1 /* $OpenBSD: packet.c,v 1.153 2008/05/19 06:14:02 djm Exp $ */
3 * Author: Tatu Ylonen <ylo@cs.hut.fi>
4 * Copyright (c) 1995 Tatu Ylonen <ylo@cs.hut.fi>, Espoo, Finland
6 * This file contains code implementing the packet protocol and communication
7 * with the other side. This same code is used both on client and server side.
9 * As far as I am concerned, the code I have written for this software
10 * can be used freely for any purpose. Any derived versions of this
11 * software must be clearly marked as such, and if the derived work is
12 * incompatible with the protocol description in the RFC file, it must be
13 * called by a name other than "ssh" or "Secure Shell".
16 * SSH2 packet format added by Markus Friedl.
17 * Copyright (c) 2000, 2001 Markus Friedl. All rights reserved.
19 * Redistribution and use in source and binary forms, with or without
20 * modification, are permitted provided that the following conditions
22 * 1. Redistributions of source code must retain the above copyright
23 * notice, this list of conditions and the following disclaimer.
24 * 2. Redistributions in binary form must reproduce the above copyright
25 * notice, this list of conditions and the following disclaimer in the
26 * documentation and/or other materials provided with the distribution.
28 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
29 * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
30 * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
31 * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
32 * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
33 * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
34 * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
35 * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
36 * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
37 * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
42 #include <sys/types.h>
43 #include "openbsd-compat/sys-queue.h"
44 #include <sys/param.h>
45 #include <sys/socket.h>
46 #ifdef HAVE_SYS_TIME_H
47 # include <sys/time.h>
50 #include <netinet/in.h>
51 #include <netinet/ip.h>
52 #include <arpa/inet.h>
88 * This variable contains the file descriptors used for communicating with
89 * the other side. connection_in is used for reading; connection_out for
90 * writing. These can be the same descriptor, in which case it is assumed to
93 static int connection_in
= -1;
94 static int connection_out
= -1;
96 /* Protocol flags for the remote side. */
97 static u_int remote_protocol_flags
= 0;
99 /* Encryption context for receiving data. This is only used for decryption. */
100 static CipherContext receive_context
;
102 /* Encryption context for sending data. This is only used for encryption. */
103 static CipherContext send_context
;
105 /* Buffer for raw input data from the socket. */
108 /* Buffer for raw output data going to the socket. */
111 /* Buffer for the partial outgoing packet being constructed. */
112 static Buffer outgoing_packet
;
114 /* Buffer for the incoming packet currently being processed. */
115 static Buffer incoming_packet
;
117 /* Scratch buffer for packet compression/decompression. */
118 static Buffer compression_buffer
;
119 static int compression_buffer_ready
= 0;
121 /* Flag indicating whether packet compression/decompression is enabled. */
122 static int packet_compression
= 0;
124 /* default maximum packet size */
125 u_int max_packet_size
= 32768;
127 /* Flag indicating whether this module has been initialized. */
128 static int initialized
= 0;
130 /* Set to true if the connection is interactive. */
131 static int interactive_mode
= 0;
133 /* Set to true if we are the server side. */
134 static int server_side
= 0;
136 /* Set to true if we are authenticated. */
137 static int after_authentication
= 0;
139 int keep_alive_timeouts
= 0;
141 /* Session key information for Encryption and MAC */
142 Newkeys
*newkeys
[MODE_MAX
];
143 static struct packet_state
{
149 static u_int64_t max_blocks_in
, max_blocks_out
;
150 static u_int32_t rekey_limit
;
152 /* Session key for protocol v1 */
153 static u_char ssh1_key
[SSH_SESSION_KEY_LENGTH
];
154 static u_int ssh1_keylen
;
156 /* roundup current message to extra_pad bytes */
157 static u_char extra_pad
= 0;
160 TAILQ_ENTRY(packet
) next
;
164 TAILQ_HEAD(, packet
) outgoing
;
167 * Sets the descriptors used for communication. Disables encryption until
168 * packet_set_encryption_key is called.
171 packet_set_connection(int fd_in
, int fd_out
)
173 Cipher
*none
= cipher_by_name("none");
176 fatal("packet_set_connection: cannot load cipher 'none'");
177 connection_in
= fd_in
;
178 connection_out
= fd_out
;
179 cipher_init(&send_context
, none
, (const u_char
*)"",
180 0, NULL
, 0, CIPHER_ENCRYPT
);
181 cipher_init(&receive_context
, none
, (const u_char
*)"",
182 0, NULL
, 0, CIPHER_DECRYPT
);
183 newkeys
[MODE_IN
] = newkeys
[MODE_OUT
] = NULL
;
187 buffer_init(&output
);
188 buffer_init(&outgoing_packet
);
189 buffer_init(&incoming_packet
);
190 TAILQ_INIT(&outgoing
);
194 /* Returns 1 if remote host is connected via socket, 0 if not. */
197 packet_connection_is_on_socket(void)
199 struct sockaddr_storage from
, to
;
200 socklen_t fromlen
, tolen
;
202 /* filedescriptors in and out are the same, so it's a socket */
203 if (connection_in
== connection_out
)
205 fromlen
= sizeof(from
);
206 memset(&from
, 0, sizeof(from
));
207 if (getpeername(connection_in
, (struct sockaddr
*)&from
, &fromlen
) < 0)
210 memset(&to
, 0, sizeof(to
));
211 if (getpeername(connection_out
, (struct sockaddr
*)&to
, &tolen
) < 0)
213 if (fromlen
!= tolen
|| memcmp(&from
, &to
, fromlen
) != 0)
215 if (from
.ss_family
!= AF_INET
&& from
.ss_family
!= AF_INET6
)
221 * Exports an IV from the CipherContext required to export the key
222 * state back from the unprivileged child to the privileged parent
227 packet_get_keyiv(int mode
, u_char
*iv
, u_int len
)
231 if (mode
== MODE_OUT
)
234 cc
= &receive_context
;
236 cipher_get_keyiv(cc
, iv
, len
);
240 packet_get_keycontext(int mode
, u_char
*dat
)
244 if (mode
== MODE_OUT
)
247 cc
= &receive_context
;
249 return (cipher_get_keycontext(cc
, dat
));
253 packet_set_keycontext(int mode
, u_char
*dat
)
257 if (mode
== MODE_OUT
)
260 cc
= &receive_context
;
262 cipher_set_keycontext(cc
, dat
);
266 packet_get_keyiv_len(int mode
)
270 if (mode
== MODE_OUT
)
273 cc
= &receive_context
;
275 return (cipher_get_keyiv_len(cc
));
279 packet_set_iv(int mode
, u_char
*dat
)
283 if (mode
== MODE_OUT
)
286 cc
= &receive_context
;
288 cipher_set_keyiv(cc
, dat
);
292 packet_get_ssh1_cipher(void)
294 return (cipher_get_number(receive_context
.cipher
));
298 packet_get_state(int mode
, u_int32_t
*seqnr
, u_int64_t
*blocks
, u_int32_t
*packets
)
300 struct packet_state
*state
;
302 state
= (mode
== MODE_IN
) ? &p_read
: &p_send
;
303 *seqnr
= state
->seqnr
;
304 *blocks
= state
->blocks
;
305 *packets
= state
->packets
;
309 packet_set_state(int mode
, u_int32_t seqnr
, u_int64_t blocks
, u_int32_t packets
)
311 struct packet_state
*state
;
313 state
= (mode
== MODE_IN
) ? &p_read
: &p_send
;
314 state
->seqnr
= seqnr
;
315 state
->blocks
= blocks
;
316 state
->packets
= packets
;
319 /* returns 1 if connection is via ipv4 */
322 packet_connection_is_ipv4(void)
324 struct sockaddr_storage to
;
325 socklen_t tolen
= sizeof(to
);
327 memset(&to
, 0, sizeof(to
));
328 if (getsockname(connection_out
, (struct sockaddr
*)&to
, &tolen
) < 0)
330 if (to
.ss_family
== AF_INET
)
333 if (to
.ss_family
== AF_INET6
&&
334 IN6_IS_ADDR_V4MAPPED(&((struct sockaddr_in6
*)&to
)->sin6_addr
))
340 /* Sets the connection into non-blocking mode. */
343 packet_set_nonblocking(void)
345 /* Set the socket into non-blocking mode. */
346 set_nonblock(connection_in
);
348 if (connection_out
!= connection_in
)
349 set_nonblock(connection_out
);
352 /* Returns the socket used for reading. */
355 packet_get_connection_in(void)
357 return connection_in
;
360 /* Returns the descriptor used for writing. */
363 packet_get_connection_out(void)
365 return connection_out
;
368 /* Closes the connection and clears and frees internal data structures. */
376 if (connection_in
== connection_out
) {
377 shutdown(connection_out
, SHUT_RDWR
);
378 close(connection_out
);
380 close(connection_in
);
381 close(connection_out
);
384 buffer_free(&output
);
385 buffer_free(&outgoing_packet
);
386 buffer_free(&incoming_packet
);
387 if (compression_buffer_ready
) {
388 buffer_free(&compression_buffer
);
389 buffer_compress_uninit();
391 cipher_cleanup(&send_context
);
392 cipher_cleanup(&receive_context
);
395 /* Sets remote side protocol flags. */
398 packet_set_protocol_flags(u_int protocol_flags
)
400 remote_protocol_flags
= protocol_flags
;
403 /* Returns the remote protocol flags set earlier by the above function. */
406 packet_get_protocol_flags(void)
408 return remote_protocol_flags
;
412 * Starts packet compression from the next packet on in both directions.
413 * Level is compression level 1 (fastest) - 9 (slow, best) as in gzip.
417 packet_init_compression(void)
419 if (compression_buffer_ready
== 1)
421 compression_buffer_ready
= 1;
422 buffer_init(&compression_buffer
);
426 packet_start_compression(int level
)
428 if (packet_compression
&& !compat20
)
429 fatal("Compression already enabled.");
430 packet_compression
= 1;
431 packet_init_compression();
432 buffer_compress_init_send(level
);
433 buffer_compress_init_recv();
437 * Causes any further packets to be encrypted using the given key. The same
438 * key is used for both sending and reception. However, both directions are
439 * encrypted independently of each other.
443 packet_set_encryption_key(const u_char
*key
, u_int keylen
,
446 Cipher
*cipher
= cipher_by_number(number
);
449 fatal("packet_set_encryption_key: unknown cipher number %d", number
);
451 fatal("packet_set_encryption_key: keylen too small: %d", keylen
);
452 if (keylen
> SSH_SESSION_KEY_LENGTH
)
453 fatal("packet_set_encryption_key: keylen too big: %d", keylen
);
454 memcpy(ssh1_key
, key
, keylen
);
455 ssh1_keylen
= keylen
;
456 cipher_init(&send_context
, cipher
, key
, keylen
, NULL
, 0, CIPHER_ENCRYPT
);
457 cipher_init(&receive_context
, cipher
, key
, keylen
, NULL
, 0, CIPHER_DECRYPT
);
461 packet_get_encryption_key(u_char
*key
)
464 return (ssh1_keylen
);
465 memcpy(key
, ssh1_key
, ssh1_keylen
);
466 return (ssh1_keylen
);
469 /* Start constructing a packet to send. */
471 packet_start(u_char type
)
476 DBG(debug("packet_start[%d]", type
));
477 len
= compat20
? 6 : 9;
478 memset(buf
, 0, len
- 1);
480 buffer_clear(&outgoing_packet
);
481 buffer_append(&outgoing_packet
, buf
, len
);
484 /* Append payload. */
486 packet_put_char(int value
)
490 buffer_append(&outgoing_packet
, &ch
, 1);
494 packet_put_int(u_int value
)
496 buffer_put_int(&outgoing_packet
, value
);
500 packet_put_string(const void *buf
, u_int len
)
502 buffer_put_string(&outgoing_packet
, buf
, len
);
506 packet_put_cstring(const char *str
)
508 buffer_put_cstring(&outgoing_packet
, str
);
512 packet_put_raw(const void *buf
, u_int len
)
514 buffer_append(&outgoing_packet
, buf
, len
);
518 packet_put_bignum(BIGNUM
* value
)
520 buffer_put_bignum(&outgoing_packet
, value
);
524 packet_put_bignum2(BIGNUM
* value
)
526 buffer_put_bignum2(&outgoing_packet
, value
);
530 * Finalizes and sends the packet. If the encryption key has been set,
531 * encrypts the packet before sending.
543 * If using packet compression, compress the payload of the outgoing
546 if (packet_compression
) {
547 buffer_clear(&compression_buffer
);
549 buffer_consume(&outgoing_packet
, 8);
551 buffer_append(&compression_buffer
, "\0\0\0\0\0\0\0\0", 8);
552 buffer_compress(&outgoing_packet
, &compression_buffer
);
553 buffer_clear(&outgoing_packet
);
554 buffer_append(&outgoing_packet
, buffer_ptr(&compression_buffer
),
555 buffer_len(&compression_buffer
));
557 /* Compute packet length without padding (add checksum, remove padding). */
558 len
= buffer_len(&outgoing_packet
) + 4 - 8;
560 /* Insert padding. Initialized to zero in packet_start1() */
561 padding
= 8 - len
% 8;
562 if (!send_context
.plaintext
) {
563 cp
= buffer_ptr(&outgoing_packet
);
564 for (i
= 0; i
< padding
; i
++) {
567 cp
[7 - i
] = rnd
& 0xff;
571 buffer_consume(&outgoing_packet
, 8 - padding
);
573 /* Add check bytes. */
574 checksum
= ssh_crc32(buffer_ptr(&outgoing_packet
),
575 buffer_len(&outgoing_packet
));
576 put_u32(buf
, checksum
);
577 buffer_append(&outgoing_packet
, buf
, 4);
580 fprintf(stderr
, "packet_send plain: ");
581 buffer_dump(&outgoing_packet
);
584 /* Append to output. */
586 buffer_append(&output
, buf
, 4);
587 cp
= buffer_append_space(&output
, buffer_len(&outgoing_packet
));
588 cipher_crypt(&send_context
, cp
, buffer_ptr(&outgoing_packet
),
589 buffer_len(&outgoing_packet
));
592 fprintf(stderr
, "encrypted: ");
593 buffer_dump(&output
);
596 buffer_clear(&outgoing_packet
);
599 * Note that the packet is now only buffered in output. It won't be
600 * actually sent until packet_write_wait or packet_write_poll is
606 set_newkeys(int mode
)
612 u_int64_t
*max_blocks
;
615 debug2("set_newkeys: mode %d", mode
);
617 if (mode
== MODE_OUT
) {
619 crypt_type
= CIPHER_ENCRYPT
;
620 p_send
.packets
= p_send
.blocks
= 0;
621 max_blocks
= &max_blocks_out
;
623 cc
= &receive_context
;
624 crypt_type
= CIPHER_DECRYPT
;
625 p_read
.packets
= p_read
.blocks
= 0;
626 max_blocks
= &max_blocks_in
;
628 if (newkeys
[mode
] != NULL
) {
629 debug("set_newkeys: rekeying");
631 enc
= &newkeys
[mode
]->enc
;
632 mac
= &newkeys
[mode
]->mac
;
633 comp
= &newkeys
[mode
]->comp
;
641 xfree(newkeys
[mode
]);
643 newkeys
[mode
] = kex_get_newkeys(mode
);
644 if (newkeys
[mode
] == NULL
)
645 fatal("newkeys: no keys for mode %d", mode
);
646 enc
= &newkeys
[mode
]->enc
;
647 mac
= &newkeys
[mode
]->mac
;
648 comp
= &newkeys
[mode
]->comp
;
649 if (mac_init(mac
) == 0)
651 DBG(debug("cipher_init_context: %d", mode
));
652 cipher_init(cc
, enc
->cipher
, enc
->key
, enc
->key_len
,
653 enc
->iv
, enc
->block_size
, crypt_type
);
654 /* Deleting the keys does not gain extra security */
655 /* memset(enc->iv, 0, enc->block_size);
656 memset(enc->key, 0, enc->key_len);
657 memset(mac->key, 0, mac->key_len); */
658 if ((comp
->type
== COMP_ZLIB
||
659 (comp
->type
== COMP_DELAYED
&& after_authentication
)) &&
660 comp
->enabled
== 0) {
661 packet_init_compression();
662 if (mode
== MODE_OUT
)
663 buffer_compress_init_send(6);
665 buffer_compress_init_recv();
669 * The 2^(blocksize*2) limit is too expensive for 3DES,
670 * blowfish, etc, so enforce a 1GB limit for small blocksizes.
672 if (enc
->block_size
>= 16)
673 *max_blocks
= (u_int64_t
)1 << (enc
->block_size
*2);
675 *max_blocks
= ((u_int64_t
)1 << 30) / enc
->block_size
;
677 *max_blocks
= MIN(*max_blocks
, rekey_limit
/ enc
->block_size
);
681 * Delayed compression for SSH2 is enabled after authentication:
682 * This happens on the server side after a SSH2_MSG_USERAUTH_SUCCESS is sent,
683 * and on the client side after a SSH2_MSG_USERAUTH_SUCCESS is received.
686 packet_enable_delayed_compress(void)
692 * Remember that we are past the authentication step, so rekeying
693 * with COMP_DELAYED will turn on compression immediately.
695 after_authentication
= 1;
696 for (mode
= 0; mode
< MODE_MAX
; mode
++) {
697 /* protocol error: USERAUTH_SUCCESS received before NEWKEYS */
698 if (newkeys
[mode
] == NULL
)
700 comp
= &newkeys
[mode
]->comp
;
701 if (comp
&& !comp
->enabled
&& comp
->type
== COMP_DELAYED
) {
702 packet_init_compression();
703 if (mode
== MODE_OUT
)
704 buffer_compress_init_send(6);
706 buffer_compress_init_recv();
713 * Finalize packet in SSH2 format (compress, mac, encrypt, enqueue)
716 packet_send2_wrapped(void)
718 u_char type
, *cp
, *macbuf
= NULL
;
720 u_int packet_length
= 0;
728 if (newkeys
[MODE_OUT
] != NULL
) {
729 enc
= &newkeys
[MODE_OUT
]->enc
;
730 mac
= &newkeys
[MODE_OUT
]->mac
;
731 comp
= &newkeys
[MODE_OUT
]->comp
;
733 block_size
= enc
? enc
->block_size
: 8;
735 cp
= buffer_ptr(&outgoing_packet
);
739 fprintf(stderr
, "plain: ");
740 buffer_dump(&outgoing_packet
);
743 if (comp
&& comp
->enabled
) {
744 len
= buffer_len(&outgoing_packet
);
745 /* skip header, compress only payload */
746 buffer_consume(&outgoing_packet
, 5);
747 buffer_clear(&compression_buffer
);
748 buffer_compress(&outgoing_packet
, &compression_buffer
);
749 buffer_clear(&outgoing_packet
);
750 buffer_append(&outgoing_packet
, "\0\0\0\0\0", 5);
751 buffer_append(&outgoing_packet
, buffer_ptr(&compression_buffer
),
752 buffer_len(&compression_buffer
));
753 DBG(debug("compression: raw %d compressed %d", len
,
754 buffer_len(&outgoing_packet
)));
757 /* sizeof (packet_len + pad_len + payload) */
758 len
= buffer_len(&outgoing_packet
);
761 * calc size of padding, alloc space, get random data,
762 * minimum padding is 4 bytes
764 padlen
= block_size
- (len
% block_size
);
766 padlen
+= block_size
;
768 /* will wrap if extra_pad+padlen > 255 */
769 extra_pad
= roundup(extra_pad
, block_size
);
770 pad
= extra_pad
- ((len
+ padlen
) % extra_pad
);
771 debug3("packet_send2: adding %d (len %d padlen %d extra_pad %d)",
772 pad
, len
, padlen
, extra_pad
);
776 cp
= buffer_append_space(&outgoing_packet
, padlen
);
777 if (enc
&& !send_context
.plaintext
) {
779 for (i
= 0; i
< padlen
; i
++) {
787 memset(cp
, 0, padlen
);
789 /* packet_length includes payload, padding and padding length field */
790 packet_length
= buffer_len(&outgoing_packet
) - 4;
791 cp
= buffer_ptr(&outgoing_packet
);
792 put_u32(cp
, packet_length
);
794 DBG(debug("send: len %d (includes padlen %d)", packet_length
+4, padlen
));
796 /* compute MAC over seqnr and packet(length fields, payload, padding) */
797 if (mac
&& mac
->enabled
) {
798 macbuf
= mac_compute(mac
, p_send
.seqnr
,
799 buffer_ptr(&outgoing_packet
),
800 buffer_len(&outgoing_packet
));
801 DBG(debug("done calc MAC out #%d", p_send
.seqnr
));
803 /* encrypt packet and append to output buffer. */
804 cp
= buffer_append_space(&output
, buffer_len(&outgoing_packet
));
805 cipher_crypt(&send_context
, cp
, buffer_ptr(&outgoing_packet
),
806 buffer_len(&outgoing_packet
));
807 /* append unencrypted MAC */
808 if (mac
&& mac
->enabled
)
809 buffer_append(&output
, macbuf
, mac
->mac_len
);
811 fprintf(stderr
, "encrypted: ");
812 buffer_dump(&output
);
814 /* increment sequence number for outgoing packets */
815 if (++p_send
.seqnr
== 0)
816 logit("outgoing seqnr wraps around");
817 if (++p_send
.packets
== 0)
818 if (!(datafellows
& SSH_BUG_NOREKEY
))
819 fatal("XXX too many packets with same key");
820 p_send
.blocks
+= (packet_length
+ 4) / block_size
;
821 buffer_clear(&outgoing_packet
);
823 if (type
== SSH2_MSG_NEWKEYS
)
824 set_newkeys(MODE_OUT
);
825 else if (type
== SSH2_MSG_USERAUTH_SUCCESS
&& server_side
)
826 packet_enable_delayed_compress();
832 static int rekeying
= 0;
836 cp
= buffer_ptr(&outgoing_packet
);
839 /* during rekeying we can only send key exchange messages */
841 if (!((type
>= SSH2_MSG_TRANSPORT_MIN
) &&
842 (type
<= SSH2_MSG_TRANSPORT_MAX
))) {
843 debug("enqueue packet: %u", type
);
844 p
= xmalloc(sizeof(*p
));
846 memcpy(&p
->payload
, &outgoing_packet
, sizeof(Buffer
));
847 buffer_init(&outgoing_packet
);
848 TAILQ_INSERT_TAIL(&outgoing
, p
, next
);
853 /* rekeying starts with sending KEXINIT */
854 if (type
== SSH2_MSG_KEXINIT
)
857 packet_send2_wrapped();
859 /* after a NEWKEYS message we can send the complete queue */
860 if (type
== SSH2_MSG_NEWKEYS
) {
862 while ((p
= TAILQ_FIRST(&outgoing
))) {
864 debug("dequeue packet: %u", type
);
865 buffer_free(&outgoing_packet
);
866 memcpy(&outgoing_packet
, &p
->payload
,
868 TAILQ_REMOVE(&outgoing
, p
, next
);
870 packet_send2_wrapped();
882 DBG(debug("packet_send done"));
886 * Waits until a packet has been received, and returns its type. Note that
887 * no other data is processed until this returns, so this function should not
888 * be used during the interactive session.
892 packet_read_seqnr(u_int32_t
*seqnr_p
)
897 DBG(debug("packet_read()"));
899 setp
= (fd_set
*)xcalloc(howmany(connection_in
+1, NFDBITS
),
902 /* Since we are blocking, ensure that all written packets have been sent. */
905 /* Stay in the loop until we have received a complete packet. */
907 /* Try to read a packet from the buffer. */
908 type
= packet_read_poll_seqnr(seqnr_p
);
910 type
== SSH_SMSG_SUCCESS
911 || type
== SSH_SMSG_FAILURE
912 || type
== SSH_CMSG_EOF
913 || type
== SSH_CMSG_EXIT_CONFIRMATION
))
915 /* If we got a packet, return it. */
916 if (type
!= SSH_MSG_NONE
) {
921 * Otherwise, wait for some data to arrive, add it to the
922 * buffer, and try again.
924 memset(setp
, 0, howmany(connection_in
+ 1, NFDBITS
) *
926 FD_SET(connection_in
, setp
);
928 /* Wait for some data to arrive. */
929 while (select(connection_in
+ 1, setp
, NULL
, NULL
, NULL
) == -1 &&
930 (errno
== EAGAIN
|| errno
== EINTR
))
933 /* Read data from the socket. */
934 len
= read(connection_in
, buf
, sizeof(buf
));
936 logit("Connection closed by %.200s", get_remote_ipaddr());
940 fatal("Read from socket failed: %.100s", strerror(errno
));
941 /* Append it to the buffer. */
942 packet_process_incoming(buf
, len
);
950 return packet_read_seqnr(NULL
);
954 * Waits until a packet has been received, verifies that its type matches
955 * that given, and gives a fatal error and exits if there is a mismatch.
959 packet_read_expect(int expected_type
)
963 type
= packet_read();
964 if (type
!= expected_type
)
965 packet_disconnect("Protocol error: expected packet type %d, got %d",
966 expected_type
, type
);
969 /* Checks if a full packet is available in the data received so far via
970 * packet_process_incoming. If so, reads the packet; otherwise returns
971 * SSH_MSG_NONE. This does not wait for data from the connection.
973 * SSH_MSG_DISCONNECT is handled specially here. Also,
974 * SSH_MSG_IGNORE messages are skipped by this function and are never returned
979 packet_read_poll1(void)
981 u_int len
, padded_len
;
983 u_int checksum
, stored_checksum
;
985 /* Check if input size is less than minimum packet size. */
986 if (buffer_len(&input
) < 4 + 8)
988 /* Get length of incoming packet. */
989 cp
= buffer_ptr(&input
);
991 if (len
< 1 + 2 + 2 || len
> 256 * 1024)
992 packet_disconnect("Bad packet length %u.", len
);
993 padded_len
= (len
+ 8) & ~7;
995 /* Check if the packet has been entirely received. */
996 if (buffer_len(&input
) < 4 + padded_len
)
999 /* The entire packet is in buffer. */
1001 /* Consume packet length. */
1002 buffer_consume(&input
, 4);
1005 * Cryptographic attack detector for ssh
1006 * (C)1998 CORE-SDI, Buenos Aires Argentina
1007 * Ariel Futoransky(futo@core-sdi.com)
1009 if (!receive_context
.plaintext
) {
1010 switch (detect_attack(buffer_ptr(&input
), padded_len
)) {
1011 case DEATTACK_DETECTED
:
1012 packet_disconnect("crc32 compensation attack: "
1013 "network attack detected");
1014 case DEATTACK_DOS_DETECTED
:
1015 packet_disconnect("deattack denial of "
1016 "service detected");
1020 /* Decrypt data to incoming_packet. */
1021 buffer_clear(&incoming_packet
);
1022 cp
= buffer_append_space(&incoming_packet
, padded_len
);
1023 cipher_crypt(&receive_context
, cp
, buffer_ptr(&input
), padded_len
);
1025 buffer_consume(&input
, padded_len
);
1028 fprintf(stderr
, "read_poll plain: ");
1029 buffer_dump(&incoming_packet
);
1032 /* Compute packet checksum. */
1033 checksum
= ssh_crc32(buffer_ptr(&incoming_packet
),
1034 buffer_len(&incoming_packet
) - 4);
1037 buffer_consume(&incoming_packet
, 8 - len
% 8);
1039 /* Test check bytes. */
1040 if (len
!= buffer_len(&incoming_packet
))
1041 packet_disconnect("packet_read_poll1: len %d != buffer_len %d.",
1042 len
, buffer_len(&incoming_packet
));
1044 cp
= (u_char
*)buffer_ptr(&incoming_packet
) + len
- 4;
1045 stored_checksum
= get_u32(cp
);
1046 if (checksum
!= stored_checksum
)
1047 packet_disconnect("Corrupted check bytes on input.");
1048 buffer_consume_end(&incoming_packet
, 4);
1050 if (packet_compression
) {
1051 buffer_clear(&compression_buffer
);
1052 buffer_uncompress(&incoming_packet
, &compression_buffer
);
1053 buffer_clear(&incoming_packet
);
1054 buffer_append(&incoming_packet
, buffer_ptr(&compression_buffer
),
1055 buffer_len(&compression_buffer
));
1057 type
= buffer_get_char(&incoming_packet
);
1058 if (type
< SSH_MSG_MIN
|| type
> SSH_MSG_MAX
)
1059 packet_disconnect("Invalid ssh1 packet type: %d", type
);
1064 packet_read_poll2(u_int32_t
*seqnr_p
)
1066 static u_int packet_length
= 0;
1068 u_char
*macbuf
, *cp
, type
;
1069 u_int maclen
, block_size
;
1074 if (newkeys
[MODE_IN
] != NULL
) {
1075 enc
= &newkeys
[MODE_IN
]->enc
;
1076 mac
= &newkeys
[MODE_IN
]->mac
;
1077 comp
= &newkeys
[MODE_IN
]->comp
;
1079 maclen
= mac
&& mac
->enabled
? mac
->mac_len
: 0;
1080 block_size
= enc
? enc
->block_size
: 8;
1082 if (packet_length
== 0) {
1084 * check if input size is less than the cipher block size,
1085 * decrypt first block and extract length of incoming packet
1087 if (buffer_len(&input
) < block_size
)
1088 return SSH_MSG_NONE
;
1089 buffer_clear(&incoming_packet
);
1090 cp
= buffer_append_space(&incoming_packet
, block_size
);
1091 cipher_crypt(&receive_context
, cp
, buffer_ptr(&input
),
1093 cp
= buffer_ptr(&incoming_packet
);
1094 packet_length
= get_u32(cp
);
1095 if (packet_length
< 1 + 4 || packet_length
> 256 * 1024) {
1097 buffer_dump(&incoming_packet
);
1099 packet_disconnect("Bad packet length %u.", packet_length
);
1101 DBG(debug("input: packet len %u", packet_length
+4));
1102 buffer_consume(&input
, block_size
);
1104 /* we have a partial packet of block_size bytes */
1105 need
= 4 + packet_length
- block_size
;
1106 DBG(debug("partial packet %d, need %d, maclen %d", block_size
,
1108 if (need
% block_size
!= 0)
1109 fatal("padding error: need %d block %d mod %d",
1110 need
, block_size
, need
% block_size
);
1112 * check if the entire packet has been received and
1113 * decrypt into incoming_packet
1115 if (buffer_len(&input
) < need
+ maclen
)
1116 return SSH_MSG_NONE
;
1118 fprintf(stderr
, "read_poll enc/full: ");
1119 buffer_dump(&input
);
1121 cp
= buffer_append_space(&incoming_packet
, need
);
1122 cipher_crypt(&receive_context
, cp
, buffer_ptr(&input
), need
);
1123 buffer_consume(&input
, need
);
1125 * compute MAC over seqnr and packet,
1126 * increment sequence number for incoming packet
1128 if (mac
&& mac
->enabled
) {
1129 macbuf
= mac_compute(mac
, p_read
.seqnr
,
1130 buffer_ptr(&incoming_packet
),
1131 buffer_len(&incoming_packet
));
1132 if (memcmp(macbuf
, buffer_ptr(&input
), mac
->mac_len
) != 0)
1133 packet_disconnect("Corrupted MAC on input.");
1134 DBG(debug("MAC #%d ok", p_read
.seqnr
));
1135 buffer_consume(&input
, mac
->mac_len
);
1137 if (seqnr_p
!= NULL
)
1138 *seqnr_p
= p_read
.seqnr
;
1139 if (++p_read
.seqnr
== 0)
1140 logit("incoming seqnr wraps around");
1141 if (++p_read
.packets
== 0)
1142 if (!(datafellows
& SSH_BUG_NOREKEY
))
1143 fatal("XXX too many packets with same key");
1144 p_read
.blocks
+= (packet_length
+ 4) / block_size
;
1147 cp
= buffer_ptr(&incoming_packet
);
1149 DBG(debug("input: padlen %d", padlen
));
1151 packet_disconnect("Corrupted padlen %d on input.", padlen
);
1153 /* skip packet size + padlen, discard padding */
1154 buffer_consume(&incoming_packet
, 4 + 1);
1155 buffer_consume_end(&incoming_packet
, padlen
);
1157 DBG(debug("input: len before de-compress %d", buffer_len(&incoming_packet
)));
1158 if (comp
&& comp
->enabled
) {
1159 buffer_clear(&compression_buffer
);
1160 buffer_uncompress(&incoming_packet
, &compression_buffer
);
1161 buffer_clear(&incoming_packet
);
1162 buffer_append(&incoming_packet
, buffer_ptr(&compression_buffer
),
1163 buffer_len(&compression_buffer
));
1164 DBG(debug("input: len after de-compress %d",
1165 buffer_len(&incoming_packet
)));
1168 * get packet type, implies consume.
1169 * return length of payload (without type field)
1171 type
= buffer_get_char(&incoming_packet
);
1172 if (type
< SSH2_MSG_MIN
|| type
>= SSH2_MSG_LOCAL_MIN
)
1173 packet_disconnect("Invalid ssh2 packet type: %d", type
);
1174 if (type
== SSH2_MSG_NEWKEYS
)
1175 set_newkeys(MODE_IN
);
1176 else if (type
== SSH2_MSG_USERAUTH_SUCCESS
&& !server_side
)
1177 packet_enable_delayed_compress();
1179 fprintf(stderr
, "read/plain[%d]:\r\n", type
);
1180 buffer_dump(&incoming_packet
);
1182 /* reset for next packet */
1188 packet_read_poll_seqnr(u_int32_t
*seqnr_p
)
1190 u_int reason
, seqnr
;
1196 type
= packet_read_poll2(seqnr_p
);
1198 keep_alive_timeouts
= 0;
1199 DBG(debug("received packet type %d", type
));
1202 case SSH2_MSG_IGNORE
:
1203 debug3("Received SSH2_MSG_IGNORE");
1205 case SSH2_MSG_DEBUG
:
1207 msg
= packet_get_string(NULL
);
1208 debug("Remote: %.900s", msg
);
1210 msg
= packet_get_string(NULL
);
1213 case SSH2_MSG_DISCONNECT
:
1214 reason
= packet_get_int();
1215 msg
= packet_get_string(NULL
);
1216 logit("Received disconnect from %s: %u: %.400s",
1217 get_remote_ipaddr(), reason
, msg
);
1221 case SSH2_MSG_UNIMPLEMENTED
:
1222 seqnr
= packet_get_int();
1223 debug("Received SSH2_MSG_UNIMPLEMENTED for %u",
1230 type
= packet_read_poll1();
1232 case SSH_MSG_IGNORE
:
1235 msg
= packet_get_string(NULL
);
1236 debug("Remote: %.900s", msg
);
1239 case SSH_MSG_DISCONNECT
:
1240 msg
= packet_get_string(NULL
);
1241 logit("Received disconnect from %s: %.400s",
1242 get_remote_ipaddr(), msg
);
1247 DBG(debug("received packet type %d", type
));
1255 packet_read_poll(void)
1257 return packet_read_poll_seqnr(NULL
);
1261 * Buffers the given amount of input characters. This is intended to be used
1262 * together with packet_read_poll.
1266 packet_process_incoming(const char *buf
, u_int len
)
1268 buffer_append(&input
, buf
, len
);
1271 /* Returns a character from the packet. */
1274 packet_get_char(void)
1278 buffer_get(&incoming_packet
, &ch
, 1);
1282 /* Returns an integer from the packet data. */
1285 packet_get_int(void)
1287 return buffer_get_int(&incoming_packet
);
1291 * Returns an arbitrary precision integer from the packet data. The integer
1292 * must have been initialized before this call.
1296 packet_get_bignum(BIGNUM
* value
)
1298 buffer_get_bignum(&incoming_packet
, value
);
1302 packet_get_bignum2(BIGNUM
* value
)
1304 buffer_get_bignum2(&incoming_packet
, value
);
1308 packet_get_raw(u_int
*length_ptr
)
1310 u_int bytes
= buffer_len(&incoming_packet
);
1312 if (length_ptr
!= NULL
)
1313 *length_ptr
= bytes
;
1314 return buffer_ptr(&incoming_packet
);
1318 packet_remaining(void)
1320 return buffer_len(&incoming_packet
);
1324 * Returns a string from the packet data. The string is allocated using
1325 * xmalloc; it is the responsibility of the calling program to free it when
1326 * no longer needed. The length_ptr argument may be NULL, or point to an
1327 * integer into which the length of the string is stored.
1331 packet_get_string(u_int
*length_ptr
)
1333 return buffer_get_string(&incoming_packet
, length_ptr
);
1337 packet_get_string_ptr(u_int
*length_ptr
)
1339 return buffer_get_string_ptr(&incoming_packet
, length_ptr
);
1343 * Sends a diagnostic message from the server to the client. This message
1344 * can be sent at any time (but not while constructing another message). The
1345 * message is printed immediately, but only if the client is being executed
1346 * in verbose mode. These messages are primarily intended to ease debugging
1347 * authentication problems. The length of the formatted message must not
1348 * exceed 1024 bytes. This will automatically call packet_write_wait.
1352 packet_send_debug(const char *fmt
,...)
1357 if (compat20
&& (datafellows
& SSH_BUG_DEBUG
))
1360 va_start(args
, fmt
);
1361 vsnprintf(buf
, sizeof(buf
), fmt
, args
);
1365 packet_start(SSH2_MSG_DEBUG
);
1366 packet_put_char(0); /* bool: always display */
1367 packet_put_cstring(buf
);
1368 packet_put_cstring("");
1370 packet_start(SSH_MSG_DEBUG
);
1371 packet_put_cstring(buf
);
1374 packet_write_wait();
1378 * Logs the error plus constructs and sends a disconnect packet, closes the
1379 * connection, and exits. This function never returns. The error message
1380 * should not contain a newline. The length of the formatted message must
1381 * not exceed 1024 bytes.
1385 packet_disconnect(const char *fmt
,...)
1389 static int disconnecting
= 0;
1391 if (disconnecting
) /* Guard against recursive invocations. */
1392 fatal("packet_disconnect called recursively.");
1396 * Format the message. Note that the caller must make sure the
1397 * message is of limited size.
1399 va_start(args
, fmt
);
1400 vsnprintf(buf
, sizeof(buf
), fmt
, args
);
1403 /* Display the error locally */
1404 logit("Disconnecting: %.100s", buf
);
1406 /* Send the disconnect message to the other side, and wait for it to get sent. */
1408 packet_start(SSH2_MSG_DISCONNECT
);
1409 packet_put_int(SSH2_DISCONNECT_PROTOCOL_ERROR
);
1410 packet_put_cstring(buf
);
1411 packet_put_cstring("");
1413 packet_start(SSH_MSG_DISCONNECT
);
1414 packet_put_cstring(buf
);
1417 packet_write_wait();
1419 /* Stop listening for connections. */
1420 channel_close_all();
1422 /* Close the connection. */
1427 /* Checks if there is any buffered output, and tries to write some of the output. */
1430 packet_write_poll(void)
1432 int len
= buffer_len(&output
);
1435 len
= write(connection_out
, buffer_ptr(&output
), len
);
1437 if (errno
== EAGAIN
)
1440 fatal("Write failed: %.100s", strerror(errno
));
1442 buffer_consume(&output
, len
);
1447 * Calls packet_write_poll repeatedly until all pending output data has been
1452 packet_write_wait(void)
1456 setp
= (fd_set
*)xcalloc(howmany(connection_out
+ 1, NFDBITS
),
1458 packet_write_poll();
1459 while (packet_have_data_to_write()) {
1460 memset(setp
, 0, howmany(connection_out
+ 1, NFDBITS
) *
1462 FD_SET(connection_out
, setp
);
1463 while (select(connection_out
+ 1, NULL
, setp
, NULL
, NULL
) == -1 &&
1464 (errno
== EAGAIN
|| errno
== EINTR
))
1466 packet_write_poll();
1471 /* Returns true if there is buffered data to write to the connection. */
1474 packet_have_data_to_write(void)
1476 return buffer_len(&output
) != 0;
1479 /* Returns true if there is not too much data to write to the connection. */
1482 packet_not_very_much_data_to_write(void)
1484 if (interactive_mode
)
1485 return buffer_len(&output
) < 16384;
1487 return buffer_len(&output
) < 128 * 1024;
1492 packet_set_tos(int interactive
)
1494 #if defined(IP_TOS) && !defined(IP_TOS_IS_BROKEN)
1495 int tos
= interactive
? IPTOS_LOWDELAY
: IPTOS_THROUGHPUT
;
1497 if (!packet_connection_is_on_socket() ||
1498 !packet_connection_is_ipv4())
1500 if (setsockopt(connection_in
, IPPROTO_IP
, IP_TOS
, &tos
,
1502 error("setsockopt IP_TOS %d: %.100s:",
1503 tos
, strerror(errno
));
1507 /* Informs that the current session is interactive. Sets IP flags for that. */
1510 packet_set_interactive(int interactive
)
1512 static int called
= 0;
1518 /* Record that we are in interactive mode. */
1519 interactive_mode
= interactive
;
1521 /* Only set socket options if using a socket. */
1522 if (!packet_connection_is_on_socket())
1524 set_nodelay(connection_in
);
1525 packet_set_tos(interactive
);
1528 /* Returns true if the current connection is interactive. */
1531 packet_is_interactive(void)
1533 return interactive_mode
;
1537 packet_set_maxsize(u_int s
)
1539 static int called
= 0;
1542 logit("packet_set_maxsize: called twice: old %d new %d",
1543 max_packet_size
, s
);
1546 if (s
< 4 * 1024 || s
> 1024 * 1024) {
1547 logit("packet_set_maxsize: bad size %d", s
);
1551 debug("packet_set_maxsize: setting to %d", s
);
1552 max_packet_size
= s
;
1556 /* roundup current message to pad bytes */
1558 packet_add_padding(u_char pad
)
1564 * 9.2. Ignored Data Message
1566 * byte SSH_MSG_IGNORE
1569 * All implementations MUST understand (and ignore) this message at any
1570 * time (after receiving the protocol version). No implementation is
1571 * required to send them. This message can be used as an additional
1572 * protection measure against advanced traffic analysis techniques.
1575 packet_send_ignore(int nbytes
)
1580 packet_start(compat20
? SSH2_MSG_IGNORE
: SSH_MSG_IGNORE
);
1581 packet_put_int(nbytes
);
1582 for (i
= 0; i
< nbytes
; i
++) {
1585 packet_put_char((u_char
)rnd
& 0xff);
1590 #define MAX_PACKETS (1U<<31)
1592 packet_need_rekeying(void)
1594 if (datafellows
& SSH_BUG_NOREKEY
)
1597 (p_send
.packets
> MAX_PACKETS
) ||
1598 (p_read
.packets
> MAX_PACKETS
) ||
1599 (max_blocks_out
&& (p_send
.blocks
> max_blocks_out
)) ||
1600 (max_blocks_in
&& (p_read
.blocks
> max_blocks_in
));
1604 packet_set_rekey_limit(u_int32_t bytes
)
1606 rekey_limit
= bytes
;
1610 packet_set_server(void)
1616 packet_set_authenticated(void)
1618 after_authentication
= 1;