include/opcode/mmix.h

   1 /* mmix.h -- Header file for MMIX opcode table
   2    Copyright (C) 2001, 2003, 2010 Free Software Foundation, Inc.
   3    Written by Hans-Peter Nilsson (hp@bitrange.com)
   4
   5    This file is part of GDB, GAS, and the GNU binutils.
   6
   7    GDB, GAS, and the GNU binutils are free software; you can redistribute
   8    them and/or modify them under the terms of the GNU General Public
   9    License as published by the Free Software Foundation; either version 3,
  10    or (at your option) any later version.
  11
  12    GDB, GAS, and the GNU binutils are distributed in the hope that they
  13    will be useful, but WITHOUT ANY WARRANTY; without even the implied
  14    warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See
  15    the GNU General Public License for more details.
  16
  17    You should have received a copy of the GNU General Public License
  18    along with this file; see the file COPYING3.  If not, write to the Free
  19    Software Foundation, 51 Franklin Street - Fifth Floor, Boston,
  20    MA 02110-1301, USA.  */
  21
  22 /* We could have just a char*[] table indexed by the register number, but
  23    that would not allow for synonyms.  The table is terminated with an
  24    entry with a NULL name.  */
  25 struct mmix_spec_reg
  26 {
  27   const char *name;
  28   unsigned int number;
  29 };
  30
  31 /* General indication of the type of instruction.  */
  32 enum mmix_insn_type
  33  {
  34    mmix_type_pseudo,
  35    mmix_type_normal,
  36    mmix_type_branch,
  37    mmix_type_condbranch,
  38    mmix_type_memaccess_octa,
  39    mmix_type_memaccess_tetra,
  40    mmix_type_memaccess_wyde,
  41    mmix_type_memaccess_byte,
  42    mmix_type_memaccess_block,
  43    mmix_type_jsr
  44  };
  45
  46 /* Type of operands an instruction takes.  Use when parsing assembly code
  47    and disassembling.  */
  48 enum mmix_operands_type
  49  {
  50    mmix_operands_none = 0,
  51
  52    /* All operands are registers: "$X,$Y,$Z".  */
  53    mmix_operands_regs,
  54
  55    /* "$X,YZ", like SETH.  */
  56    mmix_operands_reg_yz,
  57
  58    /* The regular "$X,$Y,$Z|Z".
  59       The Z is optional; if only "$X,$Y" is given, then "$X,$Y,0" is
  60       assumed.  */
  61    mmix_operands_regs_z_opt,
  62
  63    /* The regular "$X,$Y,$Z|Z".  */
  64    mmix_operands_regs_z,
  65
  66    /* "Address"; only JMP.  Zero operands allowed unless GNU syntax.  */
  67    mmix_operands_jmp,
  68
  69    /* "$X|X,$Y,$Z|Z": PUSHGO; like "3", but X can be expressed as an
  70       integer.  */
  71    mmix_operands_pushgo,
  72
  73    /* Two registers or a register and a byte, like FLOT, possibly with
  74       rounding: "$X,$Z|Z" or "$X,ROUND_MODE,$Z|Z".  */
  75    mmix_operands_roundregs_z,
  76
  77    /* "X,YZ", POP.  Unless GNU syntax, zero or one operand is allowed.  */
  78    mmix_operands_pop,
  79
  80    /* Two registers, possibly with rounding: "$X,$Z" or
  81       "$X,ROUND_MODE,$Z".  */
  82    mmix_operands_roundregs,
  83
  84    /* "XYZ", like SYNC.  */
  85    mmix_operands_sync,
  86
  87    /* "X,$Y,$Z|Z", like SYNCD.  */
  88    mmix_operands_x_regs_z,
  89
  90    /* "$X,Y,$Z|Z", like NEG and NEGU.  The Y field is optional, default 0.  */
  91    mmix_operands_neg,
  92
  93    /* "$X,Address, like GETA or branches.  */
  94    mmix_operands_regaddr,
  95
  96    /* "$X|X,Address, like PUSHJ.  */
  97    mmix_operands_pushj,
  98
  99    /* "$X,spec_reg"; GET.  */
 100    mmix_operands_get,
 101
 102    /* "spec_reg,$Z|Z"; PUT.  */
 103    mmix_operands_put,
 104
 105    /* Two registers, "$X,$Y".  */
 106    mmix_operands_set,
 107
 108    /* "$X,0"; SAVE.  */
 109    mmix_operands_save,
 110
 111    /* "0,$Z"; UNSAVE. */
 112    mmix_operands_unsave,
 113
 114    /* "X,Y,Z"; like SWYM or TRAP.  Zero (or 1 if GNU syntax) to three
 115       operands, interpreted as 0; XYZ; X, YZ and X, Y, Z.  */
 116    mmix_operands_xyz_opt,
 117
 118    /* Just "Z", like RESUME.  Unless GNU syntax, the operand can be omitted
 119       and will then be assumed zero.  */
 120    mmix_operands_resume,
 121
 122    /* These are specials to handle that pseudo-directives are specified
 123       like ordinary insns when being mmixal-compatible.  They signify the
 124       specific pseudo-directive rather than the operands type.  */
 125
 126    /* LOC.  */
 127    mmix_operands_loc,
 128
 129    /* PREFIX.  */
 130    mmix_operands_prefix,
 131
 132    /* BYTE.  */
 133    mmix_operands_byte,
 134
 135    /* WYDE.  */
 136    mmix_operands_wyde,
 137
 138    /* TETRA.  */
 139    mmix_operands_tetra,
 140
 141    /* OCTA.  */
 142    mmix_operands_octa,
 143
 144    /* LOCAL.  */
 145    mmix_operands_local,
 146
 147    /* BSPEC.  */
 148    mmix_operands_bspec,
 149
 150    /* ESPEC.  */
 151    mmix_operands_espec,
 152  };
 153
 154 struct mmix_opcode
 155  {
 156    const char *name;
 157    unsigned long match;
 158    unsigned long lose;
 159    enum mmix_operands_type operands;
 160
 161    /* This is used by the disassembly function.  */
 162    enum mmix_insn_type type;
 163  };
 164
 165 /* Declare the actual tables.  */
 166 extern const struct mmix_opcode mmix_opcodes[];
 167
 168 /* This one is terminated with an entry with a NULL name.  */
 169 extern const struct mmix_spec_reg mmix_spec_regs[];
 170
 171 /* Some insn values we use when padding and synthesizing address loads.  */
 172 #define IMM_OFFSET_BIT 1
 173 #define COND_INV_BIT 0x8
 174 #define PRED_INV_BIT 0x10
 175
 176 #define PUSHGO_INSN_BYTE 0xbe
 177 #define GO_INSN_BYTE 0x9e
 178 #define SETL_INSN_BYTE 0xe3
 179 #define INCML_INSN_BYTE 0xe6
 180 #define INCMH_INSN_BYTE 0xe5
 181 #define INCH_INSN_BYTE 0xe4
 182 #define SWYM_INSN_BYTE 0xfd
 183 #define JMP_INSN_BYTE 0xf0
 184
 185 /* We can have 256 - 32 (local registers) - 1 ($255 is not allocatable)
 186    global registers.  */
 187 #define MAX_GREGS 223