sys/external/isc/atheros_hal/dist/ar5416/ar9160_attach.c

   1 /*
   2  * Copyright (c) 2008 Sam Leffler, Errno Consulting
   3  * Copyright (c) 2008 Atheros Communications, Inc.
   4  *
   5  * Permission to use, copy, modify, and/or distribute this software for any
   6  * purpose with or without fee is hereby granted, provided that the above
   7  * copyright notice and this permission notice appear in all copies.
   8  *
   9  * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
  10  * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
  11  * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
  12  * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
  13  * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
  14  * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
  15  * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
  16  *
  17  * $Id: ar9160_attach.c,v 1.1.1.1 2008/12/11 04:46:51 alc Exp $
  18  */
  19 #include "opt_ah.h"
  20
  21 #include "ah.h"
  22 #include "ah_internal.h"
  23 #include "ah_devid.h"
  24
  25 #include "ar5416/ar5416.h"
  26 #include "ar5416/ar5416reg.h"
  27 #include "ar5416/ar5416phy.h"
  28
  29 #include "ar5416/ar9160.ini"
  30
  31 static const HAL_PERCAL_DATA ar9160_iq_cal = {          /* multi sample */
  32         .calName = "IQ", .calType = IQ_MISMATCH_CAL,
  33         .calNumSamples  = MAX_CAL_SAMPLES,
  34         .calCountMax    = PER_MIN_LOG_COUNT,
  35         .calCollect     = ar5416IQCalCollect,
  36         .calPostProc    = ar5416IQCalibration
  37 };
  38 static const HAL_PERCAL_DATA ar9160_adc_gain_cal = {    /* multi sample */
  39         .calName = "ADC Gain", .calType = ADC_GAIN_CAL,
  40         .calNumSamples  = MAX_CAL_SAMPLES,
  41         .calCountMax    = PER_MIN_LOG_COUNT,
  42         .calCollect     = ar5416AdcGainCalCollect,
  43         .calPostProc    = ar5416AdcGainCalibration
  44 };
  45 static const HAL_PERCAL_DATA ar9160_adc_dc_cal = {      /* multi sample */
  46         .calName = "ADC DC", .calType = ADC_DC_CAL,
  47         .calNumSamples  = MAX_CAL_SAMPLES,
  48         .calCountMax    = PER_MIN_LOG_COUNT,
  49         .calCollect     = ar5416AdcDcCalCollect,
  50         .calPostProc    = ar5416AdcDcCalibration
  51 };
  52 static const HAL_PERCAL_DATA ar9160_adc_init_dc_cal = {
  53         .calName = "ADC Init DC", .calType = ADC_DC_INIT_CAL,
  54         .calNumSamples  = MIN_CAL_SAMPLES,
  55         .calCountMax    = INIT_LOG_COUNT,
  56         .calCollect     = ar5416AdcDcCalCollect,
  57         .calPostProc    = ar5416AdcDcCalibration
  58 };
  59
  60 struct ath_hal *ar9160Attach(uint16_t devid, HAL_SOFTC sc,
  61         HAL_BUS_TAG st, HAL_BUS_HANDLE sh, HAL_STATUS *status);
  62 static void ar9160Detach(struct ath_hal *);
  63 static HAL_BOOL ar9160FillCapabilityInfo(struct ath_hal *ah);
  64
  65 static void
  66 ar9160AniSetup(struct ath_hal *ah)
  67 {
  68         static const struct ar5212AniParams aniparams = {
  69                 .maxNoiseImmunityLevel  = 4,    /* levels 0..4 */
  70                 .totalSizeDesired       = { -55, -55, -55, -55, -62 },
  71                 .coarseHigh             = { -14, -14, -14, -14, -12 },
  72                 .coarseLow              = { -64, -64, -64, -64, -70 },
  73                 .firpwr                 = { -78, -78, -78, -78, -80 },
  74                 .maxSpurImmunityLevel   = 2,
  75                 .cycPwrThr1             = { 2, 4, 6 },
  76                 .maxFirstepLevel        = 2,    /* levels 0..2 */
  77                 .firstep                = { 0, 4, 8 },
  78                 .ofdmTrigHigh           = 500,
  79                 .ofdmTrigLow            = 200,
  80                 .cckTrigHigh            = 200,
  81                 .cckTrigLow             = 100,
  82                 .rssiThrHigh            = 40,
  83                 .rssiThrLow             = 7,
  84                 .period                 = 100,
  85         };
  86         /* NB: ANI is not enabled yet */
  87         ar5212AniAttach(ah, &aniparams, &aniparams, AH_FALSE);
  88 }
  89
  90 /*
  91  * Attach for an AR9160 part.
  92  */
  93 struct ath_hal *
  94 ar9160Attach(uint16_t devid, HAL_SOFTC sc,
  95         HAL_BUS_TAG st, HAL_BUS_HANDLE sh, HAL_STATUS *status)
  96 {
  97         struct ath_hal_5416 *ahp5416;
  98         struct ath_hal_5212 *ahp;
  99         struct ath_hal *ah;
 100         uint32_t val;
 101         HAL_STATUS ecode;
 102         HAL_BOOL rfStatus;
 103
 104         HALDEBUG(AH_NULL, HAL_DEBUG_ATTACH, "%s: sc %p st %p sh %p\n",
 105             __func__, sc, (void*) st, (void*) sh);
 106
 107         /* NB: memory is returned zero'd */
 108         ahp5416 = ath_hal_malloc(sizeof (struct ath_hal_5416));
 109         if (ahp5416 == AH_NULL) {
 110                 HALDEBUG(AH_NULL, HAL_DEBUG_ANY,
 111                     "%s: cannot allocate memory for state block\n", __func__);
 112                 *status = HAL_ENOMEM;
 113                 return AH_NULL;
 114         }
 115         ar5416InitState(ahp5416, devid, sc, st, sh, status);
 116         ahp = &ahp5416->ah_5212;
 117         ah = &ahp->ah_priv.h;
 118
 119         /* XXX override with 9160 specific state */
 120         /* override 5416 methods for our needs */
 121         ah->ah_detach                   = ar9160Detach;
 122
 123         AH5416(ah)->ah_cal.iqCalData.calData = &ar9160_iq_cal;
 124         AH5416(ah)->ah_cal.adcGainCalData.calData = &ar9160_adc_gain_cal;
 125         AH5416(ah)->ah_cal.adcDcCalData.calData = &ar9160_adc_dc_cal;
 126         AH5416(ah)->ah_cal.adcDcCalInitData.calData = &ar9160_adc_init_dc_cal;
 127         AH5416(ah)->ah_cal.suppCals = ADC_GAIN_CAL | ADC_DC_CAL | IQ_MISMATCH_CAL;
 128
 129         if (!ar5416SetResetReg(ah, HAL_RESET_POWER_ON)) {
 130                 /* reset chip */
 131                 HALDEBUG(ah, HAL_DEBUG_ANY, "%s: couldn't reset chip\n",
 132                     __func__);
 133                 ecode = HAL_EIO;
 134                 goto bad;
 135         }
 136
 137         if (!ar5416SetPowerMode(ah, HAL_PM_AWAKE, AH_TRUE)) {
 138                 HALDEBUG(ah, HAL_DEBUG_ANY, "%s: couldn't wakeup chip\n",
 139                     __func__);
 140                 ecode = HAL_EIO;
 141                 goto bad;
 142         }
 143         /* Read Revisions from Chips before taking out of reset */
 144         val = OS_REG_READ(ah, AR_SREV);
 145         HALDEBUG(ah, HAL_DEBUG_ATTACH,
 146             "%s: ID 0x%x VERSION 0x%x TYPE 0x%x REVISION 0x%x\n",
 147             __func__, MS(val, AR_XSREV_ID), MS(val, AR_XSREV_VERSION),
 148             MS(val, AR_XSREV_TYPE), MS(val, AR_XSREV_REVISION));
 149         /* NB: include chip type to differentiate from pre-Sowl versions */
 150         AH_PRIVATE(ah)->ah_macVersion =
 151             (val & AR_XSREV_VERSION) >> AR_XSREV_TYPE_S;
 152         AH_PRIVATE(ah)->ah_macRev = MS(val, AR_XSREV_REVISION);
 153         /* XXX extract pcie info */
 154
 155         /* setup common ini data; rf backends handle remainder */
 156         HAL_INI_INIT(&ahp->ah_ini_modes, ar9160Modes, 6);
 157         HAL_INI_INIT(&ahp->ah_ini_common, ar9160Common, 2);
 158
 159         HAL_INI_INIT(&AH5416(ah)->ah_ini_bb_rfgain, ar9160BB_RfGain, 3);
 160         HAL_INI_INIT(&AH5416(ah)->ah_ini_bank0, ar9160Bank0, 2);
 161         HAL_INI_INIT(&AH5416(ah)->ah_ini_bank1, ar9160Bank1, 2);
 162         HAL_INI_INIT(&AH5416(ah)->ah_ini_bank2, ar9160Bank2, 2);
 163         HAL_INI_INIT(&AH5416(ah)->ah_ini_bank3, ar9160Bank3, 3);
 164         HAL_INI_INIT(&AH5416(ah)->ah_ini_bank6, ar9160Bank6, 3);
 165         HAL_INI_INIT(&AH5416(ah)->ah_ini_bank7, ar9160Bank7, 2);
 166         if (AR_SREV_SOWL_11(ah))
 167                 HAL_INI_INIT(&AH5416(ah)->ah_ini_addac, ar9160Addac_1_1, 2);
 168         else
 169                 HAL_INI_INIT(&AH5416(ah)->ah_ini_addac, ar9160Addac, 2);
 170
 171         if (!ar5416ChipReset(ah, AH_NULL)) {    /* reset chip */
 172                 HALDEBUG(ah, HAL_DEBUG_ANY, "%s: chip reset failed\n", __func__);
 173                 ecode = HAL_EIO;
 174                 goto bad;
 175         }
 176
 177         AH_PRIVATE(ah)->ah_phyRev = OS_REG_READ(ah, AR_PHY_CHIP_ID);
 178
 179         if (!ar5212ChipTest(ah)) {
 180                 HALDEBUG(ah, HAL_DEBUG_ANY, "%s: hardware self-test failed\n",
 181                     __func__);
 182                 ecode = HAL_ESELFTEST;
 183                 goto bad;
 184         }
 185
 186         /*
 187          * Set correct Baseband to analog shift
 188          * setting to access analog chips.
 189          */
 190         OS_REG_WRITE(ah, AR_PHY(0), 0x00000007);
 191
 192         /* Read Radio Chip Rev Extract */
 193         AH_PRIVATE(ah)->ah_analog5GhzRev = ar5212GetRadioRev(ah);
 194         switch (AH_PRIVATE(ah)->ah_analog5GhzRev & AR_RADIO_SREV_MAJOR) {
 195         case AR_RAD2133_SREV_MAJOR:     /* Sowl: 2G/3x3 */
 196         case AR_RAD5133_SREV_MAJOR:     /* Sowl: 2+5G/3x3 */
 197                 break;
 198         default:
 199                 if (AH_PRIVATE(ah)->ah_analog5GhzRev == 0) {
 200                         AH_PRIVATE(ah)->ah_analog5GhzRev =
 201                                 AR_RAD5133_SREV_MAJOR;
 202                         break;
 203                 }
 204 #ifdef AH_DEBUG
 205                 HALDEBUG(ah, HAL_DEBUG_ANY,
 206                     "%s: 5G Radio Chip Rev 0x%02X is not supported by "
 207                     "this driver\n", __func__,
 208                     AH_PRIVATE(ah)->ah_analog5GhzRev);
 209                 ecode = HAL_ENOTSUPP;
 210                 goto bad;
 211 #endif
 212         }
 213         HALDEBUG(ah, HAL_DEBUG_ATTACH, "%s: Attaching AR2133 radio\n",
 214             __func__);
 215         rfStatus = ar2133RfAttach(ah, &ecode);
 216         if (!rfStatus) {
 217                 HALDEBUG(ah, HAL_DEBUG_ANY, "%s: RF setup failed, status %u\n",
 218                     __func__, ecode);
 219                 goto bad;
 220         }
 221
 222         ecode = ath_hal_v14EepromAttach(ah);
 223         if (ecode != HAL_OK)
 224                 goto bad;
 225
 226         /*
 227          * Got everything we need now to setup the capabilities.
 228          */
 229         if (!ar9160FillCapabilityInfo(ah)) {
 230                 ecode = HAL_EEREAD;
 231                 goto bad;
 232         }
 233
 234         ecode = ath_hal_eepromGet(ah, AR_EEP_MACADDR, ahp->ah_macaddr);
 235         if (ecode != HAL_OK) {
 236                 HALDEBUG(ah, HAL_DEBUG_ANY,
 237                     "%s: error getting mac address from EEPROM\n", __func__);
 238                 goto bad;
 239         }
 240         /* XXX How about the serial number ? */
 241         /* Read Reg Domain */
 242         AH_PRIVATE(ah)->ah_currentRD =
 243             ath_hal_eepromGet(ah, AR_EEP_REGDMN_0, AH_NULL);
 244
 245         /*
 246          * ah_miscMode is populated by ar5416FillCapabilityInfo()
 247          * starting from griffin. Set here to make sure that
 248          * AR_MISC_MODE_MIC_NEW_LOC_ENABLE is set before a GTK is
 249          * placed into hardware.
 250          */
 251         if (ahp->ah_miscMode != 0)
 252                 OS_REG_WRITE(ah, AR_MISC_MODE, ahp->ah_miscMode);
 253
 254         ar9160AniSetup(ah);                     /* Anti Noise Immunity */
 255         ar5416InitNfHistBuff(AH5416(ah)->ah_cal.nfCalHist);
 256
 257         HALDEBUG(ah, HAL_DEBUG_ATTACH, "%s: return\n", __func__);
 258
 259         return ah;
 260 bad:
 261         if (ahp)
 262                 ar9160Detach((struct ath_hal *) ahp);
 263         if (status)
 264                 *status = ecode;
 265         return AH_NULL;
 266 }
 267
 268 void
 269 ar9160Detach(struct ath_hal *ah)
 270 {
 271         HALDEBUG(ah, HAL_DEBUG_ATTACH, "%s:\n", __func__);
 272
 273         HALASSERT(ah != AH_NULL);
 274         HALASSERT(ah->ah_magic == AR5416_MAGIC);
 275
 276         ar5416Detach(ah);
 277 }
 278
 279 /*
 280  * Fill all software cached or static hardware state information.
 281  * Return failure if capabilities are to come from EEPROM and
 282  * cannot be read.
 283  */
 284 static HAL_BOOL
 285 ar9160FillCapabilityInfo(struct ath_hal *ah)
 286 {
 287         HAL_CAPABILITIES *pCap = &AH_PRIVATE(ah)->ah_caps;
 288
 289         if (!ar5416FillCapabilityInfo(ah))
 290                 return AH_FALSE;
 291         pCap->halCSTSupport = AH_TRUE;
 292         pCap->halRifsRxSupport = AH_TRUE;
 293         pCap->halRifsTxSupport = AH_TRUE;
 294         pCap->halRtsAggrLimit = 64*1024;        /* 802.11n max */
 295         pCap->halExtChanDfsSupport = AH_TRUE;
 296         pCap->halAutoSleepSupport = AH_FALSE;   /* XXX? */
 297         return AH_TRUE;
 298 }
 299
 300 static const char*
 301 ar9160Probe(uint16_t vendorid, uint16_t devid)
 302 {
 303         if (vendorid == ATHEROS_VENDOR_ID && devid == AR9160_DEVID_PCI)
 304                 return "Atheros 9160";
 305         return AH_NULL;
 306 }
 307 AH_CHIP(AR9160, ar9160Probe, ar9160Attach);