odk/examples/DevelopersGuide/Drawing/ControlAndSelectDemo.java

   1 /*************************************************************************
   2  *
   3  *  $RCSfile: ControlAndSelectDemo.java,v $
   4  *
   5  *  $Revision: 1.5 $
   6  *
   7  *  last change: $Author: rt $ $Date: 2005-01-31 16:21:17 $
   8  *
   9  *  The Contents of this file are made available subject to the terms of
  10  *  the BSD license.
  11  *
  12  *  Copyright (c) 2003 by Sun Microsystems, Inc.
  13  *  All rights reserved.
  14  *
  15  *  Redistribution and use in source and binary forms, with or without
  16  *  modification, are permitted provided that the following conditions
  17  *  are met:
  18  *  1. Redistributions of source code must retain the above copyright
  19  *     notice, this list of conditions and the following disclaimer.
  20  *  2. Redistributions in binary form must reproduce the above copyright
  21  *     notice, this list of conditions and the following disclaimer in the
  22  *     documentation and/or other materials provided with the distribution.
  23  *  3. Neither the name of Sun Microsystems, Inc. nor the names of its
  24  *     contributors may be used to endorse or promote products derived
  25  *     from this software without specific prior written permission.
  26  *
  27  *  THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
  28  *  "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
  29  *  LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
  30  *  FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
  31  *  COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
  32  *  INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
  33  *  BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
  34  *  OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
  35  *  ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR
  36  *  TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE
  37  *  USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
  38  *
  39  *************************************************************************/
  40
  41 // __________ Imports __________
  42
  43 import com.sun.star.uno.UnoRuntime;
  44 import com.sun.star.lang.XComponent;
  45 import com.sun.star.lang.XMultiServiceFactory;
  46
  47 import com.sun.star.awt.Point;
  48 import com.sun.star.awt.Size;
  49 import com.sun.star.awt.XControlModel;
  50
  51 import com.sun.star.beans.PropertyValue;
  52
  53 import com.sun.star.drawing.XShape;
  54 import com.sun.star.drawing.XShapes;
  55 import com.sun.star.drawing.XControlShape;
  56 import com.sun.star.drawing.XDrawPage;
  57 import com.sun.star.drawing.XDrawPages;
  58 import com.sun.star.drawing.XDrawPagesSupplier;
  59
  60 import com.sun.star.frame.XModel;
  61 import com.sun.star.frame.XController;
  62
  63 import com.sun.star.view.XSelectionSupplier;
  64
  65
  66 // __________ Implementation __________
  67
  68 /** ControlAndSelectDemo
  69     @author Sven Jacobi
  70
  71    A (GroupBox) ControlShape will be created.
  72    Finally the ControlShape will be inserted into a selection.
  73 */
  74
  75 public class ControlAndSelectDemo
  76 {
  77     public static void main( String args[] )
  78     {
  79         XComponent xComponent = null;
  80         try
  81         {
  82             // get the remote office context of a running office (a new office
  83             // instance is started if necessary)
  84             com.sun.star.uno.XComponentContext xOfficeContext = Helper.connect();
  85
  86             // suppress Presentation Autopilot when opening the document
  87             // properties are the same as described for
  88             // com.sun.star.document.MediaDescriptor
  89             PropertyValue[] pPropValues = new PropertyValue[ 1 ];
  90             pPropValues[ 0 ] = new PropertyValue();
  91             pPropValues[ 0 ].Name = "Silent";
  92             pPropValues[ 0 ].Value = new Boolean( true );
  93
  94             xComponent = Helper.createDocument( xOfficeContext,
  95                 "private:factory/sdraw", "_blank", 0, pPropValues );
  96
  97             XMultiServiceFactory xFactory =
  98                 (XMultiServiceFactory )UnoRuntime.queryInterface(
  99                     XMultiServiceFactory.class, xComponent );
 100
 101             XDrawPagesSupplier xDrawPagesSupplier =
 102                 (XDrawPagesSupplier)UnoRuntime.queryInterface(
 103                     XDrawPagesSupplier.class, xComponent );
 104             XDrawPages xDrawPages = xDrawPagesSupplier.getDrawPages();
 105             XDrawPage xDrawPage = (XDrawPage)UnoRuntime.queryInterface(
 106                 XDrawPage.class, xDrawPages.getByIndex( 0 ));
 107             XShapes xShapes = (XShapes)UnoRuntime.queryInterface(XShapes.class,
 108                                                                  xDrawPage );
 109
 110
 111             // create and insert the ControlShape
 112             Object xObj = xFactory.createInstance(
 113                 "com.sun.star.drawing.ControlShape" );
 114             XShape xShape = (XShape)UnoRuntime.queryInterface( XShape.class, xObj );
 115             xShape.setPosition( new Point( 1000, 1000 ) );
 116             xShape.setSize( new Size( 2000, 2000 ) );
 117             xShapes.add( xShape );
 118
 119             // create and set the control
 120             XControlModel xControlModel = (XControlModel)UnoRuntime.queryInterface(
 121                 XControlModel.class,
 122                 xFactory.createInstance( "com.sun.star.form.component.GroupBox" ) );
 123             XControlShape xControlShape = (XControlShape)UnoRuntime.queryInterface(
 124                 XControlShape.class, xShape );
 125             xControlShape.setControl( xControlModel );
 126
 127
 128             // the following code will demonstrate how to
 129             // make a selection that contains our new created ControlShape
 130             XModel xModel = (XModel)UnoRuntime.queryInterface( XModel.class,
 131                                                                xComponent );
 132             XController xController = xModel.getCurrentController();
 133             XSelectionSupplier xSelectionSupplier =(XSelectionSupplier)
 134                 UnoRuntime.queryInterface( XSelectionSupplier.class, xController );
 135             // take care to use the global service factory only and not the one
 136             // that is provided by the component if you create the ShapeColletion
 137             XShapes xSelection = (XShapes)UnoRuntime.queryInterface( XShapes.class,
 138                 xOfficeContext.getServiceManager().createInstanceWithContext(
 139                     "com.sun.star.drawing.ShapeCollection", xOfficeContext ) );
 140             xSelection.add( xShape );
 141             xSelectionSupplier.select( xSelection );
 142         }
 143         catch( java.lang.Exception ex )
 144         {
 145             System.out.println( ex );
 146         }
 147         System.exit( 0 );
 148     }
 149 }