No empty .Rs/.Re
[netbsd-mini2440.git] / sys / dev / ic / tulipvar.h
blob98fb8821344b4ad5a0a56854dd80c44f6cb09293
1 /* $NetBSD: tulipvar.h,v 1.63 2009/04/17 10:20:33 cegger Exp $ */
3 /*-
4 * Copyright (c) 1998, 1999, 2000 The NetBSD Foundation, Inc.
5 * All rights reserved.
7 * This code is derived from software contributed to The NetBSD Foundation
8 * by Jason R. Thorpe of the Numerical Aerospace Simulation Facility,
9 * NASA Ames Research Center.
11 * Redistribution and use in source and binary forms, with or without
12 * modification, are permitted provided that the following conditions
13 * are met:
14 * 1. Redistributions of source code must retain the above copyright
15 * notice, this list of conditions and the following disclaimer.
16 * 2. Redistributions in binary form must reproduce the above copyright
17 * notice, this list of conditions and the following disclaimer in the
18 * documentation and/or other materials provided with the distribution.
20 * THIS SOFTWARE IS PROVIDED BY THE NETBSD FOUNDATION, INC. AND CONTRIBUTORS
21 * ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED
22 * TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
23 * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS
24 * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
25 * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
26 * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
27 * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
28 * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
29 * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
30 * POSSIBILITY OF SUCH DAMAGE.
33 #ifndef _DEV_IC_TULIPVAR_H_
34 #define _DEV_IC_TULIPVAR_H_
36 #include "rnd.h"
38 #include <sys/queue.h>
39 #include <sys/callout.h>
41 #if NRND > 0
42 #include <sys/rnd.h>
43 #endif
46 * Misc. definitions for the Digital Semiconductor ``Tulip'' (21x4x)
47 * Ethernet controller family driver.
51 * Transmit descriptor list size. This is arbitrary, but allocate
52 * enough descriptors for 64 pending transmissions and 16 segments
53 * per packet. Since a descriptor holds 2 buffer addresses, that's
54 * 8 descriptors per packet. This MUST work out to a power of 2.
56 #define TULIP_NTXSEGS 16
58 #define TULIP_TXQUEUELEN 64
59 #define TULIP_NTXDESC (TULIP_TXQUEUELEN * TULIP_NTXSEGS)
60 #define TULIP_NTXDESC_MASK (TULIP_NTXDESC - 1)
61 #define TULIP_NEXTTX(x) ((x + 1) & TULIP_NTXDESC_MASK)
64 * Receive descriptor list size. We have one Rx buffer per incoming
65 * packet, so this logic is a little simpler.
67 #define TULIP_NRXDESC 64
68 #define TULIP_NRXDESC_MASK (TULIP_NRXDESC - 1)
69 #define TULIP_NEXTRX(x) ((x + 1) & TULIP_NRXDESC_MASK)
72 * Control structures are DMA'd to the TULIP chip. We allocate them in
73 * a single clump that maps to a single DMA segment to make several things
74 * easier.
76 struct tulip_control_data {
78 * The transmit descriptors.
80 struct tulip_desc tcd_txdescs[TULIP_NTXDESC];
83 * The receive descriptors.
85 struct tulip_desc tcd_rxdescs[TULIP_NRXDESC];
88 * The setup packet.
90 uint32_t tcd_setup_packet[TULIP_SETUP_PACKET_LEN / sizeof(uint32_t)];
93 #define TULIP_CDOFF(x) offsetof(struct tulip_control_data, x)
94 #define TULIP_CDTXOFF(x) TULIP_CDOFF(tcd_txdescs[(x)])
95 #define TULIP_CDRXOFF(x) TULIP_CDOFF(tcd_rxdescs[(x)])
96 #define TULIP_CDSPOFF TULIP_CDOFF(tcd_setup_packet)
99 * Software state for transmit jobs.
101 struct tulip_txsoft {
102 struct mbuf *txs_mbuf; /* head of our mbuf chain */
103 bus_dmamap_t txs_dmamap; /* our DMA map */
104 int txs_firstdesc; /* first descriptor in packet */
105 int txs_lastdesc; /* last descriptor in packet */
106 int txs_ndescs; /* number of descriptors */
107 SIMPLEQ_ENTRY(tulip_txsoft) txs_q;
110 SIMPLEQ_HEAD(tulip_txsq, tulip_txsoft);
113 * Software state for receive jobs.
115 struct tulip_rxsoft {
116 struct mbuf *rxs_mbuf; /* head of our mbuf chain */
117 bus_dmamap_t rxs_dmamap; /* our DMA map */
121 * Type of Tulip chip we're dealing with.
123 typedef enum {
124 TULIP_CHIP_INVALID = 0, /* invalid chip type */
125 TULIP_CHIP_DE425 = 1, /* DE-425 EISA */
126 TULIP_CHIP_21040 = 2, /* DECchip 21040 */
127 TULIP_CHIP_21041 = 3, /* DECchip 21041 */
128 TULIP_CHIP_21140 = 4, /* DECchip 21140 */
129 TULIP_CHIP_21140A = 5, /* DECchip 21140A */
130 TULIP_CHIP_21142 = 6, /* DECchip 21142 */
131 TULIP_CHIP_21143 = 7, /* DECchip 21143 */
132 TULIP_CHIP_82C168 = 8, /* Lite-On 82C168 PNIC */
133 TULIP_CHIP_82C169 = 9, /* Lite-On 82C169 PNIC */
134 TULIP_CHIP_82C115 = 10, /* Lite-On 82C115 PNIC II */
135 TULIP_CHIP_MX98713 = 11, /* Macronix 98713 PMAC */
136 TULIP_CHIP_MX98713A = 12, /* Macronix 98713A PMAC */
137 TULIP_CHIP_MX98715 = 13, /* Macronix 98715 PMAC */
138 TULIP_CHIP_MX98715A = 14, /* Macronix 98715A PMAC */
139 TULIP_CHIP_MX98715AEC_X = 15, /* Macronix 98715AEC-C, -E PMAC */
140 TULIP_CHIP_MX98725 = 16, /* Macronix 98725 PMAC */
141 TULIP_CHIP_WB89C840F = 17, /* Winbond 89C840F */
142 TULIP_CHIP_DM9102 = 18, /* Davicom DM9102 */
143 TULIP_CHIP_DM9102A = 19, /* Davicom DM9102A */
144 TULIP_CHIP_AL981 = 20, /* ADMtek AL981 */
145 TULIP_CHIP_AN983 = 21, /* ADMtek AN983 */
146 TULIP_CHIP_AN985 = 22, /* ADMtek AN985 */
147 TULIP_CHIP_AX88140 = 23, /* ASIX AX88140 */
148 TULIP_CHIP_AX88141 = 24, /* ASIX AX88141 */
149 TULIP_CHIP_X3201_3 = 25, /* Xircom X3201-3 */
150 TULIP_CHIP_RS7112 = 26 /* Conexant RS7112 LANfinity */
151 } tulip_chip_t;
153 #define TULIP_CHIP_NAMES \
155 NULL, \
156 "DE-425", \
157 "DECchip 21040", \
158 "DECchip 21041", \
159 "DECchip 21140", \
160 "DECchip 21140A", \
161 "DECchip 21142", \
162 "DECchip 21143", \
163 "Lite-On 82C168", \
164 "Lite-On 82C169", \
165 "Lite-On 82C115", \
166 "Macronix MX98713", \
167 "Macronix MX98713A", \
168 "Macronix MX98715", \
169 "Macronix MX98715A", \
170 "Macronix MX98715AEC-x", \
171 "Macronix MX98725", \
172 "Winbond 89C840F", \
173 "Davicom DM9102", \
174 "Davicom DM9102A", \
175 "ADMtek AL981", \
176 "ADMtek AN983", \
177 "ADMtek AN985", \
178 "ASIX AX88140", \
179 "ASIX AX88141", \
180 "Xircom X3201-3", \
181 "Conexant RS7112", \
184 struct tulip_softc;
187 * Media init, change, status function pointers.
189 struct tulip_mediasw {
190 void (*tmsw_init)(struct tulip_softc *);
191 void (*tmsw_get)(struct tulip_softc *, struct ifmediareq *);
192 int (*tmsw_set)(struct tulip_softc *);
196 * Table which describes the transmit threshold mode. We generally
197 * start at index 0. Whenever we get a transmit underrun, we increment
198 * our index, falling back if we encounter the NULL terminator.
200 struct tulip_txthresh_tab {
201 uint32_t txth_opmode; /* OPMODE bits */
202 const char *txth_name; /* name of mode */
205 #define TLP_TXTHRESH_TAB_10 { \
206 { OPMODE_TR_72, "72 bytes" }, \
207 { OPMODE_TR_96, "96 bytes" }, \
208 { OPMODE_TR_128, "128 bytes" }, \
209 { OPMODE_TR_160, "160 bytes" }, \
210 { 0, NULL }, \
213 #define TLP_TXTHRESH_TAB_10_100 { \
214 { OPMODE_TR_72, "72/128 bytes" }, \
215 { OPMODE_TR_96, "96/256 bytes" }, \
216 { OPMODE_TR_128, "128/512 bytes" }, \
217 { OPMODE_TR_160, "160/1024 bytes" }, \
218 { OPMODE_SF, "store and forward mode" }, \
219 { 0, NULL }, \
222 #define TXTH_72 0
223 #define TXTH_96 1
224 #define TXTH_128 2
225 #define TXTH_160 3
226 #define TXTH_SF 4
228 #define TLP_TXTHRESH_TAB_DM9102 { \
229 { OPMODE_TR_72, "72/128 bytes" }, \
230 { OPMODE_TR_96, "96/256 bytes" }, \
231 { OPMODE_TR_128, "128/512 bytes" }, \
232 { OPMODE_SF, "store and forward mode" }, \
233 { 0, NULL }, \
236 #define TXTH_DM9102_72 0
237 #define TXTH_DM9102_96 1
238 #define TXTH_DM9102_128 2
239 #define TXTH_DM9102_SF 3
242 * The Winbond 89C840F does transmit threshold control totally
243 * differently. It simply has a 7-bit field which indicates
244 * the threshold:
246 * txth = ((OPMODE & OPMODE_WINB_TTH) >> OPMODE_WINB_TTH_SHIFT) * 16;
248 * However, we just do Store-and-Forward mode on these chips, since
249 * the DMA engines seem to be flaky.
251 #define TLP_TXTHRESH_TAB_WINB { \
252 { 0, "store and forward mode" }, \
253 { 0, NULL }, \
256 #define TXTH_WINB_SF 0
259 * Settings for Tulip SIA media.
261 struct tulip_sia_media {
262 uint32_t tsm_siaconn; /* CSR13 value */
263 uint32_t tsm_siatxrx; /* CSR14 value */
264 uint32_t tsm_siagen; /* CSR15 value */
268 * Description of 2x14x media.
270 struct tulip_21x4x_media {
271 int tm_type; /* type of media; see tulipreg.h */
272 const char *tm_name; /* name of media */
274 void (*tm_get)(struct tulip_softc *, struct ifmediareq *);
275 int (*tm_set)(struct tulip_softc *);
277 int tm_phyno; /* PHY # on MII */
279 int tm_gp_length; /* MII select sequence length */
280 int tm_gp_offset; /* MII select sequence offset */
282 int tm_reset_length;/* MII reset sequence length */
283 int tm_reset_offset;/* MII reset sequence offset */
285 uint32_t tm_opmode; /* OPMODE bits for this media */
286 uint32_t tm_gpctl; /* GPIO control bits for this media */
287 uint32_t tm_gpdata; /* GPIO bits for this media */
288 uint32_t tm_actmask; /* `active' bits for this data */
289 uint32_t tm_actdata; /* active high/low info */
291 struct tulip_sia_media tm_sia; /* SIA settings */
292 #define tm_siaconn tm_sia.tsm_siaconn
293 #define tm_siatxrx tm_sia.tsm_siatxrx
294 #define tm_siagen tm_sia.tsm_siagen
298 * Table for converting Tulip SROM media info into ifmedia data.
300 struct tulip_srom_to_ifmedia {
301 uint8_t tsti_srom; /* SROM media type */
302 int tsti_subtype; /* ifmedia subtype */
303 int tsti_options; /* ifmedia options */
304 const char *tsti_name; /* media name */
306 uint32_t tsti_opmode; /* OPMODE bits for this media */
307 uint32_t tsti_sia_cap; /* "MII" capabilities for this media */
310 * Settings for 21040, 21041, and 21142/21143 SIA, in the event
311 * the SROM doesn't have them.
313 struct tulip_sia_media tsti_21040;
314 struct tulip_sia_media tsti_21041;
315 struct tulip_sia_media tsti_21142;
319 * Some misc. statics, useful for debugging.
321 struct tulip_stats {
322 u_long ts_tx_uf; /* transmit underflow errors */
323 u_long ts_tx_to; /* transmit jabber timeouts */
324 u_long ts_tx_ec; /* excessive collision count */
325 u_long ts_tx_lc; /* late collision count */
328 #ifndef _STANDALONE
330 * Software state per device.
332 struct tulip_softc {
333 device_t sc_dev; /* generic device information */
334 bus_space_tag_t sc_st; /* bus space tag */
335 bus_space_handle_t sc_sh; /* bus space handle */
336 bus_dma_tag_t sc_dmat; /* bus DMA tag */
337 struct ethercom sc_ethercom; /* ethernet common data */
339 struct tulip_stats sc_stats; /* debugging stats */
342 * Contents of the SROM.
344 uint8_t *sc_srom;
345 int sc_srom_addrbits;
348 * Media access functions for this chip.
350 const struct tulip_mediasw *sc_mediasw;
351 mii_bitbang_ops_t sc_bitbang_ops;
354 * For chips with built-in NWay blocks, these are state
355 * variables required for autonegotiation.
357 int sc_nway_ticks; /* tick counter */
358 struct ifmedia_entry *sc_nway_active; /* the active media */
359 struct callout sc_nway_callout;
361 tulip_chip_t sc_chip; /* chip type */
362 int sc_rev; /* chip revision */
363 int sc_flags; /* misc flags. */
364 char sc_name[32]; /* board name */
365 uint32_t sc_cacheline; /* cache line size */
366 uint32_t sc_maxburst; /* maximum burst length */
367 int sc_devno; /* PCI device # */
369 struct mii_data sc_mii; /* MII/media information */
371 const struct tulip_txthresh_tab *sc_txth;
372 int sc_txthresh; /* current transmit threshold */
374 uint8_t sc_gp_dir; /* GPIO pin direction bits (21140) */
375 int sc_media_seen; /* ISV media block types seen */
376 int sc_tlp_minst; /* Tulip internal media instance */
377 uint32_t sc_sia_cap; /* SIA media capabilities (21143) */
379 /* Reset function. */
380 void (*sc_reset)(struct tulip_softc *);
382 /* Pre-init function. */
383 void (*sc_preinit)(struct tulip_softc *);
385 /* Filter setup function. */
386 void (*sc_filter_setup)(struct tulip_softc *);
388 /* Media status update function. */
389 void (*sc_statchg)(device_t);
391 /* Media tick function. */
392 void (*sc_tick)(void *);
393 struct callout sc_tick_callout;
395 /* Power management hooks. */
396 int (*sc_enable)(struct tulip_softc *);
397 void (*sc_disable)(struct tulip_softc *);
398 void (*sc_power)(struct tulip_softc *, int);
401 * The Winbond 89C840F places registers 4 bytes apart, instead
402 * of 8.
404 int sc_regshift;
406 uint32_t sc_busmode; /* copy of CSR_BUSMODE */
407 uint32_t sc_opmode; /* copy of CSR_OPMODE */
408 uint32_t sc_inten; /* copy of CSR_INTEN */
410 uint32_t sc_rxint_mask; /* mask of Rx interrupts we want */
411 uint32_t sc_txint_mask; /* mask of Tx interrupts we want */
413 uint32_t sc_filtmode; /* filter mode we're using */
415 bus_dma_segment_t sc_cdseg; /* control data memory */
416 int sc_cdnseg; /* number of segments */
417 bus_dmamap_t sc_cddmamap; /* control data DMA map */
418 #define sc_cddma sc_cddmamap->dm_segs[0].ds_addr
421 * Software state for transmit and receive descriptors.
423 struct tulip_txsoft sc_txsoft[TULIP_TXQUEUELEN];
424 struct tulip_rxsoft sc_rxsoft[TULIP_NRXDESC];
427 * Control data structures.
429 struct tulip_control_data *sc_control_data;
430 #define sc_txdescs sc_control_data->tcd_txdescs
431 #define sc_rxdescs sc_control_data->tcd_rxdescs
432 #define sc_setup_desc sc_control_data->tcd_setup_desc
434 int sc_txfree; /* number of free Tx descriptors */
435 int sc_txnext; /* next ready Tx descriptor */
436 int sc_ntxsegs; /* number of transmit segs per pkt */
438 uint32_t sc_tdctl_ch; /* conditional desc chaining */
439 uint32_t sc_tdctl_er; /* conditional desc end-of-ring */
441 uint32_t sc_setup_fsls; /* FS|LS on setup descriptor */
443 struct tulip_txsq sc_txfreeq; /* free Tx descsofts */
444 struct tulip_txsq sc_txdirtyq; /* dirty Tx descsofts */
446 short sc_if_flags;
448 int sc_rxptr; /* next ready RX descriptor/descsoft */
450 #if NRND > 0
451 rndsource_element_t sc_rnd_source; /* random source */
452 #endif
454 #endif
456 /* sc_flags */
457 #define TULIPF_WANT_SETUP 0x00000001 /* want filter setup */
458 #define TULIPF_DOING_SETUP 0x00000002 /* doing multicast setup */
459 #define TULIPF_HAS_MII 0x00000004 /* has media on MII */
460 #define TULIPF_IC_FS 0x00000008 /* IC bit on first tx seg */
461 #define TULIPF_MRL 0x00000010 /* memory read line okay */
462 #define TULIPF_MRM 0x00000020 /* memory read multi okay */
463 #define TULIPF_MWI 0x00000040 /* memory write inval okay */
464 #define TULIPF_AUTOPOLL 0x00000080 /* chip supports auto-poll */
465 #define TULIPF_LINK_UP 0x00000100 /* link is up (non-MII) */
466 #define TULIPF_LINK_VALID 0x00000200 /* link state valid */
467 #define TULIPF_DOINGAUTO 0x00000400 /* doing autoneg (non-MII) */
468 #define TULIPF_ATTACHED 0x00000800 /* attach has succeeded */
469 #define TULIPF_ENABLED 0x00001000 /* chip is enabled */
470 #define TULIPF_BLE 0x00002000 /* data is big endian */
471 #define TULIPF_DBO 0x00004000 /* descriptor is big endian */
472 #define TULIPF_VPC 0x00008000 /* Virtual PC Ethernet */
474 #define TULIP_IS_ENABLED(sc) ((sc)->sc_flags & TULIPF_ENABLED)
477 * This macro returns the current media entry.
479 #define TULIP_CURRENT_MEDIA(sc) ((sc)->sc_mii.mii_media.ifm_cur)
482 * This macro determines if a change to media-related OPMODE bits requires
483 * a chip reset.
485 #define TULIP_MEDIA_NEEDSRESET(sc, newbits) \
486 (((sc)->sc_opmode & OPMODE_MEDIA_BITS) != \
487 ((newbits) & OPMODE_MEDIA_BITS))
489 #define TULIP_CDTXADDR(sc, x) ((sc)->sc_cddma + TULIP_CDTXOFF((x)))
490 #define TULIP_CDRXADDR(sc, x) ((sc)->sc_cddma + TULIP_CDRXOFF((x)))
492 #define TULIP_CDSPADDR(sc) ((sc)->sc_cddma + TULIP_CDSPOFF)
494 #define TULIP_CDSP(sc) ((sc)->sc_control_data->tcd_setup_packet)
496 #define TULIP_CDTXSYNC(sc, x, n, ops) \
497 do { \
498 int __x, __n; \
500 __x = (x); \
501 __n = (n); \
503 /* If it will wrap around, sync to the end of the ring. */ \
504 if ((__x + __n) > TULIP_NTXDESC) { \
505 bus_dmamap_sync((sc)->sc_dmat, (sc)->sc_cddmamap, \
506 TULIP_CDTXOFF(__x), sizeof(struct tulip_desc) * \
507 (TULIP_NTXDESC - __x), (ops)); \
508 __n -= (TULIP_NTXDESC - __x); \
509 __x = 0; \
512 /* Now sync whatever is left. */ \
513 bus_dmamap_sync((sc)->sc_dmat, (sc)->sc_cddmamap, \
514 TULIP_CDTXOFF(__x), sizeof(struct tulip_desc) * __n, (ops)); \
515 } while (0)
517 #define TULIP_CDRXSYNC(sc, x, ops) \
518 bus_dmamap_sync((sc)->sc_dmat, (sc)->sc_cddmamap, \
519 TULIP_CDRXOFF((x)), sizeof(struct tulip_desc), (ops))
521 #define TULIP_CDSPSYNC(sc, ops) \
522 bus_dmamap_sync((sc)->sc_dmat, (sc)->sc_cddmamap, \
523 TULIP_CDSPOFF, TULIP_SETUP_PACKET_LEN, (ops))
526 * Note we rely on MCLBYTES being a power of two. Because the `length'
527 * field is only 11 bits, we must subtract 1 from the length to avoid
528 * having it truncated to 0!
530 #define TULIP_INIT_RXDESC(sc, x) \
531 do { \
532 struct tulip_rxsoft *__rxs = &sc->sc_rxsoft[(x)]; \
533 struct tulip_desc *__rxd = &sc->sc_rxdescs[(x)]; \
534 struct mbuf *__m = __rxs->rxs_mbuf; \
536 __m->m_data = __m->m_ext.ext_buf; \
537 __rxd->td_bufaddr1 = \
538 htole32(__rxs->rxs_dmamap->dm_segs[0].ds_addr); \
539 __rxd->td_bufaddr2 = \
540 htole32(TULIP_CDRXADDR((sc), TULIP_NEXTRX((x)))); \
541 __rxd->td_ctl = \
542 htole32((((__m->m_ext.ext_size - 1) & ~0x3U) \
543 << TDCTL_SIZE1_SHIFT) | (sc)->sc_tdctl_ch | \
544 ((x) == (TULIP_NRXDESC - 1) ? sc->sc_tdctl_er : 0)); \
545 __rxd->td_status = htole32(TDSTAT_OWN|TDSTAT_Rx_FS|TDSTAT_Rx_LS); \
546 TULIP_CDRXSYNC((sc), (x), BUS_DMASYNC_PREREAD|BUS_DMASYNC_PREWRITE); \
547 } while (0)
549 /* CSR access */
550 #define TULIP_CSR_OFFSET(sc, csr) \
551 (TULIP_CSR_INDEX(csr) << (sc)->sc_regshift)
553 #define TULIP_READ(sc, reg) \
554 bus_space_read_4((sc)->sc_st, (sc)->sc_sh, \
555 TULIP_CSR_OFFSET((sc), (reg)))
557 #define TULIP_WRITE(sc, reg, val) \
558 bus_space_write_4((sc)->sc_st, (sc)->sc_sh, \
559 TULIP_CSR_OFFSET((sc), (reg)), (val))
561 #define TULIP_SET(sc, reg, mask) \
562 TULIP_WRITE((sc), (reg), TULIP_READ((sc), (reg)) | (mask))
564 #define TULIP_CLR(sc, reg, mask) \
565 TULIP_WRITE((sc), (reg), TULIP_READ((sc), (reg)) & ~(mask))
567 #define TULIP_ISSET(sc, reg, mask) \
568 (TULIP_READ((sc), (reg)) & (mask))
570 #define TULIP_SP_FIELD_C(a, b) ((b) << 8 | (a))
571 #define TULIP_SP_FIELD(x, f) TULIP_SP_FIELD_C((x)[f * 2], (x)[f * 2 + 1])
573 #ifdef _KERNEL
574 extern const char * const tlp_chip_names[];
576 extern const struct tulip_mediasw tlp_21040_mediasw;
577 extern const struct tulip_mediasw tlp_21040_tp_mediasw;
578 extern const struct tulip_mediasw tlp_21040_auibnc_mediasw;
579 extern const struct tulip_mediasw tlp_21041_mediasw;
580 extern const struct tulip_mediasw tlp_2114x_isv_mediasw;
581 extern const struct tulip_mediasw tlp_sio_mii_mediasw;
582 extern const struct tulip_mediasw tlp_pnic_mediasw;
583 extern const struct tulip_mediasw tlp_pmac_mediasw;
584 extern const struct tulip_mediasw tlp_al981_mediasw;
585 extern const struct tulip_mediasw tlp_an985_mediasw;
586 extern const struct tulip_mediasw tlp_dm9102_mediasw;
587 extern const struct tulip_mediasw tlp_asix_mediasw;
588 extern const struct tulip_mediasw tlp_rs7112_mediasw;
590 int tlp_attach(struct tulip_softc *, const uint8_t *);
591 int tlp_activate(device_t, enum devact);
592 int tlp_detach(struct tulip_softc *);
593 int tlp_intr(void *);
594 int tlp_read_srom(struct tulip_softc *);
595 int tlp_srom_crcok(const uint8_t *);
596 int tlp_isv_srom(const uint8_t *);
597 int tlp_isv_srom_enaddr(struct tulip_softc *, uint8_t *);
598 int tlp_parse_old_srom(struct tulip_softc *, uint8_t *);
599 void tlp_reset(struct tulip_softc *);
600 void tlp_idle(struct tulip_softc *, uint32_t);
602 int tlp_mediachange(struct ifnet *);
603 void tlp_mediastatus(struct ifnet *, struct ifmediareq *);
605 void tlp_21140_gpio_get(struct tulip_softc *sc, struct ifmediareq *ifmr);
606 int tlp_21140_gpio_set(struct tulip_softc *sc);
608 #endif /* _KERNEL */
610 #endif /* _DEV_IC_TULIPVAR_H_ */