1 /* $NetBSD: if_atureg.h,v 1.7 2009/09/04 17:53:58 dyoung Exp $ */
2 /* $OpenBSD: if_atureg.h,v 1.21 2004/12/23 13:19:38 dlg Exp $ */
5 * Daan Vreeken <Danovitsch@Vitsch.net>. All rights reserved.
7 * Redistribution and use in source and binary forms, with or without
8 * modification, are permitted provided that the following conditions
10 * 1. Redistributions of source code must retain the above copyright
11 * notice, this list of conditions and the following disclaimer.
12 * 2. Redistributions in binary form must reproduce the above copyright
13 * notice, this list of conditions and the following disclaimer in the
14 * documentation and/or other materials provided with the distribution.
15 * 3. All advertising materials mentioning features or use of this software
16 * must display the following acknowledgement:
17 * This product includes software developed by Daan Vreeken.
18 * 4. Neither the name of the author nor the names of any co-contributors
19 * may be used to endorse or promote products derived from this software
20 * without specific prior written permission.
22 * THIS SOFTWARE IS PROVIDED BY DAAN VREEKEN AND CONTRIBUTORS ``AS IS'' AND
23 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
24 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
25 * ARE DISCLAIMED. IN NO EVENT SHALL Daan Vreeken OR THE VOICES IN HIS HEAD
26 * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
27 * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
28 * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
29 * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
30 * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
31 * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF
32 * THE POSSIBILITY OF SUCH DAMAGE.
36 #define ATU_CONFIG_NO 1
37 #define ATU_IFACE_IDX 0
39 /* the number of simultaniuously requested RX transfers */
40 #define ATU_RX_LIST_CNT 1
43 * the number of simultaniously started TX transfers
52 * 128 535.67 KB/sec (before you ask : yes, 128 is silly :)
55 #define ATU_TX_LIST_CNT 8
58 * According to the 802.11 spec (7.1.2) the frame body can be up to 2312 bytes
60 #define ATU_RX_BUFSZ (ATU_RX_HDRLEN + \
61 sizeof(struct ieee80211_frame_addr4) + 2312 + 4)
62 /* BE CAREFULL! should add ATU_TX_PADDING */
63 #define ATU_TX_BUFSZ (ATU_TX_HDRLEN + \
64 sizeof(struct ieee80211_frame_addr4) + 2312)
66 #define ATU_MIN_FRAMELEN 60
69 * Sending packets of more than 1500 bytes confuses some access points, so the
70 * default MTU is set to 1500 but can be increased up to 2310 bytes using
73 #define ATU_DEFAULT_MTU 1500
74 #define ATU_MAX_MTU (2312 - 2)
76 #define ATU_ENDPT_RX 0x0
77 #define ATU_ENDPT_TX 0x1
78 #define ATU_ENDPT_MAX 0x2
80 #define ATU_TX_TIMEOUT 10000
81 #define ATU_JOIN_TIMEOUT 2000
83 #define ATU_NO_QUIRK 0x0000
84 #define ATU_QUIRK_NO_REMAP 0x0001
85 #define ATU_QUIRK_FW_DELAY 0x0002
87 #define ATU_DEFAULT_SSID ""
88 #define ATU_DEFAULT_CHANNEL 10
100 enum atu_radio_type atu_radio
;
107 struct atu_softc
*atu_sc
;
108 usbd_xfer_handle atu_xfer
;
110 struct mbuf
*atu_mbuf
;
112 u_int16_t atu_length
;
114 SLIST_ENTRY(atu_chain
) atu_list
;
118 struct atu_chain atu_tx_chain
[ATU_TX_LIST_CNT
];
119 struct atu_chain atu_rx_chain
[ATU_RX_LIST_CNT
];
121 SLIST_HEAD(atu_list_head
, atu_chain
) atu_rx_free
;
122 struct atu_list_head atu_tx_free
;
124 u_int8_t atu_tx_inuse
;
125 u_int8_t atu_tx_last_idx
;
128 #define MAX_SSID_LEN 32
129 #define ATU_AVG_TIME 20
133 struct ethercom sc_ec
;
134 struct ieee80211com sc_ic
;
135 int (*sc_newstate
)(struct ieee80211com
*,
136 enum ieee80211_state
, int);
141 #define ATU_S_UNCONFIG 2
146 struct usb_task sc_task
;
148 usbd_device_handle atu_udev
;
149 usbd_interface_handle atu_iface
;
150 struct ethercom atu_ec
;
151 struct ifmedia atu_media
;
152 int atu_ed
[ATU_ENDPT_MAX
];
153 usbd_pipe_handle atu_ep
[ATU_ENDPT_MAX
];
157 struct atu_cdata atu_cdata
;
159 struct timeval atu_rx_notice
;
161 u_int8_t atu_bssid
[ETHER_ADDR_LEN
];
162 enum atu_radio_type atu_radio
;
165 u_int8_t atu_channel
;
166 u_int16_t atu_desired_channel
;
168 #define NO_MODE_YET 0
169 #define AD_HOC_MODE 1
170 #define INFRASTRUCTURE_MODE 2
172 u_int8_t atu_radio_on
;
173 u_int8_t atu_encrypt
;
174 #define ATU_WEP_RX 0x01
175 #define ATU_WEP_TX 0x02
176 #define ATU_WEP_TXRX (ATU_WEP_RX | ATU_WEP_TX)
179 u_int8_t atu_wepkeys
[4][13];
182 #define sc_if sc_ec.ec_if
184 /* Commands for uploading the firmware (standard DFU interface) */
185 #define DFU_DNLOAD UT_WRITE_CLASS_INTERFACE, 0x01
186 #define DFU_GETSTATUS UT_READ_CLASS_INTERFACE, 0x03
187 #define DFU_GETSTATE UT_READ_CLASS_INTERFACE, 0x05
188 #define DFU_REMAP UT_WRITE_VENDOR_INTERFACE, 0x0a
191 #define DFUState_AppIdle 0
192 #define DFUState_AppDetach 1
193 #define DFUState_DFUIdle 2
194 #define DFUState_DnLoadSync 3
195 #define DFUState_DnLoadBusy 4
196 #define DFUState_DnLoadIdle 5
197 #define DFUState_ManifestSync 6
198 #define DFUState_Manifest 7
199 #define DFUState_ManifestWait 8
200 #define DFUState_UploadIdle 9
201 #define DFUState_DFUError 10
203 #define DFU_MaxBlockSize 1024
205 /* AT76c503 operating modes */
206 #define MODE_NONE 0x00
207 #define MODE_NETCARD 0x01
208 #define MODE_CONFIG 0x02
209 #define MODE_DFU 0x03
210 #define MODE_NOFLASHNETCARD 0x04
212 /* AT76c503 commands */
213 #define CMD_SET_MIB 0x01
214 #define CMD_START_SCAN 0x03
215 #define CMD_JOIN 0x04
216 #define CMD_START_IBSS 0x05
217 #define CMD_RADIO 0x06
218 #define CMD_RADIO_ON 0x06
219 #define CMD_RADIO_OFF 0x07
220 #define CMD_STARTUP 0x0b
222 /* AT76c503 status messages - used in atu_wait_completion */
223 #define STATUS_IDLE 0x00
224 #define STATUS_COMPLETE 0x01
225 #define STATUS_UNKNOWN 0x02
226 #define STATUS_INVALID_PARAMETER 0x03
227 #define STATUS_FUNCTION_NOT_SUPPORTED 0x04
228 #define STATUS_TIME_OUT 0x07
229 #define STATUS_IN_PROGRESS 0x08
230 #define STATUS_HOST_FAILURE 0xff
231 #define STATUS_SCAN_FAILED 0xf0
233 /* AT76c503 command header */
240 /* CMD_SET_MIB command (0x01) */
241 struct atu_cmd_set_mib
{
242 /* AT76c503 command header */
257 /* CMD_STARTUP command (0x0b) */
258 struct atu_cmd_card_config
{
263 uByte ExcludeUnencrypted
;
264 uByte PromiscuousMode
;
265 uByte ShortRetryLimit
;
266 uByte EncryptionType
;
268 uWord FragThreshold
; /* 256 .. 2346 */
269 uByte BasicRateSet
[4];
270 uByte AutoRateFallback
;
272 uByte PrivacyInvoked
; /* wep */
273 uByte WEP_DefaultKeyID
; /* 0 .. 3 */
274 uByte SSID
[MAX_SSID_LEN
];
275 uByte WEP_DefaultKey
[4][13];
281 /* CMD_SCAN command (0x03) */
282 struct atu_cmd_do_scan
{
287 uByte BSSID
[ETHER_ADDR_LEN
];
288 uByte SSID
[MAX_SSID_LEN
];
292 uWord MinChannelTime
;
293 uWord MaxChannelTime
;
295 uByte InternationalScan
;
298 #define ATU_SCAN_ACTIVE 0x00
299 #define ATU_SCAN_PASSIVE 0x01
301 /* CMD_JOIN command (0x04) */
302 struct atu_cmd_join
{
307 uByte bssid
[ETHER_ADDR_LEN
];
316 /* CMD_START_IBSS (0x05) */
317 struct atu_cmd_start_ibss
{
322 uByte BSSID
[ETHER_ADDR_LEN
];
331 * The At76c503 adapters come with different types of radios on them.
332 * At this moment the driver supports adapters with RFMD and Intersil radios.
335 /* The config structure of an RFMD radio */
336 struct atu_rfmd_conf
{
341 u_int8_t MACAddr
[ETHER_ADDR_LEN
];
342 u_int8_t RegulatoryDomain
;
343 u_int8_t LowPowerValues
[14];
344 u_int8_t NormalPowerValues
[14];
345 u_int8_t Reserved
[3];
346 /* then we have 84 bytes, somehow Windows reads 95?? */
350 /* The config structure of an Intersil radio */
351 struct atu_intersil_conf
{
352 u_int8_t MACAddr
[ETHER_ADDR_LEN
];
353 /* From the HFA3861B manual : */
354 /* Manual TX power control (7bit : -64 to 63) */
356 /* TX power measurement */
359 u_int8_t RegulatoryDomain
;
360 u_int8_t Reserved
[1];
364 /* Firmware information request */
373 * The header the AT76c503 puts in front of RX packets (for both managment &
386 #define ATU_RX_HDRLEN sizeof(struct atu_rx_hdr)
389 * The header we have to put in front of a TX packet before sending it to the
398 #define ATU_TX_HDRLEN sizeof(struct atu_tx_hdr)
400 #define NR(x) (void *)((long)x)
403 * The linux driver uses separate routines for every mib request they do
404 * (eg. set_radio / set_preamble / set_frag / etc etc )
405 * We just define a list of types, sizes and offsets and use those
408 /* Name Type Size Index */
409 #define MIB_LOCAL 0x01
410 #define MIB_LOCAL__BEACON_ENABLE MIB_LOCAL, 1, 2
411 #define MIB_LOCAL__AUTO_RATE_FALLBACK MIB_LOCAL, 1, 3
412 #define MIB_LOCAL__SSID_SIZE MIB_LOCAL, 1, 5
413 #define MIB_LOCAL__PREAMBLE MIB_LOCAL, 1, 9
414 #define MIB_MAC_ADDR 0x02
415 #define MIB_MAC_ADDR__ADDR MIB_MAC_ADDR, 6, 0
417 #define MIB_MAC__FRAG MIB_MAC, 2, 8
418 #define MIB_MAC__RTS MIB_MAC, 2, 10
419 #define MIB_MAC__DESIRED_SSID MIB_MAC, 32, 28
420 #define MIB_MAC_MGMT 0x05
421 #define MIB_MAC_MGMT__BEACON_PERIOD MIB_MAC_MGMT, 2, 0
422 #define MIB_MAC_MGMT__CURRENT_BSSID MIB_MAC_MGMT, 6, 14
423 #define MIB_MAC_MGMT__CURRENT_ESSID MIB_MAC_MGMT, 32, 20
424 #define MIB_MAC_MGMT__POWER_MODE MIB_MAC_MGMT, 1, 53
425 #define MIB_MAC_MGMT__IBSS_CHANGE MIB_MAC_MGMT, 1, 54
426 #define MIB_MAC_WEP 0x06
427 #define MIB_MAC_WEP__PRIVACY_INVOKED MIB_MAC_WEP, 1, 0
428 #define MIB_MAC_WEP__KEY_ID MIB_MAC_WEP, 1, 1
429 #define MIB_MAC_WEP__ICV_ERROR_COUNT MIB_MAC_WEP, 4, 4
430 #define MIB_MAC_WEP__EXCLUDED_COUNT MIB_MAC_WEP, 4, 8
431 #define MIB_MAC_WEP__KEYS(nr) MIB_MAC_WEP, 13, 12+(nr)*13
432 #define MIB_MAC_WEP__ENCR_LEVEL MIB_MAC_WEP, 1, 64
434 #define MIB_PHY__CHANNEL MIB_PHY, 1, 20
435 #define MIB_PHY__REG_DOMAIN MIB_PHY, 1, 23
436 #define MIB_FW_VERSION 0x08
437 #define MIB_DOMAIN 0x09
438 #define MIB_DOMAIN__POWER_LEVELS MIB_DOMAIN, 14, 0
439 #define MIB_DOMAIN__CHANNELS MIB_DOMAIN, 14, 14
441 #define ATU_WEP_OFF 0
442 #define ATU_WEP_40BITS 1
443 #define ATU_WEP_104BITS 2
445 #define POWER_MODE_ACTIVE 1
446 #define POWER_MODE_SAVE 2
447 #define POWER_MODE_SMART 3
449 #define PREAMBLE_SHORT 1
450 #define PREAMBLE_LONG 0