No empty .Rs/.Re
[netbsd-mini2440.git] / sys / arch / atari / dev / ym2149reg.h
blobbf07b5f448ce6622c52cb3f19310a8616109304b
1 /* $NetBSD: ym2149reg.h,v 1.6 2009/03/14 14:45:56 dsl Exp $ */
3 /*
4 * Copyright (c) 1996 Leo Weppelman.
5 * All rights reserved.
7 * Redistribution and use in source and binary forms, with or without
8 * modification, are permitted provided that the following conditions
9 * are met:
10 * 1. Redistributions of source code must retain the above copyright
11 * notice, this list of conditions and the following disclaimer.
12 * 2. Redistributions in binary form must reproduce the above copyright
13 * notice, this list of conditions and the following disclaimer in the
14 * documentation and/or other materials provided with the distribution.
16 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
17 * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
18 * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
19 * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
20 * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
21 * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
22 * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
23 * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
24 * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
25 * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
28 #ifndef _YM2149REG_H
29 #define _YM2149REG_H
31 * Yahama YM-2149 Programmable Sound Generator
34 #define YM2149 ((struct ym2149 *)AD_SOUND)
36 struct ym2149 {
37 volatile u_char sdb[4]; /* use only the even bytes */
40 #define sd_selr sdb[0] /* select register */
41 #define sd_rdat sdb[0] /* read register data */
42 #define sd_wdat sdb[2] /* write register data */
45 * Accessing the YM-2149 registers is indirect through ST-specific
46 * circuitry by writing the register number into sd_selr.
48 #define YM_PA0 0 /* Period Channel A, bits 0-7 */
49 #define YM_PA1 1 /* Period Channel A, bits 8-11 */
50 #define YM_PB0 2 /* Period Channel B, bits 0-7 */
51 #define YM_PB1 3 /* Period Channel B, bits 8-11 */
52 #define YM_PC0 4 /* Period Channel C, bits 0-7 */
53 #define YM_PC1 5 /* Period Channel C, bits 8-11 */
54 #define YM_PNG 6 /* Period Noise Generator, bits 0-4 */
55 #define YM_MFR 7 /* Multi Function Register */
56 #define YM_VA 8 /* Volume Channel A */
57 #define YM_VB 9 /* Volume Channel B */
58 #define YM_VC 10 /* Volume Channel C */
59 #define YM_PE0 11 /* Period Envelope, bits 0-7 */
60 #define YM_PE1 12 /* Period Envelope, bits 8-15 */
61 #define YM_WFE 13 /* Wave Form Envelope */
62 #define YM_IOA 14 /* I/O port A */
63 #define YM_IOB 15 /* I/O port B */
65 /* bits in MFR: */
66 #define SA_OFF 0x01 /* Sound Channel A off */
67 #define SB_OFF 0x02 /* Sound Channel B off */
68 #define SC_OFF 0x04 /* Sound Channel C off */
69 #define NA_OFF 0x08 /* Noise Channel A off */
70 #define NB_OFF 0x10 /* Noise Channel B off */
71 #define NC_OFF 0x20 /* Noise Channel C off */
72 #define PA_OUT 0x40 /* Port A for Output */
73 #define PB_OUT 0x80 /* Port B for Output */
75 /* bits in Vx: */
76 #define VOLUME 0x0F /* 16 steps */
77 #define ENVELOP 0x10 /* volume steered by envelope */
79 /* bits in WFE: */
80 #define WF_HOLD 0x01 /* hold after one period */
81 #define WF_ALTERNAT 0x02 /* up and down (no saw teeth) */
82 #define WF_ATTACK 0x04 /* start up */
83 #define WF_CONTINUE 0x08 /* multiple periods */
85 /* names for bits in Port A (ST specific): */
86 #define PA_SIDEB 0x01 /* select floppy head - if double sided */
87 #define PA_FLOP0 0x02 /* Drive Select Floppy 0 */
88 #define PA_FLOP1 0x04 /* Drive Select Floppy 1 */
89 #define PA_FDSEL (PA_SIDEB|PA_FLOP0|PA_FLOP1)
90 #define PA_SRTS 0x08 /* Serial RTS */
91 #define PA_SDTR 0x10 /* Serial DTR */
92 #define PA_PSTROBE 0x20 /* Parallel Strobe */
93 #define PA_USER 0x40 /* Free Pin on Monitor Connector */
94 #define PA_SER2 0x80 /* Choose between LAN or Ser2 port */
97 * Access macro's for Port A
98 * Port A is defined as an output port. Reading the port does not work
99 * reliably so keeping a 'soft-copy' seems to be the only way to make
100 * things work.
102 extern u_char ym2149_ioa; /* Soft-copy of port-A */
104 #define ym2149_write_ioport(port, value) { \
105 int _os = splhigh(); \
107 YM2149->sd_selr = port; \
108 YM2149->sd_wdat = value; \
109 splx(_os); \
112 #define ym2149_write_ioport2(port, value) { \
113 YM2149->sd_selr = port; \
114 YM2149->sd_wdat = value; \
117 #define ym2149_fd_select(select) { \
118 int _s = splhigh(); \
120 ym2149_ioa = (ym2149_ioa & ~PA_FDSEL) | (select & PA_FDSEL); \
121 ym2149_write_ioport(YM_IOA, ym2149_ioa); \
122 splx(_s); \
125 #define ym2149_rts(set) { \
126 int _s = splhigh(); \
128 ym2149_ioa = set ? ym2149_ioa | PA_SRTS : ym2149_ioa & ~PA_SRTS;\
129 ym2149_write_ioport(YM_IOA, ym2149_ioa); \
130 splx(_s); \
133 #define ym2149_dtr(set) { \
134 int _s = splhigh(); \
136 ym2149_ioa = set ? ym2149_ioa | PA_SDTR : ym2149_ioa & ~PA_SDTR;\
137 ym2149_write_ioport(YM_IOA, ym2149_ioa); \
138 splx(_s); \
141 #define ym2149_strobe(set) { \
142 int _s = splhigh(); \
144 ym2149_ioa = set ? ym2149_ioa | PA_PSTROBE : ym2149_ioa & ~PA_PSTROBE;\
145 ym2149_write_ioport(YM_IOA, ym2149_ioa); \
146 splx(_s); \
149 #define ym2149_ser2(set) { \
150 int _s = splhigh(); \
152 ym2149_ioa = set ? ym2149_ioa | PA_SER2 : ym2149_ioa & ~PA_SER2;\
153 ym2149_write_ioport(YM_IOA, ym2149_ioa); \
154 splx(_s); \
157 #undef ym2149_write_ioport2
159 #ifdef _KERNEL
161 * Prototypes
163 void ym2149_init(void);
164 #endif
166 #endif /* _YM2149REG_H */