?  search:
summary | log | graphiclog1 | graphiclog2 | commit | commitdiff | tree | refs | edit | fork
blame | history | raw | HEAD
No empty .Rs/.Re
[netbsd-mini2440.git] / sys / dev / ic / ispmbox.h
blobf29ca95659ec69e407ca2ad144c2fcfdc7cdad9c
1 /* $NetBSD: ispmbox.h,v 1.53 2009/06/25 23:44:02 mjacob Exp $ */
2 /*
3 * Copyright (C) 1997, 1998, 1999 National Aeronautics & Space Administration
4 * All rights reserved.
5 *
6 * Additional Copyright (C) 2000-2007 by Matthew Jacob
7 * All rights reserved.
8 *
9 * Redistribution and use in source and binary forms, with or without
10 * modification, are permitted provided that the following conditions
11 * are met:
12 * 1. Redistributions of source code must retain the above copyright
13 * notice, this list of conditions and the following disclaimer.
14 * 2. Redistributions in binary form must reproduce the above copyright
15 * notice, this list of conditions and the following disclaimer in the
16 * documentation and/or other materials provided with the distribution.
17 * 3. The name of the author may not be used to endorse or promote products
18 * derived from this software without specific prior written permission
19 *
20 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
21 * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
22 * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
23 * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
24 * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
25 * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
26 * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
27 * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
28 * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
29 * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
30 */
31 /*
32 * Mailbox and Queue Entry Definitions for for Qlogic ISP SCSI adapters.
33 */
34 #ifndef _ISPMBOX_H
35 #define _ISPMBOX_H
36
37 /*
38 * Mailbox Command Opcodes
39 */
40 #define MBOX_NO_OP 0x0000
41 #define MBOX_LOAD_RAM 0x0001
42 #define MBOX_EXEC_FIRMWARE 0x0002
43 #define MBOX_DUMP_RAM 0x0003
44 #define MBOX_WRITE_RAM_WORD 0x0004
45 #define MBOX_READ_RAM_WORD 0x0005
46 #define MBOX_MAILBOX_REG_TEST 0x0006
47 #define MBOX_VERIFY_CHECKSUM 0x0007
48 #define MBOX_ABOUT_FIRMWARE 0x0008
49 #define MBOX_LOAD_RISC_RAM_2100 0x0009
50 /* a */
51 #define MBOX_LOAD_RISC_RAM 0x000b
52 /* c */
53 #define MBOX_WRITE_RAM_WORD_EXTENDED 0x000d
54 #define MBOX_CHECK_FIRMWARE 0x000e
55 #define MBOX_READ_RAM_WORD_EXTENDED 0x000f
56 #define MBOX_INIT_REQ_QUEUE 0x0010
57 #define MBOX_INIT_RES_QUEUE 0x0011
58 #define MBOX_EXECUTE_IOCB 0x0012
59 #define MBOX_WAKE_UP 0x0013
60 #define MBOX_STOP_FIRMWARE 0x0014
61 #define MBOX_ABORT 0x0015
62 #define MBOX_ABORT_DEVICE 0x0016
63 #define MBOX_ABORT_TARGET 0x0017
64 #define MBOX_BUS_RESET 0x0018
65 #define MBOX_STOP_QUEUE 0x0019
66 #define MBOX_START_QUEUE 0x001a
67 #define MBOX_SINGLE_STEP_QUEUE 0x001b
68 #define MBOX_ABORT_QUEUE 0x001c
69 #define MBOX_GET_DEV_QUEUE_STATUS 0x001d
70 /* 1e */
71 #define MBOX_GET_FIRMWARE_STATUS 0x001f
72 #define MBOX_GET_INIT_SCSI_ID 0x0020
73 #define MBOX_GET_SELECT_TIMEOUT 0x0021
74 #define MBOX_GET_RETRY_COUNT 0x0022
75 #define MBOX_GET_TAG_AGE_LIMIT 0x0023
76 #define MBOX_GET_CLOCK_RATE 0x0024
77 #define MBOX_GET_ACT_NEG_STATE 0x0025
78 #define MBOX_GET_ASYNC_DATA_SETUP_TIME 0x0026
79 #define MBOX_GET_SBUS_PARAMS 0x0027
80 #define MBOX_GET_PCI_PARAMS MBOX_GET_SBUS_PARAMS
81 #define MBOX_GET_TARGET_PARAMS 0x0028
82 #define MBOX_GET_DEV_QUEUE_PARAMS 0x0029
83 #define MBOX_GET_RESET_DELAY_PARAMS 0x002a
84 /* 2b */
85 /* 2c */
86 /* 2d */
87 /* 2e */
88 /* 2f */
89 #define MBOX_SET_INIT_SCSI_ID 0x0030
90 #define MBOX_SET_SELECT_TIMEOUT 0x0031
91 #define MBOX_SET_RETRY_COUNT 0x0032
92 #define MBOX_SET_TAG_AGE_LIMIT 0x0033
93 #define MBOX_SET_CLOCK_RATE 0x0034
94 #define MBOX_SET_ACT_NEG_STATE 0x0035
95 #define MBOX_SET_ASYNC_DATA_SETUP_TIME 0x0036
96 #define MBOX_SET_SBUS_CONTROL_PARAMS 0x0037
97 #define MBOX_SET_PCI_PARAMETERS 0x0037
98 #define MBOX_SET_TARGET_PARAMS 0x0038
99 #define MBOX_SET_DEV_QUEUE_PARAMS 0x0039
100 #define MBOX_SET_RESET_DELAY_PARAMS 0x003a
101 /* 3b */
102 /* 3c */
103 /* 3d */
104 /* 3e */
105 /* 3f */
106 #define MBOX_RETURN_BIOS_BLOCK_ADDR 0x0040
107 #define MBOX_WRITE_FOUR_RAM_WORDS 0x0041
108 #define MBOX_EXEC_BIOS_IOCB 0x0042
109 #define MBOX_SET_FW_FEATURES 0x004a
110 #define MBOX_GET_FW_FEATURES 0x004b
111 #define FW_FEATURE_FAST_POST 0x1
112 #define FW_FEATURE_LVD_NOTIFY 0x2
113 #define FW_FEATURE_RIO_32BIT 0x4
114 #define FW_FEATURE_RIO_16BIT 0x8
115
116 #define MBOX_INIT_REQ_QUEUE_A64 0x0052
117 #define MBOX_INIT_RES_QUEUE_A64 0x0053
118
119 #define MBOX_ENABLE_TARGET_MODE 0x0055
120 #define ENABLE_TARGET_FLAG 0x8000
121 #define ENABLE_TQING_FLAG 0x0004
122 #define ENABLE_MANDATORY_DISC 0x0002
123 #define MBOX_GET_TARGET_STATUS 0x0056
124
125 /* These are for the ISP2X00 FC cards */
126 #define MBOX_GET_LOOP_ID 0x0020
127 /* for 24XX cards, outgoing mailbox 7 has these values for F or FL topologies */
128 #define ISP24XX_INORDER 0x0100
129 #define ISP24XX_NPIV_SAN 0x0400
130 #define ISP24XX_VSAN_SAN 0x1000
131 #define ISP24XX_FC_SP_SAN 0x2000
132
133 #define MBOX_GET_FIRMWARE_OPTIONS 0x0028
134 #define MBOX_SET_FIRMWARE_OPTIONS 0x0038
135 #define MBOX_GET_RESOURCE_COUNT 0x0042
136 #define MBOX_REQUEST_OFFLINE_MODE 0x0043
137 #define MBOX_ENHANCED_GET_PDB 0x0047
138 #define MBOX_INIT_FIRMWARE_MULTI_ID 0x0048 /* 2400 only */
139 #define MBOX_GET_VP_DATABASE 0x0049 /* 2400 only */
140 #define MBOX_GET_VP_DATABASE_ENTRY 0x004a /* 2400 only */
141 #define MBOX_EXEC_COMMAND_IOCB_A64 0x0054
142 #define MBOX_INIT_FIRMWARE 0x0060
143 #define MBOX_GET_INIT_CONTROL_BLOCK 0x0061
144 #define MBOX_INIT_LIP 0x0062
145 #define MBOX_GET_FC_AL_POSITION_MAP 0x0063
146 #define MBOX_GET_PORT_DB 0x0064
147 #define MBOX_CLEAR_ACA 0x0065
148 #define MBOX_TARGET_RESET 0x0066
149 #define MBOX_CLEAR_TASK_SET 0x0067
150 #define MBOX_ABORT_TASK_SET 0x0068
151 #define MBOX_GET_FW_STATE 0x0069
152 #define MBOX_GET_PORT_NAME 0x006A
153 #define MBOX_GET_LINK_STATUS 0x006B
154 #define MBOX_INIT_LIP_RESET 0x006C
155 #define MBOX_SEND_SNS 0x006E
156 #define MBOX_FABRIC_LOGIN 0x006F
157 #define MBOX_SEND_CHANGE_REQUEST 0x0070
158 #define MBOX_FABRIC_LOGOUT 0x0071
159 #define MBOX_INIT_LIP_LOGIN 0x0072
160 #define MBOX_LUN_RESET 0x007E
161
162 #define MBOX_DRIVER_HEARTBEAT 0x005B
163 #define MBOX_FW_HEARTBEAT 0x005C
164
165 #define MBOX_GET_SET_DATA_RATE 0x005D /* 24XX/23XX only */
166 #define MBGSD_GET_RATE 0
167 #define MBGSD_SET_RATE 1
168 #define MBGSD_SET_RATE_NOW 2 /* 24XX only */
169 #define MBGSD_ONEGB 0
170 #define MBGSD_TWOGB 1
171 #define MBGSD_AUTO 2
172 #define MBGSD_FOURGB 3 /* 24XX only */
173 #define MBGSD_EIGHTGB 4 /* 25XX only */
174
175
176 #define ISP2100_SET_PCI_PARAM 0x00ff
177
178 #define MBOX_BUSY 0x04
179
180 /*
181 * Mailbox Command Complete Status Codes
182 */
183 #define MBOX_COMMAND_COMPLETE 0x4000
184 #define MBOX_INVALID_COMMAND 0x4001
185 #define MBOX_HOST_INTERFACE_ERROR 0x4002
186 #define MBOX_TEST_FAILED 0x4003
187 #define MBOX_COMMAND_ERROR 0x4005
188 #define MBOX_COMMAND_PARAM_ERROR 0x4006
189 #define MBOX_PORT_ID_USED 0x4007
190 #define MBOX_LOOP_ID_USED 0x4008
191 #define MBOX_ALL_IDS_USED 0x4009
192 #define MBOX_NOT_LOGGED_IN 0x400A
193 /* pseudo mailbox completion codes */
194 #define MBOX_REGS_BUSY 0x6000 /* registers in use */
195 #define MBOX_TIMEOUT 0x6001 /* command timed out */
196
197 #define MBLOGALL 0x000f
198 #define MBLOGNONE 0x0000
199 #define MBLOGMASK(x) ((x) & 0xf)
200
201 /*
202 * Asynchronous event status codes
203 */
204 #define ASYNC_BUS_RESET 0x8001
205 #define ASYNC_SYSTEM_ERROR 0x8002
206 #define ASYNC_RQS_XFER_ERR 0x8003
207 #define ASYNC_RSP_XFER_ERR 0x8004
208 #define ASYNC_QWAKEUP 0x8005
209 #define ASYNC_TIMEOUT_RESET 0x8006
210 #define ASYNC_DEVICE_RESET 0x8007
211 #define ASYNC_EXTMSG_UNDERRUN 0x800A
212 #define ASYNC_SCAM_INT 0x800B
213 #define ASYNC_HUNG_SCSI 0x800C
214 #define ASYNC_KILLED_BUS 0x800D
215 #define ASYNC_BUS_TRANSIT 0x800E /* LVD -> HVD, eg. */
216 #define ASYNC_LIP_OCCURRED 0x8010
217 #define ASYNC_LOOP_UP 0x8011
218 #define ASYNC_LOOP_DOWN 0x8012
219 #define ASYNC_LOOP_RESET 0x8013
220 #define ASYNC_PDB_CHANGED 0x8014
221 #define ASYNC_CHANGE_NOTIFY 0x8015
222 #define ASYNC_LIP_F8 0x8016
223 #define ASYNC_LIP_ERROR 0x8017
224 #define ASYNC_SECURITY_UPDATE 0x801B
225 #define ASYNC_CMD_CMPLT 0x8020
226 #define ASYNC_CTIO_DONE 0x8021
227 #define ASYNC_IP_XMIT_DONE 0x8022
228 #define ASYNC_IP_RECV_DONE 0x8023
229 #define ASYNC_IP_BROADCAST 0x8024
230 #define ASYNC_IP_RCVQ_LOW 0x8025
231 #define ASYNC_IP_RCVQ_EMPTY 0x8026
232 #define ASYNC_IP_RECV_DONE_ALIGNED 0x8027
233 #define ASYNC_PTPMODE 0x8030
234 #define ASYNC_RIO1 0x8031
235 #define ASYNC_RIO2 0x8032
236 #define ASYNC_RIO3 0x8033
237 #define ASYNC_RIO4 0x8034
238 #define ASYNC_RIO5 0x8035
239 #define ASYNC_CONNMODE 0x8036
240 #define ISP_CONN_LOOP 1
241 #define ISP_CONN_PTP 2
242 #define ISP_CONN_BADLIP 3
243 #define ISP_CONN_FATAL 4
244 #define ISP_CONN_LOOPBACK 5
245 #define ASYNC_RIO_RESP 0x8040
246 #define ASYNC_RIO_COMP 0x8042
247 #define ASYNC_RCV_ERR 0x8048
248
249 /*
250 * Firmware Options. There are a lot of them.
251 *
252 * IFCOPTN - ISP Fibre Channel Option Word N
253 */
254 #define IFCOPT1_EQFQASYNC (1 << 13) /* enable QFULL notification */
255 #define IFCOPT1_EAABSRCVD (1 << 12)
256 #define IFCOPT1_RJTASYNC (1 << 11) /* enable 8018 notification */
257 #define IFCOPT1_ENAPURE (1 << 10)
258 #define IFCOPT1_ENA8017 (1 << 7)
259 #define IFCOPT1_DISGPIO67 (1 << 6)
260 #define IFCOPT1_LIPLOSSIMM (1 << 5)
261 #define IFCOPT1_DISF7SWTCH (1 << 4)
262 #define IFCOPT1_CTIO_RETRY (1 << 3)
263 #define IFCOPT1_LIPASYNC (1 << 1)
264 #define IFCOPT1_LIPF8 (1 << 0)
265
266 #define IFCOPT2_LOOPBACK (1 << 1)
267 #define IFCOPT2_ATIO3_ONLY (1 << 0)
268
269 #define IFCOPT3_NOPRLI (1 << 4) /* disable automatic sending of PRLI on local loops */
270 #define IFCOPT3_RNDASYNC (1 << 1)
271 /*
272 * 2.01.31 2200 Only. Need Bit 13 in Mailbox 1 for Set Firmware Options
273 * mailbox command to enable this.
274 */
275 #define ASYNC_QFULL_SENT 0x8049
276
277 /*
278 * Needs to be enabled
279 */
280 #define ASYNC_AUTO_PLOGI_RJT 0x8018
281 /*
282 * 24XX only
283 */
284 #define ASYNC_RJT_SENT 0x8049
285
286 /*
287 * All IOCB Queue entries are this size
288 */
289 #define QENTRY_LEN 64
290
291 /*
292 * Special Internal Handle for IOCBs
293 */
294 #define ISP_SPCL_HANDLE 0xa5dead5a
295
296 /*
297 * Command Structure Definitions
298 */
299
300 typedef struct {
301 uint32_t ds_base;
302 uint32_t ds_count;
303 } ispds_t;
304
305 typedef struct {
306 uint32_t ds_base;
307 uint32_t ds_basehi;
308 uint32_t ds_count;
309 } ispds64_t;
310
311 #define DSTYPE_32BIT 0
312 #define DSTYPE_64BIT 1
313 typedef struct {
314 uint16_t ds_type; /* 0-> ispds_t, 1-> ispds64_t */
315 uint32_t ds_segment; /* unused */
316 uint32_t ds_base; /* 32 bit address of DSD list */
317 } ispdslist_t;
318
319
320 typedef struct {
321 uint8_t rqs_entry_type;
322 uint8_t rqs_entry_count;
323 uint8_t rqs_seqno;
324 uint8_t rqs_flags;
325 } isphdr_t;
326
327 /* RQS Flag definitions */
328 #define RQSFLAG_CONTINUATION 0x01
329 #define RQSFLAG_FULL 0x02
330 #define RQSFLAG_BADHEADER 0x04
331 #define RQSFLAG_BADPACKET 0x08
332 #define RQSFLAG_BADCOUNT 0x10
333 #define RQSFLAG_BADORDER 0x20
334 #define RQSFLAG_MASK 0x3f
335
336 /* RQS entry_type definitions */
337 #define RQSTYPE_REQUEST 0x01
338 #define RQSTYPE_DATASEG 0x02
339 #define RQSTYPE_RESPONSE 0x03
340 #define RQSTYPE_MARKER 0x04
341 #define RQSTYPE_CMDONLY 0x05
342 #define RQSTYPE_ATIO 0x06 /* Target Mode */
343 #define RQSTYPE_CTIO 0x07 /* Target Mode */
344 #define RQSTYPE_SCAM 0x08
345 #define RQSTYPE_A64 0x09
346 #define RQSTYPE_A64_CONT 0x0a
347 #define RQSTYPE_ENABLE_LUN 0x0b /* Target Mode */
348 #define RQSTYPE_MODIFY_LUN 0x0c /* Target Mode */
349 #define RQSTYPE_NOTIFY 0x0d /* Target Mode */
350 #define RQSTYPE_NOTIFY_ACK 0x0e /* Target Mode */
351 #define RQSTYPE_CTIO1 0x0f /* Target Mode */
352 #define RQSTYPE_STATUS_CONT 0x10
353 #define RQSTYPE_T2RQS 0x11
354 #define RQSTYPE_CTIO7 0x12
355 #define RQSTYPE_IP_XMIT 0x13
356 #define RQSTYPE_TSK_MGMT 0x14
357 #define RQSTYPE_T4RQS 0x15
358 #define RQSTYPE_ATIO2 0x16 /* Target Mode */
359 #define RQSTYPE_CTIO2 0x17 /* Target Mode */
360 #define RQSTYPE_T7RQS 0x18
361 #define RQSTYPE_T3RQS 0x19
362 #define RQSTYPE_IP_XMIT_64 0x1b
363 #define RQSTYPE_CTIO4 0x1e /* Target Mode */
364 #define RQSTYPE_CTIO3 0x1f /* Target Mode */
365 #define RQSTYPE_RIO1 0x21
366 #define RQSTYPE_RIO2 0x22
367 #define RQSTYPE_IP_RECV 0x23
368 #define RQSTYPE_IP_RECV_CONT 0x24
369 #define RQSTYPE_CT_PASSTHRU 0x29
370 #define RQSTYPE_MS_PASSTHRU 0x29
371 #define RQSTYPE_VP_CTRL 0x30 /* 24XX only */
372 #define RQSTYPE_VP_MODIFY 0x31 /* 24XX only */
373 #define RQSTYPE_RPT_ID_ACQ 0x32 /* 24XX only */
374 #define RQSTYPE_ABORT_IO 0x33
375 #define RQSTYPE_T6RQS 0x48
376 #define RQSTYPE_LOGIN 0x52
377 #define RQSTYPE_ABTS_RCVD 0x54 /* 24XX only */
378 #define RQSTYPE_ABTS_RSP 0x55 /* 24XX only */
379
380
381 #define ISP_RQDSEG 4
382 typedef struct {
383 isphdr_t req_header;
384 uint32_t req_handle;
385 uint8_t req_lun_trn;
386 uint8_t req_target;
387 uint16_t req_cdblen;
388 uint16_t req_flags;
389 uint16_t req_reserved;
390 uint16_t req_time;
391 uint16_t req_seg_count;
392 uint8_t req_cdb[12];
393 ispds_t req_dataseg[ISP_RQDSEG];
394 } ispreq_t;
395 #define ISP_RQDSEG_A64 2
396
397 typedef struct {
398 isphdr_t mrk_header;
399 uint32_t mrk_handle;
400 uint8_t mrk_reserved0;
401 uint8_t mrk_target;
402 uint16_t mrk_modifier;
403 uint16_t mrk_flags;
404 uint16_t mrk_lun;
405 uint8_t mrk_reserved1[48];
406 } isp_marker_t;
407
408 typedef struct {
409 isphdr_t mrk_header;
410 uint32_t mrk_handle;
411 uint16_t mrk_nphdl;
412 uint8_t mrk_modifier;
413 uint8_t mrk_reserved0;
414 uint8_t mrk_reserved1;
415 uint8_t mrk_vphdl;
416 uint16_t mrk_reserved2;
417 uint8_t mrk_lun[8];
418 uint8_t mrk_reserved3[40];
419 } isp_marker_24xx_t;
420
421
422 #define SYNC_DEVICE 0
423 #define SYNC_TARGET 1
424 #define SYNC_ALL 2
425 #define SYNC_LIP 3
426
427 #define ISP_RQDSEG_T2 3
428 typedef struct {
429 isphdr_t req_header;
430 uint32_t req_handle;
431 uint8_t req_lun_trn;
432 uint8_t req_target;
433 uint16_t req_scclun;
434 uint16_t req_flags;
435 uint16_t req_reserved;
436 uint16_t req_time;
437 uint16_t req_seg_count;
438 uint8_t req_cdb[16];
439 uint32_t req_totalcnt;
440 ispds_t req_dataseg[ISP_RQDSEG_T2];
441 } ispreqt2_t;
442
443 typedef struct {
444 isphdr_t req_header;
445 uint32_t req_handle;
446 uint16_t req_target;
447 uint16_t req_scclun;
448 uint16_t req_flags;
449 uint16_t req_reserved;
450 uint16_t req_time;
451 uint16_t req_seg_count;
452 uint8_t req_cdb[16];
453 uint32_t req_totalcnt;
454 ispds_t req_dataseg[ISP_RQDSEG_T2];
455 } ispreqt2e_t;
456
457 #define ISP_RQDSEG_T3 2
458 typedef struct {
459 isphdr_t req_header;
460 uint32_t req_handle;
461 uint8_t req_lun_trn;
462 uint8_t req_target;
463 uint16_t req_scclun;
464 uint16_t req_flags;
465 uint16_t req_reserved;
466 uint16_t req_time;
467 uint16_t req_seg_count;
468 uint8_t req_cdb[16];
469 uint32_t req_totalcnt;
470 ispds64_t req_dataseg[ISP_RQDSEG_T3];
471 } ispreqt3_t;
472 #define ispreq64_t ispreqt3_t /* same as.... */
473
474 typedef struct {
475 isphdr_t req_header;
476 uint32_t req_handle;
477 uint16_t req_target;
478 uint16_t req_scclun;
479 uint16_t req_flags;
480 uint16_t req_reserved;
481 uint16_t req_time;
482 uint16_t req_seg_count;
483 uint8_t req_cdb[16];
484 uint32_t req_totalcnt;
485 ispds64_t req_dataseg[ISP_RQDSEG_T3];
486 } ispreqt3e_t;
487
488 /* req_flag values */
489 #define REQFLAG_NODISCON 0x0001
490 #define REQFLAG_HTAG 0x0002
491 #define REQFLAG_OTAG 0x0004
492 #define REQFLAG_STAG 0x0008
493 #define REQFLAG_TARGET_RTN 0x0010
494
495 #define REQFLAG_NODATA 0x0000
496 #define REQFLAG_DATA_IN 0x0020
497 #define REQFLAG_DATA_OUT 0x0040
498 #define REQFLAG_DATA_UNKNOWN 0x0060
499
500 #define REQFLAG_DISARQ 0x0100
501 #define REQFLAG_FRC_ASYNC 0x0200
502 #define REQFLAG_FRC_SYNC 0x0400
503 #define REQFLAG_FRC_WIDE 0x0800
504 #define REQFLAG_NOPARITY 0x1000
505 #define REQFLAG_STOPQ 0x2000
506 #define REQFLAG_XTRASNS 0x4000
507 #define REQFLAG_PRIORITY 0x8000
508
509 typedef struct {
510 isphdr_t req_header;
511 uint32_t req_handle;
512 uint8_t req_lun_trn;
513 uint8_t req_target;
514 uint16_t req_cdblen;
515 uint16_t req_flags;
516 uint16_t req_reserved;
517 uint16_t req_time;
518 uint16_t req_seg_count;
519 uint8_t req_cdb[44];
520 } ispextreq_t;
521
522 /* 24XX only */
523 typedef struct {
524 uint16_t fcd_length;
525 uint16_t fcd_a1500;
526 uint16_t fcd_a3116;
527 uint16_t fcd_a4732;
528 uint16_t fcd_a6348;
529 } fcp_cmnd_ds_t;
530
531 typedef struct {
532 isphdr_t req_header;
533 uint32_t req_handle;
534 uint16_t req_nphdl;
535 uint16_t req_time;
536 uint16_t req_seg_count;
537 uint16_t req_fc_rsp_dsd_length;
538 uint8_t req_lun[8];
539 uint16_t req_flags;
540 uint16_t req_fc_cmnd_dsd_length;
541 uint16_t req_fc_cmnd_dsd_a1500;
542 uint16_t req_fc_cmnd_dsd_a3116;
543 uint16_t req_fc_cmnd_dsd_a4732;
544 uint16_t req_fc_cmnd_dsd_a6348;
545 uint16_t req_fc_rsp_dsd_a1500;
546 uint16_t req_fc_rsp_dsd_a3116;
547 uint16_t req_fc_rsp_dsd_a4732;
548 uint16_t req_fc_rsp_dsd_a6348;
549 uint32_t req_totalcnt;
550 uint16_t req_tidlo;
551 uint8_t req_tidhi;
552 uint8_t req_vpidx;
553 ispds64_t req_dataseg;
554 } ispreqt6_t;
555
556 typedef struct {
557 isphdr_t req_header;
558 uint32_t req_handle;
559 uint16_t req_nphdl;
560 uint16_t req_time;
561 uint16_t req_seg_count;
562 uint16_t req_reserved;
563 uint8_t req_lun[8];
564 uint8_t req_alen_datadir;
565 uint8_t req_task_management;
566 uint8_t req_task_attribute;
567 uint8_t req_crn;
568 uint8_t req_cdb[16];
569 uint32_t req_dl;
570 uint16_t req_tidlo;
571 uint8_t req_tidhi;
572 uint8_t req_vpidx;
573 ispds64_t req_dataseg;
574 } ispreqt7_t;
575
576 /* Task Management Request Function */
577 typedef struct {
578 isphdr_t tmf_header;
579 uint32_t tmf_handle;
580 uint16_t tmf_nphdl;
581 uint8_t tmf_reserved0[2];
582 uint16_t tmf_delay;
583 uint16_t tmf_timeout;
584 uint8_t tmf_lun[8];
585 uint32_t tmf_flags;
586 uint8_t tmf_reserved1[20];
587 uint16_t tmf_tidlo;
588 uint8_t tmf_tidhi;
589 uint8_t tmf_vpidx;
590 uint8_t tmf_reserved2[12];
591 } isp24xx_tmf_t;
592
593 #define ISP24XX_TMF_NOSEND 0x80000000
594
595 #define ISP24XX_TMF_LUN_RESET 0x00000010
596 #define ISP24XX_TMF_ABORT_TASK_SET 0x00000008
597 #define ISP24XX_TMF_CLEAR_TASK_SET 0x00000004
598 #define ISP24XX_TMF_TARGET_RESET 0x00000002
599 #define ISP24XX_TMF_CLEAR_ACA 0x00000001
600
601 /* I/O Abort Structure */
602 typedef struct {
603 isphdr_t abrt_header;
604 uint32_t abrt_handle;
605 uint16_t abrt_nphdl;
606 uint16_t abrt_options;
607 uint32_t abrt_cmd_handle;
608 uint8_t abrt_reserved[32];
609 uint16_t abrt_tidlo;
610 uint8_t abrt_tidhi;
611 uint8_t abrt_vpidx;
612 uint8_t abrt_reserved1[12];
613 } isp24xx_abrt_t;
614
615 #define ISP24XX_ABRT_NOSEND 0x01 /* don't actually send ABTS */
616 #define ISP24XX_ABRT_OKAY 0x00 /* in nphdl on return */
617 #define ISP24XX_ABRT_ENXIO 0x31 /* in nphdl on return */
618
619 #define ISP_CDSEG 7
620 typedef struct {
621 isphdr_t req_header;
622 uint32_t req_reserved;
623 ispds_t req_dataseg[ISP_CDSEG];
624 } ispcontreq_t;
625
626 #define ISP_CDSEG64 5
627 typedef struct {
628 isphdr_t req_header;
629 ispds64_t req_dataseg[ISP_CDSEG64];
630 } ispcontreq64_t;
631
632 typedef struct {
633 isphdr_t req_header;
634 uint32_t req_handle;
635 uint16_t req_scsi_status;
636 uint16_t req_completion_status;
637 uint16_t req_state_flags;
638 uint16_t req_status_flags;
639 uint16_t req_time;
640 #define req_response_len req_time /* FC only */
641 uint16_t req_sense_len;
642 uint32_t req_resid;
643 uint8_t req_response[8]; /* FC only */
644 uint8_t req_sense_data[32];
645 } ispstatusreq_t;
646
647 /*
648 * Status Continuation
649 */
650 typedef struct {
651 isphdr_t req_header;
652 uint8_t req_sense_data[60];
653 } ispstatus_cont_t;
654
655 /*
656 * 24XX Type 0 status
657 */
658 typedef struct {
659 isphdr_t req_header;
660 uint32_t req_handle;
661 uint16_t req_completion_status;
662 uint16_t req_oxid;
663 uint32_t req_resid;
664 uint16_t req_reserved0;
665 uint16_t req_state_flags;
666 uint16_t req_reserved1;
667 uint16_t req_scsi_status;
668 uint32_t req_fcp_residual;
669 uint32_t req_sense_len;
670 uint32_t req_response_len;
671 uint8_t req_rsp_sense[28];
672 } isp24xx_statusreq_t;
673
674 /*
675 * For Qlogic 2X00, the high order byte of SCSI status has
676 * additional meaning.
677 */
678 #define RQCS_RU 0x800 /* Residual Under */
679 #define RQCS_RO 0x400 /* Residual Over */
680 #define RQCS_RESID (RQCS_RU|RQCS_RO)
681 #define RQCS_SV 0x200 /* Sense Length Valid */
682 #define RQCS_RV 0x100 /* FCP Response Length Valid */
683
684 /*
685 * CT Passthru IOCB
686 */
687 typedef struct {
688 isphdr_t ctp_header;
689 uint32_t ctp_handle;
690 uint16_t ctp_status;
691 uint16_t ctp_nphdl; /* n-port handle */
692 uint16_t ctp_cmd_cnt; /* Command DSD count */
693 uint8_t ctp_vpidx;
694 uint8_t ctp_reserved0;
695 uint16_t ctp_time;
696 uint16_t ctp_reserved1;
697 uint16_t ctp_rsp_cnt; /* Response DSD count */
698 uint16_t ctp_reserved2[5];
699 uint32_t ctp_rsp_bcnt; /* Response byte count */
700 uint32_t ctp_cmd_bcnt; /* Command byte count */
701 ispds64_t ctp_dataseg[2];
702 } isp_ct_pt_t;
703
704 /*
705 * MS Passthru IOCB
706 */
707 typedef struct {
708 isphdr_t ms_header;
709 uint32_t ms_handle;
710 uint16_t ms_nphdl; /* handle in high byte for !2k f/w */
711 uint16_t ms_status;
712 uint16_t ms_flags;
713 uint16_t ms_reserved1; /* low 8 bits */
714 uint16_t ms_time;
715 uint16_t ms_cmd_cnt; /* Command DSD count */
716 uint16_t ms_tot_cnt; /* Total DSD Count */
717 uint8_t ms_type; /* MS type */
718 uint8_t ms_r_ctl; /* R_CTL */
719 uint16_t ms_rxid; /* RX_ID */
720 uint16_t ms_reserved2;
721 uint32_t ms_handle2;
722 uint32_t ms_rsp_bcnt; /* Response byte count */
723 uint32_t ms_cmd_bcnt; /* Command byte count */
724 ispds64_t ms_dataseg[2];
725 } isp_ms_t;
726
727 /*
728 * Completion Status Codes.
729 */
730 #define RQCS_COMPLETE 0x0000
731 #define RQCS_DMA_ERROR 0x0002
732 #define RQCS_RESET_OCCURRED 0x0004
733 #define RQCS_ABORTED 0x0005
734 #define RQCS_TIMEOUT 0x0006
735 #define RQCS_DATA_OVERRUN 0x0007
736 #define RQCS_DATA_UNDERRUN 0x0015
737 #define RQCS_QUEUE_FULL 0x001C
738
739 /* 1X00 Only Completion Codes */
740 #define RQCS_INCOMPLETE 0x0001
741 #define RQCS_TRANSPORT_ERROR 0x0003
742 #define RQCS_COMMAND_OVERRUN 0x0008
743 #define RQCS_STATUS_OVERRUN 0x0009
744 #define RQCS_BAD_MESSAGE 0x000a
745 #define RQCS_NO_MESSAGE_OUT 0x000b
746 #define RQCS_EXT_ID_FAILED 0x000c
747 #define RQCS_IDE_MSG_FAILED 0x000d
748 #define RQCS_ABORT_MSG_FAILED 0x000e
749 #define RQCS_REJECT_MSG_FAILED 0x000f
750 #define RQCS_NOP_MSG_FAILED 0x0010
751 #define RQCS_PARITY_ERROR_MSG_FAILED 0x0011
752 #define RQCS_DEVICE_RESET_MSG_FAILED 0x0012
753 #define RQCS_ID_MSG_FAILED 0x0013
754 #define RQCS_UNEXP_BUS_FREE 0x0014
755 #define RQCS_XACT_ERR1 0x0018
756 #define RQCS_XACT_ERR2 0x0019
757 #define RQCS_XACT_ERR3 0x001A
758 #define RQCS_BAD_ENTRY 0x001B
759 #define RQCS_PHASE_SKIPPED 0x001D
760 #define RQCS_ARQS_FAILED 0x001E
761 #define RQCS_WIDE_FAILED 0x001F
762 #define RQCS_SYNCXFER_FAILED 0x0020
763 #define RQCS_LVD_BUSERR 0x0021
764
765 /* 2X00 Only Completion Codes */
766 #define RQCS_PORT_UNAVAILABLE 0x0028
767 #define RQCS_PORT_LOGGED_OUT 0x0029
768 #define RQCS_PORT_CHANGED 0x002A
769 #define RQCS_PORT_BUSY 0x002B
770
771 /* 24XX Only Completion Codes */
772 #define RQCS_24XX_DRE 0x0011 /* data reassembly error */
773 #define RQCS_24XX_TABORT 0x0013 /* aborted by target */
774 #define RQCS_24XX_ENOMEM 0x002C /* f/w resource unavailable */
775 #define RQCS_24XX_TMO 0x0030 /* task management overrun */
776
777
778 /*
779 * 1X00 specific State Flags
780 */
781 #define RQSF_GOT_BUS 0x0100
782 #define RQSF_GOT_TARGET 0x0200
783 #define RQSF_SENT_CDB 0x0400
784 #define RQSF_XFRD_DATA 0x0800
785 #define RQSF_GOT_STATUS 0x1000
786 #define RQSF_GOT_SENSE 0x2000
787 #define RQSF_XFER_COMPLETE 0x4000
788
789 /*
790 * 2X00 specific State Flags
791 * (same as 1X00 except RQSF_GOT_BUS/RQSF_GOT_TARGET are not available)
792 */
793 #define RQSF_DATA_IN 0x0020
794 #define RQSF_DATA_OUT 0x0040
795 #define RQSF_STAG 0x0008
796 #define RQSF_OTAG 0x0004
797 #define RQSF_HTAG 0x0002
798 /*
799 * 1X00 Status Flags
800 */
801 #define RQSTF_DISCONNECT 0x0001
802 #define RQSTF_SYNCHRONOUS 0x0002
803 #define RQSTF_PARITY_ERROR 0x0004
804 #define RQSTF_BUS_RESET 0x0008
805 #define RQSTF_DEVICE_RESET 0x0010
806 #define RQSTF_ABORTED 0x0020
807 #define RQSTF_TIMEOUT 0x0040
808 #define RQSTF_NEGOTIATION 0x0080
809
810 /*
811 * 2X00 specific state flags
812 */
813 /* RQSF_SENT_CDB */
814 /* RQSF_XFRD_DATA */
815 /* RQSF_GOT_STATUS */
816 /* RQSF_XFER_COMPLETE */
817
818 /*
819 * 2X00 specific status flags
820 */
821 /* RQSTF_ABORTED */
822 /* RQSTF_TIMEOUT */
823 #define RQSTF_DMA_ERROR 0x0080
824 #define RQSTF_LOGOUT 0x2000
825
826 /*
827 * Miscellaneous
828 */
829 #ifndef ISP_EXEC_THROTTLE
830 #define ISP_EXEC_THROTTLE 16
831 #endif
832
833 /*
834 * About Firmware returns an 'attribute' word in mailbox 6.
835 * These attributes are for 2200 and 2300.
836 */
837 #define ISP_FW_ATTR_TMODE 0x0001
838 #define ISP_FW_ATTR_SCCLUN 0x0002
839 #define ISP_FW_ATTR_FABRIC 0x0004
840 #define ISP_FW_ATTR_CLASS2 0x0008
841 #define ISP_FW_ATTR_FCTAPE 0x0010
842 #define ISP_FW_ATTR_IP 0x0020
843 #define ISP_FW_ATTR_VI 0x0040
844 #define ISP_FW_ATTR_VI_SOLARIS 0x0080
845 #define ISP_FW_ATTR_2KLOGINS 0x0100 /* just a guess... */
846
847 /* and these are for the 2400 */
848 #define ISP2400_FW_ATTR_CLASS2 0x0001
849 #define ISP2400_FW_ATTR_IP 0x0002
850 #define ISP2400_FW_ATTR_MULTIID 0x0004
851 #define ISP2400_FW_ATTR_SB2 0x0008
852 #define ISP2400_FW_ATTR_T10CRC 0x0010
853 #define ISP2400_FW_ATTR_VI 0x0020
854 #define ISP2400_FW_ATTR_EXPFW 0x2000
855
856 #define ISP_CAP_TMODE(isp) \
857 (IS_24XX(isp)? 1 : (isp->isp_fwattr & ISP_FW_ATTR_TMODE))
858 #define ISP_CAP_SCCFW(isp) \
859 (IS_24XX(isp)? 1 : (isp->isp_fwattr & ISP_FW_ATTR_SCCLUN))
860 #define ISP_CAP_2KLOGIN(isp) \
861 (IS_24XX(isp)? 1 : (isp->isp_fwattr & ISP_FW_ATTR_2KLOGINS))
862 #define ISP_CAP_MULTI_ID(isp) \
863 (IS_24XX(isp)? (isp->isp_fwattr & ISP2400_FW_ATTR_MULTIID) : 0)
864
865 #define ISP_GET_VPIDX(isp, tag) \
866 (ISP_CAP_MULTI_ID(isp) ? tag : 0)
867
868 /*
869 * Reduced Interrupt Operation Response Queue Entreis
870 */
871
872 typedef struct {
873 isphdr_t req_header;
874 uint32_t req_handles[15];
875 } isp_rio1_t;
876
877 typedef struct {
878 isphdr_t req_header;
879 uint16_t req_handles[30];
880 } isp_rio2_t;
881
882 /*
883 * FC (ISP2100/ISP2200/ISP2300/ISP2400) specific data structures
884 */
885
886 /*
887 * Initialization Control Block
888 *
889 * Version One (prime) format.
890 */
891 typedef struct {
892 uint8_t icb_version;
893 uint8_t icb_reserved0;
894 uint16_t icb_fwoptions;
895 uint16_t icb_maxfrmlen;
896 uint16_t icb_maxalloc;
897 uint16_t icb_execthrottle;
898 uint8_t icb_retry_count;
899 uint8_t icb_retry_delay;
900 uint8_t icb_portname[8];
901 uint16_t icb_hardaddr;
902 uint8_t icb_iqdevtype;
903 uint8_t icb_logintime;
904 uint8_t icb_nodename[8];
905 uint16_t icb_rqstout;
906 uint16_t icb_rspnsin;
907 uint16_t icb_rqstqlen;
908 uint16_t icb_rsltqlen;
909 uint16_t icb_rqstaddr[4];
910 uint16_t icb_respaddr[4];
911 uint16_t icb_lunenables;
912 uint8_t icb_ccnt;
913 uint8_t icb_icnt;
914 uint16_t icb_lunetimeout;
915 uint16_t icb_reserved1;
916 uint16_t icb_xfwoptions;
917 uint8_t icb_racctimer;
918 uint8_t icb_idelaytimer;
919 uint16_t icb_zfwoptions;
920 uint16_t icb_reserved2[13];
921 } isp_icb_t;
922
923 #define ICB_VERSION1 1
924
925 #define ICBOPT_EXTENDED 0x8000
926 #define ICBOPT_BOTH_WWNS 0x4000
927 #define ICBOPT_FULL_LOGIN 0x2000
928 #define ICBOPT_STOP_ON_QFULL 0x1000 /* 2200/2100 only */
929 #define ICBOPT_PREVLOOP 0x0800
930 #define ICBOPT_SRCHDOWN 0x0400
931 #define ICBOPT_NOLIP 0x0200
932 #define ICBOPT_PDBCHANGE_AE 0x0100
933 #define ICBOPT_INI_TGTTYPE 0x0080
934 #define ICBOPT_INI_ADISC 0x0040
935 #define ICBOPT_INI_DISABLE 0x0020
936 #define ICBOPT_TGT_ENABLE 0x0010
937 #define ICBOPT_FAST_POST 0x0008
938 #define ICBOPT_FULL_DUPLEX 0x0004
939 #define ICBOPT_FAIRNESS 0x0002
940 #define ICBOPT_HARD_ADDRESS 0x0001
941
942 #define ICBXOPT_NO_LOGOUT 0x8000 /* no logout on link failure */
943 #define ICBXOPT_FCTAPE_CCQ 0x4000 /* FC-Tape Command Queueing */
944 #define ICBXOPT_FCTAPE_CONFIRM 0x2000
945 #define ICBXOPT_FCTAPE 0x1000
946 #define ICBXOPT_CLASS2_ACK0 0x0200
947 #define ICBXOPT_CLASS2 0x0100
948 #define ICBXOPT_NO_PLAY 0x0080 /* don't play if can't get hard addr */
949 #define ICBXOPT_TOPO_MASK 0x0070
950 #define ICBXOPT_LOOP_ONLY 0x0000
951 #define ICBXOPT_PTP_ONLY 0x0010
952 #define ICBXOPT_LOOP_2_PTP 0x0020
953 #define ICBXOPT_PTP_2_LOOP 0x0030
954 /*
955 * The lower 4 bits of the xfwoptions field are the OPERATION MODE bits.
956 * RIO is not defined for the 23XX cards (just 2200)
957 */
958 #define ICBXOPT_RIO_OFF 0
959 #define ICBXOPT_RIO_16BIT 1
960 #define ICBXOPT_RIO_32BIT 2
961 #define ICBXOPT_RIO_16BIT_IOCB 3
962 #define ICBXOPT_RIO_32BIT_IOCB 4
963 #define ICBXOPT_ZIO 5
964 #define ICBXOPT_TIMER_MASK 0x7
965
966 #define ICBZOPT_RATE_MASK 0xC000
967 #define ICBZOPT_RATE_ONEGB 0x0000
968 #define ICBZOPT_RATE_AUTO 0x8000
969 #define ICBZOPT_RATE_TWOGB 0x4000
970 #define ICBZOPT_50_OHM 0x2000
971 #define ICBZOPT_ENA_OOF 0x0040 /* out of order frame handling */
972 #define ICBZOPT_RSPSZ_MASK 0x0030
973 #define ICBZOPT_RSPSZ_24 0x0000
974 #define ICBZOPT_RSPSZ_12 0x0010
975 #define ICBZOPT_RSPSZ_24A 0x0020
976 #define ICBZOPT_RSPSZ_32 0x0030
977 #define ICBZOPT_SOFTID 0x0002
978 #define ICBZOPT_ENA_RDXFR_RDY 0x0001
979
980 /* 2400 F/W options */
981 #define ICB2400_OPT1_BOTH_WWNS 0x00004000
982 #define ICB2400_OPT1_FULL_LOGIN 0x00002000
983 #define ICB2400_OPT1_PREVLOOP 0x00000800
984 #define ICB2400_OPT1_SRCHDOWN 0x00000400
985 #define ICB2400_OPT1_NOLIP 0x00000200
986 #define ICB2400_OPT1_INI_DISABLE 0x00000020
987 #define ICB2400_OPT1_TGT_ENABLE 0x00000010
988 #define ICB2400_OPT1_FULL_DUPLEX 0x00000004
989 #define ICB2400_OPT1_FAIRNESS 0x00000002
990 #define ICB2400_OPT1_HARD_ADDRESS 0x00000001
991
992 #define ICB2400_OPT2_FCTAPE 0x00001000
993 #define ICB2400_OPT2_CLASS2_ACK0 0x00000200
994 #define ICB2400_OPT2_CLASS2 0x00000100
995 #define ICB2400_OPT2_NO_PLAY 0x00000080
996 #define ICB2400_OPT2_TOPO_MASK 0x00000070
997 #define ICB2400_OPT2_LOOP_ONLY 0x00000000
998 #define ICB2400_OPT2_PTP_ONLY 0x00000010
999 #define ICB2400_OPT2_LOOP_2_PTP 0x00000020
1000 #define ICB2400_OPT2_PTP_2_LOOP 0x00000030
1001 #define ICB2400_OPT2_TIMER_MASK 0x00000007
1002 #define ICB2400_OPT2_ZIO 0x00000005
1003 #define ICB2400_OPT2_ZIO1 0x00000006
1004
1005 #define ICB2400_OPT3_75_OHM 0x00010000
1006 #define ICB2400_OPT3_RATE_MASK 0x0000E000
1007 #define ICB2400_OPT3_RATE_ONEGB 0x00000000
1008 #define ICB2400_OPT3_RATE_TWOGB 0x00002000
1009 #define ICB2400_OPT3_RATE_AUTO 0x00004000
1010 #define ICB2400_OPT3_RATE_FOURGB 0x00006000
1011 #define ICB2400_OPT3_RATE_EIGHTGB 0x00008000
1012 #define ICB2400_OPT3_ENA_OOF_XFRDY 0x00000200
1013 #define ICB2400_OPT3_NO_LOCAL_PLOGI 0x00000080
1014 #define ICB2400_OPT3_ENA_OOF 0x00000040
1015 /* note that a response size flag of zero is reserved! */
1016 #define ICB2400_OPT3_RSPSZ_MASK 0x00000030
1017 #define ICB2400_OPT3_RSPSZ_12 0x00000010
1018 #define ICB2400_OPT3_RSPSZ_24 0x00000020
1019 #define ICB2400_OPT3_RSPSZ_32 0x00000030
1020 #define ICB2400_OPT3_SOFTID 0x00000002
1021
1022 #define ICB_MIN_FRMLEN 256
1023 #define ICB_MAX_FRMLEN 2112
1024 #define ICB_DFLT_FRMLEN 1024
1025 #define ICB_DFLT_ALLOC 256
1026 #define ICB_DFLT_THROTTLE 16
1027 #define ICB_DFLT_RDELAY 5
1028 #define ICB_DFLT_RCOUNT 3
1029
1030 #define ICB_LOGIN_TOV 30
1031 #define ICB_LUN_ENABLE_TOV 180
1032
1033
1034 /*
1035 * And somebody at QLogic had a great idea that you could just change
1036 * the structure *and* keep the version number the same as the other cards.
1037 */
1038 typedef struct {
1039 uint16_t icb_version;
1040 uint16_t icb_reserved0;
1041 uint16_t icb_maxfrmlen;
1042 uint16_t icb_execthrottle;
1043 uint16_t icb_xchgcnt;
1044 uint16_t icb_hardaddr;
1045 uint8_t icb_portname[8];
1046 uint8_t icb_nodename[8];
1047 uint16_t icb_rspnsin;
1048 uint16_t icb_rqstout;
1049 uint16_t icb_retry_count;
1050 uint16_t icb_priout;
1051 uint16_t icb_rsltqlen;
1052 uint16_t icb_rqstqlen;
1053 uint16_t icb_ldn_nols;
1054 uint16_t icb_prqstqlen;
1055 uint16_t icb_rqstaddr[4];
1056 uint16_t icb_respaddr[4];
1057 uint16_t icb_priaddr[4];
1058 uint16_t icb_reserved1[4];
1059 uint16_t icb_atio_in;
1060 uint16_t icb_atioqlen;
1061 uint16_t icb_atioqaddr[4];
1062 uint16_t icb_idelaytimer;
1063 uint16_t icb_logintime;
1064 uint32_t icb_fwoptions1;
1065 uint32_t icb_fwoptions2;
1066 uint32_t icb_fwoptions3;
1067 uint16_t icb_reserved2[12];
1068 } isp_icb_2400_t;
1069
1070 #define RQRSP_ADDR0015 0
1071 #define RQRSP_ADDR1631 1
1072 #define RQRSP_ADDR3247 2
1073 #define RQRSP_ADDR4863 3
1074
1075
1076 #define ICB_NNM0 7
1077 #define ICB_NNM1 6
1078 #define ICB_NNM2 5
1079 #define ICB_NNM3 4
1080 #define ICB_NNM4 3
1081 #define ICB_NNM5 2
1082 #define ICB_NNM6 1
1083 #define ICB_NNM7 0
1084
1085 #define MAKE_NODE_NAME_FROM_WWN(array, wwn) \
1086 array[ICB_NNM0] = (uint8_t) ((wwn >> 0) & 0xff), \
1087 array[ICB_NNM1] = (uint8_t) ((wwn >> 8) & 0xff), \
1088 array[ICB_NNM2] = (uint8_t) ((wwn >> 16) & 0xff), \
1089 array[ICB_NNM3] = (uint8_t) ((wwn >> 24) & 0xff), \
1090 array[ICB_NNM4] = (uint8_t) ((wwn >> 32) & 0xff), \
1091 array[ICB_NNM5] = (uint8_t) ((wwn >> 40) & 0xff), \
1092 array[ICB_NNM6] = (uint8_t) ((wwn >> 48) & 0xff), \
1093 array[ICB_NNM7] = (uint8_t) ((wwn >> 56) & 0xff)
1094
1095 #define MAKE_WWN_FROM_NODE_NAME(wwn, array) \
1096 wwn = ((uint64_t) array[ICB_NNM0]) | \
1097 ((uint64_t) array[ICB_NNM1] << 8) | \
1098 ((uint64_t) array[ICB_NNM2] << 16) | \
1099 ((uint64_t) array[ICB_NNM3] << 24) | \
1100 ((uint64_t) array[ICB_NNM4] << 32) | \
1101 ((uint64_t) array[ICB_NNM5] << 40) | \
1102 ((uint64_t) array[ICB_NNM6] << 48) | \
1103 ((uint64_t) array[ICB_NNM7] << 56)
1104
1105
1106 /*
1107 * For MULTI_ID firmware, this describes a
1108 * virtual port entity for getting status.
1109 */
1110 typedef struct {
1111 uint16_t vp_port_status;
1112 uint8_t vp_port_options;
1113 uint8_t vp_port_loopid;
1114 uint8_t vp_port_portname[8];
1115 uint8_t vp_port_nodename[8];
1116 uint16_t vp_port_portid_lo; /* not present when trailing icb */
1117 uint16_t vp_port_portid_hi; /* not present when trailing icb */
1118 } vp_port_info_t;
1119
1120 #define ICB2400_VPOPT_TGT_DISABLE 0x00000020 /* disable target mode */
1121 #define ICB2400_VPOPT_INI_ENABLE 0x00000010 /* enable initiator mode */
1122 #define ICB2400_VPOPT_ENABLED 0x00000008
1123 #define ICB2400_VPOPT_NOPLAY 0x00000004
1124 #define ICB2400_VPOPT_PREVLOOP 0x00000002
1125 #define ICB2400_VPOPT_HARD_ADDRESS 0x00000001
1126
1127 #define ICB2400_VPOPT_WRITE_SIZE 20
1128
1129 /*
1130 * For MULTI_ID firmware, we append this structure
1131 * to the isp_icb_2400_t above, followed by a list
1132 * structures that are *most* of the vp_port_info_t.
1133 */
1134 typedef struct {
1135 uint16_t vp_count;
1136 uint16_t vp_global_options;
1137 } isp_icb_2400_vpinfo_t;
1138
1139 #define ICB2400_VPINFO_OFF 0x80 /* offset from start of ICB */
1140 #define ICB2400_VPINFO_PORT_OFF(chan) \
1141 ICB2400_VPINFO_OFF + \
1142 sizeof (isp_icb_2400_vpinfo_t) + ((chan - 1) * ICB2400_VPOPT_WRITE_SIZE)
1143
1144 #define ICB2400_VPGOPT_MID_DISABLE 0x02
1145
1146 typedef struct {
1147 isphdr_t vp_ctrl_hdr;
1148 uint32_t vp_ctrl_handle;
1149 uint16_t vp_ctrl_index_fail;
1150 uint16_t vp_ctrl_status;
1151 uint16_t vp_ctrl_command;
1152 uint16_t vp_ctrl_vp_count;
1153 uint16_t vp_ctrl_idmap[8];
1154 uint8_t vp_ctrl_reserved[32];
1155 } vp_ctrl_info_t;
1156
1157 #define VP_CTRL_CMD_ENABLE_VP 0
1158 #define VP_CTRL_CMD_DISABLE_VP 8
1159 #define VP_CTRL_CMD_DISABLE_VP_REINIT_LINK 9
1160 #define VP_CTRL_CMD_DISABLE_VP_LOGO 0xA
1161
1162 /*
1163 * We can use this structure for modifying either one or two VP ports after initialization
1164 */
1165 typedef struct {
1166 isphdr_t vp_mod_hdr;
1167 uint32_t vp_mod_hdl;
1168 uint16_t vp_mod_reserved0;
1169 uint16_t vp_mod_status;
1170 uint8_t vp_mod_cmd;
1171 uint8_t vp_mod_cnt;
1172 uint8_t vp_mod_idx0;
1173 uint8_t vp_mod_idx1;
1174 struct {
1175 uint8_t options;
1176 uint8_t loopid;
1177 uint16_t reserved1;
1178 uint8_t wwpn[8];
1179 uint8_t wwnn[8];
1180 } vp_mod_ports[2];
1181 uint8_t vp_mod_reserved2[8];
1182 } vp_modify_t;
1183
1184 #define VP_STS_OK 0x00
1185 #define VP_STS_ERR 0x01
1186 #define VP_CNT_ERR 0x02
1187 #define VP_GEN_ERR 0x03
1188 #define VP_IDX_ERR 0x04
1189 #define VP_STS_BSY 0x05
1190
1191 #define VP_MODIFY_VP 0x00
1192 #define VP_MODIFY_ENA 0x01
1193
1194 /*
1195 * Port Data Base Element
1196 */
1197
1198 typedef struct {
1199 uint16_t pdb_options;
1200 uint8_t pdb_mstate;
1201 uint8_t pdb_sstate;
1202 uint8_t pdb_hardaddr_bits[4];
1203 uint8_t pdb_portid_bits[4];
1204 uint8_t pdb_nodename[8];
1205 uint8_t pdb_portname[8];
1206 uint16_t pdb_execthrottle;
1207 uint16_t pdb_exec_count;
1208 uint8_t pdb_retry_count;
1209 uint8_t pdb_retry_delay;
1210 uint16_t pdb_resalloc;
1211 uint16_t pdb_curalloc;
1212 uint16_t pdb_qhead;
1213 uint16_t pdb_qtail;
1214 uint16_t pdb_tl_next;
1215 uint16_t pdb_tl_last;
1216 uint16_t pdb_features; /* PLOGI, Common Service */
1217 uint16_t pdb_pconcurrnt; /* PLOGI, Common Service */
1218 uint16_t pdb_roi; /* PLOGI, Common Service */
1219 uint8_t pdb_target;
1220 uint8_t pdb_initiator; /* PLOGI, Class 3 Control Flags */
1221 uint16_t pdb_rdsiz; /* PLOGI, Class 3 */
1222 uint16_t pdb_ncseq; /* PLOGI, Class 3 */
1223 uint16_t pdb_noseq; /* PLOGI, Class 3 */
1224 uint16_t pdb_labrtflg;
1225 uint16_t pdb_lstopflg;
1226 uint16_t pdb_sqhead;
1227 uint16_t pdb_sqtail;
1228 uint16_t pdb_ptimer;
1229 uint16_t pdb_nxt_seqid;
1230 uint16_t pdb_fcount;
1231 uint16_t pdb_prli_len;
1232 uint16_t pdb_prli_svc0;
1233 uint16_t pdb_prli_svc3;
1234 uint16_t pdb_loopid;
1235 uint16_t pdb_il_ptr;
1236 uint16_t pdb_sl_ptr;
1237 } isp_pdb_21xx_t;
1238
1239 #define PDB_OPTIONS_XMITTING (1<<11)
1240 #define PDB_OPTIONS_LNKXMIT (1<<10)
1241 #define PDB_OPTIONS_ABORTED (1<<9)
1242 #define PDB_OPTIONS_ADISC (1<<1)
1243
1244 #define PDB_STATE_DISCOVERY 0
1245 #define PDB_STATE_WDISC_ACK 1
1246 #define PDB_STATE_PLOGI 2
1247 #define PDB_STATE_PLOGI_ACK 3
1248 #define PDB_STATE_PRLI 4
1249 #define PDB_STATE_PRLI_ACK 5
1250 #define PDB_STATE_LOGGED_IN 6
1251 #define PDB_STATE_PORT_UNAVAIL 7
1252 #define PDB_STATE_PRLO 8
1253 #define PDB_STATE_PRLO_ACK 9
1254 #define PDB_STATE_PLOGO 10
1255 #define PDB_STATE_PLOG_ACK 11
1256
1257 #define SVC3_TGT_ROLE 0x10
1258 #define SVC3_INI_ROLE 0x20
1259 #define SVC3_ROLE_MASK 0x30
1260 #define SVC3_ROLE_SHIFT 4
1261
1262 #define BITS2WORD(x) ((x)[0] << 16 | (x)[3] << 8 | (x)[2])
1263 #define BITS2WORD_24XX(x) ((x)[0] << 16 | (x)[1] << 8 | (x)[2])
1264
1265 /*
1266 * Port Data Base Element- 24XX cards
1267 */
1268 typedef struct {
1269 uint16_t pdb_flags;
1270 uint8_t pdb_curstate;
1271 uint8_t pdb_laststate;
1272 uint8_t pdb_hardaddr_bits[4];
1273 uint8_t pdb_portid_bits[4];
1274 #define pdb_nxt_seqid_2400 pdb_portid_bits[3]
1275 uint16_t pdb_retry_timer;
1276 uint16_t pdb_handle;
1277 uint16_t pdb_rcv_dsize;
1278 uint16_t pdb_reserved0;
1279 uint16_t pdb_prli_svc0;
1280 uint16_t pdb_prli_svc3;
1281 uint8_t pdb_portname[8];
1282 uint8_t pdb_nodename[8];
1283 uint8_t pdb_reserved1[24];
1284 } isp_pdb_24xx_t;
1285
1286 #define PDB2400_TID_SUPPORTED 0x4000
1287 #define PDB2400_FC_TAPE 0x0080
1288 #define PDB2400_CLASS2_ACK0 0x0040
1289 #define PDB2400_FCP_CONF 0x0020
1290 #define PDB2400_CLASS2 0x0010
1291 #define PDB2400_ADDR_VALID 0x0002
1292
1293 #define PDB2400_STATE_PLOGI_PEND 0x03
1294 #define PDB2400_STATE_PLOGI_DONE 0x04
1295 #define PDB2400_STATE_PRLI_PEND 0x05
1296 #define PDB2400_STATE_LOGGED_IN 0x06
1297 #define PDB2400_STATE_PORT_UNAVAIL 0x07
1298 #define PDB2400_STATE_PRLO_PEND 0x09
1299 #define PDB2400_STATE_LOGO_PEND 0x0B
1300
1301 /*
1302 * Common elements from the above two structures that are actually useful to us.
1303 */
1304 typedef struct {
1305 uint16_t handle;
1306 uint16_t reserved;
1307 uint32_t s3_role : 8,
1308 portid : 24;
1309 uint8_t portname[8];
1310 uint8_t nodename[8];
1311 } isp_pdb_t;
1312
1313 /*
1314 * Port Database Changed Async Event information for 24XX cards
1315 */
1316 #define PDB24XX_AE_OK 0x00
1317 #define PDB24XX_AE_IMPL_LOGO_1 0x01
1318 #define PDB24XX_AE_IMPL_LOGO_2 0x02
1319 #define PDB24XX_AE_IMPL_LOGO_3 0x03
1320 #define PDB24XX_AE_PLOGI_RCVD 0x04
1321 #define PDB24XX_AE_PLOGI_RJT 0x05
1322 #define PDB24XX_AE_PRLI_RCVD 0x06
1323 #define PDB24XX_AE_PRLI_RJT 0x07
1324 #define PDB24XX_AE_TPRLO 0x08
1325 #define PDB24XX_AE_TPRLO_RJT 0x09
1326 #define PDB24XX_AE_PRLO_RCVD 0x0a
1327 #define PDB24XX_AE_LOGO_RCVD 0x0b
1328 #define PDB24XX_AE_TOPO_CHG 0x0c
1329 #define PDB24XX_AE_NPORT_CHG 0x0d
1330 #define PDB24XX_AE_FLOGI_RJT 0x0e
1331 #define PDB24XX_AE_BAD_FANN 0x0f
1332 #define PDB24XX_AE_FLOGI_TIMO 0x10
1333 #define PDB24XX_AE_ABX_LOGO 0x11
1334 #define PDB24XX_AE_PLOGI_DONE 0x12
1335 #define PDB24XX_AE_PRLI_DONJE 0x13
1336 #define PDB24XX_AE_OPN_1 0x14
1337 #define PDB24XX_AE_OPN_2 0x15
1338 #define PDB24XX_AE_TXERR 0x16
1339 #define PDB24XX_AE_FORCED_LOGO 0x17
1340 #define PDB24XX_AE_DISC_TIMO 0x18
1341
1342 /*
1343 * Genericized Port Login/Logout software structure
1344 */
1345 typedef struct {
1346 uint16_t handle;
1347 uint16_t channel;
1348 uint32_t
1349 flags : 8,
1350 portid : 24;
1351 } isp_plcmd_t;
1352 /* the flags to use are those for PLOGX_FLG_* below */
1353
1354 /*
1355 * ISP24XX- Login/Logout Port IOCB
1356 */
1357 typedef struct {
1358 isphdr_t plogx_header;
1359 uint32_t plogx_handle;
1360 uint16_t plogx_status;
1361 uint16_t plogx_nphdl;
1362 uint16_t plogx_flags;
1363 uint16_t plogx_vphdl; /* low 8 bits */
1364 uint16_t plogx_portlo; /* low 16 bits */
1365 uint16_t plogx_rspsz_porthi;
1366 struct {
1367 uint16_t lo16;
1368 uint16_t hi16;
1369 } plogx_ioparm[11];
1370 } isp_plogx_t;
1371
1372 #define PLOGX_STATUS_OK 0x00
1373 #define PLOGX_STATUS_UNAVAIL 0x28
1374 #define PLOGX_STATUS_LOGOUT 0x29
1375 #define PLOGX_STATUS_IOCBERR 0x31
1376
1377 #define PLOGX_IOCBERR_NOLINK 0x01
1378 #define PLOGX_IOCBERR_NOIOCB 0x02
1379 #define PLOGX_IOCBERR_NOXGHG 0x03
1380 #define PLOGX_IOCBERR_FAILED 0x04 /* further info in IOPARM 1 */
1381 #define PLOGX_IOCBERR_NOFABRIC 0x05
1382 #define PLOGX_IOCBERR_NOTREADY 0x07
1383 #define PLOGX_IOCBERR_NOLOGIN 0x08 /* further info in IOPARM 1 */
1384 #define PLOGX_IOCBERR_NOPCB 0x0a
1385 #define PLOGX_IOCBERR_REJECT 0x18 /* further info in IOPARM 1 */
1386 #define PLOGX_IOCBERR_EINVAL 0x19 /* further info in IOPARM 1 */
1387 #define PLOGX_IOCBERR_PORTUSED 0x1a /* further info in IOPARM 1 */
1388 #define PLOGX_IOCBERR_HNDLUSED 0x1b /* further info in IOPARM 1 */
1389 #define PLOGX_IOCBERR_NOHANDLE 0x1c
1390 #define PLOGX_IOCBERR_NOFLOGI 0x1f /* further info in IOPARM 1 */
1391
1392 #define PLOGX_FLG_CMD_MASK 0xf
1393 #define PLOGX_FLG_CMD_PLOGI 0
1394 #define PLOGX_FLG_CMD_PRLI 1
1395 #define PLOGX_FLG_CMD_PDISC 2
1396 #define PLOGX_FLG_CMD_LOGO 8
1397 #define PLOGX_FLG_CMD_PRLO 9
1398 #define PLOGX_FLG_CMD_TPRLO 10
1399
1400 #define PLOGX_FLG_COND_PLOGI 0x10 /* if with PLOGI */
1401 #define PLOGX_FLG_IMPLICIT 0x10 /* if with LOGO, PRLO, TPRLO */
1402 #define PLOGX_FLG_SKIP_PRLI 0x20 /* if with PLOGI */
1403 #define PLOGX_FLG_IMPLICIT_LOGO_ALL 0x20 /* if with LOGO */
1404 #define PLOGX_FLG_EXPLICIT_LOGO 0x40 /* if with LOGO */
1405 #define PLOGX_FLG_COMMON_FEATURES 0x80 /* if with PLOGI */
1406 #define PLOGX_FLG_FREE_NPHDL 0x80 /* if with with LOGO */
1407
1408 #define PLOGX_FLG_CLASS2 0x100 /* if with PLOGI */
1409 #define PLOGX_FLG_FCP2_OVERRIDE 0x200 /* if with PRLOG, PRLI */
1410
1411 /*
1412 * Report ID Acquisistion (24XX multi-id firmware)
1413 */
1414 typedef struct {
1415 isphdr_t ridacq_hdr;
1416 uint32_t ridacq_handle;
1417 union {
1418 struct {
1419 uint8_t ridacq_vp_acquired;
1420 uint8_t ridacq_vp_setup;
1421 uint16_t ridacq_reserved0;
1422 } type0; /* type 0 */
1423 struct {
1424 uint16_t ridacq_vp_count;
1425 uint8_t ridacq_vp_index;
1426 uint8_t ridacq_vp_status;
1427 } type1; /* type 1 */
1428 } un;
1429 uint16_t ridacq_vp_port_lo;
1430 uint8_t ridacq_vp_port_hi;
1431 uint8_t ridacq_format; /* 0 or 1 */
1432 uint16_t ridacq_map[8];
1433 uint8_t ridacq_reserved1[32];
1434 } isp_ridacq_t;
1435
1436 #define RIDACQ_STS_COMPLETE 0
1437 #define RIDACQ_STS_UNACQUIRED 1
1438 #define RIDACQ_STS_CHANGED 20
1439
1440
1441 /*
1442 * Simple Name Server Data Structures
1443 */
1444 #define SNS_GA_NXT 0x100
1445 #define SNS_GPN_ID 0x112
1446 #define SNS_GNN_ID 0x113
1447 #define SNS_GFF_ID 0x11F
1448 #define SNS_GID_FT 0x171
1449 #define SNS_RFT_ID 0x217
1450 typedef struct {
1451 uint16_t snscb_rblen; /* response buffer length (words) */
1452 uint16_t snscb_reserved0;
1453 uint16_t snscb_addr[4]; /* response buffer address */
1454 uint16_t snscb_sblen; /* subcommand buffer length (words) */
1455 uint16_t snscb_reserved1;
1456 uint16_t snscb_data[1]; /* variable data */
1457 } sns_screq_t; /* Subcommand Request Structure */
1458
1459 typedef struct {
1460 uint16_t snscb_rblen; /* response buffer length (words) */
1461 uint16_t snscb_reserved0;
1462 uint16_t snscb_addr[4]; /* response buffer address */
1463 uint16_t snscb_sblen; /* subcommand buffer length (words) */
1464 uint16_t snscb_reserved1;
1465 uint16_t snscb_cmd;
1466 uint16_t snscb_reserved2;
1467 uint32_t snscb_reserved3;
1468 uint32_t snscb_port;
1469 } sns_ga_nxt_req_t;
1470 #define SNS_GA_NXT_REQ_SIZE (sizeof (sns_ga_nxt_req_t))
1471
1472 typedef struct {
1473 uint16_t snscb_rblen; /* response buffer length (words) */
1474 uint16_t snscb_reserved0;
1475 uint16_t snscb_addr[4]; /* response buffer address */
1476 uint16_t snscb_sblen; /* subcommand buffer length (words) */
1477 uint16_t snscb_reserved1;
1478 uint16_t snscb_cmd;
1479 uint16_t snscb_reserved2;
1480 uint32_t snscb_reserved3;
1481 uint32_t snscb_portid;
1482 } sns_gxn_id_req_t;
1483 #define SNS_GXN_ID_REQ_SIZE (sizeof (sns_gxn_id_req_t))
1484
1485 typedef struct {
1486 uint16_t snscb_rblen; /* response buffer length (words) */
1487 uint16_t snscb_reserved0;
1488 uint16_t snscb_addr[4]; /* response buffer address */
1489 uint16_t snscb_sblen; /* subcommand buffer length (words) */
1490 uint16_t snscb_reserved1;
1491 uint16_t snscb_cmd;
1492 uint16_t snscb_mword_div_2;
1493 uint32_t snscb_reserved3;
1494 uint32_t snscb_fc4_type;
1495 } sns_gid_ft_req_t;
1496 #define SNS_GID_FT_REQ_SIZE (sizeof (sns_gid_ft_req_t))
1497
1498 typedef struct {
1499 uint16_t snscb_rblen; /* response buffer length (words) */
1500 uint16_t snscb_reserved0;
1501 uint16_t snscb_addr[4]; /* response buffer address */
1502 uint16_t snscb_sblen; /* subcommand buffer length (words) */
1503 uint16_t snscb_reserved1;
1504 uint16_t snscb_cmd;
1505 uint16_t snscb_reserved2;
1506 uint32_t snscb_reserved3;
1507 uint32_t snscb_port;
1508 uint32_t snscb_fc4_types[8];
1509 } sns_rft_id_req_t;
1510 #define SNS_RFT_ID_REQ_SIZE (sizeof (sns_rft_id_req_t))
1511
1512 typedef struct {
1513 ct_hdr_t snscb_cthdr;
1514 uint8_t snscb_port_type;
1515 uint8_t snscb_port_id[3];
1516 uint8_t snscb_portname[8];
1517 uint16_t snscb_data[1]; /* variable data */
1518 } sns_scrsp_t; /* Subcommand Response Structure */
1519
1520 typedef struct {
1521 ct_hdr_t snscb_cthdr;
1522 uint8_t snscb_port_type;
1523 uint8_t snscb_port_id[3];
1524 uint8_t snscb_portname[8];
1525 uint8_t snscb_pnlen; /* symbolic port name length */
1526 uint8_t snscb_pname[255]; /* symbolic port name */
1527 uint8_t snscb_nodename[8];
1528 uint8_t snscb_nnlen; /* symbolic node name length */
1529 uint8_t snscb_nname[255]; /* symbolic node name */
1530 uint8_t snscb_ipassoc[8];
1531 uint8_t snscb_ipaddr[16];
1532 uint8_t snscb_svc_class[4];
1533 uint8_t snscb_fc4_types[32];
1534 uint8_t snscb_fpname[8];
1535 uint8_t snscb_reserved;
1536 uint8_t snscb_hardaddr[3];
1537 } sns_ga_nxt_rsp_t; /* Subcommand Response Structure */
1538 #define SNS_GA_NXT_RESP_SIZE (sizeof (sns_ga_nxt_rsp_t))
1539
1540 typedef struct {
1541 ct_hdr_t snscb_cthdr;
1542 uint8_t snscb_wwn[8];
1543 } sns_gxn_id_rsp_t;
1544 #define SNS_GXN_ID_RESP_SIZE (sizeof (sns_gxn_id_rsp_t))
1545
1546 typedef struct {
1547 ct_hdr_t snscb_cthdr;
1548 uint32_t snscb_fc4_features[32];
1549 } sns_gff_id_rsp_t;
1550 #define SNS_GFF_ID_RESP_SIZE (sizeof (sns_gff_id_rsp_t))
1551
1552 typedef struct {
1553 ct_hdr_t snscb_cthdr;
1554 struct {
1555 uint8_t control;
1556 uint8_t portid[3];
1557 } snscb_ports[1];
1558 } sns_gid_ft_rsp_t;
1559 #define SNS_GID_FT_RESP_SIZE(x) ((sizeof (sns_gid_ft_rsp_t)) + ((x - 1) << 2))
1560 #define SNS_RFT_ID_RESP_SIZE (sizeof (ct_hdr_t))
1561
1562 /*
1563 * Other Misc Structures
1564 */
1565
1566 /* ELS Pass Through */
1567 typedef struct {
1568 isphdr_t els_hdr;
1569 uint32_t els_handle;
1570 uint16_t els_status;
1571 uint16_t els_nphdl;
1572 uint16_t els_xmit_dsd_count; /* outgoing only */
1573 uint8_t els_vphdl;
1574 uint8_t els_sof;
1575 uint32_t els_rxid;
1576 uint16_t els_recv_dsd_count; /* outgoing only */
1577 uint8_t els_opcode;
1578 uint8_t els_reserved1;
1579 uint8_t els_did_lo;
1580 uint8_t els_did_mid;
1581 uint8_t els_did_hi;
1582 uint8_t els_reserved2;
1583 uint16_t els_reserved3;
1584 uint16_t els_ctl_flags;
1585 union {
1586 struct {
1587 uint32_t _els_bytecnt;
1588 uint32_t _els_subcode1;
1589 uint32_t _els_subcode2;
1590 uint8_t _els_reserved4[20];
1591 } in;
1592 struct {
1593 uint32_t _els_recv_bytecnt;
1594 uint32_t _els_xmit_bytecnt;
1595 uint32_t _els_xmit_dsd_length;
1596 uint16_t _els_xmit_dsd_a1500;
1597 uint16_t _els_xmit_dsd_a3116;
1598 uint16_t _els_xmit_dsd_a4732;
1599 uint16_t _els_xmit_dsd_a6348;
1600 uint32_t _els_recv_dsd_length;
1601 uint16_t _els_recv_dsd_a1500;
1602 uint16_t _els_recv_dsd_a3116;
1603 uint16_t _els_recv_dsd_a4732;
1604 uint16_t _els_recv_dsd_a6348;
1605 } out;
1606 } inout;
1607 #define els_bytecnt inout.in._els_bytecnt
1608 #define els_subcode1 inout.in._els_subcode1
1609 #define els_subcode2 inout.in._els_subcode2
1610 #define els_reserved4 inout.in._els_reserved4
1611 #define els_recv_bytecnt inout.out._els_recv_bytecnt
1612 #define els_xmit_bytecnt inout.out._els_xmit_bytecnt
1613 #define els_xmit_dsd_length inout.out._els_xmit_dsd_length
1614 #define els_xmit_dsd_a1500 inout.out._els_xmit_dsd_a1500
1615 #define els_xmit_dsd_a3116 inout.out._els_xmit_dsd_a3116
1616 #define els_xmit_dsd_a4732 inout.out._els_xmit_dsd_a4732
1617 #define els_xmit_dsd_a6348 inout.out._els_xmit_dsd_a6348
1618 #define els_recv_dsd_length inout.out._els_recv_dsd_length
1619 #define els_recv_dsd_a1500 inout.out._els_recv_dsd_a1500
1620 #define els_recv_dsd_a3116 inout.out._els_recv_dsd_a3116
1621 #define els_recv_dsd_a4732 inout.out._els_recv_dsd_a4732
1622 #define els_recv_dsd_a6348 inout.out._els_recv_dsd_a6348
1623 } els_t;
1624
1625 /*
1626 * A handy package structure for running FC-SCSI commands internally
1627 */
1628 typedef struct {
1629 uint16_t handle;
1630 uint16_t lun;
1631 uint32_t
1632 channel : 8,
1633 portid : 24;
1634 uint32_t timeout;
1635 union {
1636 struct {
1637 uint32_t data_length;
1638 uint32_t
1639 no_wait : 1,
1640 do_read : 1;
1641 uint8_t cdb[16];
1642 void *data_ptr;
1643 } beg;
1644 struct {
1645 uint32_t data_residual;
1646 uint8_t status;
1647 uint8_t pad;
1648 uint16_t sense_length;
1649 uint8_t sense_data[32];
1650 } end;
1651 } fcd;
1652 } isp_xcmd_t;
1653
1654 /*
1655 * Target Mode related definitions
1656 */
1657 #define QLTM_SENSELEN 18 /* non-FC cards only */
1658 #define QLTM_SVALID 0x80
1659
1660 /*
1661 * Structure for Enable Lun and Modify Lun queue entries
1662 */
1663 typedef struct {
1664 isphdr_t le_header;
1665 uint32_t le_reserved;
1666 uint8_t le_lun;
1667 uint8_t le_rsvd;
1668 uint8_t le_ops; /* Modify LUN only */
1669 uint8_t le_tgt; /* Not for FC */
1670 uint32_t le_flags; /* Not for FC */
1671 uint8_t le_status;
1672 uint8_t le_reserved2;
1673 uint8_t le_cmd_count;
1674 uint8_t le_in_count;
1675 uint8_t le_cdb6len; /* Not for FC */
1676 uint8_t le_cdb7len; /* Not for FC */
1677 uint16_t le_timeout;
1678 uint16_t le_reserved3[20];
1679 } lun_entry_t;
1680
1681 /*
1682 * le_flags values
1683 */
1684 #define LUN_TQAE 0x00000002 /* bit1 Tagged Queue Action Enable */
1685 #define LUN_DSSM 0x01000000 /* bit24 Disable Sending SDP Message */
1686 #define LUN_DISAD 0x02000000 /* bit25 Disable autodisconnect */
1687 #define LUN_DM 0x40000000 /* bit30 Disconnects Mandatory */
1688
1689 /*
1690 * le_ops values
1691 */
1692 #define LUN_CCINCR 0x01 /* increment command count */
1693 #define LUN_CCDECR 0x02 /* decrement command count */
1694 #define LUN_ININCR 0x40 /* increment immed. notify count */
1695 #define LUN_INDECR 0x80 /* decrement immed. notify count */
1696
1697 /*
1698 * le_status values
1699 */
1700 #define LUN_OK 0x01 /* we be rockin' */
1701 #define LUN_ERR 0x04 /* request completed with error */
1702 #define LUN_INVAL 0x06 /* invalid request */
1703 #define LUN_NOCAP 0x16 /* can't provide requested capability */
1704 #define LUN_ENABLED 0x3E /* LUN already enabled */
1705
1706 /*
1707 * Immediate Notify Entry structure
1708 */
1709 #define IN_MSGLEN 8 /* 8 bytes */
1710 #define IN_RSVDLEN 8 /* 8 words */
1711 typedef struct {
1712 isphdr_t in_header;
1713 uint32_t in_reserved;
1714 uint8_t in_lun; /* lun */
1715 uint8_t in_iid; /* initiator */
1716 uint8_t in_reserved2;
1717 uint8_t in_tgt; /* target */
1718 uint32_t in_flags;
1719 uint8_t in_status;
1720 uint8_t in_rsvd2;
1721 uint8_t in_tag_val; /* tag value */
1722 uint8_t in_tag_type; /* tag type */
1723 uint16_t in_seqid; /* sequence id */
1724 uint8_t in_msg[IN_MSGLEN]; /* SCSI message bytes */
1725 uint16_t in_reserved3[IN_RSVDLEN];
1726 uint8_t in_sense[QLTM_SENSELEN];/* suggested sense data */
1727 } in_entry_t;
1728
1729 typedef struct {
1730 isphdr_t in_header;
1731 uint32_t in_reserved;
1732 uint8_t in_lun; /* lun */
1733 uint8_t in_iid; /* initiator */
1734 uint16_t in_scclun;
1735 uint32_t in_reserved2;
1736 uint16_t in_status;
1737 uint16_t in_task_flags;
1738 uint16_t in_seqid; /* sequence id */
1739 } in_fcentry_t;
1740
1741 typedef struct {
1742 isphdr_t in_header;
1743 uint32_t in_reserved;
1744 uint16_t in_iid; /* initiator */
1745 uint16_t in_scclun;
1746 uint32_t in_reserved2;
1747 uint16_t in_status;
1748 uint16_t in_task_flags;
1749 uint16_t in_seqid; /* sequence id */
1750 } in_fcentry_e_t;
1751
1752 /*
1753 * Values for the in_status field
1754 */
1755 #define IN_REJECT 0x0D /* Message Reject message received */
1756 #define IN_RESET 0x0E /* Bus Reset occurred */
1757 #define IN_NO_RCAP 0x16 /* requested capability not available */
1758 #define IN_IDE_RECEIVED 0x33 /* Initiator Detected Error msg received */
1759 #define IN_RSRC_UNAVAIL 0x34 /* resource unavailable */
1760 #define IN_MSG_RECEIVED 0x36 /* SCSI message received */
1761 #define IN_ABORT_TASK 0x20 /* task named in RX_ID is being aborted (FC) */
1762 #define IN_PORT_LOGOUT 0x29 /* port has logged out (FC) */
1763 #define IN_PORT_CHANGED 0x2A /* port changed */
1764 #define IN_GLOBAL_LOGO 0x2E /* all ports logged out */
1765 #define IN_NO_NEXUS 0x3B /* Nexus not established */
1766
1767 /*
1768 * Values for the in_task_flags field- should only get one at a time!
1769 */
1770 #define TASK_FLAGS_RESERVED_MASK (0xe700)
1771 #define TASK_FLAGS_CLEAR_ACA (1<<14)
1772 #define TASK_FLAGS_TARGET_RESET (1<<13)
1773 #define TASK_FLAGS_LUN_RESET (1<<12)
1774 #define TASK_FLAGS_CLEAR_TASK_SET (1<<10)
1775 #define TASK_FLAGS_ABORT_TASK_SET (1<<9)
1776
1777 /*
1778 * ISP24XX Immediate Notify
1779 */
1780 typedef struct {
1781 isphdr_t in_header;
1782 uint32_t in_reserved;
1783 uint16_t in_nphdl;
1784 uint16_t in_reserved1;
1785 uint16_t in_flags;
1786 uint16_t in_srr_rxid;
1787 uint16_t in_status;
1788 uint8_t in_status_subcode;
1789 uint8_t in_reserved2;
1790 uint32_t in_rxid;
1791 uint16_t in_srr_reloff_lo;
1792 uint16_t in_srr_reloff_hi;
1793 uint16_t in_srr_iu;
1794 uint16_t in_srr_oxid;
1795 /*
1796 * If bit 2 is set in in_flags, the following
1797 * two tags are valid. If the received ELS is
1798 * a LOGO, then these tags contain the N Port ID
1799 * from the LOGO payload. If the received ELS
1800 * request is TPRLO, these tags contain the
1801 * Third Party Originator N Port ID.
1802 */
1803 uint16_t in_nport_id_hi;
1804 uint8_t in_nport_id_lo;
1805 uint8_t in_reserved3;
1806 /*
1807 * If bit 2 is set in in_flags, the following
1808 * tag is valid. If the received ELS is a LOGO,
1809 * then this tag contains the n-port handle
1810 * from the LOGO payload. If the received ELS
1811 * request is TPRLO, this tag contain the
1812 * n-port handle for the Third Party Originator.
1813 */
1814 uint16_t in_np_handle;
1815 uint8_t in_reserved4[12];
1816 uint8_t in_reserved5;
1817 uint8_t in_vpidx;
1818 uint32_t in_reserved6;
1819 uint16_t in_portid_lo;
1820 uint8_t in_portid_hi;
1821 uint8_t in_reserved7;
1822 uint16_t in_reserved8;
1823 uint16_t in_oxid;
1824 } in_fcentry_24xx_t;
1825
1826 #define IN24XX_FLAG_PUREX_IOCB 0x1
1827 #define IN24XX_FLAG_GLOBAL_LOGOUT 0x2
1828 #define IN24XX_FLAG_NPHDL_VALID 0x4
1829
1830 #define IN24XX_LIP_RESET 0x0E
1831 #define IN24XX_LINK_RESET 0x0F
1832 #define IN24XX_PORT_LOGOUT 0x29
1833 #define IN24XX_PORT_CHANGED 0x2A
1834 #define IN24XX_LINK_FAILED 0x2E
1835 #define IN24XX_SRR_RCVD 0x45
1836 #define IN24XX_ELS_RCVD 0x46 /*
1837 * login-affectin ELS received- check
1838 * subcode for specific opcode
1839 */
1840
1841 /*
1842 * For f/w > 4.0.25, these offsets in the Immediate Notify contain
1843 * the WWNN/WWPN if the ELS is PLOGI, PDISC or ADISC. The WWN is in
1844 * Big Endian format.
1845 */
1846 #define IN24XX_PLOGI_WWNN_OFF 0x20
1847 #define IN24XX_PLOGI_WWPN_OFF 0x28
1848
1849 /*
1850 * For f/w > 4.0.25, this offset in the Immediate Notify contain
1851 * the WWPN if the ELS is LOGO. The WWN is in Big Endian format.
1852 */
1853 #define IN24XX_LOGO_WWPN_OFF 0x28
1854
1855 /*
1856 * Immediate Notify Status Subcodes for IN24XX_PORT_LOGOUT
1857 */
1858 #define IN24XX_PORT_LOGOUT_PDISC_TMO 0x00
1859 #define IN24XX_PORT_LOGOUT_UXPR_DISC 0x01
1860 #define IN24XX_PORT_LOGOUT_OWN_OPN 0x02
1861 #define IN24XX_PORT_LOGOUT_OWN_OPN_SFT 0x03
1862 #define IN24XX_PORT_LOGOUT_ABTS_TMO 0x04
1863 #define IN24XX_PORT_LOGOUT_DISC_RJT 0x05
1864 #define IN24XX_PORT_LOGOUT_LOGIN_NEEDED 0x06
1865 #define IN24XX_PORT_LOGOUT_BAD_DISC 0x07
1866 #define IN24XX_PORT_LOGOUT_LOST_ALPA 0x08
1867 #define IN24XX_PORT_LOGOUT_XMIT_FAILURE 0x09
1868
1869 /*
1870 * Immediate Notify Status Subcodes for IN24XX_PORT_CHANGED
1871 */
1872 #define IN24XX_PORT_CHANGED_BADFAN 0x00
1873 #define IN24XX_PORT_CHANGED_TOPO_CHANGE 0x01
1874 #define IN24XX_PORT_CHANGED_FLOGI_ACC 0x02
1875 #define IN24XX_PORT_CHANGED_FLOGI_RJT 0x03
1876 #define IN24XX_PORT_CHANGED_TIMEOUT 0x04
1877 #define IN24XX_PORT_CHANGED_PORT_CHANGE 0x05
1878
1879 /*
1880 * Notify Acknowledge Entry structure
1881 */
1882 #define NA_RSVDLEN 22
1883 typedef struct {
1884 isphdr_t na_header;
1885 uint32_t na_reserved;
1886 uint8_t na_lun; /* lun */
1887 uint8_t na_iid; /* initiator */
1888 uint8_t na_reserved2;
1889 uint8_t na_tgt; /* target */
1890 uint32_t na_flags;
1891 uint8_t na_status;
1892 uint8_t na_event;
1893 uint16_t na_seqid; /* sequence id */
1894 uint16_t na_reserved3[NA_RSVDLEN];
1895 } na_entry_t;
1896
1897 /*
1898 * Value for the na_event field
1899 */
1900 #define NA_RST_CLRD 0x80 /* Clear an async event notification */
1901 #define NA_OK 0x01 /* Notify Acknowledge Succeeded */
1902 #define NA_INVALID 0x06 /* Invalid Notify Acknowledge */
1903
1904 #define NA2_RSVDLEN 21
1905 typedef struct {
1906 isphdr_t na_header;
1907 uint32_t na_reserved;
1908 uint8_t na_reserved1;
1909 uint8_t na_iid; /* initiator loop id */
1910 uint16_t na_response;
1911 uint16_t na_flags;
1912 uint16_t na_reserved2;
1913 uint16_t na_status;
1914 uint16_t na_task_flags;
1915 uint16_t na_seqid; /* sequence id */
1916 uint16_t na_reserved3[NA2_RSVDLEN];
1917 } na_fcentry_t;
1918
1919 typedef struct {
1920 isphdr_t na_header;
1921 uint32_t na_reserved;
1922 uint16_t na_iid; /* initiator loop id */
1923 uint16_t na_response; /* response code */
1924 uint16_t na_flags;
1925 uint16_t na_reserved2;
1926 uint16_t na_status;
1927 uint16_t na_task_flags;
1928 uint16_t na_seqid; /* sequence id */
1929 uint16_t na_reserved3[NA2_RSVDLEN];
1930 } na_fcentry_e_t;
1931
1932 #define NAFC_RCOUNT 0x80 /* increment resource count */
1933 #define NAFC_RST_CLRD 0x20 /* Clear LIP Reset */
1934 #define NAFC_TVALID 0x10 /* task mangement response code is valid */
1935
1936 /*
1937 * ISP24XX Notify Acknowledge
1938 */
1939
1940 typedef struct {
1941 isphdr_t na_header;
1942 uint32_t na_handle;
1943 uint16_t na_nphdl;
1944 uint16_t na_reserved1;
1945 uint16_t na_flags;
1946 uint16_t na_srr_rxid;
1947 uint16_t na_status;
1948 uint8_t na_status_subcode;
1949 uint8_t na_reserved2;
1950 uint32_t na_rxid;
1951 uint16_t na_srr_reloff_lo;
1952 uint16_t na_srr_reloff_hi;
1953 uint16_t na_srr_iu;
1954 uint16_t na_srr_flags;
1955 uint8_t na_reserved3[18];
1956 uint8_t na_reserved4;
1957 uint8_t na_vpidx;
1958 uint8_t na_srr_reject_vunique;
1959 uint8_t na_srr_reject_explanation;
1960 uint8_t na_srr_reject_code;
1961 uint8_t na_reserved5;
1962 uint8_t na_reserved6[6];
1963 uint16_t na_oxid;
1964 } na_fcentry_24xx_t;
1965
1966 /*
1967 * Accept Target I/O Entry structure
1968 */
1969 #define ATIO_CDBLEN 26
1970
1971 typedef struct {
1972 isphdr_t at_header;
1973 uint16_t at_reserved;
1974 uint16_t at_handle;
1975 uint8_t at_lun; /* lun */
1976 uint8_t at_iid; /* initiator */
1977 uint8_t at_cdblen; /* cdb length */
1978 uint8_t at_tgt; /* target */
1979 uint32_t at_flags;
1980 uint8_t at_status; /* firmware status */
1981 uint8_t at_scsi_status; /* scsi status */
1982 uint8_t at_tag_val; /* tag value */
1983 uint8_t at_tag_type; /* tag type */
1984 uint8_t at_cdb[ATIO_CDBLEN]; /* received CDB */
1985 uint8_t at_sense[QLTM_SENSELEN];/* suggested sense data */
1986 } at_entry_t;
1987
1988 /*
1989 * at_flags values
1990 */
1991 #define AT_NODISC 0x00008000 /* disconnect disabled */
1992 #define AT_TQAE 0x00000002 /* Tagged Queue Action enabled */
1993
1994 /*
1995 * at_status values
1996 */
1997 #define AT_PATH_INVALID 0x07 /* ATIO sent to firmware for disabled lun */
1998 #define AT_RESET 0x0E /* SCSI Bus Reset Occurred */
1999 #define AT_PHASE_ERROR 0x14 /* Bus phase sequence error */
2000 #define AT_NOCAP 0x16 /* Requested capability not available */
2001 #define AT_BDR_MSG 0x17 /* Bus Device Reset msg received */
2002 #define AT_CDB 0x3D /* CDB received */
2003 /*
2004 * Macros to create and fetch and test concatenated handle and tag value macros
2005 * (SPI only)
2006 */
2007 #define AT_MAKE_TAGID(tid, aep) \
2008 tid = aep->at_handle; \
2009 if (aep->at_flags & AT_TQAE) { \
2010 tid |= (aep->at_tag_val << 16); \
2011 tid |= (1 << 24); \
2012 }
2013
2014 #define CT_MAKE_TAGID(tid, ct) \
2015 tid = ct->ct_fwhandle; \
2016 if (ct->ct_flags & CT_TQAE) { \
2017 tid |= (ct->ct_tag_val << 16); \
2018 tid |= (1 << 24); \
2019 }
2020
2021 #define AT_HAS_TAG(val) ((val) & (1 << 24))
2022 #define AT_GET_TAG(val) (((val) >> 16) & 0xff)
2023 #define AT_GET_HANDLE(val) ((val) & 0xffff)
2024
2025 #define IN_MAKE_TAGID(tid, inp) \
2026 tid = inp->in_seqid; \
2027 tid |= (inp->in_tag_val << 16); \
2028 tid |= (1 << 24)
2029
2030 /*
2031 * Accept Target I/O Entry structure, Type 2
2032 */
2033 #define ATIO2_CDBLEN 16
2034
2035 typedef struct {
2036 isphdr_t at_header;
2037 uint32_t at_reserved;
2038 uint8_t at_lun; /* lun or reserved */
2039 uint8_t at_iid; /* initiator */
2040 uint16_t at_rxid; /* response ID */
2041 uint16_t at_flags;
2042 uint16_t at_status; /* firmware status */
2043 uint8_t at_crn; /* command reference number */
2044 uint8_t at_taskcodes;
2045 uint8_t at_taskflags;
2046 uint8_t at_execodes;
2047 uint8_t at_cdb[ATIO2_CDBLEN]; /* received CDB */
2048 uint32_t at_datalen; /* allocated data len */
2049 uint16_t at_scclun; /* SCC Lun or reserved */
2050 uint16_t at_wwpn[4]; /* WWPN of initiator */
2051 uint16_t at_reserved2[6];
2052 uint16_t at_oxid;
2053 } at2_entry_t;
2054
2055 typedef struct {
2056 isphdr_t at_header;
2057 uint32_t at_reserved;
2058 uint16_t at_iid; /* initiator */
2059 uint16_t at_rxid; /* response ID */
2060 uint16_t at_flags;
2061 uint16_t at_status; /* firmware status */
2062 uint8_t at_crn; /* command reference number */
2063 uint8_t at_taskcodes;
2064 uint8_t at_taskflags;
2065 uint8_t at_execodes;
2066 uint8_t at_cdb[ATIO2_CDBLEN]; /* received CDB */
2067 uint32_t at_datalen; /* allocated data len */
2068 uint16_t at_scclun; /* SCC Lun or reserved */
2069 uint16_t at_wwpn[4]; /* WWPN of initiator */
2070 uint16_t at_reserved2[6];
2071 uint16_t at_oxid;
2072 } at2e_entry_t;
2073
2074 #define ATIO2_WWPN_OFFSET 0x2A
2075 #define ATIO2_OXID_OFFSET 0x3E
2076
2077 #define ATIO2_TC_ATTR_MASK 0x7
2078 #define ATIO2_TC_ATTR_SIMPLEQ 0
2079 #define ATIO2_TC_ATTR_HEADOFQ 1
2080 #define ATIO2_TC_ATTR_ORDERED 2
2081 #define ATIO2_TC_ATTR_ACAQ 4
2082 #define ATIO2_TC_ATTR_UNTAGGED 5
2083
2084 #define ATIO2_EX_WRITE 0x1
2085 #define ATIO2_EX_READ 0x2
2086 /*
2087 * Macros to create and fetch and test concatenated handle and tag value macros
2088 */
2089 #define AT2_MAKE_TAGID(tid, bus, inst, aep) \
2090 tid = aep->at_rxid; \
2091 tid |= (((uint64_t)inst) << 32); \
2092 tid |= (((uint64_t)bus) << 48)
2093
2094 #define CT2_MAKE_TAGID(tid, bus, inst, ct) \
2095 tid = ct->ct_rxid; \
2096 tid |= (((uint64_t)inst) << 32); \
2097 tid |= (((uint64_t)(bus & 0xff)) << 48)
2098
2099 #define AT2_HAS_TAG(val) 1
2100 #define AT2_GET_TAG(val) ((val) & 0xffffffff)
2101 #define AT2_GET_INST(val) (((val) >> 32) & 0xffff)
2102 #define AT2_GET_HANDLE AT2_GET_TAG
2103 #define AT2_GET_BUS(val) (((val) >> 48) & 0xff)
2104
2105 #define FC_HAS_TAG AT2_HAS_TAG
2106 #define FC_GET_TAG AT2_GET_TAG
2107 #define FC_GET_INST AT2_GET_INST
2108 #define FC_GET_HANDLE AT2_GET_HANDLE
2109
2110 #define IN_FC_MAKE_TAGID(tid, bus, inst, seqid) \
2111 tid = seqid; \
2112 tid |= (((uint64_t)inst) << 32); \
2113 tid |= (((uint64_t)(bus & 0xff)) << 48)
2114
2115 #define FC_TAG_INSERT_INST(tid, inst) \
2116 tid &= ~0x0000ffff00000000ull; \
2117 tid |= (((uint64_t)inst) << 32)
2118
2119 /*
2120 * 24XX ATIO Definition
2121 *
2122 * This is *quite* different from other entry types.
2123 * First of all, it has its own queue it comes in on.
2124 *
2125 * Secondly, it doesn't have a normal header.
2126 *
2127 * Thirdly, it's just a passthru of the FCP CMND IU
2128 * which is recorded in big endian mode.
2129 */
2130 typedef struct {
2131 uint8_t at_type;
2132 uint8_t at_count;
2133 /*
2134 * Task attribute in high four bits,
2135 * the rest is the FCP CMND IU Length.
2136 * NB: the command can extend past the
2137 * length for a single queue entry.
2138 */
2139 uint16_t at_ta_len;
2140 uint32_t at_rxid;
2141 fc_hdr_t at_hdr;
2142 fcp_cmnd_iu_t at_cmnd;
2143 } at7_entry_t;
2144 #define AT7_NORESRC_RXID 0xffffffff
2145
2146
2147 /*
2148 * Continue Target I/O Entry structure
2149 * Request from driver. The response from the
2150 * ISP firmware is the same except that the last 18
2151 * bytes are overwritten by suggested sense data if
2152 * the 'autosense valid' bit is set in the status byte.
2153 */
2154 typedef struct {
2155 isphdr_t ct_header;
2156 uint16_t ct_syshandle;
2157 uint16_t ct_fwhandle; /* required by f/w */
2158 uint8_t ct_lun; /* lun */
2159 uint8_t ct_iid; /* initiator id */
2160 uint8_t ct_reserved2;
2161 uint8_t ct_tgt; /* our target id */
2162 uint32_t ct_flags;
2163 uint8_t ct_status; /* isp status */
2164 uint8_t ct_scsi_status; /* scsi status */
2165 uint8_t ct_tag_val; /* tag value */
2166 uint8_t ct_tag_type; /* tag type */
2167 uint32_t ct_xfrlen; /* transfer length */
2168 int32_t ct_resid; /* residual length */
2169 uint16_t ct_timeout;
2170 uint16_t ct_seg_count;
2171 ispds_t ct_dataseg[ISP_RQDSEG];
2172 } ct_entry_t;
2173
2174 /*
2175 * For some of the dual port SCSI adapters, port (bus #) is reported
2176 * in the MSbit of ct_iid. Bit fields are a bit too awkward here.
2177 *
2178 * Note that this does not apply to FC adapters at all which can and
2179 * do report IIDs between 0x81 && 0xfe (or 0x7ff) which represent devices
2180 * that have logged in across a SCSI fabric.
2181 */
2182 #define GET_IID_VAL(x) (x & 0x3f)
2183 #define GET_BUS_VAL(x) ((x >> 7) & 0x1)
2184 #define SET_IID_VAL(y, x) y = ((y & ~0x3f) | (x & 0x3f))
2185 #define SET_BUS_VAL(y, x) y = ((y & 0x3f) | ((x & 0x1) << 7))
2186
2187 /*
2188 * ct_flags values
2189 */
2190 #define CT_TQAE 0x00000002 /* bit 1, Tagged Queue Action enable */
2191 #define CT_DATA_IN 0x00000040 /* bits 6&7, Data direction */
2192 #define CT_DATA_OUT 0x00000080 /* bits 6&7, Data direction */
2193 #define CT_NO_DATA 0x000000C0 /* bits 6&7, Data direction */
2194 #define CT_CCINCR 0x00000100 /* bit 8, autoincrement atio count */
2195 #define CT_DATAMASK 0x000000C0 /* bits 6&7, Data direction */
2196 #define CT_INISYNCWIDE 0x00004000 /* bit 14, Do Sync/Wide Negotiation */
2197 #define CT_NODISC 0x00008000 /* bit 15, Disconnects disabled */
2198 #define CT_DSDP 0x01000000 /* bit 24, Disable Save Data Pointers */
2199 #define CT_SENDRDP 0x04000000 /* bit 26, Send Restore Pointers msg */
2200 #define CT_SENDSTATUS 0x80000000 /* bit 31, Send SCSI status byte */
2201
2202 /*
2203 * ct_status values
2204 * - set by the firmware when it returns the CTIO
2205 */
2206 #define CT_OK 0x01 /* completed without error */
2207 #define CT_ABORTED 0x02 /* aborted by host */
2208 #define CT_ERR 0x04 /* see sense data for error */
2209 #define CT_INVAL 0x06 /* request for disabled lun */
2210 #define CT_NOPATH 0x07 /* invalid ITL nexus */
2211 #define CT_INVRXID 0x08 /* (FC only) Invalid RX_ID */
2212 #define CT_DATA_OVER 0x09 /* (FC only) Data Overrun */
2213 #define CT_RSELTMO 0x0A /* reselection timeout after 2 tries */
2214 #define CT_TIMEOUT 0x0B /* timed out */
2215 #define CT_RESET 0x0E /* SCSI Bus Reset occurred */
2216 #define CT_PARITY 0x0F /* Uncorrectable Parity Error */
2217 #define CT_BUS_ERROR 0x10 /* (FC Only) DMA PCI Error */
2218 #define CT_PANIC 0x13 /* Unrecoverable Error */
2219 #define CT_PHASE_ERROR 0x14 /* Bus phase sequence error */
2220 #define CT_DATA_UNDER 0x15 /* (FC only) Data Underrun */
2221 #define CT_BDR_MSG 0x17 /* Bus Device Reset msg received */
2222 #define CT_TERMINATED 0x19 /* due to Terminate Transfer mbox cmd */
2223 #define CT_PORTUNAVAIL 0x28 /* port not available */
2224 #define CT_LOGOUT 0x29 /* port logout */
2225 #define CT_PORTCHANGED 0x2A /* port changed */
2226 #define CT_IDE 0x33 /* Initiator Detected Error */
2227 #define CT_NOACK 0x35 /* Outstanding Immed. Notify. entry */
2228 #define CT_SRR 0x45 /* SRR Received */
2229 #define CT_LUN_RESET 0x48 /* Lun Reset Received */
2230
2231 #define CT_HBA_RESET 0xffff /* pseudo error - command destroyed by HBA reset*/
2232
2233 /*
2234 * When the firmware returns a CTIO entry, it may overwrite the last
2235 * part of the structure with sense data. This starts at offset 0x2E
2236 * into the entry, which is in the middle of ct_dataseg[1]. Rather
2237 * than define a new struct for this, I'm just using the sense data
2238 * offset.
2239 */
2240 #define CTIO_SENSE_OFFSET 0x2E
2241
2242 /*
2243 * Entry length in u_longs. All entries are the same size so
2244 * any one will do as the numerator.
2245 */
2246 #define UINT32_ENTRY_SIZE (sizeof(at_entry_t)/sizeof(uint32_t))
2247
2248 /*
2249 * QLA2100 CTIO (type 2) entry
2250 */
2251 #define MAXRESPLEN 26
2252 typedef struct {
2253 isphdr_t ct_header;
2254 uint32_t ct_syshandle;
2255 uint8_t ct_lun; /* lun */
2256 uint8_t ct_iid; /* initiator id */
2257 uint16_t ct_rxid; /* response ID */
2258 uint16_t ct_flags;
2259 uint16_t ct_status; /* isp status */
2260 uint16_t ct_timeout;
2261 uint16_t ct_seg_count;
2262 uint32_t ct_reloff; /* relative offset */
2263 int32_t ct_resid; /* residual length */
2264 union {
2265 /*
2266 * The three different modes that the target driver
2267 * can set the CTIO{2,3,4} up as.
2268 *
2269 * The first is for sending FCP_DATA_IUs as well as
2270 * (optionally) sending a terminal SCSI status FCP_RSP_IU.
2271 *
2272 * The second is for sending SCSI sense data in an FCP_RSP_IU.
2273 * Note that no FCP_DATA_IUs will be sent.
2274 *
2275 * The third is for sending FCP_RSP_IUs as built specifically
2276 * in system memory as located by the isp_dataseg.
2277 */
2278 struct {
2279 uint32_t _reserved;
2280 uint16_t _reserved2;
2281 uint16_t ct_scsi_status;
2282 uint32_t ct_xfrlen;
2283 union {
2284 ispds_t ct_dataseg[ISP_RQDSEG_T2];
2285 ispds64_t ct_dataseg64[ISP_RQDSEG_T3];
2286 ispdslist_t ct_dslist;
2287 } u;
2288 } m0;
2289 struct {
2290 uint16_t _reserved;
2291 uint16_t _reserved2;
2292 uint16_t ct_senselen;
2293 uint16_t ct_scsi_status;
2294 uint16_t ct_resplen;
2295 uint8_t ct_resp[MAXRESPLEN];
2296 } m1;
2297 struct {
2298 uint32_t _reserved;
2299 uint16_t _reserved2;
2300 uint16_t _reserved3;
2301 uint32_t ct_datalen;
2302 ispds_t ct_fcp_rsp_iudata;
2303 } m2;
2304 } rsp;
2305 } ct2_entry_t;
2306
2307 typedef struct {
2308 isphdr_t ct_header;
2309 uint32_t ct_syshandle;
2310 uint16_t ct_iid; /* initiator id */
2311 uint16_t ct_rxid; /* response ID */
2312 uint16_t ct_flags;
2313 uint16_t ct_status; /* isp status */
2314 uint16_t ct_timeout;
2315 uint16_t ct_seg_count;
2316 uint32_t ct_reloff; /* relative offset */
2317 int32_t ct_resid; /* residual length */
2318 union {
2319 struct {
2320 uint32_t _reserved;
2321 uint16_t _reserved2;
2322 uint16_t ct_scsi_status;
2323 uint32_t ct_xfrlen;
2324 union {
2325 ispds_t ct_dataseg[ISP_RQDSEG_T2];
2326 ispds64_t ct_dataseg64[ISP_RQDSEG_T3];
2327 ispdslist_t ct_dslist;
2328 } u;
2329 } m0;
2330 struct {
2331 uint16_t _reserved;
2332 uint16_t _reserved2;
2333 uint16_t ct_senselen;
2334 uint16_t ct_scsi_status;
2335 uint16_t ct_resplen;
2336 uint8_t ct_resp[MAXRESPLEN];
2337 } m1;
2338 struct {
2339 uint32_t _reserved;
2340 uint16_t _reserved2;
2341 uint16_t _reserved3;
2342 uint32_t ct_datalen;
2343 ispds_t ct_fcp_rsp_iudata;
2344 } m2;
2345 } rsp;
2346 } ct2e_entry_t;
2347
2348 /*
2349 * ct_flags values for CTIO2
2350 */
2351 #define CT2_FLAG_MODE0 0x0000
2352 #define CT2_FLAG_MODE1 0x0001
2353 #define CT2_FLAG_MODE2 0x0002
2354 #define CT2_FLAG_MMASK 0x0003
2355 #define CT2_DATA_IN 0x0040
2356 #define CT2_DATA_OUT 0x0080
2357 #define CT2_NO_DATA 0x00C0
2358 #define CT2_DATAMASK 0x00C0
2359 #define CT2_CCINCR 0x0100
2360 #define CT2_FASTPOST 0x0200
2361 #define CT2_CONFIRM 0x2000
2362 #define CT2_TERMINATE 0x4000
2363 #define CT2_SENDSTATUS 0x8000
2364
2365 /*
2366 * ct_status values are (mostly) the same as that for ct_entry.
2367 */
2368
2369 /*
2370 * ct_scsi_status values- the low 8 bits are the normal SCSI status
2371 * we know and love. The upper 8 bits are validity markers for FCP_RSP_IU
2372 * fields.
2373 */
2374 #define CT2_RSPLEN_VALID 0x0100
2375 #define CT2_SNSLEN_VALID 0x0200
2376 #define CT2_DATA_OVER 0x0400
2377 #define CT2_DATA_UNDER 0x0800
2378
2379 /*
2380 * ISP24XX CTIO
2381 */
2382 #define MAXRESPLEN_24XX 24
2383 typedef struct {
2384 isphdr_t ct_header;
2385 uint32_t ct_syshandle;
2386 uint16_t ct_nphdl; /* status on returned CTIOs */
2387 uint16_t ct_timeout;
2388 uint16_t ct_seg_count;
2389 uint8_t ct_vpidx;
2390 uint8_t ct_xflags;
2391 uint16_t ct_iid_lo; /* low 16 bits of portid */
2392 uint8_t ct_iid_hi; /* hi 8 bits of portid */
2393 uint8_t ct_reserved;
2394 uint32_t ct_rxid;
2395 uint16_t ct_senselen; /* mode 1 only */
2396 uint16_t ct_flags;
2397 int32_t ct_resid; /* residual length */
2398 uint16_t ct_oxid;
2399 uint16_t ct_scsi_status; /* modes 0 && 1 only */
2400 union {
2401 struct {
2402 uint32_t reloff;
2403 uint32_t reserved0;
2404 uint32_t ct_xfrlen;
2405 uint32_t reserved1;
2406 ispds64_t ds;
2407 } m0;
2408 struct {
2409 uint16_t ct_resplen;
2410 uint16_t reserved;
2411 uint8_t ct_resp[MAXRESPLEN_24XX];
2412 } m1;
2413 struct {
2414 uint32_t reserved0;
2415 uint32_t ct_datalen;
2416 uint32_t reserved1;
2417 ispds64_t ct_fcp_rsp_iudata;
2418 } m2;
2419 } rsp;
2420 } ct7_entry_t;
2421
2422 /*
2423 * ct_flags values for CTIO7
2424 */
2425 #define CT7_DATA_IN 0x0002
2426 #define CT7_DATA_OUT 0x0001
2427 #define CT7_NO_DATA 0x0000
2428 #define CT7_DATAMASK 0x003
2429 #define CT7_DSD_ENABLE 0x0004
2430 #define CT7_CONF_STSFD 0x0010
2431 #define CT7_EXPLCT_CONF 0x0020
2432 #define CT7_FLAG_MODE0 0x0000
2433 #define CT7_FLAG_MODE1 0x0040
2434 #define CT7_FLAG_MODE2 0x0080
2435 #define CT7_FLAG_MMASK 0x00C0
2436 #define CT7_NOACK 0x0100
2437 #define CT7_TASK_ATTR_SHIFT 9
2438 #define CT7_CONFIRM 0x2000
2439 #define CT7_TERMINATE 0x4000
2440 #define CT7_SENDSTATUS 0x8000
2441
2442 /*
2443 * Type 7 CTIO status codes
2444 */
2445 #define CT7_OK 0x01 /* completed without error */
2446 #define CT7_ABORTED 0x02 /* aborted by host */
2447 #define CT7_ERR 0x04 /* see sense data for error */
2448 #define CT7_INVAL 0x06 /* request for disabled lun */
2449 #define CT7_INVRXID 0x08 /* Invalid RX_ID */
2450 #define CT7_DATA_OVER 0x09 /* Data Overrun */
2451 #define CT7_TIMEOUT 0x0B /* timed out */
2452 #define CT7_RESET 0x0E /* LIP Rset Received */
2453 #define CT7_BUS_ERROR 0x10 /* DMA PCI Error */
2454 #define CT7_REASSY_ERR 0x11 /* DMA reassembly error */
2455 #define CT7_DATA_UNDER 0x15 /* Data Underrun */
2456 #define CT7_PORTUNAVAIL 0x28 /* port not available */
2457 #define CT7_LOGOUT 0x29 /* port logout */
2458 #define CT7_PORTCHANGED 0x2A /* port changed */
2459 #define CT7_SRR 0x45 /* SRR Received */
2460
2461 /*
2462 * Other 24XX related target IOCBs
2463 */
2464
2465 /*
2466 * ABTS Received
2467 */
2468 typedef struct {
2469 isphdr_t abts_header;
2470 uint8_t abts_reserved0[6];
2471 uint16_t abts_nphdl;
2472 uint16_t abts_reserved1;
2473 uint16_t abts_sof;
2474 uint32_t abts_rxid_abts;
2475 uint16_t abts_did_lo;
2476 uint8_t abts_did_hi;
2477 uint8_t abts_r_ctl;
2478 uint16_t abts_sid_lo;
2479 uint8_t abts_sid_hi;
2480 uint8_t abts_cs_ctl;
2481 uint16_t abts_fs_ctl;
2482 uint8_t abts_f_ctl;
2483 uint8_t abts_type;
2484 uint16_t abts_seq_cnt;
2485 uint8_t abts_df_ctl;
2486 uint8_t abts_seq_id;
2487 uint16_t abts_rx_id;
2488 uint16_t abts_ox_id;
2489 uint32_t abts_param;
2490 uint8_t abts_reserved2[16];
2491 uint32_t abts_rxid_task;
2492 } abts_t;
2493
2494 typedef struct {
2495 isphdr_t abts_rsp_header;
2496 uint32_t abts_rsp_handle;
2497 uint16_t abts_rsp_status;
2498 uint16_t abts_rsp_nphdl;
2499 uint16_t abts_rsp_ctl_flags;
2500 uint16_t abts_rsp_sof;
2501 uint32_t abts_rsp_rxid_abts;
2502 uint16_t abts_rsp_did_lo;
2503 uint8_t abts_rsp_did_hi;
2504 uint8_t abts_rsp_r_ctl;
2505 uint16_t abts_rsp_sid_lo;
2506 uint8_t abts_rsp_sid_hi;
2507 uint8_t abts_rsp_cs_ctl;
2508 uint16_t abts_rsp_f_ctl_lo;
2509 uint8_t abts_rsp_f_ctl_hi;
2510 uint8_t abts_rsp_type;
2511 uint16_t abts_rsp_seq_cnt;
2512 uint8_t abts_rsp_df_ctl;
2513 uint8_t abts_rsp_seq_id;
2514 uint16_t abts_rsp_rx_id;
2515 uint16_t abts_rsp_ox_id;
2516 uint32_t abts_rsp_param;
2517 union {
2518 struct {
2519 uint16_t reserved;
2520 uint8_t last_seq_id;
2521 uint8_t seq_id_valid;
2522 uint16_t aborted_rx_id;
2523 uint16_t aborted_ox_id;
2524 uint16_t high_seq_cnt;
2525 uint16_t low_seq_cnt;
2526 uint8_t reserved2[4];
2527 } ba_acc;
2528 struct {
2529 uint8_t vendor_unique;
2530 uint8_t explanation;
2531 uint8_t reason;
2532 uint8_t reserved;
2533 uint8_t reserved2[12];
2534 } ba_rjt;
2535 struct {
2536 uint8_t reserved[8];
2537 uint32_t subcode1;
2538 uint32_t subcode2;
2539 } rsp;
2540 uint8_t reserved[16];
2541 } abts_rsp_payload;
2542 uint32_t abts_rsp_rxid_task;
2543 } abts_rsp_t;
2544
2545 /* terminate this ABTS exchange */
2546 #define ISP24XX_ABTS_RSP_TERMINATE 0x01
2547
2548 #define ISP24XX_ABTS_RSP_COMPLETE 0x00
2549 #define ISP24XX_ABTS_RSP_RESET 0x04
2550 #define ISP24XX_ABTS_RSP_ABORTED 0x05
2551 #define ISP24XX_ABTS_RSP_TIMEOUT 0x06
2552 #define ISP24XX_ABTS_RSP_INVXID 0x08
2553 #define ISP24XX_ABTS_RSP_LOGOUT 0x29
2554 #define ISP24XX_ABTS_RSP_SUBCODE 0x31
2555
2556 #define ISP24XX_NO_TASK 0xffffffff
2557
2558 /*
2559 * Miscellaneous
2560 *
2561 * These are the limits of the number of dma segments we
2562 * can deal with based not on the size of the segment counter
2563 * (which is 16 bits), but on the size of the number of
2564 * queue entries field (which is 8 bits). We assume no
2565 * segments in the first queue entry, so we can either
2566 * have 7 dma segments per continuation entry or 5
2567 * (for 64 bit dma).. multiplying out by 254....
2568 */
2569 #define ISP_NSEG_MAX 1778
2570 #define ISP_NSEG64_MAX 1270
2571
2572 #endif /* _ISPMBOX_H */
NetBSD on the FriendlyARM MINI2440