target/aarch64/Makefile

   1 # This file is part of the OpenADK project. OpenADK is copyrighted
   2 # material, please see the LICENCE file in the top-level directory.
   3
   4 include $(ADK_TOPDIR)/rules.mk
   5 include $(ADK_TOPDIR)/mk/kernel-build.mk
   6 include $(ADK_TOPDIR)/mk/image.mk
   7
   8 KERNEL:=${LINUX_DIR}/arch/arm64/boot/Image
   9
  10 QEMU_ARGS:=${ADK_QEMU_ARGS}
  11 QEMU_ARGS+=-M virt -cpu cortex-a57 -smp 1
  12 ifeq ($(ADK_TARGET_QEMU_WITH_VIRTIO),y)
  13 QEMU_ARGS+=-netdev user,id=eth0 -device virtio-net-device,netdev=eth0
  14 endif
  15 ifeq ($(ADK_TARGET_FS),archive)
  16 QEMU_ARGS+=-device virtio-blk-device,drive=vda -drive file=qemu-${ADK_TARGET_CPU_ARCH}.img,if=none,id=vda,format=raw
  17 endif
  18
  19 # target helper text
  20 ifeq ($(ADK_TARGET_FS),archive)
  21 targethelp:
  22         @echo "The RootFS tarball is: $(FW_DIR)/$(ROOTFSTARBALL)"
  23 ifeq ($(ADK_TARGET_BOARD_BCM28XX),y)
  24         @echo "Use following command to install it on SD card:"
  25         @echo "sudo ./scripts/install.sh $(ADK_TARGET_SYSTEM) /dev/sdX $(FW_DIR)/$(ROOTFSTARBALL)"
  26 endif
  27 ifeq ($(ADK_TARGET_SYSTEM_ROCKPI4_PLUS)$(ADK_TARGET_SYSTEM_RASPBERRY_PI5),y)
  28 ifeq ($(ADK_RUNTIME_DATA_PARTITION),y)
  29         @echo "Use following command to install with a writable data partition"
  30         @echo "sudo ./scripts/install.sh -d 256 $(ADK_TARGET_SYSTEM) /dev/sdX $(FW_DIR)/$(ROOTFSTARBALL)"
  31         @echo "If you want to update a card without loosing existing data on the writable partition use:"
  32         @echo "sudo ./scripts/install.sh -k -d 256 $(ADK_TARGET_SYSTEM) /dev/sdX $(FW_DIR)/$(ROOTFSTARBALL)"
  33         @echo "In both cases the cfgfs partition is _not_ removed!"
  34 else
  35         @echo "Use following command to install it on SD card:"
  36         @echo "sudo ./scripts/install.sh $(ADK_TARGET_SYSTEM) /dev/sdX $(FW_DIR)/$(ROOTFSTARBALL)"
  37 endif
  38 endif
  39 ifeq ($(ADK_TARGET_QEMU),y)
  40         @echo 'The kernel file is: $(FW_DIR)/${TARGET_KERNEL}'
  41         @echo "Use following command to create a QEMU Image:"
  42         @echo "./scripts/create.sh qemu-${ADK_TARGET_CPU_ARCH}.img $(FW_DIR)/$(ROOTFSTARBALL)"
  43         @echo "Start qemu with following options:"
  44         @echo 'qemu-system-${ADK_TARGET_CPU_ARCH} ${QEMU_ARGS} -kernel $(FW_DIR)/$(TARGET_KERNEL)'
  45 endif
  46 endif
  47 ifeq ($(ADK_TARGET_FS),initramfs)
  48 targethelp:
  49         @echo 'The kernel file is: $(FW_DIR)/${TARGET_KERNEL}'
  50         @echo 'The initramfs image is: ${FW_DIR}/${INITRAMFS}'
  51 ifeq ($(ADK_TARGET_QEMU),y)
  52         @echo "Start qemu with following command line:"
  53         @echo 'qemu-system-${ADK_TARGET_CPU_ARCH} ${QEMU_ARGS} -kernel $(FW_DIR)/$(TARGET_KERNEL) -initrd ${FW_DIR}/${INITRAMFS}'
  54 endif
  55 endif
  56 ifeq ($(ADK_TARGET_FS),initramfsarchive)
  57 targethelp:
  58         @echo 'The kernel file is: $(FW_DIR)/${TARGET_KERNEL}'
  59         @echo "The RootFS tarball is: $(FW_DIR)/$(ROOTFSUSERTARBALL)"
  60 endif
  61 ifeq ($(ADK_TARGET_FS),initramfspiggyback)
  62 targethelp:
  63         @echo 'The kernel+initramfs file is: $(FW_DIR)/${TARGET_KERNEL}'
  64 ifeq ($(ADK_TARGET_QEMU),y)
  65         @echo "Start qemu with following command line:"
  66         @echo 'qemu-system-${ADK_TARGET_CPU_ARCH} ${QEMU_ARGS} -kernel $(FW_DIR)/$(TARGET_KERNEL)'
  67 endif
  68 endif
  69 ifeq ($(ADK_TARGET_FS),nfsroot)
  70 targethelp:
  71         @echo 'The kernel file is: $(FW_DIR)/${TARGET_KERNEL}'
  72         @echo "The RootFS tarball is: $(FW_DIR)/$(ROOTFSUSERTARBALL)"
  73 endif
  74 ifeq ($(ADK_TARGET_FS),genimage)
  75 targethelp:
  76         @echo "The disk image is: $(FW_DIR)/sdcard.img"
  77         @echo "Use following command to install it on SD card:"
  78         @echo 'sudo dd if=$(FW_DIR)/sdcard.img of=/dev/sdX bs=2048k'
  79 endif
  80 ifeq ($(ADK_TARGET_FS),nfsroot)
  81 imageinstall: kernel-install $(FW_DIR)/$(ROOTFSUSERTARBALL) targethelp
  82 endif
  83
  84 kernel-strip:
  85         @cp $(KERNEL) $(BUILD_DIR)/$(TARGET_KERNEL)
  86
  87 kernel-install: kernel-strip
  88         @cp $(BUILD_DIR)/$(TARGET_KERNEL) $(FW_DIR)/$(TARGET_KERNEL)
  89
  90 dtb-install:
  91 ifeq ($(ADK_TARGET_BOARD_BCM28XX),y)
  92         ${KERNEL_MAKE} dtbs $(MAKE_TRACE)
  93         mkdir -p $(FW_DIR)/overlays
  94         for x in $(LINUX_DIR)/arch/arm64/boot/dts/overlays/*.dtbo; do \
  95                 [[ -e "$$x" ]] && cp $(LINUX_DIR)/arch/arm64/boot/dts/overlays/*.dtbo $(FW_DIR)/overlays; \
  96                 break; \
  97         done
  98         for x in $(LINUX_DIR)/arch/arm64/boot/dts/broadcom/*.dtb; do \
  99                 [[ -e "$$x" ]] && cp $(LINUX_DIR)/arch/arm64/boot/dts/broadcom/*.dtb $(FW_DIR); \
 100                 break; \
 101         done
 102 endif
 103 ifeq ($(ADK_TARGET_SYSTEM_ROCKPI4_PLUS),y)
 104         ${KERNEL_MAKE} rockchip/rk3399-rock-pi-4b-plus.dtb $(MAKE_TRACE)
 105 endif
 106         for x in $(LINUX_DIR)/arch/arm64/boot/dts/*/*.dtb; do \
 107                 [[ -e "$$x" ]] && cp $(LINUX_DIR)/arch/arm64/boot/dts/*/*.dtb $(FW_DIR); \
 108                 break; \
 109         done
 110
 111 # filesystem specific targets
 112 ifeq ($(ADK_TARGET_FS),archive)
 113 imageinstall: dtb-install $(FW_DIR)/$(ROOTFSTARBALL) targethelp
 114 endif
 115 ifeq ($(ADK_TARGET_FS),initramfs)
 116 imageinstall: kernel-install $(FW_DIR)/$(INITRAMFS) targethelp
 117 endif
 118 ifeq ($(ADK_TARGET_FS),initramfsarchive)
 119 imageinstall: kernel-install $(FW_DIR)/$(ROOTFSUSERTARBALL) targethelp
 120 endif
 121 ifeq ($(ADK_TARGET_FS),initramfspiggyback)
 122 imageinstall: createinitramfs targethelp
 123 endif
 124 ifeq ($(ADK_TARGET_FS),genimage)
 125 imageinstall: dtb-install $(FW_DIR)/$(GENIMAGE) targethelp
 126 endif