1 /* $NetBSD: ucomvar.h,v 1.16 2008/04/28 20:23:59 martin Exp $ */
4 * Copyright (c) 1999 The NetBSD Foundation, Inc.
7 * This code is derived from software contributed to The NetBSD Foundation
8 * by Lennart Augustsson (lennart@augustsson.net) at
9 * Carlstedt Research & Technology.
11 * Redistribution and use in source and binary forms, with or without
12 * modification, are permitted provided that the following conditions
14 * 1. Redistributions of source code must retain the above copyright
15 * notice, this list of conditions and the following disclaimer.
16 * 2. Redistributions in binary form must reproduce the above copyright
17 * notice, this list of conditions and the following disclaimer in the
18 * documentation and/or other materials provided with the distribution.
20 * THIS SOFTWARE IS PROVIDED BY THE NETBSD FOUNDATION, INC. AND CONTRIBUTORS
21 * ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED
22 * TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
23 * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS
24 * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
25 * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
26 * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
27 * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
28 * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
29 * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
30 * POSSIBILITY OF SUCH DAMAGE.
34 /* just for ucom_attach_args, not in the config namespace */
35 #define UCOM_UNK_PORTNO (-1)
40 void (*ucom_get_status
)(void *sc
, int portno
, u_char
*lsr
, u_char
*msr
);
41 void (*ucom_set
)(void *sc
, int portno
, int reg
, int onoff
);
42 #define UCOM_SET_DTR 1
43 #define UCOM_SET_RTS 2
44 #define UCOM_SET_BREAK 3
45 int (*ucom_param
)(void *sc
, int portno
, struct termios
*);
46 int (*ucom_ioctl
)(void *sc
, int portno
, u_long cmd
,
47 void *data
, int flag
, usb_proc_ptr p
);
48 int (*ucom_open
)(void *sc
, int portno
);
49 void (*ucom_close
)(void *sc
, int portno
);
50 void (*ucom_read
)(void *sc
, int portno
, u_char
**ptr
, u_int32_t
*count
);
51 void (*ucom_write
)(void *sc
, int portno
, u_char
*to
, u_char
*from
,
55 /* modem control register */
56 #define UMCR_RTS 0x02 /* Request To Send */
57 #define UMCR_DTR 0x01 /* Data Terminal Ready */
59 /* line status register */
60 #define ULSR_RCV_FIFO 0x80
61 #define ULSR_TSRE 0x40 /* Transmitter empty: byte sent */
62 #define ULSR_TXRDY 0x20 /* Transmitter buffer empty */
63 #define ULSR_BI 0x10 /* Break detected */
64 #define ULSR_FE 0x08 /* Framing error: bad stop bit */
65 #define ULSR_PE 0x04 /* Parity error */
66 #define ULSR_OE 0x02 /* Overrun, lost incoming byte */
67 #define ULSR_RXRDY 0x01 /* Byte ready in Receive Buffer */
68 #define ULSR_RCV_MASK 0x1f /* Mask for incoming data or error */
70 /* modem status register */
71 /* All deltas are from the last read of the MSR. */
72 #define UMSR_DCD 0x80 /* Current Data Carrier Detect */
73 #define UMSR_RI 0x40 /* Current Ring Indicator */
74 #define UMSR_DSR 0x20 /* Current Data Set Ready */
75 #define UMSR_CTS 0x10 /* Current Clear to Send */
76 #define UMSR_DDCD 0x08 /* DCD has changed state */
77 #define UMSR_TERI 0x04 /* RI has toggled low to high */
78 #define UMSR_DDSR 0x02 /* DSR has changed state */
79 #define UMSR_DCTS 0x01 /* CTS has changed state */
81 struct ucom_attach_args
{
89 const char *info
; /* attach message */
90 usbd_device_handle device
;
91 usbd_interface_handle iface
;
92 struct ucom_methods
*methods
;
96 int ucomprint(void *, const char *);
97 int ucomsubmatch(device_t t
, cfdata_t
, const int *, void *);
98 void ucom_status_change(struct ucom_softc
*);