include/arpa/telnet.h

   1 /*      $NetBSD: telnet.h,v 1.11 2005/02/19 21:57:19 christos Exp $     */
   2
   3 /*
   4  * Copyright (c) 1983, 1993
   5  *      The Regents of the University of California.  All rights reserved.
   6  *
   7  * Redistribution and use in source and binary forms, with or without
   8  * modification, are permitted provided that the following conditions
   9  * are met:
  10  * 1. Redistributions of source code must retain the above copyright
  11  *    notice, this list of conditions and the following disclaimer.
  12  * 2. Redistributions in binary form must reproduce the above copyright
  13  *    notice, this list of conditions and the following disclaimer in the
  14  *    documentation and/or other materials provided with the distribution.
  15  * 3. Neither the name of the University nor the names of its contributors
  16  *    may be used to endorse or promote products derived from this software
  17  *    without specific prior written permission.
  18  *
  19  * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
  20  * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
  21  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
  22  * ARE DISCLAIMED.  IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
  23  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
  24  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
  25  * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
  26  * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
  27  * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
  28  * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
  29  * SUCH DAMAGE.
  30  *
  31  *      @(#)telnet.h    8.2 (Berkeley) 12/15/93
  32  */
  33
  34 #ifndef _ARPA_TELNET_H_
  35 #define _ARPA_TELNET_H_
  36
  37 /*
  38  * Definitions for the TELNET protocol.
  39  */
  40 #define IAC     255             /* interpret as command: */
  41 #define DONT    254             /* you are not to use option */
  42 #define DO      253             /* please, you use option */
  43 #define WONT    252             /* I won't use option */
  44 #define WILL    251             /* I will use option */
  45 #define SB      250             /* interpret as subnegotiation */
  46 #define GA      249             /* you may reverse the line */
  47 #define EL      248             /* erase the current line */
  48 #define EC      247             /* erase the current character */
  49 #define AYT     246             /* are you there */
  50 #define AO      245             /* abort output--but let prog finish */
  51 #define IP      244             /* interrupt process--permanently */
  52 #define BREAK   243             /* break */
  53 #define DM      242             /* data mark--for connect. cleaning */
  54 #define NOP     241             /* nop */
  55 #define SE      240             /* end sub negotiation */
  56 #define EOR     239             /* end of record (transparent mode) */
  57 #define ABORT   238             /* Abort process */
  58 #define SUSP    237             /* Suspend process */
  59 #define xEOF    236             /* End of file: EOF is already used... */
  60
  61 #define SYNCH   242             /* for telfunc calls */
  62
  63 #ifdef TELCMDS
  64 const char *telcmds[] = {
  65         "EOF", "SUSP", "ABORT", "EOR",
  66         "SE", "NOP", "DMARK", "BRK", "IP", "AO", "AYT", "EC",
  67         "EL", "GA", "SB", "WILL", "WONT", "DO", "DONT", "IAC", 0
  68 };
  69 #else
  70 extern const char *telcmds[];
  71 #endif
  72
  73 #define TELCMD_FIRST    xEOF
  74 #define TELCMD_LAST     IAC
  75 #define TELCMD_OK(x)    ((unsigned int)(x) <= TELCMD_LAST && \
  76                          (unsigned int)(x) >= TELCMD_FIRST)
  77 #define TELCMD(x)       telcmds[(x)-TELCMD_FIRST]
  78
  79 /* telnet options */
  80 #define TELOPT_BINARY   0       /* 8-bit data path */
  81 #define TELOPT_ECHO     1       /* echo */
  82 #define TELOPT_RCP      2       /* prepare to reconnect */
  83 #define TELOPT_SGA      3       /* suppress go ahead */
  84 #define TELOPT_NAMS     4       /* approximate message size */
  85 #define TELOPT_STATUS   5       /* give status */
  86 #define TELOPT_TM       6       /* timing mark */
  87 #define TELOPT_RCTE     7       /* remote controlled transmission and echo */
  88 #define TELOPT_NAOL     8       /* negotiate about output line width */
  89 #define TELOPT_NAOP     9       /* negotiate about output page size */
  90 #define TELOPT_NAOCRD   10      /* negotiate about CR disposition */
  91 #define TELOPT_NAOHTS   11      /* negotiate about horizontal tabstops */
  92 #define TELOPT_NAOHTD   12      /* negotiate about horizontal tab disposition */
  93 #define TELOPT_NAOFFD   13      /* negotiate about formfeed disposition */
  94 #define TELOPT_NAOVTS   14      /* negotiate about vertical tab stops */
  95 #define TELOPT_NAOVTD   15      /* negotiate about vertical tab disposition */
  96 #define TELOPT_NAOLFD   16      /* negotiate about output LF disposition */
  97 #define TELOPT_XASCII   17      /* extended ascic character set */
  98 #define TELOPT_LOGOUT   18      /* force logout */
  99 #define TELOPT_BM       19      /* byte macro */
 100 #define TELOPT_DET      20      /* data entry terminal */
 101 #define TELOPT_SUPDUP   21      /* supdup protocol */
 102 #define TELOPT_SUPDUPOUTPUT 22  /* supdup output */
 103 #define TELOPT_SNDLOC   23      /* send location */
 104 #define TELOPT_TTYPE    24      /* terminal type */
 105 #define TELOPT_EOR      25      /* end or record */
 106 #define TELOPT_TUID     26      /* TACACS user identification */
 107 #define TELOPT_OUTMRK   27      /* output marking */
 108 #define TELOPT_TTYLOC   28      /* terminal location number */
 109 #define TELOPT_3270REGIME 29    /* 3270 regime */
 110 #define TELOPT_X3PAD    30      /* X.3 PAD */
 111 #define TELOPT_NAWS     31      /* window size */
 112 #define TELOPT_TSPEED   32      /* terminal speed */
 113 #define TELOPT_LFLOW    33      /* remote flow control */
 114 #define TELOPT_LINEMODE 34      /* Linemode option */
 115 #define TELOPT_XDISPLOC 35      /* X Display Location */
 116 #define TELOPT_OLD_ENVIRON 36   /* Old - Environment variables */
 117 #define TELOPT_AUTHENTICATION 37/* Authenticate */
 118 #define TELOPT_ENCRYPT  38      /* Encryption option */
 119 #define TELOPT_NEW_ENVIRON 39   /* New - Environment variables */
 120 #define TELOPT_TN3270E  40      /* RFC2355 - TN3270 Enhancements */
 121 #define TELOPT_CHARSET  42      /* RFC2066 - Charset */
 122 #define TELOPT_COMPORT  44      /* RFC2217 - Com Port Control */
 123 #define TELOPT_KERMIT   47      /* RFC2840 - Kermit */
 124 #define TELOPT_EXOPL    255     /* extended-options-list */
 125
 126
 127 #define TELOPT_FIRST    TELOPT_BINARY
 128 #define TELOPT_LAST     TELOPT_KERMIT
 129 #define TELOPT_OK(x)    ((unsigned int)(x) <= TELOPT_LAST)
 130 #define TELOPT(x)       telopts[(x)-TELOPT_FIRST]
 131
 132 #define NTELOPTS        (1+TELOPT_LAST)
 133
 134 #ifdef TELOPTS
 135 const char *telopts[NTELOPTS+1] = {
 136         "BINARY", "ECHO", "RCP", "SUPPRESS GO AHEAD", "NAME",
 137         "STATUS", "TIMING MARK", "RCTE", "NAOL", "NAOP",
 138         "NAOCRD", "NAOHTS", "NAOHTD", "NAOFFD", "NAOVTS",
 139         "NAOVTD", "NAOLFD", "EXTEND ASCII", "LOGOUT", "BYTE MACRO",
 140         "DATA ENTRY TERMINAL", "SUPDUP", "SUPDUP OUTPUT",
 141         "SEND LOCATION", "TERMINAL TYPE", "END OF RECORD",
 142         "TACACS UID", "OUTPUT MARKING", "TTYLOC",
 143         "3270 REGIME", "X.3 PAD", "NAWS", "TSPEED", "LFLOW",
 144         "LINEMODE", "XDISPLOC", "OLD-ENVIRON", "AUTHENTICATION",
 145         "ENCRYPT", "NEW-ENVIRON", "TN3270E", "CHARSET", "COM-PORT",
 146         "KERMIT",
 147         0
 148 };
 149 #else
 150 extern const char *telopts[NTELOPTS+1];
 151 #endif
 152
 153 /* sub-option qualifiers */
 154 #define TELQUAL_IS      0       /* option is... */
 155 #define TELQUAL_SEND    1       /* send option */
 156 #define TELQUAL_INFO    2       /* ENVIRON: informational version of IS */
 157 #define TELQUAL_REPLY   2       /* AUTHENTICATION: client version of IS */
 158 #define TELQUAL_NAME    3       /* AUTHENTICATION: client version of IS */
 159
 160 #define LFLOW_OFF               0       /* Disable remote flow control */
 161 #define LFLOW_ON                1       /* Enable remote flow control */
 162 #define LFLOW_RESTART_ANY       2       /* Restart output on any char */
 163 #define LFLOW_RESTART_XON       3       /* Restart output only on XON */
 164
 165 /*
 166  * LINEMODE suboptions
 167  */
 168
 169 #define LM_MODE         1
 170 #define LM_FORWARDMASK  2
 171 #define LM_SLC          3
 172
 173 #define MODE_EDIT       0x01
 174 #define MODE_TRAPSIG    0x02
 175 #define MODE_ACK        0x04
 176 #define MODE_SOFT_TAB   0x08
 177 #define MODE_LIT_ECHO   0x10
 178
 179 #define MODE_MASK       0x1f
 180
 181 /* Not part of protocol, but needed to simplify things... */
 182 #define MODE_FLOW               0x0100
 183 #define MODE_ECHO               0x0200
 184 #define MODE_INBIN              0x0400
 185 #define MODE_OUTBIN             0x0800
 186 #define MODE_FORCE              0x1000
 187
 188 #define SLC_SYNCH       1
 189 #define SLC_BRK         2
 190 #define SLC_IP          3
 191 #define SLC_AO          4
 192 #define SLC_AYT         5
 193 #define SLC_EOR         6
 194 #define SLC_ABORT       7
 195 #define SLC_EOF         8
 196 #define SLC_SUSP        9
 197 #define SLC_EC          10
 198 #define SLC_EL          11
 199 #define SLC_EW          12
 200 #define SLC_RP          13
 201 #define SLC_LNEXT       14
 202 #define SLC_XON         15
 203 #define SLC_XOFF        16
 204 #define SLC_FORW1       17
 205 #define SLC_FORW2       18
 206 #define SLC_MCL         19
 207 #define SLC_MCR         20
 208 #define SLC_MCWL        21
 209 #define SLC_MCWR        22
 210 #define SLC_MCBOL       23
 211 #define SLC_MCEOL       24
 212 #define SLC_INSRT       25
 213 #define SLC_OVER        26
 214 #define SLC_ECR         27
 215 #define SLC_EWR         28
 216 #define SLC_EBOL        29
 217 #define SLC_EEOL        30
 218
 219 #define NSLC            30
 220
 221 /*
 222  * For backwards compatibility, we define SLC_NAMES to be the
 223  * list of names if SLC_NAMES is not defined.
 224  */
 225 #define SLC_NAMELIST    "0", "SYNCH", "BRK", "IP", "AO", "AYT", "EOR",  \
 226                         "ABORT", "EOF", "SUSP", "EC", "EL", "EW", "RP", \
 227                         "LNEXT", "XON", "XOFF", "FORW1", "FORW2",       \
 228                         "MCL", "MCR", "MCWL", "MCWR", "MCBOL",          \
 229                         "MCEOL", "INSRT", "OVER", "ECR", "EWR",         \
 230                         "EBOL", "EEOL",                                 \
 231                         0
 232
 233 #ifdef  SLC_NAMES
 234 char *slc_names[] = {
 235         SLC_NAMELIST
 236 };
 237 #else
 238 extern char *slc_names[];
 239 #define SLC_NAMES SLC_NAMELIST
 240 #endif
 241
 242 #define SLC_NAME_OK(x)  ((unsigned int)(x) <= NSLC)
 243 #define SLC_NAME(x)     slc_names[x]
 244
 245 #define SLC_NOSUPPORT   0
 246 #define SLC_CANTCHANGE  1
 247 #define SLC_VARIABLE    2
 248 #define SLC_DEFAULT     3
 249 #define SLC_LEVELBITS   0x03
 250
 251 #define SLC_FUNC        0
 252 #define SLC_FLAGS       1
 253 #define SLC_VALUE       2
 254
 255 #define SLC_ACK         0x80
 256 #define SLC_FLUSHIN     0x40
 257 #define SLC_FLUSHOUT    0x20
 258
 259 #define OLD_ENV_VAR     1
 260 #define OLD_ENV_VALUE   0
 261 #define NEW_ENV_VAR     0
 262 #define NEW_ENV_VALUE   1
 263 #define ENV_ESC         2
 264 #define ENV_USERVAR     3
 265
 266 /*
 267  * AUTHENTICATION suboptions
 268  */
 269
 270 /*
 271  * Who is authenticating who ...
 272  */
 273 #define AUTH_WHO_CLIENT         0       /* Client authenticating server */
 274 #define AUTH_WHO_SERVER         1       /* Server authenticating client */
 275 #define AUTH_WHO_MASK           1
 276
 277 /*
 278  * amount of authentication done
 279  */
 280 #define AUTH_HOW_ONE_WAY        0
 281 #define AUTH_HOW_MUTUAL         2
 282 #define AUTH_HOW_MASK           2
 283
 284 /*
 285  * should we be encrypting? (not yet formally standardized)
 286  */
 287 #define AUTH_ENCRYPT_OFF        0
 288 #define AUTH_ENCRYPT_ON         4
 289 #define AUTH_ENCRYPT_MASK       4
 290
 291 #define AUTHTYPE_NULL           0
 292 #define AUTHTYPE_KERBEROS_V4    1
 293 #define AUTHTYPE_KERBEROS_V5    2
 294 #define AUTHTYPE_SPX            3
 295 #define AUTHTYPE_MINK           4
 296 #define AUTHTYPE_SRA            6
 297 #define AUTHTYPE_CNT            7
 298
 299 #define AUTHTYPE_TEST           99
 300
 301 #ifdef  AUTH_NAMES
 302 const char *authtype_names[] = {
 303         "NULL", "KERBEROS_V4", "KERBEROS_V5", "SPX", "MINK", NULL, "SRA",
 304         0
 305 };
 306 #else
 307 extern const char *authtype_names[];
 308 #endif
 309
 310 #define AUTHTYPE_NAME_OK(x)     ((unsigned int)(x) < AUTHTYPE_CNT)
 311 #define AUTHTYPE_NAME(x)        authtype_names[x]
 312
 313 /*
 314  * ENCRYPTion suboptions
 315  */
 316 #define ENCRYPT_IS              0       /* I pick encryption type ... */
 317 #define ENCRYPT_SUPPORT         1       /* I support encryption types ... */
 318 #define ENCRYPT_REPLY           2       /* Initial setup response */
 319 #define ENCRYPT_START           3       /* Am starting to send encrypted */
 320 #define ENCRYPT_END             4       /* Am ending encrypted */
 321 #define ENCRYPT_REQSTART        5       /* Request you start encrypting */
 322 #define ENCRYPT_REQEND          6       /* Request you send encrypting */
 323 #define ENCRYPT_ENC_KEYID       7
 324 #define ENCRYPT_DEC_KEYID       8
 325 #define ENCRYPT_CNT             9
 326
 327 #define ENCTYPE_ANY             0
 328 #define ENCTYPE_DES_CFB64       1
 329 #define ENCTYPE_DES_OFB64       2
 330 #define ENCTYPE_CNT             3
 331
 332 #ifdef  ENCRYPT_NAMES
 333 const char *encrypt_names[] = {
 334         "IS", "SUPPORT", "REPLY", "START", "END",
 335         "REQUEST-START", "REQUEST-END", "ENC-KEYID", "DEC-KEYID",
 336         0
 337 };
 338 const char *enctype_names[] = {
 339         "ANY", "DES_CFB64",  "DES_OFB64",
 340         0
 341 };
 342 #else
 343 extern const char *encrypt_names[];
 344 extern const char *enctype_names[];
 345 #endif
 346
 347
 348 #define ENCRYPT_NAME_OK(x)      ((unsigned int)(x) < ENCRYPT_CNT)
 349 #define ENCRYPT_NAME(x)         encrypt_names[x]
 350
 351 #define ENCTYPE_NAME_OK(x)      ((unsigned int)(x) < ENCTYPE_CNT)
 352 #define ENCTYPE_NAME(x)         enctype_names[x]
 353
 354 #endif /* _ARPA_TELNET_H_ */