1 /* $NetBSD: if_kuereg.h,v 1.10 2000/03/29 18:24:53 augustss Exp $ */
3 * Copyright (c) 1997, 1998, 1999, 2000
4 * Bill Paul <wpaul@ee.columbia.edu>. All rights reserved.
6 * Redistribution and use in source and binary forms, with or without
7 * modification, are permitted provided that the following conditions
9 * 1. Redistributions of source code must retain the above copyright
10 * notice, this list of conditions and the following disclaimer.
11 * 2. Redistributions in binary form must reproduce the above copyright
12 * notice, this list of conditions and the following disclaimer in the
13 * documentation and/or other materials provided with the distribution.
14 * 3. All advertising materials mentioning features or use of this software
15 * must display the following acknowledgement:
16 * This product includes software developed by Bill Paul.
17 * 4. Neither the name of the author nor the names of any co-contributors
18 * may be used to endorse or promote products derived from this software
19 * without specific prior written permission.
21 * THIS SOFTWARE IS PROVIDED BY Bill Paul AND CONTRIBUTORS ``AS IS'' AND
22 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
23 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
24 * ARE DISCLAIMED. IN NO EVENT SHALL Bill Paul OR THE VOICES IN HIS HEAD
25 * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
26 * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
27 * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
28 * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
29 * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
30 * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF
31 * THE POSSIBILITY OF SUCH DAMAGE.
33 * $FreeBSD: src/sys/dev/usb/if_kuereg.h,v 1.2 2000/01/06 07:39:07 wpaul Exp $
37 * Definitions for the KLSI KL5KUSB101B USB to ethernet controller.
38 * The KLSI part is controlled via vendor control requests, the structure
39 * of which depend a bit on the firmware running on the internal
40 * microcontroller. The one exception is the 'send scan data' command,
41 * which is used to load the firmware.
44 #define KUE_CONFIG_NO 1
45 #define KUE_IFACE_IDX 0
47 #define KUE_CMD_GET_ETHER_DESCRIPTOR 0x00
48 #define KUE_CMD_SET_MCAST_FILTERS 0x01
49 #define KUE_CMD_SET_PKT_FILTER 0x02
50 #define KUE_CMD_GET_ETHERSTATS 0x03
51 #define KUE_CMD_GET_GPIO 0x04
52 #define KUE_CMD_SET_GPIO 0x05
53 #define KUE_CMD_SET_MAC 0x06
54 #define KUE_CMD_GET_MAC 0x07
55 #define KUE_CMD_SET_URB_SIZE 0x08
56 #define KUE_CMD_SET_SOFS 0x09
57 #define KUE_CMD_SET_EVEN_PKTS 0x0A
58 #define KUE_CMD_SEND_SCAN 0xFF
60 struct kue_ether_desc
{
64 u_int8_t kue_macaddr
[ETHER_ADDR_LEN
];
65 u_int8_t kue_etherstats
[4];
66 u_int8_t kue_maxseg
[2];
67 u_int8_t kue_mcastfilt
[2];
71 #define KUE_ETHERSTATS(x) \
72 (*(u_int32_t *)&(x)->kue_desc.kue_etherstats)
73 #define KUE_MAXSEG(x) \
74 (*(u_int16_t *)&(x)->kue_desc.kue_maxseg)
75 #define KUE_MCFILTCNT(x) \
76 ((*(u_int16_t *)&(x)->kue_desc.kue_mcastfilt) & 0x7FFF)
77 #define KUE_MCFILT(x, y) \
78 (char *)&(sc->kue_mcfilters[y * ETHER_ADDR_LEN])
80 #define KUE_STAT_TX_OK 0x00000001
81 #define KUE_STAT_RX_OK 0x00000002
82 #define KUE_STAT_TX_ERR 0x00000004
83 #define KUE_STAT_RX_ERR 0x00000008
84 #define KUE_STAT_RX_NOBUF 0x00000010
85 #define KUE_STAT_TX_UCAST_BYTES 0x00000020
86 #define KUE_STAT_TX_UCAST_FRAMES 0x00000040
87 #define KUE_STAT_TX_MCAST_BYTES 0x00000080
88 #define KUE_STAT_TX_MCAST_FRAMES 0x00000100
89 #define KUE_STAT_TX_BCAST_BYTES 0x00000200
90 #define KUE_STAT_TX_BCAST_FRAMES 0x00000400
91 #define KUE_STAT_RX_UCAST_BYTES 0x00000800
92 #define KUE_STAT_RX_UCAST_FRAMES 0x00001000
93 #define KUE_STAT_RX_MCAST_BYTES 0x00002000
94 #define KUE_STAT_RX_MCAST_FRAMES 0x00004000
95 #define KUE_STAT_RX_BCAST_BYTES 0x00008000
96 #define KUE_STAT_RX_BCAST_FRAMES 0x00010000
97 #define KUE_STAT_RX_CRCERR 0x00020000
98 #define KUE_STAT_TX_QUEUE_LENGTH 0x00040000
99 #define KUE_STAT_RX_ALIGNERR 0x00080000
100 #define KUE_STAT_TX_SINGLECOLL 0x00100000
101 #define KUE_STAT_TX_MULTICOLL 0x00200000
102 #define KUE_STAT_TX_DEFERRED 0x00400000
103 #define KUE_STAT_TX_MAXCOLLS 0x00800000
104 #define KUE_STAT_RX_OVERRUN 0x01000000
105 #define KUE_STAT_TX_UNDERRUN 0x02000000
106 #define KUE_STAT_TX_SQE_ERR 0x04000000
107 #define KUE_STAT_TX_CARRLOSS 0x08000000
108 #define KUE_STAT_RX_LATECOLL 0x10000000
110 #define KUE_RXFILT_PROMISC 0x0001
111 #define KUE_RXFILT_ALLMULTI 0x0002
112 #define KUE_RXFILT_UNICAST 0x0004
113 #define KUE_RXFILT_BROADCAST 0x0008
114 #define KUE_RXFILT_MULTICAST 0x0010
116 #define KUE_TIMEOUT 1000
117 #define ETHER_ALIGN 2
118 #define KUE_BUFSZ 1536
119 #define KUE_MIN_FRAMELEN 60
121 #define KUE_RX_LIST_CNT 1
122 #define KUE_TX_LIST_CNT 1
124 #define KUE_CTL_READ 0x01
125 #define KUE_CTL_WRITE 0x02
127 #define KUE_WARM_REV 0x0202
130 * The interrupt endpoint is currently unused
133 #define KUE_ENDPT_RX 0x0
134 #define KUE_ENDPT_TX 0x1
135 #define KUE_ENDPT_INTR 0x2
136 #define KUE_ENDPT_MAX 0x3
146 struct kue_softc
*kue_sc
;
147 usbd_xfer_handle kue_xfer
;
149 struct mbuf
*kue_mbuf
;
154 struct kue_chain kue_tx_chain
[KUE_TX_LIST_CNT
];
155 struct kue_chain kue_rx_chain
[KUE_RX_LIST_CNT
];
163 USBBASEDEVICE kue_dev
;
165 #if defined(__FreeBSD__) || defined(__OpenBSD__)
166 struct arpcom arpcom
;
167 #define GET_IFP(sc) (&(sc)->arpcom.ac_if)
168 #elif defined(__NetBSD__)
169 struct ethercom kue_ec
;
171 rndsource_element_t rnd_source
;
173 #define GET_IFP(sc) (&(sc)->kue_ec.ec_if)
176 usbd_device_handle kue_udev
;
177 usbd_interface_handle kue_iface
;
178 u_int16_t kue_vendor
;
179 u_int16_t kue_product
;
180 struct kue_ether_desc kue_desc
;
181 int kue_ed
[KUE_ENDPT_MAX
];
182 usbd_pipe_handle kue_ep
[KUE_ENDPT_MAX
];
184 u_int16_t kue_rxfilt
;
185 u_int8_t
*kue_mcfilters
;
186 struct kue_cdata kue_cdata
;
191 struct timeval kue_rx_notice
;