 214                 fi
 215                 msg "Creating ${out}"
 216                 rm -f "${tars}/${out}"
 217                 TMPFILES="${TMPFILES} ${tars}/${out}.tmp"
 218                 ( cd "${dest}"; \
 219                     ${PAX} -O -w -d -z -N"${etcdir}" ${metalog:+-M} \
 220                         < "${setlistdir}/set.${setname}" ) \
 221                         > "${tars}/${out}.tmp" &&
 222                 mv "${tars}/${out}.tmp" "${tars}/${out}"
 223         fi
 224         es=$((${es} + $?))
 225 done
 226 if [ ${es} -gt 255 ]; then
 227         es=255
 228 fi
 229 exit ${es}