odeviced-old/autogen.sh

   1 #!/bin/sh
   2 # Run this to generate all the initial makefiles, etc.
   3
   4 #name of package
   5 PKG_NAME=odeviced
   6 srcdir=${srcdir:-.}
   7
   8 # default version requirements ...
   9 REQUIRED_AUTOCONF_VERSION=${REQUIRED_AUTOCONF_VERSION:-2.53}
  10 REQUIRED_AUTOMAKE_VERSION=${REQUIRED_AUTOMAKE_VERSION:-1.9}
  11 REQUIRED_LIBTOOL_VERSION=${REQUIRED_LIBTOOL_VERSION:-1.4.3}
  12 REQUIRED_GETTEXT_VERSION=${REQUIRED_GETTEXT_VERSION:-0.10.40}
  13 REQUIRED_GLIB_GETTEXT_VERSION=${REQUIRED_GLIB_GETTEXT_VERSION:-2.2.0}
  14 REQUIRED_INTLTOOL_VERSION=${REQUIRED_INTLTOOL_VERSION:-0.25}
  15 REQUIRED_PKG_CONFIG_VERSION=${REQUIRED_PKG_CONFIG_VERSION:-0.14.0}
  16 REQUIRED_GTK_DOC_VERSION=${REQUIRED_GTK_DOC_VERSION:-1.0}
  17 REQUIRED_DOC_COMMON_VERSION=${REQUIRED_DOC_COMMON_VERSION:-2.3.0}
  18 REQUIRED_GNOME_DOC_UTILS_VERSION=${REQUIRED_GNOME_DOC_UTILS_VERSION:-0.4.2}
  19
  20 # a list of required m4 macros.  Package can set an initial value
  21 REQUIRED_M4MACROS=${REQUIRED_M4MACROS:-}
  22 FORBIDDEN_M4MACROS=${FORBIDDEN_M4MACROS:-}
  23
  24 # Not all echo versions allow -n, so we check what is possible. This test is
  25 # based on the one in autoconf.
  26 ECHO_C=
  27 ECHO_N=
  28 case `echo -n x` in
  29 -n*)
  30   case `echo 'x\c'` in
  31   *c*) ;;
  32   *)   ECHO_C='\c';;
  33   esac;;
  34 *)
  35   ECHO_N='-n';;
  36 esac
  37
  38 # some terminal codes ...
  39 boldface="`tput bold 2>/dev/null`"
  40 normal="`tput sgr0 2>/dev/null`"
  41 printbold() {
  42     echo $ECHO_N "$boldface" $ECHO_C
  43     echo "$@"
  44     echo $ECHO_N "$normal" $ECHO_C
  45 }
  46 printerr() {
  47     echo "$@" >&2
  48 }
  49
  50 # Usage:
  51 #     compare_versions MIN_VERSION ACTUAL_VERSION
  52 # returns true if ACTUAL_VERSION >= MIN_VERSION
  53 compare_versions() {
  54     ch_min_version=$1
  55     ch_actual_version=$2
  56     ch_status=0
  57     IFS="${IFS=         }"; ch_save_IFS="$IFS"; IFS="."
  58     set $ch_actual_version
  59     for ch_min in $ch_min_version; do
  60         ch_cur=`echo $1 | sed 's/[^0-9].*$//'`; shift # remove letter suffixes
  61         if [ -z "$ch_min" ]; then break; fi
  62         if [ -z "$ch_cur" ]; then ch_status=1; break; fi
  63         if [ $ch_cur -gt $ch_min ]; then break; fi
  64         if [ $ch_cur -lt $ch_min ]; then ch_status=1; break; fi
  65     done
  66     IFS="$ch_save_IFS"
  67     return $ch_status
  68 }
  69
  70 # Usage:
  71 #     version_check PACKAGE VARIABLE CHECKPROGS MIN_VERSION SOURCE
  72 # checks to see if the package is available
  73 version_check() {
  74     vc_package=$1
  75     vc_variable=$2
  76     vc_checkprogs=$3
  77     vc_min_version=$4
  78     vc_source=$5
  79     vc_status=1
  80
  81     vc_checkprog=`eval echo "\\$$vc_variable"`
  82     if [ -n "$vc_checkprog" ]; then
  83         printbold "using $vc_checkprog for $vc_package"
  84         return 0
  85     fi
  86
  87     if test "x$vc_package" = "xautomake" -a "x$vc_min_version" = "x1.4"; then
  88         vc_comparator="="
  89     else
  90         vc_comparator=">="
  91     fi
  92     printbold "checking for $vc_package $vc_comparator $vc_min_version..."
  93     for vc_checkprog in $vc_checkprogs; do
  94         echo $ECHO_N "  testing $vc_checkprog... " $ECHO_C
  95         if $vc_checkprog --version < /dev/null > /dev/null 2>&1; then
  96             vc_actual_version=`$vc_checkprog --version | head -n 1 | \
  97                                sed 's/^.*[      ]\([0-9.]*[a-z]*\).*$/\1/'`
  98             if compare_versions $vc_min_version $vc_actual_version; then
  99                 echo "found $vc_actual_version"
 100                 # set variables
 101                 eval "$vc_variable=$vc_checkprog; \
 102                         ${vc_variable}_VERSION=$vc_actual_version"
 103                 vc_status=0
 104                 break
 105             else
 106                 echo "too old (found version $vc_actual_version)"
 107             fi
 108         else
 109             echo "not found."
 110         fi
 111     done
 112     if [ "$vc_status" != 0 ]; then
 113         printerr "***Error***: You must have $vc_package $vc_comparator $vc_min_version installed"
 114         printerr "  to build $PKG_NAME.  Download the appropriate package for"
 115         printerr "  from your distribution or get the source tarball at"
 116         printerr "    $vc_source"
 117         printerr
 118     fi
 119     return $vc_status
 120 }
 121
 122 # Usage:
 123 #     require_m4macro filename.m4
 124 # adds filename.m4 to the list of required macros
 125 require_m4macro() {
 126     case "$REQUIRED_M4MACROS" in
 127         $1\ * | *\ $1\ * | *\ $1) ;;
 128         *) REQUIRED_M4MACROS="$REQUIRED_M4MACROS $1" ;;
 129     esac
 130 }
 131
 132 forbid_m4macro() {
 133     case "$FORBIDDEN_M4MACROS" in
 134         $1\ * | *\ $1\ * | *\ $1) ;;
 135         *) FORBIDDEN_M4MACROS="$FORBIDDEN_M4MACROS $1" ;;
 136     esac
 137 }
 138
 139 # Usage:
 140 #     add_to_cm_macrodirs dirname
 141 # Adds the dir to $cm_macrodirs, if it's not there yet.
 142 add_to_cm_macrodirs() {
 143     case $cm_macrodirs in
 144     "$1 "* | *" $1 "* | *" $1") ;;
 145     *) cm_macrodirs="$cm_macrodirs $1";;
 146     esac
 147 }
 148
 149 # Usage:
 150 #     print_m4macros_error
 151 # Prints an error message saying that autoconf macros were misused
 152 print_m4macros_error() {
 153     printerr "***Error***: some autoconf macros required to build $PKG_NAME"
 154     printerr "  were not found in your aclocal path, or some forbidden"
 155     printerr "  macros were found.  Perhaps you need to adjust your"
 156     printerr "  ACLOCAL_FLAGS?"
 157     printerr
 158 }
 159
 160 # Usage:
 161 #     check_m4macros
 162 # Checks that all the requested macro files are in the aclocal macro path
 163 # Uses REQUIRED_M4MACROS and ACLOCAL variables.
 164 check_m4macros() {
 165     # construct list of macro directories
 166     cm_macrodirs=`$ACLOCAL --print-ac-dir`
 167     # aclocal also searches a version specific dir, eg. /usr/share/aclocal-1.9
 168     # but it contains only Automake's own macros, so we can ignore it.
 169
 170     # Read the dirlist file, supported by Automake >= 1.7.
 171     if compare_versions 1.7 $AUTOMAKE_VERSION && [ -s $cm_macrodirs/dirlist ]; then
 172         cm_dirlist=`sed 's/[    ]*#.*//;/^$/d' $cm_macrodirs/dirlist`
 173         if [ -n "$cm_dirlist" ] ; then
 174             for cm_dir in $cm_dirlist; do
 175                 if [ -d $cm_dir ]; then
 176                     add_to_cm_macrodirs $cm_dir
 177                 fi
 178             done
 179         fi
 180     fi
 181
 182     # Parse $ACLOCAL_FLAGS
 183     set - $ACLOCAL_FLAGS
 184     while [ $# -gt 0 ]; do
 185         if [ "$1" = "-I" ]; then
 186             add_to_cm_macrodirs "$2"
 187             shift
 188         fi
 189         shift
 190     done
 191
 192     cm_status=0
 193     if [ -n "$REQUIRED_M4MACROS" ]; then
 194         printbold "Checking for required M4 macros..."
 195         # check that each macro file is in one of the macro dirs
 196         for cm_macro in $REQUIRED_M4MACROS; do
 197             cm_macrofound=false
 198             for cm_dir in $cm_macrodirs; do
 199                 if [ -f "$cm_dir/$cm_macro" ]; then
 200                     cm_macrofound=true
 201                     break
 202                 fi
 203                 # The macro dir in Cygwin environments may contain a file
 204                 # called dirlist containing other directories to look in.
 205                 if [ -f "$cm_dir/dirlist" ]; then
 206                     for cm_otherdir in `cat $cm_dir/dirlist`; do
 207                         if [ -f "$cm_otherdir/$cm_macro" ]; then
 208                             cm_macrofound=true
 209                             break
 210                         fi
 211                     done
 212                 fi
 213             done
 214             if $cm_macrofound; then
 215                 :
 216             else
 217                 printerr "  $cm_macro not found"
 218                 cm_status=1
 219             fi
 220         done
 221     fi
 222     if [ "$cm_status" != 0 ]; then
 223         print_m4macros_error
 224         return $cm_status
 225     fi
 226     if [ -n "$FORBIDDEN_M4MACROS" ]; then
 227         printbold "Checking for forbidden M4 macros..."
 228         # check that each macro file is in one of the macro dirs
 229         for cm_macro in $FORBIDDEN_M4MACROS; do
 230             cm_macrofound=false
 231             for cm_dir in $cm_macrodirs; do
 232                 if [ -f "$cm_dir/$cm_macro" ]; then
 233                     cm_macrofound=true
 234                     break
 235                 fi
 236             done
 237             if $cm_macrofound; then
 238                 printerr "  $cm_macro found (should be cleared from macros dir)"
 239                 cm_status=1
 240             fi
 241         done
 242     fi
 243     if [ "$cm_status" != 0 ]; then
 244         print_m4macros_error
 245     fi
 246     return $cm_status
 247 }
 248
 249 # try to catch the case where the macros2/ directory hasn't been cleared out.
 250 forbid_m4macro gnome-cxx-check.m4
 251
 252 want_libtool=false
 253 want_gettext=false
 254 want_glib_gettext=false
 255 want_intltool=false
 256 want_pkg_config=false
 257 want_gtk_doc=false
 258 want_gnome_doc_utils=false
 259
 260 configure_files="`find $srcdir -name '{arch}' -prune -o -name '_darcs' -prune -o -name '.??*' -prune -o -name configure.ac -print -o -name configure.in -print`"
 261 for configure_ac in $configure_files; do
 262     dirname=`dirname $configure_ac`
 263     if [ -f $dirname/NO-AUTO-GEN ]; then
 264         echo skipping $dirname -- flagged as no auto-gen
 265         continue
 266     fi
 267     if grep "^A[CM]_PROG_LIBTOOL" $configure_ac >/dev/null ||
 268        grep "^LT_INIT" $configure_ac >/dev/null; then
 269         want_libtool=true
 270     fi
 271     if grep "^AM_GNU_GETTEXT" $configure_ac >/dev/null; then
 272         want_gettext=true
 273     fi
 274     if grep "^AM_GLIB_GNU_GETTEXT" $configure_ac >/dev/null; then
 275         want_glib_gettext=true
 276     fi
 277     if grep "^AC_PROG_INTLTOOL" $configure_ac >/dev/null ||
 278        grep "^IT_PROG_INTLTOOL" $configure_ac >/dev/null; then
 279         want_intltool=true
 280     fi
 281     if grep "^PKG_CHECK_MODULES" $configure_ac >/dev/null; then
 282         want_pkg_config=true
 283     fi
 284     if grep "^GTK_DOC_CHECK" $configure_ac >/dev/null; then
 285         want_gtk_doc=true
 286     fi
 287     if grep "^GNOME_DOC_INIT" $configure_ac >/dev/null; then
 288         want_gnome_doc_utils=true
 289     fi
 290
 291     # check to make sure gnome-common macros can be found ...
 292     if grep "^GNOME_COMMON_INIT" $configure_ac >/dev/null ||
 293        grep "^GNOME_DEBUG_CHECK" $configure_ac >/dev/null ||
 294        grep "^GNOME_MAINTAINER_MODE_DEFINES" $configure_ac >/dev/null; then
 295         require_m4macro gnome-common.m4
 296     fi
 297     if grep "^GNOME_COMPILE_WARNINGS" $configure_ac >/dev/null ||
 298        grep "^GNOME_CXX_WARNINGS" $configure_ac >/dev/null; then
 299         require_m4macro gnome-compiler-flags.m4
 300     fi
 301 done
 302
 303 DIE=0
 304
 305 #tell Mandrake autoconf wrapper we want autoconf 2.5x, not 2.13
 306 WANT_AUTOCONF_2_5=1
 307 export WANT_AUTOCONF_2_5
 308 version_check autoconf AUTOCONF 'autoconf2.50 autoconf autoconf-2.53' $REQUIRED_AUTOCONF_VERSION \
 309     "http://ftp.gnu.org/pub/gnu/autoconf/autoconf-$REQUIRED_AUTOCONF_VERSION.tar.gz" || DIE=1
 310 AUTOHEADER=`echo $AUTOCONF | sed s/autoconf/autoheader/`
 311
 312 case $REQUIRED_AUTOMAKE_VERSION in
 313     1.4*) automake_progs="automake-1.4" ;;
 314     1.5*) automake_progs="automake-1.10 automake-1.9 automake-1.8 automake-1.7 automake-1.6 automake-1.5" ;;
 315     1.6*) automake_progs="automake-1.10 automake-1.9 automake-1.8 automake-1.7 automake-1.6" ;;
 316     1.7*) automake_progs="automake-1.10 automake-1.9 automake-1.8 automake-1.7" ;;
 317     1.8*) automake_progs="automake-1.10 automake-1.9 automake-1.8" ;;
 318     1.9*) automake_progs="automake-1.10 automake-1.9" ;;
 319     1.10*) automake_progs="automake-1.10" ;;
 320 esac
 321 version_check automake AUTOMAKE "$automake_progs" $REQUIRED_AUTOMAKE_VERSION \
 322     "http://ftp.gnu.org/pub/gnu/automake/automake-$REQUIRED_AUTOMAKE_VERSION.tar.gz" || DIE=1
 323 ACLOCAL=`echo $AUTOMAKE | sed s/automake/aclocal/`
 324
 325 if $want_libtool; then
 326     version_check libtool LIBTOOLIZE libtoolize $REQUIRED_LIBTOOL_VERSION \
 327         "http://ftp.gnu.org/pub/gnu/libtool/libtool-$REQUIRED_LIBTOOL_VERSION.tar.gz" || DIE=1
 328     require_m4macro libtool.m4
 329 fi
 330
 331 if $want_gettext; then
 332     version_check gettext GETTEXTIZE gettextize $REQUIRED_GETTEXT_VERSION \
 333         "http://ftp.gnu.org/pub/gnu/gettext/gettext-$REQUIRED_GETTEXT_VERSION.tar.gz" || DIE=1
 334     require_m4macro gettext.m4
 335 fi
 336
 337 if $want_glib_gettext; then
 338     version_check glib-gettext GLIB_GETTEXTIZE glib-gettextize $REQUIRED_GLIB_GETTEXT_VERSION \
 339         "ftp://ftp.gtk.org/pub/gtk/v2.2/glib-$REQUIRED_GLIB_GETTEXT_VERSION.tar.gz" || DIE=1
 340     require_m4macro glib-gettext.m4
 341 fi
 342
 343 if $want_intltool; then
 344     version_check intltool INTLTOOLIZE intltoolize $REQUIRED_INTLTOOL_VERSION \
 345         "http://ftp.gnome.org/pub/GNOME/sources/intltool/" || DIE=1
 346     require_m4macro intltool.m4
 347 fi
 348
 349 if $want_pkg_config; then
 350     version_check pkg-config PKG_CONFIG pkg-config $REQUIRED_PKG_CONFIG_VERSION \
 351         "'http://www.freedesktop.org/software/pkgconfig/releases/pkgconfig-$REQUIRED_PKG_CONFIG_VERSION.tar.gz" || DIE=1
 352     require_m4macro pkg.m4
 353 fi
 354
 355 if $want_gtk_doc; then
 356     version_check gtk-doc GTKDOCIZE gtkdocize $REQUIRED_GTK_DOC_VERSION \
 357         "http://ftp.gnome.org/pub/GNOME/sources/gtk-doc/" || DIE=1
 358     require_m4macro gtk-doc.m4
 359 fi
 360
 361 if $want_gnome_doc_utils; then
 362     version_check gnome-doc-utils GNOME_DOC_PREPARE gnome-doc-prepare $REQUIRED_GNOME_DOC_UTILS_VERSION \
 363         "http://ftp.gnome.org/pub/GNOME/sources/gnome-doc-utils/" || DIE=1
 364 fi
 365
 366 if [ "x$USE_COMMON_DOC_BUILD" = "xyes" ]; then
 367     version_check gnome-common DOC_COMMON gnome-doc-common \
 368         $REQUIRED_DOC_COMMON_VERSION " " || DIE=1
 369 fi
 370
 371 check_m4macros || DIE=1
 372
 373 if [ "$DIE" -eq 1 ]; then
 374   exit 1
 375 fi
 376
 377 if [ "$#" = 0 -a "x$NOCONFIGURE" = "x" ]; then
 378   printerr "**Warning**: I am going to run \`configure' with no arguments."
 379   printerr "If you wish to pass any to it, please specify them on the"
 380   printerr \`$0\'" command line."
 381   printerr
 382 fi
 383
 384 topdir=`pwd`
 385 for configure_ac in $configure_files; do
 386     dirname=`dirname $configure_ac`
 387     basename=`basename $configure_ac`
 388     if [ -f $dirname/NO-AUTO-GEN ]; then
 389         echo skipping $dirname -- flagged as no auto-gen
 390     elif [ ! -w $dirname ]; then
 391         echo skipping $dirname -- directory is read only
 392     else
 393         printbold "Processing $configure_ac"
 394         cd $dirname
 395
 396         # Note that the order these tools are called should match what
 397         # autoconf's "autoupdate" package does.  See bug 138584 for
 398         # details.
 399
 400         # programs that might install new macros get run before aclocal
 401         if grep "^A[CM]_PROG_LIBTOOL" $basename >/dev/null ||
 402            grep "^LT_INIT" $basename >/dev/null; then
 403             printbold "Running $LIBTOOLIZE..."
 404             $LIBTOOLIZE --force --copy || exit 1
 405         fi
 406
 407         if grep "^AM_GLIB_GNU_GETTEXT" $basename >/dev/null; then
 408             printbold "Running $GLIB_GETTEXTIZE... Ignore non-fatal messages."
 409             echo "no" | $GLIB_GETTEXTIZE --force --copy || exit 1
 410         elif grep "^AM_GNU_GETTEXT" $basename >/dev/null; then
 411            if grep "^AM_GNU_GETTEXT_VERSION" $basename > /dev/null; then
 412                 printbold "Running autopoint..."
 413                 autopoint --force || exit 1
 414            else
 415                 printbold "Running $GETTEXTIZE... Ignore non-fatal messages."
 416                 echo "no" | $GETTEXTIZE --force --copy || exit 1
 417            fi
 418         fi
 419
 420         if grep "^AC_PROG_INTLTOOL" $basename >/dev/null ||
 421            grep "^IT_PROG_INTLTOOL" $basename >/dev/null; then
 422             printbold "Running $INTLTOOLIZE..."
 423             $INTLTOOLIZE --force --copy --automake || exit 1
 424         fi
 425         if grep "^GTK_DOC_CHECK" $basename >/dev/null; then
 426             printbold "Running $GTKDOCIZE..."
 427             $GTKDOCIZE --copy || exit 1
 428         fi
 429
 430         if [ "x$USE_COMMON_DOC_BUILD" = "xyes" ]; then
 431             printbold "Running gnome-doc-common..."
 432             gnome-doc-common --copy || exit 1
 433         fi
 434         if grep "^GNOME_DOC_INIT" $basename >/dev/null; then
 435             printbold "Running $GNOME_DOC_PREPARE..."
 436             $GNOME_DOC_PREPARE --force --copy || exit 1
 437         fi
 438
 439         # Now run aclocal to pull in any additional macros needed
 440
 441         # if the AC_CONFIG_MACRO_DIR() macro is used, pass that
 442         # directory to aclocal.
 443         m4dir=`cat "$basename" | grep '^AC_CONFIG_MACRO_DIR' | sed -n -e 's/AC_CONFIG_MACRO_DIR(\([^()]*\))/\1/p' | sed -e 's/^\[\(.*\)\]$/\1/' | sed -e 1q`
 444         if [ -n "$m4dir" ]; then
 445             m4dir="-I $m4dir"
 446         fi
 447         printbold "Running $ACLOCAL..."
 448         $ACLOCAL $m4dir $ACLOCAL_FLAGS || exit 1
 449
 450         if grep "GNOME_AUTOGEN_OBSOLETE" aclocal.m4 >/dev/null; then
 451             printerr "*** obsolete gnome macros were used in $configure_ac"
 452         fi
 453
 454         # Now that all the macros are sorted, run autoconf and autoheader ...
 455         printbold "Running $AUTOCONF..."
 456         $AUTOCONF || exit 1
 457         if grep "^A[CM]_CONFIG_HEADER" $basename >/dev/null; then
 458             printbold "Running $AUTOHEADER..."
 459             $AUTOHEADER || exit 1
 460             # this prevents automake from thinking config.h.in is out of
 461             # date, since autoheader doesn't touch the file if it doesn't
 462             # change.
 463             test -f config.h.in && touch config.h.in
 464         fi
 465
 466         # Finally, run automake to create the makefiles ...
 467         printbold "Running $AUTOMAKE..."
 468         if [ -f COPYING ]; then
 469           cp -pf COPYING COPYING.autogen_bak
 470         fi
 471         if [ -f INSTALL ]; then
 472           cp -pf INSTALL INSTALL.autogen_bak
 473         fi
 474         if [ $REQUIRED_AUTOMAKE_VERSION != 1.4 ]; then
 475             $AUTOMAKE --gnu --add-missing --force --copy || exit 1
 476         else
 477             $AUTOMAKE --gnu --add-missing --copy || exit 1
 478         fi
 479         if [ -f COPYING.autogen_bak ]; then
 480           cmp COPYING COPYING.autogen_bak > /dev/null || cp -pf COPYING.autogen_bak COPYING
 481           rm -f COPYING.autogen_bak
 482         fi
 483         if [ -f INSTALL.autogen_bak ]; then
 484           cmp INSTALL INSTALL.autogen_bak > /dev/null || cp -pf INSTALL.autogen_bak INSTALL
 485           rm -f INSTALL.autogen_bak
 486         fi
 487
 488         cd "$topdir"
 489     fi
 490 done
 491
 492 conf_flags="--enable-maintainer-mode"
 493
 494 if test x$NOCONFIGURE = x; then
 495     printbold Running $srcdir/configure $conf_flags "$@" ...
 496     $srcdir/configure $conf_flags "$@" \
 497         && echo Now type \`make\' to compile $PKG_NAME || exit 1
 498 else
 499     echo Skipping configure process.
 500 fi