ros/ametsoc.sty

   1 \ProvidesPackage{ametsoc}
   2
   3 % hacked Jan Mandel Oct 2006
   4
   5 %LaTeX and BibTeX style files for American Meteorological Society publications.
   6 %These are not authorized or approved by the AMS in any way. Use at your own
   7 %risk!
   8 %  (c) Lakshman, National Severe Storms Laboratory
   9 %    http://www.cimms.ou.edu/~lakshman/ametsoc/
  10 % $Id: ametsoc.sty,v 1.1 2017/04/24 20:36:46 jmandel Exp $
  11
  12 % ametsoc.bst is built on top of natbib
  13 \RequirePackage{natbib}
  14
  15 %use Postscript times if available ... it's better looking than computer roman
  16 \usepackage{times}
  17
  18 % Check if user has defined the final option or the conf option
  19 \RequirePackage{ifthen}
  20 \newboolean{final}
  21 \DeclareOption{final}{\setboolean{final}{true}}
  22
  23 \newboolean{conf}
  24 \DeclareOption{conf}{\setboolean{conf}{true}}
  25
  26 \ProcessOptions
  27
  28 % Set up the environment for conference papers
  29 \ifthenelse{\boolean{conf}}%
  30 {\renewcommand\familydefault{\sfdefault}%Helvetica
  31 \setlength{\oddsidemargin}{-0.25in}%wider page
  32 \setlength{\textwidth}{7in}%more text
  33 \usepackage{fix2col}%makes things look better
  34 }
  35 {}
  36
  37 % If we are final, then all the figures and tables should be at the
  38 % end ...
  39 \ifthenelse{\boolean{final}}
  40 %{\usepackage[tablesfirst]{endfloat}%
  41 {\usepackage{endfloat}% put the tables last, not first
  42 \renewcommand{\processdelayedfloats}{{%  Change of the original endfloat
  43   %\def\baselinestretch{1}\normalsize   %<-- do not override setspace ...
  44    \let\figure\@bfig
  45    \let\table\@btab
  46    \processdelayedfloats@hook
  47    \if@tablesfirst \processtables\processfigures
  48    \else \processfigures\processtables \fi
  49    \processotherdelayedfloats}}
  50 }
  51 {}
  52
  53 % Make it do double-spacing for manuscript when you send it out.
  54 % User will have used \usepackage[final]{ametsoc} to get double-spaced text.
  55 \ifthenelse{\boolean{final}}
  56   {\usepackage{setspace} \doublespacing \setstretch{2.0}}
  57   {}
  58
  59 %AMS requires page numbers.
  60 \pagestyle{plain}
  61
  62 \renewcommand\thefootnote{\@fnsymbol\c@footnote}   % use * for footnote
  63
  64 % Article's default is to provide arabic numerals for everything.
  65 % Change the formatting of section and lower to be the way AMS wants them.
  66 % --> \makeatletter  is not needed because this is a package file.
  67 \renewcommand{\@seccntformat}[1]{\bf{\csname the#1\endcsname}.~~}%1. in bold
  68
  69
  70 % subsection ...
  71 \renewcommand{\section}{\@startsection
  72 {section}%
  73 {1}% 2 is the level for section
  74 {0mm}% NO indent, starts immediately
  75 {-\baselineskip}% skips 1 baseline after end of previous subsection
  76 {0.5\baselineskip}% half baseline and the first paragraph starts
  77 {\bf\uppercase}%the style, all italics
  78 }
  79
  80 % subsection ...
  81 \renewcommand{\subsection}{\@startsection
  82 {subsection}%
  83 {2}% 2 is the level for subsection
  84 {0mm}% NO indent, starts immediately
  85 {-\baselineskip}% skips 1 baseline after end of previous subsection
  86 {0.5\baselineskip}% half baseline and the first paragraph starts
  87 %{\normalfont\normalsize\itshape}%the style, all italics
  88 {\bfseries\slshape}
  89 }
  90 \renewcommand{\thesubsection}{\thesection.\arabic{subsection}} % letters
  91
  92 % subsubsection ...
  93 \renewcommand{\subsubsection}{\@startsection
  94 {subsubsection}%
  95 {3}  % 3 is the level for subsubsection
  96 {0mm}% NO indent, starts immediately
  97 {-\baselineskip}% skips 1 baseline after end of previous subsubsection
  98 {-2mm}% text starts on the same line
  99 {\normalfont\normalsize\itshape}%the style, all italics
 100 }
 101 % roman numbers;  because this is run-in, we need a couple of spaces too.
 102 \renewcommand{\thesubsubsection}{\thesubsection.\arabic{subsubsection}}
 103
 104
 105 % Acknowlegments is not a section, but is formatted with run-in headings
 106 \newenvironment{acknowledgement}
 107   {\subsubsection*{\textbf{\emph{Acknowledgement}}}}
 108   {}
 109
 110 \if@titlepage
 111   \renewenvironment{abstract}{%
 112       \titlepage
 113       \null\vfil
 114       \@beginparpenalty\@lowpenalty
 115       \begin{center}%
 116         \bfseries \abstractname
 117         \@endparpenalty\@M
 118       \end{center}}%
 119      {\par\vfil\null\endtitlepage}
 120 \else
 121   \renewenvironment{abstract}{%
 122       \if@twocolumn
 123         \section*{\abstractname}%
 124       \else
 125 %        \small
 126         \begin{center}%
 127           {\bfseries \abstractname\vspace{-.5em}\vspace{\z@}}%
 128         \end{center}%
 129         \quotation
 130       \fi}
 131       {\if@twocolumn\else\endquotation\fi}
 132 \fi
 133
 134 % No date on conference papers
 135 \ifthenelse{\boolean{conf}}
 136 {\date{}}
 137 {}
 138
 139 % Define the amstitle depending on whether we are final or not
 140 \newcommand{\amstitle}{
 141    %\date{}% title page on final should be dated
 142    \maketitle%make the title
 143    \thispagestyle{empty}%title page doesn't have page number ...
 144    \newpage%title page is separate from rest of article
 145    \pagenumbering{arabic}%start numbering from this point ...
 146    \newpage%The AMS wants title page separate from article
 147 }%For final manuscript
 148
 149 \ifthenelse{\boolean{final}}
 150 {}
 151 {\renewcommand{\amstitle}{\maketitle}} %no need for separate pages on non-final
 152
 153 %% citations should be of the form ``author year''  not ``author, year''
 154 \bibpunct{(}{)}{;}{a}{}{,}