make-rules/makemaker.mk

   1
   2 # CDDL HEADER START
   3 #
   4 # The contents of this file are subject to the terms of the
   5 # Common Development and Distribution License (the "License").
   6 # You may not use this file except in compliance with the License.
   7 #
   8 # You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE
   9 # or http://www.opensolaris.org/os/licensing.
  10 # See the License for the specific language governing permissions
  11 # and limitations under the License.
  12 #
  13 # When distributing Covered Code, include this CDDL HEADER in each
  14 # file and include the License file at usr/src/OPENSOLARIS.LICENSE.
  15 # If applicable, add the following below this CDDL HEADER, with the
  16 # fields enclosed by brackets "[]" replaced with your own identifying
  17 # information: Portions Copyright [yyyy] [name of copyright owner]
  18 #
  19 # CDDL HEADER END
  20 #
  21 # Copyright (c) 2011, 2014, Oracle and/or its affiliates. All rights reserved.
  22 #
  23
  24 # Common perl environment
  25 COMMON_PERL_ENV +=      MAKE=$(GMAKE)
  26 COMMON_PERL_ENV +=      PATH=$(dir $(CC)):$(PATH)
  27 COMMON_PERL_ENV +=      LANG=""
  28 COMMON_PERL_ENV +=      CC="$(CC)"
  29 COMMON_PERL_ENV +=      CFLAGS="$(CC_BITS) $(PERL_OPTIMIZE)"
  30
  31 # Particular perl runtime is always required (at least to run Makefile.PL)
  32 PERL_REQUIRED_PACKAGES += runtime/perl
  33
  34 # Yes.  Perl is just scripts, for now, but we need architecture
  35 # directories so that it populates all architecture prototype
  36 # directories.
  37
  38 define perl-version-rule
  39 $(BUILD_DIR)/%-$(1)/.configured:                PERL_VERSION=$(1)
  40 $(BUILD_DIR)/%-$(1)/.built:                     PERL_VERSION=$(1)
  41 $(BUILD_DIR)/%-$(1)/.installed:                 PERL_VERSION=$(1)
  42 $(BUILD_DIR)/%-$(1)/.tested:                    PERL_VERSION=$(1)
  43 $(BUILD_DIR)/%-$(1)/.tested-and-compared:       PERL_VERSION=$(1)
  44
  45 $(BUILD_DIR)/%-$(1)/.depend-build:              PERL_VERSION=$(1)
  46 $(BUILD_DIR)/%-$(1)/.depend-runtime:            PERL_VERSION=$(1)
  47 $(BUILD_DIR)/%-$(1)/.depend-test:               PERL_VERSION=$(1)
  48 endef
  49 $(foreach perlver,$(PERL_VERSIONS),$(eval $(call perl-version-rule,$(perlver))))
  50
  51 $(BUILD_DIR)/$(MACH32)-%/.configured:   BITS=32
  52 $(BUILD_DIR)/$(MACH64)-%/.configured:   BITS=64
  53
  54 $(BUILD_DIR)/$(MACH32)-%/.built:        BITS=32
  55 $(BUILD_DIR)/$(MACH64)-%/.built:        BITS=64
  56
  57 $(BUILD_DIR)/$(MACH32)-%/.installed:    BITS=32
  58 $(BUILD_DIR)/$(MACH64)-%/.installed:    BITS=64
  59
  60 $(BUILD_DIR)/$(MACH32)-%/.tested:       BITS=32
  61 $(BUILD_DIR)/$(MACH64)-%/.tested:       BITS=64
  62
  63 $(BUILD_DIR)/$(MACH32)-%/.tested-and-compared:  BITS=32
  64 $(BUILD_DIR)/$(MACH64)-%/.tested-and-compared:  BITS=64
  65
  66 PERL_32_ONLY_VERSIONS = $(filter-out $(PERL_64_ONLY_VERSIONS), $(PERL_VERSIONS))
  67
  68 BUILD_32 =      $(PERL_32_ONLY_VERSIONS:%=$(BUILD_DIR)/$(MACH32)-%/.built)
  69 BUILD_64 =      $(PERL_64_ONLY_VERSIONS:%=$(BUILD_DIR)/$(MACH64)-%/.built)
  70 BUILD_NO_ARCH = $(PERL_VERSIONS:%=$(BUILD_DIR)/$(MACH)-%/.built)
  71
  72 INSTALL_32 = $(PERL_32_ONLY_VERSIONS:%=$(BUILD_DIR)/$(MACH32)-%/.installed)
  73 INSTALL_64 = $(PERL_64_ONLY_VERSIONS:%=$(BUILD_DIR)/$(MACH64)-%/.installed)
  74 INSTALL_NO_ARCH = $(PERL_VERSIONS:%=$(BUILD_DIR)/$(MACH)-%/.installed)
  75
  76 COMPONENT_CONFIGURE_ENV +=      $(COMMON_PERL_ENV)
  77 # Avoid interactive behaviour for Module::AutoInstall
  78 COMPONENT_CONFIGURE_ENV +=      PERL_AUTOINSTALL=--skipdeps
  79 COMPONENT_CONFIGURE_ENV +=      PERL="$(PERL)"
  80 $(BUILD_DIR)/%/.configured:     $(SOURCE_DIR)/.prep
  81         ($(RM) -r $(@D) ; $(MKDIR) $(@D))
  82         $(ENV) $(CLONEY_ARGS) $(CLONEY) $(SOURCE_DIR) $(@D)
  83         $(COMPONENT_PRE_CONFIGURE_ACTION)
  84         (cd $(@D) ; $(COMPONENT_CONFIGURE_ENV) $(PERL) $(PERL_FLAGS) \
  85                                 Makefile.PL $(CONFIGURE_OPTIONS))
  86         $(COMPONENT_POST_CONFIGURE_ACTION)
  87         $(TOUCH) $@
  88
  89
  90 COMPONENT_BUILD_ENV +=  $(COMMON_PERL_ENV)
  91 $(BUILD_DIR)/%/.built:  $(BUILD_DIR)/%/.configured
  92         $(COMPONENT_PRE_BUILD_ACTION)
  93         (cd $(@D) ; $(ENV) $(COMPONENT_BUILD_ENV) \
  94                 $(GMAKE) $(COMPONENT_BUILD_GMAKE_ARGS) $(COMPONENT_BUILD_ARGS) \
  95                 $(COMPONENT_BUILD_TARGETS))
  96         $(COMPONENT_POST_BUILD_ACTION)
  97         $(TOUCH) $@
  98
  99
 100 COMPONENT_INSTALL_ARGS +=       DESTDIR="$(PROTO_DIR)"
 101 COMPONENT_INSTALL_TARGETS =     install_vendor
 102 COMPONENT_INSTALL_ENV +=        $(COMMON_PERL_ENV)
 103 $(BUILD_DIR)/%/.installed:      $(BUILD_DIR)/%/.built
 104         $(COMPONENT_PRE_INSTALL_ACTION)
 105         (cd $(@D) ; $(ENV) $(COMPONENT_INSTALL_ENV) $(GMAKE) \
 106                         $(COMPONENT_INSTALL_ARGS) $(COMPONENT_INSTALL_TARGETS))
 107         $(COMPONENT_POST_INSTALL_ACTION)
 108         $(TOUCH) $@
 109
 110 # Define Perl version specific filenames for tests.
 111 ifeq ($(strip $(USE_COMMON_TEST_MASTER)),no)
 112 COMPONENT_TEST_MASTER = $(COMPONENT_TEST_RESULTS_DIR)/results-$(PERL_VERSION).master
 113 endif
 114 COMPONENT_TEST_BUILD_DIR = $(BUILD_DIR)/test-$(PERL_VERSION)
 115 COMPONENT_TEST_OUTPUT = $(COMPONENT_TEST_BUILD_DIR)/test-$(PERL_VERSION)-results
 116 COMPONENT_TEST_DIFFS =  $(COMPONENT_TEST_BUILD_DIR)/test-$(PERL_VERSION)-diffs
 117 COMPONENT_TEST_SNAPSHOT = $(COMPONENT_TEST_BUILD_DIR)/results-$(PERL_VERSION).snapshot
 118 COMPONENT_TEST_TRANSFORM_CMD = $(COMPONENT_TEST_BUILD_DIR)/transform-$(PERL_VERSION)-results
 119
 120 # Normalize perl test results.
 121 COMPONENT_TEST_TRANSFORMS += '-e "0,/test_harness/d"'           # delete any lines up through test_harness
 122 COMPONENT_TEST_TRANSFORMS += '-e "s/,  *[0-9]* wallclock.*//"'  # delete timings
 123 COMPONENT_TEST_TRANSFORMS += '-e "/^\#/d"'                      # delete comments
 124 COMPONENT_TEST_TRANSFORMS += '-e "/^make\[/d"'                  # delete make logs
 125
 126 # Add the expected 'test_harness' line if it is missing in the test results.
 127 COMPONENT_POST_TEST_ACTION += \
 128         $(GNU_GREP) -q test_harness $(COMPONENT_TEST_OUTPUT) \
 129         || $(GSED) -i -e '1i\test_harness' $(COMPONENT_TEST_OUTPUT) ;
 130
 131 COMPONENT_TEST_TARGETS =        test
 132 COMPONENT_TEST_ENV +=   $(COMMON_PERL_ENV)
 133
 134 # determine the type of tests we want to run.
 135 ifeq ($(strip $(wildcard $(COMPONENT_TEST_RESULTS_DIR)/results-*.master)),)
 136 TEST_32 =       $(PERL_32_ONLY_VERSIONS:%=$(BUILD_DIR)/$(MACH32)-%/.tested)
 137 TEST_64 =       $(PERL_64_ONLY_VERSIONS:%=$(BUILD_DIR)/$(MACH64)-%/.tested)
 138 TEST_NO_ARCH =  $(PERL_VERSIONS:%=$(BUILD_DIR)/$(MACH)-%/.tested)
 139 else
 140 TEST_32 =       $(PERL_32_ONLY_VERSIONS:%=$(BUILD_DIR)/$(MACH32)-%/.tested-and-compared)
 141 TEST_64 =       $(PERL_64_ONLY_VERSIONS:%=$(BUILD_DIR)/$(MACH64)-%/.tested-and-compared)
 142 TEST_NO_ARCH = $(PERL_VERSIONS:%=$(BUILD_DIR)/$(MACH)-%/.tested-and-compared)
 143 endif
 144
 145 # test the built source
 146 $(BUILD_DIR)/%/.tested-and-compared:    $(COMPONENT_TEST_DEP)
 147         $(RM) -rf $(COMPONENT_TEST_BUILD_DIR)
 148         $(MKDIR) $(COMPONENT_TEST_BUILD_DIR)
 149         $(COMPONENT_PRE_TEST_ACTION)
 150         -(cd $(COMPONENT_TEST_DIR) ; \
 151                 $(COMPONENT_TEST_ENV_CMD) $(COMPONENT_TEST_ENV) \
 152                 $(COMPONENT_TEST_CMD) \
 153                 $(COMPONENT_TEST_ARGS) $(COMPONENT_TEST_TARGETS)) \
 154                 &> $(COMPONENT_TEST_OUTPUT)
 155         $(COMPONENT_POST_TEST_ACTION)
 156         $(COMPONENT_TEST_CREATE_TRANSFORMS)
 157         $(COMPONENT_TEST_PERFORM_TRANSFORM)
 158         $(COMPONENT_TEST_COMPARE)
 159         $(COMPONENT_TEST_CLEANUP)
 160         $(TOUCH) $@
 161
 162 $(BUILD_DIR)/%/.tested:    SHELLOPTS=pipefail
 163 $(BUILD_DIR)/%/.tested:    $(COMPONENT_TEST_DEP)
 164         $(RM) -rf $(COMPONENT_TEST_BUILD_DIR)
 165         $(MKDIR) $(COMPONENT_TEST_BUILD_DIR)
 166         $(COMPONENT_PRE_TEST_ACTION)
 167         (cd $(COMPONENT_TEST_DIR) ; \
 168                 $(COMPONENT_TEST_ENV_CMD) $(COMPONENT_TEST_ENV) \
 169                 $(COMPONENT_TEST_CMD) \
 170                 $(COMPONENT_TEST_ARGS) $(COMPONENT_TEST_TARGETS)) \
 171                 |& $(TEE) $(COMPONENT_TEST_OUTPUT)
 172         $(COMPONENT_POST_TEST_ACTION)
 173         $(COMPONENT_TEST_CREATE_TRANSFORMS)
 174         $(COMPONENT_TEST_PERFORM_TRANSFORM)
 175         $(COMPONENT_TEST_CLEANUP)
 176         $(TOUCH) $@
 177
 178
 179 # We need to add -$(PLV) to package fmri and add runtime dependencies from metadata to generated manifest
 180 GENERATE_EXTRA_DEPS += $(BUILD_DIR)/META.depend-runtime.res
 181 GENERATE_EXTRA_CMD += | \
 182         $(GSED) -e 's/^\(set name=pkg.fmri [^@]*\)\(.*\)$$/\1-$$(PLV)\2/' | \
 183         $(CAT) - <( \
 184                 echo "" ; \
 185                 echo "\# perl modules are unusable without perl runtime binary" ; \
 186                 echo "depend type=require fmri=__TBD pkg.debug.depend.file=perl \\" ; \
 187                 echo "    pkg.debug.depend.path=usr/perl5/\$$(PERLVER)/bin" ; \
 188                 echo "" ; \
 189                 echo "\# Automatically generated dependencies based on distribution metadata" ; \
 190                 $(CAT) $(BUILD_DIR)/META.depend-runtime.res $(MANGLE_DEPEND_RUNTIME) | $(PKGFMT) \
 191         )
 192
 193 # Add build dependencies from metadata to REQUIRED_PACKAGES.
 194 REQUIRED_PACKAGES_RESOLVED += $(BUILD_DIR)/META.depend-build.res
 195
 196 # Generate list of TEST_REQUIRED_PACKAGES entries
 197 REQUIRED_PACKAGES_EXTRA_DEPS += $(BUILD_DIR)/META.depend-test.required
 198 $(BUILD_DIR)/META.depend-test.required: $(BUILD_DIR)/META.depend-test.res
 199         $(GSED) -e 's|^depend.*pkg:/\(library/perl-5/.*\)-\$$(PLV).*$$|TEST_REQUIRED_PACKAGES.perl += \1|' \
 200                 -e '/^TEST_REQUIRED_PACKAGES\.perl/!s/.*/\# TODO: &/' < $< > $@
 201
 202 # Add META.depend-test.required to the generated list of REQUIRED_PACKAGES
 203 REQUIRED_PACKAGES_TRANSFORM += -e '$$r $(BUILD_DIR)/META.depend-test.required'
 204
 205
 206 # The configure target should create the MYMETA.json file.  If it does not we
 207 # need a fallback to use either META.json or META.yml.  We probably (and
 208 # hopefully) currently have no component requiring such fallback.
 209 $(BUILD_DIR)/%/MYMETA.json:     $(BUILD_DIR)/%/.configured
 210         if [ ! -f $@ ] ; then \
 211                 if [ -e $(@D)/META.json ] ; then \
 212                         $(CAT) $(@D)/META.json ; \
 213                 elif [ -e $(@D)/META.yml ] ; then \
 214                         $(CAT) $(@D)/META.yml \
 215                                 | $(PYTHON) -c 'import sys, yaml, json; y=yaml.safe_load(sys.stdin.read()); print(json.dumps(y))' \
 216                                 | $(JQ) '{prereqs:{configure:{requires:.configure_requires},build:{requires:.build_requires},runtime:{requires}}}' ; \
 217                 fi > $@ ; \
 218         fi ; \
 219         $(TOUCH) $@
 220
 221 $(BUILD_DIR)/%/.depend-build:   $(BUILD_DIR)/%/MYMETA.json
 222         $(WS_TOOLS)/perl-meta-deps $(WS_MACH) $(BUILD_DIR) configure build $(PERL_VERSION) < $< > $@
 223         # Get configure requirements from META.json/META.yml too
 224         if [ -e $(@D)/META.json ] ; then \
 225                 $(CAT) $(@D)/META.json ; \
 226         elif [ -e $(@D)/META.yml ] ; then \
 227                 $(CAT) $(@D)/META.yml \
 228                         | $(PYTHON) -c 'import sys, yaml, json; y=yaml.safe_load(sys.stdin.read()); print(json.dumps(y))' \
 229                         | $(JQ) '{prereqs:{configure:{requires:.configure_requires},build:{requires:.build_requires},runtime:{requires}}}' ; \
 230         fi | $(WS_TOOLS)/perl-meta-deps $(WS_MACH) $(BUILD_DIR) configure $(PERL_VERSION) >> $@ ; \
 231         $(TOUCH) $@
 232 $(BUILD_DIR)/%/.depend-runtime: $(BUILD_DIR)/%/MYMETA.json
 233         $(WS_TOOLS)/perl-meta-deps $(WS_MACH) $(BUILD_DIR) runtime $(PERL_VERSION) < $< > $@
 234 $(BUILD_DIR)/%/.depend-test:    $(BUILD_DIR)/%/MYMETA.json
 235         $(WS_TOOLS)/perl-meta-deps $(WS_MACH) $(BUILD_DIR) test $(PERL_VERSION) < $< > $@
 236         $(WS_TOOLS)/perl-meta-deps $(WS_MACH) $(BUILD_DIR) test runtime suggests $(PERL_VERSION) < $< >> $@
 237
 238 $(BUILD_DIR)/META.depend-build.res:     $(BUILD_$(MK_BITS):%.built=%.depend-build)
 239         $(CAT) $^ | $(SORT) -u > $@
 240 $(BUILD_DIR)/META.depend-runtime.res:   $(BUILD_$(MK_BITS):%.built=%.depend-runtime)
 241         $(CAT) $^ | $(SORT) -u > $@
 242 $(BUILD_DIR)/META.depend-test.res:      $(BUILD_$(MK_BITS):%.built=%.depend-test)
 243         $(CAT) $^ | $(SORT) -u > $@
 244
 245 # jq is needed for perl-meta-deps and to convert META.yml to JSON format
 246 USERLAND_REQUIRED_PACKAGES += text/jq
 247 # pyyaml is needed to convert META.yml to MYMETA.json
 248 USERLAND_REQUIRED_PACKAGES += library/python/pyyaml
 249
 250
 251 clean::
 252         $(RM) -r $(BUILD_DIR) $(PROTO_DIR)