4 * The contents of this file are subject to the terms of the
5 * Common Development and Distribution License (the "License").
6 * You may not use this file except in compliance with the License.
8 * You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE
9 * or http://www.opensolaris.org/os/licensing.
10 * See the License for the specific language governing permissions
11 * and limitations under the License.
13 * When distributing Covered Code, include this CDDL HEADER in each
14 * file and include the License file at usr/src/OPENSOLARIS.LICENSE.
15 * If applicable, add the following below this CDDL HEADER, with the
16 * fields enclosed by brackets "[]" replaced with your own identifying
17 * information: Portions Copyright [yyyy] [name of copyright owner]
22 * Copyright 2009 Sun Microsystems, Inc. All rights reserved.
23 * Use is subject to license terms.
26 /* Copyright (c) 1984, 1986, 1987, 1988, 1989 AT&T */
27 /* All Rights Reserved */
31 * Data Link Provider Interface, Version 2.0
32 * Refer to document: "STREAMS DLPI Spec", 800-6915-01.
38 #include <sys/types.h>
39 #include <sys/stream.h>
47 #define DLIOC ('D' << 8)
48 #define DLIOCRAW (DLIOC|1) /* M_DATA "raw" mode */
49 #define DLIOCNATIVE (DLIOC|2) /* Native traffic mode */
50 #define DLIOCMARGININFO (DLIOC|3) /* margin size info */
51 #define DLIOCIPNETINFO (DLIOC|4) /* ipnet header */
52 #define DLIOCHDRINFO (DLIOC|10) /* IP fast-path */
53 #define DL_IOC_HDR_INFO DLIOCHDRINFO
55 #define DL_IPNETINFO_VERSION 0x1
57 typedef struct dl_ipnetinfo
{
58 uint8_t dli_version
; /* DL_IPNETINFO_* version */
59 uint8_t dli_ipver
; /* packet IP header version */
60 uint16_t dli_len
; /* length of dl_ipnetinfo_t */
61 uint32_t dli_pad
; /* alignment pad */
62 uint64_t dli_srczone
; /* packet source zone ID (if any) */
63 uint64_t dli_dstzone
; /* packet dest zone ID (if any) */
67 * DLPI revision definition history
69 #define DL_CURRENT_VERSION 0x02 /* current version of dlpi */
70 #define DL_VERSION_2 0x02 /* version of dlpi March 12, 1991 */
73 * Primitives for Local Management Services
75 #define DL_INFO_REQ 0x00 /* Information Req */
76 #define DL_INFO_ACK 0x03 /* Information Ack */
77 #define DL_ATTACH_REQ 0x0b /* Attach a PPA */
78 #define DL_DETACH_REQ 0x0c /* Detach a PPA */
79 #define DL_BIND_REQ 0x01 /* Bind DLSAP address */
80 #define DL_BIND_ACK 0x04 /* DLSAP address bound */
81 #define DL_UNBIND_REQ 0x02 /* Unbind DLSAP address */
82 #define DL_OK_ACK 0x06 /* Success acknowledgment */
83 #define DL_ERROR_ACK 0x05 /* Error acknowledgment */
84 #define DL_SUBS_BIND_REQ 0x1b /* Bind Subsequent DLSAP address */
85 #define DL_SUBS_BIND_ACK 0x1c /* Subsequent DLSAP address bound */
86 #define DL_SUBS_UNBIND_REQ 0x15 /* Subsequent unbind */
87 #define DL_ENABMULTI_REQ 0x1d /* Enable multicast addresses */
88 #define DL_DISABMULTI_REQ 0x1e /* Disable multicast addresses */
89 #define DL_PROMISCON_REQ 0x1f /* Turn on promiscuous mode */
90 #define DL_PROMISCOFF_REQ 0x20 /* Turn off promiscuous mode */
93 * Solaris specific local management
95 #define DL_NOTIFY_REQ 0x100 /* Enable notifications */
96 #define DL_NOTIFY_ACK 0x101 /* Supported notifications */
97 #define DL_NOTIFY_IND 0x102 /* Notification from provider */
98 #define DL_AGGR_REQ 0x103 /* Enable link aggregation */
99 #define DL_AGGR_IND 0x104 /* Result from link aggregation */
100 #define DL_UNAGGR_REQ 0x105 /* Disable link aggregation */
101 #define DL_CAPABILITY_REQ 0x110 /* Capability request */
102 #define DL_CAPABILITY_ACK 0x111 /* Capability ack */
103 #define DL_CONTROL_REQ 0x112 /* Device specific control request */
104 #define DL_CONTROL_ACK 0x113 /* Device specific control ack */
105 #define DL_PASSIVE_REQ 0x114 /* Allow access to aggregated link */
106 #define DL_INTR_MODE_REQ 0x115 /* Request Rx processing in INTR mode */
109 * Primitives used for Connectionless Service
111 #define DL_UNITDATA_REQ 0x07 /* datagram send request */
112 #define DL_UNITDATA_IND 0x08 /* datagram receive indication */
113 #define DL_UDERROR_IND 0x09 /* datagram error indication */
114 #define DL_UDQOS_REQ 0x0a /* set QOS for subsequent datagrams */
117 * Primitives used for Connection-Oriented Service
119 #define DL_CONNECT_REQ 0x0d /* Connect request */
120 #define DL_CONNECT_IND 0x0e /* Incoming connect indication */
121 #define DL_CONNECT_RES 0x0f /* Accept previous connect indication */
122 #define DL_CONNECT_CON 0x10 /* Connection established */
124 #define DL_TOKEN_REQ 0x11 /* Passoff token request */
125 #define DL_TOKEN_ACK 0x12 /* Passoff token ack */
127 #define DL_DISCONNECT_REQ 0x13 /* Disconnect request */
128 #define DL_DISCONNECT_IND 0x14 /* Disconnect indication */
130 #define DL_RESET_REQ 0x17 /* Reset service request */
131 #define DL_RESET_IND 0x18 /* Incoming reset indication */
132 #define DL_RESET_RES 0x19 /* Complete reset processing */
133 #define DL_RESET_CON 0x1a /* Reset processing complete */
136 * Primitives used for Acknowledged Connectionless Service
139 #define DL_DATA_ACK_REQ 0x21 /* data unit transmission request */
140 #define DL_DATA_ACK_IND 0x22 /* Arrival of a command PDU */
141 #define DL_DATA_ACK_STATUS_IND 0x23 /* Status indication of DATA_ACK_REQ */
142 #define DL_REPLY_REQ 0x24 /* Request a DLSDU from the remote */
143 #define DL_REPLY_IND 0x25 /* Arrival of a command PDU */
144 #define DL_REPLY_STATUS_IND 0x26 /* Status indication of REPLY_REQ */
145 #define DL_REPLY_UPDATE_REQ 0x27 /* Hold a DLSDU for transmission */
146 #define DL_REPLY_UPDATE_STATUS_IND 0x28 /* Status of REPLY_UPDATE req */
149 * Primitives used for XID and TEST operations
152 #define DL_XID_REQ 0x29 /* Request to send an XID PDU */
153 #define DL_XID_IND 0x2a /* Arrival of an XID PDU */
154 #define DL_XID_RES 0x2b /* request to send a response XID PDU */
155 #define DL_XID_CON 0x2c /* Arrival of a response XID PDU */
156 #define DL_TEST_REQ 0x2d /* TEST command request */
157 #define DL_TEST_IND 0x2e /* TEST response indication */
158 #define DL_TEST_RES 0x2f /* TEST response */
159 #define DL_TEST_CON 0x30 /* TEST Confirmation */
162 * Primitives to get and set the physical address, and to get
166 #define DL_PHYS_ADDR_REQ 0x31 /* Request to get physical addr */
167 #define DL_PHYS_ADDR_ACK 0x32 /* Return physical addr */
168 #define DL_SET_PHYS_ADDR_REQ 0x33 /* set physical addr */
169 #define DL_GET_STATISTICS_REQ 0x34 /* Request to get statistics */
170 #define DL_GET_STATISTICS_ACK 0x35 /* Return statistics */
176 #define DL_PRIM_INVAL 0xffff /* Invalid DL primitive value */
179 * DLPI interface states
181 #define DL_UNATTACHED 0x04 /* PPA not attached */
182 #define DL_ATTACH_PENDING 0x05 /* Waiting ack of DL_ATTACH_REQ */
183 #define DL_DETACH_PENDING 0x06 /* Waiting ack of DL_DETACH_REQ */
184 #define DL_UNBOUND 0x00 /* PPA attached */
185 #define DL_BIND_PENDING 0x01 /* Waiting ack of DL_BIND_REQ */
186 #define DL_UNBIND_PENDING 0x02 /* Waiting ack of DL_UNBIND_REQ */
187 #define DL_IDLE 0x03 /* DLSAP bound, awaiting use */
188 #define DL_UDQOS_PENDING 0x07 /* Waiting ack of DL_UDQOS_REQ */
189 #define DL_OUTCON_PENDING 0x08 /* awaiting DL_CONN_CON */
190 #define DL_INCON_PENDING 0x09 /* awaiting DL_CONN_RES */
191 #define DL_CONN_RES_PENDING 0x0a /* Waiting ack of DL_CONNECT_RES */
192 #define DL_DATAXFER 0x0b /* connection-oriented data transfer */
193 #define DL_USER_RESET_PENDING 0x0c /* awaiting DL_RESET_CON */
194 #define DL_PROV_RESET_PENDING 0x0d /* awaiting DL_RESET_RES */
195 #define DL_RESET_RES_PENDING 0x0e /* Waiting ack of DL_RESET_RES */
196 #define DL_DISCON8_PENDING 0x0f /* Waiting ack of DL_DISC_REQ */
197 #define DL_DISCON9_PENDING 0x10 /* Waiting ack of DL_DISC_REQ */
198 #define DL_DISCON11_PENDING 0x11 /* Waiting ack of DL_DISC_REQ */
199 #define DL_DISCON12_PENDING 0x12 /* Waiting ack of DL_DISC_REQ */
200 #define DL_DISCON13_PENDING 0x13 /* Waiting ack of DL_DISC_REQ */
201 #define DL_SUBS_BIND_PND 0x14 /* Waiting ack of DL_SUBS_BIND_REQ */
202 #define DL_SUBS_UNBIND_PND 0x15 /* Waiting ack of DL_SUBS_UNBIND_REQ */
206 * DL_ERROR_ACK error return values
208 #define DL_ACCESS 0x02 /* Improper permissions for request */
209 #define DL_BADADDR 0x01 /* DLSAP addr in improper format or invalid */
210 #define DL_BADCORR 0x05 /* Seq number not from outstand DL_CONN_IND */
211 #define DL_BADDATA 0x06 /* User data exceeded provider limit */
212 #define DL_BADPPA 0x08 /* Specified PPA was invalid */
213 #define DL_BADPRIM 0x09 /* Primitive received not known by provider */
214 #define DL_BADQOSPARAM 0x0a /* QOS parameters contained invalid values */
215 #define DL_BADQOSTYPE 0x0b /* QOS structure type is unknown/unsupported */
216 #define DL_BADSAP 0x00 /* Bad LSAP selector */
217 #define DL_BADTOKEN 0x0c /* Token used not an active stream */
218 #define DL_BOUND 0x0d /* Attempted second bind with dl_max_conind */
219 #define DL_INITFAILED 0x0e /* Physical Link initialization failed */
220 #define DL_NOADDR 0x0f /* Provider couldn't allocate alt. address */
221 #define DL_NOTINIT 0x10 /* Physical Link not initialized */
222 #define DL_OUTSTATE 0x03 /* Primitive issued in improper state */
223 #define DL_SYSERR 0x04 /* UNIX system error occurred */
224 #define DL_UNSUPPORTED 0x07 /* Requested serv. not supplied by provider */
225 #define DL_UNDELIVERABLE 0x11 /* Previous data unit could not be delivered */
226 #define DL_NOTSUPPORTED 0x12 /* Primitive is known but not supported */
227 #define DL_TOOMANY 0x13 /* limit exceeded */
228 #define DL_NOTENAB 0x14 /* Promiscuous mode not enabled */
229 #define DL_BUSY 0x15 /* Other streams for PPA in post-attached */
231 #define DL_NOAUTO 0x16 /* Automatic handling XID&TEST not supported */
232 #define DL_NOXIDAUTO 0x17 /* Automatic handling of XID not supported */
233 #define DL_NOTESTAUTO 0x18 /* Automatic handling of TEST not supported */
234 #define DL_XIDAUTO 0x19 /* Automatic handling of XID response */
235 #define DL_TESTAUTO 0x1a /* Automatic handling of TEST response */
236 #define DL_PENDING 0x1b /* pending outstanding connect indications */
239 * DLPI media types supported
241 #define DL_CSMACD 0x0 /* IEEE 802.3 CSMA/CD network */
242 #define DL_TPB 0x1 /* IEEE 802.4 Token Passing Bus */
243 #define DL_TPR 0x2 /* IEEE 802.5 Token Passing Ring */
244 #define DL_METRO 0x3 /* IEEE 802.6 Metro Net */
245 #define DL_ETHER 0x4 /* Ethernet Bus */
246 #define DL_HDLC 0x05 /* ISO HDLC protocol support */
247 #define DL_CHAR 0x06 /* Character Synchronous protocol support */
248 #define DL_CTCA 0x07 /* IBM Channel-to-Channel Adapter */
249 #define DL_FDDI 0x08 /* Fiber Distributed data interface */
250 #define DL_FC 0x10 /* Fibre Channel interface */
251 #define DL_ATM 0x11 /* ATM */
252 #define DL_IPATM 0x12 /* ATM Classical IP interface */
253 #define DL_X25 0x13 /* X.25 LAPB interface */
254 #define DL_ISDN 0x14 /* ISDN interface */
255 #define DL_HIPPI 0x15 /* HIPPI interface */
256 #define DL_100VG 0x16 /* 100 Based VG Ethernet */
257 #define DL_100VGTPR 0x17 /* 100 Based VG Token Ring */
258 #define DL_ETH_CSMA 0x18 /* ISO 8802/3 and Ethernet */
259 #define DL_100BT 0x19 /* 100 Base T */
260 #define DL_IB 0x1a /* Infiniband */
261 #define DL_FRAME 0x0a /* Frame Relay LAPF */
262 #define DL_MPFRAME 0x0b /* Multi-protocol over Frame Relay */
263 #define DL_ASYNC 0x0c /* Character Asynchronous Protocol */
264 #define DL_IPX25 0x0d /* X.25 Classical IP interface */
265 #define DL_LOOP 0x0e /* software loopback */
266 #define DL_OTHER 0x09 /* Any other medium not listed above */
268 * Private media types. These must be above the value 0x80000000 as
269 * stated in the DLPI specification. NOTE: The SUNW_ prefix is used
270 * to denote synthetic DLPI types that are internal to the stack.
272 #define DL_IPV4 0x80000001ul /* IPv4 Tunnel Link */
273 #define DL_IPV6 0x80000002ul /* IPv6 Tunnel Link */
274 #define SUNW_DL_VNI 0x80000003ul /* Virtual network interface */
275 #define DL_WIFI 0x80000004ul /* IEEE 802.11 */
276 #define DL_IPNET 0x80000005ul /* ipnet(7D) link */
277 #define SUNW_DL_IPMP 0x80000006ul /* IPMP stub interface */
280 * DLPI provider service supported.
281 * These must be allowed to be bitwise-OR for dl_service_mode in
284 #define DL_CODLS 0x01 /* support connection-oriented service */
285 #define DL_CLDLS 0x02 /* support connectionless data link service */
286 #define DL_ACLDLS 0x04 /* support acknowledged connectionless serv. */
290 * DLPI provider style.
291 * The DLPI provider style which determines whether a provider
292 * requires a DL_ATTACH_REQ to inform the provider which PPA
293 * user messages should be sent/received on.
295 #define DL_STYLE1 0x0500 /* PPA is implicitly bound by open(2) */
296 #define DL_STYLE2 0x0501 /* PPA must be expl. bound via DL_ATTACH_REQ */
300 * DLPI Originator for Disconnect and Resets
302 #define DL_PROVIDER 0x0700
303 #define DL_USER 0x0701
306 * DLPI Disconnect Reasons
308 #define DL_CONREJ_DEST_UNKNOWN 0x0800
309 #define DL_CONREJ_DEST_UNREACH_PERMANENT 0x0801
310 #define DL_CONREJ_DEST_UNREACH_TRANSIENT 0x0802
311 #define DL_CONREJ_QOS_UNAVAIL_PERMANENT 0x0803
312 #define DL_CONREJ_QOS_UNAVAIL_TRANSIENT 0x0804
313 #define DL_CONREJ_PERMANENT_COND 0x0805
314 #define DL_CONREJ_TRANSIENT_COND 0x0806
315 #define DL_DISC_ABNORMAL_CONDITION 0x0807
316 #define DL_DISC_NORMAL_CONDITION 0x0808
317 #define DL_DISC_PERMANENT_CONDITION 0x0809
318 #define DL_DISC_TRANSIENT_CONDITION 0x080a
319 #define DL_DISC_UNSPECIFIED 0x080b
324 #define DL_RESET_FLOW_CONTROL 0x0900
325 #define DL_RESET_LINK_ERROR 0x0901
326 #define DL_RESET_RESYNCH 0x0902
329 * DLPI status values for acknowledged connectionless data transfer
331 #define DL_CMD_MASK 0x0f /* mask for command portion of status */
332 #define DL_CMD_OK 0x00 /* Command Accepted */
333 #define DL_CMD_RS 0x01 /* Unimplemented or inactivated service */
334 #define DL_CMD_UE 0x05 /* Data Link User interface error */
335 #define DL_CMD_PE 0x06 /* Protocol error */
336 #define DL_CMD_IP 0x07 /* Permanent implementation dependent error */
337 #define DL_CMD_UN 0x09 /* Resources temporarily unavailable */
338 #define DL_CMD_IT 0x0f /* Temporary implementation dependent error */
339 #define DL_RSP_MASK 0xf0 /* mask for response portion of status */
340 #define DL_RSP_OK 0x00 /* Response DLSDU present */
341 #define DL_RSP_RS 0x10 /* Unimplemented or inactivated service */
342 #define DL_RSP_NE 0x30 /* Response DLSDU never submitted */
343 #define DL_RSP_NR 0x40 /* Response DLSDU not requested */
344 #define DL_RSP_UE 0x50 /* Data Link User interface error */
345 #define DL_RSP_IP 0x70 /* Permanent implementation dependent error */
346 #define DL_RSP_UN 0x90 /* Resources temporarily unavailable */
347 #define DL_RSP_IT 0xf0 /* Temporary implementation dependent error */
350 * Service Class values for acknowledged connectionless data transfer
352 #define DL_RQST_RSP 0x01 /* Use acknowledge capability in MAC sublayer */
353 #define DL_RQST_NORSP 0x02 /* No acknowledgement service requested */
356 * DLPI address type definition
358 #define DL_FACT_PHYS_ADDR 0x01 /* factory physical address */
359 #define DL_CURR_PHYS_ADDR 0x02 /* current physical address */
360 #define DL_IPV6_TOKEN 0x03 /* IPv6 interface token */
361 #define DL_IPV6_LINK_LAYER_ADDR 0x04 /* Neighbor Discovery format */
364 * DLPI flag definitions
366 #define DL_POLL_FINAL 0x01 /* indicates poll/final bit set */
369 * XID and TEST responses supported by the provider
371 #define DL_AUTO_XID 0x01 /* provider will respond to XID */
372 #define DL_AUTO_TEST 0x02 /* provider will respond to TEST */
375 * Subsequent bind type
377 #define DL_PEER_BIND 0x01 /* subsequent bind on a peer addr */
378 #define DL_HIERARCHICAL_BIND 0x02 /* subs_bind on a hierarchical addr */
381 * DLPI promiscuous mode definitions
383 #define DL_PROMISC_PHYS 0x01 /* promiscuous mode at phys level */
384 #define DL_PROMISC_SAP 0x02 /* promiscuous mode at sap level */
385 #define DL_PROMISC_MULTI 0x03 /* promiscuous mode for multicast */
388 * DLPI notification codes for DL_NOTIFY primitives.
389 * Bit-wise distinct since DL_NOTIFY_REQ and DL_NOTIFY_ACK carry multiple
390 * notification codes.
392 #define DL_NOTE_PHYS_ADDR 0x0001 /* Physical address change */
393 #define DL_NOTE_PROMISC_ON_PHYS 0x0002 /* DL_PROMISC_PHYS set on ppa */
394 #define DL_NOTE_PROMISC_OFF_PHYS 0x0004 /* DL_PROMISC_PHYS cleared on ppa */
395 #define DL_NOTE_LINK_DOWN 0x0008 /* Link down */
396 #define DL_NOTE_LINK_UP 0x0010 /* Link up */
397 #define DL_NOTE_AGGR_AVAIL 0x0020 /* Link aggregation is available */
398 #define DL_NOTE_AGGR_UNAVAIL 0x0040 /* Link aggregation is not available */
399 #define DL_NOTE_SDU_SIZE 0x0080 /* New SDU size, global or per addr */
400 #define DL_NOTE_SPEED 0x0100 /* Approximate link speed */
401 #define DL_NOTE_FASTPATH_FLUSH 0x0200 /* Fast Path info changes */
402 #define DL_NOTE_CAPAB_RENEG 0x0400 /* Initiate capability renegotiation */
405 * DLPI Quality Of Service definition for use in QOS structure definitions.
406 * The QOS structures are used in connection establishment, DL_INFO_ACK,
407 * and setting connectionless QOS values.
413 * This parameter is specified for both directions.
416 t_scalar_t dl_target_value
; /* bits/second desired */
417 t_scalar_t dl_accept_value
; /* min. ok bits/second */
421 * transit delay specification
423 * This parameter is specified for both directions.
424 * expressed in milliseconds assuming a DLSDU size of 128 octets.
425 * The scaling of the value to the current DLSDU size is provider dependent.
428 t_scalar_t dl_target_value
; /* desired value of service */
429 t_scalar_t dl_accept_value
; /* min. ok value of service */
433 * priority specification
434 * priority range is 0-100, with 0 being highest value.
443 * protection specification
446 #define DL_NONE 0x0B01 /* no protection supplied */
447 #define DL_MONITOR 0x0B02 /* prot. from passive monit. */
448 #define DL_MAXIMUM 0x0B03 /* prot. from modification, replay, */
449 /* addition, or deletion */
458 * Resilience specification
459 * probabilities are scaled by a factor of 10,000 with a time interval
463 t_scalar_t dl_disc_prob
; /* prob. of provider init DISC */
464 t_scalar_t dl_reset_prob
; /* prob. of provider init RESET */
469 * QOS type definition to be used for negotiation with the
470 * remote end of a connection, or a connectionless unitdata request.
471 * There are two type definitions to handle the negotiation
472 * process at connection establishment. The typedef dl_qos_range_t
473 * is used to present a range for parameters. This is used
474 * in the DL_CONNECT_REQ and DL_CONNECT_IND messages. The typedef
475 * dl_qos_sel_t is used to select a specific value for the QOS
476 * parameters. This is used in the DL_CONNECT_RES, DL_CONNECT_CON,
477 * and DL_INFO_ACK messages to define the selected QOS parameters
481 * A DataLink provider which has unknown values for any of the fields
482 * will use a value of DL_UNKNOWN for all values in the fields.
485 * A QOS parameter value of DL_QOS_DONT_CARE informs the DLS
486 * provider the user requesting this value doesn't care
487 * what the QOS parameter is set to. This value becomes the
488 * least possible value in the range of QOS parameters.
489 * The order of the QOS parameter range is then:
491 * DL_QOS_DONT_CARE < 0 < MAXIMUM QOS VALUE
493 #define DL_UNKNOWN -1
494 #define DL_QOS_DONT_CARE -2
497 * Every QOS structure has the first 4 bytes containing a type
498 * field, denoting the definition of the rest of the structure.
499 * This is used in the same manner has the dl_primitive variable
502 * The following list is the defined QOS structure type values and structures.
504 #define DL_QOS_CO_RANGE1 0x0101 /* CO QOS range struct. */
505 #define DL_QOS_CO_SEL1 0x0102 /* CO QOS selection structure */
506 #define DL_QOS_CL_RANGE1 0x0103 /* CL QOS range struct. */
507 #define DL_QOS_CL_SEL1 0x0104 /* CL QOS selection */
510 t_uscalar_t dl_qos_type
;
511 dl_through_t dl_rcv_throughput
; /* desired and accep. */
512 dl_transdelay_t dl_rcv_trans_delay
; /* desired and accep. */
513 dl_through_t dl_xmt_throughput
;
514 dl_transdelay_t dl_xmt_trans_delay
;
515 dl_priority_t dl_priority
; /* min and max values */
516 dl_protect_t dl_protection
; /* min and max values */
517 t_scalar_t dl_residual_error
;
518 dl_resilience_t dl_resilience
;
519 } dl_qos_co_range1_t
;
522 t_uscalar_t dl_qos_type
;
523 t_scalar_t dl_rcv_throughput
;
524 t_scalar_t dl_rcv_trans_delay
;
525 t_scalar_t dl_xmt_throughput
;
526 t_scalar_t dl_xmt_trans_delay
;
527 t_scalar_t dl_priority
;
528 t_scalar_t dl_protection
;
529 t_scalar_t dl_residual_error
;
530 dl_resilience_t dl_resilience
;
534 t_uscalar_t dl_qos_type
;
535 dl_transdelay_t dl_trans_delay
;
536 dl_priority_t dl_priority
;
537 dl_protect_t dl_protection
;
538 t_scalar_t dl_residual_error
;
539 } dl_qos_cl_range1_t
;
542 t_uscalar_t dl_qos_type
;
543 t_scalar_t dl_trans_delay
;
544 t_scalar_t dl_priority
;
545 t_scalar_t dl_protection
;
546 t_scalar_t dl_residual_error
;
550 t_uscalar_t dl_qos_type
;
551 dl_qos_co_range1_t qos_co_range1
;
552 dl_qos_co_sel1_t qos_co_sel1
;
553 dl_qos_cl_range1_t qos_cl_range1
;
554 dl_qos_cl_sel1_t qos_cl_sel1
;
558 * Solaris specific structures and definitions.
562 * The following are the capability types and structures used by the
563 * the DL_CAPABILITY_REQ and DL_CAPABILITY_ACK primitives.
565 * These primitives are used both to determine the set of capabilities in
566 * the DLS provider and also to turn on and off specific capabilities.
567 * The response is a DL_CAPABILITY_ACK or DL_ERROR_ACK.
569 * DL_CAPABILITY_REQ can either be empty (i.e. dl_sub_length is zero) which
570 * is a request for the driver to return all capabilities. Otherwise, the
571 * DL_CAPABILITY_REQ contains the capabilities the DLS user wants to use and
574 * DL_CAPABILITY_ACK contains the capabilities that the DLS provider can
575 * support modified based on what was listed in the request. If a
576 * capability was included in the request then the information returned
577 * in the ack might be modified based on the information in the request.
580 #define DL_CAPAB_ID_WRAPPER 0x00 /* Module ID wrapper structure */
581 /* dl_data is dl_capab_id_t */
582 #define DL_CAPAB_HCKSUM 0x01 /* Checksum offload */
583 /* dl_data is dl_capab_hcksum_t */
584 #define DL_CAPAB_IPSEC_AH 0x02 /* IPsec AH acceleration */
585 /* dl_data is dl_capab_ipsec_t */
586 #define DL_CAPAB_IPSEC_ESP 0x03 /* IPsec ESP acceleration */
587 /* dl_data is dl_capab_ipsec_t */
588 #define DL_CAPAB_MDT 0x04 /* Multidata Transmit capability */
589 /* dl_data is dl_capab_mdt_t */
590 #define DL_CAPAB_ZEROCOPY 0x05 /* Zero-copy capability */
591 /* dl_data is dl_capab_zerocopy_t */
592 #define DL_CAPAB_DLD 0x06 /* dld capability */
593 /* dl_data is dl_capab_dld_t */
596 t_uscalar_t dl_cap
; /* capability type */
597 t_uscalar_t dl_length
; /* length of data following */
598 /* Followed by zero or more bytes of dl_data */
599 } dl_capability_sub_t
;
602 * Definitions and structures needed for DL_CONTROL_REQ and DL_CONTROL_ACK
604 * Extensible message to send down control information to the DLS provider.
605 * The response is a DL_CONTROL_ACK or DL_ERROR_ACK.
607 * Different types of control operations will define different format for the
608 * key and data fields. ADD requires key and data fields; if the <type, key>
609 * matches an already existing entry a DL_ERROR_ACK will be returned. DELETE
610 * requires a key field; if the <type, key> does not exist, a DL_ERROR_ACK
611 * will be returned. FLUSH requires neither a key nor data; it
612 * unconditionally removes all entries for the specified type. GET requires a
613 * key field; the get operation returns the data for the <type, key>. If
614 * <type, key> doesn't exist a DL_ERROR_ACK is returned. UPDATE requires key
615 * and data fields; if <type, key> doesn't exist a DL_ERROR_ACK is returned.
621 #define DL_CO_ADD 0x01 /* Add new entry matching for <type,key> */
622 #define DL_CO_DELETE 0x02 /* Delete the entry matching <type,key> */
623 #define DL_CO_FLUSH 0x03 /* Purge all entries of <type> */
624 #define DL_CO_GET 0x04 /* Get the data for the <type,key> */
625 #define DL_CO_UPDATE 0x05 /* Update the data for <type,key> */
626 #define DL_CO_SET 0x06 /* Add or update as appropriate */
629 * Control types (dl_type field of dl_control_req_t and dl_control_ack_t)
631 #define DL_CT_IPSEC_AH 0x01 /* AH; key=spi,dest_addr; */
632 /* data=keying material */
633 #define DL_CT_IPSEC_ESP 0x02 /* ESP; key=spi,des_taddr; */
634 /* data=keying material */
637 * Module ID token to be included in new sub-capability structures.
638 * Existing sub-capabilities lacking an identification token, e.g. IPSEC
639 * hardware acceleration, need to be encapsulated within the ID sub-
640 * capability. Access to this structure must be done through
641 * dlcapab{set,check}qid().
644 t_uscalar_t mid
[4]; /* private fields */
648 * Module ID wrapper (follows dl_capability_sub_t)
651 dl_mid_t id_mid
; /* module ID token */
652 dl_capability_sub_t id_subcap
; /* sub-capability */
656 * Multidata Transmit sub-capability (follows dl_capability_sub_t)
659 t_uscalar_t mdt_version
; /* interface version */
660 t_uscalar_t mdt_flags
; /* flags */
661 t_uscalar_t mdt_hdr_head
; /* minimum leading header space */
662 t_uscalar_t mdt_hdr_tail
; /* minimum trailing header space */
663 t_uscalar_t mdt_max_pld
; /* maximum doable payload buffers */
664 t_uscalar_t mdt_span_limit
; /* scatter-gather descriptor limit */
665 dl_mid_t mdt_mid
; /* module ID token */
669 * Multidata Transmit revision definition history
671 #define MDT_CURRENT_VERSION 0x02
672 #define MDT_VERSION_2 0x02
677 #define DL_CAPAB_MDT_ENABLE 0x01 /* enable Multidata Transmit */
681 * Used for negotiating different flavors of checksum offload
685 t_uscalar_t hcksum_version
; /* version of data following */
686 t_uscalar_t hcksum_txflags
; /* capabilities on transmit */
687 dl_mid_t hcksum_mid
; /* module ID */
691 * DL_CAPAB_HCKSUM revision definition history
693 #define HCKSUM_CURRENT_VERSION 0x01
694 #define HCKSUM_VERSION_1 0x01
697 * Values for dl_txflags
699 #define HCKSUM_ENABLE 0x01 /* Set to enable hardware checksum */
701 #define HCKSUM_INET_PARTIAL 0x02 /* Partial 1's complement checksum */
703 #define HCKSUM_INET_FULL_V4 0x04 /* Full 1's complement checksum */
704 /* ability for IPv4 packets. */
705 #define HCKSUM_INET_FULL_V6 0x08 /* Full 1's complement checksum */
706 /* ability for IPv6 packets. */
707 #define HCKSUM_IPHDRCKSUM 0x10 /* IPv4 Header checksum offload */
712 * The DL_CAPAB_DLD capability enables the capabilities of gldv3-based drivers
713 * to be negotiated using a function call (dld_capab) instead of using streams.
715 typedef struct dl_capab_dld_s
{
716 t_uscalar_t dld_version
;
717 t_uscalar_t dld_flags
;
719 /* DLD provided information */
721 uintptr_t dld_capab_handle
;
722 dl_mid_t dld_mid
; /* module ID */
725 #define DL_CAPAB_DLD_ENABLE 0x00000001
726 #define DLD_VERSION_1 1
727 #define DLD_CURRENT_VERSION DLD_VERSION_1
732 * Zero-copy sub-capability (follows dl_capability_sub_t)
735 t_uscalar_t zerocopy_version
; /* interface version */
736 t_uscalar_t zerocopy_flags
; /* capability flags */
737 t_uscalar_t reserved
[9]; /* reserved fields */
738 dl_mid_t zerocopy_mid
; /* module ID */
739 } dl_capab_zerocopy_t
;
742 * Zero-copy revision definition history
744 #define ZEROCOPY_CURRENT_VERSION 0x01
745 #define ZEROCOPY_VERSION_1 0x01
748 * Currently supported values of zerocopy_flags
750 #define DL_CAPAB_VMSAFE_MEM 0x01 /* Driver is zero-copy safe */
751 /* wrt VM named buffers on */
755 * DLPI interface primitive definitions.
757 * Each primitive is sent as a stream message. It is possible that
758 * the messages may be viewed as a sequence of bytes that have the
759 * following form without any padding. The structure definition
760 * of the following messages may have to change depending on the
761 * underlying hardware architecture and crossing of a hardware
762 * boundary with a different hardware architecture.
764 * Fields in the primitives having a name of the form
765 * dl_reserved cannot be used and have the value of
766 * binary zero, no bits turned on.
768 * Each message has the name defined followed by the
769 * stream message type (M_PROTO, M_PCPROTO, M_DATA)
773 * LOCAL MANAGEMENT SERVICE PRIMITIVES
777 * DL_INFO_REQ, M_PCPROTO type
780 t_uscalar_t dl_primitive
; /* set to DL_INFO_REQ */
784 * DL_INFO_ACK, M_PCPROTO type
787 t_uscalar_t dl_primitive
; /* set to DL_INFO_ACK */
788 t_uscalar_t dl_max_sdu
; /* Max bytes in a DLSDU */
789 t_uscalar_t dl_min_sdu
; /* Min bytes in a DLSDU */
790 t_uscalar_t dl_addr_length
; /* length of DLSAP address */
791 t_uscalar_t dl_mac_type
; /* type of medium supported */
792 t_uscalar_t dl_reserved
; /* value set to zero */
793 t_uscalar_t dl_current_state
; /* state of DLPI interface */
794 t_scalar_t dl_sap_length
; /* length of DLSAP SAP part */
795 t_uscalar_t dl_service_mode
; /* CO, CL or ACL */
796 t_uscalar_t dl_qos_length
; /* length of qos values */
797 t_uscalar_t dl_qos_offset
; /* offset from start of block */
798 t_uscalar_t dl_qos_range_length
; /* available range of qos */
799 t_uscalar_t dl_qos_range_offset
; /* offset from start of block */
800 t_uscalar_t dl_provider_style
; /* style1 or style2 */
801 t_uscalar_t dl_addr_offset
; /* offset of the DLSAP addr */
802 t_uscalar_t dl_version
; /* version number */
803 t_uscalar_t dl_brdcst_addr_length
; /* length of broadcast addr */
804 t_uscalar_t dl_brdcst_addr_offset
; /* offset from start of block */
805 t_uscalar_t dl_growth
; /* set to zero */
809 * DL_ATTACH_REQ, M_PROTO type
812 t_uscalar_t dl_primitive
; /* set to DL_ATTACH_REQ */
813 t_uscalar_t dl_ppa
; /* id of the PPA */
817 * DL_DETACH_REQ, M_PROTO type
820 t_uscalar_t dl_primitive
; /* set to DL_DETACH_REQ */
824 * DL_BIND_REQ, M_PROTO type
827 t_uscalar_t dl_primitive
; /* set to DL_BIND_REQ */
828 t_uscalar_t dl_sap
; /* info to identify DLSAP addr */
829 t_uscalar_t dl_max_conind
; /* max # of outstanding con_ind */
830 uint16_t dl_service_mode
; /* CO, CL or ACL */
831 uint16_t dl_conn_mgmt
; /* if non-zero, is con-mgmt stream */
832 t_uscalar_t dl_xidtest_flg
; /* auto init. of test and xid */
836 * DL_BIND_ACK, M_PCPROTO type
839 t_uscalar_t dl_primitive
; /* DL_BIND_ACK */
840 t_uscalar_t dl_sap
; /* DLSAP addr info */
841 t_uscalar_t dl_addr_length
; /* length of complete DLSAP addr */
842 t_uscalar_t dl_addr_offset
; /* offset from start of M_PCPROTO */
843 t_uscalar_t dl_max_conind
; /* allowed max. # of con-ind */
844 t_uscalar_t dl_xidtest_flg
; /* responses supported by provider */
848 * DL_SUBS_BIND_REQ, M_PROTO type
851 t_uscalar_t dl_primitive
; /* DL_SUBS_BIND_REQ */
852 t_uscalar_t dl_subs_sap_offset
; /* offset of subs_sap */
853 t_uscalar_t dl_subs_sap_length
; /* length of subs_sap */
854 t_uscalar_t dl_subs_bind_class
; /* peer or hierarchical */
855 } dl_subs_bind_req_t
;
858 * DL_SUBS_BIND_ACK, M_PCPROTO type
861 t_uscalar_t dl_primitive
; /* DL_SUBS_BIND_ACK */
862 t_uscalar_t dl_subs_sap_offset
; /* offset of subs_sap */
863 t_uscalar_t dl_subs_sap_length
; /* length of subs_sap */
864 } dl_subs_bind_ack_t
;
867 * DL_UNBIND_REQ, M_PROTO type
870 t_uscalar_t dl_primitive
; /* DL_UNBIND_REQ */
874 * DL_SUBS_UNBIND_REQ, M_PROTO type
877 t_uscalar_t dl_primitive
; /* DL_SUBS_UNBIND_REQ */
878 t_uscalar_t dl_subs_sap_offset
; /* offset of subs_sap */
879 t_uscalar_t dl_subs_sap_length
; /* length of subs_sap */
880 } dl_subs_unbind_req_t
;
883 * DL_OK_ACK, M_PCPROTO type
886 t_uscalar_t dl_primitive
; /* DL_OK_ACK */
887 t_uscalar_t dl_correct_primitive
; /* primitive acknowledged */
891 * DL_ERROR_ACK, M_PCPROTO type
894 t_uscalar_t dl_primitive
; /* DL_ERROR_ACK */
895 t_uscalar_t dl_error_primitive
; /* primitive in error */
896 t_uscalar_t dl_errno
; /* DLPI error code */
897 t_uscalar_t dl_unix_errno
; /* UNIX system error code */
901 * DL_ENABMULTI_REQ, M_PROTO type
904 t_uscalar_t dl_primitive
; /* DL_ENABMULTI_REQ */
905 t_uscalar_t dl_addr_length
; /* length of multicast address */
906 t_uscalar_t dl_addr_offset
; /* offset from start of M_PROTO block */
907 } dl_enabmulti_req_t
;
910 * DL_DISABMULTI_REQ, M_PROTO type
914 t_uscalar_t dl_primitive
; /* DL_DISABMULTI_REQ */
915 t_uscalar_t dl_addr_length
; /* length of multicast address */
916 t_uscalar_t dl_addr_offset
; /* offset from start of M_PROTO block */
917 } dl_disabmulti_req_t
;
920 * DL_PROMISCON_REQ, M_PROTO type
924 t_uscalar_t dl_primitive
; /* DL_PROMISCON_REQ */
925 t_uscalar_t dl_level
; /* physical,SAP, or ALL multicast */
926 } dl_promiscon_req_t
;
929 * DL_PROMISCOFF_REQ, M_PROTO type
933 t_uscalar_t dl_primitive
; /* DL_PROMISCOFF_REQ */
934 t_uscalar_t dl_level
; /* Physical,SAP, or ALL multicast */
935 } dl_promiscoff_req_t
;
938 * Primitives to get and set the Physical address
942 * DL_PHYS_ADDR_REQ, M_PROTO type
945 t_uscalar_t dl_primitive
; /* DL_PHYS_ADDR_REQ */
946 t_uscalar_t dl_addr_type
; /* factory or current physical addr */
947 } dl_phys_addr_req_t
;
950 * DL_PHYS_ADDR_ACK, M_PCPROTO type
953 t_uscalar_t dl_primitive
; /* DL_PHYS_ADDR_ACK */
954 t_uscalar_t dl_addr_length
; /* length of the physical addr */
955 t_uscalar_t dl_addr_offset
; /* offset from start of block */
956 } dl_phys_addr_ack_t
;
959 * DL_SET_PHYS_ADDR_REQ, M_PROTO type
962 t_uscalar_t dl_primitive
; /* DL_SET_PHYS_ADDR_REQ */
963 t_uscalar_t dl_addr_length
; /* length of physical addr */
964 t_uscalar_t dl_addr_offset
; /* offset from start of block */
965 } dl_set_phys_addr_req_t
;
968 * Primitives to get statistics
972 * DL_GET_STATISTICS_REQ, M_PROTO type
975 t_uscalar_t dl_primitive
; /* DL_GET_STATISTICS_REQ */
976 } dl_get_statistics_req_t
;
979 * DL_GET_STATISTICS_ACK, M_PCPROTO type
982 t_uscalar_t dl_primitive
; /* DL_GET_STATISTICS_ACK */
983 t_uscalar_t dl_stat_length
; /* length of statistics structure */
984 t_uscalar_t dl_stat_offset
; /* offset from start of block */
985 } dl_get_statistics_ack_t
;
988 * Solaris specific local management service primitives
992 * DL_NOTIFY_REQ, M_PROTO type
995 t_uscalar_t dl_primitive
; /* set to DL_NOTIFY_REQ */
996 uint32_t dl_notifications
; /* Requested set of notifications */
997 uint32_t dl_timelimit
; /* In milliseconds */
1001 * DL_NOTIFY_ACK, M_PROTO type
1004 t_uscalar_t dl_primitive
; /* set to DL_NOTIFY_ACK */
1005 uint32_t dl_notifications
; /* Supported set of notifications */
1009 * DL_NOTIFY_IND, M_PROTO type
1012 t_uscalar_t dl_primitive
; /* set to DL_NOTIFY_IND */
1013 uint32_t dl_notification
; /* Which notification? */
1014 uint32_t dl_data
; /* notification specific */
1015 t_uscalar_t dl_addr_length
; /* length of complete DLSAP addr */
1016 t_uscalar_t dl_addr_offset
; /* offset from start of M_PROTO */
1020 * DL_AGGR_REQ, M_PROTO type
1023 t_uscalar_t dl_primitive
; /* set to DL_AGGR_REQ */
1024 uint32_t dl_key
; /* Key identifying the group */
1025 uint32_t dl_port
; /* Identifying the NIC */
1026 t_uscalar_t dl_addr_length
; /* length of PHYS addr addr */
1027 t_uscalar_t dl_addr_offset
; /* offset from start of M_PROTO */
1031 * DL_AGGR_IND, M_PROTO type
1034 t_uscalar_t dl_primitive
; /* set to DL_AGGR_IND */
1035 uint32_t dl_key
; /* Key identifying the group */
1036 uint32_t dl_port
; /* Identifying the NIC */
1037 t_uscalar_t dl_addr_length
; /* length of PHYS addr */
1038 t_uscalar_t dl_addr_offset
; /* offset from start of M_PROTO */
1042 * DL_UNAGGR_REQ, M_PROTO type
1045 t_uscalar_t dl_primitive
; /* set to DL_UNAGGR_REQ */
1046 uint32_t dl_key
; /* Key identifying the group */
1047 uint32_t dl_port
; /* Identifying the NIC */
1048 t_uscalar_t dl_addr_length
; /* length of PHYS addr */
1049 t_uscalar_t dl_addr_offset
; /* offset from start of M_PROTO */
1053 * DL_CAPABILITY_REQ, M_PROTO type
1056 t_uscalar_t dl_primitive
; /* DL_CAPABILITY_REQ */
1057 t_uscalar_t dl_sub_offset
; /* options offset */
1058 t_uscalar_t dl_sub_length
; /* options length */
1059 /* Followed by a list of zero or more dl_capability_sub_t */
1060 } dl_capability_req_t
;
1063 * DL_CAPABILITY_ACK, M_PROTO type
1066 t_uscalar_t dl_primitive
; /* DL_CAPABILITY_ACK */
1067 t_uscalar_t dl_sub_offset
; /* options offset */
1068 t_uscalar_t dl_sub_length
; /* options length */
1069 /* Followed by a list of zero or more dl_capability_sub_t */
1070 } dl_capability_ack_t
;
1073 * DL_CONTROL_REQ, M_PROTO type
1076 t_uscalar_t dl_primitive
; /* DL_CONTROL_REQ */
1077 t_uscalar_t dl_operation
; /* add/delete/purge */
1078 t_uscalar_t dl_type
; /* e.g. AH/ESP/ ... */
1079 t_uscalar_t dl_key_offset
; /* offset of key */
1080 t_uscalar_t dl_key_length
; /* length of key */
1081 t_uscalar_t dl_data_offset
; /* offset of data */
1082 t_uscalar_t dl_data_length
; /* length of data */
1086 * DL_CONTROL_ACK, M_PROTO type
1089 t_uscalar_t dl_primitive
; /* DL_CONTROL_ACK */
1090 t_uscalar_t dl_operation
; /* add/delete/purge */
1091 t_uscalar_t dl_type
; /* e.g. AH/ESP/ ... */
1092 t_uscalar_t dl_key_offset
; /* offset of key */
1093 t_uscalar_t dl_key_length
; /* length of key */
1094 t_uscalar_t dl_data_offset
; /* offset of data */
1095 t_uscalar_t dl_data_length
; /* length of data */
1099 * DL_PASSIVE_REQ, M_PROTO type
1102 t_uscalar_t dl_primitive
;
1106 * DL_INTR_MODE_REQ, M_PROTO type
1109 t_uscalar_t dl_primitive
;
1111 t_uscalar_t dl_imode
; /* intr mode: 0 off 1 on */
1112 } dl_intr_mode_req_t
;
1115 * CONNECTION-ORIENTED SERVICE PRIMITIVES
1119 * DL_CONNECT_REQ, M_PROTO type
1122 t_uscalar_t dl_primitive
; /* DL_CONNECT_REQ */
1123 t_uscalar_t dl_dest_addr_length
; /* len. of DLSAP addr */
1124 t_uscalar_t dl_dest_addr_offset
; /* offset */
1125 t_uscalar_t dl_qos_length
; /* len. of QOS parm val */
1126 t_uscalar_t dl_qos_offset
; /* offset */
1127 t_uscalar_t dl_growth
; /* set to zero */
1131 * DL_CONNECT_IND, M_PROTO type
1134 t_uscalar_t dl_primitive
; /* DL_CONNECT_IND */
1135 t_uscalar_t dl_correlation
; /* provider's correl. token */
1136 t_uscalar_t dl_called_addr_length
; /* length of called address */
1137 t_uscalar_t dl_called_addr_offset
; /* offset from start of block */
1138 t_uscalar_t dl_calling_addr_length
; /* length of calling address */
1139 t_uscalar_t dl_calling_addr_offset
; /* offset from start of block */
1140 t_uscalar_t dl_qos_length
; /* length of qos structure */
1141 t_uscalar_t dl_qos_offset
; /* offset from start of block */
1142 t_uscalar_t dl_growth
; /* set to zero */
1146 * DL_CONNECT_RES, M_PROTO type
1149 t_uscalar_t dl_primitive
; /* DL_CONNECT_RES */
1150 t_uscalar_t dl_correlation
; /* provider's correlation token */
1151 t_uscalar_t dl_resp_token
; /* token of responding stream */
1152 t_uscalar_t dl_qos_length
; /* length of qos structure */
1153 t_uscalar_t dl_qos_offset
; /* offset from start of block */
1154 t_uscalar_t dl_growth
; /* set to zero */
1158 * DL_CONNECT_CON, M_PROTO type
1161 t_uscalar_t dl_primitive
; /* DL_CONNECT_CON */
1162 t_uscalar_t dl_resp_addr_length
; /* responder's address len */
1163 t_uscalar_t dl_resp_addr_offset
; /* offset from start of block */
1164 t_uscalar_t dl_qos_length
; /* length of qos structure */
1165 t_uscalar_t dl_qos_offset
; /* offset from start of block */
1166 t_uscalar_t dl_growth
; /* set to zero */
1170 * DL_TOKEN_REQ, M_PCPROTO type
1173 t_uscalar_t dl_primitive
; /* DL_TOKEN_REQ */
1177 * DL_TOKEN_ACK, M_PCPROTO type
1180 t_uscalar_t dl_primitive
; /* DL_TOKEN_ACK */
1181 t_uscalar_t dl_token
; /* Connection response token */
1185 * DL_DISCONNECT_REQ, M_PROTO type
1188 t_uscalar_t dl_primitive
; /* DL_DISCONNECT_REQ */
1189 t_uscalar_t dl_reason
; /* norm., abnorm., perm. or trans. */
1190 t_uscalar_t dl_correlation
; /* association with connect_ind */
1191 } dl_disconnect_req_t
;
1194 * DL_DISCONNECT_IND, M_PROTO type
1197 t_uscalar_t dl_primitive
; /* DL_DISCONNECT_IND */
1198 t_uscalar_t dl_originator
; /* USER or PROVIDER */
1199 t_uscalar_t dl_reason
; /* permanent or transient */
1200 t_uscalar_t dl_correlation
; /* association with connect_ind */
1201 } dl_disconnect_ind_t
;
1204 * DL_RESET_REQ, M_PROTO type
1207 t_uscalar_t dl_primitive
; /* DL_RESET_REQ */
1211 * DL_RESET_IND, M_PROTO type
1214 t_uscalar_t dl_primitive
; /* DL_RESET_IND */
1215 t_uscalar_t dl_originator
; /* Provider or User */
1216 t_uscalar_t dl_reason
; /* flow control, link error, resync */
1220 * DL_RESET_RES, M_PROTO type
1223 t_uscalar_t dl_primitive
; /* DL_RESET_RES */
1227 * DL_RESET_CON, M_PROTO type
1230 t_uscalar_t dl_primitive
; /* DL_RESET_CON */
1235 * CONNECTIONLESS SERVICE PRIMITIVES
1239 * DL_UNITDATA_REQ, M_PROTO type, with M_DATA block(s)
1242 t_uscalar_t dl_primitive
; /* DL_UNITDATA_REQ */
1243 t_uscalar_t dl_dest_addr_length
; /* DLSAP length of dest. user */
1244 t_uscalar_t dl_dest_addr_offset
; /* offset from start of block */
1245 dl_priority_t dl_priority
; /* priority value */
1246 } dl_unitdata_req_t
;
1249 * DL_UNITDATA_IND, M_PROTO type, with M_DATA block(s)
1252 t_uscalar_t dl_primitive
; /* DL_UNITDATA_IND */
1253 t_uscalar_t dl_dest_addr_length
; /* DLSAP length of dest. user */
1254 t_uscalar_t dl_dest_addr_offset
; /* offset from start of block */
1255 t_uscalar_t dl_src_addr_length
; /* DLSAP addr length sender */
1256 t_uscalar_t dl_src_addr_offset
; /* offset from start of block */
1257 t_uscalar_t dl_group_address
; /* one if multicast/broadcast */
1258 } dl_unitdata_ind_t
;
1261 * DL_UDERROR_IND, M_PROTO type
1262 * (or M_PCPROTO type if LLI-based provider)
1265 t_uscalar_t dl_primitive
; /* DL_UDERROR_IND */
1266 t_uscalar_t dl_dest_addr_length
; /* Destination DLSAP */
1267 t_uscalar_t dl_dest_addr_offset
; /* Offset from start of block */
1268 t_uscalar_t dl_unix_errno
; /* unix system error code */
1269 t_uscalar_t dl_errno
; /* DLPI error code */
1273 * DL_UDQOS_REQ, M_PROTO type
1276 t_uscalar_t dl_primitive
; /* DL_UDQOS_REQ */
1277 t_uscalar_t dl_qos_length
; /* requested qos byte length */
1278 t_uscalar_t dl_qos_offset
; /* offset from start of block */
1282 * Primitives to handle XID and TEST operations
1286 * DL_TEST_REQ, M_PROTO type
1289 t_uscalar_t dl_primitive
; /* DL_TEST_REQ */
1290 t_uscalar_t dl_flag
; /* poll/final */
1291 t_uscalar_t dl_dest_addr_length
; /* DLSAP length of dest. user */
1292 t_uscalar_t dl_dest_addr_offset
; /* offset from start of block */
1296 * DL_TEST_IND, M_PROTO type
1299 t_uscalar_t dl_primitive
; /* DL_TEST_IND */
1300 t_uscalar_t dl_flag
; /* poll/final */
1301 t_uscalar_t dl_dest_addr_length
; /* DLSAP length of dest. user */
1302 t_uscalar_t dl_dest_addr_offset
; /* offset from start of block */
1303 t_uscalar_t dl_src_addr_length
; /* DLSAP length of source */
1304 t_uscalar_t dl_src_addr_offset
; /* offset from start of block */
1308 * DL_TEST_RES, M_PROTO type
1311 t_uscalar_t dl_primitive
; /* DL_TEST_RES */
1312 t_uscalar_t dl_flag
; /* poll/final */
1313 t_uscalar_t dl_dest_addr_length
; /* DLSAP length of dest. user */
1314 t_uscalar_t dl_dest_addr_offset
; /* offset from start of block */
1318 * DL_TEST_CON, M_PROTO type
1321 t_uscalar_t dl_primitive
; /* DL_TEST_CON */
1322 t_uscalar_t dl_flag
; /* poll/final */
1323 t_uscalar_t dl_dest_addr_length
; /* DLSAP length of dest. user */
1324 t_uscalar_t dl_dest_addr_offset
; /* offset from start of block */
1325 t_uscalar_t dl_src_addr_length
; /* DLSAP length of source */
1326 t_uscalar_t dl_src_addr_offset
; /* offset from start of block */
1330 * DL_XID_REQ, M_PROTO type
1333 t_uscalar_t dl_primitive
; /* DL_XID_REQ */
1334 t_uscalar_t dl_flag
; /* poll/final */
1335 t_uscalar_t dl_dest_addr_length
; /* DLSAP length of dest. user */
1336 t_uscalar_t dl_dest_addr_offset
; /* offset from start of block */
1340 * DL_XID_IND, M_PROTO type
1343 t_uscalar_t dl_primitive
; /* DL_XID_IND */
1344 t_uscalar_t dl_flag
; /* poll/final */
1345 t_uscalar_t dl_dest_addr_length
; /* DLSAP length of dest. user */
1346 t_uscalar_t dl_dest_addr_offset
; /* offset from start of block */
1347 t_uscalar_t dl_src_addr_length
; /* DLSAP length of source */
1348 t_uscalar_t dl_src_addr_offset
; /* offset from start of block */
1352 * DL_XID_RES, M_PROTO type
1355 t_uscalar_t dl_primitive
; /* DL_XID_RES */
1356 t_uscalar_t dl_flag
; /* poll/final */
1357 t_uscalar_t dl_dest_addr_length
; /* DLSAP length of dest. user */
1358 t_uscalar_t dl_dest_addr_offset
; /* offset from start of block */
1362 * DL_XID_CON, M_PROTO type
1365 t_uscalar_t dl_primitive
; /* DL_XID_CON */
1366 t_uscalar_t dl_flag
; /* poll/final */
1367 t_uscalar_t dl_dest_addr_length
; /* DLSAP length of dest. user */
1368 t_uscalar_t dl_dest_addr_offset
; /* offset from start of block */
1369 t_uscalar_t dl_src_addr_length
; /* DLSAP length of source */
1370 t_uscalar_t dl_src_addr_offset
; /* offset from start of block */
1374 * ACKNOWLEDGED CONNECTIONLESS SERVICE PRIMITIVES
1378 * DL_DATA_ACK_REQ, M_PROTO type
1381 t_uscalar_t dl_primitive
; /* DL_DATA_ACK_REQ */
1382 t_uscalar_t dl_correlation
; /* User's correlation token */
1383 t_uscalar_t dl_dest_addr_length
; /* length of destination addr */
1384 t_uscalar_t dl_dest_addr_offset
; /* offset from start of block */
1385 t_uscalar_t dl_src_addr_length
; /* length of source address */
1386 t_uscalar_t dl_src_addr_offset
; /* offset from start of block */
1387 t_uscalar_t dl_priority
; /* priority */
1388 t_uscalar_t dl_service_class
; /* DL_RQST_RSP|DL_RQST_NORSP */
1389 } dl_data_ack_req_t
;
1392 * DL_DATA_ACK_IND, M_PROTO type
1395 t_uscalar_t dl_primitive
; /* DL_DATA_ACK_IND */
1396 t_uscalar_t dl_dest_addr_length
; /* length of destination addr */
1397 t_uscalar_t dl_dest_addr_offset
; /* offset from start of block */
1398 t_uscalar_t dl_src_addr_length
; /* length of source address */
1399 t_uscalar_t dl_src_addr_offset
; /* offset from start of block */
1400 t_uscalar_t dl_priority
; /* pri. for data unit transm. */
1401 t_uscalar_t dl_service_class
; /* DL_RQST_RSP|DL_RQST_NORSP */
1402 } dl_data_ack_ind_t
;
1405 * DL_DATA_ACK_STATUS_IND, M_PROTO type
1408 t_uscalar_t dl_primitive
; /* DL_DATA_ACK_STATUS_IND */
1409 t_uscalar_t dl_correlation
; /* User's correlation token */
1410 t_uscalar_t dl_status
; /* success or failure of previous req */
1411 } dl_data_ack_status_ind_t
;
1414 * DL_REPLY_REQ, M_PROTO type
1417 t_uscalar_t dl_primitive
; /* DL_REPLY_REQ */
1418 t_uscalar_t dl_correlation
; /* User's correlation token */
1419 t_uscalar_t dl_dest_addr_length
; /* destination address length */
1420 t_uscalar_t dl_dest_addr_offset
; /* offset from start of block */
1421 t_uscalar_t dl_src_addr_length
; /* source address length */
1422 t_uscalar_t dl_src_addr_offset
; /* offset from start of block */
1423 t_uscalar_t dl_priority
; /* pri for data unit trans. */
1424 t_uscalar_t dl_service_class
;
1428 * DL_REPLY_IND, M_PROTO type
1431 t_uscalar_t dl_primitive
; /* DL_REPLY_IND */
1432 t_uscalar_t dl_dest_addr_length
; /* destination address length */
1433 t_uscalar_t dl_dest_addr_offset
; /* offset from start of block */
1434 t_uscalar_t dl_src_addr_length
; /* length of source address */
1435 t_uscalar_t dl_src_addr_offset
; /* offset from start of block */
1436 t_uscalar_t dl_priority
; /* pri for data unit trans. */
1437 t_uscalar_t dl_service_class
; /* DL_RQST_RSP|DL_RQST_NORSP */
1441 * DL_REPLY_STATUS_IND, M_PROTO type
1444 t_uscalar_t dl_primitive
; /* DL_REPLY_STATUS_IND */
1445 t_uscalar_t dl_correlation
; /* User's correlation token */
1446 t_uscalar_t dl_status
; /* success or failure of previous req */
1447 } dl_reply_status_ind_t
;
1450 * DL_REPLY_UPDATE_REQ, M_PROTO type
1453 t_uscalar_t dl_primitive
; /* DL_REPLY_UPDATE_REQ */
1454 t_uscalar_t dl_correlation
; /* user's correlation token */
1455 t_uscalar_t dl_src_addr_length
; /* length of source address */
1456 t_uscalar_t dl_src_addr_offset
; /* offset from start of block */
1457 } dl_reply_update_req_t
;
1460 * DL_REPLY_UPDATE_STATUS_IND, M_PROTO type
1463 t_uscalar_t dl_primitive
; /* DL_REPLY_UPDATE_STATUS_IND */
1464 t_uscalar_t dl_correlation
; /* User's correlation token */
1465 t_uscalar_t dl_status
; /* success or failure of previous req */
1466 } dl_reply_update_status_ind_t
;
1468 union DL_primitives
{
1469 t_uscalar_t dl_primitive
;
1470 dl_info_req_t info_req
;
1471 dl_info_ack_t info_ack
;
1472 dl_attach_req_t attach_req
;
1473 dl_detach_req_t detach_req
;
1474 dl_bind_req_t bind_req
;
1475 dl_bind_ack_t bind_ack
;
1476 dl_unbind_req_t unbind_req
;
1477 dl_subs_bind_req_t subs_bind_req
;
1478 dl_subs_bind_ack_t subs_bind_ack
;
1479 dl_subs_unbind_req_t subs_unbind_req
;
1481 dl_error_ack_t error_ack
;
1482 dl_connect_req_t connect_req
;
1483 dl_connect_ind_t connect_ind
;
1484 dl_connect_res_t connect_res
;
1485 dl_connect_con_t connect_con
;
1486 dl_token_req_t token_req
;
1487 dl_token_ack_t token_ack
;
1488 dl_disconnect_req_t disconnect_req
;
1489 dl_disconnect_ind_t disconnect_ind
;
1490 dl_reset_req_t reset_req
;
1491 dl_reset_ind_t reset_ind
;
1492 dl_reset_res_t reset_res
;
1493 dl_reset_con_t reset_con
;
1494 dl_unitdata_req_t unitdata_req
;
1495 dl_unitdata_ind_t unitdata_ind
;
1496 dl_uderror_ind_t uderror_ind
;
1497 dl_udqos_req_t udqos_req
;
1498 dl_enabmulti_req_t enabmulti_req
;
1499 dl_disabmulti_req_t disabmulti_req
;
1500 dl_promiscon_req_t promiscon_req
;
1501 dl_promiscoff_req_t promiscoff_req
;
1502 dl_phys_addr_req_t physaddr_req
;
1503 dl_phys_addr_ack_t physaddr_ack
;
1504 dl_set_phys_addr_req_t set_physaddr_req
;
1505 dl_get_statistics_req_t get_statistics_req
;
1506 dl_get_statistics_ack_t get_statistics_ack
;
1507 dl_notify_req_t notify_req
;
1508 dl_notify_ack_t notify_ack
;
1509 dl_notify_ind_t notify_ind
;
1510 dl_aggr_req_t aggr_req
;
1511 dl_aggr_ind_t aggr_ind
;
1512 dl_unaggr_req_t unaggr_req
;
1513 dl_test_req_t test_req
;
1514 dl_test_ind_t test_ind
;
1515 dl_test_res_t test_res
;
1516 dl_test_con_t test_con
;
1517 dl_xid_req_t xid_req
;
1518 dl_xid_ind_t xid_ind
;
1519 dl_xid_res_t xid_res
;
1520 dl_xid_con_t xid_con
;
1521 dl_data_ack_req_t data_ack_req
;
1522 dl_data_ack_ind_t data_ack_ind
;
1523 dl_data_ack_status_ind_t data_ack_status_ind
;
1524 dl_reply_req_t reply_req
;
1525 dl_reply_ind_t reply_ind
;
1526 dl_reply_status_ind_t reply_status_ind
;
1527 dl_reply_update_req_t reply_update_req
;
1528 dl_reply_update_status_ind_t reply_update_status_ind
;
1529 dl_capability_req_t capability_req
;
1530 dl_capability_ack_t capability_ack
;
1531 dl_control_req_t control_req
;
1532 dl_control_ack_t control_ack
;
1533 dl_passive_req_t passive_req
;
1534 dl_intr_mode_req_t intr_mode_req
;
1537 #define DL_INFO_REQ_SIZE sizeof (dl_info_req_t)
1538 #define DL_INFO_ACK_SIZE sizeof (dl_info_ack_t)
1539 #define DL_ATTACH_REQ_SIZE sizeof (dl_attach_req_t)
1540 #define DL_DETACH_REQ_SIZE sizeof (dl_detach_req_t)
1541 #define DL_BIND_REQ_SIZE sizeof (dl_bind_req_t)
1542 #define DL_BIND_ACK_SIZE sizeof (dl_bind_ack_t)
1543 #define DL_UNBIND_REQ_SIZE sizeof (dl_unbind_req_t)
1544 #define DL_SUBS_BIND_REQ_SIZE sizeof (dl_subs_bind_req_t)
1545 #define DL_SUBS_BIND_ACK_SIZE sizeof (dl_subs_bind_ack_t)
1546 #define DL_SUBS_UNBIND_REQ_SIZE sizeof (dl_subs_unbind_req_t)
1547 #define DL_OK_ACK_SIZE sizeof (dl_ok_ack_t)
1548 #define DL_ERROR_ACK_SIZE sizeof (dl_error_ack_t)
1549 #define DL_CONNECT_REQ_SIZE sizeof (dl_connect_req_t)
1550 #define DL_CONNECT_IND_SIZE sizeof (dl_connect_ind_t)
1551 #define DL_CONNECT_RES_SIZE sizeof (dl_connect_res_t)
1552 #define DL_CONNECT_CON_SIZE sizeof (dl_connect_con_t)
1553 #define DL_TOKEN_REQ_SIZE sizeof (dl_token_req_t)
1554 #define DL_TOKEN_ACK_SIZE sizeof (dl_token_ack_t)
1555 #define DL_DISCONNECT_REQ_SIZE sizeof (dl_disconnect_req_t)
1556 #define DL_DISCONNECT_IND_SIZE sizeof (dl_disconnect_ind_t)
1557 #define DL_RESET_REQ_SIZE sizeof (dl_reset_req_t)
1558 #define DL_RESET_IND_SIZE sizeof (dl_reset_ind_t)
1559 #define DL_RESET_RES_SIZE sizeof (dl_reset_res_t)
1560 #define DL_RESET_CON_SIZE sizeof (dl_reset_con_t)
1561 #define DL_UNITDATA_REQ_SIZE sizeof (dl_unitdata_req_t)
1562 #define DL_UNITDATA_IND_SIZE sizeof (dl_unitdata_ind_t)
1563 #define DL_UDERROR_IND_SIZE sizeof (dl_uderror_ind_t)
1564 #define DL_UDQOS_REQ_SIZE sizeof (dl_udqos_req_t)
1565 #define DL_ENABMULTI_REQ_SIZE sizeof (dl_enabmulti_req_t)
1566 #define DL_DISABMULTI_REQ_SIZE sizeof (dl_disabmulti_req_t)
1567 #define DL_PROMISCON_REQ_SIZE sizeof (dl_promiscon_req_t)
1568 #define DL_PROMISCOFF_REQ_SIZE sizeof (dl_promiscoff_req_t)
1569 #define DL_PHYS_ADDR_REQ_SIZE sizeof (dl_phys_addr_req_t)
1570 #define DL_PHYS_ADDR_ACK_SIZE sizeof (dl_phys_addr_ack_t)
1571 #define DL_SET_PHYS_ADDR_REQ_SIZE sizeof (dl_set_phys_addr_req_t)
1572 #define DL_GET_STATISTICS_REQ_SIZE sizeof (dl_get_statistics_req_t)
1573 #define DL_GET_STATISTICS_ACK_SIZE sizeof (dl_get_statistics_ack_t)
1574 #define DL_NOTIFY_REQ_SIZE sizeof (dl_notify_req_t)
1575 #define DL_NOTIFY_ACK_SIZE sizeof (dl_notify_ack_t)
1576 #define DL_NOTIFY_IND_SIZE sizeof (dl_notify_ind_t)
1577 #define DL_AGGR_REQ_SIZE sizeof (dl_aggr_req_t)
1578 #define DL_AGGR_IND_SIZE sizeof (dl_aggr_ind_t)
1579 #define DL_UNAGGR_REQ_SIZE sizeof (dl_unaggr_req_t)
1580 #define DL_XID_REQ_SIZE sizeof (dl_xid_req_t)
1581 #define DL_XID_IND_SIZE sizeof (dl_xid_ind_t)
1582 #define DL_XID_RES_SIZE sizeof (dl_xid_res_t)
1583 #define DL_XID_CON_SIZE sizeof (dl_xid_con_t)
1584 #define DL_TEST_REQ_SIZE sizeof (dl_test_req_t)
1585 #define DL_TEST_IND_SIZE sizeof (dl_test_ind_t)
1586 #define DL_TEST_RES_SIZE sizeof (dl_test_res_t)
1587 #define DL_TEST_CON_SIZE sizeof (dl_test_con_t)
1588 #define DL_DATA_ACK_REQ_SIZE sizeof (dl_data_ack_req_t)
1589 #define DL_DATA_ACK_IND_SIZE sizeof (dl_data_ack_ind_t)
1590 #define DL_DATA_ACK_STATUS_IND_SIZE sizeof (dl_data_ack_status_ind_t)
1591 #define DL_REPLY_REQ_SIZE sizeof (dl_reply_req_t)
1592 #define DL_REPLY_IND_SIZE sizeof (dl_reply_ind_t)
1593 #define DL_REPLY_STATUS_IND_SIZE sizeof (dl_reply_status_ind_t)
1594 #define DL_REPLY_UPDATE_REQ_SIZE sizeof (dl_reply_update_req_t)
1595 #define DL_REPLY_UPDATE_STATUS_IND_SIZE sizeof (dl_reply_update_status_ind_t)
1596 #define DL_CAPABILITY_REQ_SIZE sizeof (dl_capability_req_t)
1597 #define DL_CAPABILITY_ACK_SIZE sizeof (dl_capability_ack_t)
1598 #define DL_CONTROL_REQ_SIZE sizeof (dl_control_req_t)
1599 #define DL_CONTROL_ACK_SIZE sizeof (dl_control_ack_t)
1600 #define DL_PASSIVE_REQ_SIZE sizeof (dl_passive_req_t)
1601 #define DL_INTR_MODE_REQ_SIZE sizeof (dl_intr_mode_req_t)
1605 * DDI DLPI routines; see the appropriate manpage for details.
1607 extern void dlbindack(queue_t
*, mblk_t
*, t_scalar_t
, const void *,
1608 t_uscalar_t
, t_uscalar_t
, t_uscalar_t
);
1609 extern void dlokack(queue_t
*, mblk_t
*, t_uscalar_t
);
1610 extern void dlerrorack(queue_t
*, mblk_t
*, t_uscalar_t
, t_uscalar_t
,
1612 extern void dluderrorind(queue_t
*, mblk_t
*, const void *, t_uscalar_t
,
1613 t_uscalar_t
, t_uscalar_t
);
1614 extern void dlphysaddrack(queue_t
*, mblk_t
*, const void *, t_uscalar_t
);
1617 * All routines that follow are unstable and subject to change.
1619 extern void dlcapabsetqid(dl_mid_t
*, const queue_t
*);
1620 extern boolean_t
dlcapabcheckqid(const dl_mid_t
*, const queue_t
*);
1621 extern void dlnotifyack(queue_t
*, mblk_t
*, uint32_t);
1623 * The ldi_handle_t typedef is in <sys/sunldi.h>, which in turn requires
1624 * <sys/sunddi.h>, which pulls in <sys/cmn_err.h>, which declares kernel
1625 * versions of the printf() functions that conflict with the libc ones.
1626 * This causes conflicts when building MDB modules like ARP that #define
1627 * _KERNEL. So we use `struct __ldi_handle *' instead.
1629 struct __ldi_handle
;
1630 extern int dl_attach(struct __ldi_handle
*, int, dl_error_ack_t
*);
1631 extern int dl_bind(struct __ldi_handle
*, uint_t
, dl_error_ack_t
*);
1632 extern int dl_phys_addr(struct __ldi_handle
*, uchar_t
*, size_t *,
1634 extern int dl_info(struct __ldi_handle
*, dl_info_ack_t
*, uchar_t
*, size_t *,
1636 extern int dl_notify(struct __ldi_handle
*, uint32_t *, dl_error_ack_t
*);
1637 extern const char *dl_errstr(t_uscalar_t
);
1638 extern const char *dl_primstr(t_uscalar_t
);
1639 extern const char *dl_mactypestr(t_uscalar_t
);
1641 #endif /* _KERNEL */
1647 #endif /* _SYS_DLPI_H */