package/brcmfmac-firmware/src/brcm/brcmfmac43430-sdio.txt

   1 # NVRAM file for BCM943430WLSELG
   2 # 2.4 GHz, 20 MHz BW mode
   3
   4 # The following parameter values are just placeholders, need to be updated.
   5 manfid=0x2d0
   6 prodid=0x0726
   7 vendid=0x14e4
   8 devid=0x43e2
   9 boardtype=0x0726
  10 boardrev=0x1202
  11 boardnum=22
  12 macaddr=00:90:4c:c5:12:38
  13 sromrev=11
  14 boardflags=0x00404201
  15 boardflags3=0x08000000
  16 xtalfreq=37400
  17 #xtalfreq=19200
  18 nocrc=1
  19 ag0=255
  20 aa2g=1
  21 ccode=ALL
  22
  23 pa0itssit=0x20
  24 extpagain2g=0
  25
  26 #PA parameters for 2.4GHz, measured at CHIP OUTPUT
  27 pa2ga0=-168,7161,-820
  28 AvVmid_c0=0x0,0xc8
  29 cckpwroffset0=5
  30
  31 # PPR params
  32 maxp2ga0=84
  33 txpwrbckof=6
  34 cckbw202gpo=0
  35 legofdmbw202gpo=0x66111111
  36 mcsbw202gpo=0x77711111
  37 propbw202gpo=0xdd
  38
  39 # OFDM IIR :
  40 ofdmdigfilttype=18
  41 ofdmdigfilttypebe=18
  42 # PAPD mode:
  43 papdmode=1
  44 papdvalidtest=1
  45 pacalidx2g=32
  46 papdepsoffset=-36
  47 papdendidx=61
  48
  49 il0macaddr=00:90:4c:c5:12:38
  50 wl0id=0x431b
  51
  52 deadman_to=0xffffffff
  53 # muxenab: 0x1 for UART enable, 0x2 for GPIOs, 0x8 for JTAG
  54 muxenab=0x1
  55 # CLDO PWM voltage settings - 0x4 - 1.1 volt
  56 #cldo_pwm=0x4
  57
  58 #VCO freq 326.4MHz
  59 spurconfig=0x3
  60
  61 # Improved Bluetooth coexistence parameters from Cypress
  62 btc_mode=1
  63 btc_params8=0x4e20
  64 btc_params1=0x7530