No empty .Rs/.Re
[netbsd-mini2440.git] / sys / arch / sun3 / dev / i82586.h
blob48c1d2687f568772863e66305f96af7299d5c433
1 /* $NetBSD: i82586.h,v 1.4.6.1 1997/03/12 14:04:34 is Exp $ */
3 /*-
4 * Copyright (c) 1992, University of Vermont and State Agricultural College.
5 * Copyright (c) 1992, Garrett A. Wollman.
6 * All rights reserved.
8 * Redistribution and use in source and binary forms, with or without
9 * modification, are permitted provided that the following conditions
10 * are met:
11 * 1. Redistributions of source code must retain the above copyright
12 * notice, this list of conditions and the following disclaimer.
13 * 2. Redistributions in binary form must reproduce the above copyright
14 * notice, this list of conditions and the following disclaimer in the
15 * documentation and/or other materials provided with the distribution.
16 * 3. All advertising materials mentioning features or use of this software
17 * must display the following acknowledgement:
18 * This product includes software developed by the University of
19 * Vermont and State Agricultural College and Garrett A. Wollman.
20 * 4. Neither the name of the University nor the name of the author
21 * may be used to endorse or promote products derived from this software
22 * without specific prior written permission.
24 * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
25 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
26 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
27 * ARE DISCLAIMED. IN NO EVENT SHALL THE UNIVERSITY OR AUTHOR BE LIABLE
28 * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
29 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
30 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
31 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
32 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
33 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
34 * SUCH DAMAGE.
38 * Intel 82586 Ethernet chip
39 * Register, bit, and structure definitions.
41 * Written by GAW with reference to the Clarkson Packet Driver code for this
42 * chip written by Russ Nelson and others.
44 * Sun support added by Charles D. Cranor, 25-Oct-94
46 * XXX: This is very much like dev/ic/i82586reg.h except for
47 * XXX: the SWAP() macro used here to byte-swap word constants.
48 * XXX: (This should probably replace the version in dev/ic)
51 struct ie_en_addr {
52 u_char data[6];
56 * This is the master configuration block. It tells the hardware where all
57 * the rest of the stuff is.
59 struct ie_sys_conf_ptr {
60 u_short mbz; /* must be zero (alignment) */
61 u_char ie_bus_use; /* true if 8-bit only */
62 u_char mbz2[5]; /* must be zero */
63 u_int ie_iscp_ptr; /* 24-bit physaddr of ISCP */
67 * Note that this is wired in hardware; the SCP is always located here, no
68 * matter what.
70 #define IE_SCP_ADDR 0xfffff4
73 * The tells the hardware where all the rest of the stuff is, too.
74 * FIXME: some of these should be re-commented after we figure out their
75 * REAL function.
77 struct ie_int_sys_conf_ptr {
78 u_char ie_busy; /* zeroed after init */
79 u_char mbz;
80 u_short ie_scb_offset; /* 16-bit physaddr of next struct */
81 u_int ie_base; /* 24-bit physaddr for all 16-bit vars */
85 * This FINALLY tells the hardware what to do and where to put it.
87 struct ie_sys_ctl_block {
88 u_short ie_status; /* status word */
89 u_short ie_command; /* command word */
90 u_short ie_command_list; /* 16-pointer to command block list */
91 u_short ie_recv_list; /* 16-pointer to receive frame list */
92 u_short ie_err_crc; /* CRC errors */
93 u_short ie_err_align; /* Alignment errors */
94 u_short ie_err_resource; /* Resource errors */
95 u_short ie_err_overrun; /* Overrun errors */
98 /* Command values */
99 #define IE_RU_COMMAND SWAP(0x0070) /* mask for RU command */
100 #define IE_RU_NOP SWAP(0) /* for completeness */
101 #define IE_RU_START SWAP(0x0010) /* start receive unit command */
102 #define IE_RU_ENABLE SWAP(0x0020) /* enable receiver command */
103 #define IE_RU_DISABLE SWAP(0x0030) /* disable receiver command */
104 #define IE_RU_ABORT SWAP(0x0040) /* abort current receive operation */
106 #define IE_CU_COMMAND SWAP(0x0700) /* mask for CU command */
107 #define IE_CU_NOP SWAP(0) /* included for completeness */
108 #define IE_CU_START SWAP(0x0100) /* do-command command */
109 #define IE_CU_RESUME SWAP(0x0200) /* resume a suspended cmd list */
110 #define IE_CU_STOP SWAP(0x0300) /* SUSPEND was already taken */
111 #define IE_CU_ABORT SWAP(0x0400) /* abort current command */
113 #define IE_ACK_COMMAND SWAP(0xf000) /* mask for ACK command */
114 #define IE_ACK_CX SWAP(0x8000) /* ack IE_ST_DONE */
115 #define IE_ACK_FR SWAP(0x4000) /* ack IE_ST_RECV */
116 #define IE_ACK_CNA SWAP(0x2000) /* ack IE_ST_ALLDONE */
117 #define IE_ACK_RNR SWAP(0x1000) /* ack IE_ST_RNR */
119 #define IE_ACTION_COMMAND(x) (((x) & IE_CU_COMMAND) == IE_CU_START)
120 /* is this command an action command? */
122 /* Status values */
123 #define IE_ST_WHENCE SWAP(0xf000) /* mask for cause of interrupt */
124 #define IE_ST_DONE SWAP(0x8000) /* command with I bit completed */
125 #define IE_ST_RECV SWAP(0x4000) /* frame received */
126 #define IE_ST_ALLDONE SWAP(0x2000) /* all commands completed */
127 #define IE_ST_RNR SWAP(0x1000) /* receive not ready */
129 #define IE_CU_STATUS SWAP(0x700) /* mask for command unit status */
130 #define IE_CU_ACTIVE SWAP(0x200) /* command unit is active */
131 #define IE_CU_SUSPEND SWAP(0x100) /* command unit is suspended */
133 #define IE_RU_STATUS SWAP(0x70) /* mask for receiver unit status */
134 #define IE_RU_SUSPEND SWAP(0x10) /* receiver is suspended */
135 #define IE_RU_NOSPACE SWAP(0x20) /* receiver has no resources */
136 #define IE_RU_READY SWAP(0x40) /* reveiver is ready */
139 * This is filled in partially by the chip, partially by us.
141 struct ie_recv_frame_desc {
142 u_short ie_fd_status; /* status for this frame */
143 u_short ie_fd_last; /* end of frame list flag */
144 u_short ie_fd_next; /* 16-pointer to next RFD */
145 u_short ie_fd_buf_desc; /* 16-pointer to list of buffer desc's */
146 struct ie_en_addr dest; /* destination ether */
147 struct ie_en_addr src; /* source ether */
148 u_short ie_length; /* 802 length/Ether type */
149 u_short mbz; /* must be zero */
152 #define IE_FD_LAST SWAP(0x8000) /* last rfd in list */
153 #define IE_FD_SUSP SWAP(0x4000) /* suspend RU after receipt */
155 #define IE_FD_COMPLETE SWAP(0x8000) /* frame is complete */
156 #define IE_FD_BUSY SWAP(0x4000) /* frame is busy */
157 #define IE_FD_OK SWAP(0x2000) /* frame is bad */
158 #define IE_FD_RNR SWAP(0x0200) /* receiver out of resources here */
161 * linked list of buffers...
163 struct ie_recv_buf_desc {
164 u_short ie_rbd_actual; /* status for this buffer */
165 u_short ie_rbd_next; /* 16-pointer to next RBD */
166 u_int ie_rbd_buffer; /* 24-pointer to buffer for this RBD */
167 u_short ie_rbd_length; /* length of the buffer */
168 u_short mbz; /* must be zero */
171 #define IE_RBD_LAST SWAP(0x8000) /* last buffer */
172 #define IE_RBD_USED SWAP(0x4000) /* this buffer has data */
174 * All commands share this in common.
176 struct ie_cmd_common {
177 u_short ie_cmd_status; /* status of this command */
178 u_short ie_cmd_cmd; /* command word */
179 u_short ie_cmd_link; /* link to next command */
182 #define IE_STAT_COMPL SWAP(0x8000) /* command is completed */
183 #define IE_STAT_BUSY SWAP(0x4000) /* command is running now */
184 #define IE_STAT_OK SWAP(0x2000) /* command completed successfully */
185 #define IE_STAT_ABORT SWAP(0x1000) /* command was aborted */
187 #define IE_CMD_NOP SWAP(0x0000) /* NOP */
188 #define IE_CMD_IASETUP SWAP(0x0001) /* initial address setup */
189 #define IE_CMD_CONFIG SWAP(0x0002) /* configure command */
190 #define IE_CMD_MCAST SWAP(0x0003) /* multicast setup command */
191 #define IE_CMD_XMIT SWAP(0x0004) /* transmit command */
192 #define IE_CMD_TDR SWAP(0x0005) /* time-domain reflectometer command */
193 #define IE_CMD_DUMP SWAP(0x0006) /* dump command */
194 #define IE_CMD_DIAGNOSE SWAP(0x0007) /* diagnostics command */
196 #define IE_CMD_LAST SWAP(0x8000) /* this is the last command in the list */
197 #define IE_CMD_SUSPEND SWAP(0x4000) /* suspend CU after this command */
198 #define IE_CMD_INTR SWAP(0x2000) /* post an interrupt after completion */
201 * This is the command to transmit a frame.
203 struct ie_xmit_cmd {
204 struct ie_cmd_common com; /* common part */
205 #define ie_xmit_status com.ie_cmd_status
207 u_short ie_xmit_desc; /* 16-pointer to buffer descriptor */
208 struct ie_en_addr ie_xmit_addr; /* destination address */
210 u_short ie_xmit_length; /* 802.3 length/Ether type field */
213 #define IE_XS_MAXCOLL SWAP(0x000f) /* number of collisions during transmit */
214 #define IE_XS_EXCMAX SWAP(0x0020) /* exceeded maximum number of collisions */
215 #define IE_XS_SQE SWAP(0x0040) /* SQE positive */
216 #define IE_XS_DEFERRED SWAP(0x0080) /* transmission deferred */
217 #define IE_XS_UNDERRUN SWAP(0x0100) /* DMA underrun */
218 #define IE_XS_LOSTCTS SWAP(0x0200) /* Lost CTS */
219 #define IE_XS_NOCARRIER SWAP(0x0400) /* No Carrier */
220 #define IE_XS_LATECOLL SWAP(0x0800) /* Late collision */
223 * This is a buffer descriptor for a frame to be transmitted.
226 struct ie_xmit_buf {
227 u_short ie_xmit_flags; /* see below */
228 u_short ie_xmit_next; /* 16-pointer to next desc. */
229 u_int ie_xmit_buf; /* 24-pointer to the actual buffer */
232 #define IE_XMIT_LAST SWAP(0x8000) /* this TBD is the last one */
233 /* The rest of the `flags' word is actually the length. */
236 * Multicast setup command.
237 * The command must fit in a transmit buffer (1536).
238 * Also, would like size of ie_mcast_addrs to be even.
241 #define MAXMCAST 247
243 struct ie_mcast_cmd {
244 struct ie_cmd_common com; /* common part */
245 #define ie_mcast_status com.ie_cmd_status
247 u_short ie_mcast_bytes; /* size (in bytes) of multicast addresses */
248 struct ie_en_addr ie_mcast_addrs[MAXMCAST + 1]; /* space for them */
252 * Time Domain Reflectometer command.
255 struct ie_tdr_cmd {
256 struct ie_cmd_common com; /* common part */
257 #define ie_tdr_status com.ie_cmd_status
259 u_short ie_tdr_time; /* error bits and time */
262 #define IE_TDR_SUCCESS SWAP(0x8000) /* TDR succeeded without error */
263 #define IE_TDR_XCVR SWAP(0x4000) /* detected a transceiver problem */
264 #define IE_TDR_OPEN SWAP(0x2000) /* detected an open */
265 #define IE_TDR_SHORT SWAP(0x1000) /* TDR detected a short */
266 #define IE_TDR_TIME SWAP(0x07ff) /* mask for reflection time */
269 * Initial Address Setup command
271 struct ie_iasetup_cmd {
272 struct ie_cmd_common com;
273 #define ie_iasetup_status com.ie_cmd_status
275 struct ie_en_addr ie_address;
279 * Configuration command
281 struct ie_config_cmd {
282 struct ie_cmd_common com; /* common part */
283 #define ie_config_status com.ie_cmd_status
285 u_char ie_config_count; /* byte count (0x0c) */
286 u_char ie_fifo; /* fifo (8) */
287 u_char ie_save_bad; /* save bad frames (0x40) */
288 u_char ie_addr_len; /* address length (0x2e) (AL-LOC == 1) */
289 u_char ie_priority; /* priority and backoff (0x0) */
290 u_char ie_ifs; /* inter-frame spacing (0x60) */
291 u_char ie_slot_low; /* slot time, LSB (0x0) */
292 u_char ie_slot_high; /* slot time, MSN, and retries (0xf2) */
293 u_char ie_promisc; /* 1 if promiscuous, else 0 */
294 u_char ie_crs_cdt; /* CSMA/CD parameters (0x0) */
295 u_char ie_min_len; /* min frame length (0x40) */
296 u_char ie_junk; /* stuff for 82596 (0xff) */