| blob | 457246fe3da2f2c588e2e2867aa9b4a292a74a97 |
1 *PPD-Adobe: "4.2"\r
2 *% Adobe PostScript(R) Printer Description File\r
3 *% For Lexmark Optra N Laser Printer\r
4 *% Produced by Lexmark International, Inc.\r
5 *%\r
6 *% Copyright (c) 1993-1998 Lexmark International Inc. All Rights Reserved.\r
7 *% Permission is granted for redistribution of this file as\r
8 *% long as this copyright notice is intact and the content\r
9 *% of the file is not altered in any way from its original form.\r
10 *%\r
11 *%\r
12 *% WARNING: If you want to edit this PPD file and use it with Aldus\r
13 *% PageMaker, be sure to use an editor (such as DOS Edit)\r
14 *% that does NOT add an end-of-file marker (hex 1A) when\r
15 *% it stores the file.\r
16 *%\r
17 *%\r
18 *%\r
19 \r
20 *FormatVersion: "4.2"\r
21 *FileVersion: "1.1"\r
22 *LanguageVersion: English\r
23 *LanguageEncoding: WindowsANSI\r
24 *PCFileName: "LOPTRAN.PPD"\r
25 *Product: "(Lexmark Optra N Laser Printer)"\r
26 *PSVersion: ""\r
27 *ModelName: "Lexmark Optra N Laser Printer"\r
28 *ShortNickName: "Lexmark Optra N PS"\r
29 *NickName: "Lexmark Optra N PS"\r
30 \r
31 *% === Options and Constraints ============\r
32 \r
33 *OpenGroup: InstallableOptions/Options Installed\r
34 *OpenUI *Option1/Paper Input Drawer - Option: Boolean\r
35 *DefaultOption1: False\r
36 *Option1 True/Installed: ""\r
37 *Option1 False/Not Installed: ""\r
38 *CloseUI: *Option1\r
39 \r
40 *OpenUI *Option2/Envelope Feeder - Option: Boolean\r
41 *DefaultOption2: False\r
42 *Option2 True/Installed: ""\r
43 *Option2 False/Not Installed: ""\r
44 *CloseUI: *Option2\r
45 \r
46 *OpenUI *Option3/Finisher - Option: Boolean\r
47 *DefaultOption3: False\r
48 *Option3 True/Installed: ""\r
49 *Option3 False/Not Installed: ""\r
50 *CloseUI: *Option3\r
51 \r
52 *OpenUI *Option4/Duplex - Option: Boolean\r
53 *DefaultOption4: False\r
54 *Option4 True/Installed: ""\r
55 *Option4 False/Not Installed: ""\r
56 *CloseUI: *Option4\r
57 \r
58 *OpenUI *Option5/Flash Memory Card - Option: Boolean\r
59 *DefaultOption5: False\r
60 *Option5 False/Not Installed: ""\r
61 *Option5 True/Installed: ""\r
62 *CloseUI: *Option5\r
63 \r
64 *OpenUI *Option6/Printer Hard Disk - Option: Boolean\r
65 *DefaultOption6: False\r
66 *Option6 False/Not Installed: ""\r
67 *Option6 True/Installed: ""\r
68 *CloseUI: *Option6\r
69 \r
70 *OpenUI *InstalledMemory/Printer Memory - Option: PickOne\r
71 *DefaultInstalledMemory: 4Meg\r
72 *InstalledMemory 4Meg/4 MB Printer Memory: ""\r
73 *InstalledMemory 6Meg/6 MB Printer Memory: ""\r
74 *InstalledMemory 8Meg/8 MB Printer Memory: ""\r
75 *InstalledMemory 10Meg/10 MB Printer Memory: ""\r
76 *InstalledMemory 12Meg/12 MB Printer Memory: ""\r
77 *InstalledMemory 16Meg/16 MB Printer Memory: ""\r
78 *InstalledMemory 18Meg/18 MB Printer Memory: ""\r
79 *InstalledMemory 20Meg/20 MB Printer Memory: ""\r
80 *InstalledMemory 24Meg/24 MB Printer Memory: ""\r
81 *InstalledMemory 32Meg/32 or more MB Printer Memory: ""\r
82 *CloseUI: *InstalledMemory\r
83 \r
84 *CloseGroup: InstallableOptions\r
85 *% === User Constraints ============\r
86 \r
87 *% If Input Deck is not installed then do not show as input source\r
88 *UIConstraints: *Option1 False *InputSlot Tray3\r
89 *UIConstraints: *Option1 False *TraySwitch Tray23\r
90 *UIConstraints: *Option1 False *TraySwitch Tray123\r
91 \r
92 *% If Envelope feeder is not installed then do not show as input source\r
93 *UIConstraints: *Option2 False *InputSlot Feeder\r
94 \r
95 *UIConstraints: *Option3 False *StapleLocation Staple1\r
96 *UIConstraints: *Option3 False *StapleLocation Staple2\r
97 *UIConstraints: *OutputBin Bin0 *StapleLocation Staple1\r
98 *UIConstraints: *OutputBin Bin0 *StapleLocation Staple2\r
99 \r
100 *% If Duplex is not installed then inhibit:\r
101 *UIConstraints: *Option4 False *Duplex\r
102 \r
103 *% If Flash is not installed then inhibit:\r
104 *UIConstraints: *Option5 None *Flash\r
105 \r
106 *% If HardDisk is not installed then inhibit:\r
107 *UIConstraints: *Option6 False *HardDisk\r
108 \r
109 *% If the paper source is Tray1 exclude the following paper sizes:\r
110 *UIConstraints: *InputSlot Tray1 *PageSize B5\r
111 *UIConstraints: *InputSlot Tray1 *PageSize Executive\r
112 *UIConstraints: *InputSlot Tray1 *PageSize A5\r
113 *UIConstraints: *InputSlot Tray1 *PageSize Monarch\r
114 *UIConstraints: *InputSlot Tray1 *PageSize C4\r
115 *UIConstraints: *InputSlot Tray1 *PageSize Comm10\r
116 *UIConstraints: *InputSlot Tray1 *PageSize DL\r
117 *UIConstraints: *InputSlot Tray1 *PageSize C5\r
118 *UIConstraints: *InputSlot Tray1 *PageSize ISOB5\r
119 *UIConstraints: *InputSlot Tray1 *PageSize C3\r
120 *UIConstraints: *InputSlot Tray1 *PageSize Tabloid\r
121 *UIConstraints: *InputSlot Tray1 *PageSize Universal\r
122 *UIConstraints: *InputSlot Tray1 *PageSize A3\r
123 \r
124 *% If the paper source is Tray2 exclude the following paper sizes:\r
125 *UIConstraints: *InputSlot Tray2 *PageSize B5\r
126 *UIConstraints: *InputSlot Tray2 *PageSize Executive\r
127 *UIConstraints: *InputSlot Tray2 *PageSize A5\r
128 *UIConstraints: *InputSlot Tray2 *PageSize Monarch\r
129 *UIConstraints: *InputSlot Tray2 *PageSize C4\r
130 *UIConstraints: *InputSlot Tray2 *PageSize Comm10\r
131 *UIConstraints: *InputSlot Tray2 *PageSize DL\r
132 *UIConstraints: *InputSlot Tray2 *PageSize C5\r
133 *UIConstraints: *InputSlot Tray2 *PageSize ISOB5\r
134 *UIConstraints: *InputSlot Tray2 *PageSize C3\r
135 *UIConstraints: *InputSlot Tray2 *PageSize Universal\r
136 \r
137 *% If the paper source is Tray3 exclude the following paper sizes:\r
138 *UIConstraints: *InputSlot Tray3 *PageSize B5\r
139 *UIConstraints: *InputSlot Tray3 *PageSize Executive\r
140 *UIConstraints: *InputSlot Tray3 *PageSize A5\r
141 *UIConstraints: *InputSlot Tray3 *PageSize Monarch\r
142 *UIConstraints: *InputSlot Tray3 *PageSize C4\r
143 *UIConstraints: *InputSlot Tray3 *PageSize Comm10\r
144 *UIConstraints: *InputSlot Tray3 *PageSize DL\r
145 *UIConstraints: *InputSlot Tray3 *PageSize C5\r
146 *UIConstraints: *InputSlot Tray3 *PageSize ISOB5\r
147 *UIConstraints: *InputSlot Tray3 *PageSize C3\r
148 *UIConstraints: *InputSlot Tray3 *PageSize Universal\r
149 \r
150 *% If the paper source is Envelope Feeder exclude the following paper sizes:\r
151 *UIConstraints: *InputSlot Feeder *PageSize Letter\r
152 *UIConstraints: *InputSlot Feeder *PageSize Legal\r
153 *UIConstraints: *InputSlot Feeder *PageSize Executive\r
154 *UIConstraints: *InputSlot Feeder *PageSize A4\r
155 *UIConstraints: *InputSlot Feeder *PageSize A5\r
156 *UIConstraints: *InputSlot Feeder *PageSize B4\r
157 *UIConstraints: *InputSlot Feeder *PageSize B5\r
158 *UIConstraints: *InputSlot Feeder *PageSize A3\r
159 *UIConstraints: *InputSlot Feeder *PageSize Tabloid\r
160 *UIConstraints: *InputSlot Feeder *PageSize Universal\r
161 *UIConstraints: *InputSlot Feeder *PageSize C3\r
162 \r
163 *% If the paper source is Manual Envelope exclude the following paper sizes:\r
164 *UIConstraints: *InputSlot ManualEnvelope *PageSize Letter\r
165 *UIConstraints: *InputSlot ManualEnvelope *PageSize Legal\r
166 *UIConstraints: *InputSlot ManualEnvelope *PageSize Executive\r
167 *UIConstraints: *InputSlot ManualEnvelope *PageSize A4\r
168 *UIConstraints: *InputSlot ManualEnvelope *PageSize A5\r
169 *UIConstraints: *InputSlot ManualEnvelope *PageSize B4\r
170 *UIConstraints: *InputSlot ManualEnvelope *PageSize B5\r
171 *UIConstraints: *InputSlot ManualEnvelope *PageSize A3\r
172 *UIConstraints: *InputSlot ManualEnvelope *PageSize Tabloid\r
173 *UIConstraints: *InputSlot ManualEnvelope *PageSize Universal\r
174 \r
175 *% If the paper source in Manual Paper then exclude Envelopes\r
176 *UIConstraints: *InputSlot ManualPaper *PageSize Monarch\r
177 *UIConstraints: *InputSlot ManualPaper *PageSize C4\r
178 *UIConstraints: *InputSlot ManualPaper *PageSize Comm10\r
179 *UIConstraints: *InputSlot ManualPaper *PageSize DL\r
180 *UIConstraints: *InputSlot ManualPaper *PageSize C5\r
181 *UIConstraints: *InputSlot ManualPaper *PageSize ISOB5\r
182 *UIConstraints: *InputSlot ManualPaper *PageSize C3\r
183 \r
184 *% If Resolution is 1200 dpi inhibit text smoothing\r
185 *UIConstraints: *Resolution 1200dpi *Smoothing\r
186 \r
187 *% If resolution is other than 600 dpi inhibit PictureGrade and IET\r
188 *UIConstraints: *Resolution 300dpi *JCLPictureGrade On\r
189 *UIConstraints: *Resolution 300dpi *JCLPictureGrade Off\r
190 *UIConstraints: *Resolution 1200dpi *JCLPictureGrade On\r
191 *UIConstraints: *Resolution 1200dpi *JCLPictureGrade Off\r
192 \r
193 *UIConstraints: *Resolution 300dpi *ImageEnhance\r
194 *UIConstraints: *Resolution 1200dpi *ImageEnhance\r
195 \r
196 *UIConstraints: *ImageEnhance On *JCLPictureGrade On\r
197 *UIConstraints: *ImageEnhance On *JCLPictureGrade Off\r
198 *UIConstraints: *JCLPictureGrade On *ImageEnhance\r
199 \r
200 *UIConstraints: *ImageEnhance On *Smoothing\r
201 *UIConstraints: *Smoothing True *ImageEnhance\r
202 \r
203 *% === Basic Capabilities ============\r
204 \r
205 *LanguageLevel: "2"\r
206 *Protocols: PJL TBCP\r
207 *ColorDevice: False\r
208 *DefaultColorSpace: Gray\r
209 *TTRasterizer: Type42\r
210 *FileSystem: True\r
211 *Throughput: "24"\r
212 \r
213 *FreeVM: "910000"\r
214 *VMOption 4Meg: "910000"\r
215 *VMOption 6Meg: "1034000"\r
216 *VMOption 8Meg: "1290000"\r
217 *VMOption 10Meg: "1290000"\r
218 *VMOption 12Meg: "1546000"\r
219 *VMOption 16Meg: "2058000"\r
220 *VMOption 18Meg: "2058000"\r
221 *VMOption 20Meg: "2058000"\r
222 *VMOption 24Meg: "2058000"\r
223 *VMOption 32Meg: "2058000"\r
224 *Password: "0"\r
225 *ExitServer: "\r
226 count 0 eq % is the password on the stack?\r
227 { true }\r
228 { dup % potential password\r
229 statusdict /checkpassword get exec not\r
230 } ifelse\r
231 { % if no password or not valid\r
232 (WARNING : Cannot perform the exitserver command.) =\r
233 (Password supplied is not valid.) =\r
234 (Please contact the author of this software.) = flush\r
235 quit\r
236 } if\r
237 serverdict /exitserver get exec\r
238 "\r
239 *End\r
240 *Reset: "\r
241 count 0 eq % is the password on the stack?\r
242 { true }\r
243 { dup % potential password\r
244 statusdict /checkpassword get exec not\r
245 } ifelse\r
246 { % if no password or not valid\r
247 (WARNING : Cannot reset printer.) =\r
248 (Password supplied is not valid.) =\r
249 (Please contact the author of this software.) = flush\r
250 quit\r
251 } if\r
252 serverdict /exitserver get exec\r
253 systemdict /quit get exec\r
254 (WARNING : Printer Reset Failed.) = flush\r
255 "\r
256 *End\r
257 \r
258 *% === Job Control Language ==\r
259 \r
260 *JCLBegin: "<1B>%-12345X@PJL JOB<0A>"\r
261 *JCLToPSInterpreter: "@PJL ENTER LANGUAGE = Postscript <0A>"\r
262 *JCLEnd: "<1B>%-12345X@PJL EOJ <0A><1B>%-12345X"\r
263 \r
264 *JCLOpenUI *JCLPortRotation/Port Rotation: PickOne\r
265 *DefaultJCLPortRotation: None\r
266 *OrderDependency: 10 JCLSetup *JCLPortRotation\r
267 *JCLPortRotation None/Printer's default: ""\r
268 *JCLPortRotation True/On: "@PJL LPORTROTATE<0A>"\r
269 *JCLCloseUI: *JCLPortRotation\r
270 \r
271 *JCLOpenUI *JCLDensity/Print Darkness: PickOne\r
272 *DefaultJCLDensity: PrinterSetting\r
273 *OrderDependency: 20 JCLSetup *JCLDensity\r
274 *JCLDensity PrinterSetting/Printer's default: ""\r
275 *JCLDensity VLIGHT/Very Light (-6): "@PJL SET LDENSITY = -6<0A>"\r
276 *JCLDensity LIGHT/Light (-3): "@PJL SET LDENSITY = -3<0A>"\r
277 *JCLDensity NORMAL/Normal (0): "@PJL SET LDENSITY = 0<0A>"\r
278 *JCLDensity DARK/Dark (+3): "@PJL SET LDENSITY = +3<0A>"\r
279 *JCLDensity VDARK/Very Dark (+6): "@PJL SET LDENSITY = +6<0A>"\r
280 *JCLCloseUI: *JCLDensity\r
281 \r
282 *JCLOpenUI *JCLEconomode/Toner Saver: PickOne\r
283 *DefaultJCLEconomode: PrinterSetting\r
284 *OrderDependency: 10 JCLSetup *JCLEconomode\r
285 *JCLEconomode PrinterSetting/Printer's default: ""\r
286 *JCLEconomode True/On: "@PJL SET ECONOMODE = ON<0A>"\r
287 *JCLEconomode False/Off: "@PJL SET ECONOMODE = OFF<0A>"\r
288 *JCLCloseUI: *JCLEconomode\r
289 \r
290 *% === Resolution ============\r
291 \r
292 *OpenUI *Resolution/Resolution: PickOne\r
293 *DefaultResolution: 600dpi\r
294 *OrderDependency: 10 AnySetup *Resolution\r
295 *Resolution 300dpi/300 dpi: "1 dict dup /HWResolution [300 300] put setpagedevice"\r
296 *Resolution 600dpi/600 dpi: "1 dict dup /HWResolution [600 600] put setpagedevice"\r
297 *Resolution 1200dpi/1200 Quality: "1 dict dup /HWResolution [1200 1200] put setpagedevice"\r
298 *?Resolution: "\r
299 save\r
300 currentpagedevice /HWResolution get 0 get\r
301 ( ) cvs print (dpi) = flush\r
302 restore\r
303 "\r
304 *End\r
305 *CloseUI: *Resolution\r
306 \r
307 *OpenUI *Smoothing/Smoothing: Boolean\r
308 *DefaultSmoothing: False\r
309 *OrderDependency: 40 AnySetup *Smoothing\r
310 *Smoothing True/On: "\r
311 1 dict dup /PostRenderingEnhanceDetails 1 dict dup /REValue 2 put put setpagedevice"\r
312 *End\r
313 *Smoothing False/Off: "\r
314 1 dict dup /PostRenderingEnhanceDetails 1 dict dup /REValue 0 put put setpagedevice"\r
315 *End\r
316 *?Smoothing: "\r
317 save\r
318 currentpagedevice /PostRenderingEnhanceDetails get /REValue get\r
319 dup 3 gt{pop 4}if [(False)(True)(True)(True)(Unknown)] exch get = flush\r
320 restore\r
321 "\r
322 *End\r
323 *CloseUI: *Smoothing\r
324 \r
325 *OpenUI *ImageEnhance/Image Enhancement: Boolean\r
326 *DefaultImageEnhance: False\r
327 *OrderDependency: 40 AnySetup *ImageEnhance\r
328 *ImageEnhance True/On: "\r
329 1 dict dup /DeviceRenderingInfo 1 dict dup /ImageEnhancement 1 put put setpagedevice"\r
330 *End\r
331 *ImageEnhance False/Off: "\r
332 1 dict dup /DeviceRenderingInfo 1 dict dup /ImageEnhancement 0 put put setpagedevice"\r
333 *End\r
334 *CloseUI: *ImageEnhance\r
335 \r
336 *JCLOpenUI *JCLPictureGrade/PictureGrade: PickOne\r
337 *DefaultJCLPictureGrade: Printer\r
338 *OrderDependency: 10 JCLSetup *JCLPictureGrade\r
339 *JCLPictureGrade Printer/Printer's default:""\r
340 *JCLPictureGrade On/On: "@PJL SET LPARM:POSTSCRIPT LPICTUREGRADE = ON<0A>"\r
341 *JCLPictureGrade Off/Off: "@PJL SET LPARM:POSTSCRIPT LPICTUREGRADE = OFF<0A>"\r
342 *JCLCloseUI: *JCLPictureGrade\r
343 \r
344 \r
345 *% === Halftone Information ===============\r
346 \r
347 *ScreenFreq: "60.0"\r
348 *ScreenAngle: "45.0"\r
349 *DefaultScreenProc: Dot\r
350 *ScreenProc Dot: "\r
351 {abs exch abs 2 copy add 1 gt {1 sub dup mul exch 1 sub dup mul add 1\r
352 sub }{dup mul exch dup mul add 1 exch sub }ifelse }\r
353 "\r
354 *End\r
355 *ScreenProc Line: "{ pop }"\r
356 *ScreenProc Ellipse: "{ dup 5 mul 8 div mul exch dup mul exch add sqrt 1 exch sub }"\r
357 \r
358 *DefaultTransfer: Factory\r
359 *Transfer Factory: "{ }"\r
360 *Transfer Factory.Inverse: "{ 1 exch sub }"\r
361 \r
362 *% === Paper Handling ===================\r
363 \r
364 *LandscapeOrientation: Plus90\r
365 \r
366 *% These entries will set up the frame buffer.\r
367 *% Usually used with AutoSelect input slot.\r
368 *% Used C4 for C9 envelope, ISOB5 for B5 envelope, and C3 for\r
369 *% Other Envelope because C9, B5, and Other Envelope are not defined in\r
370 *% Adobe PPD specifications. Correct sizes, regions, imageable areas, and\r
371 *% dimensions are given. Translation strings give correct names.\r
372 \r
373 *OpenUI *PageSize: PickOne\r
374 *OrderDependency: 30 AnySetup *PageSize\r
375 *DefaultPageSize: Letter\r
376 \r
377 *PageSize Letter/Letter: "\r
378 2 dict dup /PageSize [612 792] put dup /ImagingBBox null put setpagedevice"\r
379 *End\r
380 *PageSize Legal/Legal: "\r
381 2 dict dup /PageSize [612 1008] put dup /ImagingBBox null put setpagedevice"\r
382 *End\r
383 *PageSize Executive/Executive: "\r
384 2 dict dup /PageSize [522 756] put dup /ImagingBBox null put setpagedevice"\r
385 *End\r
386 *PageSize A4/A4: "\r
387 2 dict dup /PageSize [595 842] put dup /ImagingBBox null put setpagedevice"\r
388 *End\r
389 *PageSize A5/A5: "\r
390 2 dict dup /PageSize [420 595] put dup /ImagingBBox null put setpagedevice"\r
391 *End\r
392 *PageSize B5/B5: "\r
393 2 dict dup /PageSize [516 729] put dup /ImagingBBox null put setpagedevice"\r
394 *End\r
395 *% Engine value used; different from 4079P; Hp 5si\r
396 *PageSize A3/A3: "\r
397 2 dict dup /PageSize [842 1191] put dup /ImagingBBox null put setpagedevice"\r
398 *End\r
399 *PageSize Tabloid/Tabloid: "\r
400 2 dict dup /PageSize [792 1224] put dup /ImagingBBox null put setpagedevice"\r
401 *End\r
402 *PageSize Universal/Custom 11.7 x 17.7 in: "\r
403 2 dict dup /PageSize [842 1274] put dup /ImagingBBox null put setpagedevice"\r
404 *End\r
405 *PageSize B4/B4: "\r
406 2 dict dup /PageSize [729 1032] put dup /ImagingBBox null put setpagedevice"\r
407 *End\r
408 *PageSize Monarch/Monarch Envelope: "\r
409 2 dict dup /PageSize [279 540] put dup /ImagingBBox null put setpagedevice"\r
410 *End\r
411 *PageSize C4/C9 Envelope: "\r
412 2 dict dup /PageSize [279 639] put dup /ImagingBBox null put setpagedevice"\r
413 *End\r
414 *PageSize Comm10/C10 Envelope: "\r
415 2 dict dup /PageSize [297 684] put dup /ImagingBBox null put setpagedevice"\r
416 *End\r
417 *PageSize DL/DL Envelope: "\r
418 2 dict dup /PageSize [312 624] put dup /ImagingBBox null put setpagedevice"\r
419 *End\r
420 *PageSize C5/C5 Envelope: "\r
421 2 dict dup /PageSize [459 649] put dup /ImagingBBox null put setpagedevice"\r
422 *End\r
423 *PageSize ISOB5/B5 Envelope: "\r
424 2 dict dup /PageSize [499 709] put dup /ImagingBBox null put setpagedevice"\r
425 *End\r
426 *PageSize C3/Other Envelope: "\r
427 2 dict dup /PageSize [612 1008] put dup /ImagingBBox null put setpagedevice"\r
428 *End\r
429 *?PageSize: "\r
430 save\r
431 17 dict\r
432 dup /letter (Letter) put\r
433 dup /legal (Legal) put\r
434 dup /executivepage (Executive) put\r
435 dup /a4 (A4) put\r
436 dup /a5 (A5) put\r
437 dup /b5 (B5) put\r
438 dup /a3 (A3) put\r
439 dup /tabloid (Tabloid) put\r
440 dup /oversize (Tabloid.Oversize) put\r
441 dup /b4 (B4) put\r
442 dup /3.875x7.5envelope (Monarch) put\r
443 dup /3.875x8.875envelope (C9) put\r
444 dup /4.125x9.5envelope (Comm10) put\r
445 dup /110x220envelope (DL) put\r
446 dup /162x229envelope (C5) put\r
447 dup /176x250envelope (Envelope.499.709) put\r
448 dup /otherenvelope (Envelope.612.996) put\r
449 statusdict /papersize get exec\r
450 3 1 roll {get} stopped {(Unknown)}if\r
451 exch not { print (.Transverse) }if\r
452 = flush\r
453 restore\r
454 "\r
455 *End\r
456 \r
457 \r
458 *CloseUI: *PageSize\r
459 \r
460 *% These entries will set up the frame buffer.\r
461 *% Usually used with input slots other than AutoSelect.\r
462 *% Used C4 for C9 envelope, ISOB5 for B5 envelope, and C3 for\r
463 *% Other Envelope because C9, B5, and Other Envelope are not defined in\r
464 *% Adobe PPD specifications. Correct sizes, regions, imageable areas, and\r
465 *% dimensions are given. Translation strings give correct names.\r
466 \r
467 *OpenUI *PageRegion: PickOne\r
468 *OrderDependency: 40 AnySetup *PageRegion\r
469 *DefaultPageRegion: Letter\r
470 \r
471 *PageRegion Letter: "\r
472 2 dict dup /PageSize [612 792] put dup /ImagingBBox null put setpagedevice"\r
473 *End\r
474 *PageRegion Legal: "\r
475 2 dict dup /PageSize [612 1008] put dup /ImagingBBox null put setpagedevice"\r
476 *End\r
477 *PageRegion Executive: "\r
478 2 dict dup /PageSize [522 756] put dup /ImagingBBox null put setpagedevice"\r
479 *End\r
480 *PageRegion A4: "\r
481 2 dict dup /PageSize [595 842] put dup /ImagingBBox null put setpagedevice"\r
482 *End\r
483 *PageRegion A5: "\r
484 2 dict dup /PageSize [420 595] put dup /ImagingBBox null put setpagedevice"\r
485 *End\r
486 *PageRegion B5: "\r
487 2 dict dup /PageSize [516 729] put dup /ImagingBBox null put setpagedevice"\r
488 *End\r
489 *PageRegion A3: "\r
490 2 dict dup /PageSize [842 1191] put dup /ImagingBBox null put setpagedevice"\r
491 *End\r
492 *PageRegion Tabloid: "\r
493 2 dict dup /PageSize [792 1224] put dup /ImagingBBox null put setpagedevice"\r
494 *End\r
495 *PageRegion Universal: "\r
496 2 dict dup /PageSize [842 1274] put dup /ImagingBBox null put setpagedevice"\r
497 *End\r
498 *PageRegion B4: "\r
499 2 dict dup /PageSize [729 1032] put dup /ImagingBBox null put setpagedevice"\r
500 *End\r
501 \r
502 *PageRegion Monarch: "\r
503 2 dict dup /PageSize [279 540] put dup /ImagingBBox null put setpagedevice"\r
504 *End\r
505 *PageRegion C4: "\r
506 2 dict dup /PageSize [279 639] put dup /ImagingBBox null put setpagedevice"\r
507 *End\r
508 *PageRegion Comm10: "\r
509 2 dict dup /PageSize [297 684] put dup /ImagingBBox null put setpagedevice"\r
510 *End\r
511 *PageRegion DL: "\r
512 2 dict dup /PageSize [312 624] put dup /ImagingBBox null put setpagedevice"\r
513 *End\r
514 *PageRegion C5: "\r
515 2 dict dup /PageSize [459 649] put dup /ImagingBBox null put setpagedevice"\r
516 *End\r
517 *PageRegion ISOB5: "\r
518 2 dict dup /PageSize [499 709] put dup /ImagingBBox null put setpagedevice"\r
519 *End\r
520 *PageRegion C3: "\r
521 2 dict dup /PageSize [612 1008] put dup /ImagingBBox null put setpagedevice"\r
522 *End\r
523 \r
524 *CloseUI: *PageRegion\r
525 \r
526 *% Used C4 for C9 envelope, ISOB5 for B5 envelope, and C3 for\r
527 *% Other Envelope because C9, B5, and Other Envelope are not defined in\r
528 *% Adobe PPD specifications. Correct sizes, regions, imageable areas, and\r
529 *% dimensions are given. Translation strings give correct names.\r
530 *DefaultImageableArea: Letter\r
531 *ImageableArea Letter: "12 12 600 780"\r
532 *ImageableArea Legal: "12 12 600 996"\r
533 *ImageableArea Executive: "12 12 510 744"\r
534 *ImageableArea A4: "7 12 585 829"\r
535 *ImageableArea A5: "12 12 407 583"\r
536 *ImageableArea B5: "12 12 505 716"\r
537 *ImageableArea A3: "12 12 829 1178"\r
538 *ImageableArea Tabloid: "12 12 780 1212"\r
539 *ImageableArea Universal: "12 12 830 1262"\r
540 *ImageableArea B4: "12 12 716 1020"\r
541 *ImageableArea Monarch: "1 12 267 528"\r
542 *ImageableArea C4: "1 12 267 626"\r
543 *ImageableArea Comm10: "3 12 285 672"\r
544 *ImageableArea DL: "2 12 299 611"\r
545 *ImageableArea C5: "4 12 447 636"\r
546 *ImageableArea ISOB5: "2 12 486 696"\r
547 *ImageableArea C3: "12 12 600 996"\r
548 *?ImageableArea: "\r
549 save\r
550 /cvp { cvi ( ) cvs print ( ) print } bind def\r
551 newpath clippath pathbbox\r
552 4 -2 roll exch 2 {ceiling cvp} repeat\r
553 exch 2 {floor cvp} repeat flush\r
554 restore\r
555 "\r
556 *End\r
557 \r
558 *% These provide the physical dimensions of the paper (by keyword)\r
559 *% Used C4 for C9 envelope, ISOB5 for B5 envelope, and C3 for\r
560 *% Other Envelope because C9, B5, and Other Envelope are not defined in\r
561 *% Adobe PPD specifications. Correct sizes, regions, imageable areas, and\r
562 *% dimensions are given. Translation strings give correct names.\r
563 \r
564 *DefaultPaperDimension: Letter\r
565 *PaperDimension Letter: "612 792"\r
566 *PaperDimension Legal: "612 1008"\r
567 *PaperDimension Executive: "522 756"\r
568 *PaperDimension A4: "595 842"\r
569 *PaperDimension A5: "420 595"\r
570 *PaperDimension B5: "516 729"\r
571 *PaperDimension A3: "842 1191"\r
572 *PaperDimension Tabloid: "792 1224"\r
573 *PaperDimension Universal: "842 1274"\r
574 *PaperDimension B4: "729 1032"\r
575 *PaperDimension Monarch: "279 540"\r
576 *PaperDimension C4: "279 639"\r
577 *PaperDimension Comm10: "297 684"\r
578 *PaperDimension DL: "312 624"\r
579 *PaperDimension C5: "459 649"\r
580 *PaperDimension ISOB5: "499 709"\r
581 *PaperDimension C3: "612 1008"\r
582 \r
583 *RequiresPageRegion All: True\r
584 \r
585 *% ==== Standard Input Paper Sources\r
586 \r
587 *OpenUI *InputSlot: PickOne\r
588 *OrderDependency: 20 AnySetup *InputSlot\r
589 *DefaultInputSlot: AutoSelect\r
590 *InputSlot AutoSelect/Auto Select: "\r
591 1 dict dup /Policies 1 dict dup /PageSize 2 put put setpagedevice"\r
592 *End\r
593 *InputSlot Tray1/Upper (Tray 1): "\r
594 1 dict dup /MediaPosition null put setpagedevice\r
595 currentpagedevice /InputAttributes get 0 get setpagedevice\r
596 1 dict dup /InputAttributes 1 dict dup /Priority [0] put put setpagedevice\r
597 1 dict dup /Policies 1 dict dup /PageSize 7 put put setpagedevice"\r
598 *End\r
599 *InputSlot Tray2/Lower (Tray 2): "\r
600 1 dict dup /MediaPosition null put setpagedevice\r
601 currentpagedevice /InputAttributes get 1 get setpagedevice\r
602 1 dict dup /InputAttributes 1 dict dup /Priority [1] put put setpagedevice\r
603 1 dict dup /Policies 1 dict dup /PageSize 7 put put setpagedevice"\r
604 *End\r
605 *InputSlot MultiPurpose/Multipurpose Tray: "\r
606 1 dict dup /MediaPosition null put setpagedevice\r
607 currentpagedevice /InputAttributes get 2 get setpagedevice\r
608 1 dict dup /InputAttributes 1 dict dup /Priority [2] put put setpagedevice\r
609 1 dict dup /Policies 1 dict dup /PageSize 7 put put setpagedevice"\r
610 *End\r
611 *% ==== Optional Input Sources ====\r
612 \r
613 *% If not installed select upper tray instead.\r
614 *InputSlot Tray3/Input Drawer (Tray 3): "\r
615 1 dict dup /MediaPosition null put setpagedevice\r
616 userdict /lms\r
617 currentpagedevice /InputAttributes get 3 known { 3 }{ 0 }ifelse put\r
618 currentpagedevice /InputAttributes get lms get setpagedevice\r
619 1 dict dup /InputAttributes 1 dict dup /Priority [lms] put put setpagedevice\r
620 1 dict dup /Policies 1 dict dup /PageSize 7 put put setpagedevice"\r
621 *End\r
622 \r
623 *% If the Envelope Feeder is not installed then do a manual Feed\r
624 *InputSlot Feeder/Envelope Feeder: "\r
625 1 dict dup /MediaPosition null put setpagedevice\r
626 currentpagedevice /InputAttributes get 4 known\r
627 { 1 dict dup /Policies 1 dict dup /PageSize 2 put put setpagedevice\r
628 1 dict dup/InputAttributes 1 dict dup /Priority [4] put put setpagedevice }\r
629 { 1 dict dup /ManualFeed true put setpagedevice }ifelse"\r
630 *End\r
631 *InputSlot ManualPaper/Manual Paper: "\r
632 1 dict dup /ManualFeed true put setpagedevice\r
633 1 dict dup /MediaPosition null put setpagedevice\r
634 1 dict dup /Policies 1 dict dup /PageSize 2 put put setpagedevice"\r
635 *End\r
636 *InputSlot ManualEnvelope/Manual Envelope: "\r
637 1 dict dup /ManualFeed true put setpagedevice\r
638 1 dict dup /MediaPosition null put setpagedevice\r
639 1 dict dup /Policies 1 dict dup /PageSize 2 put put setpagedevice"\r
640 *End\r
641 *?InputSlot: "\r
642 save\r
643 [ (Upper) (Lower) (Multipurpose) (Manual) (Manual Envelope) (Tray3) (Feeder) ]\r
644 statusdict /papertray get exec\r
645 {get exec} stopped { pop pop (Unknown) } if = flush\r
646 restore\r
647 "\r
648 *End\r
649 \r
650 *CloseUI: *InputSlot\r
651 \r
652 *% *OpenUI *ManualFeed/Manual Paper: Boolean\r
653 *% *OrderDependency: 15 AnySetup *ManualFeed\r
654 *% *DefaultManualFeed: False\r
655 *% *ManualFeed True: "1 dict dup /ManualFeed true put setpagedevice"\r
656 *% *ManualFeed False: "1 dict dup /ManualFeed false put setpagedevice"\r
657 *% *?ManualFeed: "\r
658 *% save\r
659 *% currentpagedevice /ManualFeed get {(True)}{(False)}ifelse = flush\r
660 *% restore\r
661 *% "\r
662 *% *End\r
663 *% *CloseUI: *ManualFeed\r
664 \r
665 \r
666 *OpenUI *TraySwitch/Tray Linking: PickOne\r
667 \r
668 *OrderDependency: 50 AnySetup *TraySwitch\r
669 *DefaultTraySwitch: Off\r
670 *TraySwitch False/No Tray Linking: "\r
671 1 dict dup /TraySwitch false put setpagedevice"\r
672 *End\r
673 *TraySwitch Tray12/Link Tray 1+2: "\r
674 1 dict dup /DeviceRenderingInfo 1 dict dup /TrayLinking 1 put put setpagedevice\r
675 1 dict dup /TraySwitch true put setpagedevice"\r
676 *End\r
677 *TraySwitch Tray123/Link Tray 1+2+3: "\r
678 1 dict dup /DeviceRenderingInfo 1 dict dup /TrayLinking 2 put put setpagedevice\r
679 1 dict dup /TraySwitch true put setpagedevice"\r
680 *End\r
681 *TraySwitch Tray23/Link Tray 2+3: "\r
682 1 dict dup /DeviceRenderingInfo 1 dict dup /TrayLinking 3 put put setpagedevice\r
683 1 dict dup /TraySwitch true put setpagedevice"\r
684 *End\r
685 *?TraySwitch: "\r
686 save\r
687 currentpagedevice /TraySwitch get {(True)}{(False)}ifelse = flush\r
688 restore\r
689 "\r
690 *End\r
691 *CloseUI: *TraySwitch\r
692 \r
693 \r
694 *DefaultOutputOrder: Normal\r
695 *OutputOrder Normal: ""\r
696 *OutputOrder Reverse: ""\r
697 \r
698 *% ==== Duplex Printing Selection ====\r
699 \r
700 *OpenUI *Duplex/Duplex: PickOne\r
701 *DefaultDuplex: None\r
702 *Duplex None/Simplex: "1 dict dup /Duplex false put setpagedevice"\r
703 *Duplex DuplexNoTumble/Duplex - Long Edge: "\r
704 statusdict /duplexer get exec\r
705 { 2 dict dup /Duplex true put dup /Tumble false put setpagedevice }\r
706 { 1 dict dup /Duplex false put setpagedevice }\r
707 ifelse\r
708 "\r
709 *End\r
710 *Duplex DuplexTumble/Duplex - Short Edge: "\r
711 statusdict /duplexer get exec\r
712 { 2 dict dup /Duplex true put dup /Tumble true put setpagedevice }\r
713 { 1 dict dup /Duplex false put setpagedevice }\r
714 ifelse\r
715 "\r
716 *End\r
717 *?Duplex: "\r
718 save\r
719 currentpagedevice /Duplex get {(True)}{(False)}ifelse = flush\r
720 restore\r
721 "\r
722 *End\r
723 *CloseUI: *Duplex\r
724 \r
725 *% ==== Collated Copies ====\r
726 \r
727 *OpenUI *LXCollate/Collate Copies: Boolean\r
728 *DefaultLXCollate: False\r
729 *OrderDependency: 44 AnySetup *LXCollate\r
730 *LXCollate True/On: "1 dict dup /Collate true put setpagedevice"\r
731 *LXCollate False/Off: "1 dict dup /Collate false put setpagedevice"\r
732 *CloseUI: *LXCollate\r
733 \r
734 *% ==== Output Finisher ====\r
735 \r
736 *OpenUI *OutputBin/Output Bin: PickOne\r
737 *DefaultOutputBin: Bin0\r
738 *OrderDependency: 45 AnySetup *OutputBin\r
739 *OutputBin Bin0/Bin 0 (Top):"\r
740 1 dict dup /OutputAttributes 1 dict dup /Priority [0] put put setpagedevice"\r
741 *End\r
742 *OutputBin Bin1/Bin 1 (Side):"\r
743 1 dict dup /OutputAttributes 1 dict dup /Priority [1] put put setpagedevice"\r
744 *End\r
745 \r
746 *CloseUI: *OutputBin\r
747 \r
748 *OpenUI *StapleLocation/Staple: PickOne\r
749 *DefaultStapleLocation: Off\r
750 *OrderDependency: 170 AnySetup *StapleLocation\r
751 *StapleLocation Off/Off: "\r
752 1 dict dup /Staple 0 put setpagedevice"\r
753 *End\r
754 *StapleLocation Staple1/Staple 1: "\r
755 2 dict dup /Staple 3 put dup /StapleDetails 2 dict dup /Type 93 put dup\r
756 /Number 1 put put setpagedevice"\r
757 *End\r
758 *StapleLocation Staple2/Staple 2: "\r
759 2 dict dup /Staple 3 put dup /StapleDetails 2 dict dup /Type 93 put dup\r
760 /Number 2 put put setpagedevice"\r
761 *End\r
762 *CloseUI: *StapleLocation\r
763 \r
764 *CloseGroup: FinisherOptions\r
765 \r
766 \r
767 \r
768 *% === Font Information ==========================================\r
769 \r
770 *DefaultFont: Courier\r
771 *Font Courier: Standard "(001.000)" Standard ROM\r
772 *Font Courier-Bold: Standard "(001.000)" Standard ROM\r
773 *Font Courier-Oblique: Standard "(001.000)" Standard ROM\r
774 *Font Courier-BoldOblique: Standard "(001.000)" Standard ROM\r
775 *Font Times-Roman: Standard "(001.000)" Standard ROM\r
776 *Font Times-Bold: Standard "(001.000)" Standard ROM\r
777 *Font Times-Italic: Standard "(001.000)" Standard ROM\r
778 *Font Times-BoldItalic: Standard "(001.000)" Standard ROM\r
779 *Font Helvetica: Standard "(001.000)" Standard ROM\r
780 *Font Helvetica-Bold: Standard "(001.000)" Standard ROM\r
781 *Font Helvetica-Oblique: Standard "(001.000)" Standard ROM\r
782 *Font Helvetica-BoldOblique: Standard "(001.000)" Standard ROM\r
783 *Font Helvetica-Narrow: Standard "(001.000)" Standard ROM\r
784 *Font Helvetica-Narrow-Bold: Standard "(001.000)" Standard ROM\r
785 *Font Helvetica-Narrow-BoldOblique: Standard "(001.000)" Standard ROM\r
786 *Font Helvetica-Narrow-Oblique: Standard "(001.000)" Standard ROM\r
787 *Font Symbol: Special "(001.000)" Standard ROM\r
788 *Font AvantGarde-Book: Standard "(001.000)" Standard ROM\r
789 *Font AvantGarde-BookOblique: Standard "(001.000)" Standard ROM\r
790 *Font AvantGarde-Demi: Standard "(001.000)" Standard ROM\r
791 *Font AvantGarde-DemiOblique: Standard "(001.000)" Standard ROM\r
792 *Font Bookman-Demi: Standard "(001.000)" Standard ROM\r
793 *Font Bookman-DemiItalic: Standard "(001.000)" Standard ROM\r
794 *Font Bookman-Light: Standard "(001.000)" Standard ROM\r
795 *Font Bookman-LightItalic: Standard "(001.000)" Standard ROM\r
796 *Font Helvetica-Light: Standard "(001.000)" Standard ROM\r
797 *Font Helvetica-LightOblique: Standard "(001.000)" Standard ROM\r
798 *Font Helvetica-Black: Standard "(001.000)" Standard ROM\r
799 *Font Helvetica-BlackOblique: Standard "(001.000)" Standard ROM\r
800 *Font NewCenturySchlbk-Roman: Standard "(001.000)" Standard ROM\r
801 *Font NewCenturySchlbk-Bold: Standard "(001.000)" Standard ROM\r
802 *Font NewCenturySchlbk-Italic: Standard "(001.000)" Standard ROM\r
803 *Font NewCenturySchlbk-BoldItalic: Standard "(001.000)" Standard ROM\r
804 *Font Palatino-Roman: Standard "(001.000)" Standard ROM\r
805 *Font Palatino-Bold: Standard "(001.000)" Standard ROM\r
806 *Font Palatino-Italic: Standard "(001.000)" Standard ROM\r
807 *Font Palatino-BoldItalic: Standard "(001.000)" Standard ROM\r
808 *Font ZapfChancery-MediumItalic: Standard "(001.000)" Standard ROM\r
809 *Font ZapfDingbats: Special "(001.000)" Special ROM\r
810 *?FontQuery: "\r
811 save\r
812 4 dict begin\r
813 /sv exch def\r
814 /str (fonts/ ) def\r
815 /st2 128 string def\r
816 { count 0 gt\r
817 { dup st2 cvs (/) print print (:) print dup FontDirectory exch known\r
818 {pop (Yes)}\r
819 { str exch st2 cvs dup length /len exch def\r
820 6 exch putinterval str 0 len 6 add getinterval mark exch\r
821 { } st2 filenameforall counttomark 0 gt\r
822 { cleartomark (Yes)}{cleartomark (No)}ifelse\r
823 }ifelse = flush\r
824 }{ exit } ifelse\r
825 } bind loop\r
826 (*) = flush\r
827 sv\r
828 end\r
829 restore\r
830 "\r
831 *End\r
832 \r
833 *?FontList: "\r
834 save\r
835 2 dict begin\r
836 /sv exch def\r
837 /str 128 string def\r
838 FontDirectory { pop == } bind forall flush\r
839 /filenameforall where\r
840 { pop save (fonts/*)\r
841 { dup length 6 sub 6 exch getinterval cvn == } bind\r
842 str filenameforall flush restore\r
843 } if\r
844 (*) = flush\r
845 sv\r
846 end\r
847 restore\r
848 "\r
849 *End\r
850 \r
851 *% Printer Messages (verbatim from printer):\r
852 *Message: "%% exitserver: permanent state may be changed %%"\r
853 *Message: "%% Flushing: rest of job (to end-of-file) will be ignored %%"\r
854 *Message: "\FontName\ not found, using Courier"\r
855 \r
856 *% Status (format: %% status: <one of these> %% )\r
857 *Status: "Printer Busy"\r
858 *Status: "Warming Up"\r
859 *Status: "idle"\r
860 *Status: "busy"\r
861 *Status: "waiting"\r
862 *Status: "initializing"\r
863 *Status: "not ready"\r
864 \r
865 *% Input Sources (format: %% status: <stat>; source: <one of these> %% )\r
866 *Source: "Serial"\r
867 *Source: "Parallel"\r
868 *Source: "Network"\r
869 \r
870 *% Printer Error (format: %% PrinterError: <one of these> %%)\r
871 *PrinterError: "Paper Jam"\r
872 *PrinterError: "Wrong Paper Length"\r
873 *PrinterError: "Invalid Manual Insertion"\r
874 *PrinterError: "Change Size in Feeder"\r
875 *PrinterError: "Change Size in Tray 1"\r
876 *PrinterError: "Change Size in Tray 2"\r
877 *PrinterError: "Paper Out or Feed Failure - Feed"\r
878 *PrinterError: "Load Manual Envelope"\r
879 *PrinterError: "Paper Out or Feed Failure - Tray 1"\r
880 *PrinterError: "Paper Out or Feed Failure - Tray 2"\r
881 *PrinterError: "Load Manual Paper"\r
882 *PrinterError: "Output Bin Full"\r
883 *PrinterError: "Cover Open/Cartridge Not Installed"\r
884 *PrinterError: "Insufficient Memory"\r
885 *PrinterError: "Complex Page"\r
886 *PrinterError: "Default Storage Error"\r
887 *PrinterError: "Defective Font Card Installed"\r
888 *PrinterError: "Flash Full"\r
889 *PrinterError: "ioerror"\r
890 *PrinterError: "Flash Error"\r
891 *PrinterError: "Duplex Not Attached"\r
892 *PrinterError: "Duplex Cover Open"\r
893 *PrinterError: "Scheduled Maintenance"\r
894 *PrinterError: "Toner Low"\r
895 *PrinterError: "Service Error"\r
896 \r
897 *%DeviceAdjustMatrix: " 1 0 0 1 0 0 "\r
898 \r
899 *% === Color Separation Information =====================\r
900 \r
901 *DefaultColorSep: ProcessBlack.85lpi.600dpi/85 lpi / 600 dpi\r
902 \r
903 *InkName: ProcessBlack/Process Black\r
904 *InkName: CustomColor/Custom Color\r
905 *InkName: ProcessCyan/Process Cyan\r
906 *InkName: ProcessMagenta/Process Magenta\r
907 *InkName: ProcessYellow/Process Yellow\r
908 \r
909 *% For 60 lpi / 300 dpi ===============================\r
910 \r
911 *ColorSepScreenAngle ProcessBlack.60lpi.300dpi/60 lpi / 300 dpi: "45"\r
912 *ColorSepScreenAngle CustomColor.60lpi.300dpi/60 lpi / 300 dpi: "45"\r
913 *ColorSepScreenAngle ProcessCyan.60lpi.300dpi/60 lpi / 300 dpi: "15"\r
914 *ColorSepScreenAngle ProcessMagenta.60lpi.300dpi/60 lpi / 300 dpi: "75"\r
915 *ColorSepScreenAngle ProcessYellow.60lpi.300dpi/60 lpi / 300 dpi: "0"\r
916 \r
917 *ColorSepScreenFreq ProcessBlack.60lpi.300dpi/60 lpi / 300 dpi: "60"\r
918 *ColorSepScreenFreq CustomColor.60lpi.300dpi/60 lpi / 300 dpi: "60"\r
919 *ColorSepScreenFreq ProcessCyan.60lpi.300dpi/60 lpi / 300 dpi: "60"\r
920 *ColorSepScreenFreq ProcessMagenta.60lpi.300dpi/60 lpi / 300 dpi: "60"\r
921 *ColorSepScreenFreq ProcessYellow.60lpi.300dpi/60 lpi / 300 dpi: "60"\r
922 \r
923 *% For 53 lpi / 300 dpi ===============================\r
924 \r
925 *ColorSepScreenAngle ProcessBlack.53lpi.300dpi/53 lpi / 300 dpi: "45.0"\r
926 *ColorSepScreenAngle CustomColor.53lpi.300dpi/53 lpi / 300 dpi: "45.0"\r
927 *ColorSepScreenAngle ProcessCyan.53lpi.300dpi/53 lpi / 300 dpi: "71.5651"\r
928 *ColorSepScreenAngle ProcessMagenta.53lpi.300dpi/53 lpi / 300 dpi: "18.4349"\r
929 *ColorSepScreenAngle ProcessYellow.53lpi.300dpi/53 lpi / 300 dpi: "0.0"\r
930 \r
931 *ColorSepScreenFreq ProcessBlack.53lpi.300dpi/53 lpi / 300 dpi: "53.033"\r
932 *ColorSepScreenFreq CustomColor.53lpi.300dpi/53 lpi / 300 dpi: "53.033"\r
933 *ColorSepScreenFreq ProcessCyan.53lpi.300dpi/53 lpi / 300 dpi: "47.4342"\r
934 *ColorSepScreenFreq ProcessMagenta.53lpi.300dpi/53 lpi / 300 dpi: "47.4342"\r
935 *ColorSepScreenFreq ProcessYellow.53lpi.300dpi/53 lpi / 300 dpi: "50.0"\r
936 \r
937 *% For 85 lpi / 600 dpi 5,5,2,6,6,2,20/3,0) =====================\r
938 \r
939 *ColorSepScreenAngle ProcessBlack.85lpi.600dpi/85 lpi / 600 dpi: "45.0"\r
940 *ColorSepScreenAngle CustomColor.85lpi.600dpi/85 lpi / 600 dpi: "45.0"\r
941 *ColorSepScreenAngle ProcessCyan.85lpi.600dpi/85 lpi / 600 dpi: "71.5651"\r
942 *ColorSepScreenAngle ProcessMagenta.85lpi.600dpi/85 lpi / 600 dpi: "18.4349"\r
943 *ColorSepScreenAngle ProcessYellow.85lpi.600dpi/85 lpi / 600 dpi: "0.0"\r
944 \r
945 *ColorSepScreenFreq ProcessBlack.85lpi.600dpi/85 lpi / 600 dpi: "84.8528"\r
946 *ColorSepScreenFreq CustomColor.85lpi.600dpi/85 lpi / 600 dpi: "84.8528"\r
947 *ColorSepScreenFreq ProcessCyan.85lpi.600dpi/85 lpi / 600 dpi: "94.8683"\r
948 *ColorSepScreenFreq ProcessMagenta.85lpi.600dpi/85 lpi / 600 dpi: "94.8683"\r
949 *ColorSepScreenFreq ProcessYellow.85lpi.600dpi/85 lpi / 600 dpi: "30.0"\r
950 \r
951 *ColorSepScreenProc ProcessYellow.85lpi.600dpi/85 lpi / 600 dpi: "\r
952 {1 add 2 div 3 mul dup floor sub 2 mul 1 sub exch\r
953 1 add 2 div 3 mul dup floor sub 2 mul 1 sub exch\r
954 abs exch abs 2 copy add 1 gt {1 sub dup mul exch 1 sub dup mul add 1\r
955 sub }{dup mul exch dup mul add 1 exch sub }ifelse }\r
956 "\r
957 *End\r
958 \r
959 *% For 71 lpi / 600 dpi ===============================\r
960 \r
961 *ColorSepScreenAngle ProcessBlack.71lpi.600dpi/71 lpi / 600 dpi: "45.0"\r
962 *ColorSepScreenAngle CustomColor.71lpi.600dpi/71 lpi / 600 dpi: "45.0"\r
963 *ColorSepScreenAngle ProcessCyan.71lpi.600dpi/71 lpi / 600 dpi: "71.5651"\r
964 *ColorSepScreenAngle ProcessMagenta.71lpi.600dpi/71 lpi / 600 dpi: "18.4349"\r
965 *ColorSepScreenAngle ProcessYellow.71lpi.600dpi/71 lpi / 600 dpi: "0.0"\r
966 \r
967 *ColorSepScreenFreq ProcessBlack.71lpi.600dpi/71 lpi / 600 dpi: "70.7107"\r
968 *ColorSepScreenFreq CustomColor.71lpi.600dpi/71 lpi / 600 dpi: "70.7107"\r
969 *ColorSepScreenFreq ProcessCyan.71lpi.600dpi/71 lpi / 600 dpi: "63.2456"\r
970 *ColorSepScreenFreq ProcessMagenta.71lpi.600dpi/71 lpi / 600 dpi: "63.2456"\r
971 *ColorSepScreenFreq ProcessYellow.71lpi.600dpi/71 lpi / 600 dpi: "66.6667"\r
972 \r
973 *% For 106 lpi / 1200 dpi ===================================================\r
974 \r
975 *ColorSepScreenAngle ProcessBlack.106lpi.1200dpi/106 lpi / 1200 dpi: "45.0"\r
976 *ColorSepScreenAngle CustomColor.106lpi.1200dpi/106 lpi / 1200 dpi: "45.0"\r
977 *ColorSepScreenAngle ProcessCyan.106lpi.1200dpi/106 lpi / 1200 dpi: "71.5651"\r
978 *ColorSepScreenAngle ProcessMagenta.106lpi.1200dpi/106 lpi / 1200 dpi: "18.4349"\r
979 *ColorSepScreenAngle ProcessYellow.106lpi.1200dpi/106 lpi / 1200 dpi: "0.0"\r
980 \r
981 *ColorSepScreenFreq ProcessBlack.106lpi.1200dpi/106 lpi / 1200 dpi: "106.066"\r
982 *ColorSepScreenFreq CustomColor.106lpi.1200dpi/106 lpi / 1200 dpi: "106.066"\r
983 *ColorSepScreenFreq ProcessCyan.106lpi.1200dpi/106 lpi / 1200 dpi: "94.8683"\r
984 *ColorSepScreenFreq ProcessMagenta.106lpi.1200dpi/106 lpi / 1200 dpi: "94.8683"\r
985 *ColorSepScreenFreq ProcessYellow.106lpi.1200dpi/106 lpi / 1200 dpi: "100.0"\r
986 \r
987 *% For 116 lpi / 1200 dpi ===================================================\r
988 \r
989 *ColorSepScreenAngle ProcessBlack.116lpi.1200dpi/116 lpi / 1200 dpi: "45.0"\r
990 *ColorSepScreenAngle CustomColor.116lpi.1200dpi/116 lpi / 1200 dpi: "45.0"\r
991 *ColorSepScreenAngle ProcessCyan.116lpi.1200dpi/116 lpi / 1200 dpi: "71.5651"\r
992 *ColorSepScreenAngle ProcessMagenta.116lpi.1200dpi/116 lpi / 1200 dpi: "18.4349"\r
993 *ColorSepScreenAngle ProcessYellow.116lpi.1200dpi/116 lpi / 1200 dpi: "0.0"\r
994 \r
995 *ColorSepScreenFreq ProcessBlack.116lpi.1200dpi/116 lpi / 1200 dpi: "106.066"\r
996 *ColorSepScreenFreq CustomColor.116lpi.1200dpi/116 lpi / 1200 dpi: "106.066"\r
997 *ColorSepScreenFreq ProcessCyan.116lpi.1200dpi/116 lpi / 1200 dpi: "94.8683"\r
998 *ColorSepScreenFreq ProcessMagenta.116lpi.1200dpi/116 lpi / 1200 dpi: "94.8683"\r
999 *ColorSepScreenFreq ProcessYellow.116lpi.1200dpi/116 lpi / 1200 dpi: "100.0"\r
1000 \r
1001 *% End of PPD file for Lexmark Optra Laser Printer