2 * The authors hereby grant permission to use, copy, modify, distribute,
3 * and license this software and its documentation for any purpose, provided
4 * that existing copyright notices are retained in all copies and that this
5 * notice is included verbatim in any distributions. No written agreement,
6 * license, or royalty fee is required for any of the authorized uses.
7 * Modifications to this software may be copyrighted by their authors
8 * and need not follow the licensing terms described here, provided that
9 * the new terms are clearly indicated on the first page of each file where
16 ** Copyright (C) 2007-2009 Analog Devices Inc., All Rights Reserved.
18 ************************************************************************************
20 ** This include file contains a list of macro "defines" to enable the programmer
21 ** to use symbolic names for the registers common to the ADSP-BF51x peripherals.
23 ************************************************************************************
24 ** System MMR Register Map
25 ************************************************************************************/
32 #pragma diag(suppress:misra_rule_19_4)
33 #pragma diag(suppress:misra_rule_19_7)
35 #endif /* _MISRA_RULES */
38 /* ************************************************************************************************************** */
39 /* SYSTEM & MMR ADDRESS DEFINITIONS COMMON TO ALL ADSP-BF51x */
40 /* ************************************************************************************************************** */
42 /* Clock and System Control (0xFFC00000 - 0xFFC000FF) */
43 #define PLL_CTL 0xFFC00000 /* PLL Control Register */
44 #define PLL_DIV 0xFFC00004 /* PLL Divide Register */
45 #define VR_CTL 0xFFC00008 /* Voltage Regulator Control Register */
46 #define PLL_STAT 0xFFC0000C /* PLL Status Register */
47 #define PLL_LOCKCNT 0xFFC00010 /* PLL Lock Count Register */
48 #define CHIPID 0xFFC00014 /* Device ID Register */
51 /* System Interrupt Controller (0xFFC00100 - 0xFFC001FF) */
52 #define SWRST 0xFFC00100 /* Software Reset Register */
53 #define SYSCR 0xFFC00104 /* System Configuration Register */
55 #define SIC_IMASK0 0xFFC0010C /* Interrupt Mask Register */
56 /* legacy register name (below) provided for backwards code compatibility */
57 #define SIC_IMASK SIC_IMASK0
58 #define SIC_IAR0 0xFFC00110 /* Interrupt Assignment Register 0 */
59 #define SIC_IAR1 0xFFC00114 /* Interrupt Assignment Register 1 */
60 #define SIC_IAR2 0xFFC00118 /* Interrupt Assignment Register 2 */
61 #define SIC_IAR3 0xFFC0011C /* Interrupt Assignment Register 3 */
62 #define SIC_ISR0 0xFFC00120 /* Interrupt Status Register */
63 /* legacy register name (below) provided for backwards code compatibility */
64 #define SIC_ISR SIC_ISR0
65 #define SIC_IWR0 0xFFC00124 /* Interrupt Wakeup Register */
66 /* legacy register name (below) provided for backwards code compatibility */
67 #define SIC_IWR SIC_IWR0
69 /* SIC Additions to ADSP-BF51x (0xFFC0014C - 0xFFC00162) */
70 #define SIC_IMASK1 0xFFC0014C /* Interrupt Mask register of SIC2 */
71 #define SIC_IAR4 0xFFC00150 /* Interrupt Assignment register4 */
72 #define SIC_IAR5 0xFFC00154 /* Interrupt Assignment register5 */
73 #define SIC_IAR6 0xFFC00158 /* Interrupt Assignment register6 */
74 #define SIC_IAR7 0xFFC0015C /* Interrupt Assignment register7 */
75 #define SIC_ISR1 0xFFC00160 /* Interrupt Statur register */
76 #define SIC_IWR1 0xFFC00164 /* Interrupt Wakeup register */
79 /* Watchdog Timer (0xFFC00200 - 0xFFC002FF) */
80 #define WDOG_CTL 0xFFC00200 /* Watchdog Control Register */
81 #define WDOG_CNT 0xFFC00204 /* Watchdog Count Register */
82 #define WDOG_STAT 0xFFC00208 /* Watchdog Status Register */
85 /* Real Time Clock (0xFFC00300 - 0xFFC003FF) */
86 #define RTC_STAT 0xFFC00300 /* RTC Status Register */
87 #define RTC_ICTL 0xFFC00304 /* RTC Interrupt Control Register */
88 #define RTC_ISTAT 0xFFC00308 /* RTC Interrupt Status Register */
89 #define RTC_SWCNT 0xFFC0030C /* RTC Stopwatch Count Register */
90 #define RTC_ALARM 0xFFC00310 /* RTC Alarm Time Register */
91 #define RTC_FAST 0xFFC00314 /* RTC Prescaler Enable Register */
92 #define RTC_PREN 0xFFC00314 /* RTC Prescaler Enable Alternate Macro */
95 /* UART0 Controller (0xFFC00400 - 0xFFC004FF) */
96 #define UART0_THR 0xFFC00400 /* Transmit Holding register */
97 #define UART0_RBR 0xFFC00400 /* Receive Buffer register */
98 #define UART0_DLL 0xFFC00400 /* Divisor Latch (Low-Byte) */
99 #define UART0_IER 0xFFC00404 /* Interrupt Enable Register */
100 #define UART0_DLH 0xFFC00404 /* Divisor Latch (High-Byte) */
101 #define UART0_IIR 0xFFC00408 /* Interrupt Identification Register */
102 #define UART0_LCR 0xFFC0040C /* Line Control Register */
103 #define UART0_MCR 0xFFC00410 /* Modem Control Register */
104 #define UART0_LSR 0xFFC00414 /* Line Status Register */
105 #define UART0_SCR 0xFFC0041C /* SCR Scratch Register */
106 #define UART0_GCTL 0xFFC00424 /* Global Control Register */
109 /* SPI Controller (0xFFC00500 - 0xFFC005FF) */
110 #define SPI0_CTL 0xFFC00500 /* SPI Control Register */
111 /* legacy register name (below) provided for backwards code compatibility */
112 #define SPI_CTL SPI0_CTL
113 #define SPI0_FLG 0xFFC00504 /* SPI Flag register */
114 /* legacy register name (below) provided for backwards code compatibility */
115 #define SPI_FLG SPI0_FLG
116 #define SPI0_STAT 0xFFC00508 /* SPI Status register */
117 /* legacy register name (below) provided for backwards code compatibility */
118 #define SPI_STAT SPI0_STAT
119 #define SPI0_TDBR 0xFFC0050C /* SPI Transmit Data Buffer Register */
120 /* legacy register name (below) provided for backwards code compatibility */
121 #define SPI_TDBR SPI0_TDBR
122 #define SPI0_RDBR 0xFFC00510 /* SPI Receive Data Buffer Register */
123 /* legacy register name (below) provided for backwards code compatibility */
124 #define SPI_RDBR SPI0_RDBR
125 #define SPI0_BAUD 0xFFC00514 /* SPI Baud rate Register */
126 /* legacy register name (below) provided for backwards code compatibility */
127 #define SPI_BAUD SPI0_BAUD
128 #define SPI0_SHADOW 0xFFC00518 /* SPI_RDBR Shadow Register */
129 /* legacy register name (below) provided for backwards code compatibility */
130 #define SPI_SHADOW SPI0_SHADOW
133 /* TIMER0-7 Registers (0xFFC00600 - 0xFFC006FF) */
134 #define TIMER0_CONFIG 0xFFC00600 /* Timer 0 Configuration Register */
135 #define TIMER0_COUNTER 0xFFC00604 /* Timer 0 Counter Register */
136 #define TIMER0_PERIOD 0xFFC00608 /* Timer 0 Period Register */
137 #define TIMER0_WIDTH 0xFFC0060C /* Timer 0 Width Register */
139 #define TIMER1_CONFIG 0xFFC00610 /* Timer 1 Configuration Register */
140 #define TIMER1_COUNTER 0xFFC00614 /* Timer 1 Counter Register */
141 #define TIMER1_PERIOD 0xFFC00618 /* Timer 1 Period Register */
142 #define TIMER1_WIDTH 0xFFC0061C /* Timer 1 Width Register */
144 #define TIMER2_CONFIG 0xFFC00620 /* Timer 2 Configuration Register */
145 #define TIMER2_COUNTER 0xFFC00624 /* Timer 2 Counter Register */
146 #define TIMER2_PERIOD 0xFFC00628 /* Timer 2 Period Register */
147 #define TIMER2_WIDTH 0xFFC0062C /* Timer 2 Width Register */
149 #define TIMER3_CONFIG 0xFFC00630 /* Timer 3 Configuration Register */
150 #define TIMER3_COUNTER 0xFFC00634 /* Timer 3 Counter Register */
151 #define TIMER3_PERIOD 0xFFC00638 /* Timer 3 Period Register */
152 #define TIMER3_WIDTH 0xFFC0063C /* Timer 3 Width Register */
154 #define TIMER4_CONFIG 0xFFC00640 /* Timer 4 Configuration Register */
155 #define TIMER4_COUNTER 0xFFC00644 /* Timer 4 Counter Register */
156 #define TIMER4_PERIOD 0xFFC00648 /* Timer 4 Period Register */
157 #define TIMER4_WIDTH 0xFFC0064C /* Timer 4 Width Register */
159 #define TIMER5_CONFIG 0xFFC00650 /* Timer 5 Configuration Register */
160 #define TIMER5_COUNTER 0xFFC00654 /* Timer 5 Counter Register */
161 #define TIMER5_PERIOD 0xFFC00658 /* Timer 5 Period Register */
162 #define TIMER5_WIDTH 0xFFC0065C /* Timer 5 Width Register */
164 #define TIMER6_CONFIG 0xFFC00660 /* Timer 6 Configuration Register */
165 #define TIMER6_COUNTER 0xFFC00664 /* Timer 6 Counter Register */
166 #define TIMER6_PERIOD 0xFFC00668 /* Timer 6 Period Register */
167 #define TIMER6_WIDTH 0xFFC0066C /* Timer 6 Width Register */
169 #define TIMER7_CONFIG 0xFFC00670 /* Timer 7 Configuration Register */
170 #define TIMER7_COUNTER 0xFFC00674 /* Timer 7 Counter Register */
171 #define TIMER7_PERIOD 0xFFC00678 /* Timer 7 Period Register */
172 #define TIMER7_WIDTH 0xFFC0067C /* Timer 7 Width Register */
174 #define TIMER_ENABLE 0xFFC00680 /* Timer Enable Register */
175 #define TIMER_DISABLE 0xFFC00684 /* Timer Disable Register */
176 #define TIMER_STATUS 0xFFC00688 /* Timer Status Register */
179 /* General Purpose I/O Port F (0xFFC00700 - 0xFFC007FF) */
180 #define PORTFIO 0xFFC00700 /* Port F I/O Pin State Specify Register */
181 #define PORTFIO_CLEAR 0xFFC00704 /* Port F I/O Peripheral Interrupt Clear Register */
182 #define PORTFIO_SET 0xFFC00708 /* Port F I/O Peripheral Interrupt Set Register */
183 #define PORTFIO_TOGGLE 0xFFC0070C /* Port F I/O Pin State Toggle Register */
184 #define PORTFIO_MASKA 0xFFC00710 /* Port F I/O Mask State Specify Interrupt A Register */
185 #define PORTFIO_MASKA_CLEAR 0xFFC00714 /* Port F I/O Mask Disable Interrupt A Register */
186 #define PORTFIO_MASKA_SET 0xFFC00718 /* Port F I/O Mask Enable Interrupt A Register */
187 #define PORTFIO_MASKA_TOGGLE 0xFFC0071C /* Port F I/O Mask Toggle Enable Interrupt A Register */
188 #define PORTFIO_MASKB 0xFFC00720 /* Port F I/O Mask State Specify Interrupt B Register */
189 #define PORTFIO_MASKB_CLEAR 0xFFC00724 /* Port F I/O Mask Disable Interrupt B Register */
190 #define PORTFIO_MASKB_SET 0xFFC00728 /* Port F I/O Mask Enable Interrupt B Register */
191 #define PORTFIO_MASKB_TOGGLE 0xFFC0072C /* Port F I/O Mask Toggle Enable Interrupt B Register */
192 #define PORTFIO_DIR 0xFFC00730 /* Port F I/O Direction Register */
193 #define PORTFIO_POLAR 0xFFC00734 /* Port F I/O Source Polarity Register */
194 #define PORTFIO_EDGE 0xFFC00738 /* Port F I/O Source Sensitivity Register */
195 #define PORTFIO_BOTH 0xFFC0073C /* Port F I/O Set on BOTH Edges Register */
196 #define PORTFIO_INEN 0xFFC00740 /* Port F I/O Input Enable Register */
199 /* SPORT0 Controller (0xFFC00800 - 0xFFC008FF) */
200 #define SPORT0_TCR1 0xFFC00800 /* SPORT0 Transmit Configuration 1 Register */
201 #define SPORT0_TCR2 0xFFC00804 /* SPORT0 Transmit Configuration 2 Register */
202 #define SPORT0_TCLKDIV 0xFFC00808 /* SPORT0 Transmit Clock Divider */
203 #define SPORT0_TFSDIV 0xFFC0080C /* SPORT0 Transmit Frame Sync Divider */
204 #define SPORT0_TX 0xFFC00810 /* SPORT0 TX Data Register */
205 #define SPORT0_RX 0xFFC00818 /* SPORT0 RX Data Register */
206 #define SPORT0_RCR1 0xFFC00820 /* SPORT0 Transmit Configuration 1 Register */
207 #define SPORT0_RCR2 0xFFC00824 /* SPORT0 Transmit Configuration 2 Register */
208 #define SPORT0_RCLKDIV 0xFFC00828 /* SPORT0 Receive Clock Divider */
209 #define SPORT0_RFSDIV 0xFFC0082C /* SPORT0 Receive Frame Sync Divider */
210 #define SPORT0_STAT 0xFFC00830 /* SPORT0 Status Register */
211 #define SPORT0_CHNL 0xFFC00834 /* SPORT0 Current Channel Register */
212 #define SPORT0_MCMC1 0xFFC00838 /* SPORT0 Multi-Channel Configuration Register 1 */
213 #define SPORT0_MCMC2 0xFFC0083C /* SPORT0 Multi-Channel Configuration Register 2 */
214 #define SPORT0_MTCS0 0xFFC00840 /* SPORT0 Multi-Channel Transmit Select Register 0 */
215 #define SPORT0_MTCS1 0xFFC00844 /* SPORT0 Multi-Channel Transmit Select Register 1 */
216 #define SPORT0_MTCS2 0xFFC00848 /* SPORT0 Multi-Channel Transmit Select Register 2 */
217 #define SPORT0_MTCS3 0xFFC0084C /* SPORT0 Multi-Channel Transmit Select Register 3 */
218 #define SPORT0_MRCS0 0xFFC00850 /* SPORT0 Multi-Channel Receive Select Register 0 */
219 #define SPORT0_MRCS1 0xFFC00854 /* SPORT0 Multi-Channel Receive Select Register 1 */
220 #define SPORT0_MRCS2 0xFFC00858 /* SPORT0 Multi-Channel Receive Select Register 2 */
221 #define SPORT0_MRCS3 0xFFC0085C /* SPORT0 Multi-Channel Receive Select Register 3 */
224 /* SPORT1 Controller (0xFFC00900 - 0xFFC009FF) */
225 #define SPORT1_TCR1 0xFFC00900 /* SPORT1 Transmit Configuration 1 Register */
226 #define SPORT1_TCR2 0xFFC00904 /* SPORT1 Transmit Configuration 2 Register */
227 #define SPORT1_TCLKDIV 0xFFC00908 /* SPORT1 Transmit Clock Divider */
228 #define SPORT1_TFSDIV 0xFFC0090C /* SPORT1 Transmit Frame Sync Divider */
229 #define SPORT1_TX 0xFFC00910 /* SPORT1 TX Data Register */
230 #define SPORT1_RX 0xFFC00918 /* SPORT1 RX Data Register */
231 #define SPORT1_RCR1 0xFFC00920 /* SPORT1 Transmit Configuration 1 Register */
232 #define SPORT1_RCR2 0xFFC00924 /* SPORT1 Transmit Configuration 2 Register */
233 #define SPORT1_RCLKDIV 0xFFC00928 /* SPORT1 Receive Clock Divider */
234 #define SPORT1_RFSDIV 0xFFC0092C /* SPORT1 Receive Frame Sync Divider */
235 #define SPORT1_STAT 0xFFC00930 /* SPORT1 Status Register */
236 #define SPORT1_CHNL 0xFFC00934 /* SPORT1 Current Channel Register */
237 #define SPORT1_MCMC1 0xFFC00938 /* SPORT1 Multi-Channel Configuration Register 1 */
238 #define SPORT1_MCMC2 0xFFC0093C /* SPORT1 Multi-Channel Configuration Register 2 */
239 #define SPORT1_MTCS0 0xFFC00940 /* SPORT1 Multi-Channel Transmit Select Register 0 */
240 #define SPORT1_MTCS1 0xFFC00944 /* SPORT1 Multi-Channel Transmit Select Register 1 */
241 #define SPORT1_MTCS2 0xFFC00948 /* SPORT1 Multi-Channel Transmit Select Register 2 */
242 #define SPORT1_MTCS3 0xFFC0094C /* SPORT1 Multi-Channel Transmit Select Register 3 */
243 #define SPORT1_MRCS0 0xFFC00950 /* SPORT1 Multi-Channel Receive Select Register 0 */
244 #define SPORT1_MRCS1 0xFFC00954 /* SPORT1 Multi-Channel Receive Select Register 1 */
245 #define SPORT1_MRCS2 0xFFC00958 /* SPORT1 Multi-Channel Receive Select Register 2 */
246 #define SPORT1_MRCS3 0xFFC0095C /* SPORT1 Multi-Channel Receive Select Register 3 */
249 /* External Bus Interface Unit (0xFFC00A00 - 0xFFC00AFF) */
250 #define EBIU_AMGCTL 0xFFC00A00 /* Asynchronous Memory Global Control Register */
251 #define EBIU_AMBCTL0 0xFFC00A04 /* Asynchronous Memory Bank Control Register 0 */
252 #define EBIU_AMBCTL1 0xFFC00A08 /* Asynchronous Memory Bank Control Register 1 */
253 #define EBIU_SDGCTL 0xFFC00A10 /* SDRAM Global Control Register */
254 #define EBIU_SDBCTL 0xFFC00A14 /* SDRAM Bank Control Register */
255 #define EBIU_SDRRC 0xFFC00A18 /* SDRAM Refresh Rate Control Register */
256 #define EBIU_SDSTAT 0xFFC00A1C /* SDRAM Status Register */
259 /* DMA Traffic Control Registers (0xFFC00B00 - 0xFFC00BFF) */
260 #define DMA_TC_PER 0xFFC00B0C /* Traffic Control Periods Register */
261 #define DMA_TC_CNT 0xFFC00B10 /* Traffic Control Current Counts Register */
263 /* Alternate deprecated register names (below) provided for backwards code compatibility */
264 #define DMA_TCPER 0xFFC00B0C /* Traffic Control Periods Register */
265 #define DMA_TCCNT 0xFFC00B10 /* Traffic Control Current Counts Register */
267 /* DMA Controller (0xFFC00C00 - 0xFFC00FFF) */
268 #define DMA0_NEXT_DESC_PTR 0xFFC00C00 /* DMA Channel 0 Next Descriptor Pointer Register */
269 #define DMA0_START_ADDR 0xFFC00C04 /* DMA Channel 0 Start Address Register */
270 #define DMA0_CONFIG 0xFFC00C08 /* DMA Channel 0 Configuration Register */
271 #define DMA0_X_COUNT 0xFFC00C10 /* DMA Channel 0 X Count Register */
272 #define DMA0_X_MODIFY 0xFFC00C14 /* DMA Channel 0 X Modify Register */
273 #define DMA0_Y_COUNT 0xFFC00C18 /* DMA Channel 0 Y Count Register */
274 #define DMA0_Y_MODIFY 0xFFC00C1C /* DMA Channel 0 Y Modify Register */
275 #define DMA0_CURR_DESC_PTR 0xFFC00C20 /* DMA Channel 0 Current Descriptor Pointer Register */
276 #define DMA0_CURR_ADDR 0xFFC00C24 /* DMA Channel 0 Current Address Register */
277 #define DMA0_IRQ_STATUS 0xFFC00C28 /* DMA Channel 0 Interrupt/Status Register */
278 #define DMA0_PERIPHERAL_MAP 0xFFC00C2C /* DMA Channel 0 Peripheral Map Register */
279 #define DMA0_CURR_X_COUNT 0xFFC00C30 /* DMA Channel 0 Current X Count Register */
280 #define DMA0_CURR_Y_COUNT 0xFFC00C38 /* DMA Channel 0 Current Y Count Register */
282 #define DMA1_NEXT_DESC_PTR 0xFFC00C40 /* DMA Channel 1 Next Descriptor Pointer Register */
283 #define DMA1_START_ADDR 0xFFC00C44 /* DMA Channel 1 Start Address Register */
284 #define DMA1_CONFIG 0xFFC00C48 /* DMA Channel 1 Configuration Register */
285 #define DMA1_X_COUNT 0xFFC00C50 /* DMA Channel 1 X Count Register */
286 #define DMA1_X_MODIFY 0xFFC00C54 /* DMA Channel 1 X Modify Register */
287 #define DMA1_Y_COUNT 0xFFC00C58 /* DMA Channel 1 Y Count Register */
288 #define DMA1_Y_MODIFY 0xFFC00C5C /* DMA Channel 1 Y Modify Register */
289 #define DMA1_CURR_DESC_PTR 0xFFC00C60 /* DMA Channel 1 Current Descriptor Pointer Register */
290 #define DMA1_CURR_ADDR 0xFFC00C64 /* DMA Channel 1 Current Address Register */
291 #define DMA1_IRQ_STATUS 0xFFC00C68 /* DMA Channel 1 Interrupt/Status Register */
292 #define DMA1_PERIPHERAL_MAP 0xFFC00C6C /* DMA Channel 1 Peripheral Map Register */
293 #define DMA1_CURR_X_COUNT 0xFFC00C70 /* DMA Channel 1 Current X Count Register */
294 #define DMA1_CURR_Y_COUNT 0xFFC00C78 /* DMA Channel 1 Current Y Count Register */
296 #define DMA2_NEXT_DESC_PTR 0xFFC00C80 /* DMA Channel 2 Next Descriptor Pointer Register */
297 #define DMA2_START_ADDR 0xFFC00C84 /* DMA Channel 2 Start Address Register */
298 #define DMA2_CONFIG 0xFFC00C88 /* DMA Channel 2 Configuration Register */
299 #define DMA2_X_COUNT 0xFFC00C90 /* DMA Channel 2 X Count Register */
300 #define DMA2_X_MODIFY 0xFFC00C94 /* DMA Channel 2 X Modify Register */
301 #define DMA2_Y_COUNT 0xFFC00C98 /* DMA Channel 2 Y Count Register */
302 #define DMA2_Y_MODIFY 0xFFC00C9C /* DMA Channel 2 Y Modify Register */
303 #define DMA2_CURR_DESC_PTR 0xFFC00CA0 /* DMA Channel 2 Current Descriptor Pointer Register */
304 #define DMA2_CURR_ADDR 0xFFC00CA4 /* DMA Channel 2 Current Address Register */
305 #define DMA2_IRQ_STATUS 0xFFC00CA8 /* DMA Channel 2 Interrupt/Status Register */
306 #define DMA2_PERIPHERAL_MAP 0xFFC00CAC /* DMA Channel 2 Peripheral Map Register */
307 #define DMA2_CURR_X_COUNT 0xFFC00CB0 /* DMA Channel 2 Current X Count Register */
308 #define DMA2_CURR_Y_COUNT 0xFFC00CB8 /* DMA Channel 2 Current Y Count Register */
310 #define DMA3_NEXT_DESC_PTR 0xFFC00CC0 /* DMA Channel 3 Next Descriptor Pointer Register */
311 #define DMA3_START_ADDR 0xFFC00CC4 /* DMA Channel 3 Start Address Register */
312 #define DMA3_CONFIG 0xFFC00CC8 /* DMA Channel 3 Configuration Register */
313 #define DMA3_X_COUNT 0xFFC00CD0 /* DMA Channel 3 X Count Register */
314 #define DMA3_X_MODIFY 0xFFC00CD4 /* DMA Channel 3 X Modify Register */
315 #define DMA3_Y_COUNT 0xFFC00CD8 /* DMA Channel 3 Y Count Register */
316 #define DMA3_Y_MODIFY 0xFFC00CDC /* DMA Channel 3 Y Modify Register */
317 #define DMA3_CURR_DESC_PTR 0xFFC00CE0 /* DMA Channel 3 Current Descriptor Pointer Register */
318 #define DMA3_CURR_ADDR 0xFFC00CE4 /* DMA Channel 3 Current Address Register */
319 #define DMA3_IRQ_STATUS 0xFFC00CE8 /* DMA Channel 3 Interrupt/Status Register */
320 #define DMA3_PERIPHERAL_MAP 0xFFC00CEC /* DMA Channel 3 Peripheral Map Register */
321 #define DMA3_CURR_X_COUNT 0xFFC00CF0 /* DMA Channel 3 Current X Count Register */
322 #define DMA3_CURR_Y_COUNT 0xFFC00CF8 /* DMA Channel 3 Current Y Count Register */
324 #define DMA4_NEXT_DESC_PTR 0xFFC00D00 /* DMA Channel 4 Next Descriptor Pointer Register */
325 #define DMA4_START_ADDR 0xFFC00D04 /* DMA Channel 4 Start Address Register */
326 #define DMA4_CONFIG 0xFFC00D08 /* DMA Channel 4 Configuration Register */
327 #define DMA4_X_COUNT 0xFFC00D10 /* DMA Channel 4 X Count Register */
328 #define DMA4_X_MODIFY 0xFFC00D14 /* DMA Channel 4 X Modify Register */
329 #define DMA4_Y_COUNT 0xFFC00D18 /* DMA Channel 4 Y Count Register */
330 #define DMA4_Y_MODIFY 0xFFC00D1C /* DMA Channel 4 Y Modify Register */
331 #define DMA4_CURR_DESC_PTR 0xFFC00D20 /* DMA Channel 4 Current Descriptor Pointer Register */
332 #define DMA4_CURR_ADDR 0xFFC00D24 /* DMA Channel 4 Current Address Register */
333 #define DMA4_IRQ_STATUS 0xFFC00D28 /* DMA Channel 4 Interrupt/Status Register */
334 #define DMA4_PERIPHERAL_MAP 0xFFC00D2C /* DMA Channel 4 Peripheral Map Register */
335 #define DMA4_CURR_X_COUNT 0xFFC00D30 /* DMA Channel 4 Current X Count Register */
336 #define DMA4_CURR_Y_COUNT 0xFFC00D38 /* DMA Channel 4 Current Y Count Register */
338 #define DMA5_NEXT_DESC_PTR 0xFFC00D40 /* DMA Channel 5 Next Descriptor Pointer Register */
339 #define DMA5_START_ADDR 0xFFC00D44 /* DMA Channel 5 Start Address Register */
340 #define DMA5_CONFIG 0xFFC00D48 /* DMA Channel 5 Configuration Register */
341 #define DMA5_X_COUNT 0xFFC00D50 /* DMA Channel 5 X Count Register */
342 #define DMA5_X_MODIFY 0xFFC00D54 /* DMA Channel 5 X Modify Register */
343 #define DMA5_Y_COUNT 0xFFC00D58 /* DMA Channel 5 Y Count Register */
344 #define DMA5_Y_MODIFY 0xFFC00D5C /* DMA Channel 5 Y Modify Register */
345 #define DMA5_CURR_DESC_PTR 0xFFC00D60 /* DMA Channel 5 Current Descriptor Pointer Register */
346 #define DMA5_CURR_ADDR 0xFFC00D64 /* DMA Channel 5 Current Address Register */
347 #define DMA5_IRQ_STATUS 0xFFC00D68 /* DMA Channel 5 Interrupt/Status Register */
348 #define DMA5_PERIPHERAL_MAP 0xFFC00D6C /* DMA Channel 5 Peripheral Map Register */
349 #define DMA5_CURR_X_COUNT 0xFFC00D70 /* DMA Channel 5 Current X Count Register */
350 #define DMA5_CURR_Y_COUNT 0xFFC00D78 /* DMA Channel 5 Current Y Count Register */
352 #define DMA6_NEXT_DESC_PTR 0xFFC00D80 /* DMA Channel 6 Next Descriptor Pointer Register */
353 #define DMA6_START_ADDR 0xFFC00D84 /* DMA Channel 6 Start Address Register */
354 #define DMA6_CONFIG 0xFFC00D88 /* DMA Channel 6 Configuration Register */
355 #define DMA6_X_COUNT 0xFFC00D90 /* DMA Channel 6 X Count Register */
356 #define DMA6_X_MODIFY 0xFFC00D94 /* DMA Channel 6 X Modify Register */
357 #define DMA6_Y_COUNT 0xFFC00D98 /* DMA Channel 6 Y Count Register */
358 #define DMA6_Y_MODIFY 0xFFC00D9C /* DMA Channel 6 Y Modify Register */
359 #define DMA6_CURR_DESC_PTR 0xFFC00DA0 /* DMA Channel 6 Current Descriptor Pointer Register */
360 #define DMA6_CURR_ADDR 0xFFC00DA4 /* DMA Channel 6 Current Address Register */
361 #define DMA6_IRQ_STATUS 0xFFC00DA8 /* DMA Channel 6 Interrupt/Status Register */
362 #define DMA6_PERIPHERAL_MAP 0xFFC00DAC /* DMA Channel 6 Peripheral Map Register */
363 #define DMA6_CURR_X_COUNT 0xFFC00DB0 /* DMA Channel 6 Current X Count Register */
364 #define DMA6_CURR_Y_COUNT 0xFFC00DB8 /* DMA Channel 6 Current Y Count Register */
366 #define DMA7_NEXT_DESC_PTR 0xFFC00DC0 /* DMA Channel 7 Next Descriptor Pointer Register */
367 #define DMA7_START_ADDR 0xFFC00DC4 /* DMA Channel 7 Start Address Register */
368 #define DMA7_CONFIG 0xFFC00DC8 /* DMA Channel 7 Configuration Register */
369 #define DMA7_X_COUNT 0xFFC00DD0 /* DMA Channel 7 X Count Register */
370 #define DMA7_X_MODIFY 0xFFC00DD4 /* DMA Channel 7 X Modify Register */
371 #define DMA7_Y_COUNT 0xFFC00DD8 /* DMA Channel 7 Y Count Register */
372 #define DMA7_Y_MODIFY 0xFFC00DDC /* DMA Channel 7 Y Modify Register */
373 #define DMA7_CURR_DESC_PTR 0xFFC00DE0 /* DMA Channel 7 Current Descriptor Pointer Register */
374 #define DMA7_CURR_ADDR 0xFFC00DE4 /* DMA Channel 7 Current Address Register */
375 #define DMA7_IRQ_STATUS 0xFFC00DE8 /* DMA Channel 7 Interrupt/Status Register */
376 #define DMA7_PERIPHERAL_MAP 0xFFC00DEC /* DMA Channel 7 Peripheral Map Register */
377 #define DMA7_CURR_X_COUNT 0xFFC00DF0 /* DMA Channel 7 Current X Count Register */
378 #define DMA7_CURR_Y_COUNT 0xFFC00DF8 /* DMA Channel 7 Current Y Count Register */
380 #define DMA8_NEXT_DESC_PTR 0xFFC00E00 /* DMA Channel 8 Next Descriptor Pointer Register */
381 #define DMA8_START_ADDR 0xFFC00E04 /* DMA Channel 8 Start Address Register */
382 #define DMA8_CONFIG 0xFFC00E08 /* DMA Channel 8 Configuration Register */
383 #define DMA8_X_COUNT 0xFFC00E10 /* DMA Channel 8 X Count Register */
384 #define DMA8_X_MODIFY 0xFFC00E14 /* DMA Channel 8 X Modify Register */
385 #define DMA8_Y_COUNT 0xFFC00E18 /* DMA Channel 8 Y Count Register */
386 #define DMA8_Y_MODIFY 0xFFC00E1C /* DMA Channel 8 Y Modify Register */
387 #define DMA8_CURR_DESC_PTR 0xFFC00E20 /* DMA Channel 8 Current Descriptor Pointer Register */
388 #define DMA8_CURR_ADDR 0xFFC00E24 /* DMA Channel 8 Current Address Register */
389 #define DMA8_IRQ_STATUS 0xFFC00E28 /* DMA Channel 8 Interrupt/Status Register */
390 #define DMA8_PERIPHERAL_MAP 0xFFC00E2C /* DMA Channel 8 Peripheral Map Register */
391 #define DMA8_CURR_X_COUNT 0xFFC00E30 /* DMA Channel 8 Current X Count Register */
392 #define DMA8_CURR_Y_COUNT 0xFFC00E38 /* DMA Channel 8 Current Y Count Register */
394 #define DMA9_NEXT_DESC_PTR 0xFFC00E40 /* DMA Channel 9 Next Descriptor Pointer Register */
395 #define DMA9_START_ADDR 0xFFC00E44 /* DMA Channel 9 Start Address Register */
396 #define DMA9_CONFIG 0xFFC00E48 /* DMA Channel 9 Configuration Register */
397 #define DMA9_X_COUNT 0xFFC00E50 /* DMA Channel 9 X Count Register */
398 #define DMA9_X_MODIFY 0xFFC00E54 /* DMA Channel 9 X Modify Register */
399 #define DMA9_Y_COUNT 0xFFC00E58 /* DMA Channel 9 Y Count Register */
400 #define DMA9_Y_MODIFY 0xFFC00E5C /* DMA Channel 9 Y Modify Register */
401 #define DMA9_CURR_DESC_PTR 0xFFC00E60 /* DMA Channel 9 Current Descriptor Pointer Register */
402 #define DMA9_CURR_ADDR 0xFFC00E64 /* DMA Channel 9 Current Address Register */
403 #define DMA9_IRQ_STATUS 0xFFC00E68 /* DMA Channel 9 Interrupt/Status Register */
404 #define DMA9_PERIPHERAL_MAP 0xFFC00E6C /* DMA Channel 9 Peripheral Map Register */
405 #define DMA9_CURR_X_COUNT 0xFFC00E70 /* DMA Channel 9 Current X Count Register */
406 #define DMA9_CURR_Y_COUNT 0xFFC00E78 /* DMA Channel 9 Current Y Count Register */
408 #define DMA10_NEXT_DESC_PTR 0xFFC00E80 /* DMA Channel 10 Next Descriptor Pointer Register */
409 #define DMA10_START_ADDR 0xFFC00E84 /* DMA Channel 10 Start Address Register */
410 #define DMA10_CONFIG 0xFFC00E88 /* DMA Channel 10 Configuration Register */
411 #define DMA10_X_COUNT 0xFFC00E90 /* DMA Channel 10 X Count Register */
412 #define DMA10_X_MODIFY 0xFFC00E94 /* DMA Channel 10 X Modify Register */
413 #define DMA10_Y_COUNT 0xFFC00E98 /* DMA Channel 10 Y Count Register */
414 #define DMA10_Y_MODIFY 0xFFC00E9C /* DMA Channel 10 Y Modify Register */
415 #define DMA10_CURR_DESC_PTR 0xFFC00EA0 /* DMA Channel 10 Current Descriptor Pointer Register */
416 #define DMA10_CURR_ADDR 0xFFC00EA4 /* DMA Channel 10 Current Address Register */
417 #define DMA10_IRQ_STATUS 0xFFC00EA8 /* DMA Channel 10 Interrupt/Status Register */
418 #define DMA10_PERIPHERAL_MAP 0xFFC00EAC /* DMA Channel 10 Peripheral Map Register */
419 #define DMA10_CURR_X_COUNT 0xFFC00EB0 /* DMA Channel 10 Current X Count Register */
420 #define DMA10_CURR_Y_COUNT 0xFFC00EB8 /* DMA Channel 10 Current Y Count Register */
422 #define DMA11_NEXT_DESC_PTR 0xFFC00EC0 /* DMA Channel 11 Next Descriptor Pointer Register */
423 #define DMA11_START_ADDR 0xFFC00EC4 /* DMA Channel 11 Start Address Register */
424 #define DMA11_CONFIG 0xFFC00EC8 /* DMA Channel 11 Configuration Register */
425 #define DMA11_X_COUNT 0xFFC00ED0 /* DMA Channel 11 X Count Register */
426 #define DMA11_X_MODIFY 0xFFC00ED4 /* DMA Channel 11 X Modify Register */
427 #define DMA11_Y_COUNT 0xFFC00ED8 /* DMA Channel 11 Y Count Register */
428 #define DMA11_Y_MODIFY 0xFFC00EDC /* DMA Channel 11 Y Modify Register */
429 #define DMA11_CURR_DESC_PTR 0xFFC00EE0 /* DMA Channel 11 Current Descriptor Pointer Register */
430 #define DMA11_CURR_ADDR 0xFFC00EE4 /* DMA Channel 11 Current Address Register */
431 #define DMA11_IRQ_STATUS 0xFFC00EE8 /* DMA Channel 11 Interrupt/Status Register */
432 #define DMA11_PERIPHERAL_MAP 0xFFC00EEC /* DMA Channel 11 Peripheral Map Register */
433 #define DMA11_CURR_X_COUNT 0xFFC00EF0 /* DMA Channel 11 Current X Count Register */
434 #define DMA11_CURR_Y_COUNT 0xFFC00EF8 /* DMA Channel 11 Current Y Count Register */
436 #define MDMA_D0_NEXT_DESC_PTR 0xFFC00F00 /* MemDMA Stream 0 Destination Next Descriptor Pointer Register */
437 #define MDMA_D0_START_ADDR 0xFFC00F04 /* MemDMA Stream 0 Destination Start Address Register */
438 #define MDMA_D0_CONFIG 0xFFC00F08 /* MemDMA Stream 0 Destination Configuration Register */
439 #define MDMA_D0_X_COUNT 0xFFC00F10 /* MemDMA Stream 0 Destination X Count Register */
440 #define MDMA_D0_X_MODIFY 0xFFC00F14 /* MemDMA Stream 0 Destination X Modify Register */
441 #define MDMA_D0_Y_COUNT 0xFFC00F18 /* MemDMA Stream 0 Destination Y Count Register */
442 #define MDMA_D0_Y_MODIFY 0xFFC00F1C /* MemDMA Stream 0 Destination Y Modify Register */
443 #define MDMA_D0_CURR_DESC_PTR 0xFFC00F20 /* MemDMA Stream 0 Destination Current Descriptor Pointer Register*/
444 #define MDMA_D0_CURR_ADDR 0xFFC00F24 /* MemDMA Stream 0 Destination Current Address Register */
445 #define MDMA_D0_IRQ_STATUS 0xFFC00F28 /* MemDMA Stream 0 Destination Interrupt/Status Register */
446 #define MDMA_D0_PERIPHERAL_MAP 0xFFC00F2C /* MemDMA Stream 0 Destination Peripheral Map Register */
447 #define MDMA_D0_CURR_X_COUNT 0xFFC00F30 /* MemDMA Stream 0 Destination Current X Count Register */
448 #define MDMA_D0_CURR_Y_COUNT 0xFFC00F38 /* MemDMA Stream 0 Destination Current Y Count Register */
450 #define MDMA_S0_NEXT_DESC_PTR 0xFFC00F40 /* MemDMA Stream 0 Source Next Descriptor Pointer Register */
451 #define MDMA_S0_START_ADDR 0xFFC00F44 /* MemDMA Stream 0 Source Start Address Register */
452 #define MDMA_S0_CONFIG 0xFFC00F48 /* MemDMA Stream 0 Source Configuration Register */
453 #define MDMA_S0_X_COUNT 0xFFC00F50 /* MemDMA Stream 0 Source X Count Register */
454 #define MDMA_S0_X_MODIFY 0xFFC00F54 /* MemDMA Stream 0 Source X Modify Register */
455 #define MDMA_S0_Y_COUNT 0xFFC00F58 /* MemDMA Stream 0 Source Y Count Register */
456 #define MDMA_S0_Y_MODIFY 0xFFC00F5C /* MemDMA Stream 0 Source Y Modify Register */
457 #define MDMA_S0_CURR_DESC_PTR 0xFFC00F60 /* MemDMA Stream 0 Source Current Descriptor Pointer Register */
458 #define MDMA_S0_CURR_ADDR 0xFFC00F64 /* MemDMA Stream 0 Source Current Address Register */
459 #define MDMA_S0_IRQ_STATUS 0xFFC00F68 /* MemDMA Stream 0 Source Interrupt/Status Register */
460 #define MDMA_S0_PERIPHERAL_MAP 0xFFC00F6C /* MemDMA Stream 0 Source Peripheral Map Register */
461 #define MDMA_S0_CURR_X_COUNT 0xFFC00F70 /* MemDMA Stream 0 Source Current X Count Register */
462 #define MDMA_S0_CURR_Y_COUNT 0xFFC00F78 /* MemDMA Stream 0 Source Current Y Count Register */
464 #define MDMA_D1_NEXT_DESC_PTR 0xFFC00F80 /* MemDMA Stream 1 Destination Next Descriptor Pointer Register */
465 #define MDMA_D1_START_ADDR 0xFFC00F84 /* MemDMA Stream 1 Destination Start Address Register */
466 #define MDMA_D1_CONFIG 0xFFC00F88 /* MemDMA Stream 1 Destination Configuration Register */
467 #define MDMA_D1_X_COUNT 0xFFC00F90 /* MemDMA Stream 1 Destination X Count Register */
468 #define MDMA_D1_X_MODIFY 0xFFC00F94 /* MemDMA Stream 1 Destination X Modify Register */
469 #define MDMA_D1_Y_COUNT 0xFFC00F98 /* MemDMA Stream 1 Destination Y Count Register */
470 #define MDMA_D1_Y_MODIFY 0xFFC00F9C /* MemDMA Stream 1 Destination Y Modify Register */
471 #define MDMA_D1_CURR_DESC_PTR 0xFFC00FA0 /* MemDMA Stream 1 Destination Current Descriptor Pointer Register*/
472 #define MDMA_D1_CURR_ADDR 0xFFC00FA4 /* MemDMA Stream 1 Destination Current Address Register */
473 #define MDMA_D1_IRQ_STATUS 0xFFC00FA8 /* MemDMA Stream 1 Destination Interrupt/Status Register */
474 #define MDMA_D1_PERIPHERAL_MAP 0xFFC00FAC /* MemDMA Stream 1 Destination Peripheral Map Register */
475 #define MDMA_D1_CURR_X_COUNT 0xFFC00FB0 /* MemDMA Stream 1 Destination Current X Count Register */
476 #define MDMA_D1_CURR_Y_COUNT 0xFFC00FB8 /* MemDMA Stream 1 Destination Current Y Count Register */
478 #define MDMA_S1_NEXT_DESC_PTR 0xFFC00FC0 /* MemDMA Stream 1 Source Next Descriptor Pointer Register */
479 #define MDMA_S1_START_ADDR 0xFFC00FC4 /* MemDMA Stream 1 Source Start Address Register */
480 #define MDMA_S1_CONFIG 0xFFC00FC8 /* MemDMA Stream 1 Source Configuration Register */
481 #define MDMA_S1_X_COUNT 0xFFC00FD0 /* MemDMA Stream 1 Source X Count Register */
482 #define MDMA_S1_X_MODIFY 0xFFC00FD4 /* MemDMA Stream 1 Source X Modify Register */
483 #define MDMA_S1_Y_COUNT 0xFFC00FD8 /* MemDMA Stream 1 Source Y Count Register */
484 #define MDMA_S1_Y_MODIFY 0xFFC00FDC /* MemDMA Stream 1 Source Y Modify Register */
485 #define MDMA_S1_CURR_DESC_PTR 0xFFC00FE0 /* MemDMA Stream 1 Source Current Descriptor Pointer Register */
486 #define MDMA_S1_CURR_ADDR 0xFFC00FE4 /* MemDMA Stream 1 Source Current Address Register */
487 #define MDMA_S1_IRQ_STATUS 0xFFC00FE8 /* MemDMA Stream 1 Source Interrupt/Status Register */
488 #define MDMA_S1_PERIPHERAL_MAP 0xFFC00FEC /* MemDMA Stream 1 Source Peripheral Map Register */
489 #define MDMA_S1_CURR_X_COUNT 0xFFC00FF0 /* MemDMA Stream 1 Source Current X Count Register */
490 #define MDMA_S1_CURR_Y_COUNT 0xFFC00FF8 /* MemDMA Stream 1 Source Current Y Count Register */
493 /* Parallel Peripheral Interface (0xFFC01000 - 0xFFC010FF) */
494 #define PPI_CONTROL 0xFFC01000 /* PPI Control Register */
495 #define PPI_STATUS 0xFFC01004 /* PPI Status Register */
496 #define PPI_COUNT 0xFFC01008 /* PPI Transfer Count Register */
497 #define PPI_DELAY 0xFFC0100C /* PPI Delay Count Register */
498 #define PPI_FRAME 0xFFC01010 /* PPI Frame Length Register */
501 /* Two-Wire Interface (0xFFC01400 - 0xFFC014FF) */
502 #define TWI_CLKDIV 0xFFC01400 /* Serial Clock Divider Register */
503 #define TWI_CONTROL 0xFFC01404 /* TWI Control Register */
504 #define TWI_SLAVE_CTL 0xFFC01408 /* Slave Mode Control Register */
505 #define TWI_SLAVE_STAT 0xFFC0140C /* Slave Mode Status Register */
506 #define TWI_SLAVE_ADDR 0xFFC01410 /* Slave Mode Address Register */
507 #define TWI_MASTER_CTL 0xFFC01414 /* Master Mode Control Register */
508 #define TWI_MASTER_STAT 0xFFC01418 /* Master Mode Status Register */
509 #define TWI_MASTER_ADDR 0xFFC0141C /* Master Mode Address Register */
510 #define TWI_INT_STAT 0xFFC01420 /* TWI Interrupt Status Register */
511 #define TWI_INT_MASK 0xFFC01424 /* TWI Master Interrupt Mask Register */
512 #define TWI_FIFO_CTL 0xFFC01428 /* FIFO Control Register */
513 #define TWI_FIFO_STAT 0xFFC0142C /* FIFO Status Register */
514 #define TWI_XMT_DATA8 0xFFC01480 /* FIFO Transmit Data Single Byte Register */
515 #define TWI_XMT_DATA16 0xFFC01484 /* FIFO Transmit Data Double Byte Register */
516 #define TWI_RCV_DATA8 0xFFC01488 /* FIFO Receive Data Single Byte Register */
517 #define TWI_RCV_DATA16 0xFFC0148C /* FIFO Receive Data Double Byte Register */
520 /* General Purpose I/O Port G (0xFFC01500 - 0xFFC015FF) */
521 #define PORTGIO 0xFFC01500 /* Port G I/O Pin State Specify Register */
522 #define PORTGIO_CLEAR 0xFFC01504 /* Port G I/O Peripheral Interrupt Clear Register */
523 #define PORTGIO_SET 0xFFC01508 /* Port G I/O Peripheral Interrupt Set Register */
524 #define PORTGIO_TOGGLE 0xFFC0150C /* Port G I/O Pin State Toggle Register */
525 #define PORTGIO_MASKA 0xFFC01510 /* Port G I/O Mask State Specify Interrupt A Register */
526 #define PORTGIO_MASKA_CLEAR 0xFFC01514 /* Port G I/O Mask Disable Interrupt A Register */
527 #define PORTGIO_MASKA_SET 0xFFC01518 /* Port G I/O Mask Enable Interrupt A Register */
528 #define PORTGIO_MASKA_TOGGLE 0xFFC0151C /* Port G I/O Mask Toggle Enable Interrupt A Register */
529 #define PORTGIO_MASKB 0xFFC01520 /* Port G I/O Mask State Specify Interrupt B Register */
530 #define PORTGIO_MASKB_CLEAR 0xFFC01524 /* Port G I/O Mask Disable Interrupt B Register */
531 #define PORTGIO_MASKB_SET 0xFFC01528 /* Port G I/O Mask Enable Interrupt B Register */
532 #define PORTGIO_MASKB_TOGGLE 0xFFC0152C /* Port G I/O Mask Toggle Enable Interrupt B Register */
533 #define PORTGIO_DIR 0xFFC01530 /* Port G I/O Direction Register */
534 #define PORTGIO_POLAR 0xFFC01534 /* Port G I/O Source Polarity Register */
535 #define PORTGIO_EDGE 0xFFC01538 /* Port G I/O Source Sensitivity Register */
536 #define PORTGIO_BOTH 0xFFC0153C /* Port G I/O Set on BOTH Edges Register */
537 #define PORTGIO_INEN 0xFFC01540 /* Port G I/O Input Enable Register */
540 /* General Purpose I/O Port H (0xFFC01700 - 0xFFC017FF) */
541 #define PORTHIO 0xFFC01700 /* Port H I/O Pin State Specify Register */
542 #define PORTHIO_CLEAR 0xFFC01704 /* Port H I/O Peripheral Interrupt Clear Register */
543 #define PORTHIO_SET 0xFFC01708 /* Port H I/O Peripheral Interrupt Set Register */
544 #define PORTHIO_TOGGLE 0xFFC0170C /* Port H I/O Pin State Toggle Register */
545 #define PORTHIO_MASKA 0xFFC01710 /* Port H I/O Mask State Specify Interrupt A Register */
546 #define PORTHIO_MASKA_CLEAR 0xFFC01714 /* Port H I/O Mask Disable Interrupt A Register */
547 #define PORTHIO_MASKA_SET 0xFFC01718 /* Port H I/O Mask Enable Interrupt A Register */
548 #define PORTHIO_MASKA_TOGGLE 0xFFC0171C /* Port H I/O Mask Toggle Enable Interrupt A Register */
549 #define PORTHIO_MASKB 0xFFC01720 /* Port H I/O Mask State Specify Interrupt B Register */
550 #define PORTHIO_MASKB_CLEAR 0xFFC01724 /* Port H I/O Mask Disable Interrupt B Register */
551 #define PORTHIO_MASKB_SET 0xFFC01728 /* Port H I/O Mask Enable Interrupt B Register */
552 #define PORTHIO_MASKB_TOGGLE 0xFFC0172C /* Port H I/O Mask Toggle Enable Interrupt B Register */
553 #define PORTHIO_DIR 0xFFC01730 /* Port H I/O Direction Register */
554 #define PORTHIO_POLAR 0xFFC01734 /* Port H I/O Source Polarity Register */
555 #define PORTHIO_EDGE 0xFFC01738 /* Port H I/O Source Sensitivity Register */
556 #define PORTHIO_BOTH 0xFFC0173C /* Port H I/O Set on BOTH Edges Register */
557 #define PORTHIO_INEN 0xFFC01740 /* Port H I/O Input Enable Register */
560 /* UART1 Controller (0xFFC02000 - 0xFFC020FF) */
561 #define UART1_THR 0xFFC02000 /* Transmit Holding register */
562 #define UART1_RBR 0xFFC02000 /* Receive Buffer register */
563 #define UART1_DLL 0xFFC02000 /* Divisor Latch (Low-Byte) */
564 #define UART1_IER 0xFFC02004 /* Interrupt Enable Register */
565 #define UART1_DLH 0xFFC02004 /* Divisor Latch (High-Byte) */
566 #define UART1_IIR 0xFFC02008 /* Interrupt Identification Register */
567 #define UART1_LCR 0xFFC0200C /* Line Control Register */
568 #define UART1_MCR 0xFFC02010 /* Modem Control Register */
569 #define UART1_LSR 0xFFC02014 /* Line Status Register */
570 #define UART1_SCR 0xFFC0201C /* SCR Scratch Register */
571 #define UART1_GCTL 0xFFC02024 /* Global Control Register */
574 /* Pin Control Registers (0xFFC03200 - 0xFFC032FF) */
575 #define PORTF_FER 0xFFC03200 /* Port F Function Enable Register (Alternate/Flag*) */
576 #define PORTG_FER 0xFFC03204 /* Port G Function Enable Register (Alternate/Flag*) */
577 #define PORTH_FER 0xFFC03208 /* Port H Function Enable Register (Alternate/Flag*) */
580 /* GPIO PIN mux (0xFFC03210 - OxFFC03288) */
581 #define PORTF_MUX 0xFFC03210 /* Port F mux control */
582 #define PORTG_MUX 0xFFC03214 /* Port G mux control */
583 #define PORTH_MUX 0xFFC03218 /* Port H mux control */
584 #define PORTF_DRIVE 0xFFC03220 /* Port F drive strength control */
585 #define PORTG_DRIVE 0xFFC03224 /* Port G drive strength control */
586 #define PORTH_DRIVE 0xFFC03228 /* Port H drive strength control */
587 #define PORTF_HYSTERESIS 0xFFC03240 /* Port F Schmitt trigger control */
588 #define PORTG_HYSTERESIS 0xFFC03244 /* Port G Schmitt trigger control */
589 #define PORTH_HYSTERESIS 0xFFC03248 /* Port H Schmitt trigger control */
590 #define NONGPIO_DRIVE 0xFFC03280 /* Misc Port drive strength control */
591 #define NONGPIO_HYSTERESIS 0xFFC03288 /* Misc Port Schmitt Trigger control */
594 /* Handshake MDMA Registers (0xFFC03300 - 0xFFC033FF) */
595 #define HMDMA0_CONTROL 0xFFC03300 /* Handshake MDMA0 Control Register */
596 #define HMDMA0_ECINIT 0xFFC03304 /* HMDMA0 Initial Edge Count Register */
597 #define HMDMA0_BCINIT 0xFFC03308 /* HMDMA0 Initial Block Count Register */
598 #define HMDMA0_ECURGENT 0xFFC0330C /* HMDMA0 Urgent Edge Count Threshhold Register */
599 #define HMDMA0_ECOVERFLOW 0xFFC03310 /* HMDMA0 Edge Count Overflow Interrupt Register */
600 #define HMDMA0_ECOUNT 0xFFC03314 /* HMDMA0 Current Edge Count Register */
601 #define HMDMA0_BCOUNT 0xFFC03318 /* HMDMA0 Current Block Count Register */
603 #define HMDMA1_CONTROL 0xFFC03340 /* Handshake MDMA1 Control Register */
604 #define HMDMA1_ECINIT 0xFFC03344 /* HMDMA1 Initial Edge Count Register */
605 #define HMDMA1_BCINIT 0xFFC03348 /* HMDMA1 Initial Block Count Register */
606 #define HMDMA1_ECURGENT 0xFFC0334C /* HMDMA1 Urgent Edge Count Threshhold Register */
607 #define HMDMA1_ECOVERFLOW 0xFFC03350 /* HMDMA1 Edge Count Overflow Interrupt Register */
608 #define HMDMA1_ECOUNT 0xFFC03354 /* HMDMA1 Current Edge Count Register */
609 #define HMDMA1_BCOUNT 0xFFC03358 /* HMDMA1 Current Block Count Register */
612 /* SPI1 Controller (0xFFC03400 - 0xFFC034FF) */
613 #define SPI1_CTL 0xFFC03400 /* SPI0 Control Register */
614 #define SPI1_FLG 0xFFC03404 /* SPI0 Flag register */
615 #define SPI1_STAT 0xFFC03408 /* SPI0 Status register */
616 #define SPI1_TDBR 0xFFC0340C /* SPI0 Transmit Data Buffer Register */
617 #define SPI1_RDBR 0xFFC03410 /* SPI0 Receive Data Buffer Register */
618 #define SPI1_BAUD 0xFFC03414 /* SPI0 Baud rate Register */
619 #define SPI1_SHADOW 0xFFC03418 /* SPI0_RDBR Shadow Register */
622 /* Counter Registers (0xFFC03500 - 0xFFC035FF) */
623 #define CNT_CONFIG 0xFFC03500 /* Configuration Register */
624 #define CNT_IMASK 0xFFC03504 /* Interrupt Mask Register */
625 #define CNT_STATUS 0xFFC03508 /* Status Register */
626 #define CNT_COMMAND 0xFFC0350C /* Command Register */
627 #define CNT_DEBOUNCE 0xFFC03510 /* Debounce Register */
628 #define CNT_COUNTER 0xFFC03514 /* Counter Register */
629 #define CNT_MAX 0xFFC03518 /* Boundry Value Register - max count */
630 #define CNT_MIN 0xFFC0351C /* Boundry Value Register - min count */
633 /* OTP/FUSE Registers (0xFFC03600 - 0xFFC036FF) */
634 #define OTP_CONTROL 0xFFC03600 /* OTPSEC Fuse Control */
635 #define OTP_BEN 0xFFC03604 /* OTPSEC Fuse Byte Enable */
636 #define OTP_STATUS 0xFFC03608 /* OTPSEC Fuse Status */
637 #define OTP_TIMING 0xFFC0360C /* OTPSEC Fuse SCLK Divider */
639 /* Security Registers */
640 #define SECURE_SYSSWT 0xFFC03620 /* OTPSEC Secure System Switches */
641 #define SECURE_CONTROL 0xFFC03624 /* OTPSEC Secure Control */
642 #define SECURE_STATUS 0xFFC03628 /* OTPSEC Secure Status */
644 /* OTP Read/Write Data Buffer Registers */
645 #define OTP_DATA0 0xFFC03680 /* OTP Read Write buffer */
646 #define OTP_DATA1 0xFFC03684 /* OTP Read Write buffer */
647 #define OTP_DATA2 0xFFC03688 /* OTP Read Write buffer */
648 #define OTP_DATA3 0xFFC0368C /* OTP Read Write buffer */
651 /* Motor Control PWM Registers (0xFFC03700 - 0xFFC037FF) */
652 #define PWM_CTRL 0xFFC03700 /* PWM Control Register */
653 #define PWM_STAT 0xFFC03704 /* PWM Status Register */
654 #define PWM_TM 0xFFC03708 /* PWM Period Register */
655 #define PWM_DT 0xFFC0370C /* PWM Dead Time Register */
656 #define PWM_GATE 0xFFC03710 /* PWM Chopping Control */
657 #define PWM_CHA 0xFFC03714 /* PWM Channel A Duty Control */
658 #define PWM_CHB 0xFFC03718 /* PWM Channel B Duty Control */
659 #define PWM_CHC 0xFFC0371C /* PWM Channel C Duty Control */
660 #define PWM_SEG 0xFFC03720 /* PWM Crossover and Output Enable */
661 #define PWM_SYNCWT 0xFFC03724 /* PWM Sync pulse width control */
662 #define PWM_CHAL 0xFFC03728 /* PWM Channel AL Duty Control (SR mode only) */
663 #define PWM_CHBL 0xFFC0372C /* PWM Channel BL Duty Control (SR mode only) */
664 #define PWM_CHCL 0xFFC03730 /* PWM Channel CL Duty Control (SR mode only) */
665 #define PWM_LSI 0xFFC03734 /* Low Side Invert (SR mode only) */
666 #define PWM_STAT2 0xFFC03738 /* PWM Status Register */
670 /******************************************************************************************************************
671 ** System MMR Register Bits And Macros
673 ** Disclaimer: All macros are intended to make C and Assembly code more readable.
674 ** Use these macros carefully, as any that do left shifts for field
675 ** depositing will result in the lower order bits being destroyed. Any
676 ** macro that shifts left to properly position the bit-field should be
677 ** used as part of an OR to initialize a register and NOT as a dynamic
678 ** modifier UNLESS the lower order bits are saved and ORed back in when
679 ** the macro is used.
680 *******************************************************************************************************************/
682 /************************************** PLL AND RESET MASKS *******************************************************/
685 #define DF 0x0001 /* 0: PLL = CLKIN, 1: PLL = CLKIN/2 */
686 #define PLL_OFF 0x0002 /* PLL Not Powered */
687 #define STOPCK 0x0008 /* Core Clock Off */
688 #define PDWN 0x0020 /* Enter Deep Sleep Mode */
689 #define IN_DELAY 0x0040 /* Add 200ps Delay To EBIU Input Latches */
690 #define OUT_DELAY 0x0080 /* Add 200ps Delay To EBIU Output Signals */
691 #define BYPASS 0x0100 /* Bypass the PLL */
692 #define MSEL 0x7E00 /* Multiplier Select For CCLK/VCO Factors */
694 /* PLL_CTL Macros (Only Use With Logic OR While Setting Lower Order Bits) */
696 #define SET_MSEL(x) (((x)&0x3Fu) << 0x9) /* Set MSEL = 0-63 --> VCO = CLKIN*MSEL */
698 #define SET_MSEL(x) (((x)&0x3F) << 0x9) /* Set MSEL = 0-63 --> VCO = CLKIN*MSEL */
699 #endif /* _MISRA_RULES */
702 #define SSEL 0x000F /* System Select */
703 #define CSEL 0x0030 /* Core Select */
704 #define CSEL_DIV1 0x0000 /* CCLK = VCO / 1 */
705 #define CSEL_DIV2 0x0010 /* CCLK = VCO / 2 */
706 #define CSEL_DIV4 0x0020 /* CCLK = VCO / 4 */
707 #define CSEL_DIV8 0x0030 /* CCLK = VCO / 8 */
711 #define SET_SSEL(x) ((x)&0xFu) /* Set SSEL = 0-15 --> SCLK = VCO/SSEL */
713 #define SET_SSEL(x) ((x)&0xF) /* Set SSEL = 0-15 --> SCLK = VCO/SSEL */
714 #endif /* _MISRA_RULES */
717 #define FREQ 0x3000 /* Switching Oscillator Frequency For Regulator */
718 #define HIBERNATE 0x0000 /* Powerdown/Bypass On-Board Regulation */
720 #define VLEV 0x00F0 /* Internal Voltage Level - Only Program Values Within Specifications */
721 #define VLEV_085 0x0040 /* VLEV = 0.85 V (See Datasheet for Regulator Tolerance) */
722 #define VLEV_090 0x0050 /* VLEV = 0.90 V (See Datasheet for Regulator Tolerance) */
723 #define VLEV_095 0x0060 /* VLEV = 0.95 V (See Datasheet for Regulator Tolerance) */
724 #define VLEV_100 0x0070 /* VLEV = 1.00 V (See Datasheet for Regulator Tolerance) */
725 #define VLEV_105 0x0080 /* VLEV = 1.05 V (See Datasheet for Regulator Tolerance) */
726 #define VLEV_110 0x0090 /* VLEV = 1.10 V (See Datasheet for Regulator Tolerance) */
727 #define VLEV_115 0x00A0 /* VLEV = 1.15 V (See Datasheet for Regulator Tolerance) */
728 #define VLEV_120 0x00B0 /* VLEV = 1.20 V (See Datasheet for Regulator Tolerance) */
730 #define WAKE 0x0100 /* Enable RTC/Reset Wakeup From Hibernate */
732 #define PHYWE 0x0400 /* Enable PHY Wakeup From Hibernate */
733 #define CLKBUFOE 0x4000 /* CLKIN Buffer Output Enable */
734 #define PHYCLKOE CLKBUFOE /* Alternative legacy name for the above */
735 #define SCKELOW 0x8000 /* Enable Drive CKE Low During Reset */
738 #define ACTIVE_PLLENABLED 0x0001 /* Processor In Active Mode With PLL Enabled */
739 #define FULL_ON 0x0002 /* Processor In Full On Mode */
740 #define ACTIVE_PLLDISABLED 0x0004 /* Processor In Active Mode With PLL Disabled */
741 #define PLL_LOCKED 0x0020 /* PLL_LOCKCNT Has Been Reached */
742 #define VSTAT 0x0080 /* Voltage Regulator Status: Regulator at programmed voltage */
745 #define SYSTEM_RESET 0x0007 /* Initiates A System Software Reset */
746 #define DOUBLE_FAULT 0x0008 /* Core Double Fault Causes Reset */
747 #define RESET_DOUBLE 0x2000 /* SW Reset Generated By Core Double-Fault */
748 #define RESET_WDOG 0x4000 /* SW Reset Generated By Watchdog Timer */
749 #define RESET_SOFTWARE 0x8000 /* SW Reset Occurred Since Last Read Of SWRST */
752 #define BMODE_BYPASS 0x0000 /* No boot mode */
753 #define BMODE_FLASH 0x0001 /* Use Boot ROM to load from 8-bit or 16-bit flash */
754 #define BMODE_SPI0MEM_INT 0x0002 /* Boot from internal SPI0 memory */
755 #define BMODE_SPI0MEM_EXT 0x0003 /* Boot from external SPI0 memory */
756 #define BMODE_SPI0HOST 0x0004 /* Boot from SPI0 host (slave mode) */
757 #define BMODE_OTPMEM 0x0005 /* Boot from OTP memory */
758 #define BMODE_SDRAMMEM 0x0006 /* Boot from SDRAM memory (warm boot) */
759 #define BMODE_UART0HOST 0x0007 /* Boot from UART0 host */
760 #define BMODE 0x0007 /* Boot Mode. Mirror of BMODE Mode Pins */
763 #define BCODE_NORMAL 0x0000 /* normal boot, update PLL/VR, quickboot as by WURESET */
764 #define BCODE_NOBOOT 0x0010 /* bypass boot, don't update PLL/VR */
765 #define BCODE_QUICKBOOT 0x0020 /* quick boot, overrule WURESET, don't update PLL/VR */
766 #define BCODE_ALLBOOT 0x0040 /* no quick boot, overrule WURESET, don't update PLL/VR */
767 #define BCODE_FULLBOOT 0x0060 /* no quick boot, overrule WURESET, update PLL/VR */
769 #define WURESET 0x1000 /* wakeup event since last hardware reset */
770 #define DFRESET 0x2000 /* recent reset was due to a double fault event */
771 #define WDRESET 0x4000 /* recent reset was due to a watchdog event */
772 #define SWRESET 0x8000 /* recent reset was issued by software */
774 /********************************* SYSTEM INTERRUPT CONTROLLER MASKS *********************************************/
776 /* Peripheral Masks For SIC_ISR0, SIC_IWR0, SIC_IMASK0 */
777 #define IRQ_PLL_WAKEUP 0x00000001 /* PLL Wakeup Interrupt */
778 #define IRQ_DMA_ERR0 0x00000002 /* Error Interrupt (DMA error 0 interrupt (generic)) */
779 #define IRQ_DMAR0 0x00000004 /* DMAR0 Block (DMAR0 block interrupt) */
780 #define IRQ_DMAR1 0x00000008 /* DMAR1 Block (DMAR1 block interrupt) */
781 #define IRQ_DMAR0_ERR 0x00000010 /* Error Interrupt (DMAR0 overflow error interrupt) */
782 #define IRQ_DMAR1_ERR 0x00000020 /* Error Interrupt (DMAR1 overflow error interrupt) */
783 #define IRQ_PPI_ERR 0x00000040 /* Error Interrupt (PPI error interrupt) */
784 #define IRQ_MAC_ERR 0x00000080 /* Error Interrupt (MAC status interrupt) */
785 #define IRQ_SPORT0_ERR 0x00000100 /* Error Interrupt (SPORT0 status interrupt) */
786 #define IRQ_SPORT1_ERR 0x00000200 /* Error Interrupt (SPORT1 status interrupt) */
787 #define IRQ_PTP_ERR 0x00000400 /* Error Interrupt (PTP error interrupt) */
789 #define IRQ_UART0_ERR 0x00001000 /* Error Interrupt (UART0 status interrupt) */
790 #define IRQ_UART1_ERR 0x00002000 /* Error Interrupt (UART1 status interrupt) */
791 #define IRQ_RTC 0x00004000 /* Real Time Clock Interrupt */
792 #define IRQ_DMA0 0x00008000 /* DMA channel 0 (PPI/NFC) Interrupt */
793 #define IRQ_DMA3 0x00010000 /* DMA Channel 3 (SPORT0 RX) Interrupt */
794 #define IRQ_DMA4 0x00020000 /* DMA Channel 4 (SPORT0 TX) Interrupt */
795 #define IRQ_DMA5 0x00040000 /* DMA Channel 5 (SPORT1 RX) Interrupt */
796 #define IRQ_DMA6 0x00080000 /* DMA Channel 6 (SPORT1 TX) Interrupt */
797 #define IRQ_TWI 0x00100000 /* TWI Interrupt */
798 #define IRQ_DMA7 0x00200000 /* DMA Channel 7 (SPI) Interrupt */
799 #define IRQ_DMA8 0x00400000 /* DMA Channel 8 (UART0 RX) Interrupt */
800 #define IRQ_DMA9 0x00800000 /* DMA Channel 9 (UART0 TX) Interrupt */
801 #define IRQ_DMA10 0x01000000 /* DMA Channel 10 (UART1 RX) Interrupt */
802 #define IRQ_DMA11 0x02000000 /* DMA Channel 11 (UART1 TX) Interrupt */
803 #define IRQ_OTP 0x04000000 /* OTP Interrupt */
804 #define IRQ_CNT 0x08000000 /* GP Counter Interrupt */
805 #define IRQ_DMA1 0x10000000 /* DMA Channel 1 (EthernetRX/HOSTDP) Interrupt */
806 #define IRQ_PFA_PORTH 0x20000000 /* PF Port H Interrupt A */
807 #define IRQ_DMA2 0x40000000 /* DMA Channel 2 (Ethernet TX/NFC) Interrupt */
808 #define IRQ_PFB_PORTH 0x80000000 /* PF Port H Interrupt B */
810 /* Peripheral Masks For SIC_ISR1, SIC_IWR1, SIC_IMASK1 */
811 #define IRQ_TIMER0 0x00000001 /* Timer 0 Interrupt */
812 #define IRQ_TIMER1 0x00000002 /* Timer 1 Interrupt */
813 #define IRQ_TIMER2 0x00000004 /* Timer 2 Interrupt */
814 #define IRQ_TIMER3 0x00000008 /* Timer 3 Interrupt */
815 #define IRQ_TIMER4 0x00000010 /* Timer 4 Interrupt */
816 #define IRQ_TIMER5 0x00000020 /* Timer 5 Interrupt */
817 #define IRQ_TIMER6 0x00000040 /* Timer 6 Interrupt */
818 #define IRQ_TIMER7 0x00000080 /* Timer 7 Interrupt */
819 #define IRQ_PFA_PORTG 0x00000100 /* PF Port G Interrupt A */
820 #define IRQ_PFB_PORTG 0x00000200 /* PF Port G Interrupt B */
821 #define IRQ_DMA12 0x00000400 /* DMA Channels 12 (MDMA0 Destination) TX Interrupt */
822 #define IRQ_DMA13 0x00000400 /* DMA Channels 13 (MDMA0 Source) RX Interrupt */
823 #define IRQ_DMA14 0x00000800 /* DMA Channels 14 (MDMA1 Destination) TX Interrupt */
824 #define IRQ_DMA15 0x00000800 /* DMA Channels 15 (MDMA1 Source) RX Interrupt */
825 #define IRQ_WDOG 0x00001000 /* Software Watchdog Timer Interrupt */
826 #define IRQ_PFA_PORTF 0x00002000 /* PF Port F Interrupt A */
827 #define IRQ_PFB_PORTF 0x00004000 /* PF Port F Interrupt B */
828 #define IRQ_SPI0_ERR 0x00008000 /* Error Interrupt (SPI0 status interrupt) */
829 #define IRQ_SPI1_ERR 0x00010000 /* Error Interrupt (SPI1 status interrupt) */
831 #define IRQ_RSI_INT0 0x00080000 /* USB EINT interrupt */
832 #define IRQ_RSI_INT1 0x00100000 /* USB INT0 interrupt */
833 #define IRQ_PWM_TRIPINT 0x00200000 /* USB INT1 interrupt */
834 #define IRQ_PWM_SYNCINT 0x00400000 /* USB INT1 interrupt */
835 #define IRQ_PTP_STATINT 0x00800000 /* USB DMAINT interrupt */
838 /* Peripheral Masks For SIC_ISR, SIC_IWR, SIC_IMASK */
839 #define IWR_DISABLE_ALL 0x00000000 /* Wakeup Disable all peripherals */
840 #define IWR_ENABLE_ALL 0xFFFFFFFF /* Wakeup Enable all peripherals */
841 /* x = pos 0 to 31, for 32-63 use value-32 */
842 #define IWR_ENABLE(x) (1 << (x)) /* Wakeup Enable Peripheral #x */
843 #define IWR_DISABLE(x) (0xFFFFFFFF^(1<<(x))) /* Wakeup Disable Peripheral #x */
852 #endif /* _MISRA_RULES */
854 /* SIC_IAR0 Macros */
855 #define P0_IVG(x) (((x)&_MF15)-_MF7) /* Peripheral #0 assigned IVG #x */
856 #define P1_IVG(x) ((((x)&_MF15)-_MF7) << 0x4) /* Peripheral #1 assigned IVG #x */
857 #define P2_IVG(x) ((((x)&_MF15)-_MF7) << 0x8) /* Peripheral #2 assigned IVG #x */
858 #define P3_IVG(x) ((((x)&_MF15)-_MF7) << 0xC) /* Peripheral #3 assigned IVG #x */
859 #define P4_IVG(x) ((((x)&_MF15)-_MF7) << 0x10) /* Peripheral #4 assigned IVG #x */
860 #define P5_IVG(x) ((((x)&_MF15)-_MF7) << 0x14) /* Peripheral #5 assigned IVG #x */
861 #define P6_IVG(x) ((((x)&_MF15)-_MF7) << 0x18) /* Peripheral #6 assigned IVG #x */
862 #define P7_IVG(x) ((((x)&_MF15)-_MF7) << 0x1C) /* Peripheral #7 assigned IVG #x */
864 /* SIC_IAR1 Macros */
865 #define P8_IVG(x) (((x)&_MF15)-_MF7) /* Peripheral #8 assigned IVG #x */
866 #define P9_IVG(x) ((((x)&_MF15)-_MF7) << 0x4) /* Peripheral #9 assigned IVG #x */
867 #define P10_IVG(x) ((((x)&_MF15)-_MF7) << 0x8) /* Peripheral #10 assigned IVG #x */
868 #define P11_IVG(x) /* Reserved */
869 #define P12_IVG(x) ((((x)&_MF15)-_MF7) << 0x10) /* Peripheral #12 assigned IVG #x */
870 #define P13_IVG(x) ((((x)&_MF15)-_MF7) << 0x14) /* Peripheral #13 assigned IVG #x */
871 #define P14_IVG(x) ((((x)&_MF15)-_MF7) << 0x18) /* Peripheral #14 assigned IVG #x */
872 #define P15_IVG(x) ((((x)&_MF15)-_MF7) << 0x1C) /* Peripheral #15 assigned IVG #x */
874 /* SIC_IAR2 Macros */
875 #define P16_IVG(x) (((x)&_MF15)-_MF7) /* Peripheral #16 assigned IVG #x */
876 #define P17_IVG(x) ((((x)&_MF15)-_MF7) << 0x4) /* Peripheral #17 assigned IVG #x */
877 #define P18_IVG(x) ((((x)&_MF15)-_MF7) << 0x8) /* Peripheral #18 assigned IVG #x */
878 #define P19_IVG(x) ((((x)&_MF15)-_MF7) << 0xC) /* Peripheral #19 assigned IVG #x */
879 #define P20_IVG(x) ((((x)&_MF15)-_MF7) << 0x10) /* Peripheral #20 assigned IVG #x */
880 #define P21_IVG(x) ((((x)&_MF15)-_MF7) << 0x14) /* Peripheral #21 assigned IVG #x */
881 #define P22_IVG(x) ((((x)&_MF15)-_MF7) << 0x18) /* Peripheral #22 assigned IVG #x */
882 #define P23_IVG(x) ((((x)&_MF15)-_MF7) << 0x1C) /* Peripheral #23 assigned IVG #x */
884 /* SIC_IAR3 Macros */
885 #define P24_IVG(x) (((x)&_MF15)-_MF7) /* Peripheral #24 assigned IVG #x */
886 #define P25_IVG(x) ((((x)&_MF15)-_MF7) << 0x4) /* Peripheral #25 assigned IVG #x */
887 #define P26_IVG(x) ((((x)&_MF15)-_MF7) << 0x8) /* Peripheral #26 assigned IVG #x */
888 #define P27_IVG(x) ((((x)&_MF15)-_MF7) << 0xC) /* Peripheral #27 assigned IVG #x */
889 #define P28_IVG(x) ((((x)&_MF15)-_MF7) << 0x10) /* Peripheral #28 assigned IVG #x */
890 #define P29_IVG(x) ((((x)&_MF15)-_MF7) << 0x14) /* Peripheral #29 assigned IVG #x */
891 #define P30_IVG(x) ((((x)&_MF15)-_MF7) << 0x18) /* Peripheral #30 assigned IVG #x */
892 #define P31_IVG(x) ((((x)&_MF15)-_MF7) << 0x1C) /* Peripheral #31 assigned IVG #x */
894 /* SIC_IAR4 Macros */
895 #define P32_IVG(x) (((x)&_MF15)-_MF7) /* Peripheral #32 assigned IVG #x */
896 #define P33_IVG(x) ((((x)&_MF15)-_MF7) << 0x4) /* Peripheral #33 assigned IVG #x */
897 #define P34_IVG(x) ((((x)&_MF15)-_MF7) << 0x8) /* Peripheral #34 assigned IVG #x */
898 #define P35_IVG(x) ((((x)&_MF15)-_MF7) << 0xC) /* Peripheral #35 assigned IVG #x */
899 #define P36_IVG(x) ((((x)&_MF15)-_MF7) << 0x10) /* Peripheral #36 assigned IVG #x */
900 #define P37_IVG(x) ((((x)&_MF15)-_MF7) << 0x14) /* Peripheral #37 assigned IVG #x */
901 #define P38_IVG(x) ((((x)&_MF15)-_MF7) << 0x18) /* Peripheral #38 assigned IVG #x */
902 #define P39_IVG(x) ((((x)&_MF15)-_MF7) << 0x1C) /* Peripheral #39 assigned IVG #x */
904 /* SIC_IAR5 Macros */
905 #define P40_IVG(x) (((x)&_MF15)-_MF7) /* Peripheral #40 assigned IVG #x */
906 #define P41_IVG(x) ((((x)&_MF15)-_MF7) << 0x4) /* Peripheral #41 assigned IVG #x */
907 #define P42_IVG(x) ((((x)&_MF15)-_MF7) << 0x8) /* Peripheral #42 assigned IVG #x */
908 #define P43_IVG(x) ((((x)&_MF15)-_MF7) << 0xC) /* Peripheral #43 assigned IVG #x */
909 #define P44_IVG(x) ((((x)&_MF15)-_MF7) << 0x10) /* Peripheral #44 assigned IVG #x */
910 #define P45_IVG(x) ((((x)&_MF15)-_MF7) << 0x14) /* Peripheral #45 assigned IVG #x */
911 #define P46_IVG(x) ((((x)&_MF15)-_MF7) << 0x18) /* Peripheral #46 assigned IVG #x */
912 #define P47_IVG(x) ((((x)&_MF15)-_MF7) << 0x1C) /* Peripheral #47 assigned IVG #x */
914 /* SIC_IAR6 Macros */
915 #define P48_IVG(x) (((x)&_MF15)-_MF7) /* Peripheral #48 assigned IVG #x */
916 #define P49_IVG(x) /* Reserved */
917 #define P50_IVG(x) /* Reserved */
918 #define P51_IVG(x) ((((x)&_MF15)-_MF7) << 0xC) /* Peripheral #51 assigned IVG #x */
919 #define P52_IVG(x) ((((x)&_MF15)-_MF7) << 0x10) /* Peripheral #52 assigned IVG #x */
920 #define P53_IVG(x) ((((x)&_MF15)-_MF7) << 0x14) /* Peripheral #53 assigned IVG #x */
921 #define P54_IVG(x) ((((x)&_MF15)-_MF7) << 0x18) /* Peripheral #54 assigned IVG #x */
922 #define P55_IVG(x) ((((x)&_MF15)-_MF7) << 0x1C) /* Peripheral #55 assigned IVG #x */
924 /* SIC_IAR7 Macros */
925 #define P56_IVG(x) /* Reserved */
926 #define P57_IVG(x) /* Reserved */
927 #define P58_IVG(x) /* Reserved */
928 #define P59_IVG(x) /* Reserved */
929 #define P60_IVG(x) /* Reserved */
930 #define P61_IVG(x) /* Reserved */
931 #define P62_IVG(x) /* Reserved */
932 #define P63_IVG(x) /* Reserved */
935 /* SIC_IMASK0 Masks*/
936 #define SIC_UNMASK0_ALL 0x00000000 /* Unmask all peripheral interrupts */
937 #define SIC_MASK0_ALL 0xFFFFF3FF /* Mask all peripheral interrupts */
939 #define SIC_MASK0(x) ((int32_t)1 << ((x)&0x1Fu)) /* Mask Peripheral #x interrupt */
940 #define SIC_UNMASK0(x) (0xFFFFFFFFu ^ ((uint32_t)1 << ((x)&0x1Fu))) /*Unmask Peripheral #x interrupt*/
942 #define SIC_MASK0(x) (1 << ((x)&0x1F)) /* Mask Peripheral #x interrupt */
943 #define SIC_UNMASK0(x) (0xFFFFFFFF ^ (1 << ((x)&0x1F))) /* Unmask Peripheral #x interrupt */
944 #endif /* _MISRA_RULES */
946 /* SIC_IMASK1 Masks*/
947 #define SIC_UNMASK1_ALL 0x00000000 /* Unmask all peripheral interrupts */
948 #define SIC_MASK1_ALL 0xFFFFFF /* Mask all peripheral interrupts */
950 #define SIC_MASK1(x) ((int32_t)1 << ((x)&0x1Fu)) /* Mask Peripheral #x interrupt */
951 #define SIC_UNMASK1(x) (0xFFFFFFFFu ^ ((uint32_t)1 << ((x)&0x1Fu))) /*Unmask Peripheral #x interrupt*/
953 #define SIC_MASK1(x) (1 << ((x)&0x1F)) /* Mask Peripheral #x interrupt */
954 #define SIC_UNMASK1(x) (0xFFFFFFFF ^ (1 << ((x)&0x1F))) /* Unmask Peripheral #x interrupt */
955 #endif /* _MISRA_RULES */
959 #define IWR0_DISABLE_ALL 0x00000000 /* Wakeup Disable all peripherals */
960 #define IWR0_ENABLE_ALL 0xFFFFF3FF /* Wakeup Enable all peripherals */
962 #define IWR0_ENABLE(x) ((int32_t)1 << ((x)&0x1Fu)) /* Wakeup Enable Peripheral #x */
963 #define IWR0_DISABLE(x) (0xFFFFFFFFu ^ ((uint32_t)1 << ((x)&0x1Fu))) /*Wakeup Disable Peripheral #x */
965 #define IWR0_ENABLE(x) (1 << ((x)&0x1F)) /* Wakeup Enable Peripheral #x */
966 #define IWR0_DISABLE(x) (0xFFFFFFFF ^ (1 << ((x)&0x1F))) /* Wakeup Disable Peripheral #x */
967 #endif /* _MISRA_RULES */
970 #define IWR1_DISABLE_ALL 0x00000000 /* Wakeup Disable all peripherals */
971 #define IWR1_ENABLE_ALL 0xFFFFFF /* Wakeup Enable all peripherals */
973 #define IWR1_ENABLE(x) ((int32_t)1 << ((x)&0x1Fu)) /* Wakeup Enable Peripheral #x */
974 #define IWR1_DISABLE(x) (0xFFFFFFFFu ^ ((uint32_t)1 << ((x)&0x1Fu))) /* Wakeup Disable Peripheral #x*/
976 #define IWR1_ENABLE(x) (1 << ((x)&0x1F)) /* Wakeup Enable Peripheral #x */
977 #define IWR1_DISABLE(x) (0xFFFFFFFF ^ (1 << ((x)&0x1F)))/* Wakeup Disable Peripheral #x */
978 #endif /* _MISRA_RULES */
981 /* ************************************** WATCHDOG TIMER MASKS ****************************************************/
983 /* Watchdog Timer WDOG_CTL Register Masks */
985 #define WDEV(x) (((x)<<1) & 0x0006u) /* event generated on roll over */
987 #define WDEV(x) (((x)<<1) & 0x0006) /* event generated on roll over */
988 #endif /* _MISRA_RULES */
990 #define WDEV_RESET 0x0000 /* generate reset event on roll over */
991 #define WDEV_NMI 0x0002 /* generate NMI event on roll over */
992 #define WDEV_GPI 0x0004 /* generate GP IRQ on roll over */
993 #define WDEV_NONE 0x0006 /* no event on roll over */
994 #define WDEN 0x0FF0 /* enable watchdog */
995 #define WDDIS 0x0AD0 /* disable watchdog */
996 #define WDRO 0x8000 /* watchdog rolled over latch */
998 /* depreciated WDOG_CTL Register Masks for legacy code */
1000 #define ENABLE_RESET WDEV_RESET
1001 #define WDOG_RESET WDEV_RESET
1002 #define ENABLE_NMI WDEV_NMI
1003 #define WDOG_NMI WDEV_NMI
1004 #define ENABLE_GPI WDEV_GPI
1005 #define WDOG_GPI WDEV_GPI
1006 #define DISABLE_EVT WDEV_NONE
1007 #define WDOG_NONE WDEV_NONE
1010 #define TMR_DIS WDDIS
1012 #define ICTL_P0 0x01
1013 #define ICTL_P1 0x02
1017 /* ************************************** REAL TIME CLOCK MASKS *************************************************/
1019 /* RTC_STAT and RTC_ALARM Masks*/
1020 #define RTC_SEC 0x0000003F /* Real-Time Clock Seconds */
1021 #define RTC_MIN 0x00000FC0 /* Real-Time Clock Minutes */
1022 #define RTC_HR 0x0001F000 /* Real-Time Clock Hours */
1023 #define RTC_DAY 0xFFFE0000 /* Real-Time Clock Days */
1025 /* RTC_ALARM Macro z=day y=hr x=min w=sec */
1027 #define SET_ALARM(z,y,x,w) ((((z)&0x7FFFu)<<0x11)|(((y)&0x1Fu)<<0xC)|(((x)&0x3Fu)<<0x6)|((w)&0x3Fu))
1029 #define SET_ALARM(z,y,x,w) ((((z)&0x7FFF)<<0x11)|(((y)&0x1F)<<0xC)|(((x)&0x3F)<<0x6)|((w)&0x3F))
1030 #endif /* _MISRA_RULES */
1032 /* RTC_ICTL and RTC_ISTAT Masks*/
1033 #define STOPWATCH 0x0001 /* Stopwatch Interrupt Enable */
1034 #define ALARM 0x0002 /* Alarm Interrupt Enable */
1035 #define SECOND 0x0004 /* Seconds (1 Hz) Interrupt Enable */
1036 #define MINUTE 0x0008 /* Minutes Interrupt Enable */
1037 #define HOUR 0x0010 /* Hours Interrupt Enable */
1038 #define DAY 0x0020 /* 24 Hours (Days) Interrupt Enable */
1039 #define DAY_ALARM 0x0040 /* Day Alarm (Day, Hour, Minute, Second) Interrupt Enable */
1040 #define WRITE_PENDING 0x4000 /* Write Pending Status */
1041 #define WRITE_COMPLETE 0x8000 /* Write Complete Interrupt Enable */
1043 /* RTC_FAST / RTC_PREN Mask */
1044 #define PREN 0x0001 /* Enable Prescaler, RTC Runs @1 Hz */
1047 /* ************************************ UART CONTROLLER MASKS *****************************************************/
1049 /* UARTx_LCR Masks*/
1051 #define WLS(x) (((x)-5u) & 0x03u) /* Word Length Select */
1053 #define WLS(x) (((x)-5) & 0x03) /* Word Length Select */
1054 #endif /* _MISRA_RULES */
1056 #define STB 0x04 /* Stop Bits */
1057 #define PEN 0x08 /* Parity Enable */
1058 #define EPS 0x10 /* Even Parity Select */
1059 #define STP 0x20 /* Stick Parity */
1060 #define SB 0x40 /* Set Break */
1061 #define DLAB 0x80 /* Divisor Latch Access */
1063 /* UARTx_MCR Mask */
1064 #define LOOP_ENA 0x10 /* Loopback Mode Enable */
1065 #define LOOP_ENA_P 0x04
1067 /* UARTx_LSR Masks */
1068 #define DR 0x01 /* Data Ready */
1069 #define OE 0x02 /* Overrun Error */
1070 #define PE 0x04 /* Parity Error */
1071 #define FE 0x08 /* Framing Error */
1072 #define BI 0x10 /* Break Interrupt */
1073 #define THRE 0x20 /* THR Empty */
1074 #define TEMT 0x40 /* TSR and UART_THR Empty */
1076 /* UARTx_IER Masks*/
1077 #define ERBFI 0x01 /* Enable Receive Buffer Full Interrupt */
1078 #define ETBEI 0x02 /* Enable Transmit Buffer Empty Interrupt */
1079 #define ELSI 0x04 /* Enable RX Status Interrupt */
1081 /* UARTx_IIR Masks*/
1082 #define NINT 0x01 /* Pending Interrupt */
1083 #define STATUS 0x06 /* Highest Priority Pending Interrupt */
1085 /* UARTx_GCTL Masks*/
1086 #define UCEN 0x01 /* Enable UARTx Clocks */
1087 #define IREN 0x02 /* Enable IrDA Mode */
1088 #define TPOLC 0x04 /* IrDA TX Polarity Change */
1089 #define RPOLC 0x08 /* IrDA RX Polarity Change */
1090 #define FPE 0x10 /* Force Parity Error On Transmit */
1091 #define FFE 0x20 /* Force Framing Error On Transmit */
1093 /* Bit masks for UART Divisor Latch Registers: UARTx_DLL & UARTx_DLH */
1094 #define UARTDLL 0x00FF /* Divisor Latch Low Byte */
1095 #define UARTDLH 0xFF00 /* Divisor Latch High Byte */
1098 /******************************** SERIAL PERIPHERAL INTERFACE (SPI) MASKS ***************************************/
1101 #define TIMOD 0x0003 /* Transfer Initiate Mode */
1102 #define RDBR_CORE 0x0000 /* RDBR Read Initiates, IRQ When RDBR Full */
1103 #define TDBR_CORE 0x0001 /* TDBR Write Initiates, IRQ When TDBR Empty */
1104 #define RDBR_DMA 0x0002 /* DMA Read, DMA Until FIFO Empty */
1105 #define TDBR_DMA 0x0003 /* DMA Write, DMA Until FIFO Full */
1106 #define SZ 0x0004 /* Send Zero (When TDBR Empty, Send Zero/Last*) */
1107 #define GM 0x0008 /* Get More (When RDBR Full, Overwrite/Discard*) */
1108 #define PSSE 0x0010 /* Slave-Select Input Enable */
1109 #define EMISO 0x0020 /* Enable MISO As Output */
1110 #define SIZE 0x0100 /* Size of Words (16/8* Bits) */
1111 #define LSBF 0x0200 /* LSB First */
1112 #define CPHA 0x0400 /* Clock Phase */
1113 #define CPOL 0x0800 /* Clock Polarity */
1114 #define MSTR 0x1000 /* Master/Slave* */
1115 #define WOM 0x2000 /* Write Open Drain Master */
1116 #define SPE 0x4000 /* SPI Enable */
1119 #define FLS1 0x0002 /* Enables SPI_FLOUT1 as SPI Slave-Select Output */
1120 #define FLS2 0x0004 /* Enables SPI_FLOUT2 as SPI Slave-Select Output */
1121 #define FLS3 0x0008 /* Enables SPI_FLOUT3 as SPI Slave-Select Output */
1122 #define FLS4 0x0010 /* Enables SPI_FLOUT4 as SPI Slave-Select Output */
1123 #define FLS5 0x0020 /* Enables SPI_FLOUT5 as SPI Slave-Select Output */
1124 #define FLS6 0x0040 /* Enables SPI_FLOUT6 as SPI Slave-Select Output */
1125 #define FLS7 0x0080 /* Enables SPI_FLOUT7 as SPI Slave-Select Output */
1126 #define FLG1 0xFDFF /* Activates SPI_FLOUT1 */
1127 #define FLG2 0xFBFF /* Activates SPI_FLOUT2 */
1128 #define FLG3 0xF7FF /* Activates SPI_FLOUT3 */
1129 #define FLG4 0xEFFF /* Activates SPI_FLOUT4 */
1130 #define FLG5 0xDFFF /* Activates SPI_FLOUT5 */
1131 #define FLG6 0xBFFF /* Activates SPI_FLOUT6 */
1132 #define FLG7 0x7FFF /* Activates SPI_FLOUT7 */
1135 #define SPIF 0x0001 /* SPI Finished (Single-Word Transfer Complete) */
1136 #define MODF 0x0002 /* Mode Fault Error (Another Device Tried To Become Master) */
1137 #define TXE 0x0004 /* Transmission Error (Data Sent With No New Data In TDBR) */
1138 #define TXS 0x0008 /* SPI_TDBR Data Buffer Status (Full/Empty*) */
1139 #define RBSY 0x0010 /* Receive Error (Data Received With RDBR Full) */
1140 #define RXS 0x0020 /* SPI_RDBR Data Buffer Status (Full/Empty*) */
1141 #define TXCOL 0x0040 /* Transmit Collision Error (Corrupt Data May Have Been Sent) */
1144 /*********************************** GENERAL PURPOSE TIMER MASKS ************************************************/
1145 /* TIMER_ENABLE Masks*/
1146 #define TIMEN0 0x0001 /* Enable Timer 0 */
1147 #define TIMEN1 0x0002 /* Enable Timer 1 */
1148 #define TIMEN2 0x0004 /* Enable Timer 2 */
1149 #define TIMEN3 0x0008 /* Enable Timer 3 */
1150 #define TIMEN4 0x0010 /* Enable Timer 4 */
1151 #define TIMEN5 0x0020 /* Enable Timer 5 */
1152 #define TIMEN6 0x0040 /* Enable Timer 6 */
1153 #define TIMEN7 0x0080 /* Enable Timer 7 */
1155 /* TIMER_DISABLE Masks*/
1156 #define TIMDIS0 TIMEN0 /* Disable Timer 0 */
1157 #define TIMDIS1 TIMEN1 /* Disable Timer 1 */
1158 #define TIMDIS2 TIMEN2 /* Disable Timer 2 */
1159 #define TIMDIS3 TIMEN3 /* Disable Timer 3 */
1160 #define TIMDIS4 TIMEN4 /* Disable Timer 4 */
1161 #define TIMDIS5 TIMEN5 /* Disable Timer 5 */
1162 #define TIMDIS6 TIMEN6 /* Disable Timer 6 */
1163 #define TIMDIS7 TIMEN7 /* Disable Timer 7 */
1165 /* TIMER_STATUS Masks*/
1166 #define TIMIL0 0x00000001 /* Timer 0 Interrupt */
1167 #define TIMIL1 0x00000002 /* Timer 1 Interrupt */
1168 #define TIMIL2 0x00000004 /* Timer 2 Interrupt */
1169 #define TIMIL3 0x00000008 /* Timer 3 Interrupt */
1170 #define TOVF_ERR0 0x00000010 /* Timer 0 Counter Overflow */
1171 #define TOVF_ERR1 0x00000020 /* Timer 1 Counter Overflow */
1172 #define TOVF_ERR2 0x00000040 /* Timer 2 Counter Overflow */
1173 #define TOVF_ERR3 0x00000080 /* Timer 3 Counter Overflow */
1174 #define TRUN0 0x00001000 /* Timer 0 Slave Enable Status */
1175 #define TRUN1 0x00002000 /* Timer 1 Slave Enable Status */
1176 #define TRUN2 0x00004000 /* Timer 2 Slave Enable Status */
1177 #define TRUN3 0x00008000 /* Timer 3 Slave Enable Status */
1178 #define TIMIL4 0x00010000 /* Timer 4 Interrupt */
1179 #define TIMIL5 0x00020000 /* Timer 5 Interrupt */
1180 #define TIMIL6 0x00040000 /* Timer 6 Interrupt */
1181 #define TIMIL7 0x00080000 /* Timer 7 Interrupt */
1182 #define TOVF_ERR4 0x00100000 /* Timer 4 Counter Overflow */
1183 #define TOVF_ERR5 0x00200000 /* Timer 5 Counter Overflow */
1184 #define TOVF_ERR6 0x00400000 /* Timer 6 Counter Overflow */
1185 #define TOVF_ERR7 0x00800000 /* Timer 7 Counter Overflow */
1186 #define TRUN4 0x10000000 /* Timer 4 Slave Enable Status */
1187 #define TRUN5 0x20000000 /* Timer 5 Slave Enable Status */
1188 #define TRUN6 0x40000000 /* Timer 6 Slave Enable Status */
1189 #define TRUN7 0x80000000 /* Timer 7 Slave Enable Status */
1191 /* Alternate Deprecated Macros Provided For Backwards Code Compatibility */
1192 #define TOVL_ERR0 TOVF_ERR0
1193 #define TOVL_ERR1 TOVF_ERR1
1194 #define TOVL_ERR2 TOVF_ERR2
1195 #define TOVL_ERR3 TOVF_ERR3
1196 #define TOVL_ERR4 TOVF_ERR4
1197 #define TOVL_ERR5 TOVF_ERR5
1198 #define TOVL_ERR6 TOVF_ERR6
1199 #define TOVL_ERR7 TOVF_ERR7
1201 /* TIMERx_CONFIG Masks */
1202 #define PWM_OUT 0x0001 /* Pulse-Width Modulation Output Mode */
1203 #define WDTH_CAP 0x0002 /* Width Capture Input Mode */
1204 #define EXT_CLK 0x0003 /* External Clock Mode */
1205 #define PULSE_HI 0x0004 /* Action Pulse (Positive/Negative*) */
1206 #define PERIOD_CNT 0x0008 /* Period Count */
1207 #define IRQ_ENA 0x0010 /* Interrupt Request Enable */
1208 #define TIN_SEL 0x0020 /* Timer Input Select */
1209 #define OUT_DIS 0x0040 /* Output Pad Disable */
1210 #define CLK_SEL 0x0080 /* Timer Clock Select */
1211 #define TOGGLE_HI 0x0100 /* PWM_OUT PULSE_HI Toggle Mode */
1212 #define EMU_RUN 0x0200 /* Emulation Behavior Select */
1213 #define ERR_TYP 0xC000 /* Error Type */
1216 /* ************************************* GPIO PORTS F, G, H MASKS **********************************************/
1218 /* General Purpose IO (0xFFC00700 - 0xFFC007FF) Masks */
1266 /* ************************************** SERIAL PORT MASKS *****************************************************/
1267 /* SPORTx_TCR1 Masks */
1268 #define TSPEN 0x0001 /* Transmit Enable */
1269 #define ITCLK 0x0002 /* Internal Transmit Clock Select */
1270 #define DTYPE_NORM 0x0004 /* Data Format Normal */
1271 #define DTYPE_ULAW 0x0008 /* Compand Using u-Law */
1272 #define DTYPE_ALAW 0x000C /* Compand Using A-Law */
1273 #define TLSBIT 0x0010 /* Transmit Bit Order */
1274 #define ITFS 0x0200 /* Internal Transmit Frame Sync Select */
1275 #define TFSR 0x0400 /* Transmit Frame Sync Required Select */
1276 #define DITFS 0x0800 /* Data-Independent Transmit Frame Sync Select */
1277 #define LTFS 0x1000 /* Low Transmit Frame Sync Select */
1278 #define LATFS 0x2000 /* Late Transmit Frame Sync Select */
1279 #define TCKFE 0x4000 /* Clock Falling Edge Select */
1281 /* SPORTx_TCR2 Masks and Macro */
1283 #define SLEN(x) ((x)&0x1Fu) /* SPORT TX Word Length (2 - 31) */
1285 #define SLEN(x) ((x)&0x1F) /* SPORT TX Word Length (2 - 31) */
1286 #endif /* _MISRA_RULES */
1288 #define TXSE 0x0100 /* TX Secondary Enable */
1289 #define TSFSE 0x0200 /* Transmit Stereo Frame Sync Enable */
1290 #define TRFST 0x0400 /* Left/Right Order (1 = Right Channel 1st) */
1292 /* SPORTx_RCR1 Masks */
1293 #define RSPEN 0x0001 /* Receive Enable */
1294 #define IRCLK 0x0002 /* Internal Receive Clock Select */
1295 #define DTYPE_NORM 0x0004 /* Data Format Normal */
1296 #define DTYPE_ULAW 0x0008 /* Compand Using u-Law */
1297 #define DTYPE_ALAW 0x000C /* Compand Using A-Law */
1298 #define RLSBIT 0x0010 /* Receive Bit Order */
1299 #define IRFS 0x0200 /* Internal Receive Frame Sync Select */
1300 #define RFSR 0x0400 /* Receive Frame Sync Required Select */
1301 #define LRFS 0x1000 /* Low Receive Frame Sync Select */
1302 #define LARFS 0x2000 /* Late Receive Frame Sync Select */
1303 #define RCKFE 0x4000 /* Clock Falling Edge Select */
1305 /* SPORTx_RCR2 Masks */
1307 #define SLEN(x) ((x)&0x1Fu) /* SPORT RX Word Length (2 - 31) */
1309 #define SLEN(x) ((x)&0x1F) /* SPORT RX Word Length (2 - 31) */
1310 #endif /* _MISRA_RULES */
1312 #define RXSE 0x0100 /* RX Secondary Enable */
1313 #define RSFSE 0x0200 /* RX Stereo Frame Sync Enable */
1314 #define RRFST 0x0400 /* Right-First Data Order */
1316 /* SPORTx_STAT Masks */
1317 #define RXNE 0x0001 /* Receive FIFO Not Empty Status */
1318 #define RUVF 0x0002 /* Sticky Receive Underflow Status */
1319 #define ROVF 0x0004 /* Sticky Receive Overflow Status */
1320 #define TXF 0x0008 /* Transmit FIFO Full Status */
1321 #define TUVF 0x0010 /* Sticky Transmit Underflow Status */
1322 #define TOVF 0x0020 /* Sticky Transmit Overflow Status */
1323 #define TXHRE 0x0040 /* Transmit Hold Register Empty */
1325 /* SPORTx_MCMC1 Macros */
1327 #define WOFF(x) ((x) & 0x3FFu) /* Multichannel Window Offset Field */
1328 /* Only use WSIZE Macro With Logic OR While Setting Lower Order Bits*/
1329 #define WSIZE(x) (((((x)>>0x3)-1u)&0xFu) << 0xC) /* Multichannel Window Size = (x/8)-1 */
1331 #define WOFF(x) ((x) & 0x3FF) /* Multichannel Window Offset Field */
1332 /* Only use WSIZE Macro With Logic OR While Setting Lower Order Bits */
1333 #define WSIZE(x) (((((x)>>0x3)-1)&0xF) << 0xC) /* Multichannel Window Size = (x/8)-1 */
1334 #endif /* _MISRA_RULES */
1336 /* SPORTx_MCMC2 Masks */
1337 #define REC_BYPASS 0x0000 /* Bypass Mode (No Clock Recovery) */
1338 #define REC_2FROM4 0x0002 /* Recover 2 MHz Clock from 4 MHz Clock */
1339 #define REC_8FROM16 0x0003 /* Recover 8 MHz Clock from 16 MHz Clock */
1340 #define MCDTXPE 0x0004 /* Multichannel DMA Transmit Packing */
1341 #define MCDRXPE 0x0008 /* Multichannel DMA Receive Packing */
1342 #define MCMEN 0x0010 /* Multichannel Frame Mode Enable */
1343 #define FSDR 0x0080 /* Multichannel Frame Sync to Data Relationship */
1344 #define MFD_0 0x0000 /* Multichannel Frame Delay = 0 */
1345 #define MFD_1 0x1000 /* Multichannel Frame Delay = 1 */
1346 #define MFD_2 0x2000 /* Multichannel Frame Delay = 2 */
1347 #define MFD_3 0x3000 /* Multichannel Frame Delay = 3 */
1348 #define MFD_4 0x4000 /* Multichannel Frame Delay = 4 */
1349 #define MFD_5 0x5000 /* Multichannel Frame Delay = 5 */
1350 #define MFD_6 0x6000 /* Multichannel Frame Delay = 6 */
1351 #define MFD_7 0x7000 /* Multichannel Frame Delay = 7 */
1352 #define MFD_8 0x8000 /* Multichannel Frame Delay = 8 */
1353 #define MFD_9 0x9000 /* Multichannel Frame Delay = 9 */
1354 #define MFD_10 0xA000 /* Multichannel Frame Delay = 10 */
1355 #define MFD_11 0xB000 /* Multichannel Frame Delay = 11 */
1356 #define MFD_12 0xC000 /* Multichannel Frame Delay = 12 */
1357 #define MFD_13 0xD000 /* Multichannel Frame Delay = 13 */
1358 #define MFD_14 0xE000 /* Multichannel Frame Delay = 14 */
1359 #define MFD_15 0xF000 /* Multichannel Frame Delay = 15 */
1362 /*********************************** ASYNCHRONOUS MEMORY CONTROLLER MASKS ***************************************/
1364 /* EBIU_AMGCTL Masks */
1365 #define AMCKEN 0x0001 /* Enable CLKOUT */
1366 #define AMBEN 0x000e /* Async bank enable */
1367 #define AMBEN_NONE 0x0000 /* All Banks Disabled */
1368 #define AMBEN_B0 0x0002 /* Enable Async Memory Bank 0 only */
1369 #define AMBEN_B0_B1 0x0004 /* Enable Async Memory Banks 0 & 1 only */
1370 #define AMBEN_B0_B1_B2 0x0006 /* Enable Async Memory Banks 0, 1, and 2 */
1371 #define AMBEN_ALL 0x0008 /* Enable Async Memory Banks (all) 0, 1, 2, and 3 */
1372 #define CDPRIO 0x0100 /* DMA has priority over core for for external accesses */
1374 /* EBIU_AMBCTL0 Masks */
1375 #define B0RDYEN 0x00000001 /* Bank 0 (B0) RDY Enable */
1376 #define B0RDYPOL 0x00000002 /* B0 RDY Active High */
1377 #define B0TT_1 0x00000004 /* B0 Transition Time (Read to Write) = 1 cycle */
1378 #define B0TT_2 0x00000008 /* B0 Transition Time (Read to Write) = 2 cycles */
1379 #define B0TT_3 0x0000000C /* B0 Transition Time (Read to Write) = 3 cycles */
1380 #define B0TT_4 0x00000000 /* B0 Transition Time (Read to Write) = 4 cycles */
1381 #define B0ST_1 0x00000010 /* B0 Setup Time (AOE to Read/Write) = 1 cycle */
1382 #define B0ST_2 0x00000020 /* B0 Setup Time (AOE to Read/Write) = 2 cycles */
1383 #define B0ST_3 0x00000030 /* B0 Setup Time (AOE to Read/Write) = 3 cycles */
1384 #define B0ST_4 0x00000000 /* B0 Setup Time (AOE to Read/Write) = 4 cycles */
1385 #define B0HT_1 0x00000040 /* B0 Hold Time (~Read/Write to ~AOE) = 1 cycle */
1386 #define B0HT_2 0x00000080 /* B0 Hold Time (~Read/Write to ~AOE) = 2 cycles */
1387 #define B0HT_3 0x000000C0 /* B0 Hold Time (~Read/Write to ~AOE) = 3 cycles */
1388 #define B0HT_0 0x00000000 /* B0 Hold Time (~Read/Write to ~AOE) = 0 cycles */
1389 #define B0RAT_1 0x00000100 /* B0 Read Access Time = 1 cycle */
1390 #define B0RAT_2 0x00000200 /* B0 Read Access Time = 2 cycles */
1391 #define B0RAT_3 0x00000300 /* B0 Read Access Time = 3 cycles */
1392 #define B0RAT_4 0x00000400 /* B0 Read Access Time = 4 cycles */
1393 #define B0RAT_5 0x00000500 /* B0 Read Access Time = 5 cycles */
1394 #define B0RAT_6 0x00000600 /* B0 Read Access Time = 6 cycles */
1395 #define B0RAT_7 0x00000700 /* B0 Read Access Time = 7 cycles */
1396 #define B0RAT_8 0x00000800 /* B0 Read Access Time = 8 cycles */
1397 #define B0RAT_9 0x00000900 /* B0 Read Access Time = 9 cycles */
1398 #define B0RAT_10 0x00000A00 /* B0 Read Access Time = 10 cycles */
1399 #define B0RAT_11 0x00000B00 /* B0 Read Access Time = 11 cycles */
1400 #define B0RAT_12 0x00000C00 /* B0 Read Access Time = 12 cycles */
1401 #define B0RAT_13 0x00000D00 /* B0 Read Access Time = 13 cycles */
1402 #define B0RAT_14 0x00000E00 /* B0 Read Access Time = 14 cycles */
1403 #define B0RAT_15 0x00000F00 /* B0 Read Access Time = 15 cycles */
1404 #define B0WAT_1 0x00001000 /* B0 Write Access Time = 1 cycle */
1405 #define B0WAT_2 0x00002000 /* B0 Write Access Time = 2 cycles */
1406 #define B0WAT_3 0x00003000 /* B0 Write Access Time = 3 cycles */
1407 #define B0WAT_4 0x00004000 /* B0 Write Access Time = 4 cycles */
1408 #define B0WAT_5 0x00005000 /* B0 Write Access Time = 5 cycles */
1409 #define B0WAT_6 0x00006000 /* B0 Write Access Time = 6 cycles */
1410 #define B0WAT_7 0x00007000 /* B0 Write Access Time = 7 cycles */
1411 #define B0WAT_8 0x00008000 /* B0 Write Access Time = 8 cycles */
1412 #define B0WAT_9 0x00009000 /* B0 Write Access Time = 9 cycles */
1413 #define B0WAT_10 0x0000A000 /* B0 Write Access Time = 10 cycles */
1414 #define B0WAT_11 0x0000B000 /* B0 Write Access Time = 11 cycles */
1415 #define B0WAT_12 0x0000C000 /* B0 Write Access Time = 12 cycles */
1416 #define B0WAT_13 0x0000D000 /* B0 Write Access Time = 13 cycles */
1417 #define B0WAT_14 0x0000E000 /* B0 Write Access Time = 14 cycles */
1418 #define B0WAT_15 0x0000F000 /* B0 Write Access Time = 15 cycles */
1420 #define B1RDYEN 0x00010000 /* Bank 1 (B1) RDY Enable */
1421 #define B1RDYPOL 0x00020000 /* B1 RDY Active High */
1422 #define B1TT_1 0x00040000 /* B1 Transition Time (Read to Write) = 1 cycle */
1423 #define B1TT_2 0x00080000 /* B1 Transition Time (Read to Write) = 2 cycles */
1424 #define B1TT_3 0x000C0000 /* B1 Transition Time (Read to Write) = 3 cycles */
1425 #define B1TT_4 0x00000000 /* B1 Transition Time (Read to Write) = 4 cycles */
1426 #define B1ST_1 0x00100000 /* B1 Setup Time (AOE to Read/Write) = 1 cycle */
1427 #define B1ST_2 0x00200000 /* B1 Setup Time (AOE to Read/Write) = 2 cycles */
1428 #define B1ST_3 0x00300000 /* B1 Setup Time (AOE to Read/Write) = 3 cycles */
1429 #define B1ST_4 0x00000000 /* B1 Setup Time (AOE to Read/Write) = 4 cycles */
1430 #define B1HT_1 0x00400000 /* B1 Hold Time (~Read/Write to ~AOE) = 1 cycle */
1431 #define B1HT_2 0x00800000 /* B1 Hold Time (~Read/Write to ~AOE) = 2 cycles */
1432 #define B1HT_3 0x00C00000 /* B1 Hold Time (~Read/Write to ~AOE) = 3 cycles */
1433 #define B1HT_0 0x00000000 /* B1 Hold Time (~Read/Write to ~AOE) = 0 cycles */
1434 #define B1RAT_1 0x01000000 /* B1 Read Access Time = 1 cycle */
1435 #define B1RAT_2 0x02000000 /* B1 Read Access Time = 2 cycles */
1436 #define B1RAT_3 0x03000000 /* B1 Read Access Time = 3 cycles */
1437 #define B1RAT_4 0x04000000 /* B1 Read Access Time = 4 cycles */
1438 #define B1RAT_5 0x05000000 /* B1 Read Access Time = 5 cycles */
1439 #define B1RAT_6 0x06000000 /* B1 Read Access Time = 6 cycles */
1440 #define B1RAT_7 0x07000000 /* B1 Read Access Time = 7 cycles */
1441 #define B1RAT_8 0x08000000 /* B1 Read Access Time = 8 cycles */
1442 #define B1RAT_9 0x09000000 /* B1 Read Access Time = 9 cycles */
1443 #define B1RAT_10 0x0A000000 /* B1 Read Access Time = 10 cycles */
1444 #define B1RAT_11 0x0B000000 /* B1 Read Access Time = 11 cycles */
1445 #define B1RAT_12 0x0C000000 /* B1 Read Access Time = 12 cycles */
1446 #define B1RAT_13 0x0D000000 /* B1 Read Access Time = 13 cycles */
1447 #define B1RAT_14 0x0E000000 /* B1 Read Access Time = 14 cycles */
1448 #define B1RAT_15 0x0F000000 /* B1 Read Access Time = 15 cycles */
1449 #define B1WAT_1 0x10000000 /* B1 Write Access Time = 1 cycle */
1450 #define B1WAT_2 0x20000000 /* B1 Write Access Time = 2 cycles */
1451 #define B1WAT_3 0x30000000 /* B1 Write Access Time = 3 cycles */
1452 #define B1WAT_4 0x40000000 /* B1 Write Access Time = 4 cycles */
1453 #define B1WAT_5 0x50000000 /* B1 Write Access Time = 5 cycles */
1454 #define B1WAT_6 0x60000000 /* B1 Write Access Time = 6 cycles */
1455 #define B1WAT_7 0x70000000 /* B1 Write Access Time = 7 cycles */
1456 #define B1WAT_8 0x80000000 /* B1 Write Access Time = 8 cycles */
1457 #define B1WAT_9 0x90000000 /* B1 Write Access Time = 9 cycles */
1458 #define B1WAT_10 0xA0000000 /* B1 Write Access Time = 10 cycles */
1459 #define B1WAT_11 0xB0000000 /* B1 Write Access Time = 11 cycles */
1460 #define B1WAT_12 0xC0000000 /* B1 Write Access Time = 12 cycles */
1461 #define B1WAT_13 0xD0000000 /* B1 Write Access Time = 13 cycles */
1462 #define B1WAT_14 0xE0000000 /* B1 Write Access Time = 14 cycles */
1463 #define B1WAT_15 0xF0000000 /* B1 Write Access Time = 15 cycles */
1465 /* EBIU_AMBCTL1 Masks */
1466 #define B2RDYEN 0x00000001 /* Bank 2 (B2) RDY Enable */
1467 #define B2RDYPOL 0x00000002 /* B2 RDY Active High */
1468 #define B2TT_1 0x00000004 /* B2 Transition Time (Read to Write) = 1 cycle */
1469 #define B2TT_2 0x00000008 /* B2 Transition Time (Read to Write) = 2 cycles */
1470 #define B2TT_3 0x0000000C /* B2 Transition Time (Read to Write) = 3 cycles */
1471 #define B2TT_4 0x00000000 /* B2 Transition Time (Read to Write) = 4 cycles */
1472 #define B2ST_1 0x00000010 /* B2 Setup Time (AOE to Read/Write) = 1 cycle */
1473 #define B2ST_2 0x00000020 /* B2 Setup Time (AOE to Read/Write) = 2 cycles */
1474 #define B2ST_3 0x00000030 /* B2 Setup Time (AOE to Read/Write) = 3 cycles */
1475 #define B2ST_4 0x00000000 /* B2 Setup Time (AOE to Read/Write) = 4 cycles */
1476 #define B2HT_1 0x00000040 /* B2 Hold Time (~Read/Write to ~AOE) = 1 cycle */
1477 #define B2HT_2 0x00000080 /* B2 Hold Time (~Read/Write to ~AOE) = 2 cycles */
1478 #define B2HT_3 0x000000C0 /* B2 Hold Time (~Read/Write to ~AOE) = 3 cycles */
1479 #define B2HT_0 0x00000000 /* B2 Hold Time (~Read/Write to ~AOE) = 0 cycles */
1480 #define B2RAT_1 0x00000100 /* B2 Read Access Time = 1 cycle */
1481 #define B2RAT_2 0x00000200 /* B2 Read Access Time = 2 cycles */
1482 #define B2RAT_3 0x00000300 /* B2 Read Access Time = 3 cycles */
1483 #define B2RAT_4 0x00000400 /* B2 Read Access Time = 4 cycles */
1484 #define B2RAT_5 0x00000500 /* B2 Read Access Time = 5 cycles */
1485 #define B2RAT_6 0x00000600 /* B2 Read Access Time = 6 cycles */
1486 #define B2RAT_7 0x00000700 /* B2 Read Access Time = 7 cycles */
1487 #define B2RAT_8 0x00000800 /* B2 Read Access Time = 8 cycles */
1488 #define B2RAT_9 0x00000900 /* B2 Read Access Time = 9 cycles */
1489 #define B2RAT_10 0x00000A00 /* B2 Read Access Time = 10 cycles */
1490 #define B2RAT_11 0x00000B00 /* B2 Read Access Time = 11 cycles */
1491 #define B2RAT_12 0x00000C00 /* B2 Read Access Time = 12 cycles */
1492 #define B2RAT_13 0x00000D00 /* B2 Read Access Time = 13 cycles */
1493 #define B2RAT_14 0x00000E00 /* B2 Read Access Time = 14 cycles */
1494 #define B2RAT_15 0x00000F00 /* B2 Read Access Time = 15 cycles */
1495 #define B2WAT_1 0x00001000 /* B2 Write Access Time = 1 cycle */
1496 #define B2WAT_2 0x00002000 /* B2 Write Access Time = 2 cycles */
1497 #define B2WAT_3 0x00003000 /* B2 Write Access Time = 3 cycles */
1498 #define B2WAT_4 0x00004000 /* B2 Write Access Time = 4 cycles */
1499 #define B2WAT_5 0x00005000 /* B2 Write Access Time = 5 cycles */
1500 #define B2WAT_6 0x00006000 /* B2 Write Access Time = 6 cycles */
1501 #define B2WAT_7 0x00007000 /* B2 Write Access Time = 7 cycles */
1502 #define B2WAT_8 0x00008000 /* B2 Write Access Time = 8 cycles */
1503 #define B2WAT_9 0x00009000 /* B2 Write Access Time = 9 cycles */
1504 #define B2WAT_10 0x0000A000 /* B2 Write Access Time = 10 cycles */
1505 #define B2WAT_11 0x0000B000 /* B2 Write Access Time = 11 cycles */
1506 #define B2WAT_12 0x0000C000 /* B2 Write Access Time = 12 cycles */
1507 #define B2WAT_13 0x0000D000 /* B2 Write Access Time = 13 cycles */
1508 #define B2WAT_14 0x0000E000 /* B2 Write Access Time = 14 cycles */
1509 #define B2WAT_15 0x0000F000 /* B2 Write Access Time = 15 cycles */
1511 #define B3RDYEN 0x00010000 /* Bank 3 (B3) RDY Enable */
1512 #define B3RDYPOL 0x00020000 /* B3 RDY Active High */
1513 #define B3TT_1 0x00040000 /* B3 Transition Time (Read to Write) = 1 cycle */
1514 #define B3TT_2 0x00080000 /* B3 Transition Time (Read to Write) = 2 cycles */
1515 #define B3TT_3 0x000C0000 /* B3 Transition Time (Read to Write) = 3 cycles */
1516 #define B3TT_4 0x00000000 /* B3 Transition Time (Read to Write) = 4 cycles */
1517 #define B3ST_1 0x00100000 /* B3 Setup Time (AOE to Read/Write) = 1 cycle */
1518 #define B3ST_2 0x00200000 /* B3 Setup Time (AOE to Read/Write) = 2 cycles */
1519 #define B3ST_3 0x00300000 /* B3 Setup Time (AOE to Read/Write) = 3 cycles */
1520 #define B3ST_4 0x00000000 /* B3 Setup Time (AOE to Read/Write) = 4 cycles */
1521 #define B3HT_1 0x00400000 /* B3 Hold Time (~Read/Write to ~AOE) = 1 cycle */
1522 #define B3HT_2 0x00800000 /* B3 Hold Time (~Read/Write to ~AOE) = 2 cycles */
1523 #define B3HT_3 0x00C00000 /* B3 Hold Time (~Read/Write to ~AOE) = 3 cycles */
1524 #define B3HT_0 0x00000000 /* B3 Hold Time (~Read/Write to ~AOE) = 0 cycles */
1525 #define B3RAT_1 0x01000000 /* B3 Read Access Time = 1 cycle */
1526 #define B3RAT_2 0x02000000 /* B3 Read Access Time = 2 cycles */
1527 #define B3RAT_3 0x03000000 /* B3 Read Access Time = 3 cycles */
1528 #define B3RAT_4 0x04000000 /* B3 Read Access Time = 4 cycles */
1529 #define B3RAT_5 0x05000000 /* B3 Read Access Time = 5 cycles */
1530 #define B3RAT_6 0x06000000 /* B3 Read Access Time = 6 cycles */
1531 #define B3RAT_7 0x07000000 /* B3 Read Access Time = 7 cycles */
1532 #define B3RAT_8 0x08000000 /* B3 Read Access Time = 8 cycles */
1533 #define B3RAT_9 0x09000000 /* B3 Read Access Time = 9 cycles */
1534 #define B3RAT_10 0x0A000000 /* B3 Read Access Time = 10 cycles */
1535 #define B3RAT_11 0x0B000000 /* B3 Read Access Time = 11 cycles */
1536 #define B3RAT_12 0x0C000000 /* B3 Read Access Time = 12 cycles */
1537 #define B3RAT_13 0x0D000000 /* B3 Read Access Time = 13 cycles */
1538 #define B3RAT_14 0x0E000000 /* B3 Read Access Time = 14 cycles */
1539 #define B3RAT_15 0x0F000000 /* B3 Read Access Time = 15 cycles */
1540 #define B3WAT_1 0x10000000 /* B3 Write Access Time = 1 cycle */
1541 #define B3WAT_2 0x20000000 /* B3 Write Access Time = 2 cycles */
1542 #define B3WAT_3 0x30000000 /* B3 Write Access Time = 3 cycles */
1543 #define B3WAT_4 0x40000000 /* B3 Write Access Time = 4 cycles */
1544 #define B3WAT_5 0x50000000 /* B3 Write Access Time = 5 cycles */
1545 #define B3WAT_6 0x60000000 /* B3 Write Access Time = 6 cycles */
1546 #define B3WAT_7 0x70000000 /* B3 Write Access Time = 7 cycles */
1547 #define B3WAT_8 0x80000000 /* B3 Write Access Time = 8 cycles */
1548 #define B3WAT_9 0x90000000 /* B3 Write Access Time = 9 cycles */
1549 #define B3WAT_10 0xA0000000 /* B3 Write Access Time = 10 cycles */
1550 #define B3WAT_11 0xB0000000 /* B3 Write Access Time = 11 cycles */
1551 #define B3WAT_12 0xC0000000 /* B3 Write Access Time = 12 cycles */
1552 #define B3WAT_13 0xD0000000 /* B3 Write Access Time = 13 cycles */
1553 #define B3WAT_14 0xE0000000 /* B3 Write Access Time = 14 cycles */
1554 #define B3WAT_15 0xF0000000 /* B3 Write Access Time = 15 cycles */
1557 /***************************************** SDRAM CONTROLLER MASKS ***********************************************/
1559 /* EBIU_SDGCTL Masks */
1560 #define CL 0x0000000C /* SDRAM CAS latency */
1561 #define PASR 0x00000030 /* SDRAM partial array self-refresh */
1562 #define TRAS 0x000003C0 /* SDRAM tRAS in SCLK cycles */
1563 #define TRP 0x00003800 /* SDRAM tRP in SCLK cycles */
1564 #define TRCD 0x00030000 /* SDRAM tRCD in SCLK cycles */
1565 #define TWR 0x00180000 /* SDRAM tWR in SCLK cycles */
1567 #define SCTLE 0x00000001 /* Enable SDRAM Signals */
1568 #define CL_2 0x00000008 /* SDRAM CAS Latency = 2 cycles */
1569 #define CL_3 0x0000000C /* SDRAM CAS Latency = 3 cycles */
1570 #define PASR_ALL 0x00000000 /* All 4 SDRAM Banks Refreshed In Self-Refresh */
1571 #define PASR_B0_B1 0x00000010 /* SDRAM Banks 0 and 1 Are Refreshed In Self-Refresh */
1572 #define PASR_B0 0x00000020 /* Only SDRAM Bank 0 Is Refreshed In Self-Refresh */
1573 #define TRAS_1 0x00000040 /* SDRAM tRAS = 1 cycle */
1574 #define TRAS_2 0x00000080 /* SDRAM tRAS = 2 cycles */
1575 #define TRAS_3 0x000000C0 /* SDRAM tRAS = 3 cycles */
1576 #define TRAS_4 0x00000100 /* SDRAM tRAS = 4 cycles */
1577 #define TRAS_5 0x00000140 /* SDRAM tRAS = 5 cycles */
1578 #define TRAS_6 0x00000180 /* SDRAM tRAS = 6 cycles */
1579 #define TRAS_7 0x000001C0 /* SDRAM tRAS = 7 cycles */
1580 #define TRAS_8 0x00000200 /* SDRAM tRAS = 8 cycles */
1581 #define TRAS_9 0x00000240 /* SDRAM tRAS = 9 cycles */
1582 #define TRAS_10 0x00000280 /* SDRAM tRAS = 10 cycles */
1583 #define TRAS_11 0x000002C0 /* SDRAM tRAS = 11 cycles */
1584 #define TRAS_12 0x00000300 /* SDRAM tRAS = 12 cycles */
1585 #define TRAS_13 0x00000340 /* SDRAM tRAS = 13 cycles */
1586 #define TRAS_14 0x00000380 /* SDRAM tRAS = 14 cycles */
1587 #define TRAS_15 0x000003C0 /* SDRAM tRAS = 15 cycles */
1588 #define TRP_1 0x00000800 /* SDRAM tRP = 1 cycle */
1589 #define TRP_2 0x00001000 /* SDRAM tRP = 2 cycles */
1590 #define TRP_3 0x00001800 /* SDRAM tRP = 3 cycles */
1591 #define TRP_4 0x00002000 /* SDRAM tRP = 4 cycles */
1592 #define TRP_5 0x00002800 /* SDRAM tRP = 5 cycles */
1593 #define TRP_6 0x00003000 /* SDRAM tRP = 6 cycles */
1594 #define TRP_7 0x00003800 /* SDRAM tRP = 7 cycles */
1595 #define TRCD_1 0x00008000 /* SDRAM tRCD = 1 cycle */
1596 #define TRCD_2 0x00010000 /* SDRAM tRCD = 2 cycles */
1597 #define TRCD_3 0x00018000 /* SDRAM tRCD = 3 cycles */
1598 #define TRCD_4 0x00020000 /* SDRAM tRCD = 4 cycles */
1599 #define TRCD_5 0x00028000 /* SDRAM tRCD = 5 cycles */
1600 #define TRCD_6 0x00030000 /* SDRAM tRCD = 6 cycles */
1601 #define TRCD_7 0x00038000 /* SDRAM tRCD = 7 cycles */
1602 #define TWR_1 0x00080000 /* SDRAM tWR = 1 cycle */
1603 #define TWR_2 0x00100000 /* SDRAM tWR = 2 cycles */
1604 #define TWR_3 0x00180000 /* SDRAM tWR = 3 cycles */
1605 #define PUPSD 0x00200000 /* Power-Up Start Delay (15 SCLK Cycles Delay) */
1606 #define PSM 0x00400000 /* Power-Up Sequence (Mode Register Before/After* Refresh) */
1607 #define PSS 0x00800000 /* Enable Power-Up Sequence on Next SDRAM Access */
1608 #define SRFS 0x01000000 /* Enable SDRAM Self-Refresh Mode */
1609 #define EBUFE 0x02000000 /* Enable External Buffering Timing */
1610 #define FBBRW 0x04000000 /* Enable Fast Back-To-Back Read To Write */
1611 #define EMREN 0x10000000 /* Extended Mode Register Enable */
1612 #define TCSR 0x20000000 /* Temp-Compensated Self-Refresh Value (85/45* Deg C) */
1613 #define CDDBG 0x40000000 /* Tristate SDRAM Controls During Bus Grant */
1615 /* EBIU_SDBCTL Masks */
1616 #define EBE 0x0001 /* Enable SDRAM External Bank */
1617 #define EBSZ_16 0x0000 /* SDRAM External Bank Size = 16MB */
1618 #define EBSZ_32 0x0002 /* SDRAM External Bank Size = 32MB */
1619 #define EBSZ_64 0x0004 /* SDRAM External Bank Size = 64MB */
1620 #define EBSZ_128 0x0006 /* SDRAM External Bank Size = 128MB */
1621 #define EBCAW_8 0x0000 /* SDRAM External Bank Column Address Width = 8 Bits */
1622 #define EBCAW_9 0x0010 /* SDRAM External Bank Column Address Width = 9 Bits */
1623 #define EBCAW_10 0x0020 /* SDRAM External Bank Column Address Width = 10 Bits */
1624 #define EBCAW_11 0x0030 /* SDRAM External Bank Column Address Width = 11 Bits */
1626 #define EBSZ 0x0006 /* SDRAM external bank size */
1627 #define EBCAW 0x0030 /* SDRAM external bank column address width */
1629 /* EBIU_SDSTAT Masks */
1630 #define SDCI 0x0001 /* SDRAM Controller Idle */
1631 #define SDSRA 0x0002 /* SDRAM Self-Refresh Active */
1632 #define SDPUA 0x0004 /* SDRAM Power-Up Active */
1633 #define SDRS 0x0008 /* SDRAM Will Power-Up On Next Access */
1634 #define SDEASE 0x0010 /* SDRAM EAB Sticky Error Status */
1635 #define BGSTAT 0x0020 /* Bus Grant Status */
1638 /**************************************** DMA CONTROLLER MASKS **************************************************/
1640 /* DMAx_CONFIG, MDMA_yy_CONFIG Masks */
1641 #define DMAEN 0x0001 /* DMA Channel Enable */
1642 #define WNR 0x0002 /* Channel Direction (W/R*) */
1643 #define WDSIZE_8 0x0000 /* Transfer Word Size = 8 */
1644 #define WDSIZE_16 0x0004 /* Transfer Word Size = 16 */
1645 #define WDSIZE_32 0x0008 /* Transfer Word Size = 32 */
1646 #define DMA2D 0x0010 /* DMA Mode (2D/1D*) */
1647 #define SYNC 0x0020 /* DMA Buffer Clear */
1648 #define DI_SEL 0x0040 /* Data Interrupt Timing Select */
1649 #define DI_EN 0x0080 /* Data Interrupt Enable */
1650 #define NDSIZE_0 0x0000 /* Next Descriptor Size = 0 (Stop/Autobuffer) */
1651 #define NDSIZE_1 0x0100 /* Next Descriptor Size = 1 */
1652 #define NDSIZE_2 0x0200 /* Next Descriptor Size = 2 */
1653 #define NDSIZE_3 0x0300 /* Next Descriptor Size = 3 */
1654 #define NDSIZE_4 0x0400 /* Next Descriptor Size = 4 */
1655 #define NDSIZE_5 0x0500 /* Next Descriptor Size = 5 */
1656 #define NDSIZE_6 0x0600 /* Next Descriptor Size = 6 */
1657 #define NDSIZE_7 0x0700 /* Next Descriptor Size = 7 */
1658 #define NDSIZE_8 0x0800 /* Next Descriptor Size = 8 */
1659 #define NDSIZE_9 0x0900 /* Next Descriptor Size = 9 */
1660 #define FLOW_STOP 0x0000 /* Stop Mode */
1661 #define FLOW_AUTO 0x1000 /* Autobuffer Mode */
1662 #define FLOW_ARRAY 0x4000 /* Descriptor Array Mode */
1663 #define FLOW_SMALL 0x6000 /* Small Model Descriptor List Mode */
1664 #define FLOW_LARGE 0x7000 /* Large Model Descriptor List Mode */
1666 /* DMAx_PERIPHERAL_MAP, MDMA_yy_PERIPHERAL_MAP Masks */
1667 #define CTYPE 0x0040 /* DMA Channel Type Indicator (Memory/Peripheral*) */
1668 #define PMAP 0xF000 /* Peripheral Mapped To This Channel */
1669 #define PMAP_PPI 0x0000 /* PPI Port DMA */
1670 #define PMAP_EMACRX 0x1000 /* Ethernet Receive DMA */
1671 #define PMAP_EMACTX 0x2000 /* Ethernet Transmit DMA */
1672 #define PMAP_SPORT0RX 0x3000 /* SPORT0 Receive DMA */
1673 #define PMAP_SPORT0TX 0x4000 /* SPORT0 Transmit DMA */
1674 #define PMAP_RSI 0x4000 /* RSI DMA */
1675 #define PMAP_SPORT1RX 0x5000 /* SPORT1 Receive DMA */
1676 #define PMAP_SPI1 0x5000 /* SPI1 Transmit/Receive DMA */
1677 #define PMAP_SPORT1TX 0x6000 /* SPORT1 Transmit DMA */
1678 #define PMAP_SPI 0x7000 /* SPI DMA */
1679 #define PMAP_SPI0 0x7000 /* SPI0 DMA */
1680 #define PMAP_UART0RX 0x8000 /* UART0 Port Receive DMA */
1681 #define PMAP_UART0TX 0x9000 /* UART0 Port Transmit DMA */
1682 #define PMAP_UART1RX 0xA000 /* UART1 Port Receive DMA */
1683 #define PMAP_UART1TX 0xB000 /* UART1 Port Transmit DMA */
1685 /* DMAx_IRQ_STATUS, MDMA_yy_IRQ_STATUS Masks */
1686 #define DMA_DONE 0x0001 /* DMA Completion Interrupt Status */
1687 #define DMA_ERR 0x0002 /* DMA Error Interrupt Status */
1688 #define DFETCH 0x0004 /* DMA Descriptor Fetch Indicator */
1689 #define DMA_RUN 0x0008 /* DMA Channel Running Indicator */
1692 /********************************* PARALLEL PERIPHERAL INTERFACE (PPI) MASKS *************************************/
1694 /* PPI_CONTROL Masks */
1695 #define PORT_EN 0x0001 /* PPI Port Enable */
1696 #define PORT_DIR 0x0002 /* PPI Port Direction */
1697 #define XFR_TYPE 0x000C /* PPI Transfer Type */
1698 #define PORT_CFG 0x0030 /* PPI Port Configuration */
1699 #define FLD_SEL 0x0040 /* PPI Active Field Select */
1700 #define PACK_EN 0x0080 /* PPI Packing Mode */ /* previous versions of defBF532.h erroneously included DMA32 (PPI 32-bit DMA Enable) */
1701 #define SKIP_EN 0x0200 /* PPI Skip Element Enable */
1702 #define SKIP_EO 0x0400 /* PPI Skip Even/Odd Elements */
1703 #define DLEN_8 0x0000 /* Data Length = 8 Bits */
1704 #define DLEN_10 0x0800 /* Data Length = 10 Bits */
1705 #define DLEN_11 0x1000 /* Data Length = 11 Bits */
1706 #define DLEN_12 0x1800 /* Data Length = 12 Bits */
1707 #define DLEN_13 0x2000 /* Data Length = 13 Bits */
1708 #define DLEN_14 0x2800 /* Data Length = 14 Bits */
1709 #define DLEN_15 0x3000 /* Data Length = 15 Bits */
1710 #define DLEN_16 0x3800 /* Data Length = 16 Bits */
1711 #define POLC 0x4000 /* PPI Clock Polarity */
1712 #define POLS 0x8000 /* PPI Frame Sync Polarity */
1714 /* PPI_STATUS Masks */
1715 #define LT_ERR_OVR 0x0100 /* Line Track Overflow Error */
1716 #define LT_ERR_UNDR 0x0200 /* Line Track Underflow Error */
1717 #define FLD 0x0400 /* Field Indicator */
1718 #define FT_ERR 0x0800 /* Frame Track Error */
1719 #define OVR 0x1000 /* FIFO Overflow Error */
1720 #define UNDR 0x2000 /* FIFO Underrun Error */
1721 #define ERR_DET 0x4000 /* Error Detected Indicator */
1722 #define ERR_NCOR 0x8000 /* Error Not Corrected Indicator */
1725 /*************************************** TWO-WIRE INTERFACE (TWI) MASKS *****************************************/
1727 /* TWI_CLKDIV Macros (Use: *pTWI_CLKDIV = CLKLOW(x)|CLKHI(y); ) */
1729 #define CLKLOW(x) ((x) & 0xFFu)/* Periods Clock Is Held Low */
1730 #define CLKHI(y) (((y)&0xFFu)<<0x8)/* Periods Before New Clock Low */
1732 #define CLKLOW(x) ((x) & 0xFF)/* Periods Clock Is Held Low */
1733 #define CLKHI(y) (((y)&0xFF)<<0x8) /* Periods Before New Clock Low */
1734 #endif /* _MISRA_RULES */
1736 /* TWI_PRESCALE Masks */
1737 #define PRESCALE 0x007F /* SCLKs Per Internal Time Reference (10MHz) */
1738 #define TWI_ENA 0x0080 /* TWI Enable */
1739 #define SCCB 0x0200 /* SCCB Compatibility Enable */
1741 /* TWI_SLAVE_CTRL Masks */
1742 #define SEN 0x0001 /* Slave Enable */
1743 #define SADD_LEN 0x0002 /* Slave Address Length */
1744 #define STDVAL 0x0004 /* Slave Transmit Data Valid */
1745 #define NAK 0x0008 /* NAK/ACK* Generated At Conclusion Of Transfer */
1746 #define GEN 0x0010 /* General Call Adrress Matching Enabled */
1748 /* TWI_SLAVE_STAT Masks */
1749 #define SDIR 0x0001 /* Slave Transfer Direction (Transmit/Receive*) */
1750 #define GCALL 0x0002 /* General Call Indicator */
1752 /* TWI_MASTER_CTRL Masks */
1753 #define MEN 0x0001 /* Master Mode Enable */
1754 #define MADD_LEN 0x0002 /* Master Address Length */
1755 #define MDIR 0x0004 /* Master Transmit Direction (RX/TX*) */
1756 #define FAST 0x0008 /* Use Fast Mode Timing Specs */
1757 #define STOP 0x0010 /* Issue Stop Condition */
1758 #define RSTART 0x0020 /* Repeat Start or Stop* At End Of Transfer */
1759 #define DCNT 0x3FC0 /* Data Bytes To Transfer */
1760 #define SDAOVR 0x4000 /* Serial Data Override */
1761 #define SCLOVR 0x8000 /* Serial Clock Override */
1763 /* TWI_MASTER_STAT Masks */
1764 #define MPROG 0x0001 /* Master Transfer In Progress */
1765 #define LOSTARB 0x0002 /* Lost Arbitration Indicator (Xfer Aborted) */
1766 #define ANAK 0x0004 /* Address Not Acknowledged */
1767 #define DNAK 0x0008 /* Data Not Acknowledged */
1768 #define BUFRDERR 0x0010 /* Buffer Read Error */
1769 #define BUFWRERR 0x0020 /* Buffer Write Error */
1770 #define SDASEN 0x0040 /* Serial Data Sense */
1771 #define SCLSEN 0x0080 /* Serial Clock Sense */
1772 #define BUSBUSY 0x0100 /* Bus Busy Indicator */
1774 /* TWI_INT_SRC and TWI_INT_ENABLE Masks */
1775 #define SINIT 0x0001 /* Slave Transfer Initiated */
1776 #define SCOMP 0x0002 /* Slave Transfer Complete */
1777 #define SERR 0x0004 /* Slave Transfer Error */
1778 #define SOVF 0x0008 /* Slave Overflow */
1779 #define MCOMP 0x0010 /* Master Transfer Complete */
1780 #define MERR 0x0020 /* Master Transfer Error */
1781 #define XMTSERV 0x0040 /* Transmit FIFO Service */
1782 #define RCVSERV 0x0080 /* Receive FIFO Service */
1784 /* TWI_FIFO_CTRL Masks */
1785 #define XMTFLUSH 0x0001 /* Transmit Buffer Flush */
1786 #define RCVFLUSH 0x0002 /* Receive Buffer Flush */
1787 #define XMTINTLEN 0x0004 /* Transmit Buffer Interrupt Length */
1788 #define RCVINTLEN 0x0008 /* Receive Buffer Interrupt Length */
1790 /* TWI_FIFO_STAT Masks */
1791 #define XMTSTAT 0x0003 /* Transmit FIFO Status */
1792 #define XMT_EMPTY 0x0000 /* Transmit FIFO Empty */
1793 #define XMT_HALF 0x0001 /* Transmit FIFO Has 1 Byte To Write */
1794 #define XMT_FULL 0x0003 /* Transmit FIFO Full (2 Bytes To Write) */
1796 #define RCVSTAT 0x000C /* Receive FIFO Status */
1797 #define RCV_EMPTY 0x0000 /* Receive FIFO Empty */
1798 #define RCV_HALF 0x0004 /* Receive FIFO Has 1 Byte To Read */
1799 #define RCV_FULL 0x000C /* Receive FIFO Full (2 Bytes To Read) */
1802 /************************************* PIN CONTROL REGISTER MASKS ***********************************************/
1804 /* PORT_MUX deleted in VisualDSP++ 5.0 Update 3 */
1807 /*********************************** HANDSHAKE DMA (HMDMA) MASKS ************************************************/
1809 /* HMDMAx_CTL Masks */
1810 #define HMDMAEN 0x0001 /* Enable Handshake DMA 0/1 */
1811 #define REP 0x0002 /* HMDMA Request Polarity */
1812 #define UTE 0x0004 /* Urgency Threshold Enable */
1813 #define OIE 0x0010 /* Overflow Interrupt Enable */
1814 #define BDIE 0x0020 /* Block Done Interrupt Enable */
1815 #define MBDI 0x0040 /* Mask Block Done IRQ If Pending ECNT */
1816 #define DRQ 0x0300 /* HMDMA Request Type */
1817 #define DRQ_NONE 0x0000 /* No Request */
1818 #define DRQ_SINGLE 0x0100 /* Channels Request Single */
1819 #define DRQ_MULTI 0x0200 /* Channels Request Multi (Default) */
1820 #define DRQ_URGENT 0x0300 /* Channels Request Multi Urgent */
1821 #define RBC 0x1000 /* Reload BCNT With IBCNT */
1822 #define PS 0x2000 /* HMDMA Pin Status */
1823 #define OI 0x4000 /* Overflow Interrupt Generated */
1824 #define BDI 0x8000 /* Block Done Interrupt Generated */
1826 /* entry addresses of the user-callable Boot ROM functions */
1827 #define _BOOTROM_RESET 0xEF000000
1828 #define _BOOTROM_FINAL_INIT 0xEF000002
1829 #define _BOOTROM_DO_MEMORY_DMA 0xEF000006
1830 #define _BOOTROM_BOOT_DXE_FLASH 0xEF000008
1831 #define _BOOTROM_BOOT_DXE_SPI 0xEF00000A
1832 #define _BOOTROM_BOOT_DXE_TWI 0xEF00000C
1833 #define _BOOTROM_GET_DXE_ADDRESS_FLASH 0xEF000010
1834 #define _BOOTROM_GET_DXE_ADDRESS_SPI 0xEF000012
1835 #define _BOOTROM_GET_DXE_ADDRESS_TWI 0xEF000014
1837 /* Alternate Deprecated Macros Provided For Backwards Code Compatibility */
1838 #define CKELOW SCKELOW
1841 /**************************************** COUNTER MASKS ******************************************************/
1843 /* Bit masks for CNT_CONFIG */
1844 #define CNTE 0x1 /* Counter Enable */
1846 #define DEBE 0x2 /* Debounce Enable */
1848 #define CDGINV 0x10 /* CDG Pin Polarity Invert */
1850 #define CUDINV 0x20 /* CUD Pin Polarity Invert */
1852 #define CZMINV 0x40 /* CZM Pin Polarity Invert */
1854 #define CNTMODE 0x700 /* Counter Operating Mode */
1855 #define ZMZC 0x800 /* CZM Zeroes Counter Enable */
1857 #define BNDMODE 0x3000 /* Boundary register Mode */
1858 #define INPDIS 0x8000 /* CUG and CDG Input Disable */
1861 /* Bit masks for CNT_IMASK */
1862 #define ICIE 0x1 /* Illegal Gray/Binary Code Interrupt Enable */
1864 #define UCIE 0x2 /* Up count Interrupt Enable */
1866 #define DCIE 0x4 /* Down count Interrupt Enable */
1868 #define MINCIE 0x8 /* Min Count Interrupt Enable */
1870 #define MAXCIE 0x10 /* Max Count Interrupt Enable */
1872 #define COV31IE 0x20 /* Bit 31 Overflow Interrupt Enable */
1873 #define nCOV31IE 0x0
1874 #define COV15IE 0x40 /* Bit 15 Overflow Interrupt Enable */
1875 #define nCOV15IE 0x0
1876 #define CZEROIE 0x80 /* Count to Zero Interrupt Enable */
1877 #define nCZEROIE 0x0
1878 #define CZMIE 0x100 /* CZM Pin Interrupt Enable */
1880 #define CZMEIE 0x200 /* CZM Error Interrupt Enable */
1882 #define CZMZIE 0x400 /* CZM Zeroes Counter Interrupt Enable */
1885 /* Bit masks for CNT_STATUS */
1886 #define ICII 0x1 /* Illegal Gray/Binary Code Interrupt Identifier */
1888 #define UCII 0x2 /* Up count Interrupt Identifier */
1890 #define DCII 0x4 /* Down count Interrupt Identifier */
1892 #define MINCII 0x8 /* Min Count Interrupt Identifier */
1894 #define MAXCII 0x10 /* Max Count Interrupt Identifier */
1896 #define COV31II 0x20 /* Bit 31 Overflow Interrupt Identifier */
1897 #define nCOV31II 0x0
1898 #define COV15II 0x40 /* Bit 15 Overflow Interrupt Identifier */
1899 #define nCOV15II 0x0
1900 #define CZEROII 0x80 /* Count to Zero Interrupt Identifier */
1901 #define nCZEROII 0x0
1902 #define CZMII 0x100 /* CZM Pin Interrupt Identifier */
1904 #define CZMEII 0x200 /* CZM Error Interrupt Identifier */
1906 #define CZMZII 0x400 /* CZM Zeroes Counter Interrupt Identifier */
1909 /* Bit masks for CNT_COMMAND */
1910 #define W1LCNT 0xf /* Load Counter Register */
1911 #define W1LMIN 0xf0 /* Load Min Register */
1912 #define W1LMAX 0xf00 /* Load Max Register */
1913 #define W1ZMONCE 0x1000 /* Enable CZM Clear Counter Once */
1914 #define nW1ZMONCE 0x0
1916 /* Bit masks for CNT_DEBOUNCE */
1917 #define DPRESCALE 0xf /* Load Counter Register */
1920 /************************************* SECURITY REGISTER MASKs **************************************************/
1922 /* Bit masks for SECURE_SYSSWT */
1923 #define EMUDABL 0x1 /* Emulation Disable. */
1924 #define nEMUDABL 0x0
1925 #define RSTDABL 0x2 /* Reset Disable */
1926 #define nRSTDABL 0x0
1927 #define L1IDABL 0x1c /* L1 Instruction Memory Disable. */
1928 #define L1DADABL 0xe0 /* L1 Data Bank A Memory Disable. */
1929 #define L1DBDABL 0x700 /* L1 Data Bank B Memory Disable. */
1930 #define DMA0OVR 0x800 /* DMA0 Memory Access Override */
1931 #define nDMA0OVR 0x0
1932 #define DMA1OVR 0x1000 /* DMA1 Memory Access Override */
1933 #define nDMA1OVR 0x0
1934 #define EMUOVR 0x4000 /* Emulation Override */
1936 #define OTPSEN 0x8000 /* OTP Secrets Enable. */
1939 /* Bit masks for SECURE_CONTROL */
1940 #define SECURE0 0x1 /* SECURE 0 */
1941 #define nSECURE0 0x0
1942 #define SECURE1 0x2 /* SECURE 1 */
1943 #define nSECURE1 0x0
1944 #define SECURE2 0x4 /* SECURE 2 */
1945 #define nSECURE2 0x0
1946 #define SECURE3 0x8 /* SECURE 3 */
1947 #define nSECURE3 0x0
1949 /* Bit masks for SECURE_STATUS */
1950 #define SECMODE 0x3 /* Secured Mode Control State */
1951 #define NMI 0x4 /* Non Maskable Interrupt */
1953 #define AFVALID 0x8 /* Authentication Firmware Valid */
1954 #define nAFVALID 0x0
1955 #define AFEXIT 0x10 /* Authentication Firmware Exit */
1957 #define SECSTAT 0xe0 /* Secure Status */
1960 /********************************************** PWM Masks *******************************************************/
1962 /* Bit masks for PWM_CTRL */
1963 #define PWM_EN 0x1 /* PWM Enable */
1964 #define PWM_SYNC_EN 0X2 /* Enable Sync Enable */
1965 #define PWM_DBL 0x4 /* Double Update Mode */
1966 #define PWM_EXTSYNC 0x8 /* External Sync */
1967 #define PWM_SYNCSEL 0x10 /* External Sync Select */
1968 #define PWM_POLARITY 0x20 /* PWM Output Polarity */
1969 #define PWM_SRMODE 0x40 /* PWM SR MODE */
1970 #define PWMTRIPINT_EN 0x80 /* Trip Interrupt Enable */
1971 #define PWMSYNCINT_EN 0x100 /* Sync Interrupt Enable */
1972 #define PWMTRIP_DSBL 0x200 /* Trip Input Disable */
1974 /* Bit masks for PWM_STAT */
1975 #define PWM_PHASE 0x1 /* PWM phase */
1976 #define PWM_POL 0x2 /* PWM polarity */
1977 #define PWM_SR 0x4 /* PWM SR mode */
1978 #define PWM_TRIP 0x8 /* PWM Trip mode */
1979 #define PWM_TRIPINT 0x100 /* PWM Trip Interrupt */
1980 #define PWM_SYNCINT 0x200 /* PWM Sync Interrupt */
1982 /* Bit masks for PWMGATE Register */
1984 #define CHOPHI 0x100 /* Gate Chopping Enable High Side */
1985 #define CHOPLO 0x200 /* Gate Chopping Enable Low Side */
1987 /* Bit masks for PWMSEG Register */
1989 #define CH_EN 0x1 /* CH output Enable */
1990 #define CL_EN 0x2 /* CL output Enable */
1991 #define BH_EN 0x4 /* BH output Enable */
1992 #define BL_EN 0x8 /* BL output Enable */
1993 #define AH_EN 0x10 /* AH output Enable */
1994 #define AL_EN 0x20 /* AL output Enable */
1995 #define CHCL_XOVR 0x40 /* Channel C output Crossover */
1996 #define BHBL_XOVR 0x80 /* Channel B output Crossover */
1997 #define AHAL_XOVR 0x100 /* Channel A output Crossover */
1999 /* Bit masks for PWMLSI Register */
2000 #define PWM_SR_LSI_A 0x1 /* PWM SR Low Side Invert Channel A */
2001 #define PWM_SR_LSI_B 0x2 /* PWM SR Low Side Invert Channel A */
2002 #define PWM_SR_LSI_C 0x4 /* PWM SR Low Side Invert Channel A */
2004 /* Bit masks for PWM_STAT2 Register */
2005 #define PWM_AL 0x1 /* pwm_al output signal for S/W observation */
2006 #define PWM_AH 0x2 /* pwm_ah output signal for S/W observation */
2007 #define PWM_BL 0x4 /* pwm_bl output signal for S/W observation */
2008 #define PWM_BH 0x8 /* pwm_bh output signal for S/W observation */
2009 #define PWM_CL 0x10 /* pwm_cl output signal for S/W observation */
2010 #define PWM_CH 0x20 /* pwm_ch output signal for S/W observation */
2014 #endif /* _MISRA_RULES */
2016 #endif /* _DEF_BF51x_H */
