1 /* $NetBSD: in6_pcb.h,v 1.33 2009/04/20 18:14:30 elad Exp $ */
2 /* $KAME: in6_pcb.h,v 1.45 2001/02/09 05:59:46 itojun Exp $ */
5 * Copyright (C) 1995, 1996, 1997, and 1998 WIDE Project.
8 * Redistribution and use in source and binary forms, with or without
9 * modification, are permitted provided that the following conditions
11 * 1. Redistributions of source code must retain the above copyright
12 * notice, this list of conditions and the following disclaimer.
13 * 2. Redistributions in binary form must reproduce the above copyright
14 * notice, this list of conditions and the following disclaimer in the
15 * documentation and/or other materials provided with the distribution.
16 * 3. Neither the name of the project nor the names of its contributors
17 * may be used to endorse or promote products derived from this software
18 * without specific prior written permission.
20 * THIS SOFTWARE IS PROVIDED BY THE PROJECT AND CONTRIBUTORS ``AS IS'' AND
21 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
22 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
23 * ARE DISCLAIMED. IN NO EVENT SHALL THE PROJECT OR CONTRIBUTORS BE LIABLE
24 * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
25 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
26 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
27 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
28 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
29 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
34 * Copyright (c) 1982, 1986, 1990, 1993
35 * The Regents of the University of California. All rights reserved.
37 * Redistribution and use in source and binary forms, with or without
38 * modification, are permitted provided that the following conditions
40 * 1. Redistributions of source code must retain the above copyright
41 * notice, this list of conditions and the following disclaimer.
42 * 2. Redistributions in binary form must reproduce the above copyright
43 * notice, this list of conditions and the following disclaimer in the
44 * documentation and/or other materials provided with the distribution.
45 * 3. Neither the name of the University nor the names of its contributors
46 * may be used to endorse or promote products derived from this software
47 * without specific prior written permission.
49 * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
50 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
51 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
52 * ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
53 * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
54 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
55 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
56 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
57 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
58 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
61 * @(#)in_pcb.h 8.1 (Berkeley) 6/10/93
64 #ifndef _NETINET6_IN6_PCB_H_
65 #define _NETINET6_IN6_PCB_H_
67 #include <sys/queue.h>
68 #include <netinet/in_pcb_hdr.h>
71 * Common structure pcb for internet protocol implementation.
72 * Here are stored pointers to local and foreign host table
73 * entries, local and foreign socket numbers, and pointers
74 * up (to a socket structure) and down (to a protocol-specific)
80 struct inpcb_hdr in6p_head
;
81 #define in6p_hash in6p_head.inph_hash
82 #define in6p_queue in6p_head.inph_queue
83 #define in6p_af in6p_head.inph_af
84 #define in6p_ppcb in6p_head.inph_ppcb
85 #define in6p_state in6p_head.inph_state
86 #define in6p_socket in6p_head.inph_socket
87 #define in6p_table in6p_head.inph_table
88 #define in6p_sp in6p_head.inph_sp
89 struct route in6p_route
; /* placeholder for routing entry */
90 u_int16_t in6p_fport
; /* foreign port */
91 u_int16_t in6p_lport
; /* local port */
92 u_int32_t in6p_flowinfo
; /* priority and flowlabel */
93 int in6p_flags
; /* generic IP6/datagram flags */
94 int in6p_hops
; /* default hop limit */
95 struct ip6_hdr in6p_ip6
; /* header prototype */
96 struct mbuf
*in6p_options
; /* IP6 options */
97 struct ip6_pktopts
*in6p_outputopts
; /* IP6 options for outgoing packets */
98 struct ip6_moptions
*in6p_moptions
; /* IP6 multicast options */
99 struct icmp6_filter
*in6p_icmp6filt
;
100 int in6p_cksum
; /* IPV6_CHECKSUM setsockopt */
103 #define in6p_faddr in6p_ip6.ip6_dst
104 #define in6p_laddr in6p_ip6.ip6_src
106 /* states in inp_state: */
107 #define IN6P_ATTACHED INP_ATTACHED
108 #define IN6P_BOUND INP_BOUND
109 #define IN6P_CONNECTED INP_CONNECTED
112 * Flags in in6p_flags
113 * We define KAME's original flags in higher 16 bits as much as possible
114 * for compatibility with *bsd*s.
116 #define IN6P_RECVOPTS 0x001000 /* receive incoming IP6 options */
117 #define IN6P_RECVRETOPTS 0x002000 /* receive IP6 options for reply */
118 #define IN6P_RECVDSTADDR 0x004000 /* receive IP6 dst address */
119 #define IN6P_IPV6_V6ONLY 0x008000 /* restrict AF_INET6 socket for v6 */
120 #define IN6P_PKTINFO 0x010000 /* receive IP6 dst and I/F */
121 #define IN6P_HOPLIMIT 0x020000 /* receive hoplimit */
122 #define IN6P_HOPOPTS 0x040000 /* receive hop-by-hop options */
123 #define IN6P_DSTOPTS 0x080000 /* receive dst options after rthdr */
124 #define IN6P_RTHDR 0x100000 /* receive routing header */
125 #define IN6P_RTHDRDSTOPTS 0x200000 /* receive dstoptions before rthdr */
126 #define IN6P_TCLASS 0x400000 /* traffic class */
128 #define IN6P_HIGHPORT 0x1000000 /* user wants "high" port binding */
129 #define IN6P_LOWPORT 0x2000000 /* user wants "low" port binding */
130 #define IN6P_ANONPORT 0x4000000 /* port chosen for user */
131 #define IN6P_FAITH 0x8000000 /* accept FAITH'ed connections */
133 #define IN6P_RFC2292 0x40000000 /* RFC2292 */
134 #define IN6P_MTU 0x80000000 /* use minimum MTU */
136 #define IN6P_CONTROLOPTS (IN6P_PKTINFO|IN6P_HOPLIMIT|IN6P_HOPOPTS|\
137 IN6P_DSTOPTS|IN6P_RTHDR|IN6P_RTHDRDSTOPTS|\
138 IN6P_TCLASS|IN6P_RFC2292|\
141 /* compute hash value for foreign and local in6_addr and port */
142 #define IN6_HASH(faddr, fport, laddr, lport) \
143 (((faddr)->s6_addr32[0] ^ (faddr)->s6_addr32[1] ^ \
144 (faddr)->s6_addr32[2] ^ (faddr)->s6_addr32[3] ^ \
145 (laddr)->s6_addr32[0] ^ (laddr)->s6_addr32[1] ^ \
146 (laddr)->s6_addr32[2] ^ (laddr)->s6_addr32[3]) \
149 #define sotoin6pcb(so) ((struct in6pcb *)(so)->so_pcb)
152 void in6_losing(struct in6pcb
*);
153 void in6_pcbinit(struct inpcbtable
*, int, int);
154 int in6_pcballoc(struct socket
*, void *);
155 int in6_pcbbind(void *, struct mbuf
*, struct lwp
*);
156 int in6_pcbconnect(void *, struct mbuf
*, struct lwp
*);
157 void in6_pcbdetach(struct in6pcb
*);
158 void in6_pcbdisconnect(struct in6pcb
*);
159 struct in6pcb
*in6_pcblookup_port(struct inpcbtable
*, struct in6_addr
*,
161 int in6_pcbnotify(struct inpcbtable
*, const struct sockaddr
*,
162 u_int
, const struct sockaddr
*, u_int
, int, void *,
163 void (*)(struct in6pcb
*, int));
164 void in6_pcbpurgeif0(struct inpcbtable
*, struct ifnet
*);
165 void in6_pcbpurgeif(struct inpcbtable
*, struct ifnet
*);
166 void in6_pcbstate(struct in6pcb
*, int);
167 void in6_rtchange(struct in6pcb
*, int);
168 void in6_setpeeraddr(struct in6pcb
*, struct mbuf
*);
169 void in6_setsockaddr(struct in6pcb
*, struct mbuf
*);
172 int in6_selecthlim(struct in6pcb
*, struct ifnet
*);
173 int in6_pcbsetport(struct sockaddr_in6
*, struct in6pcb
*, struct lwp
*);
175 extern struct rtentry
*
176 in6_pcbrtentry(struct in6pcb
*);
177 extern struct in6pcb
*in6_pcblookup_connect(struct inpcbtable
*,
178 const struct in6_addr
*, u_int
, const struct in6_addr
*, u_int
, int);
179 extern struct in6pcb
*in6_pcblookup_bind(struct inpcbtable
*,
180 const struct in6_addr
*, u_int
, int);
183 #endif /* !_NETINET6_IN6_PCB_H_ */